From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Added new header templates and corresponding license files. Unnecessary
ones will be removed later when license header change is done to all
Qt modules
Change-Id: I8c482d81e40c03f0c6395e437f55527617aa6b58
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... use QByteArray::append(char*,int) instead.
Also cache the return value of the out-of-line function
xcb_get_property_value_length().
Saves ~120b in text size, and a heap allocation.
Change-Id: I4d1deafdcd3345f2b7dfbf8c45702cfee733a269
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Required to change an erase() loop into std::remove_if to
avoid running into quadratic behavior.
While at it, made QXcbXSettingsCallback a proper struct,
used aggregate initialization, and ported another loop to
C++11 range-for.
Saves ~0.5KiB in text size on optimized GCC 5.3 Linux AMD64
builds, and a lot of heap allocations.
Change-Id: I228bb853519ed2590375dc511e527f47bb8daa34
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This adds a way to resume reading from a stream after a ReadPastEnd error.
This is done by introducing a stream read transaction mechanism that keeps
read data in an internal buffer and rolls it back on failure.
[ChangeLog][QtCore] Added QDataStream startTransaction(),
commitTransaction(), rollbackTransaction(), abortTransaction()
functions to support read transactions.
Task-number: QTBUG-44418
Change-Id: Ibf946e1939a5573c4182fea7e26608947218c2d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the presence of a [Paths] section causes QLibraryInfo to derive all
property values according to the Qt default directory layout,
disregarding the compiled-in paths from configure. consequently, we need
to write them all to qt.conf as well.
Change-Id: I3558e9aef1fce956812ea91e216f53bf7934c285
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
there is no point in overriding the built-in defaults with the same
values.
Change-Id: I24f66b86f751f7044625b5256f3d979ece782cf7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
Same as the SSE4.2 implementation: use the (optional) ARMv8 crc32[bhwd]
instruction to calculate hashes for strings. For Aarch64, support for
the instruction is dynamically detected. For a 32bit ARM binary, dynamic
detection is only done when the compiler is explicitly told to target
ARMv8. When telling the compiler to target an other/older version, the
crc32 code is not compiled.
Change-Id: I51ebc1a4545dede4988247e75043f29a64c2a6c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added a new overload function that allows the developer to
specify the desired precision. Until 6.0, it will require
the symbol and precision to be passed to it. Once Qt is at
version 6.0, it will replace the overload function that
requires a value and optionally a symbol.
[ChangeLog][QtCore][QLocale] Added an overload for toCurrencyString()
that allows the decimal precision to be specified.
Change-Id: I1fb7dde3583f46de2ed20ec2a7abaeca23a903ef
Task-number: QTBUG-46595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... so we can drop the user-defined copy special member
functions and the destructor.
As a side-effect, enables the move special member functions,
which were previously inhibited by the presence of the
now-removed functions, and makes the copy constructor safe
for self-assignment.
Change-Id: I430f83a6a08b1f5ee94b52f52e4d80fa1139d1c1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Make a private member mutable to enable default assignment operator.
Change-Id: I1216875c186ed800e07c6b41a5bae18c3b71b2fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Introduce a transaction mechanism that gives the ability to read the
data atomically. Current implementation supports transactions for both
types of devices. For sequential devices, it records the whole input
stream during transaction. For random-access devices, device position
is saved when transaction starts. If an error occurs, the application
may be able to recover the input stream by rolling back to the start
point.
Also, QIODevice::peek() was rewritten to make use of transactions
internally. The replacement of QIODevicePrivateLinearBuffer by
QRingBuffer is closely entangled with that, which makes it unfeasible
to do separately.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
[ChangeLog][QtCore] Added QIODevice's startTransaction(),
commitTransaction(), rollbackTransaction(), isTransactionStarted()
functions to support the read transactions.
Task-number: QTBUG-44418
Change-Id: I3564b343ebeeaaf7c48a1dcdb7ef0a7ffec550f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This fixes the problem as long as we have C++ 11's semantics for
in-function statics. The Q_GLOBAL_STATIC_WITH_ARGS() is a non-trivial
wrapper whose destructor gets unloaded with the plugin, leading to a
crash-on-exit if the global it wraps outlives the plugin. The plain
(in-function) static manages to avoid this by avoiding the wrapper.
As the static was only needed in one place, this proves a sufficient
solution to the plugin-unload problem *in this case*.
Task-number: QTBUG-45891
Change-Id: I599fbee0b55ece4dceb4bf7202db374b507f5388
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The same message is already printed on UDP and buffered TCP.
Change-Id: I533baf97fe7e1359a38db3c3eb31d0463fe158e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code was checking the write buffer in a branch for unbuffered sockets.
Change-Id: I4dc722e7f182562332c3d167e6ebbab7f53f51e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... such as GCC.
truncate(0) was chosen because it is already used throughout
the function. Using clear(), say, which is inline, produces
slightly more code.
As is, saves 160b in text size on optimized GCC 4.9 Linux
AMD64 builds.
Change-Id: I415d09ad2b4547f1d69f78d85e2aa1c1f9a17ed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Saves just 168b in text size on optimized GCC 4.9 Linux
AMD64 builds, but most for loops are in non-Linux code.
Change-Id: I4f20a65c2e4953011308ff831c9e8fa37a25274b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was already movable, so it's BC. Only needed to add
nothrow member-swap and nothrow move assignment.
Change-Id: Iefedb877078da8ee075eb67185eef221143ddec1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For HSL colors, the (heavily over-parenthesized) code compared hslHue
values mod 36000, _and also_ for equality. Of course, the second
comparison is dead code.
This was a cut'n'paste error from the non-HSL comparison.
So, remove it. And also some of the over-parenthesization.
There are no tests for operator==, and the HSL color comparison is
completely opaque for me, so I'm not going to write any for this
trivial change.
Change-Id: I74572273730cb5cc9f427c524c268ba3f90304c1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Saves a bit more than 0.5KiB in text size on optimized
GCC 4.9 Linux AMD64 builds.
Change-Id: I3b7e4751c4799c3e2c9f8f23b769e1659d863579
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It just prevents the compiler from synthesizing move
special member functions, something that is very much
desired, seeing as there's a QVector member.
Change-Id: I4daabb380cd73dcacf3f514827b84562767a7a20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: I4ac03ac0e893fc5dbb5e45131fcbfe82f1564bee
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... each time around the loops. Cache it.
Also use QStringLiteral, since the string will never be
modified.
Also saves 96b in text size on optimized GCC 4.9 Linux
AMD64 builds.
Change-Id: I0269586235da18f3073a553739561ea7db6356e8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
For almost the whole of its life time, 'realname' has the same
prefix, but the old code used the same string-builder expression
to construct it over and over again. If QStringBuilder would
re-use the capacity of the LHS object, that would boil down to
just a bit more copying of characters than necessary. But
assigning a QStringBuilder expression to a QString works by
implicit conversion of the QStringBuilder expression to a
QString, followed by move-assigning the new QString into the
old.
The new code keeps the common prefix around, resetting
'realname' to that prefix with truncate, only appending the
varying suffixes. In this way, one memory allocation per
assignment is saved (ignoring a potentially required capacity
increase in one of the appends here), and also some out-of-line
QString dtor calls, since op+=(QString&, QStringBuilder...)
doesn't create a temporary QString.
Also saves ~1KiB in text size on optimized GCC 4.9 Linux AMD64
builds.
Change-Id: I0872a69c9111d7218567f06f8fefb010f2430532
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It turns out that f558bde was not enough to stop a crash when
trying to access forceTouchCapability of traitCollection. The
reason is that traitCollection is available on UIScreen starting
from iOS 8, while forceTouchCapability is available on
UITraitCollection starting from iOS 9. So only checking the former
will cause a crash when running on iOS 8.
Change-Id: I44f9fb785349694004fbf2f48fe3b85bb01d9a5a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Whether or not to call XInitThreads() doesn't apply since Qt-5.0's switch to XCB.
Change-Id: I5f1e5e664a251c98af6357c87fc9a6bb03a46ce3
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
The code says (for Q_OS_UNIX)
if ((mode & QAbstractSocket::ShareAddress) || (mode & QAbstractSocket::ReuseAddressHint))
socketEngine->setOption(QAbstractSocketEngine::AddressReusable, 1);
so clearly ReuseAddressHint does the same as ShareAddress, which is: setting SO_REUSEADDR.
Change-Id: Ic2ab4d139c3f58c3c63723fc609a9d4f71bac97a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: I9686d117e092f5d74c6e74a462adf503a7b7ae79
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This has only been identified by WACK for Windows 10.
QWinRTWindow::setVisible adds a Window to the screen and immediately
tries to set the native visibility. This only works when the system
events are handled immediately. While this is the case most of the time,
certification tests revealed that this is not always the case. We have
to flush before setting the element visibility.
Change-Id: Ifce4c045c185c57bc386a4e832074fb84f5d0053
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
According to MSDN Tls* is inline replaced by Fls* on Windows (Phone) 8.1
and beyond.
However, this does not seem to be the case for Windows 10. An
application links against Tls* and the certification step fails due to
using non-allowed APIs.
Hence we do the inline replacement manually. QThreadStorage and QThread
tests continue to work, so it seems to be an oversight by Microsoft.
Task-number: QTBUG-50292
Change-Id: Ice1b6e54fcee238c94af5c6fb1753d903db7476d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
When shutting down an application on Windows Phone the SceneGraph tries
to create an offscreen surface to render into. If there is no offscreen
surface available, it creates a new native window and tries to hide it.
As the native event loop is about to shut down, creation fails and
exceptions are raised. Instead we create a vanilla
QPlatformOffscreenSurface. The SceneGraph recognizes it as such and can
handle a proper cleanup on its own.
Furthermore removing the suspend/resume handler in the destructor of
QWinRTIntegration fails for Windows Phone as the application object
itself does not accept this anymore. Hence skip this part for this
platform.
Task-number: QTBUG-49310
Change-Id: I02acdd5a635ef0b9d6ef8199376537b8f0f1a8fb
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Do not create a dummy eglDisplay when the global static is constructed.
This causes ANGLE to wrongly set some internals, which breaks usage of
EGL_PLATFORM_ANGLE_ENABLE_AUTOMATIC_TRIM_ANGLE as the attribute map
might be empty after calling eglGetPlatformDisplayEXT. Furthermore
initialize() assigns a new display to it without terminating the old
one. This way, the internal suspend handler in ANGLE (Trim11.cpp) will
be added to the application.
The suspend handler is not invoked when an application suspends though.
Reason being that the handler needs to be added from inside the Xaml
thread. As we cannot control this inside ANGLE, we will call
eglInitialize inside the Xaml thread and hence get the suspend event
properly.
Task-number: QTBUG-50337
Task-number: QTBUG-50292
Change-Id: I3867377254c37084bf24f18e78af467f6237db57
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
CMake newer than 2.8.12 automatically adds the
appropriate flag, but CI still runs 2.8.11.
Change-Id: Ie61375f2feb54a92c9d8f0ed6ad5227a67343bc5
Reviewed-by: Stephen Kelly <ske@ableton.com>
Note the excessive escaping around "GNU".
Otherwise this leaks the -fPIE flag to the target.
Change-Id: I340df5d5bce00ebec4e1ff3a557ade67022ba23b
Reviewed-by: Stephen Kelly <ske@ableton.com>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: If30c6c99a775aec07eef9ddf953e944dc916b5a2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When recursing over the windows, the code did not take into account
that EnumChildWindow enumerates grand children as well. Exclude
those by checking for the direct parent in the recursion so that
the hierarchy is printed correctly. Add more information about
class and module and rearrange the output a bit so that the window
title is more prominent.
Task-number: QTBUG-50206
Change-Id: Iffb12c44eda9d09da5eb14a8405aee52ed3aa849
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Widen its interval (to work in more TZs) and test spring as well as
autumn. Anywhere that does have a DST transition probably has it
between August and December; and there's no benefit to using a narrow
window.
There's also no sense skipping the test if we don't know there's a DST
transition: the test should still work, it just won't be testing
anything (about DST transitions).
Combine date and time checks into date-time checks, so that, when one
of them fails, QCOMPARE lets us know how the other changed, too.
Task-number: QTBUG-49008
Change-Id: I145b939ffef0dd0b54fd0e3cdf72a159c57ec00b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just fuzzily equal. The fuzzy comparison fails for infinities, since
the expression p1 - p2 where p1 = p2 = infinity is NaN. And NaN
comparisons are always false.
As a nice side-effect, we don't do the more expensive computation of a
multiplication if the two numbers really are equal.
Task-number: QTBUG-50036
Change-Id: I11f559ef75544c50b3f8ffff1420cec7c7273295
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It only needs stdin now, instead of stdin plus a separate file containing
a list of file names.
Change-Id: I9f3db030001e47e4a4e5ffff1425b76884cc7ca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
