Take the rvalue insert() function and turn it into the emplace()
function. Reformulate rvalue-insert using emplace(). Lvalue insert()
is using a different code path, so leave that alone. This way, we
don't need to go overboard with testing.
[ChangeLog][QtCore][QVarLengthArray] Added emplace(), emplace_back().
Change-Id: I3e1400820ae0dd1fe87fd4b4c518f7f40be39f8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In order to fix QTBUG-95552 properly we have to add APIs to
QGraphicsSceneWheelEvent that informs QGraphicsProxyWidget about
whether the event is a high-precision event where Qt grabs the
wheel.
If it is, then the wheel grabber will be the QGraphicsView's viewport,
and any wheel event sent to any widget will be grabbed by it. This
results in infinite recoursion, partly fixed in change
I78400ceae8da7a4e22a988c06ed58f99f1a979f4.
The proper fix is to re-grab the wheel by the embedded widget
if it (or any of its children) accepts the ScrollBegin event (and if
not, return the grab to the QGraphicsView).
This fixes the scenarios that failed in the test case, so now scrolling
through nested widgets and scrolling in nested widgets works as the
user would expect.
Fixes: QTBUG-95552
Pick-to: 6.2
Change-Id: I3e1f31cbff999c70f8c63c034f77cd2ae567d7e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For high-precision wheel scrolling sequences, the widget that gets
the first (typically ScrollBegin) event grabs the wheel. Qt directs
all future wheel events within the same sequence (i.e. until ScrollEnd)
to that widget.
QGraphicsView passes wheel events through to the item under the mouse,
and QGraphicsProxyWidget implements wheelEvent to forward a synthesized
QWheelEvent to the embedded widget. Since QGraphicsView's viewport has
already grabbed the wheel, any forwarded event would end up back in
QGraphicsView, resulting in infinite recursion (if the assert doesn't
fail first in debug builds).
The correct fix requires that QGraphicsProxyWidget knows that this is
a high-precision wheel event, allowing it to adjust the wheel grabber
temporarily to the embedded widget. However, QGraphicsSceneWheelEvent
doesn't provide this information.
To fix the infinite recursion, mark the generated event as synthesized
by Qt (but still send it spontaneously to enable propagarion within
the proxy widget hierarchy). In QApplication's notification routine,
interpret such events then to override the wheel grabber.
Add a test case for the various scenarios. This 6.1 compatible fix
does not pass all situations. A follow up commit that introduces the
missing APIs to QGraphicsSceneWheelEvent then fixes those as well.
Task-number: QTBUG-95552
Pick-to: 6.1 6.2
Change-Id: I78400ceae8da7a4e22a988c06ed58f99f1a979f4
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Changing the screen orientation will cause the menu position to be
displayed incorrectly. When the screen is rotated, the geometry of
the application changes. We can refer to the handling of the menu
on Android or IOS. Close the popup window when the screen
orientation changes.
Fixes: QTBUG-95607
Pick-to: 6.2
Change-Id: I55e1cd6a8b89e375c6714a9163dfb1902d52f101
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Unlike simplified(), it just moves the end-points, without needing to
modify contents, so it makes sense (as for QStringView and
QLatin1String) to provide it. Moved QByteArray's trimmed() tests to
tst_QByteArrayApiSymmetry so that QBAV can now share them.
[ChangeLog][QtCore][QByteArrayView] Added trimmed().
Change-Id: Ifd7a752adb5f3d3e2ad0aa8220efa7e7d2d39baa
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QFont should be constructed with a list of font families.
Pick-to: 6.2
Change-Id: I61141b25d3f6e25f4fea141acbfa8e164d7af58f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Return ASCII sequences that start with xn-- but fail Punycode
decoding as is when converting URLs to Unicode. This is consistent
with handling of sequences that do decode successfully but fail other
validity checks.
This fixes one test in tst_qurlinternal.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I63d7197f25102c96f5dc21d9fecec5e015c531cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test string "xn--l0902716a" encodes 2**32. Currently
the IDNA code returns an empty string when encoding this
to Unicode instead of expected original string.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I5ce7bcc744c9d5426f66b8a7d0ae76c7c92f552b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use a lambda to simplify testcases for bad IDNs.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Ia4f3a5dbc73c74968628d89bd64d7aa6692b1c46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When formatting numbers, if the fill character used to left-pad to
field widths is '0', the code delegates that padding to the
QLocaleData's ZeroPadded formatting option. Since we want the zeros
before any minus sign, and don't want to subsequently add more zeros
before it, check that this has worked as expected when calling
replaceArgEscapes(), to confirm that it doesn't need to worry about
that.
Add some tests that verify the expected behavior.
In the process, tidy up the code doing this. Rename a local variable
to match our coding style, split a long line.
Pick-to: 6.2
Change-Id: I7cc430c5bceb006cf4e226bca33da16bd2bb1937
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The Qt style sheet reference claimed that Length properties can be
specified in 'em' or 'ex' units, but that was never implemented.
Add the missing implementation. Since the sizes depend on the size of
the font of the current element, we cannot convert the units in the CSS
parser, but have to do so in the QRenderRule constructor, where we can
make a decision about which font to use if the style sheet itself doesn't
specify a font. Fall back to the widget font if possible; otherwise it
will be the application default font.
The implementation translates em into QFontMetrics.height, identical to
what is already done in the QCssParser. This is in line with the CSS
specification, but contradicts our previous documentation which stated
that 'em' means "width of M". Fix the documentation.
Fixes: QTBUG-8096
Pick-to: 6.2
Change-Id: I145e2504ae3b19101a0d0dd63653466b6c2cec1d
Done-with: Cristian Maureira-Fredes <Cristian.Maureira-Fredes@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The separation between <system-out> and <system-err> is sufficient, and
we can't expect consumers to interpret our custom comment format.
The type of the text node has been renamed to more accurately identify
its purpose.
Pick-to: 6.2
Change-Id: I63c8ff17529fc087e1b695698350a6711eb5e68d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's used to handle qCritical() messages, and corresponds to QtMsgType's
QtCriticalMsg, so change its name to reflect what it really is.
In the process, reclassify the -maxwarnings overflow message as a warning,
rather than a critical message.
Pick-to: 6.2
Change-Id: I87626117a547ae4498d5dc352b93bd6db8bfb332
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original Ant JUnit reporter only writes <system-err> and <system-out>
to the <testsuite>, but more modern reporters such as Maven Surefire
scopes output to each individual <testcase>.
This is also handled by both the Jenkins JUnit and xUnit plugins, e.g.:
https://github.com/jenkinsci/junit-plugin/commit/145eb5c98
Pick-to: 6.2
Change-Id: I20c87276004a4e0910fc18e05e6ffa0f5e5a7b7c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The -silent option to tests is only supported with the plain text
logger, so we don't need to maintain expectation files for the
others.
Pick-to: 6.2
Change-Id: I0f42bfe90d82b7ce04f550c747d4a80e99621e74
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Test errors represents unanticipated problems, e.g., an unhandled
exception, or a problem with the implementation of the test.
Pick-to: 6.2
Change-Id: I87219e7ffdea56862278f005de44526ad97545f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qt6_enable_object_libraries_finalizer_mode is not needed anymore
now that static Qt builds require CMake 3.21 and thus CMake takes
care of placing object library object files at the beginning of
the link line.
Rename qt6_enable_import_plugins_finalizer_mode to a more generic
qt6_set_finalizer_mode that can enable or disable multiple
different modes.
For now the only available mode is "static_plugins" which handles
the behavior of the old function name.
The mode can be enabled by calling
qt6_set_finalizer_mode(${target} ENABLE MODES "static_plugins")
Note that the function is re-tagged as being in Technical Preview.
Ideally we would not need it at all. But we need to provide some
workaround for the limitations of linking Qt static plugins in CMake
on Linux-y platforms that use bfd ld or ld.gold.
The workaround does not work well with dependencies wrapped in
generator expressions which is why we can't confidently advertise it
as a proper solution.
Our hope is that this can be fixed in future upstream CMake versions
and the function can be removed.
See 6fcc272ac9 for details.
Adjust the tests due to the renamed and removed functions.
Amends 19e789bace
Amends cdbb390c4a
Amends a25027eecb
Amends 6fcc272ac9
Amends a3c430f390
Pick-to: 6.2
Fixes: QTBUG-95169
Task-number: QTBUG-95601
Task-number: QTBUG-95603
Change-Id: I51b85f776ec29fc04fed1a637eba7d1f60609e69
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add two tests for decoding IDNs when they encode values outside Unicode
(> 0x110000).
"xn--5p32g" decodes to "a" (all ASCII) before QTBUG-95577 got fixed.
"xn--400595c" decodes to the same value as "xn--097c" after the above
mentioned bug got fixed. This test is currently failing.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Icab55c41e0233b34d57e38232fa90ac42f35a50a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Iterate over Unicode codepoints instead of UTF-16 characters
when converting to/from Punycode as described in the specification.
Additionally reject strings with invalid surrogate pairs when
encoding to Punycode, reject strings with any encoded surrogates
when decoding.
Remove expected failure marking from the test for this issue
in tst_qurlinternal.
Fixes: QTBUG-95577
Pick-to: 6.2
Change-Id: I3dd68f95ada6d652e2fa5c0c3118dcfa0a5f4c4d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Helped quite a lot with OpenSSL 3 not accepting some old algorithms.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-95123
Change-Id: If4894fa86eba7b002465fa661d436ae6ea751989
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QMetaType does. QVariant should do the same.
Pick-to: 6.2
Change-Id: I3419276b78b3b5ce8bd144dee92685195797d568
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Daniel Nicoletti <daniel.nicoletti@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Unlike an acceptable effect in QTableView + QTreeView
setAdjustPolicy(QAbstractScrollArea::AdjustToContents)
unfortunately didn't work for QListViews (and QListWidget).
This patch corrects QListViews AdjustToContents
behavior.
[ChangeLog][QtWidgets][QListView] A more correct implementation
of QListView::viewportSizeHint has been made. That
implies that setting the sizeAdjustPolicy to AdjustToContent
on QListView and QListWidget will now cause the view to
size after the contents and avoid scrollbars.
Pick-to: 6.2
Task-number: QTBUG-58749
Change-Id: I1675115f2348e2fcf0b2c39b451ef337e10eb872
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previous fix hit too widely so some valid horizontal and vertical
lines were affected; the root problem being that such lines have an
empty control point rect (width or height is 0). Fix by caculating in
the pen width.
Pick-to: 6.2 6.1 5.15
Change-Id: I7a436e873f6d485028f6759d0e2c6456f07eebdc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The intention is to remove TYPE as a keyword completely before 6.2.0
release, but in case if that's not possible due to the large amount
of repositories and examples, just print a deprecation warning for
now and handle both TYPE and PLUGIN_TYPE.
Task-number: QTBUG-95170
Pick-to: 6.2
Change-Id: If0c18345483b9254b0fc21120229fcc2a2fbfbf5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We don't produce <failure> elements for them, so we shouldn't include
them in the total count of failures.
In the future we might produce <skipped> elements instead, but for now
remove the incorrect increment.
Pick-to: 6.2
Change-Id: Ia89a5cdaf79f6aa2f92be53180112c40ad6da2c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Hopefully we won't need it but let's have it still at least for
consistency
Change-Id: I72289e65e5e5613174ad4d98cf8d614f9caae8e6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The data itself is not indented, as consumers may read it as verbatim
data.
Pick-to: 6.2
Change-Id: Ia934616cea273feadc3a45d7c74726d4f804f0dc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use U+102F7 as an example. The current code is not able to handle conversion
of Unicode codepoints outside BMP correctly, so mark the test as expected
failure.
Task-number: QTBUG-95577
Pick-to: 6.2
Change-Id: Ifd50cf306bce4940f84cb412de148eac952e6c09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The solution in d3ed7dac8a was needlessly
complicated, and broke a valid use case.
The issue of no identifier being available to parse after the include
has been processed can instead be solved by moving the test for the
closing brace after the include processing.
Fixes: QTBUG-94790
Pick-to: 6.2 6.1 5.15
Change-Id: Ieec4b89e1d117637f11479e8bddc4060f93da43d
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
33d7f76f0e attempted to exercise more
of the blacklisting code, but in doing so didn't account for the
fact that the features it added didn't actually work.
Adding a global blacklisting of * will result in blacklisting
all tests, regardless of any inverse conditions "!*" later on,
such as for the 'pass' test. This would have been evident by
looking at the expectation files, which still showed the test
as a BPASS.
The broken feature should be fixed, but in the meantime let's
clean up the test so it doesn't misrepresent reality.
At the same time we also remove the messages() tests, which was
copied straight out of tst_silent, but doesn't serve any purpose
for the blacklist selftest.
Pick-to: 6.2
Change-Id: I20e4693300aad5e9ff5f17ad22e3dfcb5c49fd0e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The Apache Ant and Surefire Maven specs document a <skipped> element that
can be used to signify skipped test, with a corresponding total skipped
test attribute on the <testsuite>.
The element includes an optional message attribute, documented in the
Surefire spec, and in the Ant source code, but not yet documented in
the reverse-engineered Ant spec:
https://github.com/windyroad/JUnit-Schema/pull/11
Pick-to: 6.2
Task-number: QTBUG-95424
Change-Id: Ib6417a41b9c328836f4017e6ebf7f7e9cd91288d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The errors attribute on the <testsuite> element represents the number of
<error> elements, but we do not produce any at the moment.
Pick-to: 6.2
Task-number: QTBUG-95424
Change-Id: I7196d622a9a6bbb7e79ed2c2886984d539abb1da
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The JUnit test framework did not initially have any XML reporting
facilities built in. Instead, the XML report was generated by the
Apache Ant JUnit task:
https://github.com/apache/ant/search?q=filename%3AXMLJUnitResultFormatter.java
Many users interacted with these reports via the Jenkins JUnit plugin,
which provided graphical visualization of the test results:
https://plugins.jenkins.io/junit/
Due to the lack of an official XML schema for the Apache Ant JUnit
report there was some confusion about what the actual format was.
People started documenting the de-facto format, both as produced
by Ant, and as consumed by Jenkins:
https://github.com/windyroad/JUnit-Schema/blob/master/JUnit.xsdhttps://github.com/junit-team/junit5/search?q=filename%3Ajenkins-junit.xsd
The XML produced by the Qt Test JUnit reporter was far from these
schemas, causing issues when importing results into tools such
as Jenkins, Allure2, or Test Center.
The following changes have been made to improve conformance:
- The 'timestamp' attribute on <testsuite> is is now in ISO
8601 local time, without any time zone specified
- The 'hostname' attribute on <testsuite> is now included
- The 'classname' attribute on <testcase> is now included
- The non-standard 'result' attribute on <testcase> has
been removed
- The non-standard 'result' attribute on <failure> has
been renamed to 'type'
- The <system-out> element on <testsuite> is always included,
even when empty
- The non-standard 'tag' attribute on <failure> has been
removed. Data-driven tests are now represented as individual
<testcase> elements, e.g.:
<testcase name="someTest(someData X)" ...>
<testcase name="someTest(someData Y)" ...>
<testcase name="someTest(someData Z)" ...>
The resulting XML validates against both the de-facto Apache Ant
'JUnit 4' schema and the Jenkins JUnit plugin schema.
Task-number: QTBUG-95424
Change-Id: I6fc9abedbfb319f2545b99b37d059b18c16776ff
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use the right name for the attribute (AI_Message),
rather than fixing it up in QTestJUnitStreamer.
- Don't pretend that we're adding line and file information,
only to discard it in QTestJUnitStreamer.
- Don't pretend to add benchmark information,
only to discard it in QTestJUnitStreamer.
Pick-to: 6.2
Change-Id: Ib6eadc12300157216fe9c6e8bcfebd7eb8a3ea68
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Oliver Wolff reports that this test no longer hangs on Windows; and
the other plafroms for which it was skipped are no longer supported,
so remove the #if-ery that skips this test for platfroms on which
uncompressing corrupt data used to hang.
Change-Id: I94a3fd4b83338fe6e3a97ab055fe05e2f15b6b45
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Move out and share the test data from the QString::number_double() test
and re-use it for this one.
Task-number: QTBUG-88484
Change-Id: I6502d1d360657f6077e5c46636f537ddfdde3a83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was producing a warning about the invalid test, for which
replace_regexp() had anticipated that warning; do the same in
remove_regexp(). The two tests shared a date() method, but the remove
test was a no-op on the tests with non-empty replacement text; move
the column set-up and data rows with empty replacement to remove's
data() function, from replace's, and reverse the direction of calling
each other between data() functions, so each test gets the cases that
are relevant to it and no spurious PASSes happen for no-op tests. In
the process, give moved test-cases informative names; relocate the
(entirely re-written) remove data function to beside its test; and
eliminate a pointless local variable from both tests (it used to be
needed when testing both QRegExp and QRegularExpression).
Pick-to: 6.2
Change-Id: I93dcfc444f984edf5c029f99306aff6bc95d554a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code to work around setlocale() mis-describing en_US as C ensured
that we didn't accept the C test-cases when the locale was really
en_US; but neglected to accept the en_US test-cases when the locale
really was en_US but was misdescribed as C. This lead to no tests
being run when the locale was en_US.
Tweak the logic of the test filtering to compare the wanted locale
against the system locale both when C is wanted and when it isn't.
Make the skip-messages a little more informative.
Pick-to: 6.2 6.1
Change-Id: I4e072e12819144b2941b87a5f486534047d9a579
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To retain backwards compatibility with some QNetworkReply usage,
namely connecting solely to finished-signal and allocating a buffer to
read into, but without storing the entire decompressed file in memory
until read, we may decompress the file twice.
With this patch users can now avoid this double decompression if the
amount of buffered data stays below 10 MiB. This means any file smaller
than 10 MiB will never need to be decompressed twice to know the size of
it. On top of that, if the data is handled as it arrives (e.g. in
readyRead) and the buffer is kept below 10 MiB it won't need to
decompress twice either.
This is active as long as "countDecompressed" is true, though it
currently always is in QNetworkAccessManger, with a future goal to make
it possible to control with public API. Since it requires the user to
potentially adapt their usage of QNetworkReply.
In this patch we also stop tracking the amount of unhandled uncompressed
bytes (uncompressedBytes) in favor of tracking the total amount of bytes
which has been read() by the user of QDecompressHelper (totalBytesRead),
since we can more intuitively work out the total amount of unread bytes
using this value.
Change-Id: Ie3d8d6e39a18343fcf9b610f45c7fe7e4cd4e474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We try our best to pass on the file location of a failure, including for
fatal errors, but the reporting or logging machinery should not assume
there is one.
By passing on nullptr for the file location we allow the logging backends
to decide how to handle the situation, e.g. by not emitting extra fields
for failure location.
This effectively reverts c25687fa0b,
in favor of relying on the backends to cope with null filename,
which they already did.
As qFatal uses QMessageLogger, which by default disables file/line
information in release builds, we need to explicitly enable this in
our self-tests, to get uniform test results. Similarly, we disable
file/line info from testlib itself, as reporting Qt internal file
and line information for user diagnostics is less useful. The odd
one out there is qtestdata.cpp, which still ends up in test output
due to using QTEST_ASSERT instead of qFatal for its diagnostics.
Cleaning up that, and unifying how we report testlib issues to the
user, is left for another day.
Pick-to: 6.2
Change-Id: Ib9451b8eed86fe3ade4a4dcaf0037e1a3450321c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows up on commit 98666c8afc,
which did the same for QString. If someone wants to get formatting
suitable to an unsigned value, they can cast the value to that
unsigned type and the correct overload shall pick it up.
[ChangeLog][Important Behavior Changes] QByteArray's formatting of
negative whole numbers to bases other than ten now, like QString's
(since Qt 6.0), formats the absolute value and prepends a minus sign.
Task-number: QTBUG-53706
Pick-to: 6.2
Change-Id: I91fee23d25ac0d5d5bcfcbeccbac1386627c004a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One is a bad application or library in this case, but nonetheless
we should handle this more gracefully then just crashing due to
the QRhi already having been destroyed. Mainly because in Qt 5 one
could get away with the same: releasing OpenGL objects underneath,
for example, a QSGPlainTexture with no (or wrong) GL context did
not generate any user visible fatal errors. So we should not crash
in Qt 6 either with these code bases.
In debug builds or when QT_RHI_LEAK_CHECK is set, one will get the
unreleased resources warning printed in Qt 6, which is a step
forward compared to Qt 5. So there is still some indication that
something is badly designed, even if the application survives.
Task-number: QTBUG-95394
Pick-to: 6.2
Change-Id: I944f4f425ff126e7363a82aff926b280ccf1dfc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This signal is emitted by the QIODevice itself, so we don't have to
forward it from the internal socket.
Pick-to: 6.1 6.2
Change-Id: I85745f36d7a27d92f339a9184de3b6e5d46f6f34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Remove the QString/QStringView/QLatin1String/const char* overloads
from the API, but not the ABI.
As a drive-by, replace a use of QStringView::left() by truncate(), as
suggested by a comment.
[ChangeLog][QtCore][QUuid] The from-string constructor and the
fromString() function now take QAnyStringView (was: overload set with
a subset of QString, QByteArray, const char*, QLatin1String,
QStringView each).
Change-Id: If7fa26cfbef9280480c78b669d9f5f14118995ed
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Formatting using scientific notation with extra precision wasn't tested
Change-Id: I7a89a0f3d6468515604e43e52fc366dedf3c39ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For historical reasons a few of the subtests are skipped when
running with anything but the plain text logger to stdout.
To ensure we have as broad test coverage as possible for the
expected output of the various loggers we run these tests in
stdout-mode.
Pick-to: 6.2
Change-Id: I856905d1543afe89710533657a55bd599c0305fd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The JUnit reporter was initially named xunit, but the naming was inaccurate
and the reporter was renamed in 27db9e458c.
The corresponding test has now been renamed as well, and as an added bonus
we only run it for that reporter.
Pick-to: 6.2
Change-Id: I59cb7d949514cdf46a0199a53a7a3e39f833207c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: If86ef3d8611a678798b1bcc60a1a4f5598fd2179
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch fixed two bugs in indexOf/lastIndexOf:
1. The lastIndexOf(char, qsizetype) overload was crashing with an empty
QByteArray. It was unconditionally calling lastIndexOfCharHelper()
which assumes that this QBA is not empty. An explicit check for
the empty case is added.
2. The indexOf(QByteArray, qsizetype) overload was behaving incorrectly
while searching for an empty QByteArray. In this case it
unconditionally returned its second parameter (from). However, from
can be negative, or even exceed the size of this QByteArray. This
patch handles this cases properly.
As a drive-by: this patch adjusts the QByteArray::indexOf(char, qsizetype)
and QByteArray::lastIndexOf(char, qsizetype) overloads to match with the
QByteArrayView implementation. This is done to have similar code paths
in both cases and avoid tricky bugs in future.
Ideally we had to adjust the QByteArrayView implementation, but it's
fully inline, so can't be changed without breaking BC.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Iaef2fdc5b99cce6aa342cca2d17544a1ad7ca677
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are few slots whose lambdas are empty; most will at least
capture [this]. But there are a few in Qt examples that do, e.g. []{
qApp->quit(); }. Logging is also an example. So go the extra mile and
optimize for empty functors by inheriting from them as opposed to
storing them in a member variable.
Change-Id: I3904f10db5ebe904ba889d29c08569edd804df3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QString itself can be compiled without QRegularExpression, but
the tests do not check if they are supported or not.
This patch fixes the issue by introducing the proper #ifdef guards.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I797691f78a34d4f78a86af99c78bf06e26e846d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In commit 9bad096c09 I gave
qFuzzyIsNull(qfloat16) a more forgiving threshold, consistent with
qFloatCompare(qfloat16, qfloat16)'s fractional threshold. The selftest
failed to catch two of the tests failing, so fix one of them to use
different values, and remove one.
Updated test expection for txt and deleted for other formats, as
they're skipped (in tst_selftests.cpp) for this test. Refined the
generator script to know about this test only being tested for txt.
Pick-to: 6.2
Change-Id: I109547cf92178bb9f5ff0b06e0b3bb40c881b41b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
C++20 deprecated compound volatile statements such as pre- and
post-increments, to stress that they're not atomic. So instead of
volatile i;
~~~~;
++i;
you're now supposed to write
volatile i;
~~~~;
int j = i; // volatile load
++j;
i = j; // volatile store
which matches more closely what hardware does.
Instead of fixing every use of volatile pre- or post-increment in this
fashion individually, and realising that probably a few more Qt
modules will have the same kind of code patterns in them, write
QtPrivate functions to do the job centrally.
Change-Id: I838097bd484ef2118c071726963f103c080d2ba5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before this change, next() was the only way to advance the iterator,
whether the caller was ultimately interested in just the filePath()
(good) or not (bad luck, had to call .fileInfo()).
Add a new function, nextFileInfo(), with returns fileInfo() instead.
Incidentally, the returned object has already been constructed as part
of advance()ing the iterator, so the new function is faster than
next() even if the result is ignored, because we're not calculating a
QString result the caller may not be interested in.
Use the new function around the code.
Fix a couple of cases of next(); fileInfo().filePath() (just use
next()'s return value) as a drive-by.
[ChangeLog][QtCore][QDirIterator] Added nextFileInfo(), which is like
next(), but returns fileInfo() instead of filePath().
Change-Id: I601220575961169b44139fc55b9eae6c3197afb4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The number(double) testing done in tst_qstring was a bit lacking,
so other tests (like tst_uic) had to be run to properly test changes.
Task-number: QTBUG-88484
Change-Id: I2fc6cba27788ab4fab6d625257f35868e2b684e3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We missed the chance of deprecating them in 5.15, so
they'll just add to the pain of porting to 6.0. We
should not keep them around forever, though; QMap isn't
random access and so its iterators should only have
bidirectional APIs.
Pick-to: 6.2
Fixes: QTBUG-95334
Change-Id: I3577f7d25e8ab793722d2f220fd27bc85c622b0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QHash::squeeze() was unconditionally calling reserve(0), which is
always allocating memory (even for 0 size).
This was leading to a confusing situation when calling squeeze() on
a default-constructed container with 0 capacity() actually allocated
memory. This is very misleading, as squeeze() is supposed to free
unneeded memory, not to allocate more.
This patch adds a check for non-zero capacity. As a result, nothing
is done for default-constructed container.
Note that this patch also affects the QSet::squeeze() behavior, because
QSet uses QHash as its underlying data type.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib1c3c8b7b3de6ddeefea0e70b1ec71803e8fd3b3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
When inserting items into the result store, a ResultItem is created,
which stores a pointer to the results list and their size. If the size
of the ResultItem is set to 0, it means that a single result is stored.
In case of trying to report results via an empty list, the size is 0, so
result store treats it as a single result.
Added checks before storing the results to make sure that the result
list isn't empty. Note that empty lists are allowed in some cases for
the filter mode, because ResultStoreBase::addResults() knows how to
handle those cases correctly.
Task-number: QTBUG-80957
Pick-to: 5.15 6.1 6.2
Change-Id: I399af4c3eef6adf82fea5df031fe9a9075006b1f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit c19695ab95.
Just because QSet has limited API doesn't mean we can't provide this
in an efficient way for std::unordered_set :P
Added tests.
Pick-to: 6.2
Change-Id: I4f8f0e60c810acdc666cf34f929845227ed87f3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This introduces a new attribute that allows behavior to keep
the TCP connection(s) to a HTTP1/HTTP2 host longer or shorter
than the default of 120 seconds.
Note that the server might still close the connection earlier.
Fixes: QTBUG-20726
Fixes: QTBUG-91440
Change-Id: I7da64230a78c642c12c0ddbe6b678cf17c3aafde
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In two cases, it was as easy as replacing an unnamed enum's values
with constexpr variables. In the case of QSimplex, I opted for
qToUnderlying(), as the enum made sense on its own.
Change-Id: Ifcf5be14bd2f35e50adabdbd7ecdb2e83f6bf5b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed container.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Icc1f1342738603c9bed065b2a36c72ea60b48962
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This mechanism was neither properly designed nor correctly tested
initially on Windows.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now implements delayed closing, which is consistent with
the behavior on Unix.
Change-Id: Ic3bc427e68eea7f18201f6129df19fbc87d68101
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In the case where we have pending data to write, calling flush() here
may cause the device to close immediately, if the pipe writer already
got a result of the last operation from the thread pool. In this
scenario, the device does not enter the 'Closing' state, which leads
the following code to unexpectedly fail on Windows
socket.write(...);
socket.disconnectFromServer();
QVERIFY(socket.waitForDisconnected());
Removing the call to flush() makes the behavior consistent with the
implementation on Unix.
Change-Id: Ic31fbc999be979c1e5befa8f132d9fb367f472ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
According to the documentation, calling abort() should immediately
reset the socket to its initial state. This includes:
- closing the file descriptor;
- closing the QLocalSocket as an I/O device;
- canceling a pending outgoing connection, if it exist;
- reseting 'serverName' string.
So, adding a call to close() resets the state entirely.
Pick-to: 6.1 6.2
Change-Id: I9c604b5187c6300b437d7aa4c2d06db03edacf21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The plan for QObject::connect() (perfect) forwarders, such as
QWidget::addAction(), was to just use a variant of the Detection Idiom
to see whether QObject::connect() with the arguments as given would
compile and SFINAE out the forwarder otherwise.
It turns out that the "functor" overload of QObject::connect(), in
particular, is severly underconstrained and accepts e.g. QKeySequence
as a function object, only erroring out via a static_assert() in the
body of the function, and thus at instantiation time and not, as
needed, at overload resolution time.
At the same time, we don't really want QObject::connect() to SFINAE
out on argument mismatches between signal and slot, because the
resulting error messages would be ... unkind to users of the API. We
would like to keep the static_assert()s for easier error reporting.
Reconciling these two contradicting requirements has so far eluded
this author, so for now, to unblock progress, we explicitly black-
and, in one case, white-list possible arguments. Because QKeySequence,
in particular, is implicitly constructible from int(!), and therefore
any enum type(!), incl. Qt::ConnectionType, we need to do way too much
coding in the addAction() constraints. Hopefully, we'll be able to fix
the issue at the root cause, in QObject, before Qt 6.3 is out, but
until then, this is an ok-ish stop-gap measure.
Add thorough overload set checks (positive ones only, for now) to
tst_qwidget and tst_qmenu.
Change-Id: Ia05233df818bc82ecc924fc44c1b349af41cbbf1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
All the getters of QFutureWatcher are consistent with the getters of the
corresponding QFuture, except for the isFinished() method, which returns
'true' only after the finished() signal is delivered. This behavior
might be unintuitive for the users. In particular, isFinished() returns
'false', even if it's called immediately after waitForFinished().
[ChangeLog][QtCore][QFutureWatcher][Important Behavior Changes] The
QFutureWatcher::isFinished() method now indicates if the related
QFuture is finished, instead of indicating if the finished() signal was
delivered. This makes it consistent with the future that is being
watched.
Fixes: QTBUG-91048
Pick-to: 6.1 6.2
Change-Id: I6ae9b882b23e06198a82c95b026491bd480b3bf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QAbstractButton::setChecked is not virtual, so QToolButton cannot
override to synchronize the default action's checked state. This resulted
in button and default action not being in sync when the checked state
of the button was changed programmatically, while changing the checked
state on the action kept the button in sync.
Connect to the button's own toggled signal instead to keep the state of
the default action in sync. Make it a unique connection to allow multiple
calls to setDefaultAction, which are used by QToolButton to keep the
button updated if properties of the default action change.
Add a test that confirms that button and action are synchronized both
ways, and that we only get single signal emissions when changing either
programmatically.
Fixes: QTBUG-95255
Pick-to: 6.2 6.1
Change-Id: I0e027faf1da763ef1878e46e85bfa70073c8bf82
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ie57b5d13fad9a846c29c87be4985c87e69bba305
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, some other tests are added to extend code coverage.
As a drive-by:
* fix int -> qsizetype in the test data
* fix int -> enum in the test data
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I159473b7f5dcbea1bdaf2966979e066296351208
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
CMake 3.21.0 + Ninja now pass absolute source file paths to the
compiler which causes __FILE__ to be absolute and qFindTestData
to ignore any QT_TESTCASE_BUILDDIR value.
This causes the test to fail, because it won't find test data in the
custom specified location.
Disable the test for now.
Amends 70464b355e
Pick-to: 6.2
Task-number: QTBUG-95268
Task-number: QTBUG-95018
Change-Id: If99035e897ac1d5f153d4e19c94e4355f88970af
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The MinGW resource compiler fails to handle compile definitions
with multiple values.
When the resource file is compiled as part of the main target rather
than a separate object library, the resource generation rule will
inherit all the compile definitions from the main target.
For the case of tst_selftests this causes errors like
gcc: error: badxml\: No such file or directory
gcc: error: benchlibcallgrind\: No such file or directory
gcc: error: benchlibcounting\: No such file or directory
gcc: error: benchlibeventcounter\: No such file or directory
gcc: error: benchliboptions\: No such file or directory
Limit the compile definition to the C++ language only, so the multiple
values are not passed to the resource compiler.
Pick-to: 6.2
Change-Id: Ie53666839272556323b50d79c090f0dc71745d11
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
While QFileSelector is documented to work on files, select accepts
arbitrary URLs. Moreover, the QML engine can end up intercepting
arbitrary (user provided) URLs, including to directories.
Prior to this change, passing "file:///" or "/" to the function would
break: We would temporarily get a "//" path, which is invalid, and thus
we would return an invalid in the end.
Prevent this by only appending a slash to the path when it doesn't have
one.
Fixes: QTBUG-85410
Pick-to: 6.2
Change-Id: I1d2807a9d225df611c3a5e871e3c1d90a6a25953
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QtConcurrent reduce functions were requiring to explicitly pass the
the result type when passing functors as reductor. This was because of
inability to deduce the result type from the functors. The result type
of the QtConcurrent reduce functions should match with the type of the
fist argument of the operator() when a functor is passed. Reused the
ArgResolver type trait (already used for QFuture and QtConcurrent::run)
to find out the result type in that case.
Task-number: QTBUG-88448
Change-Id: Ief0eeee197df8cb9c30f3403d71978f36e4fb0f2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
These signals allow monitoring where in the HTTP1/HTTP2
flow a request is currently in.
Fixes: QTBUG-71698
Fixes: QTBUG-18766
Change-Id: Icc2fe435afc9f680fa7a76c32731e25fcdfeb4b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The server's socket may not have been created yet, so use the server's signal
instead.
Switch to QCOMPARE to get better output.
Delete the extra checking for schannel, we don't support Windows 8 anymore.
Pick-to: 6.2
Change-Id: Icd310c32939cb577c9f3438789f667aa0a3a4d85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the file already existed we simply removed the old one without
adjusting the size. So use the removeFile() function which takes care of
that.
Additionally, if the current size was non-null we previously increased
the size (presumably meant to be temporarily but wasn't) and called
expire() which would either:
1. not do anything and return currentCacheSize, if it was not greater
than the max size. This would mean that the size of the file would be
counted twice.
or,
2. discard currentCacheSize, measure the size of the items, and then
remove some items if the total size surpassed the max cache size
Neither of those branches need us to (temporarily) increase
currentCacheSize. It also doesn't attain the (presumed) goal of trying
to keep below the max cache size after having added the new item.
Fixes: QTBUG-95009
Pick-to: 6.2 6.1 5.15
Change-Id: I2b5b13ff473a7aa8169cf2aecfea783c97f2d09a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed containers.
Also add some missing tests for the existing methods
(mostly for QMultiHash) and correct some end()s to cend()s
in comparisons.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ic9e1b86ef67f6bca2751a65a8589b2f7e0ebb5ea
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test causes frequent failures in the CI. Couldn't reproduce on
actual arm64 hardware, so it's likely to be a QEMU bug. From the
available logs it seems that all the test cases are flaky (there's a
failure even after cleanupTestCase() is called), so disable all of them.
Fixes: QTBUG-94737
Pick-to: 6.1 6.2
Change-Id: I783ec2179ba779a2c8d93351a78e8472a4f7a907
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Declaration::lengthValue only supported 'px' sizes, but one can transform
any 'pt' value into 'px' by multiplying with 1.33.
Notes: this ignores display DPI, and instead follows the W3C definition
of 'pt' and 'px' as absolute lengths [1].
[1] https://www.w3.org/TR/css3-values/#absolute-lengths
1pt = 1/72th of 1 inch
1px = 1/96th of 1 inch
so the conversion is px = pt * (72/96).
Add unit test that verifies this using QPushButton's icon-sizes property,
also with changed font in preparation of adding support for 'em' and 'ex'
units in a follow up commit.
Task-number: QTBUG-8096
Pick-to: 6.2
Done-with: Cristian Maureira-Fredes <Cristian.Maureira-Fredes@qt.io>
Change-Id: I58782e7ad0e2ff9d89ed695f8a23b1e584cfed64
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This patch mostly introduces some test improvements to check the
calls of different methods on an empty default-constructed
container.
Apart from that some other tests are added to extend test
coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: If2bc96158462292bbdf8504942141af94568c729
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Add tests to verify parser behavior with locales that use code points
outside of Unicode BMP to represent dates. ccp is used for this because
Chakma language uses code points outside of BMP for both letters and
digits. QDateTimeParser currently is not able to handle this locale
correctly, so the tests are marked as expected failures.
Task-number: QTBUG-87111
Change-Id: I1cc6fe7304b47f19950ae0ad3179c4ffa946adb3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt has a hardcoded backlog value of 50,
this allows for applications to tune this
value. Modern kernels have the SYN cookie
feature that reduces pressure from an
flood attack, the backlog setting however
is then a queue for most likely real
completed (SYN/ACK) connections hence, it's
easy to get clients connections dropped
with this very small limit.
[ChangeLog][QtNetwork][QTcpServer] Added
QTcpServer::setListenBacklog() to be able
to have control over the listen backlog feature.
Change-Id: I1c78af6d99e012591e214b7e09fa85c485880d48
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The use of a freestanding function is not needed now that the name
doesn't alias the nativeInterface accessor function, and was just
adding complexity to the machinery.
People not familiar with the code will have an easier time following
the flow through the helper member function, and we no longer need
to declare our own export macros.
Pick-to: 6.2
Change-Id: I17530b7e89939cfc19ab8ffaa076b7129ae02dcf
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For SingleSelection, removing the selected item will select the nearest
item and, if autoScroll is enabled, ensures that the newly selected
item is visible in the viewport. This may result in scrolling.
For Multi- or ExtendedSelection, this should not happen, as having no
selection is perfectly fine in those modes.
However, QListView still tried to scroll to the current item in response
to the currentIndexChanged signal. Since the currentIndex is at this
point already hidden, the rectangle for it became invalid, and the
attempt to scroll resulted in a one-pixel up-movement of the viewport
(since the invalid rectangle has width == height == -1).
Fix this by not scrolling if the rect for the index is invalid. Note that
the index is still valid at this point, so we can't shortcut the call
stack earlier. Add test that exercises the different combinations of
ViewMode and SelectionMode, and demonstrates the one-pixel
movement without the fix.
Fixes: QTBUG-94788
Pick-to: 6.2 6.1 5.15
Change-Id: I1f36973eadb46e8c9b8b8068bc76ee09e9f490dd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib3c3f5bcb967cd1031cb24ffceaa77a146212ffd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
In QItemSelectionModel, items which are disabled or marked as not
selectable should not be considered as selected. But this was
not handled consistently.
The following methods considered only items which are enabled and
marked selectable: selectedIndexes(), rowIntersectsSelection(), and
columnIntersectsSelection(). The following methods considered only
items which are marked selectable, but did not check whether they
are enabled: selectedRows(), selectedColumns(), isRowSelected(),
isColumnSelected(), isSelected(). Finally there is hasSelection(),
which did not check for enabled nor for selectable.
This patch introduces consistent behavior. All methods check
both whether the items are enabled and whether they are selectable now.
[ChangeLog][QtCore][QItemSelectionModel][Important Behavior Changes]
All methods in QItemSelectionModel now consider only items which
are marked as enabled and selectable as part of the selection.
Fixes: QTBUG-93829
Pick-to: 6.2
Change-Id: I4725243ea6b0db4f289ce34ada22c7a9d3282713
Reviewed-by: David Faure <david.faure@kdab.com>
The maximum size for a hash result is 64 atm. Even if, and esp when,
we'll get to 128 and 256 bytes in the future, there's no reason to use
dynamic memory, because the sizes will always be statically known.
So use, essentially, a std::array<char, 64> to hold the result
internally. Add a bit of convenience API on top to limit impact on the
rest of the code and add a few static_asserts that ensure this is large
enough. Then give users access to the internal buffer by adding
QByteArrayView resultView() const noexcept. The documentation snippet
is taken from QString::data(), suitably adjusted.
Use resultView() in a few places instead of result().
[ChangeLog][QtCore][QCryptographicHash] Changed to use a
statically-sized buffer internally. Added resultView() to access it.
Change-Id: I96c35e55acacbe94529446d720c18325273ffd2f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It timed out the other day on the CI. Even the SHA-1 check took 137s
(with a 300s timeout). Skip the SHA-512 test on the CI, but keep it
for manual runs.
Pick-to: 6.1 6.2
Change-Id: I49792ac9bcab6512e1803f66cd986b2830e634c0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By switching out the static_assert for an enable_if we end up producing
a clearer error, at the call site:
/qt/qtbase/examples/gui/rasterwindow/main.cpp:69:9: error: no matching member
function for call to 'nativeInterface'
app.nativeInterface<QNativeInterface::QCocoaGLContext>();
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/qt/qtbase/src/gui/kernel/qguiapplication.h:176:5: note:
candidate template ignored: requirement
'NativeInterface<QNativeInterface::QCocoaGLContext>::isCompatibleWith<QGuiApplication>'
was not satisfied [with NativeInterface = QNativeInterface::QCocoaGLContext, TypeInfo =
QNativeInterface::Private::NativeInterface<QNativeInterface::QCocoaGLContext>, BaseType =
QGuiApplication]
QT_DECLARE_NATIVE_INTERFACE_ACCESSOR(QGuiApplication)
^
By using SFINAE for the TypeInfo we can also ensure that it works for
types that are not native interfaces, such as if the user tries to
call nativeInterface<QString>().
Since we can no longer use decltype(*this) to resolve the base type
we need to change QT_DECLARE_NATIVE_INTERFACE_ACCESSOR to take the
type as an argument, as we do for other QT_DECLARE_FOO macros.
Pick-to: 6.2
Change-Id: Ie3f7e01ab7c3eb3dcc2ef730834f268bb9e81e0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QMetaType now implicitly knows how to convert any QFuture<T> to
QFuture<void> without needing to manually register a converter
function.
QtWebChannel will make use of this to transparently support QFuture<T>
return types.
[ChangeLog][QtCore][QMetaType] QMetaType now supports converting any
QFuture<T> to QFuture<void>.
Task-number: QTBUG-92903
Change-Id: Ied7e71be37c346cc3d2c274ffb0d91a6821ab4d4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I5b418265fc7cb3e56e44782be7704d642923a8e9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
In case of
QTranslator translator;
translator.load("somedir/file.qm");
and file.qm being a meta catalog file, the sub-catalogs in somedir
couldn't be located, unless "somedir" was set as second argument.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-95013
Change-Id: I06103244ce2ff9800c2c64cb0c17f9bc7ef0e8de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This makes it easier to further extend the test. The overhead this
causes is negligible.
Pick-to: 5.15 6.1 6.2
Change-Id: I42941879f55337268bb2914e122a5f573ab7e6f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Both readChannelFinished() and disconnected() signals should be emitted
after closing the pipe. Otherwise, these signals do not correspond to
the state of the socket and may even be resent, if a slot connected to
one of these signals processes events.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now emits both readChannelFinished() and disconnected() signals
after closing the pipe and emitting stateChanged(UnconnectedState),
which is consistent with the behavior on Unix.
Pick-to: 6.2
Change-Id: I1cc551b7897fdba3cec1fd6705f5396790818c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When saving to a QIODevice, QImage and QImageWriter will automatically
deduct the file format from the filename if it determines that the
device is a QFile. That did not work for a QSaveFile device. Fix by
using the common ancestor, QFileDevice, in the implementation.
Fixes: QTBUG-89022
Pick-to: 6.2
Change-Id: Ie01d80df4f29ca0d4ff30bf7e1b77605293c070e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This prevents us from first reserve()ing Prealloc elements, and then
possibly reserve()ing a larger number, which leaves the first bucket
list's memory unused.
Consequently, deprecate reserve().
Change-Id: Ifc0a5a021097f4589557e7b5e45d9d0892797ade
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They're now in QWidget itself. Remove them from the API, but not the
ABI.
The QToolBar case is straight-forward. QMenu is a bit more complicated:
Since QT_CONFIG(shortcut) builds changed the signature of an existing
function instead of adding/removing an overload, we have to deal with
two cases: In a QT_CONFIG(shortcut) build, these overloads that take a
trailing QKeySequence parameter have been deprecated and therefore
cannot be removed. In a !QT_CONFIG(shortcut) build, the same functions
are 1:1 copies of QWidget functions and can be removed (from the API).
[ChangeLog][QtWidgets][QMenu/QToolBar] The addAction() functions have
been moved down into QWidget.
Change-Id: I49997b3440c137a1d4e3858d1d27d34a191e1eed
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Outside tests, all in-tree callers of QObject::findChildren() pass no
name to match, and in my experience that is also true for the vast
majority of out-of-tree users.
Avoid the temporary QString creation in the caller and the repeated
QString::isNull() checks in the implementation by overloading
findChildren() without a name argument and checking for name.isNull()
only once, forking off into separate helper functions.
Adjust in-tree callers that used an explicit `QString()` argument in
order to pass options, which goes to show that `name` should never
have been the first argument of findChilden() in the first place, even
though I appreciate the symmetry with findChild() (the use-cases of
which, however, are radically different).
Change a `findChildren().size() == 0` call found while scanning for
findChildren() calls to `!findChild()` as a drive-by.
Modernize loops in the various qt_qFindChild{,ren}_helper() overloads
to match how the new code looks.
[ChangeLog][QtCore][QObject] Added findChildren() overload taking no
name (thus optimizing this common case).
Change-Id: Ifc56e5438023d079b40c67f11ae274a3e128ad5e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSettings encodes QVariants as @Type(data) strings. If that data contains
a null-byte, we write the string as UTF-8 encoded CFData. When reading it
back we look for a @ prefix, and then pass it as UTF-8 through stringToVariant.
The problem arises then the user writes raw QByteArrays with a @ prefix.
We can detect this situation by checking the result of stringToVariant,
and if it's just a simple conversion of the string into a QVariant, we
know that stringToVariant hit its fallback path due to not finding any
embedded variants.
If that's the case, we return the raw bytes as a QByteArray.
Pick-to: 6.2 6.1 5.15 5.12
Change-Id: I4ac5c35d0a6890ebea983b9aca0a3a36b0143de2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of raw pointers or QSharedPointer.
Raw pointers are, of course, a no-no in modern code. In particular,
when the result is then held in shared_ptr or QSharedPointer,
make_shared or QSharedPointer::create() should be used to reduce
number of memory allocations.
Since this is private API, we're free to use std::shared_ptr, which
does only half the atomic operations on copies, compared to
QSharedPointer, so is more efficient.
For either make_shared or QSharedPointer::create(), we need to work
around the private ctor, which we do by inheriting a member-function
local class from QColorTrcLut and make_shared'ing that. As a
member-function-local class, it has access to the otherwise private
parts of QColorTrcLut, including its default constructor. As a public
subclass, shared_ptr has no problem performing the derived-to-base
pointer adjustment in the return statement. This way, we can use
make_shared even though our target's class' ctor is private.
Change-Id: Icb11249b54cd5e544e692f6a0bf1f9dda1710454
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The ${QT_SOURCE_TREE}/src/network include paths of several tests are
apparently not needed anymore. Remove those.
tst_qfilesystementry and tst_qfreelist are the only tests that actually
need to reference files in qtbase's source tree. Simply use the paths
relative to the project file.
Task-number: QTBUG-88090
Change-Id: Ic6f341e001338c1b07dce6e58316245bc9560c5e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For generic interop with other parts of Qt, we need to be able to
extract the type-erased internal storage of QFuture<T>. In particular,
QtWebChannel needs this to transparently support QFuture<T> as a method
return type.
Task-number: QTBUG-92903
Change-Id: I763f054656b8810d58720262d364baf42c47eb37
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Enable the check, that has been disabled because of instability, which
makes the test-case useless. The reason for instability probably was
that it doesn't always start maxThreadCount number of threads: it could
be less if the workers reuse the thread pool's already created threads
(if possible) instead of creating new one each time. But we can at least
make sure, that we're not starting more threads than expected.
Task-number: QTBUG-94463
Pick-to: 5.15 6.1 6.2
Change-Id: I8e498c377d86c49758bde0114fe6f7e0432fe993
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
QTableView stored the current row/column selection start in an own
variable instead using currentSelectionStartIndex. This leads to an
inconsistent behavior when the selection is done with a click on the
header and then in a cell (and the other way round)
Fixes: QTBUG-92561
Change-Id: I4c8bda3a938de451b6eff2819141e86a6870fbef
Pick-to: 6.1 6.2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The decltype() of a const auto variable will be const T, for some
T. GCC warns that in the static_cast, said const is ignored.
Fix by not casting, but declaring a variable of fitting type. Add a
scope so the next reader doesn't have to go hunting for further uses
of 'readResult' or, now, 'expected'.
Change-Id: Iebc828a522810c6f2514fb3542d8c76c755ec7a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends c0b3c06a7d.
The QCompleter used by QFileDialog uses starts-with matching of
the path parts, for all parts of the path. It uses the EditRole of the
underlying model for the data to match.
The path parts used for a path on Windows are "C:", "Users", "etc...",
and then finally whatever input has been typed so far. If we try to
match that against a starts-with rule against "Local Disk (C:)", then it
will fail and the completer will never have anything to show.
So, for the EditRole, return just the volume drive letter as we did before
c0b3c06a7d, not the volume name. Neither
can be edited anyway. This happens to then match the native file dialog
behavior, which doesn't complete "L" to "Local Disk (C:)" if the Computer
contents (ie. volumes) are shown.
Augment the QCompleter test case to cover that scenario (it already has
everything set up for this particular combination, even though we are
actually testing QFileSystemModel returning the correct data).
Fixes: QTBUG-94799
Task-number: QTBUG-78043
Pick-to: 5.15 6.2 6.1
Change-Id: I14844d91601e9b16dc07cff2ca48713acb7cdd09
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The method was never tested, but it failed to compile after
QMultiHash was introduced as a separate class in 6.0.
This patch fixes it and adds some unit-tests to cover the case.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I5dd989d4775efc6a9bb13c5ed1d892e499d95dc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The base implementation discards the data by reading into a dummy
buffer, which is slower than necessary.
Change-Id: Iabf0c4a25746af6cac5b61d7bda66d89501c808c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Do not detach when find(key, value) is called on an empty QMultiHash.
As a drive-by: fix return value for QMultiHash::remove() in case of
empty QMultiHash.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I1e32f359e7ee9ce8403dae79d02e0b88a20ec4a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There's a chance that this would be used in some macro, so why not test
that this thing works in general (especially since it actually works)
Change-Id: Ib9d91fbd17cf16675ae89a99f010dacc5d30967a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use the ctor instead of appending 1'000'000 chars.
Introduce C++14 digit separators as a drive-by.
Change-Id: Icdbef3173f42d12ae2226b8556f9b1519e594adc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We call evaluateRecursive_inline in setBinding, which in turns runs the
noSelfDependecies check. However, creating a binding resuting in a
binding loop must not crash, but instead result in the binding entering
an error state. To prevent a crash caused by the assert in debug builds
of Qt, we replace the assert with a warning for now.
A better approach in the future would be to ensure that we only run the
check in cases where we are sure that a self-dependency is really a
fatal error.
Pick-to: 6.2
Change-Id: I58158864ed81fa907132a4e7d6667c9b529e7e64
Reviewed-by: Maximilian Goldstein <max.goldstein@qt.io>
After dc794f7622, side widgets only got
space if they were not fading out, but the logic was not correctly
accounting for side widgets that never fade, such as buttons added via
QLineEdit::addAction.
Fix this to give visible widgets space, unless they are fading out. That
was the intent of the original change. Rename the variable to make its
purpose clearer, and reset it at the end of the fade-out animation.
Add a much-needed test that relies on private APIs to verify that the
effective margins are calculated correctly.
Fixes: QTBUG-94824
Pick-to: 6.2 6.1 5.15
Change-Id: If2ee6be52be9e4f9be1e91f72f27681ce27def6d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In the unit tests, two times a validator was used without a parent,
which led to memory leaks. This patch changes this: The
validators are initialized with the widget they are meant for
as parent. This fixes the memory leaks.
Pick-to: 6.2
Change-Id: I480c0c5104cbe60159fad49df28cbb6240e7ce68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Incl. the static hash() function. Remove the QByteArray versions from
the API, but not the ABI.
Adapt some callers.
[ChangeLog][QtCore][QCryptographicHash] Replaced QByteArray with
QByteArrayView in addData() and static hash() functions.
Change-Id: Ia0e9bf726276305e05894d323d76a29e985f39eb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QIODevice::readLine() can also return partial lines, which was not
properly documented. Add an autotest for QLocalSocket to illustrate
and test this behavior.
Pick-to: 6.2
Change-Id: Ia2c1c438cc68d2672d34881e11fdf7837232f3b4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Need to decrement 'remaining' (check), but also increment data (meep).
Testing is a bit complicated, as most algorithms are just too slow to
fit into the 5min QTestLib timeout. Picked the fast ones and Sha512
(which completes here in < 17s, with threads), at least.
Amends e12577b563.
[ChangeLog][QtCore][QCryptographicHash] Fixed a bug where presenting
more than 4GiB in a single addData() call would calculate the wrong
result().
Pick-to: 6.1 6.2
Change-Id: Ic72916ebc33ba087d58225af6d8240e46e41f434
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If a child widget that is affected by the parent's style sheet is
polished (because it's been shown explicitly, for instance by a layout),
then it must be repolished when the parent's style sheet changes, even
if the parent itself has not been polished yet.
Since the style sheet is set on the parent widget, we must repolish the
parent (which will repolish the entire widget tree), not just the
individual children and grand children.
Fixes: QTBUG-76945
Task-number: QTBUG-39427
Task-number: QTBUG-18958
Change-Id: I7bca9ee1badc07202fa05dc97f440f4ca6c9517d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Due to mistake in data it was missed for testing.
Pick-to: 6.2
Change-Id: I4dcd6fd90fd501e4cc941c07efcf9439ba6acf30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
target_link_options are placed by CMake at the beginning of a linker
line. This gives us an opportunity to use the function to propagate
object libraries. This change adds one more check in the root
Config.cmake file. If CMP0099 policy is enabled, CMake enables
propagating of the linking options when linking two static libraries
using the PRIVATE linking visibility, so we can rely on the correct
linking order and expect object libraries to be propagated.
Note that on the platforms where cmake version is higher than 3.16
Qt uses CMP0099 NEW in functions like qt_add_executable. This means
that at the moment of creating an executable target the TARGET_POLICY
genex will also be NEW, so we do not take into the account the user
defined CMP0099.
If the CMP0099 policy is not available for a certain CMake version
we skip the TARGET_POLICY check and simply disable propagation of
the object libraries using target_link_options for both user and Qt
libraries. This is applicable for the CMake versions 3.16 and less.
Linking approaches have the following priorities(from higher to lower)
after this change:
- target_link_libraries - works if link order matters not or CMake
version greater equal 3.21.
- target_link_options - works if CMP0099 is set to NEW by user or
if the CMake version is greater than or equal to 3.17 and an
executable is created using Qt functions.
- object library finalizer - works if CMake version is greater equal
3.19 or qt6_finalize_target is called explicitly.
- target_sources - is used when all the other approaches could not
be used.
Amends a1fd4f51ad
Amends 3329212815
Pick-to: 6.2
Change-Id: I14f88caeb04e357191c840abeab89b03e210b796
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
With MSVC it tries to link with the function in the scope qt::tst_QDtls::*
where it is not found
Pick-to: 6.2
Change-Id: If83a9f69c7b3834248569f6bdf203f5442693080
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
To (set)decompressedSafetyCheckThreshold, as suggested on the API review.
Task-number: QTBUG-94407
Change-Id: Iffc52691022939ae46703de8a0416355487b716f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Says GCC:
In function ‘char* QTest::toString(QPair<T1, T2>&) [with T1 = QWidget*; T2 = QEvent::Type]’,
warning: ‘%s’ directive argument is null [-Wformat-overflow=]
Fix by re-using formatString(), once introduced for std::tuple.
As a side-effect, this gets rid of the funny double-quotes around the
output.
Change-Id: I2dd5f10fa2b3a392370bf487c1b7e98f3d190978
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... and C++20 std::counting_semaphore API compatibility.
[ChangeLog][QtCore][QSemaphore] tryAcquire() now optionally takes a
<chrono> duration as timeout, not just int milliseconds.
[ChangeLog][QtCore][QSemaphore] Added try_acquire{,_for,_until}() for
C++20 std::counting_semaphore compatibility.
Change-Id: I34b6b4bf57a54745d4b97349903d090c4995338a
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
GCC can't see through all the foreach code to determine whether the
loop will execute at least once, so don't play hardballs with the
compiler and initialize the variable.
Change-Id: I95756a99eda497a25aa277046df9895f558758c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... by making the test class a friend of the CUT, as we do elsewhere
for the same reason.
This allows to remove the duplicated enum and struct in favor of using
The Real Thing™, which means the test can no longer go out of sync
with the CUT anymore.
Change-Id: I87dc8bb4a5476ae4fc99e006c4690e96d2f530d2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
- QString/QStringView overloads were designed to be compatible for all
possible argument types, so check that it stays that way
- QString/QAnyStringView overloads have several known ambiguities that
we cannot and don't want to fix, because it would make
QAnyStringView less versatile, but at one should at least be able to
overload QString and weak-QAnyStringView.
Change-Id: I5e5ae3c96060c93bfe070f6c19213328dae9c5f9
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
For flush() it's not clear what they wanted to test.
isEncrypted() is tested indirectly in many of the other tests.
Change-Id: Id6dfecbb25b7bba8f1a99518fd9c9e06280aaa9f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It needs to be checked at runtime to know if the current backend
supports it
Pick-to: 6.2
Change-Id: I0998309149b109e2075a008b2b8d8115fa3688cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With MSVC the current way we mark it (potentially) unused ends up with a
warning:
warning C4551: function call missing argument list
We require c++17 core language support so let's use [[maybe_unused]]
instead.
Pick-to: 6.2
Change-Id: I125986b729cb7cd540901702a47365f0491e7887
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As per the best practice laid forth in RFC-8996.
TLS 1.2 was recommended from 2008 until TLS 1.3 was released in 2018.
[ChangeLog][QtNetwork][QSslSocket] TLS 1.0, 1.1 and DTLS 1.0 are now
deprecated, as recommended by RFC-8996.
Fixes: QTBUG-92880
Change-Id: I90cebcfb07cfce623af7ac9f2b66ce9d02586b54
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since we're no longer connected, much less encrypted.
Was done in schannel backend, but not in ST or OpenSSL
Pick-to: 6.2
Change-Id: Ia49387be0088f899a0c89091f7e468dba1c0eee6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With the recent change, 'system' headers gone: not in the test code anymore,
so, for example OPENSSL_VERSION_NUMBER is undefined, making the test
to select a wrong code-path - 'h2c', instead of encrypted h2.
Pick-to: 6.2
Pick-to: 6.1
Change-Id: I3b201e21fac56875c9045c7463e2ae69af4c6470
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add an option that automatically generates an export header for a Qt
module. The header contains only Q_DECL_EXPORT/Q_DECL_IMPORT related
content, so it's not a full replacement of 'global' header files.
Task-number: QTBUG-90492
Change-Id: I250d1201b11d4096b7e78e61cbf4565945fe6517
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Triggered by API review in Gerrit patch 355960.
Task-number: QTBUG-94407
Pick-to: 6.2
Change-Id: I7cafc1cc9d4b929040b53c6bf92c91d73c3b39f2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Match the checks in the constructor test that are similar.
Change-Id: Ifb62af09e31aac339f001f44bc30789330c85be6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This should reduce the amount of fall-out from DST complications.
Also document the assumptions of QDateTimeParser's two fromString()
methods (and fix the punctuation on the QDateTime parameter).
Adjusted some tests to match.
Since only QDateTime-returning methods will show the difference, and
it's at least somewhat odd to be using those on QDateEdit or
QTimeEdit, this should have little impact on API users.
[ChangeLog][QtCore][Behavior Change] QDateEdit and QTimeEdit now
operate in UTC, to avoid spurious complications arising from time-zone
transitions (e.g. DST) causing the implicit other half to combine with
the part being edited to make an invalid result. Returns from their
dateTime() and other methods returning QDateTime (max/min) shall thus
be in UTC where previously they were in local time. QDateTimeEdit
continues using local time. The default can be over-ridden by
setTimeSpec(), as ever.
Change-Id: I44fece004c12342fe536bbe3048217d236fd97b2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDTP's absoluteMax(), setDigit() and getDigit() simply treated
day-of-week as synonym for day-of-month.
Consequently, QDTE::stepBy() did the same.
This meant that wrapping happened at the month boundary, so would jump
within the week if it wrapped around, otherwise the up/down arrow
would "jam" at a particular day of the week when further steps would
leave the month. Instead, when wrapping, wrap round the week while
still moving the day-of-month to match, jumping back or forward a week
to stay within the month on hitting a month boundary; otherwise, stop
backwards stepping on hitting the locale-specific day of the week, or
forward stepping when the step would be to or past this first day.
Fixed various bugs found in the course of testing this.
[ChangeLog][QtWidgets][QDateTimeEdit] Corrected handling of weekdays.
Previously, changes to the week-day were simply changes to the day of
the month. Weekday fields are now handled as such: changes to them do
change the day of the month, but a change that would step past the end
(or start) of the month is adjusted to the relevant day of the nearest
week within the month. When wrapping is disabled, the locale-specific
first and last days of the week are the bounds. Formats which specify
day of week but not day of month will now preserve day of week when
changing month or year, selecting the nearest day of month that
matches.
Change-Id: I7868b000fea7a4bc17a1b5687c44bcd56d42ae90
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If we disregard the precision we may read a very large string that we
subsequently discard. Furthermore, people use this to read
non-null-terminated strings, which randomly crashes.
Pick-to: 5.15 6.1 6.2
Change-Id: Ifa255dbe71c82d3d4fb46adfef7a9dc74bd40cee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... even though the documentation states that the action takes
ownership of the widget.
Change-Id: Ie5520fbda295a5a2774ff8b82165070e9d49e310
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The linking logic of object libraries should be reusable outside of the
resource context. This introduces a
__qt_internal_propagate_object_library function that prepares all the
necessary genexes to link and propagate the object library to the
end-point executable.
Rename resource object finalizer API to make the naming more generic
to object libraries of any kind.
Amends 5fb99e3860
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: I69d0f34c0dadbd67232de91035aaa53af93d1fa1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Changing anything on a QWindow's QSurfaceFormat has zero and null
effects once the underlying native window has been created. Letting
QWidget update the format is wrong in this case, because we always
expect that the value returned from QWindow::format() reflects
reality.
(reality being the settings with which the underlying native resource
was created, which is typically frozen after QWindow::create(), not
the state of some QWidget attribute. There are certain exceptions to
this, such as when preparing to recreate the underlying native window,
in which case one will want to update all relevant fields of the
format based on the current values of the widget attributes, which is
exactly what QWidgetPrivate::create() implements, and that's good.)
Such a mismatch can have fatal consequences when OpenGL and friends
are involved, but this always depends heavily on the platform and
windowing system. For example, claiming that the alpha buffer size is
0 when the native window was created with 8, or vice versa, can break
OpenGL-related code (both in Qt itself and in applications), that
tries to create a QOpengGLContext configured based on what
QWindow::format() returns. If that format describes settings that are
incompatible with the actual underlying native window, we end up with
the classic Invalid pixel format, EGL_BAD_MATCH, and alike errors.
This is exactly what is happening when a QOpenGLWidget (or
QQuickWidget) is placed in a QDockWidget where one of the ancestors is
forced to native (winId() was called or WA_NativeWindow was set). When
undocking, various code paths in QWidget will try to update the opaque
flag of the widget, which in turn calls updateIsTranslucent. Now, if
this function unconditionally changes the alphaBufferSize in the
QWindow's QSurfaceFormat (even though this is completely futile to do,
it has no visible effect in practice), we get the problem described
above: rendering breaking down due to OpenGL contexts created with a
pixel format incompatible with the native window.
Prevent all this by not touching the format once the QWindow has a
QPlatformWindow. This is the right thing to do, regardless of the bug
in question: a window's (or context's or any other native resource
wrapping class's) format must describe the underlying native resource
and must never deviate, unless we are preparing to create a new native
resource underneath.
When it comes to the autotest, this changes the test added in
555661b625: the autotest logic is
inverted because what we should test for is that the QSurfaceFormat
stays untouched once the application makes a - futile - attribute
change on the widget.
Fixes: QTBUG-85714
Pick-to: 6.2 6.1
Change-Id: I7bf90711867e8a0fd474895625bf9530a7821fd5
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
When the element you want to erase is the last element AND the
next element (element 0), when rehashed, would be relocated to the last
element, this leads to the state below. Which is similar to a test in
tst_qhash for some seeds.
auto it = hash.begin + (hash.size - 1)
it = hash.erase(it)
it != hash.end
By forcing the iterator to increment if we were erasing the last element
we always end up with a pointer which is equal to hash.end
Befriend the tst_qhash class so we can set the seed to a known-bad one
Pick-to: 6.2 6.1
Change-Id: Ie0b175003a2acb175ef5e3ab5a984e010f65d986
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When calling `setStyleSheet` with property `qproperty-styleSheet`,
`QStyleSheetStyle::polish` will call`QStyleSheetStyle::setProperties`, and then`QStyleSheetStyle::setProperties` goes on to call `setProperty`.Because there is property `qproperty-styleSheet`, it will update stylesheet by calling QStyleSheetStyle::polish`.
This causes the recursive call to crash.
Fixes: QTBUG-94448
Pick-to: 5.15 6.2
Change-Id: I79c51192a939b0b62e5b1d0dcc90d38f79e28222
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Directly writing to the underlying property storage has the potential of
breaking all kinds of internal invariants. As we return QBindable in
the public interface, we should not grant callers access to the
internals of the object.
Pick-to: 6.2 6.1
Change-Id: I737ff293b9d921b7de861da5ae23356c17690b78
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This does not fix all data races that we have in the system yet.
One major issue is the virtual disconnectNotify(), that can be
called from any thread and thus is inherently problematic, as it
can collide with the object getting destroyed at the same time
in another thread.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-88248
Change-Id: I9d841eb363b7e4f0de1657aeb8f5340d0fd55190
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was suppressed unconditionally (albeit in different places and with
different levels of obviousness) almost everywhere, due to inability
to set the system locale in use by the implementation. Several
test-cases used ISO-8859-1 encoding on Q_OS_MAC, where the tests were
all suppressed anyway. A block of no_NO tests was #if 0'd out; and
should, in any case, have been nb_NO. Tests of any locale but en_US
were skipped on Q_OS_WIN because we can't set the locale (but
including the tests of en_US tacitly assumed that's the system
locale). If setlocale() failed, for ICU or DARWIN, the test was
skipped; but we might as well check for this in the _data() to save
repetition.
The test was laboriously going through the sign cases; relocate the
QString::compare() test's sign() function so that we can use it here,
too, and simply QCOMPARE() signs. Introduce a TransientLocale class,
copied from tst_QLocale, to take care of setting and restoring the
locale using setlocale(). Change the locale name to a QByteArray so
that we save having to convert it to one in order to pass it to
setlocale(). Since that changed every _data() row, reformat those rows
in the process - most of them were long lines.
On the systems where we can't set the locale used by the function
being tested, condition each block of tests in the _data() on whether
LC_COLLATE looks like the locale to be tested, and report how a
determined developer at least can (by repeatedly running the test with
different locales set) test all the cases; and we'll attempt the ones
that we can, when one of the relevant locales is in use. If that
leaves us with no tests we can do, QSKIP() in the _data() to avoid an
assert failure for "Test data requested, but no testdata available."
Change-Id: I75709fda8827dcbe74f80c4136042054da6fcb13
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For user projects we run the static link order check once
'find_package(Qt6 ...)' is called.
If linker can resolve circular dependencies between static libraries
and object files we set the _qt_link_order_matters property of the
Qt::Platform target. This indicates the use of finalizers is not
required and we may rely on CMake-base propagation of resource
libraries and resource object files.
If linker could not resolve circular dependencies depending on
the _qt_resource_objects_finalizer_mode value:
- Finalizer will be called and collected resource objects will be
linked to the target directly.
- Finalizer will be omitted and resource objects will be linked
using the target_sources function implicitly. This only
propagates resource one level up if consumer links the static
library PUBLICly, but all symbols will be resolved correctly
since object files are placed in the beginning of the linker line.
In the CMake version 3.21 we expect that CMake will take care about
the order of the resource object files in a linker line, it's
expected that all object files are located at the beginning of the
linker line.
TODO: Need to confirm that the CMake 3.21 meets the expectations.
Amends 4e901a2f99
Pick-to: 6.2
Task-number: QTBUG-93002
Task-number: QTBUG-94528
Change-Id: Ia68976df8182d3d3007b90c475c1e3928a305339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
System V semaphores are not supported in sandboxed applications,
so when Qt is configured with App Store compliance, or the user
requests POSIX IPC explicitly, we use that instead.
https://developer.apple.com/library/archive/documentation/Security/Conceptual/AppSandboxDesignGuide/AppSandboxInDepth/AppSandboxInDepth.html#//apple_ref/doc/uid/TP40011183-CH3-SW24
As the shared memory name limit on Apple platforms is very low,
we have to skip the existing logic for naming, and instead use
a truncated hash of the key. This should still be fine for
avoiding any collisions in practice.
An explicit check for the ENAMETOOLONG error has been added to
catch any cases where they key goes beyond the allowed length.
Sandboxed applications also have an extra requirement that the
key must include an application group identifier. This requirement
has been pushed up to the user and documented, as we don't have
enough information in Qt to know which identifier to use.
Both tst_QSystemSemaphore and tst_QSharedMemory work as before
with both sandboxed and non-sandboxed applications, after removing
some assumptions in tst_QSharedMemory about System V behavior.
Fixes: QTBUG-91130
Change-Id: Iaf1edb36a5d84d69e42ec31471a48d112faa8c6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 16f927a4f1.
At the time the original change was written, QStringTokenizer
had not been integrated, yet.
Change-Id: I83c31d816199bc48c4baea855d13cbf9eda9aaa2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
User projects can set the QT_PROMOTE_TO_GLOBAL_TARGETS variable to
true so that the various imported targets created by find_package(Qt6)
are promoted to global targets.
This would allow a project to find Qt packages in a subdirectory scope
while using those Qt targets from a different scope.
E.g. it fixes errors like
CMake Error at CMakeLists.txt:5 (target_link_libraries):
Error evaluating generator expression:
$<TARGET_OBJECTS:Qt6::Widgets_resources_1>
Objects of target "Qt6::Widgets_resources_1" referenced but no such
target exists.
when trying to use a static Qt from a sibling scope.
Various 3rd party dependency targets (like Atomic or ZLIB) are not
made global due to limitations in CMake, but as long as those targets
are not mentioned directly, it shouldn't cause issues.
The targets are made global in the generated
QtFooAdditionalTargetInfo.cmake file.
To ensure that resource object libraries promoted, the generation
of the file has to be done at the end of the defining scope
where qt_internal_export_additional_targets_file is called,
which is achieved with a deferred finalizer.
Replaced all occurrences of target promotion with a helper function
which allows tracing of all promoted targets by specifying
--log-level=debug to CMake.
Pick-to: 6.2
Fixes: QTBUG-92878
Change-Id: Ic4ec03b0bc383d7e591a58c520c3974fbea746d2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Makes it able to catch the last bug of saturating color values above a
certain value.
Change-Id: Ib2a3918623a1defe2981efe61cf8118e019e9d4b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Previously, it went direct to QTestResults::addFailure() without going
via the checking for expected failure. Add QTestResults::fail() to
take care of this checking, as for verify() and compare().
Tidied up the code implementing expected failure and QFAIL(), while I
was about it. Adjusted an existing test to verify that expecting a
QFAIL() works, by using QFAIL() instead of QVERIFY(false).
Remove the QVERIFY(false) whose comment brought this to my attention.
[ChangeLog][QtTestLib][QFAIL] QEXPECT_FAIL() now correctly anticipates
a subsequent QFAIL(). Previously QFAIL() counted as a fail regardless.
Change-Id: Icc28cf70e5ff3006363791ea03aa01f2f591eb71
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In commit 287ace562e, part of this test
was suppressed without filing a Jira ticket (or, at least, without
recording it in the QSKIP message). Since it's a known failure, it
should at least be a QEXPECT_FAIL, not a QSKIP. Since only some of the
subsequent parts of the test fail, I used QEXPECT_FAIL(,,Continue) on
each of the failing tests.
Task-number: QTBUG-94450
Change-Id: Iebc6801210c289b4502e59116e71d5901b71aa46
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Its collation (and everything locale-related) is only supported during
the lifetime of QApplication.
Change-Id: Ide97795664d45768e66248d47c3b1da83935b0d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Various QDateTime tests relating to transitions
* used a nomenclature that made them confusing to thing about; and
* expected identically-initiallized variables to behave differently.
The latter, naturally, lead to "expected fail" tests.
Rewrote the tests to get the date-times they want to test at by means
that avoid the ambiguities inherent in QDateTime's lack of a way to
distinguish the two passes through the repeated hour in a fall-back
(QTBUG-79923) and added commented-out tests indicating what should be
true once that ambiguity is resolved. Verified the DST status is as
expected in the cases where that's the correct distinction between
date-times with the same date and time. Renamed various things to
(hopefully) make them more intelligible.
In the process, purged some leading 0s from numbers in code.
Fixes: QTBUG-68936
Change-Id: Id7a348995238b70dcb81a96edb8a3fa5315f86fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test failed when checking for a pre-condition of the tested scenario,
so skip the test if that condition isn't met, as the test won't test
anything.
Amends b1fdcc8c0f.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-64543
Change-Id: I135cd5b45efcae111305b9be338eb5429d3b97d5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test uses a 64-unit array and deliberately clears various portions
of it, provoking a gcc warning:
warning: ‘memset’ used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
The calls to memset() do, in fact, have a sizeof(T) factor in their
size. Suppress this warning for the duration of that test.
Change-Id: I7d144d655a75f5ef4449fa3b956f80bcc509a83b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A mouse press that transfers focus from an open editor back to the view
will close the editor. To prevent that the corresponding release then
opens the same editor again we need to know that the closeEditor call
was caused by the mouse press. Since Qt first generates the focusOut
event, and then delivers the mouse press, we have to start a zero-timer
to check whether we are in the same event delivery process. If so, ignore
the corresponding release.
Add test case that simulates that chain of events.
Fixes: QTBUG-20456
Pick-to: 6.2 6.1
Change-Id: I28fa32bfbc776db207c594c329961f575ae58ea9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
After 79fd1cb2c6 the methods for running
QtConcurrent algorithms in the blocking mode aren't used anymore. Since
ThreadEngineBase and ThreadEngineStarter classes aren't meant to be used
externally, it should be fine to remove startBlocking() methods now.
Removed the unused code and adjusted the tests accordingly.
Change-Id: Ifb13820ce207869d6f720bcb5be8d35bb355fe33
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Rather than when the data is received. Source compatibility is
achieved through double-decompressing the data. This lets us know
how many bytes are available just as before but without having the
uncompressed data left in memory.
Fixes: QTBUG-83269
Change-Id: I352bd09581614c582e4628243e2a0e895ba4946b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Small change needed to make QString_char16 and QString_QChar return -1
in this case, but other combinations already returns -1.
[ChangeLog][QtCore][Behavior Change] QString::indexOf(QChar) and
QString::indexOf(char16_t) now treat a negative start-position, from,
bigger than the string's size as invalid. It previously
clipped such start-positions to the start of the string, inconsistently
with other QString indexOf overloads.
Change-Id: Ic56c8a558bf40a94845c649647db569892d4df02
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QStringList::sort() wants to use the C locale; but, if it failed,
it left that in force, since it only restored the prior locale on
success. It should also use C.UTF-8, since Qt now wants UTF-8.
Change-Id: If62e3d8da682081bf969075a719d03caebf09233
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We need those events to trigger palette color group changes in QQuickItem
without having to connect every item to yet another QWindow signal.
Task-number: QTBUG-93752
Pick-to: 6.2
Change-Id: I8534808cdaab828e5876f8fda31567aeb1b4272a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We use UTF-8 locales by default since Qt 6; and relatively few systems
have the encoding-unspecified locales we were trying to use, with the
result that the setlocale() calls all failed.
Task-number: COIN-689
Change-Id: Id791ba269bf4abac29da3daa4fd01684ca9caa7a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Because they were followed by a QVERIFY(false), no-one noticed until
now. Dates from 2011, when ICU support was first added. I guess
someone fixed the problem in the intervening decade.
Change-Id: I847816c297156e65397c652767f286bc4de193a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without the overloads using QLatin1Char in QL1S member functions results
in the QL1Char being converted to QChar and QL1String being converted to
QString.
Change-Id: Ic19545539a207f025a6293f0b2d929de475dc166
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The relevant test is conducted by tst_Moc::warnOnVirtualSignal(),
added in 2009, <quote>
Fix Warning saying that signal cannot be made virtual
The test for virtual signal did not work.
But we cannot make an error right now or it might break existing code
(exemple in task 210879)
</quote> but without removing the #include, so we do still get a
warning about that when building tst_moc.
Pick-to: 6.2 6.1 5.15
Change-Id: I5ea18058f22bbd483d1ff18b0ca7b360f6674ed9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In my prior attempt to handle the last second of 1969, I forgot that
the QTime we're describing is a local time, so whether *it* thinks
we're at the last second of the day is beside the point. Fortunately,
preceding second should get -2 as return if mktime()'s initial -1
actually meant the last second of 1969, so we can test via that, after
a cheap pre-test to save doing this too often (albeit we only even
attempt the check if mktime() returned -1 in any case).
Restructured qt_mktime() in the process to deal with the error case's
early return promptly instead of doing it in an else clause. Also
repackage the calls to mktime to isolate various quirks and simplify
the logic in qt_mktime(). This also prepares for setting tm_isdst as a
hint when we know when we came from, in massageAdjustedDateTime().
Refined one test, added two more test cases. These didn't fail before
this fix, but a judiciously-placed qDebug() in testing revealed that
localMSecsToEpochMSecs() resorted to its fall-back handling - as if
the date-time were outside the time_t range - due to qt_mktime()
failing, for these test-cases (and several others). This fix evades
that fall-back behavior; a judiciously-placed qDebug() shows none of
our test-cases now fail callMkTime().
Change-Id: I11aa5015191dc4a565c28482307f7bc341c207e7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In setMSecsSinceEpoch(), the CET end-of-time is invalid anyway, so a
whole block (rather than just one sub-test of it) was irrelevant for
the max-qint64 test case (aside from verifying cet *is* invalid).
Split out to a separate test the part of a data-driven test that was
the same for all data rows. Reworked several ill-advised ways to use
QSKIP().
Change-Id: If757d3e722c81fc42a87256125ceef605b6bfb64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before Unicode 4.1.0 there was an error in the example code for Hangul
normalization that used <= on the ends of some ranges of values, where
they should have used < tests. This was faithfully copied but the need
for correction has only lately come to light.
Thanks to Ma Lin for pointing this out and providing the fix and
test-cases.
Fixes: QTBUG-71894
Pick-to: 6.2 6.1 5.15
Change-Id: I5c7fec1f9fac1f7a25b2d5e9c3109a90a7ff49e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
