To match QString and QByteArray behavior
Change-Id: Ifce4a5dee6fc9077e855a24499f11f911e359cf5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit b1ef104866.
This test is BPASS on openSUSE_42_3 for 5.12 and PASS on openSUSE_15_1
for 5.15.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: Ia1d81ed38491c27c01f270623c5082663f4da699
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The logic was complex and missed the UTF-8 UTF-8 case. It ended up
calling the UTF-8 to Latin1, resulting in an improperly-sorted
container, which in turn meant keys were not found when searched.
Fixes: QTBUG-86873
Pick-to: 5.15
Change-Id: I0d3ff441bec041728945fffd16379dec418637ca
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were missing 64-bit signed mul_overflow on 32-bit platforms and in
those where we did have it, the detection was awful (both for signed and
for unsigned). So if one of the parameters is a constant, we can
simplify the code generated.
Change-Id: Ia99afccf0c474e20b3ddfffd162a60d269eb1892
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The unit tests of QPrinter assume that a printer which is default-
initialized is the same printer as the default printer. However, when
no printer is set to default, this is not the case. When no printer
is the default printer, a default-initialized QPrinter will be the
first printer found.
This patch adapts the unit tests to work also when no printer is the
default printer, even though printers are available.
Change-Id: I4967e5b1c4fb8a7c33c911184289ec5cd283fc58
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change lots of code to avoid the deprecated operator+() or implicit
casts to int.
Change-Id: I0c343cd5b28603afdf1214eefb85e928313345e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QtConcurrent algorithms are making an internal copy of the passed
sequence, to make sure it won't be destroyed before the execution
is finished. However, they were using iterators of the originally
passed sequence. So, if the original sequence is deleted, QtConcurrent
algorithms would use invalid iterators to a deleted sequence. This
might work with Qt containers thanks to implicit-sharing, but with
other containers will lead to unexpected results. Fixed them to work
on the internal copy of the original sequence.
Change-Id: I1d68692ed9746223c85f51bb05977bc1443b681d
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Before we had the option of eager evaluation, we were able to use the
dirty flag to detect whether we are recursing. However, eager properties
will lead to a evaluateIfDirtyAndReturnTrueIfValueChanged call, and that
in turn will clear the dirty flag.
Introduce a new member to detect that situation, and set the bindings
error state to BindingLoop if we detect that kind of loop.
Change-Id: If40b93221848bd9e9422502318d992fad95b0b74
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not always use the smoothScaled routine, the normal routines are
also optimized, and do not convert to alpha formats when not necessary.
Task-number: QTBUG-49719
Change-Id: I6ee9b620cc259472c419e7363357f41ce29b594a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Configuring and building Qt should not require a running dbus session bus.
However, when building the html_docs target on a headless system, qmake bails
out with error if dbus is linked in, while only showing a warning if it's not.
This is unnecessary. We can warn in both cases, build the tests with dbus
linked in. Running the tests will fail if there is no session bus, ie.
tst_QDBusConnection_Delayed::delayedMessages fails with
QVERIFY(session.isConnected);
Pick-to: 5.15
Change-Id: Ia6b6e226398e87880449b003d28dfd76553bee2c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
It was already used many places directly making the code inconsistent.
Change-Id: I3b14bc6c333640fb3ba33c71eba97e78c973e44b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If it does not add item,the currentText should return empty string
Fixes: QTBUG-86580
Pick-to: 5.15
Change-Id: I54c3a8b7ececfb1e62bcd7ac592feccaff3f8b48
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Current implementation of QLineEdit uses the "edited" bit-field flag to
prevent unnecessary emissions of editingFinished() when a line edit
loses focus but its contents have not changed since the last time the
signal was emitted; however, this flag is only cleared when the signal
is fired due to focus loss and not when the Return/Enter key is pressed.
This causes an unexpected double emission of the signal when focus is
lost following a press of the Return/Enter key if the line edit's text
was not further altered between the two actions.
This change includes the Return/Enter press as a trigger for clearing
the "edited" flag to make editingFinished()'s behavior more consistent
and expected. Prevents slots in user code from triggering twice in
situations where the line edit's current contents have already been
handled, but still allows the end-user to force an emission of the
signal via Return/Enter.
The effect of the "edited" flag on the signals behavior has also been
noted in the signal description as it was previously omitted.
[ChangeLog][QtWidgets][QLineEdit][Behavior Change] Pressing the
Return/Enter key in a QLineEdit will now also prevent editingFinished()
from firing due to focus loss if the contents of the line edit have not
changed since the last time the signal was emitted.
See - https://forum.qt.io/topic/116902/
Change-Id: I11aadd45341337b7852da8cf5802c7c9efdd614d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change the implementation of Qt DBus to use QMetaType directly
instead of integer based type ids.
Change-Id: I999023b58fa50dcc3504386467faf09874f7d2cf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modernize the code base, use QMetaType and avoid
reinterpret_casts.
Change-Id: I0bad2ee393a0f850cf40b248cb9439b06ed9f663
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It already has a move-assignment operator, and implements swapping.
This requires a specialization of the QExplicitlySharedDataPointer
destructor to be forward declared, and an implementation that is
identical to the default version. Otherwise we would need
QPlatformPixmap to be fully defined in the public QPixmap header.
Change-Id: I2651bbc29a7083a93e3b3ad671d3aeea659b7d5a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In the past, string formatting and parsing was done in the users
locale. Now, the C locale is consistently used in QDate(Time) and
localized functions are offered in QLocale. This patch reflects
this change in the documentation.
Change-Id: I81afda9063fa232d06841d63f69e19b49f8083f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Colors with wrong number of elements are now invalid.
Change-Id: I32c934894de86095d9790baa5f0d2001d76bcd3c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QDateTime's comparisons just compare milliseconds when both values are
local times and their statuses (hence DST-ness) match. It can do the
same for time-zones. While doing the same for UTC and fixed offsets
wins nothing, it also costs nothing, given that we're already checking
the spec.
Task-number: QTBUG-75585
Change-Id: Ib6d824569aba8def2f1319ef3a11cca6869a5b5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add some unit tests using emojis as separator characters to check
utf handling.
Change-Id: I03c4bb5cd349e649c58e8a908c38a0185d80e722
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Binary provider:
It was not possible to remove the first glob in a local override,
because the mainPattern handling would re-add the first glob back.
XML provider:
It didn't support glob-deleteall.
Also, the order of the providers was wrong. We want to pick local
overrides first, the internal DB has to go last in the list.
Fixes: QTBUG-85436
Pick-to: 5.15
Change-Id: I9a4523f37cd962c730df9a6ed992bd01c075bf03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To avoid potential decompression bombs. This is implemented with just
a simple check that the ratio doesn't pass some hardcoded preset.
Change-Id: I17246f0f43e73280cdb35a8f03d65885f5678ad6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
tst_qguiapplication was missing an Info.plist file.
We can't directly reference the tst_qcoreapplication Info.plist
file like the qmake project does, because that breaks ninja
(says multiple rules create the same output file), so use a
copy instead.
Blacklist the qpluginloader loadMachO test when doing CMake builds.
The qmake projects use multiple custom rules to build the macho
plugins, which need to be ported to CMake.
Task-number: QTBUG-86053
Task-number: QTBUG-86792
Change-Id: Iaff2b2d5e9e84a457b4f2ffc011a580388498f00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
MSVC has strange problems with it and we don't actually need it.
Change-Id: I2c443946d52d475208800f310b5f910da165c99b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Current implementation of QProgressDialog always calls
QCoreApplication::processEvents() when the user calls
QProgressDialog::setValue() if the PD is modal. For most cases this is
fine, but when using a Qt::WindowModal PD with setValue() connected to
a signal in another thread using Qt::QueuedConnection a reentrancy
issue is present if setValue() is triggered too frequently as the
execution of its previous call may not have finished. If this happens
too many times in a row a stack overflow will occur.
Current documentation notes this potential issue but offers no way it
avoid it while still using QProgressDialog (user must implement a
custom dialog) without resorting to using Qt::BlockingQueuedConnection,
which unnecessarily reduces performance.
Introduces the boolean reentrancy guard "processingEvents" that is
checked before calling QCoreApplication::processEvents() in a modal
PD when setValue() is used. It is set before the first call to
processEvents() and cleared after that call returns. This ensures that
only one invocation of processEvents() is possible from within
setValue() at a time, and thereby minimizes iterations of the main event
loop and eliminates the aforementioned stack overflow condition.
See - https://forum.qt.io/topic/118292/
Fixes: QTBUG-10561
Pick-to: 5.15
Change-Id: Ifa9b91cbb66881981356954ead0906bdc91fab60
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
In order to modify a container through an iterable, we need the original
container to be mutable. The iterable, then, is not a conversion of the
container, but rather a view on the container. The concept may be
extended to other types.
In order to facilitate this, provide a set of methods in QMetaType and
QVariant similar to the convert family. The new methods are non-const
and expect the original value to stay available during the life time of
the view.
Change-Id: I363621033f7fc600edcea2acb786820ccba49c86
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And add mutable iterators. This requires some refactoring of the
existing iterators.
Task-number: QTBUG-81716
Change-Id: I61b3a3e8c0df5fd449679257a29d9f0c3d19c4f0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The constructor taking an array literal will now stop at the first
null-terminator encountered.
And fromArray is introduced which only supports array literals.
Constructs a view of the full size. Explicit so it shouldn't be
surprising.
Change-Id: I1497c33a5c12453a95e87c990abe6335b2817081
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
1. Make the ctor unable to construct a QByteArrayView from
array literals other than 'char'.
With the new behavior it would either be (very likely) unintended to
pass e.g. a std::byte array to the ctor. And it would be confusing
because you would get different sizes based on signed-ness.
2. Introduce fromArray
Only supports array literals. Constructs a view of the full size.
Explicit so it shouldn't be surprising.
Change-Id: Ifdb55eb21057dfe7053b2561bd81e2c9825e9bc6
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The reason for this bug is that after the TextItem loses focus,
the focusItem in QGraphicsScene is already empty.
When QGraphicsScene responds to the inputMethodEvent event again,
since focusItem is already empty,focusItem will no longer deliver events.
Fixes:QTBUG-85088
Pick-to:5.15
Change-Id: I329054333c2adec133d35318761612aca3afcf0d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
