The patch to elide the QToolButton text when there is not enough space
introduced a regression with multi-line text.
Fix it by using the newly introduced common function to elide multi-line
text.
Fixes: QTBUG-72226
Change-Id: I066ebbd2f360add93406cc29bb4bbbebf599ba42
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Factor out the calculation of the elided text from
QCommonStylePrivate::viewItemDrawText() so it can be used by other
painting functions.
Change-Id: I28e6bfd2fe4d7c552848446fa9913df78589d15b
Reviewed-by: Christian Andersen <csandersen3@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Try to better describe what it is and what it does. Also mention
its strongest use case.
Change-Id: Ib5c3e8a3c9b96169c139c5d7e8995a6a49d7d5e1
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
GCC for 64-bit Windows has a bug that it fails to properly re-align the
stack pointer for use with 256-bit memory addresses (AVX). Therefore,
there's about a 50/50 chance that any function using AVX will have an
improperly-aligned stack. In release mode, stack accesses should be
rare, but in debug mode they happen frequently. Either way, this is a
ticking time bomb, so we disable.
Clang is not affected.
32-bit MinGW is not affected.
64-bit in other OSes with GCC are not affected.
Fixes: QTBUG-73539
Change-Id: Id061f35c088044b69a15fffd1580967808f31671
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since the official v4l-utils-1.12.0 release, media_get_entity_by_name() function expects
only two arguments instead of three as in older versions thus breaking build of eglfs_kms_vsp2
backend.
Cf. https://git.linuxtv.org/v4l-utils.git/tree/utils/media-ctl/mediactl.h#n253
Fixes it by creating an overloaded wrapper function that will choose the right
version based on the signature of the media_get_entity_by_name function pointer
argument.
Fixes: QTBUG-73427
Change-Id: Idab52558b6f2f23137456c21e33ece1ef0e9aa4e
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
If we have have AA_EnableHighDpiScaling on and have loaded a @2x image, layout
calculations can't use the real pixels of the QPixmap directly.
Fixes: QTBUG-73401
Change-Id: I1891411a0e359e0148476f73b6cc3a128893a374
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Header files of modules that specify generated_privates are usually
not yet available at qmake-time. Thus, the installation rule must not
check for the file's existence.
Change-Id: Ifc7ff95422912d255744c9006382ff181176ae77
Fixes: QTBUG-71340
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By only looking at the function prototype, it's tempting to assume that
the handler needs to be registered with the usual SLOT macro. That is
not the case.
The code snippet is already included in the class description, but it
doesn't hurt to repeat it here.
Change-Id: If24fdca41a4bd976ebd1156c9e1106469388265c
Fixes: QTBUG-50484
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The non-qualified hue() and saturation() etc. refers to those values
in the HSV, not HSL, color model. Make this more explicit in the
documentation to avoid confusion.
Task-number: QTBUG-73129
Change-Id: Ief337672966ac72d0d0c3606d8d68acf01ffe7ee
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The read_xbm_header() function is used to check for valid file header,
containing valid width and height values. But in case of an invalid file,
the check could depend on uninitialized variables.
Change-Id: I9f933ed6e38d86109e5b5a8d55fe763ab928d749
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The rendering of a css styled menu item with icons or checkmark was
partially fixed with aa1bc47942 but
introduced some other painting regressions, especially in RTL mode.
Fix it by syncing the code with fusion and windows style. With this
patch a menu text with a check mark but no icon is now aligned exactly
the same as a menu text with a icon.
Fixes: QTBUG-66380
Fixes: QTBUG-70491
Fixes: QTBUG-72817
Change-Id: I83a95d15eb130e7f72471820b53c3cd5554d9334
Reviewed-by: Nick D'Ademo <nickdademo@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If a window needs display due to e.g. being resized, we need to wait
until the corresponding expose event has been delivered before we
resume update requests, otherwise the update requests may result
in partial paints that do not fully cover the area needing display.
Change-Id: Ibfb54bfe3c2e85b606ef67d34a6a5fdb85456edd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This makes it much easier to have the version information set for an
Android APK without having to manually modify the AndroidManifest.xml
each time.
[ChangeLog][Android][qmake] Can now set the version name and code for
Android using ANDROID_VERSION_NAME and ANDROID_VERSION_CODE respectively
in the pro file.
Change-Id: Ie6813bc3a7444f7baa5e772b93bc2695d9b81e57
Done-with: Markus Maier <markus.maier@rosenberger.de>
Reviewed-by: Markus Maier <markus.maier@rosenberger.de>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
If the user changes the .pro file, the Makefile is supposed to be
re-generated by calling qmake again. NMake however lacks a "Makefile
remake feature" like GNU make has.
The generated Makefiles for nmake however have already a proper
Makefile target that can be used to re-generate the Makefile. What was
missing is the dependency from an entry-target in the meta-Makefile.
Now changes in the .pro file trigger a re-generation of
Makefile.Debug/Makefile.Release when calling nmake without target
arguments or with "debug" or "release".
Fixes: QTBUG-29193
Change-Id: I9f2dd5deba4a043ab6c9502bb0b0ba83dc843612
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
1. Removed all Qt header files and make it a pure win32 project because it doesn't use any Qt features.
2. According to MSDN, CommandLineToArgvW is in shellapi.h, so replace ShlObj.h with it.
Change-Id: I3daacb97f34664ac36f8e887a2c31d38f611b16e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QSharedDataPointer obeys the regular Qt container thread-safety rules:
it's thread-safe in const methods but not in mutating ones. QSDP::data()
is mutating, which causes a data race. For example, if the contained
QLocalePrivate has a refcount of 2 and two threads see that, both
threads will try to detach and then replace the pointer, but that
pointer replacement is not atomic.
Using QExplicitSharedDataPointer makes the race go away, since data() is
now non-mutating. QESDP is used only to destroy the QLocalePrivate on
program shutdown.
Note that there are still race conditions relating to *updating* the
locale private.
Fixes: QTBUG-73403
Change-Id: Id98140e1c2f0426cabbefffd157ed6ec30a3e08f
Reviewed-by: Thomas Sondergaard <thomas@sondergaard.cc>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Google removed this support long tima ago, also we removed it from QtCreator.
Change-Id: I326da09e9e57f655eecfd1f25f39b4bd9c6784d1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When spliting the patch the edit become an addition instead.
Task-number: QTBUG-72785
Change-Id: I92105d0e23e9b8426228f4202d46fa41f928fb94
Reviewed-by: Christian Andersen <csandersen3@gmail.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Where non-format characters appear in the format string, they are not
"ignored" as claimed; they are passed through verbatim. Formats
without separators between fields are in fact supported, although
results may be ambiguous. Cleaned up phrasing in the process.
Fixes: QTBUG-51208
Change-Id: I7284a36c48aa0be29deaa16945ca0212e9e6f72c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
It was incorrectly counting a block having more than one line as having
changed visibility.
Fixes: QTBUG-69310
Change-Id: I502cda1d3e8a4efb1c14122353cc0a4731d8581c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
OpenSSL 1.1.0 and higher requires SSL_shutdown to mark a
session as resumable.
QHttpNetworkConnection/Channel tries to re-use one shared SSL
context (and the session) for its 'channels'. The session is
marked as non-resumable without shutdown sent/received.
This makes it useless for QHttpNetworkConnection.
See: https://github.com/openssl/openssl/issues/1550
Fixes: QTBUG-71967
Change-Id: Iaaceb18c4c5a090f997f9850981a27f04f1f8b06
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
For some reason, displayRectIgnoringOpacity renders NSBox with a
smaller height than we asked. So let's ask for more and translate.
Change-Id: I6e03ad99d1ccf746c89d58dd37d53d0087f15282
Fixes: QTBUG-71741
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Like we do with fully matching format, pick the first matching one,
instead of the last matching one.
Fixes: QTBUG-72785
Change-Id: I466e0152a229348b6a3786d5464d1f8ab325d67a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QPictureIO::read() is using pictureFormat() when the format has to be
guessed. pictureFormat() returns a QByteArray which was implicit
casted into a char* and then pointed to uninitialized memory.
Fix it by using a QByteArray instead a plain char*.
Change-Id: If9ae286ed68134af597f0b0c779789e40f9efaed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unused resources
----------------
Unused resources make applications larger and slow down builds.
Amends e3689949ba. The string
was introduced there but not added to the manifest.
Task-number: QTBUG-72895
Change-Id: Id07e02074feb15ace2c99e6ace51d8fe407877fa
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The object role may in some cases (e.g. when using
Qt Quick Loaders) be changed after construction, and
we don’t have RoleChanged events.
Change-Id: Idb246c1c1206221cacd93c83cbd07a0e3d98cb0e
Fixes: QTBUG-72967
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
