QVariant implementation is based on delegation to a handler. The handler
has rather simple construction, it is a set of function that implements
a switch statement over known types and redirects calls to a right
method of an encapsulated types instance. Unfortunately after qt
modularization project, it is not easy to use types directly from
different modules, as they can be undefined or completely unaccessible.
Which means that each module has to implement own handler to cooperate
correctly with QVariant. We can suspect that list of modules known to
QVariant will grow and it is not limited to GUI, Widgets and Core,
therefore it would be nice to have an unified, from performance and
source code point of view, way of working with handlers.
This patch is an attempt to cleanup handlers. Keynotes:
- Each handler is working only on types defined in the same module
- Core handler implements handling of primitive types too
- Custom types have an own handler
- Each handler is independent which means that dispatch between handlers
is done on QVariant level
- Handlers might be registered / unregistered using same interface
Change-Id: Ib096df65e2c4ce464bc7a684aade5af7d1264c24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
because it can be useful outside QtGui. The function
QOpenGLTextureCache::bindTexture gives a very convenient way to get a
texture from an image.
Change-Id: I2e22c0a3a8f1f307d0b558280043f726e3d8093a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Some time ago this was a blocker that didn't allow to refactor QLocale
implementation due without making binary incompatible changes. Deinlining those
functions for Qt5, it shouldn't be performance critical code path.
Change-Id: I6cb19e32188a2df223d04be0c613a6176ad8d118
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
CallConstructor<T, /* CanUseInternalSpace = */ false> is called when we need to
construct an object that couldn't be fit in qvariantdata, meaning either it is
not a POD type (Q_PRIMITIVE_TYPE), or it is simply too large to fit there.
Change-Id: Ied122b4a6f600e14312a8d515f5b3e91214a94f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
... instead of QEventDispatcherUNIX. The Cocoa dispatcher does not use
any of the facilities of the UNIX dispatcher, and it reimplements every
virtual method already (with the exception of flush(), which just needs
an empty implementation).
Change-Id: I24aefd169888946afac7800192a0f96770787718
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This change makes Qt load the default openssl config always, not just
when compiled with OPENSSL_LOAD_CONF. This means that facilities like
openssl engines (and their configuration) are usable. An alternative
would be to call OPENSSL_config(NULL) ourselves, but that's exactly
what the OPENSSL_add_all_algorithms_conf does for us.
Task-number: QTBUG-16018
Change-Id: I4cda701f82627e0541b6225009f4e1249aec9d47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Much like DataLocation = GenericDataLocation + domain + appname,
this makes CacheLocation = GenericCacheLocation + domain + appname.
This way a framework library can have an application-independent cache
(like ksycoca).
Change-Id: I6a8c47ff85b7d5c68b594cc8b071a752d96b029d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Inotify has been available in Linux for some ~6 years now, 7 when Qt 5 will
actually be released, so I'd say it's safe to remove this fallback path now,
particularly as the autotest notes that it's broken.
Change-Id: I49dbb161d4765d63e92f512a6375323c7d37ccbe
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Similarly to ec9ea7f3e8, the code in unix
(non-Linux/OS X) is actually the same as for integrity, so merge the
conditionals together to save duplication.
This should have the side-effect of unbreaking Qt 5 on integrity wrt
the new QStandardPaths introduction, which was not added to the integrity
block.
Change-Id: Ib512fa781f5ceb240069888ce6958c9af2990d37
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The value is changed to true. It is a common bug that developers expect
this proxy model to reflect the source model when the source changes.
That requires setDynamicSortFilter(true), so we change the default to
optimize for the common case.
Change-Id: I9bf7efdbda10309fa77aed9391c33054aaae4a29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of only from QApplication in QtWidgets, as we need these events
for example in QDeclarativeApplication.
Task-number: QTBUG-21573
Task-number: QTBUG-23331
Change-Id: I0c960bd1c7911d306d274a6e9a1838f158235ed0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
GCC 4.3 introduced the alloc_size attribute to hint the compiler
that allocated memory will be returned, inform the compiler which
parameter holds the size of the allocation.
Change-Id: I8734868f6bd19e201abdacd0a1b0fb80a27883c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pure syntactical sugar, to match up with what the other container
classes offer.
Change-Id: I0f97de011923d9d204cca0fa906b059dc5054a89
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Qt5 modules are supposed to be in a namespace, but if the namespace definition
is hidden in a macro, then moc doesn't know about it and generates invalid
moc_xx.cpp that cannot be compiled due to usage of classes outside of their
namespaces - e.g. in qtjsondb we have QtAddOn::JsonDb::Foo class, but the
moc_foo.cpp expects to find that class in the global namespace instead.
Fixed it in QtJsonDb to define QT_BEGIN_MOC_NAMESPACE="QT_USE_NAMESPACE
QT_ADDON_JSONDB_USE_NAMESPACE", however we need to ensure qglobal.h doesn't
re-define that macro back.
Change-Id: Ic8407f50c11d2d787167ad2f92457aa3ec126d45
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
gray_conic_to, gray_cubic_to and gray_line_to were all single line wrappers
around their equivilent gray_render counterparts, with an additional lie of
error handling that never actually happened.
Since this doesn't really do anything except confuse the reader, let's ... not
do it :)
Change-Id: Id5d86c49174acb92514b628a70bd32d6c6640a5d
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Usually we don't have a plugin for this on linux anyway.
But if we do, we should actually allow it to interface with the
system.
When using AT-SPI the plugin can detect if it should be active.
Other plugins can fall back to using an env var if really needed.
Change-Id: Ic9dcfa305e7cdafbf4a93bcc2dc9a0fcd9b9a7a2
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The original intention was to identify a clipping bug, it turns out
that during a ::begin() (and systemChanged) we should forward the
QPaintEnginePrivate state to our proxy engine.
Instead of using the proxy-pattern subclass rasterengine and
specialize the paths we are able to accelerate using the blitter
interface. This will avoid similiar problems in the future. I have
no performance measurement to show which of the two approaches is
faster/slower.
Change-Id: I39bff11b32b1fe20284c7e8df60050de5991bb6e
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
* Group code responsible for tracking the render pipeline state
to check if we can easily accelerate it
* Code that will call into the QBlittable
* Code that will lock the QBlittable before calling into raster
Change-Id: I862e242d59805de5094ed363b486afcdbc23ff78
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
A default QPainter will set a QBrush with Qt::NoBrush BrushStyle, the
current code detects this as a non solid fill and all calls with fillRect
and a color will not go through QBlittable. Check for Solid or NoBrush
style. Manually verified that a p.fillRect(rect, Qt::red) goes through
the accelerated path now.
Change-Id: Ic0d98030e94f5d11abbe61628fbf71d1e08219c2
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Create updateCompleteState(QPainterState*) so we don't need to
call into the paintengine, move all state methods into the
QBlitterPaintEnginePrivate class.
Change-Id: If30fdcc3f63755e0443bced7d9d9fb993d4ec2b7
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Cosmetic change to remove four spaces of indention from some of the
deeply nested methods.
Change-Id: I67fdd0ab722b7c7c67c4da7a0a0bd86459751700
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
It starts with being initialized wrongly, the call to buffer() will
lock the data while we think it is not locked, it can also get out of
sync by someone calling buffer() again. Remove the variable and
check with the QBlittable if we need to lock the resource into memory.
Change-Id: I350375011138d1b4c2c48c100b7b30b8ea2ae460
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Move the bit helper functions into CapabilitiesToStateMask as they
are only used in this class, allocate the class as part of the
QBlitterPaintEnginePrivate, shorten the name as well.
Change-Id: If22ddd117a9789cd98edb08f23fd0ffabb17d5a5
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Spend some bytes for spaces after comma and keywords. This should
now mostly follow the Qt style guidelines.
Change-Id: I3298c8d41d40ab5b0153a33d44b1b607a2edca8e
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
CoarseTimers are worst in their first firing, so we prefer a
PreciseTimer for something that happens only once. If the timeout is
too big, we use a CoarseTimer anyway (current threshold is 2000ms).
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: I30b20acf506e442cd58126abfe3a4d70fc13b075
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The API passes the interval as an int, there's no reason to convert
it to a timeval struct. This also prepares for changing the UNIX
timer code to support the different timer types.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ie3cc1ae8f1be6a9ad3f1766051642cbf3e614418
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timer type will control the accuracy of the timer. By default, all
timers are CoarseTimers, which allows for +/- 5% interval adjustment.
PreciseTimers will not have any interval adjustments, VeryCoarseTimers
will have intervals adjusted to full second resolution.
Use QTimer::setTimerType() or the QTimer::singleShot() overload to
specify the type.
QObject::startTimer() now takes a Qt::TimerType argument which defaults
to Qt::CoarseTimer. QBasicTimer::startTimer() gets an overload that
takes a Qt::TimerType argument. The argument is unused for now, since
the QAbstractEventDispatcher interface needs to change (done in a
separate commit).
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: I3100da5aa1fe17ec30b8644897d0fe6ec4a07f52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously they would fall into the unicode handling and return very
strange values.
Change-Id: I62a53894c0983bf53fd79f924b40a6fd3ba02993
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
These all have consted overloads, so there's no need for them.
Change-Id: I3d4f63b8eb8f1b7df7fa772d6172e0a954184d24
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
For future proofing. No need for it to be so small.
Change-Id: I8a0c734f87671881f114922ada7c5bc9524de19b
Reviewed-by: Marius Bugge Monsen <marius@cutehacks.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QByteArray extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QByteArray when the value actually is e.g. a struct of
mixed types the byte array extraction will crash as it attempts to extract
the struct data as a fixed array.
The fix adds DBus type checks to QDBusArgument byte array extraction
operator implementations.
The checks invalidate extracting arrays of other types than bytes to a
QByteArray that worked with the unchecked implementation. The rationale
for this restriction is
1) extracting a QByteArray to a variant checks already that the array
element type is byte
2) Results of extracting arrays of types wider than a byte to a QByteArray
are architecture-dependent making such code inherently non-portable.
Task-number: QTBUG-22840
Change-Id: Ie20f2adc06c697a68055c803215fb408568fdd90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QStringList extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QStringList and the value actually is e.g. an array of
bytes the string list extraction will crash as it interprets the bytes as
char pointers.
The fix adds DBus type checks to QDBusArgument QStringList extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Task-number: QTBUG-22840
Change-Id: I4b67d75b59c5052d939f3a69f3e92dabdb3bdd6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument string extraction operators and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting string-like basic DBus type that actually is e.g. an
integer the string extraction will crash as it blindly attempts to use the
integer as a pointer to char.
The fix adds DBus type checks to QDBusArgument string type extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Previously supported functionality of extracting an object path or type
signature to a string type is retained.
Task-number: QTBUG-22840
Change-Id: I29be1ae592658ca268c65ed692e1d42619d52280
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of doing "I want Linux and do it by selecting Unix and
discarding everything not implementing the Linux ABI". Select the
other operating system first and have a catch all Linux/Unix anchor.
!symbian is left inside as it does not hurt right now but could probably
be removed before Qt 5.0.0.
Change-Id: I731d8349e4f9c0ac33d547523f0a0f422e994e54
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
The previous code did not make much sense
This regressed due to 74c9f9d83f
Change-Id: Ia4374623257863edca706a1c3d8b565d0c6bd4c1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.
It is a quite handy overload in many cases.
Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qevent.h:792:49: error: declaration of 'device' shadows a member of 'this' [-Werror=shadow]
Change-Id: Iccb7e79dd97d55b17fbd4dfaf3503b9e251adcfc
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Filter doesn't have to be a parameter because we always use
DefinedTypesFilter.
Change-Id: I19b8eb47a4c50e290cf712f909aaead8fdc94cd9
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.
Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
After 8fd64d22ac (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.
This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.
Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.
Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When authentication is cancelled, close the channel instead of the
underlying socket.
The previous behaviour could result in further requests being sent
on the closed socket, which caused errors in case of https over a proxy.
Change-Id: I3dbfc164de4fb29a426c06acaac8f29b9da1d705
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
When an ssl socket is closed during connecting, and it is using a proxy
then it is possible for the plain socket to be in pending close state
when transmit() is called.
As errors were not handled, this caused the socket (and https request)
to "hang".
It now propagates the error from plain socket.
Change-Id: I6fb86815a2a63e197cea582f4b153e487543477c
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code which prevents pipelining of requests when authentication is
in use had || where && should have been used.
Also check for blank user with a password.
Change-Id: Ic278cedd370c9d81377f49a0af43aef415cb49ad
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
When decoding a string don't assume valid modifier strings. If a
modifier string is unknown return Qt::Key_unknown instead of skipping
the modifier.
Currently 'Win+a' is decoded to 'A' but should be Qt::Key_unknown.
Change-Id: I1c82031159a8b3c19924a7c9e991bc6b1f90d617
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This allows us to benefit from compile-time optimization
Change-Id: I63dfde3758fcb0ff919fdc0418df1b7586da0b2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add styles/qmacstyle_mac back to the build, modify
qstylefactory to load it on Q_OS_MAC.
Move helper functions from platforms/mac to
qmacstyle_mac.mm. QMacStyle should now be self-
contained and not rely on anything from platforms/mac.
Change-Id: I68fe40bb7f88c01269968bffd9579b7f3b932d4c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Creates a new SocketOption called called TypeOfServiceOption that can be
used with the existing setSocketOption method to set the ToS byte in a
socket socket. This is done only for unix systems because windows
doesn't support directly setting the ToS/DSCP byte:
http://support.microsoft.com/kb/248611http://blogs.msdn.com/b/wndp/archive/2006/07/05/657196.aspx
Change-Id: Idf9da2dd8307ac7057982fbfdf9e4e9ebe366780
Task-number: QTBUG-6221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
OpenSSL's SSL_ctrl() always took a "void *" argument as 4th parameter,
since at least version 0.9.7.
I have no idea why we had "const void *" in there.
Reviewed-by: Richard J. Moore <rich@kde.org>
Task-number: QTBUG-23132
(cherry picked from commit 4db91cbd6147e40f543342f22c05b7baddc52e5a)
Change-Id: Ie570e1cc59b72f13d3e6f3ed6fc1892444a63743
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The logging groves and modifies a vector.. It should at least be a
linked-list. but anyway, it shouldn't be enabled by default
Change-Id: Iaebb1158eea1c907e31e9606b143c0318a189dd1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Look for the the platform plugin in "../Plugins" first.
When deployed inside an app bundle this path will
point to the plugin directory inside the app bundle.
Change-Id: I362981a9e0ca9a3e69396b033a571d0b4e2bf78a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
If the object did not have a QAccessibleInterface subclass it would
crash in the windows accessibility bridge.
Change-Id: I931d69466a5a74a87f1c1c577fb1c918dcc8accf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Instead of always delaying IPv4 when we have both Ipv4 and IPv6 we
should use the order we get from getaddrinfo to descide which one
that should be delayed.
Task-number: QTBUG-23066
Change-Id: Ibe8c4d7000abd6e57fe8c6afac8a4a843e17ff27
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Introduce a specialization for qCompare(QImage,QImage) that
checks isNull, size and format and outputs verbose messages.
Check isNull, size similarly for QPixmap.
Add an autotest:
- Add test to cmptest and make it a GUI application since
QImage requires QGuiApplication.
- Make testlib/selftests capable of running X11-GUI applications
by passing DISPLAY.
- Ignore stderr output for cmptest
- Add test data
Change-Id: I2b29c7822fbeedf2b22c90889739ed7ff859ce92
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Scan the parent directory of the executable if it is located
in a 'Debug' or 'Release' directory
- Report with native separators in the log.
- Use the QString::arg() overloads with several string parameters.
Change-Id: I5ea84411e12978f8f958a0bce3ae10da44cc4e3f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: I43f4188d1c33cd5a07eb7a12bf3343af7e6a211f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I198622270324eea62dd5ad6343fdf7c89e736e6c
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is not the responsibility of the view to insert data into the
model after a dropMimeData call.
Change-Id: Ib2dedddb3239af0e2bf722a28081c68677e6b2af
Reviewed-by: David Faure <faure@kde.org>
Change-Id: I2806ce63f5948dde9c582740bc2f070900987fb5
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
HAVE_TICK_COUNTER is supposed to be set (if possible) from cycle_p.h, so
guarding cycle_p.h's inclusion with HAVE_TICK_COUNTER ensures it will never be
set.
Change-Id: I6313d0a2efd47c89522623e8e7b3f505489ded90
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QPicture doesn't need this for quite a long time now, so get rid of it.
Change-Id: Ie575f32555deb130f7b27e11a7617fb2b3dc4e43
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
There's a const QMovie::cacheMode(), so having this makes no sense.
Change-Id: I0b6f20055fcbb28f3a21a8bc303f82543592c9c6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This allows us to benefit from compile time optimizations when calling
strlen()
Change-Id: If6694117e613a012fce97f8664e6b43005d255de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Was effectively removed in 4.x's 2e7d5def1fdabb5949fbffc629da500aa2bb78d7, but
couldn't be removed due to it being exported.
Change-Id: I5061f50deaeae7f53e8b688633e377095b4463c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both of these have been unused at least as far back as Qt 4.5 according to git
log -p.
Change-Id: I381024cb1621fbfdb806a62e1cc55ce13219ef17
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Use Q_STATIC_ASSERT_X give a better error message.
If C++11 is used, you get the string in the error.
Else, clicking on the QStaticFailure error still shows you the
string in the qobject.h source code)
And report better failure if the return types do not match.
(Without the static assert, you would still have a compilation error,
but in an unrelated place, with no reference to the actual connect()
call. The error was thrown from the virtual call
QSlotObject::call, without saying where it was instantiated)
Previously the error was relying on the existence of a type inside
CheckCompatibleArguments, but the Q_STATIC_ASSERT requires a bool
(hence the introduction of CheckCompatibleArguments::value)
There also was a typo in the return value of
AreArgumentsCompatible::dummy that made that code not work, and that
error not be reported.
(Instead, the error was reported when QObjectSlot::call is instantiated)
Specialization of AreArgumentsCompatible for the void type have been
added because if the return value of a signal or slot is void, the
connection should work.
Change-Id: I5a93ec787ce2a4b94a26630ca31d5001cd294e4d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Modifying the proxy causes a detach(), so the socket is still using
the unmodified proxy.
Changed this to setProxy() the modified one back to the socket.
Test case tst_QNetworkReply::httpProxyCommands()
Change-Id: I448c2f2ab43ce8d78bc6edb8261599bf67372676
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now works with bcm5974: Added manual contact tracking for drivers that
do not report a tracking id and fixed abs limit querying to use
ABS_MT_* instead of ABS_*.
Fixed reported area: The incoming point was the top-left point instead
of the center which was incorrect.
Added pressure support.
Tracking of event type has been removed as handleTouchEvent no longer
needs it.
Broken debug prints have been removed.
Changed udev auto-detection to pick only /dev/input/event*.
Fixed multiple released state reports with some drivers.
Name and capabilities are now set properly for the QTouchDevice.
Change-Id: I8f026c9a14465bfb6d567f4dcf36c5c03f843868
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Else tst_moc::oldStyleCasts will fail if one add STATIC_ASSERT in
some headers included by moc generated files
Change-Id: I29ae64c14f10c889137fde36bb14c8ce047d5244
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
childAt used to return an integer.
Return an interface instead.
Not requiring a direct child to be returned allows optimizing
by bypassing iterating through the hierarchy of accessibles.
For QtQuick this is the only sensible way of implementing this.
The bridges are still responsible for finding the top-most element.
The default implementation in QAccessibleObject is sufficient
to return direct children. The implementation in
QAccessibleApplication is therfore no longer needed.
Change-Id: Id7100dd5bcc3a98de516a7f4a12eaaa41cb46d26
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
It doesn't currently have any effect and needs to be re-thought
anyway.
Change-Id: I6e620ca5b341264bbf5279a19e8f25af8fa7d396
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QMetaTypeInterface has to be POD because it is constructed in a static
array. Constructors in POD types are not allowed so we will use a macro
instead.
Change-Id: Iab9ae776dfe4dcd7148558f02d6181c5917aa5c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Many Mac OS users expect to have the option to see the file extension
of the file being saved in the save dialog. This patch enables that
option.
Change-Id: I7713bcef16b6f43135b382c7107f306009c7a0a1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Check for qApp before using. I'm aware that this is in commented
out code right now; but I wanted to make sure it doesn't
accidently slip back in without this check so I'm submitting
this patch. It caused problems at shutdown in 4.8.
Change-Id: I1c2358ab94f8b698e5519b3e0f988fb5cdd653fa
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The private class had two append() methods, one appending a column and
one appending a row. Use more meaningful names instead of overloading
orthogonal operations.
Change-Id: I97e0268d6cb289694557846f244fe770cf980aaf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These were only actually implemented on Symbian, thus, they aren't too useful,
apart from confusing developers when they don't work.
Removed per the discussion on:
http://lists.qt-project.org/pipermail/development/2011-December/000860.html
Change-Id: Id097cb392a3d964364adbe51a72a22927b9c382c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Introduced by 4ebceaba39.
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I81985c4121db5f6abd832f64ef412646daec6259
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The code for reading named pipes can now be used in
other places as well.
Change-Id: Id734617a3927e369491a6c5daf965169ceb01f74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Events for mouse clicks that active windows are by
default suppressed. Qt needs to see all events in
order to properly close popup windows.
Wether or not the event should be sent to the
target needs to be implemented later on - in the
QWidget world this is controlled by WA_MacNoClickThrough
Change-Id: I4b96d33978ed2b3cb793f52bb5b6fef234190a00
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Incase we have both IPv4 and IPv6 available after the host lookup
we should delay the connection attempt to IPv4.
Task-number: QTBUG-23066
Change-Id: I8c0177cf125c9daae314ada73cacef790a39b856
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Use QTestLog::info() rather than qDebug() to output informational
messages from testlib. Source file and line are deliberately omitted as
they would come from testlib rather than from a test program.
Change-Id: I7b479bba4d3d553c6fa846d8d5ea2c29a8ef42b8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, if the signal dumper was switched on with the -vs
command-line switch, it would never be switched off again.
Change-Id: I192e188010471525723fad0844ff33e9482128ea
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Convert bezier curves to polylines before rasterizing with gray
raster.
Change-Id: I353debd4338f2a3ce2fa1cfa1bff9dd2e36f05ab
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Call [QNSView updateGeometry] directly. We can't
got through the frameDidChange notification since
we are not actually changing the QNSView frame.
Rename frameDidChangeNotification -> updateGeometry
sine it now handles updates from two different sources.
Change-Id: I848e558294093cd51d97778734b5cf872435266a
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Unless QWindow:baseSize returns a valid value.
Setting the size caused lots of window geometry
instability in Creator.
Change-Id: Iab45e88b47207db900c7655c217959391d84a1bb
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
convertRectToScreen was added in 10.7, use
convertBaseToScreen on 10.6
Change-Id: Ica1ee0f62e1fc9b0d5ccf463419496684da779b7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This removes confusion when we add a Linux-specific QPA dispatcher, and is
technically more accurate, as QEDQPA was not 'the' QPA event dispatcher in the
first place.
Change-Id: I2a41d425f284522ee76ef86782d5eb2bdd805120
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Since integrity was pulling in all the same code (except the glib-in-QT_CONFIG
branch), we can just merge this in.
This shouldn't break integrity unless they somehow magically inject glib into
QT_CONFIG without actually having glib, but the removal of redundancy makes this
worthwhile.
Change-Id: I527b5e60bea4452fdca5eedfe729214f16519234
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This saves us from creating a single shot timer every time we emit
readyRead and eliminates the parallel pendingReadyRead flag.
Done-with: ossi
Change-Id: I1de7f07b83b583b9d60dd8862d6a9f7865b5b891
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We must not close the QIODevice, if we detect a broken pipe.
We still can have data in our read buffer that can be read by the user.
Autotest: tst_QLocalSocket::threadedConnection
Change-Id: Ibe823c006516acb27f51a06ca0bbe5555dbd88f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Not only is this extra if unnecesary - it is confusing.
oldSize is different from size.
(otherwise we would have returned less than 10 lines above)
Change-Id: Ie911414f679df2be7b5c8bc2670225d46e986b32
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no reason to find out where to update the headerview
if updates aren't enabled. Another approch I considered to skip the
whole calculation and just call update. I seriosly doubt that this
calculation and update of a particular QHeaderView rect will normally(*)
be faster than just updating everything.
However to be safe I have done the conservative fix.
(*) Normally but with many/fragmented spans in the headerview.
Change-Id: Ia812a747ee825653db0345cdc34f9d2f7155ea01
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes it easier to see the guts of the unix event dispatcher, and to
experiment with it.
Change-Id: I715bb68c4de6798e10bc55304a128b88e0249c63
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This field isn't used at all in qtbase, nor in any of the qt5
submodules.
Change-Id: If57d389935593f797818506a220c6a3cc04b6078
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits a6ae75f92a and
6f0f9f6928 were cherry-picked in the wrong
order (despite the dependencies shown in Gerrit), causing the
QObjectData::unused bitfield to be too large.
Change-Id: I65acaa8b507f7f6f2c5735f45bd0ad8343abea54
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The removed comment refers to a task in a bug tracker that no longer
exists. The comment also mentions making (part of) testlib use Qt's
regular binary compatibility mechanisms, which is desirable in the long
term but not in scope for Qt 5.
Change-Id: I6f23a9a2c8a84e30afe2aeb5c53ea93c25ba6f11
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This was an internal function that used to act like qsnprintf() but also
filtered unprintable characters out of the test output. The filtering
has been moved somewhere more appropriate and this function is no longer
used by testlib.
Unfortunately, the function was exposed in the public API due to its
former use in the implementation of a public macro.
In the unlikely event that any code outside testlib calls this function,
the call should be replaced by calling qsnprintf(), which comes from the
QtCore/QByteArray header.
Change-Id: Iddc17b4361d16ebddd19346ae7d1064951dd7738
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For some strange reason "Object::method ..." was printed, without
the leading Q.
Change-Id: I10b99e8aa8730e4020d15b3e04a01004bade76c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make it clear that the delay is applied before each key-click is
simulated.
Change-Id: Id100f1f2db1a5b1651c3046905719d7eb06ec1a0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Update the docs to describe the behaviour that resulted from moving the
traditional Qt widgets into a separate library from the rest of GUI
classes.
Change-Id: Ibd0ef05cc871b8f5a6700e421aa41bdf64c1210b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
After establishing that both lists are the same size, there is no need
to calculate the minimum of the list sizes. Also, use sizeof() instead
of hard-coded values when calling qsnprintf().
Change-Id: I2396cf3f941770229e1cef6422aeddbe549c51fc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Like in commit 5341cf7831, do not enable
warnings when building V8 code.
Change-Id: I447db52d546b50aea1c3afc88db7ce6923a5e310
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
QCocoaWindow now gets resize events from QNSViev
and does not require a NSWindow. QWindow instances
can now be inserted in NSView hierarchies. This is
useful for Qt-as-a-plugin use cases and is needed to
implement QMacNativeWidget for Qt 5.
Change-Id: Ia95ea9c22a15a3e62d1e6543466cff07390c70a2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
For each QDialog-derived class, introduce a Q[X]Options class
containing the options of the dialog. An instance is shared
between the QDialog (or dialog desktop component) and the
helper.
Change-Id: Ibabf508a4b9eaea25615638a47a4c1b8f93c019e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
I have been a bit confused about what QHeaderView::ResizeToContents
does good. It only sizes depending of the visible part.
However in hide it goes crazy and checks calculates size hints
for every row. At first I considered to solve it in QTableView.
It could be made to calculate the maximum height of the maximum
screen - however I decided not to touch it since I was not
certain that it wouldn't have any unexpected side effects.
Therefore I instead made this patch which is more simple and seems
to be safer. The logic is that when a QHeaderView is hidden we actually
only want to recalculate sizes if the headerview has a visible parent.
Task-number: QTBUG-14234
Change-Id: I186ab6afa95aed43022f2bb7c36e3fd008355d9b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The duplicated hash tables in QGuiApplicationPrivate and
QApplicationPrivate are now unified into one single hash table in
QGuiApplicationPrivate. This also reduced the number of lookups.
The extra processing needed to keep the touch points' first/lastPos
values in sync is now done only once, in QGuiApplication. This
eliminates the performance penalty (for widget-based apps) that was
introduced during the QPA migration.
As an added bonus the patch adds support for touch events arriving
simultaenously from multiple devices. This was broken before: As there
is no guarantee that two devices/drivers will not send touch points
with the same ID, using structures with only the ID as key is
wrong. The proper key is composed of the device ID (that is, a
QTouchDevice pointer) and the touch point ID.
The exported internal function qt_translateRawTouchEvent() has been
removed. This function cannot work properly in the QPA world: It
injected touches into the widget subsystem (QApplication) only which
is wrong, and would result in half-filled touch events due to not
routing the injected data through QGuiApplication. Autotests using
this function are migrated to
QWindowSystemInterface::handleTouchEvent().
Change-Id: I7632781d77f9e0ac4626fd7c9933511c94492156
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It was not a proper reimplementation of QPaintEngine::drawImage(), which
takes 4 arguments, not 3 as declared in QAlphaPaintEngine. Remove the
code, since it is not being called.
Change-Id: Ia125a9c7e8a2e05ec2ca11b859c01ccbf4d55af5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The documentation stated that QStringList objects would be compared
starting from the end of the lists. The implementation in qtest.h
actually starts at the beginning of the list, and always has done since
qtestlib became part of Qt.
Change-Id: I056f584564d46402ba23fc6a89c801cb5c3c6262
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Silence "deprecated" warnings. Use the old API
on 10.6.
Change-Id: I0cfa3a083108618023b491589a85ddfc268f990b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
When starting new animations with existing animations running, ensure
we force an update to the timer first, so that the new animations can't
mistakenly start with a very large delta.
This fixes tst_qdeclarativeanimations::alwaysRunToEndRestartBug failure
on slow machines.
Change-Id: Ida4e5dcf0ff792e6bfe0d244b6e969d04d0b20fa
Reviewed-by: Martin Jones <martin.jones@nokia.com>
From Qt4.7 on, the contextmenu of
QTextEdit/QPlainTextEdit/QLineEdit/QLabel/QMainWindow etc using
QMenu::popup() instead of QMenu::exec(), but the
setAttribute(Qt::WA_DeleteOnClose) does not work, as QMenu::close()
isn't called when the menus disapper. And this causes a memory leak.
This is a side effect of b7af368e86874d71ffc9071c9ef009814d6a3467
Task-number: QTBUG-22817
Task-number: QTBUG-19592
Change-Id: I4c2c3edb3f63ce914b7b57cd0fbcec20488c8315
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Finish the work started by commit
beb72b2fbf. This silences warnings found
by -Woverloaded-virtual.
Change-Id: Ic6f5e77e324463ade8349f23f272b41b509d87e4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Avoid generating paths for the parts of the text that are outside
the viewport in the raster paint engine.
Task-number: QTBUG-22687
Change-Id: I06159bc4c1aa82a07606f4b2f0336cb25dfd56d2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Dereference of the parent argument did not check for nullptr. For
example, the hellogl example would crash. Now if the parent
argument is null, the screen's root window is used.
Change-Id: Ib06181c9ab9794d577722f1c1dd5ee92e4edaee5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
If passed an empty string, QAbstractTestLogger::outputString() would
crash, so add a QTEST_ASSERT to make the cause of any crashes more
obvious.
Change-Id: I00afe2e73120b87e211f858402d441f345dddd08
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These two parameters were written in the opposite order in the
function's declaration and definition. Harmless to the compiler,
but confusing to developers and reviewers.
Change-Id: I1d4cb0a41b465b5f918daa76756677fe0cfe0a59
Reviewed-by: Jason McDonald
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Calling stop from restartAnimationTimer was incorrect (it was initially
added as a fix after the introduction of QAnimationDriver, but this is
a better location for the fix).
Change-Id: I2507096b846ada061e36a9ece6aa814d801ddd53
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The animationTimer is now only used for pauses, so can be renamed to
pauseTimer, and directly queried for whether it is active.
Change-Id: I3d9319b6ee76158e875ab43657126a0aa0a1cf2e
Reviewed-by: Leonardo Sobral Cunha <leo.cunha@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
If both a stop and start happen within an event loop, ensure they are
processed in order.
Based on a patch from Charles Yin.
Task-number: QTBUG-22865
Change-Id: I6131bd43a6ba5ad4fa37c863a9f4598bf2ac0e01
Reviewed-by: Leonardo Sobral Cunha <leo.cunha@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
To avoid getting
qxcbconnection.cpp:89:29: error: ‘Display’ was not declared in this scope
Platform linux - configured with
./configure -nokia-developer -nomake examples -nomake demos -nomake tests -no-gtkstyle -no-v8
Change-Id: Ief7315bb8aa67c6454cdeddb1c02e60ea79801b5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
There's no need in using a QList here, since it's never passed around anywhere;
the reference counting is just unnecessary overhead.
Change-Id: I92107c69f7338acc396e2ac4a69123c6a2becaed
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QApplication::type used to be static and set by the
QApplicationPrivate constructors.
In QCoreApplication we have the new application_type that should take its place.
QApplication::GuiServer is deprecated (since it doesn't have any functionallity
any more with QWS being removed).
This change prepares QStyle to be called from a QQuickCanvase based application
that does not inherit the QWidget version of QApplication.
Change-Id: Ifbe992e25f1e5821fa047b6eb915f75fa675ab97
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
A common error for developers attempting to build qtbase for the first
time is to miss cloning the v8 submodule.
Let qmake check for existence of the sources so we get a sensible error
at qmake time, rather than a relatively inscrutable error at make time.
Change-Id: I70b478e63c962263dac4f2ddccb377b4c9777ceb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Unlike keyPressEvent(), mousePressEvent(), etc. the touch events had
no equivalent so one had to fall back to reimplementing event() or
using an event filter. This is now corrected by introducing
touchEvent(). Touch events are finally becoming a first-class citizen
in Qt 5.
Change-Id: Ia2044030154fd5b1b5384f08a3cb1749b798435f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: I381873449b1520152cd2a7aede9c7253e110ef7a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
A couple of cases where we call Cococa APIs without
having an autorelease pool in place surfaced after
removing the global autorelease pool in 1a218a7.
(This happens when when Qt API is called before
app.exec() has started the Cocoa event loop.)
Add local autorelease pools to prevent memory leaks.
Change-Id: I0c4be3ff102aaff4539235857f95ab29fdbc9d70
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
This also adds a unit test for length()/count()/size(), since there wasn't one
testing it explicitly.
Change-Id: Ifb7f113aa97beef5f76e5fb246eb38495344b0ad
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marco Schmidt <Marco.Schmidt@Taugamma.de>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
These aren't used, and so they shouldn't be there.
Change-Id: Id4a08d90836c45c140d811b8eca07756e14c56e5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
.. as it is declared and defined in .cpp file but never used.
Change-Id: I7b72daf62712b4ec25717afbe2b7f0792ffa2a85
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Re-add pixmaps that were removed from QGuiApplication.
Change-Id: I9936da115e494cf816116159419d40840176afd5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Return the QMimeData set on the Ole object if we own it.
Change-Id: I08de0968e04a7356fed1255feb495f7b85e7a6f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The QRasterPaintEngine::updateState() is not a reimplementation of
QPaintEngineEx::updateState(const QPaintEngineState &state). Rename the
updateState() function to updateRasterState(), and ensureState() to
ensureRasterState(). These names were chosen to match the class name
QRasterPaintEngineState on which these functions operate.
../../include/QtGui/5.0.0/QtGui/private/../../../../../src/gui/painting/qpaintengine_raster_p.h:271:10:
warning: 'QRasterPaintEngine::updateState' hides overloaded virtual
function [-Woverloaded-virtual]
void updateState();
^
../../include/QtGui/5.0.0/QtGui/private/../../../../../src/gui/painting/qpaintengineex_p.h:202:18:
note: hidden overloaded virtual function 'QPaintEngineEx::updateState'
declared here
virtual void updateState(const QPaintEngineState &state);
^
Change-Id: Ie9ff0230019b383d53757029c6b2194dfc6a2664
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QPaintEngineEx declares several virtual clip() overloads, but clip()
with no argument does not reimplement any of these. Rename it to
clipData() (to make the name of the return value more closely).
../../include/QtGui/5.0.0/QtGui/private/../../../../../src/gui/painting/qpaintengine_blitter_p.h:104:29:
warning: 'QBlitterPaintEngine::clip' hides overloaded virtual function
[-Woverloaded-virtual]
inline const QClipData *clip(){return raster()->d_func()->clip();}
^
../../include/QtGui/5.0.0/QtGui/private/../../../../../src/gui/painting/qpaintengineex_p.h:157:18:
note: hidden overloaded virtual function 'QPaintEngineEx::clip' declared
here
virtual void clip(const QPainterPath &path, Qt::ClipOperation op);
^
Change-Id: Ifd7c494e2c999d743216cfb4c27a9c3ccf66f2a9
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
When using "user@dns-domain" for NTLM authentication, the whole string
should be sent as the username, and the domain should be set to an
empty string.
The domain sent by the server is still reflected if the username
does not contain an '@' character.
Manually tested using MS IIS on a domain-joined PC.
Task-number: QTBUG-19894
Task-number: ou1cimx1#949951
Change-Id: Ie1f81172e71cb7cce7b8c909062be990c24aea47
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
If NTLM authentication is required for the URL with an empty path,
then QNetworkAuthenticationCache::findClosestMatch(url.path()) returns 0.
e.g. "http://10.1.2.3".
Return a default constructed credential in this case.
Change-Id: I84ad3b308ee3f74fbbac9ad0f11dbdc66047b50b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
If QT_GUI_PASSWORD_ECHO_DELAY is defined in qplatformdefs.h with an
integer value in milliseconds, QLineEdit and TextInput will display
the last character entered unmasked for that delay period and then
mask the character as normal. If QT_GUI_PASSWORD_ECHO_DELAY is
not defined then the behaviour is unchanged.
Task-number: QTBUG-17003
Task-number: QTBUG-20719
Reviewed-by: Martin Jones
(cherry picked from commit f9e7aee2019d321edd655bfde7de43f20a106971)
Change-Id: If69b384636e3775ad7898b8ffc441011c21abe98
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
emitCursorPositionChanged won't emit cursorPositionChanged if the
cursor position hasn't changed but that doesn't mean the micro focus
hasn't changed, so emit updateMicroFocus changed when
cursorPositionChanged isn't.
Task-number: QTBUG-21017
Task-number: QTBUG-21011
Task-number: QTBUG-20719
Change-Id: I86344621151dbeba0eebc67fbc786a8da76b7021
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
QTextControl's word selection will only include a word if the cursor
position is past the mid point of the word. This can make it
difficult to select words near the edges of the screen on touch
devices. For the TextEdit word selection mode select a word ignore
the relative position within a word.
Task-number: QT-5206
Task-number: QTBUG-20719
Change-Id: I77e71e01d8021d66ada785cf894ba876faccefdf
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
For some reason the primary bit has previously been encoded in the
touch point state, even though it has nothing to do with the regular
states like Pressed, Released, etc.
The value is now stored in the recently introduced flags member of the
touch points. This also reduces the need for error-prone internal
masking of the state value.
The structure used by QWindowSystemInterface::handleTouchEvent also
becomes cleaner because the primary status can now be set in the flags
member and the isPrimary bool can be dropped.
Change-Id: I1da2cb99154afd97e1e3a5943ab115cae3a8232f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Even though it is stated in the documentation that the SQL driver must
remain valid during the life time of QSqlQuery, there are users who don't
follow the rule. It's common that the destructor of QSqlQuery is called
after the driver is already deleted. This fix checks the validity of
the SQLite driver before QSqliteResult uses it in destructor.
Task-number: QTBUG-16967
Change-Id: If0f52113f12e14102da1671cd6e12bdaa267114f
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The overload is used in Qt Creator
(see src/libs/extensionsystem/pluginmanager.cpp).
The use case here is an application whose internal
QObjects can be tested by passing a command line parameter.
For this use case, it is inconvenient to have to allocate
memory and create a char argv[]- array.
This reverts commit ad80d42f8e.
Change-Id: I2a2f91e2840100fd62743f6d03b33005d67b18f8
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This option does nothing -- the only function that checks if the option
has been set is never called. This appears to have been the case ever
since testlib was imported into the Qt repository in October 2005.
Change-Id: I837aa957e2d8bd47c3d1c551f1b94d4374daa25e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
After the previous commit, QTest::qt_snprintf() is equivalent to
qsnprintf(), so just use that instead.
Change-Id: I89ad6e3749ba5efb1926b0b618a904e8baca9f52
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove the part of the definition that applies to gcc versions <= 2.x
as these versions are not supported by Qt5.
Change-Id: Icee6b51ffe78fa30fd7193ef96b6ce0484b8fcae
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, unprintable characters were filtered out of test output
while the output strings were being formatted by either qt_snprintf() or
qt_asprintf(). Any strings not formatted by one of those functions
weren't filtered at all, and any strings passed more than once would be
filtered more than once.
This commit separates the filtering of output strings from their
formatting, leaving the filtering until just before the strings are
written to the output stream. For now, the filtering is done by a
protected method of QAbstractTestLogger, but this could easily be
changed to a virtual method in future to allow different filtering
for loggers with different output character sets.
Change-Id: Ia4bb49cd10d37c84af75d2cf58325d27f0e16d99
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The union in QObjectPrivate of declarativeData and
currentChildBeingDeleted shouldn't use wasDeleted to determining the
meaning of the unioned pointer. Instead, add
QObjectData::isDeletingChildren, set that in
QObjectPrivate::deleteChildren(), and only use the
currentChildBeingDeleted member when the parent's isDeletingChildren is
set.
This solves aborts seen in autotests when widgets are deleting window
children. The abort comes from QWeakPointer on the parent in the child's
close event handler (the abort checks that wasDeleted is not set).
Change-Id: I1a58449159d4a5312aad8ba12e559d05d6c43d93
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The name of an enum was slightly misspelled in the API docs, so lets
make sure its now copy-paste friendly.
Change-Id: I5da5230ab29743b63bf238a379891c98ac9d5039
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thomas Zander <zander@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QWidget *widget() is replaced with QObject *target().
Change-Id: Ib2c860480764410cf1527662e89f352ff688b32a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Requiring platform and generic plug-ins to pass TouchBegin,
TouchUpdate, or TouchEnd is unnecessary. The type can be easily
deduced from the touch point states. In fact handleTouchEvent already
collected the combined point states, it was just not utilized until
now.
Change-Id: Icf3c787fefdebc51609a763bc4286c18a0b6aac2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QPlatformCursor::pos() is a const function, the reimplementation should
be as well.
Change-Id: I7e37e41086e3b329dc31ebc060fcb0915771d884
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The capability flags indicate which information is valid in the touch
points. Previously there was no way to tell if e.g. the value returned
by pressure() is actually the value provided by the driver/device or
it is just something bogus due to pressure not being supported.
The points' flags return information about the individual touch
points. One use case is to differentiate between touches made by
finger and pen.
Velocity, if available, is now also exposed.
Each touch point can now contain an additional list of "raw"
positions. These points are not reported individually but are taken
into account in some way by the underlying device and drivers to
generate the final, "accurate" touch point. In case the underlying
drivers expose these additional positions, they are made available in
the lists returned by the touch points' rawScreenPosition().
The raw positions are only available in screen coordinates to prevent
wasting time with mapping from global positions in applications that
do not use this data. Instead, apps can query the QWindow to which the
touch event was sent via QTouchEvent::window() and can call
mapFromGlobal() manually if they need local raw positions.
The capability and device type information is now held in a new
QTouchDevice class. Each touch event will contain only a pointer to
one of the global QTouchDevice instances. On top of type and
capability, the new class also contains a name which can be used to
differentiate between multiple touch input devices (i.e. to tell from
which one a given QTouchEvent originates from).
The introduction of QTouchDevice has three implications: The
QTouchEvent constructor and QWindowSystemInterface::handleTouchEvent
need to be changed (to pass a QTouchDevice pointer instead of merely a
device type value), and each platform or generic plug-in is now
responsible for registering one or more devices using the new API
QWindowSystemInterface::registerTouchDevice.
Change-Id: Ic1468d3e43933d8b5691d75aa67c43e1bc7ffe3e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
No need to crash here, just warn.
This will happen when asking a table for out of range indexes.
Change-Id: Ida83604bd587390a3b54fbed68f98dab8038c757
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The last reference to this file was removed in commit a2337f79.
With the new QPA architecture there is no longer a reason why this
should be needed in qtbase.
Change-Id: I84765eca066fd6bdd1dabac32e866c58a39fe183
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Symbian-specific code was removed as a side effect of the merge.
Change-Id: I01d28b2aa2fef16ce3988382c2b2a0436c46227c
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This one was far to long lived and would delay
releases until application shutdown.
We might get more "no autoreleasepool in place"
warnings now, these should be fixed by adding local
auto release pools.
Change-Id: Ia7a46ab05fb1937154997d0c47b8899d2a0cef65
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
This is needed in order to expose the enums to qml.
Do not inherit QAccessible.
Change-Id: I220a0ea3add2d790e4fa6e93ce3deda762859e1a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Some people like to build their Qt-based projects with -Wshadow
-Werror, and since qobject_impl.h is included from a public Qt
header, their build breaks.
Change-Id: I5d8a5ee1937092149a18c0ff66a723f5bfc9ffc3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The overload of QTest::qExec() that takes a QStringList is not used
anywhere in Qt's autotests, despite having been in the qtestlib API
since Qt 4.4.
This lack of use most likely derives from the fact that none of the
QTEST_MAIN macros use the overload, and more than 99% of Qt's tests
use those macros to avoid explicitly calling QTest::qExec().
Change-Id: I264b21d7fe1a9f2d565f748cf8bbe32414a73bb0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This malloc-replacement library is marked experimental and disabled by
default. It is also Unix-only.
On linux (GNU C library, actually) ptmalloc graduated to become the
native allocator, according to its webpage (http://www.malloc.de/en/),
making the need to have a copy here significantly lower.
Anyway, there is nothing preventing interested parties from adding this
library to their own setup and very little value in keeping it around in
qtbase.
Change-Id: I2b1c798ca38b59bb767b44d6e5190080ec6ecdf4
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The downloadBuffer size should not be larger then the
downloadBufferMaximumSize. I also added a try catch for the allocation
incase we are low on memory, so that we don't crash.
Task-number: QTBUG-23040
Change-Id: Ib9820bc19fc5db994ede20f123f8c167a8d43ff7
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Which currently causes tests not to compile on Windows
due to missing symbols in QtWidgets (QSound::QSound() ,etc).
Change-Id: I87f0a403e61c3a67f9a758f114e33db1012e33e8
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The docs say this is required, but we don't check it and instead
segfault right now.
Change-Id: I825b00a312a481c5383af127333c0c4698188348
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
If context creation fails, try again without a shared context. Added
QPlatformOpenGLContext::isSharing() and
QPlatformOpenGLContext::isValid() to propagate whether the platform
context was successfully created with or without sharing.
Change-Id: I37080b645f531fd207946441057be6d3f6be3f6e
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
QXmlStream was moved from QtXml to QtCore for Qt 4.4.
Remove all the hacks that we added to support that move
in a binary compatible way.
Change-Id: Iea348e980b8efce322d5a7510e5b3ab5c3a108ce
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Forward port of fix for http://cmake.org/Bug/view.php?id=12554
Test fails before and passes after.
Change-Id: I7a3ab2369cb3095c63f9e2a3e604088ebdcc2465
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QDirectFbScreen needs to have the full QDirectFbCursor definition, include
the header file directly instead of a forward declaration.
Impelement QDirectFbWindowEGL::eglSurface to return the EGLSurface of the
underlying DirectFBWindow.
Change-Id: Ib6765331ffea6e0b5f10f738d9e05320b7f8155f
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
During shadow-building it was noticed that executing make install
did not actually build mkv8snapshot and therefore caused an error.
Change-Id: I126cdbaffb85170e25412b93bc99af79ac6f4642
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Change-Id: Ia7bf5046420ee8f2d690d098937a212eb75b07ce
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I4746ed5ba41fba801599f443d1214e1744807e20
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Most embedded GL chips support 24-bit depth with packed
8 bit stencil, but more rarely 32-bit. Asking for 32
bit means we often fail on other properties to, such as
multisampling.
Change-Id: Ib913d94af0635b09913ff15cff54cc694ba293fc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Previously, autotests silently ignored the -graphicssystem and -qws
parameters so that test-runners did not need to include logic to decide
whether to pass those parameters depending on whether a particular test
was a GUI test or a non-GUI test.
In Qt 5, both of those parameters have been removed from QApplication,
so tests don't need to ignore them anymore as they should no longer be
supplied to any test.
Change-Id: Ic59e38ddfa3303e760645ed1782a211340ce70f2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QT_DEPRECATED is defined by default by the logic in qglobal.h, but
QT_DEPRECATED_SINCE is evaluated before that definition, making
QT_DEPRECATED_SINCE evaluate to 0, disabling all deprecated code (even
though it shouldn't be disabled).
Fix this by moving the QT_DEPRECATED_SINCE evaluation to after the
evaluation of QT_NO_DEPRECATED and/or definition of QT_DEPRECATED, to
ensure that QT_DEPRECATED_SINCE works as expected.
Change-Id: I57d9f6a3e1859b0057fd4f37bcf2d2cc3dfba230
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is needed by QtScript, so we need to keep it for now.
Change-Id: Iee6bd7daf7e86a09242523f5aca72ede413a6981
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Copy and paste the ARM code into the MIPS dir, there is no lithium
support in MIPS right now.
Change-Id: I21491d36da2a4ac4cb6898c47b0e5bd37a733b41
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
