Add also a manual test application. For GLX there is an autotest since
that is likely to be run on one of the CIs. For EGL and especially
eglfs this is likely not the case so a manual test is better.
Task-number: QTBUG-37552
Change-Id: Ib09db5d909befb68d16f69abd401a56abe55f28a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Useful for any application that can take URLs on the command-line, so that
full paths and relative paths can also be accepted.
Change-Id: I8a2c50f36d60bdc49c065b3065972fd5d45fa12a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fact that we kick in a pattern study and possibly a JIT compilation
after an undocumented number of usages is suboptimal, for a number
or reasons: users may want to JIT compile a pattern immediately,
and at the same time they may not want a random delay in the program
(due to the pattern getting optimized at a random usage).
So: add an optimize() call to force an immediate pattern optimization,
and a pattern option to force an optimization on the first usage.
Change-Id: I95efdecfd31f11ca7cceb9c05037df613601a11c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On some platforms all windows are by default forced into fullscreen mode when show() is executed.
In QMdiSubWindow we cannot handle the fullscreen state and should ignore it. Otherwise
the window will be forced in "normal" state and ignore any previously
executed geometry changes.
Change-Id: I09ce6507a1eac6a0adb3405ca3f423642d30f801
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
[ChangeLog][QtGui][QGuiApplication] Add support for -icon command line
argument on X11, add -qwindowicon on all platforms.
Change-Id: Iacc602466699bf634d8b34aab7ed73c83fd9844f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Increase window size when verifying that the scrollbar disappears
when using a small font on Windows 8.1
Change-Id: I7d4520bc5882d8ccd59db3f5bff7e9d6d68a4827
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
On Windows, DataLocation currently returns the value obtained by
passing CSIDL_COMMON_APPDATA to SHGetSpecialFolderPath(). This is
the local non-roaming path. For actually storing settings, the roaming
path should be used (CSIDL_APPDATA). Introduce new AppDataLocation to
return that path and AppLocalDataLocation for the local path and deprecate
DataLocation.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths now has new
enumeration values AppDataLocation, AppLocalDataLocation to be able
to differentiate between roaming and local paths on the Windows
operating system. DataLocation is deprecated in favor of AppDataLocation.
Task-number: QTBUG-38483
Change-Id: Ib1de8c7031a863ed5eac10c747de6f7ff1a090c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When stripping the root path from a file name that cannot be found
in the model, use case sensitive comparison depending on
file system.
Task-number: QTBUG-38162
Change-Id: I28e28973fca2da35a5768fdd00cc258b9669a15a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
VoiceOver expects press to open the combobox.
Task-number: QTBUG-37922
Change-Id: Iee7b7974db097e4e2444202c703bd587e1576fe0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
When QSqlQuery::at() == QSql::BeforeFirstRow and seek(1, true) (seek to
next record) is called the expected result is go to first row.
When QSqlQuery::at() == QSql::AfterLastRow and seek(-1, true) (seek to
previous record) is called the expected result is go to last row.
But in all cases the first and last are skipped.
Change-Id: I584138b3d397ce1c790bf89688ee92289a99611c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
... because they are too unstable. We can check whether they are more
stable once the new network tests server is in place.
Task-number: QTBUG-38385
Change-Id: I5ced7cc1f89290812aa88f174a41965fd2ef7252
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change-Id: I2912dcca77270582f6e989b8b3fb72b82f6f70d6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
isES() becomes isOpenGLES(). The library type enums are changed
DesktopGL -> LibGL and GLES2 -> LibGLES. This removes the now
unnecessary version number, the confusing "desktop" term and provides
better readability.
The old function/values are kept until the related qtdeclarative
changes are integrated.
Task-number: QTBUG-38564
Change-Id: Ibb0a1209985f1ce4bb9451f9b7b093c2b68a6505
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Introduce QTRY_COMPARE to let the sorting finish instead
of a hard-coded time-out.
Task-number: QTBUG-29403
Change-Id: I813bf6bcfe7110f49a5b95db589ed8a3f559db89
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Use QTRY_COMPARE for dirChangedSpy, remove all unneeded
remove()/setPermission() calls (originating from the time
the test did not use QTemporaryFile), add more QVERIFY()
and messages for the other operations.
Task-number: QTBUG-30943
Change-Id: Ib3b78b1c6922539fd5e9238aa017fcdb554aacc8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
selectFile(): Ensure dialog is destroyed before the temporary file
to prevent leak.
selectFiles(): Introduce scopes to prevent co-existence of 2
instances of QFileDialog, which causes warnings from file watchers
and occasional crashes in accessibility.
Discovered while investigating:
Task-number: QTBUG-38414
Change-Id: I94d2bb3e05538416286641cb08a88d8b3837a8a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
And move the default argument from the deprecated constructor to
the new one
Also make sure that the error number is consistent across the
two constructor
Change-Id: I3721266b39ab493f0add35b2d1f892b2f6094992
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The SSE2-based conversion only kicks in with strings with 8 characters
or more in length.
Change-Id: Ic1daad0845571be03547553cc001d83550f0c89c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Commit 125bb81bef wasn't enough. Let's
just make it simpler and use a regular function.
Change-Id: I9627dedaa87873b4b138224afd182e4fd9a55265
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The ability to set a container to be unsharable has very little use and
it costs us an extra conditional for every refcount up and possibly
down.
This change is a no-op for current Qt 5. It shuffles a few things around
just so Qt can compile if you define QT_NO_UNSHARABLE_CONTAINERS. That
is done to ease the fixing of the code in Qt 6 and to make my life
easier: I'll keep that defined in my local Qt build so I can catch any
misuses of this deprecated API.
The newly deprecated methods are not marked QT_DEPRECATED because the
bootstrapped tools wouldn't build -- they're built with QT_NO_DEPRECATED
defined, which causes build errors.
[ChangeLog][QtCore] The setSharable() and isSharable() functions in Qt
containers has been deprecated and will be removed in Qt 6. New
applications should not use this feature, while old applications that
may be using this (undocumented) feature should port away from it.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: I789771743dcaed6a43eccd99382f8b3ffa61e479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
8dd47e34b9 removed the handling of the
BOMs but did not document it. This brings the behavior back and adds a
unit test so we don't break it again.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016532.html
Change-Id: Ifb7a9a6e5a494622f46b8ab435e1d168b862d952
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The "data" pointer became technically dangling after line 1866 did
copy = data;
as copy was the last reference to the original data. That made the
pointer address available to be reused by the system malloc(), which
sometimes happened, causing the unit test to fail.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016588.html
Change-Id: Ifa6a27bd53a6e60392b77a6609f2d47148695211
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For now only xcb on GLX is supported. Other platforms will follow later.
Add also some missing documentation for the platform OpenGL context factory
functions.
[ChangeLog] QOpenGLContext is now able to adopt existing native contexts.
Task-number: QTBUG-37552
Change-Id: I5dd959f102df178f646b2df5989203b5dc6de376
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Added the function pointer constructor to QSignalSpy to take advantage
of the new connect syntax.
Change-Id: I94218a096c677cdba73e1b2cfa8b9c09bc28145f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Its purpose in life will be to describe pixel formats
[ChangeLog][QtGui] Added QPixelFormat class
Change-Id: I74d8f974606520efb3935110ff3d6ddb5ea805a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
IteratorOwner pointer specialization was failing for void* because of
an invalid function overload.
Change-Id: I80355ddd2b871c1fa2fa5bf5a4ed8bc7768fc3c9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Revert 3bb9024952. That fix was an attempt
to handle the issue that has been fixed in 5.3 by
9063edef79 and should have been reverted
when the new approach, that restores Qt 4 behavior for widgets, was
introduced.
Task-number: QTBUG-38242
Task-number: QTBUG-36423
Change-Id: I8f8a82da22605fac90543492e9b2cd2b568544e7
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
These hooks only worked reliably with LD_PRELOAD on Linux/GCC, on other
platforms they depended on what exactly the compiler optimizer is doing
as well as some nasty assembler rewriting to actually access them. The
new system uses a simple array of function pointers that can be set to
custom hooks by tools that need this (based on ideas from Andre Poenitz).
This also covers qt_startup_hook (similar problem), and the Qt version
number that Andre had asked for.
Change-Id: I2c3e7950fd49b1b1d04176be34c2fff3293981b0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The comment shows to which string a QT_MOC_LITERAL is pointing.
Change-Id: Ia389d750b1b1c21e2242bad6beceea4f9298ff8e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Show translates to showFullScreen on some platforms. This patch
replaces show with showNormal in the "task248604_infiniteResize" test.
On BlackBerry the test is skipped because all top level windows are forced
fullscreen by the platform.
Change-Id: Ia974c3fcbd0c71c107f4cc3f8405b8ef79ffb5b7
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
On QNX a window can only be activated if it has either a egl surface
or a raster backingstore.
Change-Id: If075093e39f1553eb8b25e35f7d372b1b15aa8af
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
