In NDK r18, libc++.so was renamed to libc++.so.XX where XX is the Android
API level.
[ChangeLog][Android] Fixed build issue with NDK r18+.
Task-number: QTBUG-70631
Change-Id: Id0d2955648197e3054e3c69263b5a90d57964f6c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
the early merging of LIBS* into QMAKE_LIBS* meant that we could not
interleave them properly. defer the merging until the points of use.
Task-number: QTBUG-70779
Started-by: BogDan Vatra <bogdan@kdab.com>
Change-Id: I890f98016c3721396a1f0f6f149a9e2b37d56d8e
Reviewed-by: Liang Qi <liang.qi@qt.io>
it's unused now, and just complicates matters. its interaction with
LIBS_PRIVATE & co. has always been a bit shaky. google produces no
public hits outside qt itself, so let's assume it really remained
internal.
Change-Id: I6606bbabd44f1b76d84e97219e155e38d6f1b3a6
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
this was introduced in 2002 supposedly for qnx4, but doesn't appear to
have actually been used ever. remove it, as it's in the way now.
Change-Id: I54dcabb61e1d3609a1e7a9fa4ff4b25509cfdb7a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Those system calls are present in glibc 2.28. Instead of using
syscall(3) to place the system calls directly, let's use only the glibc
functions. That also means we no longer accept ENOSYS from either
function, if they were detected in glibc.
Change-Id: I44e7d800c68141bdaae0fffd1555b4b8fe63786b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
QWinRTBackingStore::flush() was not considering the possibility
that the supplied region may fall partially outside the bounds
of the paint device. This resulted in possible accesses to invalid
memory addresses, causing a crash. This bug was exposed by an update
in ANGLE that was causing a crash when running tst_QTableView::bigMode
with a small screen size. With this fix the function will use the
intersection of the supplied region with the paint device bounds.
Change-Id: I2f0f0f7f5510688bfa1459320a0c146df6be65d1
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
lld for coff/mingw doesn't support linker scripts, which qmake used
for passing larger numbers of input file names to the linker.
Instead of using a fullblown linker script for this, just use a plain
response file, which both lld and binutils ld support.
Change-Id: I3aace7902fa6ca861a0a9fe67feaa236e7ea417b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It is not always easy to spot the compiler version in the build or
configure log, so report it explicitly to make our lives easier when
trying to figure out why a specific build might have failed.
Change-Id: I1c84199aad4a98a30b0b4c4fbf2554008dc3ba2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts commit 341bfcd1ea.
As it turns out there might be use cases where we want to have proper
windowing system event integration with glib dispatcher via g_source_attach().
For example with gtk_dialog_run, where GTK blocks in a recursive main loop.
We want to continue dispatcing our windowing system events during this nested
event loop. Not having a proper glib integration can result in rendering issues,
e.g. when resizing parent window via mouse while GTK-based dialog is shown. Can
be seen on examples/widgets/richtext/textedit/ -> Format (from menu) -> "Color..."
The issue from 341bfcd1ea actually should be fixed inside XCB platform plugin,
by improving integration with event dispatcher. That is handled in follow-up patches.
Change-Id: Icabc6d841a554aefbdd460765a3165d22e65f651
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
xcb_poll_for_queued_event() was introduced in libxcb 1.8.
The minimal required libxcb version was bumped up to 1.9 in
1f5d791708. Before this version
bump we needed the runtime check to support older versions
of libxcb.
Updated connections in the event reader to use the new signal
and slot syntax. Removed threadedEventHandling() method because
now it is always 'true'.
Change-Id: I0bce61fd478a871d35e676239ee5280c4f40be8a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The remaining diff to clean 1.6.35 is archived in the qtpatches.diff file.
[ChangeLog][Third-Party Code] libpng was updated to version 1.6.35
Change-Id: I925b3d95f6da20e12fc3274b4713e3fea05094f7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
According to the Khronos documentation, gbm_surface_create() will give
a BAD_MATCH error if the format does not match the EGL_NATIVE_VISUAL_ID.
Newer drivers have started to enforce this.
Change-Id: I61360b0f52965ad8057e7de8f824ffca64fea904
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
A few places we didn't check if detach() succeeded including
in reinterpretAsFormat(), where it can be undone.
Task-number: QTBUG-70785
Change-Id: Ibcc8e26e2961f6288eb7a045ae1cb28e59213a49
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
If you, directly after connecting, call "ignoreSslErrors()" followed by
"resume()" then you will most likely crash.
It is very contrived and there's no reason to do this.
Change-Id: I949a303238f5012296d0e84eb76173764eb9de2e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This fixes configure with win32-clang-g++ as the native compiler.
Change-Id: Iced43d70b9a0aa413d1f5f6034b42b976cb7c39e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
and fix handling of incoming binary data
Change-Id: I31e97505ad4ff64cf8e380df5d0d6b70c3cd60b0
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
It has had some changes and should be kept up to date.
Fixes: QTBUG-70386
Task-number: QTBUG-70852
Change-Id: I868a558811c34cf5a800c3087a0ca96e7fb49b1a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QList, QVector and QVarLengthArray check the validity of iterators
passed to member functions using isValidIterator(), which checks that
the underlying pointers are in the range [begin, end]. This check is
well-defined when the outcome is positive, ie. when the iterator is
valid. But if the iterator is not valid, and does not happen to point
into [end, begin + capacity], the comparison, which uses normal
operator<, invokes UB.
Fix by using std::less<T*>, which defines a total ordering.
Change-Id: I1e5757789b4b9779f5e3e298e7f2b2dd0b27576c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The version we're using is at least seven years old.
Let's try staying up to date ...
Change-Id: I450a2fc37c22740fe554a81b471bf0fad340498e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Likewise have mutating operator[] insert an invalid entry at its
target index, if beyond the end of the array. This makes it possible
to fill an array from high index to low, for example.
Change-Id: If71699c20e2623142214ce2c11c4d6e4a120c989
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Applications with target SDK version lower then 28 running on a device
with version greater or equal to 28 will cause compatibility warnings,
so default to none when the extract_android_style value is set to
default.
Note that the new value "default" was introduced to allow this kind
of changes in the future, i.e., selecting the best solution based on
some simple heuristics. Adding a new value also keep compatibility and
allows the user to explicitly set a value when needed.
Task-number: QTBUG-69810
Change-Id: I68301716767870ce6de40e45742d9c5fc263ee25
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Modal sheets are supposed to appear below the toolbar if a toolbar
exists, or below the title bar if a toolbar doesn't exist.
In the unified title and toolbar mode, sheets should to appear
directly below the toolbar, if the toolbar is positioned at the
top of the window.
Code-wise we achieve that by calling setUnifiedTitleAndToolBarOnMac on
a QMainWindow, which results in adjusting the top content border of
the NSWindow via [NSWindow setContentBorderThickness:forEdge], which
Cocoa uses to position a modal sheet (the sheet top edge is aligned
with the top edge of the content view + the Y border thickness
value).
The issue is that because NSWindow.titlebarAppearsTransparent is set
to YES, for sheet presentation purposes, Cocoa considers the content
view to begin at the position of the top left corner of the
frame (where the title bar is), and thus sheets appear somewhere
in the middle of the unified toolbar.
To fix that we need to account for the title bar height in the
border thickness value.
Compute the title bar height from the window frame height - window
content view height, and add it to the top border thickness value.
Amends 8ac9addd94
Change-Id: Icf85c513035cc3710b438e60eb14dc04c5bbaced
Fixes: QTBUG-65451
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
For winrt we cannot rely on the fact, that QThread::current will be called
from the correct thread for the first time. The application's main entry
point creates a suspended thread and starts it right afterwards. At that
moment, other functionality (QLoggingRegistry for example) might have
called QThread::current, which set the wrong thread as the main thread. In
order to avoid this situation, the main thread is explicitly set in
QCoreApplication's constructor.
Task-number: QTBUG-66418
Change-Id: I8b6347357a80eb395ae758bd3d420adef0826751
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The height of a line edit depends on the height of its font,
which in turn depends on DPI. So use the DPI-scaled icon size
from a style instead of hard-coded values.
Task-number: QTBUG-65627
Change-Id: Ic1f5af61b0d6346cfbc828817c4a3a39296a41ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There is no need to apply QMAKE_LFLAGS_NOUNDEF in a .pro file that loads
qt_module.prf or qt_plugin.prf, both of which do the same.
Change-Id: I1ec86cddb4d0991becc136f8bd50d6652c885a6b
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Check on the application state before requesting activation.
Fixes: QTBUG-70810
Change-Id: I550137dc00209b17f4b3c033287ceef1b871ff50
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
qabstractitemmodeltester.cpp:223:31: internal compiler error: in expand_expr_real_1, at expr.c:9170
Change-Id: I098c1bdf706512c91c649205f4675de0ca374227
Reviewed-by: David Faure <david.faure@kdab.com>
The documentation for key bindings was a little bit unclear for key
asterisk. Also sync the names of the left and right key was not
consistent (Left/RightArrow - Left/Right)
Change-Id: Icee0821880fcc3ebc2ade939cf80127ebf0976ad
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
In iOS, the system certificates cannot be accessed, so this function
will return an empty list for the default configuration.
Task-number: QTBUG-60407
Change-Id: I0d691a0dd5e6367594e71c7ebccfbdc866d4a3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
