Homebrew introduced a new default prefix for Apple Silicon machines,
so that both arm64 and x86_64 packages can be co-installed on a single
system.
The intel packages are installed into /usr/local and the arm64
packages are installed into /opt/homebrew.
For Qt building purposes, we don't want to find packages in any of
homebrew's prefixes unless explicitly requested by the user
Currently our arm64 macOS CI config does pick up system libs under new
prefix.
Remove the new path from the system prefixes.
Amends f3c7d22dd0
Task-number: QTBUG-85447
Change-Id: I381d31c95bcdab26147a331444ba40c7af9d0a95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
So that the correct version is generated in top-level builds.
Change-Id: I360370815ce178564cc79157dc61d70adfd4f947
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Documented the fall-back process by which QLocale selects an actual
locale based on what it is asked for. The prior documentation was
wrong.
In the process, removed some out-of-date claims about QString's
toInt() and toDouble() caring about the default locale; and caught a
few more cases (in \internal docs) of country -> territory.
Fixes: QTBUG-90962
Change-Id: I5e7cfa66443c9335a71fb2048c3f2ebf7af64573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously the (language, territory) constructor had optional
territory; however, the (language, script, territory) one required all
three. Making the latter's script and territory optional, while
requiring the former to pass territory, makes it possible to construct
with (language), with (language, territory), with (language, script)
or with (language, script, territory), without (overt) use of AnyScrit
or AnyTerritory.
Change-Id: Iaf6e46c473042d886eee7068515f9e41a704c2e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The use of "Country" is misleading as some entries in the enumeration
are not countries (eg, HongKong), for all that most are. The Unicode
Consortium's Common Locale Data Repository (CLDR, from which QLocale's
data is taken) calls these territories, so introduce territory-based
names and prepare to deprecate the country-based ones in due course.
[ChangeLog][QtCore][QLocale] QLocale now has Territory as an alias for
its Country enumeration, and associated territory-based names to match
its country-named methods, to better match the usage in relevant
standards. The country-based names shall in due course be deprecated
in favor of the territory-based names.
Fixes: QTBUG-91686
Change-Id: Ia1ae1ad7323867016186fb775c9600cd5113aa42
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With this enumeration value, users can get the width of
the current font TAB character more conveniently
In addition, added some documentation about where
users may use this enumeration.
Fixes: QTBUG-92205
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I9794b7553e9299e351f9182de02866d07a1393fc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Looks like these ones have been forgotten in the Qt 5 -> 6 upgrade
to qsizetype. Change them to return qsizetype as well,
and fix the docs. Being entirely inline, non-exported classes, we
should be able to get away with it without affecting binary
compatibility. Moreover, there's no reason for keeping them
deprecated.
Requires some minor adjustments, just like the ones done for
size()'s changes.
[ChangeLog][QtCore][QStringView] The length() function
now returns `qsizetype`, not `int`, for consistency with the
other string and container classes in Qt. Following this
change, it has been un-deprecated.
[ChangeLog][QtCore][QAnyStringView] The length() function
now returns `qsizetype`, not `int`, for consistency with the
other string and container classes in Qt. Following this
change, it has been un-deprecated.
[ChangeLog][QtCore][QUtf8StringView] The length() function
now returns `qsizetype`, not `int`, for consistency with the
other string and container classes in Qt. Following this
change, it has been un-deprecated.
[ChangeLog][QtCore][QByteArrayView] The length() function
now returns `qsizetype`, not `int`, for consistency with the
other string and container classes in Qt. Following this
change, it has been un-deprecated.
Fixes: QTBUG-92496
Change-Id: Ie0f4939d1083884e95d4725f891b6c6764532cb8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The find script checked for UIKIT which is set during a Qt build
in QtPlaformSupport.cmake but is not set when building a user project.
This casused the find script to skip the iOS specific code that
passed the -framework OpenGLES linker flag.
This broke SDK switching in Xcode.
Check the IOS variable instead which is set by CMake for all projects
that pass -DCMAKE_SYSTEM_NAME=iOS.
Pick-to: 6.1
Change-Id: I9bd088f317917544ccfeff61fc4ff90f18f0f3d8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since conversion operators do implicit conversion that might bring
some potential issues while using the API, let's stick to having
an operator* instead.
Pick-to: 6.1 6.1.0
Change-Id: Ie7ad5537958944b8d1c11d69fbd30284b4b0344d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
We want right - left, but the numbers we have are (1 - left) and right,
so we need right - (1 - left) = right + left - 1.
Pick-to: 6.1 6.0
Fixes: QTBUG-91957
Fixes: QTBUG-92485
Change-Id: I238cbbe1eebddff1ce56da38127899cdbd21db0e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When stroking a dashed path, an unnecessary amount of processing would
be spent if there is a huge number of dashes visible, e.g. because of
scaling. Since the dashes are too small to be indivdually visible
anyway, just replace with a semi-transparent solid line for such
cases.
Pick-to: 6.1 6.0 5.15
Change-Id: I9e9f7861257ad5bce46a0cf113d1a9d7824911e6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As suggested in the API review.
Amends 37bd7b5733
Pick-to: 6.1 6.1.0
Change-Id: Ic3e8567f349568dc3b4dbf79be27c304b39480cf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before this change, we created a CMake toolchain file for iOS and
macOS universal which propagated the initially configured
CMAKE_OSX_ARCHITECTURES values to user projects.
So if Qt was configured with 2 arches, configuring a CMake user
project using the generated toolchain file would also build the
user project targeting those 2 arches.
The reason for this that the same toolchain file is used for
configuring both Qt and users projects and we needed to ensure that
other Qt repos are built with the same set of arches. That
unfortunately led the multiple arches to carry over into user
projects.
This is different from qmake behavior which configured user projects
with 1 arch only.
Instead of the toolchain file explicitly setting
CMAKE_OSX_ARCHITECTURES for all projects, save the initial list of
arches into QT_OSX_ARCHITECTURES.
Then if the toolchain file detects that we're building a Qt repo (by
checking for the presence of QT_REPO_MODULE_VERSION) set
CMAKE_OSX_ARCHITECTURES to QT_OSX_ARCHITECTURES to propagate the
initial list of arches.
For user projects we want to have some sensible defaults.
For macOS projects, leave the decision of the architecture to build
to CMake.
For iOS Xcode projects, leave the decision to Xcode.
For iOS Ninja projects, set the architecture to the first value of the
architectures used when configuring Qt.
As a side note this fixes an issue in our CI where we configured macOS
Qt with 2 architectures and then tried to run CMake build tests for
both architectures on a machine that doesn't have the universal SDK.
This led to build failures.
Because the CMake build tests act as regular user projects, now they
are configured with a single architecture that is automtically
detected by CMake.
Pick-to: 6.1
Task-number: QTBUG-85447
Change-Id: Id1b7e78d7e67c1796efed10751416e5f857c16d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The POSIX rule parser used by QTzTimeZonePrivate recklessly assumed
that, if splitting the rule on a dot produced more than one part, it
necessarily produced at least three. That's true for well-formed POSIX
rules, but we should catch the case of malformed rules.
Likewise, when calculating the dates of transitions, splitting the
date rule on dots might produce too few fragments; and the fragments
might not parse as valid numbers, or might be out of range for their
respective fields in a date. Check all these cases, too.
Added a test that crashed previously. Changed
QTimeZone::offsetFromUtc() so that its "return zero on invalid"
applies also to the case where the backend returns invalid, in
support of this.
Fixes: QTBUG-92808
Pick-to: 6.1 6.1.0 6.0 5.15
Change-Id: Ica383a7a987465483341bdef8dcfd42edb6b43d6
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
On Windows, on exit, the backend will deref (and then implicitly start
deletion of) a COM object. This object tries to communicate with an
object in another thread, though it seems this other thread quits before
the main thread in _most_ cases.
To get around this we move the deletion to earlier in the program. While
this is only reported as a Windows issue it makes for more consistent
behavior if all platforms behave the same.
Document and test that recreation of QNI works as expected after the
destruction (and recreation) of QCoreApplication.
Amends: 0875626e22
Fixes: QTBUG-92568
Pick-to: 6.1 6.1.0
Change-Id: Iffc07f38673019aa059efd4d64d2ad706a03f6fe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The CoreMotion is required by the QtSensor module.
Task-number: QTBUG-92502
Change-Id: I7f1853131aa96b2cb052862d5bf492df5ec18150
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
I don't like how it looks, so make stop() work even if it's not
monitoring so that the dtor can call it unconditionally, and without
needing a CoUninitialize call of its own.
Change-Id: I06832d7e1d34317ff49ea2c425c79588719d7cd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A few methods in QBindable which do not modify anything were not marked
as const so far. This adds the missing const, and a test to verify that
they work.
As all methods are fully inline, this does not cause any binary
compatibility issues.
Fixes: QTBUG-89508
Change-Id: If06d33bc405232887b8c371c268840ba34dbadf6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The example refines the image by running a number of passes
with increasing number of iterations, which is not really
visible to the user. Set an informational text string on
the generated image which provides this information
along with the elapsed time.
The idea is to do the same to the corresponding
Qt for Python example to have some sort of speed comparison
for number crunching.
Add a command line option for the number of passes.
Make the window a bit larger to accommodate the
information.
Change-Id: I2afc1009ab53b580123d82a6aa645d9ffaa63ea2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
When changing the active action via QMenu::setActiveAction
the menu will scroll to the active action, but we were
scrolling the menu also when the active action was null,
resulting in the menu scrolling back to the top.
We fix this by guarding the call to scrollMenu.
Fixes: QTBUG-92096
Pick-to: 5.15 6.0 6.1
Change-Id: I998f99ddacec32640834d59a907d569fdda458f0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add documentation which specifies that bindable properties cannot
be used in a multithreaded context.
Actually, they can be read when the owning thread is suspended
completely, but this should only be used by Qt internally.
Task-number: QTBUG-90511
Change-Id: I87effac3aea35205f05151cba3c95816da9a5c9d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Change-Id: I5de0510d06b7d8e10c3cb0d4f23fb7991b8d6c51
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
