TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Removing connections and resizing the signal vector now
happens in a way that will not interfere with activate(),
as the old objects won't get deleted if we are somewhere
inside a signal emission.
This means that we don't need to lock the senders mutex
in activate anymore, as long as the reference counting
on the ConnectionData is atomic and we are in the senders
thread.
This implies that we now need to lock the receivers mutex in
queued_activate() abd blocking queued activation to ensure
it hasn't been deleted while we are emitting.
In addition, some precautions need to be taken to not read
from the receiver without holding the lock, as it could get
deleted while we're activating (if it's in a different thread).
To make that possible store the receivers thread id in the
connection data.
Use atomic pointers for all variables that can get modified
with the signalSlotLock() held and that are being read
without the lock being held.
This gives us a very nice additional speed improvement
for signal emissions.
without change with change
string based connect: 3287 2436
pointer based connect: 3941 3265
not connected: 403 400
disconnected: 460 489
5 slots connected: 9112 4515
Change-Id: Ib7324bb74c389dcc3b6581a03c31469a6e589fc2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
And use it to clean up the reimplementations in Qt DBus.
Change-Id: I8e3fe35e8db6405cbcbfb45b42a8f2efecc1cef0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixed the other tests that used the methods, so that they now get the
data from QLocale instead; and added the missing feature #if-ery, as
these are textdate methods.
Change-Id: I896f356bdf88037db23590c71d0aeb0b8722bfa7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The code had min and max of an integral type and tested min + min / 2,
which naturally overflowed, provoking a compiler warning. The test
was meant to be testing min - min / 2; but min is even, so this is
just min / 2; and doubling that won't overflow (which is what the test
is about). As it happens, min + min / 2 is in fact max - max / 2,
which *would* be a good value to test, since max is odd. So add a
test for that and remove the broken test.
Change-Id: Iec34acbf0d5d7993d41ff844875dc10480b8eb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Don't just wait for 300ms for the thread to finish, this can
lead to faling tests esp. on slow hardware.
Also fix a mem leak.
Change-Id: Ifa90da5507fc6d65ef77e368d7c238271623ff53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Configure will print notes in the following situations:
- redundant options, e.g. -gui -gui
- contradictory options, e.g. -gui -no-gui
Fixes: QTBUG-53499
Change-Id: I6cf023e7730907069cf971f5982a41453f611c3c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use move on the existing value as well so the constructor makes more
of a difference.
Change-Id: Iee2080da7b7d2d88eb108f0448c61423c7256979
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This benchmark was not compiled, and it only covered some parts of the
API. Enable it, and also measure the performance of PMF and Functor API
variants, for both QTimer::singleShot and QMetaObject::invokeMethod.
This uncovers that the zero-timeout optimization for the singleShot is
not applied to the PMF and Functor API variants:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.11.0, Qt 5.11.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.2.1 20171224)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
5.20 msecs per iteration (total: 520, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
75.93 msecs per iteration (total: 7,594, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
77.90 msecs per iteration (total: 7,790, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
76.23 msecs per iteration (total: 7,624, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
4.99 msecs per iteration (total: 499, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
5.37 msecs per iteration (total: 538, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
4.74 msecs per iteration (total: 474, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 9 passed, 0 failed, 0 skipped, 0 blacklisted, 50220ms
********* Finished testing of qtimer_vs_qmetaobject *********
Change-Id: I46336613188317124804638627f07eb135dc0286
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It is documented for the use, but we were rarely using it.
Change-Id: I812b9e6c8fbf204aba43ce2b79eca308ca75de88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And export the required symbols in OpenSSL so we can run the test there
as well even if it's not needed for any functionality.
Change-Id: I4246d2b0bbdd42079d255f97f3c66ce8bb37390b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Doing endian-dependent selection of bytes of the value was a clumsy
surrogate for just accessing the intenal quint16 shifted suitably.
Change-Id: Icfd9d1d18f69eb94b041b8d32275df606c14c2b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSqlError::text() returns single space if QSqlError is not valid. In
addition, it adds space in case one of driverText or databaseText
is empty.
Change condition upon which space is added between databaseText and
driverText, and update unit test to cover these cases.
Fixes: QTBUG-74575
Change-Id: I52cce9b0287a523d7ff9059cff38bcd8b26eb303
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Change d15b02ff29 was missing the
implementation of:
void setData(int xOffset, int yOffset, int zOffset,
int width, int height, int depth, int mipLevel,
PixelFormat sourceFormat, PixelType sourceType,
const void *data, const QOpenGLPixelTransferOptions * const options = nullptr);
Change-Id: Ie0d1679cc54bc6bd6b51392a22707566d238845a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When using a style that wants to draw into the layout's margin (like
macOS style does with group box titles), parts of the widgets would be
clipped by the parent if the available margin is smaller than necessary.
This moves the x/y coordinates to at least 0/0, and adjusts width and
height accordingly.
[ChangeLog][QtWidgets][QLayout] Prevent clipping of group box titles
on macOS (and similar styles that draw into layout margins)
Change-Id: I32148a92858c13fb2325da4d0a2a58996e0e8930
Fixes: QTBUG-67608
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Enabling makes QtQuick to attempt to access window.devicePixelRatio
[via QWasmWindow::devicePixelRatio()] from a web worker.
Change-Id: I957df29060c7eb8c47d02bc67c8c5c2219b570f4
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
[ChangeLog][QtCore] Added support of deduction guides for QPair
Change-Id: I41a798390dc2c925b0f8432ba12aa345724de2d7
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
QKeyEvent instance requires Qt::Key but currently X11 keysym is assigned
and the IBus QT module forwards the wrong key events.
Now QXkbCommon::keysymToQtKey() can generate Qt::Key from keysym and
forward the correct key events.
Change-Id: I25f0a9e9319b4a5f42847f8592ad3a30f6c9349d
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
... because API from qxkbcommon_p.h includes xkbcommon headers.
When we use "QT += xkbcommon_support-private" in *.pro files, we
should not explicitly require "QMAKE_USE += xkbcommon" in those
projects.
Change-Id: I21049034ce93bee13a1107723f26498c221f8ea4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add a field remembering the tab position of the dock widget area to
QDockWidgetPrivate and use that when grouping floating docks.
Fixes: QTBUG-74242
Change-Id: I2a453080cb39dd4a5491976f1aeca70ae681682a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This document is bound to run out of sync with reality. Actually there are
changes from Qt4.x missing. The streaming operators of the classes contain
many if-then-else cases, making it difficult to represented in a plain text.
With only a partial definition of the protocol, this document is useless to
users, because they should not care how the actual protocol is implemented.
Fixes: QTBUG-73386
Change-Id: I7fc4066ef8186d54dfd48445452c1a6d8bf371c3
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They are the only Qt symbols neither prefixed with q or with the Qt
namespace. This changes preserves source and binary compatibility
while making it possible to define conflicting symbols.
Change-Id: I6d4181206e63faa922fa0c8b644e0a4b88826a97
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is flaky which was uncovered by the upcoming
QTimer::singleShot optimization patches:
When the Emitter's thread is started and executes the timout functor
before the state machine is started, then the state machine will never
see the emitSignalWithNoArg signal and thus never transition to the
final state and finish.
This patch ensures that the code in the background thread is only run
after the state machine was started to fix this flakyness.
Change-Id: I6f91a2420165662ece75e550a6d73fe098137d4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
The logic for removing QScreens from QGuiApplicationPrivate has been
moved into the QScreen destructor, similar to QWindow.
Change-Id: I18ad57d8dcf9f765c47be7c082bf075af3ebe69c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initially TESTSERVER_COMPOSE_FILE could be manually specified.
Later this got removed by accident. Re-enable this feature.
Furthermore, check if a module has a platform-specific compose file. If
not, fall back to a default docker-compose.yml. This is useful to
include testserver.pri from other modules, where no platform-specific
requirements are present, ie the image from provisioning works on all
platforms.
Change-Id: Icb92552fd61196be332b2431ab0f8a43b9157fc8
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When checking whether a slot is connected to a signal, we need to
hold the signalSlotLock to be sure about the answer, or we can
get crashes when a connection gets removed while doing the check.
The check in activate() can handle some uncertainty as it's only
a shortcut to the longer path.
Fixes: QTBUG-74604
Change-Id: I3fc822455fbadc0223ef68632f5fb3df3ff3e86d
Reviewed-by: Aapo Keskimolo <aapo.keskimolo@qt.io>
[ChangeLog][QtCore][QVariant] Fixed a bug that caused isNull() to be
true after downcasting a QObject* payload using convert().
Fixes: QTBUG-73196
Change-Id: Ifda15952f873d7142c95609b69ac424bbf16b723
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In release mode, MSVC linker will enable it by default
while clang-cl won't. So enable it explicitly.
Change-Id: Iabfd8698d426290fee59662acf6c124b9f226c11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
