The deleteLater() call wasn't reliably reached when tests fail,
so use a QScopedPointer with QScopedPointerDeleteLater deleter.
Change-Id: Ica73bc73c2a0ac1e9b77e4804f2aedcad9b662a0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of 'true', it should be '-1'.
Change-Id: I5e8f99153da68d34b37477ef4cedbc447fba347f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
According to QLocalSocket's documentation, connectToServer() must
initiate a connection attempt after opening the device. Otherwise, if
a connection succeeds immediately, connected() signal will be emitted
on closed device. So, this patch ensures that TCP-based implementation
behaves correctly.
Change-Id: I4cc9474815e091a1491a429a6dc17f9cf0154f58
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While connecting, the socket goes through the HostLookupState. In
this state, the socket engine is not yet created, unless the socket
had previously been bound. When it has been bound, we should keep
the socket engine even if the user initiates a delayed close by
using the write()+close() sequence.
Change-Id: Iefebcb33cd72cb49617acbac8e02af9d8209c869
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise socketDescriptor(), localPort(), localAddress(), peerPort(),
peerAddress(), and peerName() remain uncleared until close() is called.
This could take place when the connection is closed by the remote
endpoint or the user calls disconnectFromHost(). After disconnecting,
connection parameters are no longer valid, while I/O device is still
opened and may have pending data for reading. Usually, the user reads
all incoming data and closes the device independently.
Change-Id: Ic898851c39137faf64019949910f0d94ebb79df7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The file is read using CRLF line convention on Windows.
Task-number: QTBUG-24226
Change-Id: Ie08fa603e29c80a42de4bfbfd1f4237f53c22b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
This is the second attempt to remove 'insignificant' from UDP socket test to:
- make changes ending up in regressions more difficult (hopefully impossible) to merge
- switch to BLACKLIST if needed
- make flaky tests more visible.
For now this 'back to significant' will be accompanied by extended BLACKLIST.
New in BLACKLIST:
* OS X - datagram size-related problems (fixed in 5.7)
* OS X - multicastLeaveAfterClose - will probably stay BLACKLISTED,
seems to be a Darwin's quirk, can be fixed in OS X >= 10.10.
* windows ...
tst_QUdpSocket::echo seems to fail randomly on OS X/linux and
it looks like it fails at the same time on different machines,
should be something server-related (a guess only).
Change-Id: Ib344348ffab03fab1b9309b80449a04d8ce247c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a user's code, attached to sslErrors signal, calls abort/close
or disconnectFromHost but our SSL socket was configured not to verify a peer,
no need to continue handshake after calling checkSslErrors
(and finally crashing on invalid 'ssl' pointer).
Task-number: QTBUG-53906
Change-Id: I7f185511d278f9d6f16e7d6c5ba424707141459c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
protocolServerSide test fails with 'ssl3-any' and 'tls1.0-any' combo
on RHEL 7.2 with OpenSSL v1.0.1e-fips, it would work as OPENSSL_NO_SSL2
code-path, but OPENSSL_NO_SSL2 is not defined, so socket is in state
connected while it's expected to be unconnected.
Task-number: QTBUG-53608
Change-Id: Ib321b95129a6ab5b0691b40cb4acc612125633b2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
setEmptyDefaultConfiguration - this test (and this was stated explicitly
in comments!) must be the last test to run, otherwise, it can make subsequent
tests fail.
-exitLoop must be in 'protected slots' section not to be executed as a test,
since ... it's aux function, not a test.
Task-number: QTBUG-53608
Task-number: QTBUG-53603
Change-Id: I49d6d57ba927ecc4f20ae2d9325ad02fa46b0922
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A recent fix now makes
authenticationCacheAfterCancel(http+socksauth)
work again, so un-blacklist it.
Added a helpful comment while I was at it.
Change-Id: I2d7eae8d80c12957d22659a82e5072301735c41f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This reverts commit 11ad50074b.
Unfortunately, udpsocket strikes back this time on OS X < 10.10 -
never seens these test failing before. Since this prevents 5.6->5.7
merge, I have to revert it until the problem investigated/fixed on OS X.
Alas :(
Change-Id: I52f6512d88c25d2e3071cb845e91faefbd455e27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtNetwork][QAuthenticator] Fixed crash when
comparing a initialized QAuthenticator with an uninitialized
QAuthenticator.
Task-number: QTBUG-53338
Change-Id: Ib8b732b9c65c02ee542885e5d6fe9bd1589a6b1a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
BLACKLIST should make it, recent regression in QUdpSocket went unnoticed
(first) because of 'insignificant'. We'd like to avoid such regressions
in future (again, using BLACKLIST if needed and fixig the real problem then).
NB: BLACKLIST in this patch was extended to deal with previously unnoticed failures on
Windows and OS X. 'multicast' and related family of of functions on OS X
will probably stay like this (seems to be a Darwin's quirk), datagram
size related tests - fixed in dev or 5.7 (change is in nativesocket engine,
'bytesAvailable').
Task-number: QTBUG-52714
Change-Id: I039b05935a02983ce1648de449907dfa765f7db7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Follow-up to commit 6fd205d5: document which version of danted shall
make one work-around redundant, document that another work-around is
still needed even with that v1.1.19; and remove a comment that
referred back to an XFAIL that commit 6fd205d5 removed.
Change-Id: I270b662528127c82184bff20b3cecea4f0c41b41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QSKIP() causes the whole test to be skipped, where this work-around
for a known quirk of the test server only requires skipping a single
Q_COMPARE(); the rest of the test passes fine without it.
Change-Id: Ie4612bd428f4cb4b342fad908cc2784fbadf069c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use QFINDTESTDATA to find the socketprocess helper executable.
Now tst_QLocalSocket::processConnection() passes when started from Qt
Creator without adjusting the working directory.
Change-Id: I97ca3334a381b3cd646647487529bcd90b969528
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I0c94a5c2846b48c8aea7ffff1435b8a7ccbd4d9e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
According to RFC 2640, FTP uses UTF-8 encoding. Fix the conversions
accordingly.
Task-number: QTBUG-52303
Change-Id: I615199b3d074fc3861f25df113dda672525766b6
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter doesn't write in a separate thread
anymore.
Change-Id: Id978bfdfa2531be91cce94476ab9b0dff237bd61
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Commit 0307c008 removed the buffering of data-to-be-written from
QWindowsPipeWriter, because it was assumed that users of this class
(QProcess and QLocalSocket) already buffer data internally.
This assumption was wrong for QLocalSocket. The following sequence
localSocket->write(someData);
localSocket->write(someMoreData);
would not write anything on the second write.
Add a write buffer to the Windows implementation of QLocalSocket.
Task-number: QTBUG-52073
Change-Id: I6d0f03a722ec48138cbde3e2f69aae7dafe790d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
canReadNotification() could return 'false' if either the socket has
been closed, or the read buffer has reached the maximum size. Because of
this duality, waitForBytesWritten() should not fail as a result of a
canReadNotification() call.
Change-Id: I9a15fa174a3b982a7ce404913caa38fc19f64622
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Suppose a client connects while the QLocalServer is still in the loop
that calls addListener. The connection would SetEvent(eventHandle),
but every call to ConnectNamedPipe would ResetEvent(eventHandle).
Thus, the connection is never detected by the notifier on eventHandle.
Callers of addListener must check the connection state of every
listener to make sure that no client connected while setting up
listeners.
Task-number: QTBUG-49254
Change-Id: Ia961927ea76973708e6e3f73510695eb5d6a0e4c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In one code path the test checked for the emission of a readyRead()
signal without waiting for it.
This code path was never hit, neither on Windows nor on Unix platforms.
Change-Id: Ifbe464400a2a1ba8eab49bd60315289040e6bbde
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some embedded servers use LF to mark the end of an individual header,
but use CRLF to mark the end of all the headers. The GoPro WiFi
interface does this, as an example.
Change-Id: I227ab73622c84f439a6cf8703d020393c4d8bf69
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
The data function for this test re-used listenAndConnect_data that
has an additional column "connections" which was never used in sendData.
Thus sendData executed three times the same code which is just uselessly
burned CI time.
Copied the actually needed code of listenAndConnect_data to sendData_data.
Change-Id: I6cdb1c1b72cb4ce7be7c13e90eea30ac09a14914
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
