It's a good practice to always replace bad UTF-8 sequences with the
replacement character. It could be considered a security issue too.
Change-Id: I9e7d72e4c4102cdb8334449b5e7f882228a9048f
Reviewed-by: David Faure (KDE) <faure@kde.org>
Those sections contain more than one components of a URL, separated by
delimiters. For that reason, QUrl::FullyDecoded and QUrl::DecodedMode do
not make sense, since they would cause the returned value to be
ambiguous and/or fail to parse again.
In fact, there was a comment in the test saying "look how it becomes
ambiguous".
Those modes are already forbidden in the setters and getters of the full
URL (setUrl(), url(), toString() and toEncoded()).
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer supports QUrl::FullyDecoded mode in authority() and userInfo(),
nor QUrl::DecodedMode in setAuthority() and setUserInfo().
Change-Id: I538f7981a9f5a09f07d3879d31ccf6f0c8bfd940
Reviewed-by: David Faure (KDE) <faure@kde.org>
The setting of EncodeDelimiters was temporary until we could remove the
old qt_urlRecode "decode all" mode (not the FullyDecoded mode, that
stays).
Change-Id: Ic07ebe4bb7fc72351b65bfb4619b71206cc8c0cd
Reviewed-by: David Faure (KDE) <faure@kde.org>
Just minor fixes and changes in wording, to support the new
understanding of the percent-encoded characters.
Change-Id: I77ec10e41f32292d705e4aa8197b9ddce5bef6d2
Reviewed-by: David Faure (KDE) <faure@kde.org>
This commit is similar to the previous commit that changed the behavior
of QUrl, but now to QUrlQuery.
We can now remove a section of qt_urlDecode, which is no longer used:
there's no "decode everything" mode anymore.
Task-number: QTBUG-31660
Change-Id: I66cfbfd290eeba5b04688cd5ffd615dd57cc6309
Reviewed-by: David Faure (KDE) <faure@kde.org>
The longer explanation can be found in the comment in qurl.cpp. The
short version is as follows:
Up to now, we considered that every character could be replaced with
its percent-encoding equivalent and vice-versa, so long as the parsing
of the URL did not change. For example, x:/path+path and
x:/path%2Bpath were the same. However, to do this and yet be compliant
with most URL uses in the real world, we had to add exceptions:
- "/" and "%2F" were not the same in the path, despite the delimiter
being behind (rationale was the complex definition of path)
- "+" and "%2B" were not the same in the query, so we ended up not
transforming any sub-delim in the query at all
Now, we change our understanding based on the following line from
RFC 3986 section 2.2:
URIs that differ in the replacement of a reserved character with
its corresponding percent-encoded octet are not equivalent.
From now on, QUrl will not replace any sub-delim or gen-delim
("reserved character"), except where such a character could not exist
in the first place. This simplifies the code and removes all
exceptions.
As a side-effect, this has also changed the behaviour of the "{" and
"}" characters, which we previously allowed to remain decoded.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer considers all delimiter characters equivalent to their
percent-encoded forms. Now, both classes always keep all delimiters
exactly as they were in the original URL text.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %7B and %7D to "{" and "}" in the output of toString()
Task-number: QTBUG-31660
Change-Id: Iba0b5b31b269635ac2d0adb2bb0dfb74c139e08c
Reviewed-by: David Faure (KDE) <faure@kde.org>
Argument to \qtvariable is the QT variable needed for linking to the
module.
Task-number: QTBUG-32172
Change-Id: I181c0cfaf9529f3aea741cdaee0f20d6cd0e2d2f
Reviewed-by: Martin Smith <martin.smith@digia.com>
Specifies the QT variable needed in the .pro file.
The argument of the command is the qmake QT variable.
To use, add "\qtvariable <value>" to a QDoc comment
which contains the \module command.
QDoc will then associate the class with the QT variable.
Only supported for C++ classes at the moment.
Part of work done for QTBUG-32172
Task-number: QTBUG-32172
Change-Id: Ia8eea30fcfc771191c23a5f5994a48732959ea49
Reviewed-by: Martin Smith <martin.smith@digia.com>
Added SH_Widget_Animate in QStyle styleHint, and use it to determine
whether widgets should be animated or not.
In this patch QTabBar, QColumnView,QTreeView and QWidgetAnimator are
patched to obey the new Hint.
Change-Id: Iefdbddc52c7843f6653dbfb5462125942489b4d9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
* changeFont is a delegate method of NSFontManager.
* exec() will not be called in Qt Quick.
Task-number: QTBUG-32450
Change-Id: I05e43ce84d28ff32c88d75bd6ee60653de6ca4f0
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
We don't support native widgets in Android, so we can get into a mess
when people set this widget attribute, since the FB compositor
will assume that all widgets have their own backing store. This adds
a capability flag to the QPlatformIntegration which allows the plugin
to disable the WA_NativeWindow feature.
Task-number: QTBUG-32685
Change-Id: Ic200487da4a297f71ab594cf7c90d1e1d53bacd3
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
In the case where the only obsolete members of a class
were actually non-members but just related functions,
the help file writer didn't include a reference to the
obsolete members file. This update fixes that bug.
Task-number: QTBUG-31379
Change-Id: I065da649bc12e3dcc81244939be0162599d54be9
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Instead the module decides now itself whether it supports iOS or not, because
soon it will enable itself :)
Change-Id: I4802441f0a01ed62966a7a0e66f5a8ccfe843cb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The reference color dialog helper change is
eeffcfbd89.
Change-Id: I35b505cce133adeed91df7c95b21f7c74c55cb53
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This patch fixes two issues that prevented the application font related tests
of tst_QFontDatabase from passing:
* The code for creating the font descriptor after the registration of an app font
with file name using CTFontDescriptorCreateWithAttributes must create a dictionary
with kCTFontURLAttribute as key and the CFURLRef pointing to the on-disk file as
value. Unfortunately the code mixed up keys and values in the dictionary.
* Registration of app fonts within QFontDatabase itself on Windows and Fontconfig
platforms works by QFontDatabase calling addApplicationFont on the platform db
after calling populateFontDatabase(). It assumes that addApplicationFont on the
platform db is capable of registering the font right away. This part was also
missing from the Mac implementation and this patch implements it by moving the
common registration code from a CTFontDescriptorRef out into a separate method,
called from populateFontDatabase() as well as addApplicationFont().
Task-number: QTBUG-23062
Change-Id: Ide5e6bf277d99f3cab50ee0d4631cc3fba6d0d45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The placement of the header, since, inherits,
instantiates, and instantiated-by are now in a table.
For C++ classes:
Header: #include <class name>
Since: <version>
Instantiated by: <QML type>
Inherits: <parent class>
Inherited by: <list of classes>
For QML types:
To import: import <QML module>
Since: <version>
Inherited by:<list of QML types>
Instantiates: <C++ class>
Inherits: <parent QML type>
Inherited by: <list of QML types>
This is only a part of the work being done for
QTBUG-32172.
Task-number: QTBUG-32172
Change-Id: Ia9d29e824ef7ab4052ea59c6397b5f8fd24022b9
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Icons are only set if they are valid.
Change-Id: If2398cdc977a3882e7738ef1bcf5519bd7053449
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Icons are only set if they are valid.
Change-Id: I7637dec18b3066930455a2f6fd40d87097eb20f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
- Add system tray tracker class to XCB plugin and
provide functionality via invokable slots
of the native interface.
- Remove XLib-dependency of widgets/utils.
- Reintroduce tracking of tray window destruction
and recreation, which was removed in the XLib-code
when porting it from Qt 4 to Qt 5.
This paves the way for implementing the tray icon
completely in terms of QPlatformSystemTrayIcon at some point
later.
Change-Id: Ia04268b0e2919c05874a3e9548930535332897c7
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
On some platforms (like BlackBerry) qDebug doesn't write to stderr,
so we directly write to stderr with fprintf.
Change-Id: Ib86211c98cf4da1fa2dbea4600a78e2013dc1a5a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Halley's method to get a better approximation is omitted, if it
would include a devision by zero (INFINITY/NaN is worse).
Change-Id: Ida09326e2b5892d7cb21bcb956631c289e5b56ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fill color was not correctly converted before being filled into
RGBA8888 images. This patch adds a function with convertion and
adds tests for it to tst_qpainter.
Change-Id: If8b0e6db38b2794a60301842e25f377eb7216796
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It makes sense for a QScopedPointer to be movable, for instance
for allowing instances to be returned from a function.
Ownwership of the managed pointer is still tied to one (and one only)
QScopedPointer instance.
Moreover, a move assignment operator makes sense as well, as it
implementing the equivalent of
this->reset(other.take());
only when other is a rvalue and not a lvalue (so either it's a temporary
or it's getting explicitly moved in with std::move).
This makes QScopedPointer API's a bit closer to std::unique_ptr's one.
Task-number: QTBUG-29754
Change-Id: If1ac0c688327a67af4ad5b7ad45b439b022ed1c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I.e. do not try to load file names that are not there anyhow. The
code would search for libcrypto.so.1.0.0 and libssl.so.1.0.0, while
on QNX the libs are called libcrypto.so and libssl.so, and there
are no symlinks with version numbers.
This saves ~ 45 ms in real apps (tested with Facebook, Twitter and
Foursquare), and ~ 24 ms at app startup in an isolated app without
GUI (difference maybe because threads are fighting for CPU or so).
Task-number: QTBUG-32548
Change-Id: I25869538bbfa3c2848541415e8361e0bd7a8fd50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add parsing for the window geometry specification to
QGuiApplicationPrivate. Enable the argument under a different
name for the other platforms as well.
Task-number: QTBUG-27349
Change-Id: I973b2c69f5172f7d0bc983b8ba4b0d164649ef02
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
When qdoc traverses its internal node tree to generate
either the html docs or the help file, it no longer
traverses nodes that were added to the tree as the result
of reading an index file.
Task-number: QTBUG-32622
Change-Id: Iac63ac2ce177b15b85a2aa73850c45891cbbc624
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
QDateTime can now be converted to strings compliant to RFC 2822.
Additionally, it supports RFC 850 and RFC 1036 during parsing.
By having them all together, all type of dates found in exchanged
messages on the internet (including USENET) get supported.
Change-Id: I771066c23f409d20b31b7d802f37852ea68ca2a0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Socket notifiers that are registered with BPS are disabled by a call to
select. This solves the echoTest2 test case of QProcess.
Change-Id: Ic7f3f14433477b89eaad5ffbeb6c22a1b5c2e910
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Support the byte-ordered RGBA format which is used by OpenGL, and many
endian neutral byte formats.
Task-number: QTBUG-32201
Change-Id: I77cffb4c30c69545fa96ded2f537b2ebd9351acb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
the built host tool may need to know what the target architecture is,
e.g. mkv8snapshot does.
Change-Id: Ie5b1f6a07fa082d212e7c5b54289de49fd74dbcf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-edited style convention for readability (as opposed to file size)
-removed extra CSS rule which does nothing
Change-Id: Ica9cbdf0c63bae87a8446afcbc22f74403e3247e
Reviewed-by: Martin Smith <martin.smith@digia.com>
The link to the class reference page for the class that
contains the obsolete members is now embedded in the text
description of what the page contains. This change affects
both the obsolete members papge and the compatibility members
page. Without this change, the link to the class reference
page stands off on its own and makes it look like the class
itself is obsolete or maintained for compatibility with
previous versions. Since this is not the case, the link is
now embedded in the text description of the page.
Task-number: QTBUG-31379
Change-Id: Ic5f4554c8722ee193f2dfae9efd8adab98f32ca1
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This macro is apparently knew. It was unknown to qdoc.
Now qdoc knows to ignore it.
Task-number: QTBUG-32344
Change-Id: Id4455ad2329aeb2d2f8cacef99cdd1ff2a72321c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Several instances where \page and \example are
corrected by removing the \page and leaving the
\example.
Task-number: QTBUG-331578
Change-Id: I95373c2d209698b68197bb9c95ef0c41e64c55d3
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This fix ensures that the page name is
set only once. Also included are a few
internal documentation changes that
bring qdoc's internal terminology up
to date.
Task-number: QTBUG-31578
Change-Id: Ib52a5a9024533d5a695cee0055bf2bc4d9bc2af9
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Needed to backport qtbase/46685f755b01288fd53c4483cb97a22c426a57f0
to Qt4.
We can't add new symbols in Qt4 to QFileIconProvider so we will make
the private class a friend of the QFileDialog.
Change-Id: I6bc5a2d127b09f20633e733a79de509c8c186c6c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
