VS 2017 still uses vclibs version 14/140 and it also strictly requires
the vclibs' publisher to be set in the manifest. As we only support VS
2015 and 2017 the condition for adding additional vclib dependency
information can be dropped.
Change-Id: I813a9ad976339e347fd8d9283d92282e86b2791b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
complements commit c5e687895d
added missing noexcept (void)StoredMemberFunctionCall specialization
to disambiguate template selection.
Without these specializations, StoredFunctorPointerCall was a better
match, which led to compilation failure
Task-number: QTBUG-58142
Change-Id: Ibd41057d9a497f057a895d73277902e90300ed7a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Significantly reduces the number of objects left to rot in the root pool,
which is only drained on application shutdown.
Change-Id: Iad7520ab083715416d95413a63474b9153f22fb5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
So that any objects autoreleased during application initialization are
released. Otherwise they will end up in the root level pool and only
be released when the application exits and the application goes out
of scope.
Change-Id: If02d24fd70098f9b4b1b0ea3218e0a15e438b9db
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Use the new qmake install command to copy files around, in order to
avoid the '+' trap of the Windows copy command.
Task-number: QTBUG-60214
Change-Id: I7f588dbbfcdd89b7e98dbef7757944ca856815aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Otherwise dashed polygons will not be closed when stroked like they
are documented to be.
Task-number: QTBUG-60397
Change-Id: I58e9e3a06af157f9a2789ccab640c9da75867962
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When handling WM_NCCALCSIZE in a global filter, the associated platform
window needs to be assigned to platformWindowPtr so that its frame
margins can be updated on return.
See also 3035400f36, which introduced the
platformWindowPtr out parameter for this purpose.
[ChangeLog][Platform Specific Changes][Windows] Fixed frameMargins for
WM_NCCALCSIZE when handled inside with QAbstractNativeEventFilter.
Change-Id: I7827b81d30a5c80dad591206a88712169dea0108
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleans up the rgb32 text-blending functions, so they now follow the
new pattern used in the new generic text-blending functions. This
also means they can now handle gamma-corrected blending on top of
transparent destination pixels instead of falling back to naive
blending.
Task-number: QTBUG-60469
Change-Id: I154ba513ff99c0cefab8fa12f4ed43fcd6563a6a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Amend commit e6bf237669 to correctly
cache the abi in config.cache and set QT_BUILDABI to the correct target
ABI when cross-compiling.
Task-number: QTBUG-60441
Change-Id: I4ebfce9d6266be2a3225034fbf3aff08e7fdc5d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When the tabbar styling was improved in change
175f33ed85 it changed
PM_TabBarBaseHeight to 21 which is incorrect as this value represents
the spacing between the tab pages and the tabbar. In macOS style
there is no space so this should be set to 0.
Task-number: QTBUG-60307
Change-Id: I2ce39ff2fc924d2d83843fab78b311153b4ee08f
Reviewed-by: Oleg Yadrov <oleg.yadrov@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
If the user calls QLocalSocket::setReadBufferSize() with a value less
than the current size of the pipe buffer, startAsyncRead() would call
ReadFileEx() with invalid parameters:
ReadFileEx(handle, nullptr, some_big_value, ...);
Change-Id: I3d153e3ec34f8038dc001c1c896aeceb666a8979
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In some cases, we'd want such value to come from the
platform theme, but we'd need new API for this.
Change-Id: Ic7053fa17ac8b2f207db031095c4e4aefae000c2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Adds default off configure flag to use compiler optimizations
for size instead of the default speed/size trade-off.
Change-Id: I36702064ef2cc743d2d03a386adf5cefd5371b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change the check for the unambiguous match to be case insensitive.
Task-number: QTBUG-60466
Change-Id: Iaa019cc803a56b015f45309fb1b3a7a8a3d82ee4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If vaoHelper is not valid the vao variable was being initializated with
a random value.
Change-Id: I44962841baeb1a1cff3124d6126e19c791feaea3
Coverity-Id: 171484
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fix a few lingering doc references to the old classes.
Task-number: QTBUG-59815
Change-Id: Ia6b406485260c943b018422aaeb8e22ca4406e81
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
... as this would require us to remove usage of QAbstractEventDispatcher::flush
from Qt source code as well. We can not do this already in Qt 5.9 as there are
few event dispatchers in Qt that actually do override the ::flush (with non empty
bodies). Removing this code could result in behavior changes (not very likely) for
some user code. This method will be removed in Qt6.
Instead mark it with a well known "### Qt{Version}" comment.
This patch amends 41eefd7. The warning was:
qcoreapplication.cpp: In static member function ‘static void QCoreApplication::flush()’:
qcoreapplication.cpp:733:48: warning: ‘virtual void QAbstractEventDispatcher::flush()’ is deprecated [-Wdeprecated-declarations]
self->d_func()->eventDispatcher->flush();
Change-Id: I48a1c68b84ff93268956205e1205e6d4b5d48664
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the options are mutually exclusive, with the last one winning.
Task-number: QTBUG-60382
Change-Id: Ie6d888ac8be6b22b204fcad93c184477baa38965
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
instead of calling eval() on the entire output, loop over it line by
line, because:
- the first line is a message, not a variable assignment
- eval() can process only one statement at a time
Task-number: QTBUG-60255
Change-Id: Idca652910c8f2c852372d486c51c8554bc708dcf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
delaying the logging setup until the cache use is determined (which
depends on xspec determination) causes too much trouble.
as already explained in 7ac15ab0f, there is a bit of a gray area when
exactly the log should be cleared anyway.
a more complete solution would cache the tests' output along with the
results and re-log it (with an appropriate marker) upon re-use.
Task-number: QTBUG-59565
Change-Id: I17d457598d885bceafd6505cad5ff074c4ace502
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The result of "make install" should be the same regardless of whether it
has been run multiple times and the destination exists already. This is
done by making the file installation calls always take canonical source
and target paths and not look at the target directory.
Task-number: QTBUG-60370
Change-Id: I83a584c0dbc4fd10c79976d4169bf6bc051884a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
I don't know why.
tst_qflags.cpp(114): error: no instance of function template "verifyConstExpr" matches the argument list argument types are: (Qt::MouseButton)
tst_qflags.cpp(91): note: this candidate was rejected because there is a type mismatch after argument substitution
Change-Id: I84e363d735b443cb9beefffd14b9581d77933cb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Change-Id: Ib7cf5db6c9a49e7f359410bc0ec3d1ceadcde5cf
Reviewed-by: Stephan Binner <stephan.binner@basyskom.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This was dropped by commit 740ff1b8 in preparation for clang-based
C++ parser in qdoc. However, the old (current) parser still needs it,
as some of the functions to document are wrapped with those macros.
It does not interfere with the clang parser anyway; unlike the old
parser, clang will not resolve the wildcards in macros.
Change-Id: I3135a263e8eb200a11b1e918c776e3a2c3ec5fb6
Reviewed-by: Martin Smith <martin.smith@qt.io>
The intersection algorithm for intersection with rects, might return
one edge of the rect even if that edge does not intersect with the path.
To deal with that we collapse paths with empty bounding rects to the empty path.
Task-number: QTBUG-60024
Change-Id: I3e305983c66548e772d7d7ce3de99d715edbdd1b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
I don't know how widespread this use is, but apparently sddm seems to
set DESKTOP_SESSION to be the .desktop file that it used to launch the
session (minus the .desktop extension). In that case, we should read the
DesktopName entry from the file to get the actual desktop type.
And since the desktop detection from QGenericUnixServices should
suffice, we don't need to repeat the same code in QGenericUnixThemes.
Change-Id: I0e1a09998253489388abfffd14b5eeefbd7fe740
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
They have not been tested with Qt 5, not even once to make sure
that the mkspec passes the sanity check.
This removes for OSes:
HP-UX (running on PA-RISC -- Itanium still supported)
SGI IRIX
SCO Unix
Tru64 Unix
Unixware
And compilers:
IBM xlC (Visual Age C++)
HP aCC compiler (PA-RISC and Itanium)
PGCC, cxx and kcc on Linux
There were a couple more OSes detected in the configure script that were
lacking even the mkspec. Those have also been removed.
Of those, only hpuxi-acc and aix-xlc have been tested in the last 9
years, though only with Qt 4 and never tried with C++11 support. IRIX
was last tested over 10 years ago and PA-RISC is definitely not
supported due to its lack of atomic operations.
Support for HP-UXi and AIX is now only possible with GCC (assuming GCC
supports those). Support files for Oracle's Sun Studio compiler are left
behind, but its state is unknown.
Change-Id: I7814054a102a407d876ffffd14b69c796b97c972
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The text member was never filled and thus was not set in onKeyUp.
Change-Id: I0d0094745c385e0942635da643d863868b010c2a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The event's count parameter is used to determine the number of keys
involved in the key event, not the repeat count of the key press.
The desktop windows implementation does not pass the "count" parameter,
so we omit it as well.
The tryShortcutOverride parameter is only used on macOS and thus can be
omitted as well.
Change-Id: Id7554e43cc73ec616f68444e82a38418e622e20a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The QOpenGLWidgetPrivate destructor calls reset(), which accesses
the Q-pointer. Calling Q_Q(Class) while still inside the private
class's destructor is wrong due to the cast in q_func() which is
undefined behavior at that stage.
Here is the UB report:
qopenglwidget.cpp:548:5: runtime error: downcast of address 0x000016d0e200 which does not point to an object of type 'QOpenGLWidget'
0x000016d0e200: note: object is of type 'QObject'
00 00 00 00 10 30 32 0f 00 00 00 00 40 e2 d0 16 00 00 00 00 80 7b 42 0f 00 00 00 00 00 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QObject'
0 QOpenGLWidgetPrivate::reset qopenglwidget.cpp 656 0x607e667
1 QOpenGLWidgetPrivate::~QOpenGLWidgetPrivate qopenglwidget.cpp 570 0x60982ab
2 QOpenGLWidgetPrivate::~QOpenGLWidgetPrivate qopenglwidget.cpp 569 0x6098516
3 QScopedPointerDeleter<QObjectData>::cleanup qscopedpointer.h 54 0xcbf7058
4 QScopedPointer<QObjectData, QScopedPointerDeleter<QObjectData>>::~QScopedPointer qscopedpointer.h 101 0xcbde858
5 QObject::~QObject qobject.cpp 1042 0xcb94792
6 QWidget::~QWidget qwidget.cpp 1701 0x5e173f7
7 QOpenGLWidget::~QOpenGLWidget qopenglwidget.cpp 946 0x608d72b
8 ImagePreviewComponent::~ImagePreviewComponent imagepreviewcomponent.h 16 0x58237b6
9 ImagePreviewComponent::~ImagePreviewComponent imagepreviewcomponent.h 16 0x58238c6
Change-Id: If13932ac657afb9d1358ac82ab911a05e96cfbcd
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
