url is set in qtbase/doc/global which is inherited by the
Qt 5 module qdocconf files.
Change-Id: Ieffa174f598f4a3b8ce8be9bfae7ca9b6981f12b
Reviewed-by: Martin Smith <martin.smith@digia.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
msvc thinks that it's impossible to create a null reference (because
some language lawyer said so) and thus complains about our assert that
checks the reference's validity. work around by not dereferencing the
pointers we already have.
Change-Id: Ife2288d4187860105de12fdebc0e671e0159ace3
Reviewed-by: Tobias Hunger <tobias.hunger@digia.com>
When a relative path was specified as the output then it would be in both
Option::output_dir and Option::output. Therefore in that case
Option::output should be just the filename as Option::output_dir has the
correct path to output to.
Task-number: QTBUG-39460
Change-Id: Idc988e6bad94f34b89660fb5e8d6fa3a39dc623b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the condition is now consistent with that of the target itself (which
means that by setting target.CONFIG=no_dll one can actually suppress
installing the target itself even if it's not a dll, but anyway).
Task-number: QTBUG-39253
Change-Id: Id4684a550a33b463594ab537eaa9e1cbfb61e4ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The original dist target no longer copies files around, but
merely does the final packaging. It depends on a new recursive
distdir target, which handles copying distfiles to the distdir.
[ChangeLog][Tools][qmake] Added 'make dist' target for subdirs
projects (unix only)
Task-number: QTBUG-21910
Change-Id: Ib59139c3fe196caf832d8dcefab484ab91f1f5ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A typo caused qmake to stop output dependency information
added by the depend_command clause.
Task-number: QTBUG-13334
Change-Id: I00fabc87438ce94e80341e6f88aa2e0eaab57e19
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch removes the need for the user to put a dot at the end of the
bundle prefix which makes it's use more consistent and intuitive.
The prefix is based on what Xcode calls the "Company Identifier",
basically "com.digia" plus the product name. Changing that to
"com.digia.prefix-" and the product name to "Foo" results in a bundle
identifier of "com.digia.prefix-.Foo" which is in line with Xcode.
Change-Id: I9b62fc4dee1df51b523ce890a8896ea58ea2c62d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Instead of sometimes ending up inside Content/Resources. The two build
phases PBXCopyFilesBuildPhase and PBXResourcesBuildPhase have different
semantics of where to place the files. For the former we use the root of
the bundle as the destination, and this is how QMAKE_BUNDLE_DATA is
documented and used, as well as how unixmake2.cpp implements it. The
latter on the other hand, always ends up in the resources subdirectory
on OSX.
Task-number: QTBUG-35318
Change-Id: I45bbd0dfe7ea78ae330ecb0c91efa74e1c76c9eb
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The ICON qmake variable is implemented in the Xcode generator through
the ProjectBuilderSources::files() function, where we append the icon
to SOURCES (for some reason). This means we can't exclude non-object
sources when writing out PBXBuildFile entries, as the icon file entry
is referenced later on in the bundle resources phase.
This is a partial revert of 66f6e5b162 which introduced the broken
logic.
Change-Id: I120d2325165a1eefd3961a9162e9e5eb3a576c36
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This injected quite some code on every use of qDebug and friends,
while not giving any measurable performance benefits.
Change-Id: I7b51f99130f18f1252da01e313f7b97c43a5480d
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tweak qmake, add mkspecs for emulator and device, adjust the
manifest template for WP8.1, and add missing icons.
Change-Id: I7a6405fa85297ae4cc8522015274e65fb7a315a6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
If the project has a custom Info.plist assigned to
QMAKE_INFO_PLIST, we should leave it as-is without
scanning and replacing contents inside it. Since we
always copy the file to the build folder at qmake
time, any later attempts to modify the source file
will not have any effect.
A better solution is to just reference the custom
plist directly from the Xcode, without modifying it.
This change will also stop unixmake2 from assigning the
default plist to QMAKE_INFO_PLIST, since we need to
know in the xcode generator if the variable was set in
the project or not.
Task-number: QTBUG-38260
Change-Id: I3c488b2960170c544d94f9db89d3ca95ee290bdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Qmake tried to extract the actual executable part of an
extra compiler's commands and depend_command value and
then "fix" it by replacing the directory separators in
it with their local versions and calling QDir::cleanPath
on it.
This misfeature was implemented incompletely and led to
unexpected results (see the numerous attempts to fix
QTBUG-16372).
The user is responsible for passing a correct command by
calling the shell_quote or shell_escape functions if
necessary.
Change-Id: Ic4bfe9eeb697775cd99c865e7a9d335e63605dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This fixes a warning when loading qmake.pro in Qt Creator on OS X.
Change-Id: Iabd70f2b5b9615d0fb1563081f485e6a4c828823
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A pro file that adds files to QMAKE_BUNDLE_DATA using relative
paths will fail building if doing shadow builds. The reason is
that we look for the files inside the build dir.
This change will make sure we resolve files from the source dir
when not using full paths.
Task-number: QTBUG-37054
Change-Id: Ic1067861097b3b6a640ee862472d728d6188576a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the msys shell expects unix-like paths with drives converted
from d:\ to /d/.
Change-Id: I09e25ed2c868702e5d7d8b9cc8c04cc13410eeff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows the developer to provide a list of languages to the manifest
by listing them in WINRT_MANIFEST.languages. It also allows setting the
default language with WINRT_MANIFEST.default_language.
Task-number: QTBUG-38557
Change-Id: I5cb94c9f45146e3068d0833b9e669dc17dca14b2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
f412f2b5 refactored the platform tool set retrieval, but made the
call too early to choose the right tool set on Windows Phone. This
fixes the call so that it does not depend on the WinPhone member variable,
and also makes it forward-compatible with Windows Phone 8.1.
Task-number: QTBUG-38516
Change-Id: Ide91563f5c7f909c4d1a258adc29af6c94595dc9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Android, there's a limitation set on the names of the libraries
you deploy that they must start with "lib" and end with ".so", so
Android apps will link against and deploy with the unversioned
libQt5FooBar.so libraries. When cross-compiling on Windows however,
due to the lack of symbolic links, the only installed library
used to be the main library target "libQt5FooBar.so.X.Y.Z" (for
version X.Y.Z.) This has been worked around in packaging, but
breaks building add-on modules on top of Qt, and is clearly
wrong.
This patch introduces a new "unversioned_libname" configuration
in qmake which is currently only supported for the Unix makefile
generator and only enabled for Android builds. When it is enabled,
only the unversioned library "libQt5FooBar.so" will be created.
Task-number: QTBUG-38347
Change-Id: Ia8897ca7a23a62e2a526d0e02854899b02eb19dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it needs neither native separators, nor a trailing separator.
the QMAKE_PKGCONFIG_INCDIR default was already ok.
Change-Id: I1048b3870fd3ca09aa76b41aecda7d90402aa64a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
fileFixify must not be called twice on the same file path, since it will
convert an absolute path from the shadow build to an absolute path in
the source dir. The first fileFixify occurs in MakefileGenerator::init,
along with the fixifying of INCLUDEPATH.
Change-Id: I607870573a80eaf834ea5f540bbe1451ec983114
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
To enable windows xp support, we must do two things:
1. linker flag must be /SUBSYSTEM:CONSOLE,5.01 or
/SUBSYSTEM:WINDOWS,5.01. For x64, the version is 5.02.
2. Do not use Windows Kit 8. Win SDK v7.1A is recommended. Prepend the
right include paths and lib paths to INCLUDE and LIB before
building.
The Windows XP target support is enabled by passing "-target xp" to
configure.
Task-number: QTBUG-29939
Change-Id: I84c8439606cc2a9d27d64947702846faa4f1e4a2
Reviewed-by: Lucas Wang <wbsecg1@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In a subsequent commit we will need access to more information of the
project object. This is merely a refactoring.
Change-Id: I40e501d037eb7d0295e1057e7b86e404e88e6ca3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since VS 2012 the linker supports the /MANIFEST:embed option, which can
be used to embed the automatically generated manifest without calling
mt.exe. Using this feature simplifies our generated makefiles, esp. in
the case of incremental linking.
Task-number: QTBUG-37363
Change-Id: I2c2d8d2abf36c1b9e7b41bc15244344aab8f5b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Basically a copy of the inline documentation inside the prf file.
Task-number: QTBUG-37788
Change-Id: Ie6df1597297223be778c748aad525f5521232cb7
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
This is useful for querying environment variables which have
parentheses in their name. Such jewels exist on Windows.
The usual $$(VARNAME) syntax fails for those.
Change-Id: I1d2766cabdc7f637caa9ae6408967685e02f5029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's QT_INSTALL_CONFIGURATION, not QT_INSTALL_SETTINGS.
probably the most useless of all properties, but anyway.
Change-Id: Ia1e739ab4ed59e2bcd3199914caed2b3db9070ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove definition QT_EDITION which was set in configure
since it is not used anywhere anymore.
Change-Id: I5c30ab47c6244fcb07707fd05e11decf2068f6d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Windows SDK 7.1 command prompt sets this value to "WindowsSDK7.1"
through its SetEnv.cmd batch script. The MSVC Express Editions do not
include a 64bit compiler toolchain, but the Windows SDK does, so this
change makes it easier to build qmake projects for x86_64 when using
the Express Editions, by running qmake from the SDK command prompt.
See also:
http://msdn.microsoft.com/en-us/library/9yb4317s%28v=vs.100%29.aspxhttp://msdn.microsoft.com/en-us/library/ff660764%28v=vs.100%29.aspx
Task-number: QTBUG-31185
Change-Id: I49d3e159ed67f64490a3d57c5471d540d76ae13f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When running a amd64 VS shell we must not call the x86_amd64
cross-compiler, because it won't be able to start.
Instead we're calling the native amd64 compiler now.
Change-Id: I6968cde3b24c1938b6e0d82f513e49724455f3cc
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Currently the bundle identifier is build using com.yourcompany +
QMAKE_BUNDLE. This patch adds the handling of
QMAKE_TARGET_BUNDLE_PREFIX to build the bundle prefix.
Task-number: QTBUG-19006
Change-Id: I014279da6dbef393b0df36f6d4995e40ab105316
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
/FS forces the compiler to synchronize pdb file writes.
This option is not needed when building with Visual Studio itself.
Still, qmake needs to know it when parsing the compiler flags.
Task-number: QTBUG-36535
Change-Id: Id5b68c4028844e0b95904e08b5121310a4ff13d6
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This was broken for shadow builds. Adding the output directory to the
manifest file name fixes the problem.
Change-Id: I9e5b47a08f80f7afcfd76e13784fbaec912e50ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
windeployqt is a tool that aids in the deployment of Qt libraries and
other files on Windows. This feature (CONFIG+=windeployqt) adds
automatic invocation of windeployqt for qmake projects as a post-link
action. For Visual Studio projects, windeployqt is added as a custom
target which runs after linking, automatically adding the output as
deployment items.
Task-number: QTBUG-35630
Change-Id: I4cdcb1a7f70cedccb4a4e17be5eb9f5de35a4d66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If VCPROJ_ARCH is not recognized or unset, make "arch" default to x86,
or link won't find the libs.
Change-Id: If2cbda37a80c0fa43e1464775c036cebf10f931a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When MSVC supports ref-qualified members, we need to ensure that
qstring_compat.cpp can see the non-qualified definitions in qstring.h,
which means no precompiled header.
Alternatively, for a bootstrapped build we could not compile
qstring_compat.cpp or #ifndef the functions.
Change-Id: I8ece34503060f0b4b0f8f2df2fb9b0fb1311e269
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This variable works like CLEAN_DEPS, but applies to the distclean target.
Change-Id: Ia30e8932b9acd6529298728dd5d0e038b0208d66
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In release configs qmake sets DebugInformationFormat to None.
If ProgramDataBaseFileName is left unset, then VS 2012 will always
rebuild the complete project. Therefore, qmake now inserts an empty
ProgramDataBaseFileName tag if DebugInformationFormat is None.
Task-number: QTBUG-35570
Change-Id: Ifb91b0bbcf6614621bfe3b12429e2624bd16e77a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VS 2010 doesn't denote "no debug info" as "None" but as empty tag.
This fixes a regression introduced by
7c3efdfb6a.
[ChangeLog][qtbase][qmake] fix VS 2010 project file generation
Task-number: QTBUG-35610
Change-Id: I18ae69a842d0b679a781f8d24c026d422da3a857
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Assume that C and C++ headers found in system paths will not change,
so we don't need to tell Make about them, nor do we need to scan their
contents either.
The previous qmake behavior matched gcc's -M switch; it now matches
the -MM switch:
-M Instead of outputting the result of preprocessing, output a
rule suitable for make describing the dependencies of the
main source file.
-MM Like -M but do not mention header files that are found in
system header directories, nor header files that are
included, directly or indirectly, from such a header.
This goes hand-in-hand with our use of -isystem to pass system paths
to the compiler.
Change-Id: I3346b6da496fe6495ac89c5286d066b343116f0e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Do not include the project file twice or other
.pr? files outside the project tree.
Task-number: QTBUG-21910
Change-Id: I62af842282ccdc5b9099d9227d5395ebe3f0698c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a preparation step for 'make dist' target for subdir projects.
UnixMakefileGenerator needs these variables while extending
writeSubTargets() and writeDefaultVariables() for 'make dist'.
Partial cherry-pick of
https://qt.gitorious.org/qt/jpnurmi-qt/commit/8c4ef19
Task-number: QTBUG-21910
Change-Id: I02a616a98448bc3041ef0f4fd034bfb4c2199e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it leads to pathological cases where the number of loop iterations may
go way beyond the reasonable.
this means that users need to avoid using the = operator in alternative
branches that lead to different sources/subdirectories being included
into the project. this is a bit of a corner case anyway, as people
usually add directly to SOURCES/SUBDIRS.
Task-number: QTCREATORBUG-1595
Change-Id: I7783e318fbc2790f6a853ba4e3f4a12db881feb5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/30bd7fcce1aef974f6af9eaa6532aa1f2b6192d2)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
some qt prfs use this variable, so better set it it to avoid some noise.
Change-Id: I606c88dd7664b1cd8b490d60badd5c6bf80fd1c9
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/e64cc71194cbe283dfe9bd2cd688f01fcdcadf34)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of multiple VS installations, a static variable wasn't
initialized. That led to wrong values in subsequent calls of the
detection function.
[ChangeLog][qtbase][qmake] fix detection for multiple VS installations
Task-number: QTBUG-35530
Change-Id: I3fc23bc99679fff640f39578a7074d16fe923334
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Those libraries are contained in QMAKE_LIBS_CORE and
GetSpecialFolderPath() is present in all supported versions.
Change-Id: Iae40714e0f234625b063aeb50e29fc79c4aaa6ea
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this pretty surprising behavior would interfere with building the
examples from an installed qt tree with qmakes from other qt builds.
.qmake.conf (and .qmake.cache) files provide a possibility to explicitly
"anchor" project roots, so there is no point in having a second, even
more magic way to do it.
Task-number: QTBUG-35485
Change-Id: I8fd4fda67cabafdf55e7a98282dcdfaffb4a405e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This adds the required members to allow setting the SDK version, and uses
them when creating WinRT projects.
Task-number: QTBUG-35328
Change-Id: I500ea77c41e27cbcc850462034c0eba8c5d1f124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When creating a MSVC project file for WinRT/WinPhone, the package
manifest and all referenced icons should be automatically added as
content items.
Task-number: QTBUG-35328
Change-Id: Id7f34388c5ba6746392ddadbb795ef47bef34af6
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Visual Studio will default to generating metadata, even if it is not
written to the vcproj. Since there is no metadata file, the build will
fail. This change keeps a saner default for this option when generating
WinRT project files.
Task-number: QTBUG-35328
Change-Id: Ie693e270ef0b9d9677d53af0c60905f048235bc5
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Some cross-compiling mkspecs may require a different MSVC version than
the one found in the path (or the default version). This change allows
the preferred MSVC version to be selected from the mkspec's MSVC_VER
variable when found.
Task-number: QTBUG-35328
Change-Id: I19e03101e3921dfd5026421aef4630e11b9f131e
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Right now, the sublib targets, if any, show up between clean and
distclean targets. That's silly.
I doubt anyone is using sublib targets anyway, but...
Change-Id: I2beffc69f68fa7626ff4aa4a7cc1169b2c6c69a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
- thread was duplicated
- x86 & ppc are obsolete and don't actually do anything
- incremental was just plain nonsense (it does something entirely
different, and it's better to hide this "feature" from public view)
- resources is basically an implementation detail (it's on by default if
qtcore is used)
Change-Id: I9163af6e8db7988382ccf993d4be280f7faec1f2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
while the dependencies in the manual projects are crappy anyway, it is
still worth to cover the case of the user changing the install paths.
Change-Id: I0a7ca5c8ba660c689d6d7af6b65d878390d6456f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Done-with: Leena Miettinen <riitta-leena.miettinen@digia.com>
Change-Id: I1e031402bc3d857cf29782957e5340e3c82f1ed2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
This is the first step in implementing an in-place conversion of QString
to QByteArray. This requires ref-qualifiers in member functions so we
know that we have an rvalue QString.
Converting from UTF-16 to Latin1 always requires half the memory.
For conversion from UTF-16 to UTF-8, the typical string will also need
the same memory or less: characters from U+0000 to U+007F consume one
fewer byte; characters from U+0080 to U+07FF and from U+10000 to
U+1FFFFF occupy the same space in UTF-8 and UTF-16; it's only the ones
from U+0800 to U+FFFF that consume more space in the UTF-8 string.
For the locale's 8-bit codec, we can't be sure and the code (currently)
needs to go through QTextCodec anyway.
This requires a #define set before #include'ing "qstring.h". However,
since qstring.h is included by the QtCore PCH, we need an extra qmake
compiler without the PCH flags to compile this .cpp.
After this change, the distribution of calls in QtCore, Network, Gui,
and Widgets is as follows:
const & &&
toUtf8 31 (74%) 11 (26%)
toLatin1 79 (77%) 24 (23%)
toLocal8Bit 26 (16%) 138 (84%)
Change-Id: Idd96f9ddb51b989bc59f6da50054dd10c953dd4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The default values for PCH, the -ZW switch, and CharacterSet aren't
ideal for WinRT projects, so adjust these accordingly.
Task-number: QTBUG-35328
Change-Id: I78021d0785fa84e15b1f17264daa599a9418f92e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the respective code was removed in 375edf7
Change-Id: Ie31ef4bc8970b5396f50f1c4963f378df816242a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise the 'Wrapper' destination of the PBXCopyFilesBuildPhase
will be empty, and the files end up outside of the application
bundle.
Task-number: QTBUG-34457
Change-Id: I799db28185a6c5d3d940602914fd8ba14c538bf2
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Link to "Getting started with qmake" was invalid
Task-number: QTBUG-34749
Change-Id: I782dc99f5182f2fe7661377eb82f35ebb50a46cf
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
let the compiler use qmake.pdb, as the linker will.
Change-Id: Ifafdfeff5a7d0ea91d796f76fbdc018c87cf8b78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids the nasty and conflicting vcXX0.pdb files in the build dirs.
VS will already do that.
Change-Id: I7bddaecf3f478edc78cd6654b5a1038db4fe04ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the restriction to dlls is entirely unjustified.
Change-Id: Ia518dd16189572dea9e8f4280c88801b1393694e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this option suppresses the installation of target (leaving only
dlltarget). however, it still installed target's pdb file.
Change-Id: Ia686a647c101ca66e74944d23171e120fc74515a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
QString::replace() has no way of escaping capture group references,
so simply disarm double backslashes. of course this is broken, but
we'd need to reimplement it from scratch to fix it properly. "corner
case" ...
Change-Id: I357fbfd22c9c4a68809e5af6efad1de3a95706b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In XCode only the pro file was shown in the Supporting Files group as
it was the first one in the list. The others were not shown as it was
recreating the temporary QStringList each time instead of appending to
it.
Change-Id: Ifbc40a25156cf639eaa34b410f534726c41b6232
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Starting with MSVC2013, a separate set of libs for Windows Store apps is
supplied, so make sure it is in the LIBPATH (and before the desktop libs).
Change-Id: I74f3f385c2db749010fbfe7e2d4c3d1228e4e603
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
unlike .qmake.cache & co., the presence of this file has no magic
effects on where mkspecs, modules and other things are searched.
as the obvious name "cache" is of course already taken, we call it
"stash".
the file is searched up to the super cache (if present), otherwise up to
the normal cache/conf (if present), otherwise up to the root.
if it's not found, it is created next to the super cache (if present),
otherwise next to the cache/conf (if present), otherwise in the current
output directory.
note that the cache really should be created and populated by the
top-level project if there are subprojects: otherwise, if there is an
"anchor" (super/cache/conf), subprojects would race for updating the
cache and make a mess. without an "anchor", each subproject would just
create its own cache, kind of defeating its purpose. this is no
different from the existing "cache", but it's worth mentioning that
removing the "anchoring" function does not remove the "nesting order"
constraint.
Task-number: QTBUG-31340
Change-Id: I786d40cef40d14582a0dd4a9407863001bec4c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise, if the output dir is the root, the path would be denormalized.
the code for finding existing files already does that.
Change-Id: I56d70477e9c9ffcd936325068624a84df10ffd87
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In 5.2, the HTML output is in a flatter structure and when they are
hosted in qt-project.org/doc, the documentation will be found at
http://qt-project.org/doc/qt-$QT_VER
The url variable is used by projects outside of Qt 5 which need
to link to Qt 5 documentation, such as Qt Creator.
Task-number: QTBUG-34584
Change-Id: Ifa55fcd9e402b0e184a41e316340e46aeb7101de
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
there is no point in setting the variables already when peeking into
the caches, as that is done in a separate evaluator anyway.
it also makes no sense to have them set while loading the spec itself,
as it's not permitted to do anything with the caches.
so set them at the next convenient point, which is right before actually
loading the caches.
Change-Id: I3717ddf94353dc04e12c52e542f16ed27b578e14
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Warn the user if QMAKE_INFO_PLIST is set, but file not found.
An iOS application will not run or deploy without an
Info.plist present, and the error message given by
xcodebuild is not very informative.
Change-Id: I54f0e06de320a43c9f3261fe88761c41e3ccd022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Xcode resolves dependencies at the beginning of each target, so if a
Qt preprocessor such as moc or rcc updates a cpp file Xcode will not
rebuild the cpp file until the next build.
We solve this by moving the Qt proceprocesor handling to a separate
aggregate build tool target, which the main application target then
depends on.
Change-Id: I8f9225b9603dc5f279b1cb60976fe709bd97963e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Allows the macx-xcode mkspec to be a wrapper around other mkspecs.
Since QMAKESPEC can now be set in the spec, we have to ensure not
to append to QMAKESPEC.
Change-Id: Idf33ff38147f14c488f14b426c02d9a739fdaecf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Exclusive builds uses setExtraConfigs to apply the particular CONFIG
of each build pass. Unfortunately we were not applying these extra
configs early enough in QMakeEvaluator::visitProFile() for them to
be picked up/usable by default_pre, something that can be useful.
Change-Id: I423a4688250a15f0c1a2cc65a48f0bbc14ad4497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The extra variables only need to be applied once, when we
are loading the pro file (and hence are loding pre files),
not for every single pri/prf that's loaded as a result of that
(which do not load pre files themselves).
Change-Id: I3118694a8eeccf2dc32c4f62df754033fad13528
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It has no effect when the compiler doesn't support it.
Task-number: QTBUG-33952
Change-Id: I23b1fcdf4ec31924b1b59987846f7e0fbf17c6c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to have scoped variables such as eg FOO[arch=armv7].
We could quote all variables, but Xcode doesn't, and we try to stay
close to the native behavior.
Change-Id: Ia6634a33e42031fe7e69c4f680803fa347e5de4a
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
ARGS already exists, but is a flattened list of the arguments, so both
foo(bar, baz) and foo(bar baz) will give count(ARGS, 2), making it
unreliable for validating arguments to qmake functions.
Change-Id: I0bcc16614c64000169431327da48fd1a26708e67
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Platform specific qmakespec needs to enable: autogen_wmappmanifest and winphone. Manifest will be generated once and only for the application template.
The Manifest will generated from following variables:
* PRODUCTID - the GUID (application specific)
* PUBLISHERID - GUID (publisher specific)
* TARGET - short application name (executable)
* AUTHOR
* PUBLISHER
* DESCRIPTION - application description
Change-Id: I225c24dc256c57451775e37658080e88b842a7d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The user needs to specify the DEPLOYMENT variable. The syntax
is the same as previously used for DEPLOYMENT. For more info
please refer to the qmake documentation. The change adds
a new itemgroup, "Deployment Files". All files in this
itemgroup are marked as DeploymentContent and are then
packaged with the application either as XAP or the WinRT
specific file format.
Change-Id: Icf85887287c1c97eb782704340eaa3f8dde6719e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In order to be able to use the linker's /WINMD
and /WINMDFILE options
Change-Id: I2673e20aa073c6b807e8c9f191fd408c7976efc4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The change adds a new ItemGroup with a single library reference:
platform.winmd.
Change-Id: I0c7f4c46654b520afb79b6c6f49b5f2d1af400d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It's a generic way to configure the Visual Studio Solution
architecture. It's added to support different project
architectures, ARM specifically. It may be a good idea
to replace the Win32 and x64 with VCPROJ_ARCH=Win32
and VCPROJ_ARCH=x64 defined in corresponding qmakespecs.
Change-Id: I9b23f7393bf248a629c425187d6dd8859092c45c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmakespec for either WinRT or WinPhone have to specify
QMAKE_PLATFORM with winrt and/or winphone.
Change-Id: I87e0063881e6edd65de14adb006949247ce49904
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Xcode generator relies on the generic makefile generator for extra
compilers such as qrc and moc, by generating makefiles that are then
executed as separate build steps in the Xcode build.
These makefiles are generated by entering a special mode in the Xcode
generator, in which case we _do_ want to resolve dependencies, so that
e.g. the files referenced inside a qrc file are added as dependencies
to the makefile rule that generates the qrc-cpp file.
Change-Id: I96bdcb165e9774a6328ae1980986fa2c6b00c6d9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
qmake manual needs to be able to link to pages in qtdoc module,
for example, to information about Third Party Libraries.
Change-Id: I6ccaa0c3aecc54bd5d76c6b1573c797423048207
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When building a project in VS then it would cause a rebuild
under certain situations even though a rebuild is not
actually required.
The root problem exists in VS in the following configuration:
1. A file has a custom build tool specified
2. The custom build tool has additional dependencies
3. The input file is specified in the additional dependencies
4. There are files in the additional dependency list
This is the situation with form files in Qt that have include hints
specified in Qt Designer. The include hints get specified in the
additional dependencies for the custom build tool.
What happens is that VS will process files in the additional
dependency list differently based on where they appear in the list
relative to the input file.
If a dependency appears before the input file, VS will require the
file as a build input. If you just specify a file name, VS looks in
the project directory (and only the project directory) for that file.
You have to specify the path (relative or absolute) to get VS to look
elsewhere. If VS does not find the dependency, VS thinks the project
is out of date (since the missing dependency is a required build
input) and will rebuild the input file.
If the dependency appears after the input file and the file doesn't
exist, VS does not include the dependency as a build input. Since the
file is not a build input, no rebuild is required.
Change-Id: I5af460d21ad049ed7819746fd60c98677b810692
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up; this doesn't actually do anything in qmake.
if we end up calling cache() from within the initialization of the base
context, we cannot wait for for the completion of that initialization
before we proceed, obviously.
Change-Id: If30c6f3665fe423e767373a8821c406b2f5e0eca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/b64b4431c20afd9e39c1463e736f998ef450688f)
sync up; this doesn't actually do anything in qmake.
as we modify the environment, it must be properly locked.
this implies that initFrom() also needs to be called with a lock.
Task-number: QTCREATORBUG-9835
Change-Id: I48bae9af9adaa0518e5a9db0ba08ff057ae14f9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/d022a2d19cecb00397c2a215fc4e3bf64b1e627b)
sync up; this doesn't actually do anything in qmake.
creator's file watcher can trigger many parallel, entirely
non-hierarchical project reloads. if there is enough of them to exceed
the thread pool size, some will be serialized already by qtconcurrent,
not by our wait condition. these should notice a faulty spec, too.
Change-Id: I8ce40cb90fbc28045127881d57ec94e125df79af
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/759d0a69dd3973b4785b6f9412f46666a05cdf85)
You can specify a relative path to a .pro file in any directory.
Fixed a capitalization issue and a grammar issue and changed the
visible text in a link target.
Task-number: QTBUG-14139
Change-Id: Ib476bd400c46645709950c582492edcaaba9d7ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
That's not been in use for quite a while.
Change-Id: If5a18a54d32f330fe37655516d4b83e5d3d30afc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>