It's just the setUnixErrorString() functions.
Change-Id: I12a088d1ae424825abd3fffd171d2880ebaf49c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Into separate classes. This temporarily compiles QSharedMemoryPosix
on most Unix systems despite defaulting to SystemV.
Change-Id: I12a088d1ae424825abd3fffd171d25efdee8d2de
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Into separate classes. This temporarily compiles QSystemSemaphorePosix
on most Unix systems despite defaulting to SystemV.
Change-Id: I12a088d1ae424825abd3fffd171d23191fbb6db3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The two features are independent of one another. This also exports them
to qtcore-config_p.h, but leaves the QT_POSIX_IPC macro from
qtcore-config.h alone. Those four are also included on Windows builds,
so we won't need to #if them out of Windows.
Change-Id: I12a088d1ae424825abd3fffd171d1f0ae8e8f469
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This removes the second portion of the #if mess of shared code between
QSharedMemory and QSystemSemaphore for SystemV.
Change-Id: Id8d5e3999fe94b03acc1fffd171c073c2873206e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
So we don't have to mess around with #ifs to support the build.
Drive-by replace with unlink() some calls to QFile::remove(), which
create a QFSFileEngine, to call QFSFileEngine::remove, which calls
QFileSystemEngine::removeFile. Since we've just created the file with
qt_safe_open(), we may as well use the low-level Unix function to remove
too.
Change-Id: Id8d5e3999fe94b03acc1fffd171c06c7efc0b0f0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not a lot of files, but it's actually more in the same dir than
mime/ does right now. I'm about to add two more files, though I'll also
merge a few more later.
Change-Id: Id8d5e3999fe94b03acc1fffd171bfe2ea36a35a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QWidgetTextControlPrivate::mouseReleaseEvent() has early returns
implemented, e.g. when link has been right clicked or no selection
anchor has been found. These early returns, however, still consume
the event.
This leads to events getting lost instead of getting propagated:
As an example, a QLabel with rich text uses QWidgetTextControl. While
it propagates mouse press events back to its parent, mouse release
events get lost. A QLabel with plain text propagates both events
back correctly.
This patch adds QEvent::ignore() to the early return.
Since no test class exists for QWidgetTextControl, it adds a test in
tst_QLabel.
Fixes: QTBUG-110055
Pick-to: 6.5 6.4
Change-Id: I950f8c3f135793b01c59832835bb429db2282169
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The code is now unused as svg graphics have been introduced for
window decorations.
Change-Id: Iefe4543af2483fd9ff3eb6ce15b9905620927a9b
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
As we are now processing the arguments with
cmake_parse_arguments(PARSE_ARGV, we don't need to pass the escape
characters anymore.
Task-number: QTBUG-99238
Change-Id: Iea9cda4fe0ae56043cc4d7db29ce53d9d737d645
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
AUTOUIC doesn't handle relative paths to .ui files in parent
directories when using Ninja Multi-Config.
The designer tool in qttools has such a ui file. This leads to the
following error when trying to build qttools together with examples as
ExternalProjects and Ninja Multi-Config:
ninja: error: 'src/designer/src/designer/designer_autogen/
include_Debug/ui_preferencesdialog.h', needed by
'src/designer/src/designer/designer_autogen:Debug',
missing and no known rule to make it
Until cmake is fixed, we can work around the issue by not adding
designer as a dependency when building EP examples, because no example
tries to use the app.
We can't exclude all apps from example dependencies because some
modules use qt_internal_add_app for tools as well, which are called
from public CMake API and also examples.
An example of this is qtapplicationmanager.
Given that we can't exclude all apps, introduce a function to
allow skipping single targets when building EP examples.
This will allow excluding designer specifically.
The examples will now depend on a new ${repo}_src_for_examples target
rather than ${repo}_src, which will exclude skipped targets.
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Task-number: QTBUG-110369
Change-Id: I2f900253bbf7bac917f2293ef604ab3ea8f298e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Drop events are now handled in the wasm window element, which allows
the browser to select the drop target automatically. This also fixes
the case where drop data transfer finishes reading when a window
has already been closed and destroyed - the cancellation flag is now
owned by window so it gets invalidated as soon as window is gone.
The code has also been structured with a new DragEvent passthrough.
Fixes: QTBUG-109581
Change-Id: Ie3eb7446e2181fd540517f39397e8b35f111d009
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
These methods don't seem to be used by anyone now, but not sure
how it was before, so to not run into any BiC issues, just add
a comment to remove them in Qt 7.
Change-Id: Ie30a3d2adcbbb7530d9cf72f03b78ecfa06e426c
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The 'WITH OIDS' was deprecated some time ago and removed with
PostgreSQL 12 so we have to adjust our test table creations. Don't know
why it was used in the first place at all.
Pick-to: 6.2 6.4 6.5
Change-Id: I6e18ac01e64368b1dd64e02bcb75fa70e05467a3
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The growBy() function takes the _increment_ of the size(), so needs to
add size() to increment for the call to realloc().
Add a test which hangs (vanilla build) or explodes (valgrind build)
without the fix.
Amends 26b227e128.
Done-with: Eirik Aavitsland <eirik.aavitsland@qt.io>
Pick-to: 6.5 6.4
Fixes: QTBUG-110412
Change-Id: I7ea91342fdcb779825c88013a3f86ba6d90ef530
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
various fixes like missing includes, linking, obsolete API usage, etc.
Pick-to: 6.5
Change-Id: I786bff396933b87cd39559ac8964d386ef368df1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This makes the exceptions prints tagged with the app's name/tag,
and also can allow QTest::ignoreMessage() to handle exceptions as now
it cannot filter messages out because they're printed by the Android
system.
Pick-to: 6.5
Change-Id: I9f5132b9ec5b5cd8fb35707eaaf68aa517f417ec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some public functions are still using int instead qsizetype which
can't be changed until Qt7.
Change-Id: Ib6f210c344acce9f3836e8a5493a741eb8b2b385
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Thanks to Ahmad for noting.
Amends 6bc227a06a.
Pick-to: 6.5
Change-Id: Ie6191bfc21d69f88a9a135f0d5f6b4fa8b09e8ad
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It wasn't added when this class was created in 5.0 because we couldn't
add move constructors and still keep the ability to compile Qt with
C++98 compilers. We've forgot to correct this shortcoming since 5.6.
Fixes: QTBUG-109842
Pick-to: 6.5
Change-Id: I69ecc04064514f939896fffd17376b8243b73c52
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If an object had elements and then was emptied, it will have a non-null
d pointer, which wasn't taken into account in the comparison.
Fixes: QTBUG-109840
Pick-to: 6.5 6.4 6.2
Change-Id: I69ecc04064514f939896fffd17376aa18184653c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
range_access.h:274:5: error: inlining failed in call to ‘always_inline’
‘constexpr std::size_t std::size(const _Tp (&)[_Nm]) noexcept [with _Tp
= short unsigned int; long unsigned int _Nm = 34]’: target specific
option mismatch
qsimd.cpp:367:35: note: called from here
Pick-to: 6.5
Change-Id: Ide4dbd0777a44ed0870efffd1739097c71991822
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Passing a NumberMode lets it exclude floating-specific details for
integer parsing. For now this is only partially exploited, but later
work shall make more use of it.
Fixes: QTBUG-81756
Change-Id: If11d3a5a122d0714f645e58a51ee0d0c47ebe61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's always a constexpr (or static const that could be constexpr; fix
the cases of this while I'm here) or an integer literal, so we can, so
we might as well.
Change-Id: I61e9bcdb27f4a05f011ccce16b5f15d0dade0782
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
In addition to the fix, I've removed some legacy codes in the
`configure` file and delegated most of the work to
the `QtWriteArgsFile.cmake` which was being used by `configure.bat`. I
am not sure how this was supposed to work before since it was not really
working, but now, `config.opt` lives in the build directory, together
with `config.opt.in` (a template file), and the `config.redo` (and
`config.redo.in`) which holds the full redo command. The template files
are being used to preserve the quoted variables and to help
QtWriteArgFiles process the opt files more consistency.
Also fixed an issue on Unix, where ./configure was failing to run if
its path contained spaces, e.g., `Qt Src/qt5/configure`.
Fixes: QTBUG-108287
Change-Id: I9843b690a1fd3177a93e55e08a3484a4c85ba2e8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use a stack buffer, and perform the recoding from L1 to U8 in chunks.
Solves the L1 case of
Task-number: QTBUG-109284
Pick-to: 6.5
Change-Id: Ia9ac7d8b27fd452d24d9e27f0575f9fc83b6dcbc
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add TARGET instruction in property setter, used in debug mode on macOS.
Task-number: QTBUG-107842
Task-number: QTBUG-109227
Change-Id: I8704b7009c36ea8ddbf8773abfaf2b5f34f728ac
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We wasting time and resources by signing binaries that
are for internal use only.
Change-Id: Ic3271af7f11dac05979ff14a7ffa3f9075fe0ecb
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
This reverts commit 6a18bc8090.
Reason for revert: The reason for the original revert has been fixed
in c146d25a87.
Change-Id: I996960633dc75a7ef3ae12ab7f759658af7932c5
Reviewed-by: Xavier BESSON <developer@xavi-b.fr>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Any QHttp1Configuration object created has 'ShortData data' as active
member. std::exchange()ing or qt_ptr_swap()ping 'Private *d', then, is
accessing the inactive member of the union, and that's UB.
Fix by swapping and copying the whole union, as opposed to any of its
members, and, in the move constructor, activating Private *d.
This is now safe, as assigning to 'd' ends 'data's life-time and
starts 'd's. Even if we assign a well-formed object to a moved-from
object, we either swap or copy the whole union, so SEP. For
self-move-assignment in the moved-from state (Hinnant Criterion),
we're using std::swap() on the whole union, so SEP.
In addition, activating `Private *d` in moved-from objects means that
a future ~Public's use of unconditional 'delete d' won't invoke UB,
either.
Thanks to Peppe for insisting on fixing this.
Pick-to: 6.5
Change-Id: Ic1323b8416d6b17ae21768c625de1daba0944133
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The move-constructors for QTimeZone and QTimeZone::Data are trivial so
can be inlined. Requested by Marc Mutz in 6.5 API review.
Pick-to: 6.5
Change-Id: Id59dc95e0da061187d9db8cf0a5ab82fcece1694
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The {CF,NS}TimeZone declarations are only used when backends are in play.
Pick-to: 6.5
Change-Id: I17fd3fc90ce96f35bcb8f81b862cc5d3752e37e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This alone isn't enough:
Feature "xcb": Forcing to "ON" breaks its condition:
QT_FEATURE_thread AND TARGET XCB::XCB AND TEST_xcb_syslibs AND QT_FEATURE_xkbcommon_x11
Condition values dump:
QT_FEATURE_thread = "ON"
TARGET XCB::XCB found
TEST_xcb_syslibs = "FALSE"
QT_FEATURE_xkbcommon_x11 not evaluated
But when it says:
-- Performing Test XCB (extensions) - Failed because XCB::CURSOR not found
The user can know what to do.
Pick-to: 6.4
Change-Id: I810d70e579eb4e2c8e45fffd1719c0abf608ed30
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Removed some unused includes in the sql sources
Change-Id: Ifbe1df401e0f4042650f8ce9902cb9977d2aa484
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The field is never set and thus never used meaningfully.
Change-Id: Ia45afa6339d38316d76766a736ba8cb1ce9f58fa
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This code is completely unused at this point.
Change-Id: Id0ecd0125e59b08904ae722ad4319c5ff15620a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A few things:
- Improved the documentation by adding a CMake section, briefly
describing the process of adding the plugin, and placing it where it
should be.
- Write a note about the case where the style may be overwritten at
launch, and how to set the a new style using a CLI
- Improved the CMake build such that it creates the App Bundle
correctly, and also works without an App Bundle as well.
- Changed the example, and plugin such that now instead of a QPushButton
we have a QTextEdit, and change the text color.
- Replaced the application screenshot
Fixes: QTBUG-107842
Fixes: QTBUG-109227
Change-Id: I161a91b27df016ff6230fac3871b79d2dfbdf18a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It doesn't seem like that it is being used anymore, except an instance
in pro2cmake which I replaced by NO_GENERATE_METATYPES.
Pick-to: 6.5
Change-Id: I135cf47e6041e98b354fb684f0079dad30689dea
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This replaces the qt_parse_all_arguments macro with the built-in
`cmake_parse_arguments(PARSE_ARGV`. In addition, a new function,
_qt_internal_validate_all_args_are_parsed, can be used to check whether
any _UNPARSED_ARGUMENTS have been passed to the function.
Fixes: QTBUG-99238
Change-Id: I8cee83dc92dc6acdaaf747ea6ff9084c11dc649b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This overridden function is not used and also can't be triggered by a
synthetic input event in an auto test.
Change-Id: Id8b69b440a90c18cf5870e34804fae3e6607e49f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
