In the justification code, we unconditionally subtracted one
from the line_length, but then compared the result to 0 afterwards,
so we did not support when the line_length is 0 initially, which
can happen if it only consists of spaces (in which case
trailingSpaces will be non-zero and line_length will be zero.)
The fix is to bail out for both strings of length 1 and length 0.
[ChangeLog][Text] Fixed an assert when justifying a QTextLine
which only contains spaces.
Task-number: QTBUG-38520
Change-Id: Ib04993f47eb2f9f7fc49c4a5400f18f9682a72f2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The plain text edit's smart repaint logic in
QPlainTextDocumentLayout::documentChanged assumes that during a change inside
just one block, the block is in the state before the edit and a call to
layoutBlock() is going to bring it up-to-date. Then only a comparison of the
bounding rect - before and after - is going to allow for smart repaints.
The assumption of the layout being in the same state as before the edit got
broken by commit cc57a2e90f, which introduced
code to use a QTextCursor within a slot connected to QTextDocument's
contentsChange signal. The usage of the QTextCursor there ends up updating the
layout of the block ahead of time, breaking the assumption and therefore the
optimization, in the sense that during changes in the preedit that cause a
change of height / line count, the old bounding rect in
QPlainTextDocumentLayout::documentChanged and the new bounding rect will be the
same. This causes a repaint of only the edited block, missing repaints of the
following blocks, even though the line count effectively changed.
So what's causing QTextCursor to mess with the layout is the attempt of
updating the vertical movement x property. This patch inhibits the update,
marking it as dirty for initialization later. This means that slots connected
to this low-level signal cannot rely on the cursor's visual x position, but
that doesn't seem useful anyway and isn't required for commit
cc57a2e90f.
Task-number: QTBUG-38536
Change-Id: I5fae12d646a4b2d2cc22b9f2d021e5dc8cfdda94
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
On QNX a window can only be activated if it has either a egl surface
or a raster backingstore.
Change-Id: If075093e39f1553eb8b25e35f7d372b1b15aa8af
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Make it closer to the Unicode specs (UAX#24):
* Common now inherits the preceding character's script, if any;
* In a combining character sequence, if the base character is
of Common script, the entire sequence is treated like if it were
of the first non-Inherited, non-Common script in the sequence.
See http://www.unicode.org/reports/tr24/tr24-21.html for more details.
[ChangeLog][QtGui] Fixed regression in arabic text rendering.
Task-number: QTBUG-28813
Task-number: QTBUG-29930 (related)
Task-number: QTBUG-35836
Change-Id: Id85761965b08ca94c674d5f3613fe58b82b2ce9c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Ahmed Saidi <justroftest@gmail.com>
For AAT shaping support, we need either the pre-QPA shaping trick
or the new HarfBuzz on Mac; prefer the latter.
Disable some test cases aimed to test the HB-old behavior; enable ones
that should guarantee shaping-unaware behavior.
[ChangeLog][OS X] Use CoreText text shaping engine for support of
complex scripts. If required, the shaping engine used in previous
versions can be preferred by configuring Qt with -no-harfbuzz.
Alternatively, the QT_HARFBUZZ environment variable could be set to "old".
Task-number: QTBUG-18980 (relates)
Task-number: QTBUG-38246
Change-Id: Iee6fe4f5bc047e77259182b8585385c5febd02b3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
In tst_QEvent, add a check that exhausts the available event type ids and verifies
that registerEventTypes() returns -1 in that case, as documented.
I haven't found a way to test the other case in which -1 is returned.
Since this test operates on a global write-only registry the new test case needs
to keep track of whether the earlier test cases have run successfully. If they
didn't, skip this test case.
Change-Id: I68ea9d17d10dcec22175994aba269dd09c9adf43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A test for a hint > QEvent::MaxUser was missing.
Added.
Change-Id: I00c1c45f6673f35d4203df15b4ffc35f57273e46
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The calculation of the width/height required for the
scaling algorithm was prone to floating point rounding
issues, where the lower value got rounded down, the higher
one rounded up. This could lead to a situation where we
iterated over one more line/pixel in the line than we have
in the source image.
Correct this by passing the dimension of the source image into
the function and bounds checking the values before iterating.
Task-number: QTBUG-35927
Change-Id: If44b2235a479224660d508a0504fec40d724763a
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
We don't support xlfd fonts anymore and indeed QFont::setRawName()
is an empty method.
[Changelog][QtGui] QFont::setRawName() and QFont::rawName() are
deprecated.
Change-Id: Ic52d42a9bc200ba8b246dd4e28c77f84e086dad5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This patch fixes an issue when a font that was added with
QFontDatabase::addApplicationFont can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont
adds the font to the FontConfig application set from where it
cannot be removed any more and is picked up every time the font database
is repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does
not fail on linux, because it tries to add "FreeMono" (which in most
cases is already there as a system font). So this patch removes FreeMono
and adds LED_REAL as test font.
Change-Id: I70fc823075923aa426da1eb3e052affcc416e399
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
On QNX a actual platform window is not created unless the window is explicitly
postet (raster) or a swapBuffers (opengl) is executed.
Change-Id: Ia06b97ea1a477d59e78d74d895c5d6ba6dd86edf
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The text shaping process has been unified for all platforms.
Task-number: QTBUG-23064
Task-number: QTBUG-24565
Task-number: QTBUG-26495
Change-Id: Ida4c4be85f1a72c04399d2e6760fa36b33a0464e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QQuickWindow depends on maintaining state of known touch points
between events, so it needs to be notified when it will not be
receiving the corresponding release event for one or more.
This temporary fix needs to be reverted when we have a proper
event forwarding solution.
Task-number: QTBUG-37371
Change-Id: I5dc40af6feac425be8103c1586f8ebe3a6aad20d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Add support to QPdfWriter for QPageSize, QPageLayout, and resolution.
[ChangeLog][QtGui][QPdfWriter] The QPdfWriter now supports setting
the PDF orientation, layout and resolution by using QPageSize and
QPageLayout.
Change-Id: I9c269f997ec540dac1989f355c6a2e7488947966
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
New QPageLayout to encapsulate page layout details including page size,
orientation and margins. Scale may be added later.
Subsequent changes will use this class in the paged paint devices,
paint engines, print engines, and print plugins to replace multiple
inconsistent local implementations.
[ChangeLog][QtGui] Added class QPageLayout to support handling page
layouts including the page size, orientation and margins.
Change-Id: Ife1ddd6c2a8d1516542be2eb37425111f41cd5c7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
New QPageSize class to encapsulate paper sizes and names to ensure all
sizes and conversions are consistent and match the Postscript standard
sizes.
Subsequent changes will use this class in the paged paint devices,
paint engines, print engines, and print plugins to replace multiple
inconsistent local implementations.
[ChangeLog][QtGui][QPageSize] Added new QPageSize class to implement
Adobe Postscript PPD standard page sizes. This class supports the
standard page sizes, names and keys from the PPD standard, and provides
convenient size and rect conversion methods.
Change-Id: Ie2c8be0c3df0d29ac5da4cd9877ad41d0982633c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Verify that QOpenGLContext works with QWindows that
do not have an explicit size set.
Task-number: QTBUG-35342
Change-Id: I91be7beb0062c5825fc58273c701c396b6423256
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
by default QT contains both core and gui already
Change-Id: I6f5b551104e40a024468e7cb62e302134e9472ec
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
drawCachedGlyphs draws with the wrong color on RGBA8888. The issue
is that the draw routines bitmapblit_quint32 and alphamapblit_quint32
while safe to use on rgba formats, needs to have the input color
converted.
This patch adds small wrapper functions for bitmapblit and alphamapblit
that converts the formats. Two tests are extended to ensure we have
test coverage.
Change-Id: I5f99f3795eba46a69d4df5b167e6099024e9a060
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This reverts commit a4ff400e25.
The patch caused a regression for bold fonts which is currently
blocking the alpha of Qt 5.3, so lets revert it and try
resubmitting a fixed version later to avoid delaying any release.
Task-number: QTBUG-36929
Change-Id: I8d474b09b2270eb2f861853e60605429be08e2d9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Commit f4dd534 introduced a regression, so that QFontMetrics reported
a wrong size (to be more specific width) for FreeType fonts.
The calculation of glyph advances has to to reflect (rounded)
integral number of pixels. This was only done when the glyph was cached.
So in some cases the first call to QFontMetrics::size gave a different
result than the second.
This patch reverts f4dd5344fb.
The tst_QFontMetrics::same auto test only happened to work on some
platforms, on BlackBerry for instance it did not. Extended the test
case to make sure it works for different font sizes.
Change-Id: Ia5bb9abd3ff98193c9bba048b85207672ed8d9c3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
-title disappeared between Qt4 and Qt5, due to all the refactorings around QPA.
Making the caption of the mainwindow configurable allows custom setups
for specific users or use cases.
[ChangeLog][QtGui][QGuiApplication] Restore support for -title command line
argument on X11, add -qwindowtitle on all platforms.
Change-Id: I73e6bf21248f3419178eba583b257172a175e74e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The RGBA8888 formats was incorrectly using the qt_gradient_quint32
which is argb specific. This caused vertical gradients but only
vertical gradients to be drawn incorrectly.
This changes the RGBA8888 formats formats to use the generic gradient
method and renames qt_gradient_quint32 to qt_gradient_argb32 to
indicate its limitation.
Change-Id: Ia1cd48ca7f4f78b64f31d6263e81cd8ac3b0954e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This fixes the following case:
<blockquote>
<span />Foobar
</blockquote>
Qt would see the end of <span>, and consider the current block
tag as closed, thus resetting the block format, thus losing the
margin set for the current block (due to blockquote).
If you do
<blockquote>
<span>Foo</span>Foobar
</blockquote>
instead, then the same would not happen, since hasBlock is set
to false when we append text to the current inline node.
[ChangeLog][QTextDocument] Add support for empty inline elements
in block tags.
Task-number: QTBUG-33336
Change-Id: Ic566edfec96cb8d44d1c02932bb195bc921d1580
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This makes the font merging possible and solves an issue
with the default font properties inheritance when used
in conjunction with QTextFormatCollection.
Change-Id: If8b543c011122dde9f086f5d696df3b042f7b90c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
...and thus consume 4 bytes less per glyph and increase the performance a bit.
It seems, the only CTFontGetAdvancesForGlyphs() returns both x and y
advances, though y advances are always equal to 0 for horizontal
orientation and x advances are always equal to 0 for vertical orientation.
Also, rename `advances_x` to `advances` for consistency
and declare QGlyphLayout's data size in a single place.
Change-Id: I56b20f893f8a6feb7aa870e3edbca99dd93ba2e2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Currently QImage::pixel() returns the raw underlying pixel values for
RGB32. For all other pixel formats the returned value is either valid
ARGB32 or ARGB32PM.
This patch masks the undefined alpha field in RGB32 so that the return
value is well defined QRgb. It also fixes one test that relied on the
previous behavior.
Change-Id: If37463528268b7419733499d1f7bfd0d1097d21e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Currently INV_PREMUL rounds strictly down. While PREMUL rounds evenly.
This patch adds 0x8000 to the intermediate results in INV_PREMUL before
right shifting, thereby achieving even rounding.
The rounding also makes PREMUL(INV_PREMUL()) into an identify operation,
which means we can safely convert ARGB32PM to ARGB32 and back without
ever losing color details. A test is added to verify this.
Change-Id: I1267e109caddcff0c01d726cb5c1c1e9fa5f7996
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This patch adds tests for the consistent handling of transparent
drawing results on opaque formats that was introduced with commit
6f7d370ade
Change-Id: If5d11d0f2e111ef88490a4dc20a64b0858ad5426
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This patch fixes an issue when a font that was added with QFontDatabase::addApplicationFont
can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont adds the font to the FontConfig
application set from where it cannot be removed any more and is picked up every time the font database is
repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does not fail on linux, because it tries
to add "FreeMono" (which in most cases is already there as a system font). So this patch removes FreeMono and adds
LED_REAL as test font.
Change-Id: I2fa5f4df0ad2099ac28673760ea25234c725dfc6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Add ref qualified versions of QImage::convertToFormat, so that a
temporary QImage can be converted in-place to a format of equal depth.
[ChangeLog][QtGui][QImage]Added rvalue qualified convertToFormat method
for in-place conversion
Change-Id: I2eed5ffd63f5aea4ffa1147bf7607b02a49d9c5d
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
