This fixes a bug where app build would fail with AssertionError: SIMD is
used, but not supported in WASM mode yet
Change-Id: I27d5eb00b2c869b890dc519a7a793b7f87aeb9d2
Fixes: QTBUG-73795
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
make it "last one wins", consistently with regular libraries. this
isn't really relevant in qmake, because the order matters only for
static frameworks, which qmake defines out of existence.
note that specifying frameworks by full path does not work, so we
don't need to amend 9d76beee5 in that regard.
Change-Id: Ib027109339e1b5973c577d69906b6daf83ba9611
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Without this include, __REDIRECT does not get defined, and then
open gets #defined to open64, leading to bogus MOC output.
See https://bugs.debian.org/920613.
Change-Id: I629d9dc6af05b9480c0c81a61d8890ab8bbefaae
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since Windows 10 update 1809 it is possible to install fonts as a user
so they are only available for use by the user and not on the system.
So this location in the registry needs to be checked as well when
looking for available fonts.
Fixes: QTBUG-73241
Change-Id: I5d808e38b80dde8189fe8c549a6524bd559e30c7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The bcm_host library couldn't be detected anymore. Let the makespec
provide LIBDIR, INCDIR and LIBS for bcm_host to fix this.
Change-Id: I4bc268504dc48edaf2884f1c14b745260fd9112c
Fixes: QTBUG-73727
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
IoUtils::isRelativePath() didn't attempt to consider UNC paths, due to
a belief that qmake fails on them so badly that it wasn't worth the
extra code. However, it turns out Qt Creator's copy of this code does
need to take this into account, so start the change off in qmake's
version so as to keep in sync.
Task-number: QTCREATORBUG-21881
Change-Id: I3084b87c1d3ca6508255e94e04ac8db3ceaebb7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As winrt does not have native windows, exposure check was just done by
checking, whether the window is the active window. If a window is shown
fullscreen though, winrtscreen will be resized. This resize triggers a
resize of every maximized or fullscreen window that is shown.
If we enter or leave full screen mode, we have to wait until the screen
resize and the subsequent window resizes are done and only then we can
consider the windows properly exposed.
This patch reverts 54bcb9d42f and thus
unblacklists tst_QGraphicsItem::cursor on WinRT.
Fixes: QTBUG-73545
Change-Id: If469fce319ed6b3a5d56b7bf3cbc11929b72bb11
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Change-Id: I963fc1c159edc644f081675c3dee248c25d7c9dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
We were interpreting bit #8 as the oblique bit, but this is the
WWS-conformity bit. Bit #10 is the oblique bit.
[ChangeLog][Windows] Fixed an issue where loading fonts from files or data
would sometimes mistakenly classify them as oblique.
Fixes: QTBUG-73660
Change-Id: Id9e5012d1b89d0bee0e966c5105657b38834e13a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QMake ignored every extra compiler that sets variable_out and whose
output does not have a builtin compiler (C++, C).
What the code wants to achieve is to ignore extra compilers that put
their output into variables that are handled "somewhere else already",
e.g. are in the otherFilters list. Evidence for that is to be found in
the addOnInput == true if branch.
Task-number: QTBUG-71283
Change-Id: I8c1d76febccacb450cd14ad7a1f4b87726832312
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Some platform backing stores may require that the window has been
created, so let's defer the platform backingstore creation until
absolutely necessary.
Change-Id: Ib93151c6473e3bbe77d994782d84289c2f63bcf2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Printing pools by calling [NSAutoreleasePool showPools] will now give
a more detailed view of where the various pools in the stack were
created, eg:
AUTORELEASE POOLS for thread 0x1000be5c0
17 releases pending.
[0x107802000] ................ PAGE (hot) (cold)
[0x107802038] ################ POOL 0x107802038
[0x107802040] 0x107791c70 ^-- allocated in function: main
[0x107802048] ################ POOL 0x107802048
[0x107802050] 0x1073b2e80 ^-- allocated in function: QCocoaWindow::initialize()
[0x107802058] 0x107111ed0 NSCompositeAppearance
[0x107802060] 0x107111ed0 NSCompositeAppearance
[0x107802068] 0x107111ed0 NSCompositeAppearance
[0x107802070] 0x1073bbe10 __NSCFString
[0x107802078] 0x1073bbde0 _NSViewBackingLayer
[0x107802080] 0x1073bc100 NSWeakObjectValue
[0x107802088] 0x1073bbe40 QNSView
[0x107802090] 0x1073bbe40 QNSView
[0x107802098] 0x107111ed0 NSCompositeAppearance
[0x1078020a0] 0x107111ed0 NSCompositeAppearance
[0x1078020a8] 0x1073bbe40 QNSView
[0x1078020b0] ################ POOL 0x1078020b0
[0x1078020b8] 0x1073bbe30 ^-- allocated in function: QCocoaWindow::recreateWindowIfNeeded()
Change-Id: I97faf30db5835fea2f05320435b1b8c334a478d1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Prevent automatic insertion of line-breaks in blocks formatted with 'white-space:nowrap'.
This follows the example of white-space:pre.
Fixes: QTBUG-54787
Change-Id: If26f6a54106a02fe0e388947f6368ae4e86acf63
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Checking the application's keyWindow will autorelease the window, and
there's no root pool in place when called from the display-link thread.
Change-Id: Ic43164ad6397c92b858fb549f7a00e28b6110849
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This change reverts to using legacy mouse messages when handling mouse
and touchpad input, while using pointer messages to handle touchscreen
and pen input. The use of pointer messages to handle everything, added
in 5.12.0, caused issues in some particular cases, due mainly to
differences in behavior or bugs in the pointer messages, which required
workarounds in the Windows QPA, which didn't work well in all cases and
led to additional issues. For instance, DoDragDrop() does not work when
called by pointer (or touch/pen) handlers, but only after OS-synthesized
legacy mouse messages are generated. Also, in some cases pointer messages
for mouse movement are generated as non-client for client area events.
Modal loops like the ones in window resize/move and menu handling caused
some issues with pointer messages, as well. Also, we have to handle the
OS-synthesized legacy mouse message generated for touch and pen. Ignoring
them while letting the gui layer synthesize mouse events for touch/pen
may break Drag and Drop by triggering DoDragDrop() before legacy messages,
which can result in a hang inside the DoDragDrop() modal loop. This change
should fix most regressions related to pointer messages, while keeping
the enhancements in pen and touch input.
Fixes: QTBUG-73389
Fixes: QTBUG-72624
Fixes: QTBUG-72801
Fixes: QTBUG-73290
Fixes: QTBUG-72458
Fixes: QTBUG-73358
Fixes: QTBUG-72992
Change-Id: I919f78930d3965270ef2094401e827ab87174979
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some QSpinBox tests start failing after reverting to using legacy mouse
messages to handle mouse input in the Windows QPA. It seems to be caused
by a test that runs before it and moves the mouse cursor. Then when the
QSpinBox tests run, they create widgets that appear below the mouse
cursor, causing some mouse events to be generating and messing with the
events synthesized by the test itself. With the pointer messages being
used for mouse input, the legacy mouse messages that are generated under
this condition were being ignored. But by reverting to the old
implementation, the legacy messages are handled again, causing the test
to fail. This change moves the mouse pointer to a safe position during
the test initialization, so it does not depend on the state left by
previous tests. This change needs to be integrated together or before
the change in the windows QPA.
Change-Id: I91f7e9376dc495ee61250e0a7d908c1c2b685bc8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It was needed as a workaround for the window border and window content
becoming out of sync when we were drawing and flushing to the layer
from another thread using OpenGL. Since we've disabled ThreadedOpenGL
we can remove this workaround for now.
The workaround also had other problems, as windowWillResize: did not
turn out to be a reliable signal to know when a window was about to
resize. Since we override windowWillUseStandardFrame:, we would not
get the callback when zooming windows. Conversely, if we removed the
windowWillUseStandardFrame: override, we would get a single callback
for windowWillResize:, and then multiple callbacks that the window
had resized. In addition, windowWillResize: is not only used as a
callback, but also as a way to let the window delegate restrict the
size, so it's called when e.g. AppKit determines the standard frame
of the window -- an operation that doesn't involve an actual resize
operation.
If we re-introduce a workaround using screen-update disabling we need
a better hook than windowWillResize:, and we need to track when we
disable screen updates so that we can pair them up with corresponding
screen update enables, otherwise we'll get log messages in the console
about "SLSReenableUpdate: unbalanced enable/disable update".
Change-Id: Ifca8892083c8666976391a4ada8f8d1471493943
Fixes: QTBUG-73726
Task-number: QTBUG-69321
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The display-link callback comes in on a secondary thread, so there's a possible
race in using QGuiApplication::instance() to check whether or not we're on the
main thread.
Change-Id: Ic26bca8f5f54847a1e1b11dc92e786693c86e9de
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The API is often called from main before entering the event loop,
and the making the window first responder and key will autorelease
both the window and view.
Change-Id: Ie2a7dc14652015cbe802b57696e4a82d564e2dc0
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since include paths are fully resolved, we must remove the code that prepends
the SDK path to the OpenGL include paths.
Change-Id: I80d74629c7fc989a89c3f1d95d6de43b4c1de17a
Fixes: QTBUG-73736
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Calling QWindow::setVisible doesn't have the same semantics, so we
split off QWidget::setVisible into QWidgetPrivate::setVisible and
call that instead from QWidgetWindow.
Task-number QTBUG-67504
Change-Id: Ie50938d4a1d33ad4b59c742e75e3ca30f1b19399
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For some reason, QCalendarWidget gets filtered press events that were
intended for Qt Virtual Keyboard's input panel (QQuickView), so we have
to make sure that the window is indeed a QWidget - no static_cast.
Change-Id: Ibc9dce956918ac50d1fed8231a445b7338aef09c
Fixes: QTBUG-72925
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use xilink for ICC and lld-link for Clang.
Change-Id: I13c74339ae9e3e5c97210afd20a53c7e474b873b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Top level windows already get their geometry changes via windowDidMove
and windowDidResize.
Change-Id: Ie6370aa290ef48c8b3ac770e77adb57ce43cbb47
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't need to react to updateTrackingAreas, as we only have a
single tracking area that we can add once and forget. By asking
AppKit to track all events in the visible rect, we can also pass
a zero-rect for the tracking area.
Change-Id: I2545712adc49b51904d5adc11f1faca36901b49d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Core Text doesn't actually have a concept of DPI internally, as it
doesn't rasterize anything by itself, it just generates vector paths
that get passed along to Core Graphics.
In practice this means Core Text operates in the classical macOS
logical DPI of 72, with one typographic point corresponding to one
point in the Core Graphics coordinate system, which for a normal
bitmap context then corresponds to one pixel -- or two pixels for
a "retina" context with a 2x scale transform.
Scaling the font point sizes given to HarfBuzz to an assumed DPI
of 96 is problematic with this in mind, as fonts with optical
features such as 'trak' tables for tracking, or color glyphs,
will then base the metrics off of the wrong point size compared
to what the client asked for.
This in turn causes mismatches between the metrics of the shaped
text and the actual rasterization, which doesn't include the 72
to 96 DPI scaling.
If a 96 DPI is needed, such as on the Web, the scaling should be
done outside of HarfBuzz, allowing the client to keep the DPI of
the shaping in sync with the rasterization.
The recommended way to do that is by scaling the font point size,
not by applying a transform to the target Core Graphics context,
to let Core Text choose the right optical features of the target
point size, as described in WWDC 2015 session 804:
https://developer.apple.com/videos/play/wwdc2015/804/
GitHub-PR: https://github.com/harfbuzz/harfbuzz/pull/1484
Change-Id: I830f0cd7a82552422bbe09226e2d571e246fe3f4
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Remove wrong code changing the Bido level of line separators. This
lead to wrong ordering of the string in case the line separator was
meant to be ignored and the string should be rendered in one line. Line
breaks are anyways already reset to the paragraph level by the algorithm
and reordering is done on a line by line basis, so this will work
correctly when doing proper line breaking.
Secondly fix a small bug found while testing the above change, where
we wouldn't set the correct levels for boundary neutrals and explicit
embedding chars because we did that processing before we were fully
done with the BiDi algorithm.
Change-Id: Id88f91cd58d2ab29be864aef34ca1727c1586611
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The algorithm has been treating DirB inconsistently so far.
initScriptAnalysisAndIsolatePairs was treating it differently
than generateDireationalRuns leading to assertions.
It wasn't visible in our test data, as DirB is in almost all cases the
paragraph separator, where we split strings anyway.
Change-Id: I7dc0e7bbcf30ee84d8781ea06097da023e371f05
Fixes: QTBUG-73238
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timeout will never be larger than numeric_limits<quint64>::max(),
especially on platforms with 32-bit longs.
Instead, test if the timeout is exactly numeric_limits<unsigned long>::max(),
which matches the ULONG_MAX value which is documented
to indicate no timeout.
Change-Id: Ib663eddb5703797c50c04fd4eae60bd64f379d1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
WINAPI_PARTITION_PHONE_APP is defined for all our winrt mkspecs nowadays
so the code can be used unconditionally.
Change-Id: I4f2b60a0b9bba5b407ebbc213c44a0e5b4057855
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Our bundled ANGLE library only partially supports OpenGL ES > 3.0 so warn
users that there might be dragons.
Change-Id: I16711fe9f449e85dd8b2369e1fcec6c9f81d5ae0
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Even though our ANGLE versions only partially supports OpenGL ES > 3.0,
there are users who want to use functionality that is available. By
setting major and minor version we can support this use case.
Fixes: QTBUG-72762
Change-Id: I9a1d3009355693baa971deb3c4bbf14c595edf0b
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Our current ANGLE version (chromium/3280) relies on validation to be done
when doing the rendering, as the validation at the same time completes the
caching. Skipping the validation caused asserts and rendering issues.
The part of the validation that failed before is now deactivated in Qt's
copy of ANGLE as it is not relevant for our use case, so that validation
can be re-enabled now.
This reverts commit a1dec825f9.
Fixes: QTBUG-73317
Change-Id: I5fd176eaa0bc28d93ca93019b7092211fe5bcce5
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
We run into validation issues when using the ES2 code path when blitting
widgets on winrt. By using ES3 we not only avoid this issue, but there
might also be performance gains.
We now call window()->format() instead of window()->requestedFormat as the
latter will not respect the values that were set on initialization of the
native window (which is done in QWinRTWindow's constructor).
Change-Id: I5ed7a9326691375f9c9cb5d8d22ee8d1b643fbd0
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Update our cflags and lflags with the ones found in android.toolchain.cmake
Fixes: QTBUG-73274
Change-Id: Id9fd9bf04df959239abd3100090a1485e872b2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The patch to elide the QToolButton text when there is not enough space
introduced a regression with multi-line text.
Fix it by using the newly introduced common function to elide multi-line
text.
Fixes: QTBUG-72226
Change-Id: I066ebbd2f360add93406cc29bb4bbbebf599ba42
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Factor out the calculation of the elided text from
QCommonStylePrivate::viewItemDrawText() so it can be used by other
painting functions.
Change-Id: I28e6bfd2fe4d7c552848446fa9913df78589d15b
Reviewed-by: Christian Andersen <csandersen3@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Try to better describe what it is and what it does. Also mention
its strongest use case.
Change-Id: Ib5c3e8a3c9b96169c139c5d7e8995a6a49d7d5e1
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
