The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecate the constructors, add guards.
Use a QStandardItemModel in tst_QCompleter::setters() instead.
Task-number: QTBUG-69410
Change-Id: If77298982bb3d0b5321ae1271fab3f33b196101d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Words should not be abbreviated.
Split a long line and reflowed some comments in the process.
Fixes: QTBUG-78008
Change-Id: I52d75409f02e2cecbed3e94d424617ad594c275b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The API is problematic for several reasons:
- the mixing of flags and enum in a single enum type
- the name "type" as somewhat overloaded
- the ease of misuse when comparing the result rather than testing
for a bit being set
In light of this, focus for 5.14 on the new isShortcut and
isSymbolicLink functions, thus migitating the problematic
isSymLink which conflates the two concepts.
Change-Id: I57e02321edd5061f69a775f04a0932ef89adf866
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This has its own locale data, extracted from CLDR. This data may
potentially be shared with other variants on the Islamic calendar, so
is handled by a separate base-class, QHijriCalendar, on which such
variants may base their implementations.
[ChangeLog][QtCore][QCalendar] Added support for the Islamic Civil
calendar, controlled by feature islamiccivilcalendar, with locale data
that can be shared with other implementations, controlled by feature
hijricalendar.
Fixes: QTBUG-56675
Change-Id: Idf32d3da7034baa8ec5e66ef847e59a8a2f31cbd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These functions tighten the integration of QMargins(F) with the rest
of the geometry classes by providing a way to apply margins to sizes
(and later, rects).
Apply them in a few obvious cases across QtWidgets.
[ChangeLog][QtCore][QSize/QSizeF] Added grownBy(QMargin(F))/shrunkBy(QMargin(F)).
Change-Id: I8a549436824cdb7fb6125a8cde89d5bf02826934
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This has its own locale data, extracted from CLDR.
[ChangeLog][QtCore][QCalendar] Added support for the Jalali (Persian
or Solar Hijri) calendar, controlled by feature jalalicalendar.
Fixes: QTBUG-58404
Change-Id: Id5c56a10db05a4fd612aafc01615273db81ec743
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These share their locale data with the Gregorian calendar, making them
virtually free to add. Still leave them out of the boot-strap build,
though.
[ChangeLog][QtCore][QCalendar] Added support for Julian and Milankovic
calendars. These are enabled by default, except in bootstrap builds.
Change-Id: I585045ed9e78c1e959957f6772b3e144093b701c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Replace foreach with range-based for loop, replace some int values with
the correct Qt flag enum as drive-by.
Change-Id: I41c52f6ae6c537fa9ad4f9e169485533936952d1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Qt has traditionally considered Windows shortcut files equivalent to
symlinks on Unix file systems. Because of NTFS symlinks, the
interpretation of shotcut files as symlinks is confusing.
In this change, QFileInfo treats shortcut (.lnk) files as regular files
but can follow the pointed object.
In addition, QFileInfo introduces a more comprehensive file type. So
that applications can make well-informed decisions about how to treat a
file system entry.
Based on the implementation of QFileInfo::type(), two inline helper
functions are introduced to QFileInfo.
1. isSymbolicLink, returns true if it points to a symbolic link.
2. isShortcut, returns true if it points to a shortcut.
[ChangeLog][QtCore][QFileInfo] Introduce QFileInfo::type() to replace
the isSymLink method.
Task-number: QTBUG-75869
Change-Id: Icc0dd52f9ad0ea50b0265d77ee0d0a3d25054e39
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As a macro, we can't directly deprecate it, but need to make it call
something deprecated. That is a new ctor with a new enum type
added. The type might be useful for other such ventures, so put it
into qglobal.h
Remove the QT_NO_UNICODE_LITERAL protection, as it's always false
these days, and QT_UNICODE_LITERAL is unconditionally #defined a 20
lines above.
[ChangeLog][QtCore][QStringView] Deprecated the (undocumented)
QStringViewLiteral macro. Just use u"" or QStringView(u"") instead.
Change-Id: I9141320225037e1bc6b7f920bf01a9d0144fdac2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When I initially added it, it was ony for QCborValue, but I never added
the tests. Turns out there were two bugs:
[ChangeLog][QtCore][QBitArray] Fixed two bugs that caused QBitArrays
created using fromBits() not to compare equal to the equivalent
QBitArray created using other methods if the size was zero or not a
multiple of 4. If the size modulus 8 was 5, 6, or 7, the data was
actually incorrect.
Fixes: QTBUG-77285
Change-Id: Ife213d861bb14c1787e1fffd15b70573d162042c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For symmetry with QSize and QRect and because there were some users in Qt.
Port those users.
[ChangeLog][QtCore][QPoint/QPointF] Added transposed().
Change-Id: If4f23dbcf7d67983a6b1885e0d1d538115b49e2b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends 2e1763d83a.
The new range ctors need deduction guides, since the compiler can't
deduce the value_type from a pair of iterators.
Change-Id: I3ec1e5f91305b317c443b6a70246be416b55bad9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Commit 8010e906d3 accidentally ended up
removing the removal-on-undefined-insertion check by calling insertAt
instead of insert, which had it. This patch moves the check back into
setValueAt.
Change-Id: Ic381e284d3da37e31c4eb29f79dfab9c55c2e3e9
Fixes: QTBUG-77204
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also optimized the existing QL1S overload of non-const operator[](), and
applied Extract Method refactoring to the other existing QL1S overloads.
[ChangeLog][QtCore][QJsonObject] Added insert(), remove(), and take()
overloads taking QLatin1String.
Change-Id: I5e737cf2d7d9ffb325d6981db1e4a6a9f093657b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
[ChangeLog][QtCore][JSON] Added overloads of functions taking key
strings as QStringView; in QJsonObject, QJsonValue and QJsonDocument.
Change-Id: I78b40aba8200003acfae257ff06f5f15737005e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
When successfully finishing a parse, it's reasonable to expect that the
QIODevice was advanced to the end of the input data.
[ChangeLog][QtCore][QCborStreamReader] Fixed a bug that caused the
QIODevice that the data was being read from not to show the entire CBOR
message as consumed. This allows the user to consume data that may
follow the CBOR payload.
Fixes: QTBUG-77076
Change-Id: I1024ee42da0c4323953afffd15b23f5d8fcc6f50
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Applications might receive paths with Windows' '\\?\' markers, which
indicates a long path to Win32 APIs, when the application is opened by
explorer via file association. Qt not ignoring those markers will fail
to open such files.
By stripping the marker in QDir::fromNativeSeparators, QFile, QFileInfo
etc automatically are able to handle such paths. QDir::cleanPath is
also documented to normalize separators, so it needs to be done there
as well.
[ChangeLog][QtCore][QDir] Remove Windows specific long path markers
when handling file paths with native separators.
Change-Id: I526a890614edee8c85b39fc12c98e7ddb6e0d793
Fixes: QTBUG-75117
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Current codebases assume isCompressed() implies ZlibCompression, since
there was no compressionAlgorithm() getter. In order to force codebases
to change, deprecate isCompressed() and force handling of the algorithm.
The replacement API is being introduced in 5.14, which is why the
warning is being emitted in 5.15 only.
Change-Id: Ief874765cd7b43798de3fffd15a9f5d978951ea5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Caused by commit 01301b0b34, which made
vector.resize(vector.size()) not to detach, which was used by fill() and
assumed that detaching happened. The test does not test the resize()
behavior, only that fill() is not broken anymore.
[ChangeLog][QtCore][QVector] Fixed a regression that caused fill() not
to detach, corrupting shared copies.
Fixes: QTBUG-77058
Change-Id: I6aed4df6a12e43c3ac8efffd15b1b527a8007bf3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Don't call realloc() with all its machinery when we know exactly what
to do: destroy the last element and decrease the size by one.
Extend the test, removing the unused Foo class for a new Tracker one.
Change-Id: I568eef4f6335669689fb16fd23af92cb4d6464bd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The call to QFileDevice::unsetError() in QSaveFile::open() does
not clear QSaveFilePrivate::writeError. Clear it in addition.
Fixes: QTBUG-77007
Change-Id: I5e5009750f1726d1c74c1b4eb1c33f3a5393fe4f
Reviewed-by: David Faure <david.faure@kdab.com>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some compilers (hello, MSVC) do not produce literal types in Qt
because their constexpr support has been blacklisted.
Therefore, amend the check for literal types in Q_ARRAY_LITERAL:
only do the check if the compiler supports constexpr.
Change-Id: I7cffe00dde447d975aa6a7d02248df9c351508ff
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... except for tests, which manually undefine the macro.
Like QT_NO_FOREACH, this is a technical way to keep JSI-free
modules JSI-free going forward.
Change-Id: Icf1342da00a700f42f9e32a253d1cdb94c38dd7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We stopped storing the patch release number of Qt in the plugin metadata
in commit 7bd79b3cff (5.13), to make it
simpler to parse the validity of plugins before decoding the CBOR
payload.
Fixes: QTBUG-76855
Change-Id: I6aed4df6a12e43c3ac8efffd15adbbf83e928866
Reviewed-by: Liang Qi <liang.qi@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise "QVarLengthArray<Foo> x = {};" gives a warning. Also, some
compilers get confused about "QVarLengthArray()" this way.
Task-number: QTBUG-76199
Change-Id: I4296586c0181d3e6e82ca8b7b79aeb9a21645d1f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As planned when adding YearRange: now that it's merged up to dev, move
it to QDateTime, since we can add to the API at 5.14.0.
This follows up on commit 82ad4be4a2.
Change-Id: I81b6c2331121a71e2592514781c02c5756e70c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QStringList] Added QStringView overloads of join(),
filter(), and replaceInStrings().
Change-Id: I9636e21e2e43ed46cce0aa7fa23ab0710aa641ba
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... and schedule it for removal in Qt 6.
This appears to have come to some fame on the internet, so better add
a deprecation warning before we remove it in Qt 6.
Change-Id: I42d91d933f47dfd2d8d54c92358e9e46ced6bf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix warnings:
Using QCharRef with an index pointing outside the valid range of a QString. The corresponding behavior is deprecated, and will be changed in a future version of Qt.
introduced by qtbase/c2d2757bccc68e1b981df059786c2e76f2969530 (5.14).
Change-Id: Ie6f0e2e3bb198a95dd40e7416adc8ffb29f3b2ba
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is usually the case on Android, where running this test would
require deployment of files to the emulator. This doesn't give us any
further testing that we don't already do by running this test on regular
Linux, so skipping the test instead if the preconditions aren't met.
Change-Id: I3722796634871213ba51c89ae7f40b19f954f2cb
Fixes: QTBUG-73566
Reviewed-by: Daniel Smith <Daniel.Smith@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is sufficient to run this test on systems where we don't need to
set up dependencies and satisfy other assumptions the test makes. It is
safe to assume that if this test passes on regular Unix, then
QTemporaryFile will behave as expected on Android as well.
Change-Id: Iaf9a67d7c12b3acfd0992bab591c3f906b073d9e
Fixes: QTBUG-73564
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This version of arg(), unlike its QString counterpart, transparently accepts
views without conversion to QString, and is also extensible to further argument
types, say a future QFormattedNumber.
[ChangeLog][QtCore][QStringView/QLatin1String] Added arg(), taking arbitrarily
many strings.
Change-Id: If40ef3c445f63383e32573f3f515fdda84c7fe3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ifea720470541000481fbacc510b4cb589c9990d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Iff9d4be685bf360ad921e29a82cb878ae5c46180
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: If5d5a9d1c3f094d554110ada3b259f4d863e7121
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I60ffa6df83aaf520730cfbb1dd3f18a2d2e19977
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check to disable the test was the one for QRegExp. This patch fixes
that.
Change-Id: I8783f582998cdd6ffe5dc5dafb3d53d56cd91213
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ibbd161700bf9e75736652b99dfa1ffd47e584249
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ie89641601763ff41eee5356a4b5ddee7ef810fbc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This patch adds the missing tests for the QRegularExpression class to
the QDataStream tests. Only QRegExp was tested until now.
Task-number: QTBUG-72587
Change-Id: I68ad1500ecbb041bbc6fbdff04b99171530cc0fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not removing QT_EMULATED_ALIGNOF logic from qglobal.h at this point, as
it might be used elsewhere.
Change-Id: Ie78922bb604a54aed03ab5b88e31a7f29a3a4de0
Fixes: QTBUG-73561
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without this, a local build of this test on macOS fails.
Change-Id: Ie03fa47ff0a54db752af47f223fbe5724cd9c976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code made two incorrect assumptions: that the strings used are "AM"
or "PM", or would be translated. Instead, the locale provides the
correct strings, and there is no need to translate. However, in order
not to break existing translations, we give those preference.
And that the AM/PM string is not longer than 4 characters, while in
e.g Spanish/Columbia locale the strings are "A. M." and "P. M.", ie 5
characters long. Also, the use of qMin in a function that is asked to
provide the maximum section length is wrong.
[ChangeLog][QWidgets][QDateTimeEdit] Use the information provided by
the locale to determine the AM/PM strings, unless they are already
translated.
Change-Id: I6d1b05376e5ac62fc58da2cdea2e6cb732ec6747
Fixes: QTBUG-72833
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QTextBoundaryFinder] Sentence breaking now
no longer breaks between uppercase letters and comma.
This is a deviation from the Unicode specification,
but produces less surprising behavior.
Fixes: QTBUG-75857
Change-Id: If1e78b3be3f20250d01100353ea7da6110985f82
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
NoDefaultConstructorRef1 was taking a reference of the input, which
meant in the first test it would get a reference to the temporary
created by the 1 literal. A temporary that would be out of scope by
the time we check its value.
Instead add a test with unique_ptr to test we can pass movable
temporaries.
Change-Id: I6b02377dfe30c82b6e71bfb3353a81ad81558ed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
The value of NColorRoles got changed since 5.11. It introduced one more
role called "PlaceholderText" in the ColorRole enumeration.
When using QDataStream (5.12) to read QPalette objects from a file
written by 5.9 (<5.11), the processing results are inconsistent.
Fixes: QTBUG-74885
Change-Id: I14d57f9603a26e5890b4fd57c7e464c5b38eb3f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QScopedPointer uses normal delete, but we need delete[].
Change-Id: Id62a2c55f75ef4aa60580f5e04c4bf306a6dd3c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such files do not exist (as per QFileInfo::exists), but on some
platforms that rely on realpath(), QFileInfo::canonicalFilePath did
not return the empty string.
Use the same logic on macOS as we already did on Android, and include
a test case. Remove the unnecessary dynamic memory allocation and
use a stack-allocated array instead, unless we use modern POSIX in
which case realpath() will alloc the memory for the result for us.
Change-Id: Ide987c68ebf00cbb7b1a66c2e9245a12c7807128
Fixes: QTBUG-44242
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's not clear why this test fails - and only does so sometimes - but
fail it does, so we ned to skip it to let development keep going. As
it happens, the same platform over-optimizes various computations
using qfloat16; which can at least be used to test for this platform,
since it wrongly distinguishes two qfloat16 values that theory and all
other platfomrs agree should coincide.
Fixes: QTBUG-75812
Change-Id: Ie9463d7dc21bca679337b475d13417b9f42bbf9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add support for surrogate code points U+D800 through U+DFFF,
represent them with JSON escape sequences.
https://github.com/tc39/proposal-well-formed-stringify
Change-Id: I84fea53a8ef400beebefdba10ea82dc510fe7dda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The formatting of times in Norwegian has reverted to using dots in
place of colons, as it did before v31 (commit 82deb0ad1), so reverted
the tests to their state before that.
Change-Id: I8a09ce253731bb0f0f3caca117f06ad568940a81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The file system appears to cache too aggressively, so if the reported
storage size doesn't change after flushing to disk, ignore the failure.
Change-Id: Iba7dce79591447fac296bfe92c2dc993d36d0c2a
Fixes: QTBUG-69868
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's short names setUtcOffset() and utcOffset() have been
deprecated since 5.2, in favor of setOffsetFromUtc() and
offsetFromUtc().
QDate's shortDayName() and shortMOnthName() have been deprecated since
5.10, in favor of QLocale's dayName() and monthName(). Also, the
tests that were using them are testing methods only present when the
datestring feature is enabled; so condition them on that feature.
Change-Id: Ibfd4b132523ca8fbc1cb163353a44e0500877fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QMetaObject] Non-copyable lambdas can now be used
with invokeMethod(). For consistency reasons, the functor object is
now always moved.
Fixes: QTBUG-69683
Change-Id: I66ff5e21d6d1926f0f7c5f8c304bed1a90b69917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Without this change, the target of a symbolic link that points to a UNC
share would include UNC in the target path, and not be correctly made
absolute.
Add a relevant test case, and use the opportunity to factor out the
helper code that creates NTFS symlinks into a function that takes
care of error handling.
The file created with the new test case only gets cleaned up correctly
when passing the file path into QDir::rmdir, which is either way the
right thing to do.
[ChangeLog][QtCore][QFileInfo] Fixed resolving of symbolic links to UNC
shares on NTFS file systems.
Change-Id: I9ba75d627aedf7c4cc289f0cb71088d795d30d8a
Fixes: QTBUG-73688
Task-number: QTBUG-63970
Task-number: QTBUG-30401
Task-number: QTBUG-20791
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaObject::newInstance returns a QObject, thus it's not possible to
create a new instance of a Q_GADGET using this function. Previously, we
returned a non-null QObject pointer for such scenarios, which then
leads to crashes when one tries to use it. Now, we check whether the
meta object inherits QObject's meta object, and error out early
otherwise.
Change-Id: I7b1fb6c8d48b3e98161894be2f281a491963345e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test changes the current directory to the test directory
in fromUserInputWithCwd(), but did not restore it, causing:
Totals 898 passed, 0 failed, 1 skipped, 0 blacklisted, 368ms
********* Finished testing of tst_QUrl *********
QTemporaryDir Unable to remove "C:\\TEMP\\tst_qurl-ryVxqu" most likely due to the presence of read-only files.
Restore the old directory at the end to fix this.
Change-Id: I62669868f3c6d97dd38ebac76515428c14b7e1e7
Reviewed-by: David Faure <david.faure@kdab.com>
Includes a fixup for 03fadc26e7, which
removed the check on empty transition list, needed when no data are
available. Ensured that such a data-free zone would in fact be
noticed as invalid during init().
Fixed handling of times before the epoch (we still want to consult a
POSIX rule, if that's all that's available) while ensuring we (as
documented) ignore DST for such times.
Fixed handling of large times (milliseconds since epoch outside int
range) when looking up POSIX rules. Gave QTimeZonePrivate a YearRange
enum (to be moved to QTimeZone once this merges up to dev) so as to
eliminate a magic number (and avoid adding another). Moved
year-munging in POSIX rules after the one early return, which doesn't
need the year range.
Added test-cases for the distant past/future (just checking UTC's
offsets; SLES has a minimal version of the UTC data-file that triggers
the bugs fixed here for them).
Fixes: QTBUG-74666
Fixes: QTBUG-74550
Change-Id: Ief7b7e55c62cf11064700934f404b2fc283614e1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A string can parse as a non-zero double that's smaller than the
smallest float yet be a faithful representation of the smallest float.
So rather than testing for non-zero doubles less than the smallest
float, test for non-zero doubles that cast to float zero; these
underflow. This means small values close below the smallest float
shall round up to it, rather than down to zero, requiring a tweak to
an existing test. Added a test for the boundary case (and tidied the
test data).
Fixes: QTBUG-74833
Change-Id: I4cb30b3c0e54683574b98253505607caaf88fbfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It can happen that QDataStream is fed a QVariant that contains a QPixmap
representation, that will make the application crash when trying to
restore it
This is specially important for cases in which applications expose dbus
interfaces with QVariantMaps
Change-Id: Ife4feaef30f30e7e27d88464bd6b2a247f743123
Reported-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Recurse down the sibling at column 0 of the index instead down the
index.
Change-Id: Ie78d8b28eab7438ca3f83ee0df177115ca82806e
Fixes: QTBUG-73864
Reviewed-by: David Faure <david.faure@kdab.com>
While an invalid time-zone shall have no transitions, so may various
constant zones, like UTC. The TZ data may include only the POSIX rule
for such a zone, in which case we should use it, even if there are no
transitions.
Broke out a piece of repeated code as a common method, in the process,
since I was complicating it further.
Added test for the case that revealed this; and made sure we see a
warning if any of the checkOffset() tests gets skipped because its
zone is unsupported.
Fixes: QTBUG-74614
Change-Id: Ic8e039a2a9b3f4e0f567585682a94f4b494b558d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce a logging category for the qDebug()-output.
Add a meta type registration for QList<QPersistentModelIndex>, fixing
numerous warnings like:
WARN : tst_QItemModel::remove(QStandardItemModel:invalid start, valid count 5) QSignalSpy: Unable to handle parameter 'parents' of type 'QList<QPersistentModelIndex>' of method 'layoutChanged', use qRegisterMetaType to register it.
Fix a Clang warning about potential misuse of operator ,
Task-number: QTBUG-73864
Change-Id: I60998403a44f5df8767926951ee13d1ed1e93c37
Reviewed-by: David Faure <david.faure@kdab.com>
Wait for the result at the target index if the future
is running and the iterator index is past the current
result count.
Determine if there is a result at the target index
after waitForResult() returns, and return -1/end if
not.
Also support decrementing the end iterator. In this
case wait for the future to finish in order to get
the final result count.
Task-number: QTBUG-59811
Change-Id: I8fcc711bab2e72c3c5196a55b794d25e18bb324d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use setPath() instead, as advised in the deprecation warning.
Change-Id: I2f22220885938808c8efb85720ad10f7e05801ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some directories that depend on QtGui were being included without the
appropriate check for qtHaveModule(gui).
Change-Id: I7c348c74464d44cbd35a027f188f8a23bb2021d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Regular update in preparation for 5.13, adding tests for additions
since 5.9.4/5.10.1/5.11.0's update 7e946030 (the last to record its
upstream version sha1). Corrected the license header: it's now
published under MPL 2.0 (not 1.1); and our secondary licensing of it
is as LGPL3. Deferred full header over-haul until we've worked one
out in detail.
[ChangeLog][Third-Party Code] Updated DNS public suffix list
Task-number: QTBUG-72623
Change-Id: Iabdbbbfd79624830396c2a6fe0a73389bd6ce5b7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Blacklisting did not work as blacklist should have contained osx
instead macos
Change-Id: Ifd76a38d371ccce545eb5df030aaa819b00a5b48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
QStringListModel::setData documentation states that
"The dataChanged() signal is emitted if the item is changed."
This patch actually respects the doc. setData will check that the data
actually changed before sending the dataChanged signal.
[ChangeLog][QtCore][QStringListModel] setData will now emit the
dataChanged() signal only if the string set is different from
the one already contained in the model
Change-Id: I4308a6f3b4851203fb899c5e29a36076e0c32f2f
Reviewed-by: David Faure <david.faure@kdab.com>
The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, the C locale was treated as English because each back-end
takes the locale's bcp47Name(), which maps C to en. However, the C
locale has its own rules; which QString helpfully implements; so we
can delegate to it in this case. Extended this to sort keys, where
possible. Clean up existing implementations in the process.
Extended tst_QCollator::compare() with some cases to check this. That
required wrapping the test's calls to collator.compare() in a sign
canonicalizer, since it can return any -ve for < or +ve for >, not
just -1 and +1 for these cases (and it'd be rash to hard-code specific
negative and positive values, as they may vary between backends).
[ChangeLog][QtCore][QCollator] Added support for collation in the C
locale, albeit this is only well-defined for ASCII. Collation sort
keys remain unsupported on Darwin.
Fixes: QTBUG-58621
Change-Id: I327010d90f09bd1b1816f5590cb124e3d423e61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All types that can be trivially copied and destructed are by definition
relocatable, and we should apply those semantics when moving them in
memory.
Types that are trivial, are by definition not complex and should be
treated as such.
[ChangeLog][QtCore] Qt Containers and meta type system now use C++11
type traits (std::is_trivial, std::is_trivially_copyable and
std::is_trivially_destructible) to detect the class of a type not
explicitly set by Q_DECLARE_TYPEINFO. (Q_DECLARE_TYPEINFO is still
needed for QList.)
Done-with: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iebb87ece425ea919e86169d06cd509c54a074282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QUrlQuery] QUrlQuery now provides an
initializer list constructor. It can be created using a list of
key/value pairs.
Fixes: QTBUG-68645
Change-Id: Ief5939aa477718f6dd3580f2c60f95ff3aa892ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix clang-tidy warnings:
- Use range-based for and streamline some code
- Use nullptr
Change-Id: Iad43490d0e968baa76d54d3bf81558a48b19cdbd
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix deprecation warnings - replace qFindChild/Children() with
QObject::findChild/Children() and replace some 0 with nullptr.
Change-Id: If2f01d12fa91d09d98a61f73b0449a6773ac93db
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We have a problem. Our types don't play well with the std unordered
containers, because they do not specialize std::hash. We therefore
force our users to come up with an implementation, hindering
interoperability, since any two developers are unlikely to come up
with compatible implementations. So combining libraries written by
different developers will result in ODR violations.
Now that we depend on C++11, and thus the presence of std::hash, we
still face the problem that the standard does not provide us with a
means to compose new hash functions out of old ones. In particular, we
cannot, yet, depend on C++17's std::hash<std::string_view> to
implement std::hash<QByteArray>, say. There's also no std::hash for
std::tuple, which would allow easy composition by using std::tie().
So piggy-back on the work we have done over the years on qHash()
functions, and implement the std::hash specializations for Qt types
using the existing qHash() functions, with a twist: The standard
allows implementations to provide means against predictable hash
values. Qt has this, too, but the seed is managed by the container and
passed to the qHash() function as a separate argument. The standard
does not have this explicit seed, so any protection must be implicit
in the normal use of std::hash.
To reap whatever protection that std library has on offer, if any, we
calculate a seed value by hashing int(0). This will be subject to
constant folding if there's no actual seed, but will produce a value
dependent on the seed if there is one.
Add some tests.
A question that remains is how to document the specialization. Can we
have a \stdhashable QDoc macro that does everything for us?
Task-number: QTBUG-33428
Change-Id: Idfe775f1661f8489587353c4b148d76611ac76f3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
You cannot manipulate variables in custom target dependencies, so the
following code was invalid:
i386_d.depends = EXPORT_VALID_ARCHS=i386
In order to still build the fat binary, we split the project in four,
one for each architecture, plus one to create the final package.
Change-Id: If08cf54e2e4098a7e10df41b7ea8d2bf699f58be
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Including 4f7ad5ec44
to make appimage not ambiguous
Change-Id: I8db13fc785b267c09667ef38430bf98135c7f0d6
Reviewed-by: David Faure <david.faure@kdab.com>
The unit tests weren't running into this problem because the every
setDevice() was preceded by the object being initialized with the exact
same data, so there was never a previous error state. I've only changed
a couple of tests, left the other setDevice() unchanged so we test both
behaviors.
Fixes: QTBUG-71426
Change-Id: I1bd327aeaf73421a8ec5fffd1561a590e3933376
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This avoids memory allocation and data copying in e.g.
QObject::property().
Detected by heaptrack's "Temporary allocations" counter in an
application using the breeze widget style (many animations).
Change-Id: Iabdb58a3e504cb121cce906ef707b0722de89df6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented a new proxy model to transpose the source model.
Rows will become columns and vice-versa.
Both flat and tree models supported.
[ChangeLog][QtCore] New class QTransposeProxyModel to
swap rows and columns of the source model.
Change-Id: I902963c6b81aa0f63b5ad2bddca538f28b565084
Reviewed-by: David Faure <david.faure@kdab.com>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When QMimeProvider parses the shared mime database xml files,
it will read the <comment> element for mime comment and treat the
`xml:lang` attribute as locale language string. When no `xml:lang`
attr is provided, QMimeProvider will read the value and treat it as
a en_US locale string as the default key.
When we call QMimeType::comment(), it will try to get the locale
comment string with the default language (QLocale().name()), once
it can't find a matched result, it should return the default key
(which QMimeProvider set it as en_US locale before) as fallback.
Task-number: QTBUG-71314
Change-Id: I444f8159d6f19dfef6338cd79312f608d8f13394
Reviewed-by: David Faure <david.faure@kdab.com>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added operator[] to QCborValueRef and mutating operator[] both there
and in QCborValue. If the value (referenced) is not a container, it
is replaced with a map and a reference into the result is returned.
If the value is an array and the key is a string, negative, or more
than 0xffff, the array is first converted to a map.
Change-Id: Ibbc9e480fb25eb3d05547c8a1b99e762b2a68b68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This way there is only one for loop, which is more optimizer friendly
Change-Id: Iaa02026627d5259c3eea1ff5664e8f22664eef73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
