Use QVERIFY in test functions, and (void)tr.load outside.
Change-Id: I18d2eb3aeaf00f9f2bbe75d0a2d8b12569b541e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
These states correspond well with ScrollPhase, and this abstraction
makes it possible to handle wheel events the same way as mouse events
in Qt Quick: on "begin" we deliver to all Items and Handlers until
all points (the only point) are accepted; on "update" and "end" we
deliver only to the exclusive grabber, if there is one, and to any
passive grabbers.
Change-Id: I702dbd4f2c1bf5962eb3dbb9e4b725300a00a887
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QToolButton::initStyleOption is const. Apply some DRY while at it.
Change-Id: If29a52e828bbc2aa58df2852c4c434545acfef3e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Adjust to changes to QIcon::pixmap, QMetaType::type, and
QAbstractItemView::itemDelegate.
Change-Id: I9eb0331ef899131afc86c33f27feeee76331ffc8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change the rounding of negative half values to match standard C++
round, this will also allow future optimizations.
Change-Id: I8f8c71bed1f05891e82ea787c6bc284297de9c5c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QCoreApplication object is instantiated, creation of the internal
message window is delayed until QEventDispatcherWin32::processEvents()
is called or socket/event notifier is registered. But, if the user uses
a native event loop, posted events are not delivered and timers do not
work.
This problem was fixed in a4ac4b3263 for
QWindowsGuiEventDispatcher in the same way. So, the risk of regression
is minimal.
Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In 4e400369c0 we began to send synth-mouse
events from the touch device, but in the opposite direction it was not
consistent.
Add autotests to prove that it's consistent both ways now.
Change-Id: I7df2328fef224dc1529ca5d27411cd8a5a9c8df9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This functionality was only in Qt Quick in Qt 5. Now we move it up to QtGui
so that every QEventPoint will have a valid velocity() before being delivered
anywhere.
[ChangeLog][QtGui][QPointerEvent] Every QEventPoint should now carry a valid
velocity(): if the operating system doesn't provide it, Qt will calculate it,
using a simple Kalman filter to provide a weighted average over time.
Fixes: QTBUG-33891
Change-Id: I40352f717f0ad6edd87cf71ef55e955a591eeea1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QQuickEventPoint instances were very long-lived and got reused from one
event to the next. That was initially done because they were "heavy"
QObjects; but it also became useful to store state in them between
events. But this is in conflict with the ubiquitous event replay
code that assumes it's OK to hold an event instance (especially
a QMouseEvent) for any length of time, and then send it to some widget,
item or window. Clearly QEventPoints must be stored in the QPointerEvent,
if we are to avoid the need for workarounds to keep such old code working.
And now they have d-pointers, so copying is cheap. But replay code
will need to detach() their QEventPoints now.
QEventPoint is useful as an object to hold state, but we now store
the truly persistent state separately in an EventPointData struct,
in QPointingDevicePrivate::activePoints. Incoming events merely
update the persistent points, then we deliver those instead.
Thus when event handler code modifies state, it will be remembered
even when the delivery is done and the QPA event is destroyed.
This gets us a step closer to supporting multiple simultaneous mice.
Within pointer events, the points are moved up to QPointerEvent itself:
QList<QEventPoint> m_points;
This means pointCount(), point(int i) and points() can be non-virtual.
However in any QSinglePointEvent, the list only contains one point.
We hope that pessimization is worthwhile for the sake of removing
virtual functions, simplifying code in event classes themselves, and
enabling the use of the range-for loop over points() with any kind of
QPointerEvent, not just QTouchEvent. points() is a nicer API for the
sake of range-for looping; but point() is more suited to being
non-const.
In QML it's expected to be OK to emit a signal with a QPointerEvent
by value: that will involve copying the event. But QEventPoint
instances are explicitly shared, so calling setAccepted() modifies
the instance in activePoints (EventPointData.eventPoint.d->accept);
and the grabbers are stored separately and thus preserved between events.
In code such as MouseArea { onPressed: mouse.accepted = false }
we can either continue to emit the QQuickMouseEvent wrapper
or perhaps QEvent::setAccepted() could become virtual and set
the eventpoint's accepted flag instead, so that it will survive
after the event copy that QML sees is discarded.
The grabChanged() signal is useful to keep QQuickWindow informed
when items or handlers change exclusive or passive grabbers.
When a release happens at a different location than the last move event,
Qt synthesizes an additional move. But it would be "boring" if
QEventPoint::lastXPosition() accessors in any released eventpoint always
returned the same as the current QEventPoint::xPosition()s just because
of that; and it would mean that the velocity() must always be zero on
release, which would make it hard to use the final velocity to drive an
animation. So now we expect the lastPositions to be different than
current positions in a released eventpoint.
De-inline some functions whose implementations might be subject to
change later on. Improve documentation.
Since we have an accessor for pressTimestamp(), we might as well add one for
timestamp() too. That way users get enough information to calculate
instantaneous velocity, since the plan is for velocity() to be somewhat
smoothed.
Change-Id: I2733d847139a1b1bea33c00275459dcd2a145ffc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test was previously using int; I shall be wanting to add tests
that exercise the bounds of qint64. Clean up the layout of the
test-row additions in the process of making a trivial change to them
all. Also const the QFETCH() types so we catch any use of non-const
methods on the values fetched.
Change-Id: I4b0187de71f5f14b39b4eabe8afd12a196f73d23
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using imprecise QTest::qSleep() to estimate the
elapsed time, we trigger a single shot PreciseTimer and
gather all the data in lambda. We wait for lambda to be
executed - we give it twice as much time as is in theory
needed. Afterwards we verify all the data collected in lambda.
Task-number: QTBUG-82903
Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some CMake files currently assume that QtGui is always enabled and we
get a configure-time failure without these changes.
Task-number: QTBUG-86053
Change-Id: I28e32c180c32221f32519017bac6b518a19d5983
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The qfilesystemmodel.pro was recently moved to the gui tests subfolder,
but it uses widgets inside. Skip it in a no-widgets build.
Amends fb9ec8ad44
Task-number: QTBUG-86187
Change-Id: I955556ffddad483d4c25602ae126b8c2433091b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires refactoring of QMetaSequence, as they share a lot of
common functionality. QMetaAssociation provides a low level interface to
an associative container.
Task-number: QTBUG-81716
Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends f9940b15f7, which
amended 6e1d70ae12.
The bevel of the button is not defined by the contentsRect, but by the
borderRect that the stylesheet style calculates.
Change-Id: I9a0d5bf29a06ce2270014f0d144e33cc3a1a7473
Pick-to: 5.15
Fixes: QTBUG-86587
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
test.bjon file doesn't exist, however, it's still included in json.qrc.
That causes the test to fail on Android because it's using that resource
file.
Change-Id: I1e93076069073a1a621459a7d90aec5c0c03f768
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The macro BACKTRACE_HELPER_NAME is defined inside a block with
#ifdef __GLIBC__ which is not defined on Android, thus causing the test
to fail on Android.
Change-Id: I55e9b3e3bae2da182481239ad88107c36e3bd438
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This was overlooked when doing the conversion to use UTF-8 as the
standard 8 bit encoding for text.
Fixes: QTBUG-54942
Change-Id: Ib7b1b75b4d694648ab7143f6930b6bb1dcad19c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
The seconds and milliseconds default to 0; so omit them when they're
zero, unless there's nearby code that contrasts nicely with them.
Change-Id: Iea049015e976f5a5209fe87a2cbfdae9de49a559
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Certain servers, like smtp.live.com, will send a request for a
certificate even though they don't require one. In Schannel this
manifests as a warning/info status (SEC_I_INCOMPLETE_CREDENTIALS).
In the cases where it's not needed we should suppress the warning and
try to connect anyway, which is done by calling
InitializeSecurityContext again when we get the status.
Pick-to: 5.15
Change-Id: I3c48140f2949d8557251a49a2b66946da9395736
Reviewed-by: Joshua GPBeta <studiocghibli@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTime() is invalid. Only the seconds and milliseconds are optional,
for valid times. Use startOfDay() for zoned times, QTime(0, 0) for
fixed-offset ones.
Change-Id: I3b65d5c3733ac83dc3a6c214859c3f56a480bb94
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Nothing used defDateTime(), nothing but it used defTime(). The only
other use of defDate() were from one test, which might as well make it
a local variable.
QDateTime's default is invalid, making invalidDateTime() redundant,
and the invalidDate() and invalidTime() it called had no other users.
Change-Id: I0e07ee58478bfe8ba680eafb52e2f73a962edd33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since an EXECUTE BLOCK statement can have a mix of ? and :var syntax
then a special case for this needs to be added so that it does not try
to convert the :var parts into positional placeholders as they need to
kept as-is when preparing such a statement.
Pick-to: 5.15
Fixes: QTBUG-83152
Change-Id: Iff891207ad6dea1681a1b3a335acbbbb668b465d
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were starting to run out of space for builtin core types.
Remap the type id's to create lots of additional space.
We now reserve the first 64k id's for Qt, and have 16k id's for
Qt Core. That should hopfully be enough for a while ;-)
Fixes: QTBUG-85914
Change-Id: I0dab6bf23652e46a9557d9b38af7990b68c572b6
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
They were disabled in ad0e3e26fa,
but that was probably accidental.
Change-Id: Ia9cbccfbeecfe84768c3465f5699ed44b7f932a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide functionality to add and remove values, so that you can use a
sequential iterable as stack or queue if the underlying container
supports this. To this end, provide a way to specify whether the
value should be added or removed at the beginning or the end of the
iterable.
Change-Id: If63d302f3ca085e56d601116ce4dfaa6b94a0c4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For completeness' sake we should expose this. The iterators provided by
QIterable and friends will check the category at runtime, and should give
sensible feedback.
Change-Id: I778894f340c862f79a18c6c5607bcbba98dd7598
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
CentOS it seems not only backported some OpenSSL 3 functions,
but also raised the default security level to 2, making some of
our keys (and MDs?) 'too weak' and failing auto-tests here and
there as a result. For our auto-test we lower the level to 1,
as it is expected to be.
Fixes: QTBUG-86336
Pick-to: 5.15
Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There is no reason to use double precision for colors. We at most have
16 significant bits anyway.
Change-Id: I8b402cd978675b8ba7248176976d934363212ff1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Test data for QDateTime unit tests was constructed in system's local
time, which made unit test outcome dependent on the time zone of the
system running the tests.
This led to failing unit tests on systems with libc6 version
2.31 or newer. A QDateTime in a timezone, which has daylight saving
time, was created and then used in Hawaii's time zone,which has no
daylight saving time. Newer glibc checks this and returns errors.
This patch changes the behavior to create the test data in a
specified time zone setting.
Task-number: QTBUG-80441
Change-Id: I0330b647fa011be99141dde09001ff2d58bd3a5f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit f51b690e91.
The commit made all animation tests in qtdeclarative on macOS
flaky.
Change-Id: I4ccaa879df7e2ba7e253657de01cbabc9b2c655f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
AFAICT with GSSAPI the normal workflow is to run kinit or similar and
authenticate before running programs relying on it. Therefore
we can try to get the credentials before we choose whether or not
to use Negotiate.
Pick-to: 5.15
Task-number: QTBUG-85123
Change-Id: If0478fdd45389b2939ad87c2f582776fe56959bb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is so that they are in line with the "value_type" usually found in
containers. Associative containers have "key_type" and "mapped_type" and
we will use those names for access to elements in QMetaAssociation.
Using "value" as name for sequential containers improves consistency.
Change-Id: I628b7e1446bb2d56843b843bca72d279a6b247e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Our authentication code is race-y by design:
1. When two requests are fired off and queued at the same time in the
same QHttpNetworkConnection then if one of them encounters
"authentication required" then it will copy whatever credentials it got
to all the other channels in the connection. This is likely what the
first part of the test is testing.
2. If a later request is fired off and it includes credentials in the
url then the newly included credentials should be used instead of the
cached ones.
The race here can occurr when one socket either takes too long to
connect or the connected signal is not received early enough. Then the
first socket is used for both requests and then we can hit case #2 when
the url contains credentials.
Pick-to: 5.15
Change-Id: I646a5378d8c1256b2de98b51912953df29f68cb2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is added to Interbase in v7 and Firebird in v3 which has been
available for sometime now. This means the minimum supported for
Interbase is now v7.
[ChangeLog][QtSQL][Interbase] The minimum required version for Interbase
is now v7.
Fixes: QTBUG-83401
Change-Id: I9927fd962f25c935be8ed5d2b7c76c00fb88cd8c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This change shouldn't matter much to widgets, since style names
there are case insensitive. But for controls style names are
case sensitive, and in that case, "macOS" looks more correct.
Change-Id: Ia1d442bce465692ff58fecba1cc68ecbb2e52549
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Instead of doing string formating first and then using QTest::newRow,
we can do both at the same time using QTest::addRow
Change-Id: Ia5c90eb705a806e37b96a1fa174a6557f91bee6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
To not have to bother with encodings, a few QStrings are changed
to QByteArrays. This way, a few calls to QString::fromLatin1 and
to QString::toLocal8Bit can be removed
Change-Id: Ia0cf27fc2a86f9842ed0f3ebe47b050bb8a3f4e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looks this is redundant in fact and unneeded. The check can never be
evaluated to true, since if so, it would mean it had failed in the
previous iteration, in which we already handled the exit from the loop.
Fixed also some comments.
Task-number: QTBUG-83419
Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The removal of the QProcess::start(QString, OpenMode) leads to more
porting work than anticipated. A call like
QProcess p;
p.start(cmdline);
must be transformed in the following cumbersome way:
QProcess p;
QStringList args = QProcess::splitCommand(cmdline);
QString program = args.takeFirst();
p.start(program, args);
This patch revives QProcess::start(QString, OpenMode) and renames it to
QProcess::startCommand. This is still source-incompatible, but the
transformation is much simpler:
QProcess p;
p.startCommand(cmdline);
[ChangeLog][QtCore][QProcess] Added QProcess::startCommand(QString,
OpenMode) as replacement for the removed QProcess::start(QString,
OpenMode).
Change-Id: I5499bbb39a025e115042c43a4cc63affddae585c
Reviewed-by: hjk <hjk@qt.io>
It's not guaranteed that all curves we want to use are supported
by a specific build of OpenSSL library we have to link with. Filter
out files that contain EC, which is not among the curves, reported
by QSslConfiguration::supportedEllipticCurves.
Fixes: QTBUG-46203
Pick-to: 5.15
Change-Id: I70d7e6fcacb3d81f8c771e4a8d6cca06295e7474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Changed QString to use implicit element reserved by QArrayData
Task-number: QTBUG-84320
Change-Id: If517500b3f0e71bb8d2989c64815a634aa8dd554
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Merging QAbstractPrintDialog with QPrintDialog, as proposed in the
removed comment, seems to have little value, given that the platform
specific implementations rely on the current abstraction.
Adjust examples and tests; with the QAbstractPrintDialog test now
testing the QPrintDialog::options API, the corresponding test function
can be removed from the QPrinter test.
Change-Id: Ia8906627898332e8590ea9b27e3d71dfcc6e8d71
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QDate was changed to consistently use the C local in
serialization and parsing in git commit
5ba66c5622.
This commit reflects this change in the unit tests.
Task-number: QTBUG-80441
Change-Id: Ib21a215ef0e36c9eaa2c161b92c6877a50ae6f06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Updated moveNonPod function to behave correctly under
exceptions being thrown. This is the version that was implemented
at some point but then got changed prior to merge. Added tests for
moveInGrowthDirection (which uses moveNonPod in general case) to
verify that range movements are correctly done
Updated QCommonArrayOps access modifier from private to protected
to allow testing of internal stuff by subclassing
Task-number: QTBUG-84320
Change-Id: Idb994a72ee601762e32248670cdc7819aaca0088
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Scoped GrowsBackwards-optimized erase to only be applied
when erase starts at the beginning of the element range.
In other cases, old "left-shifting" erase is used to align
with std::vector::erase invalidation policy
Task-number: QTBUG-84320
Change-Id: I2e7f3b96b056bc371119eb2d36cc7c74af52c394
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Gives it its own changed signal, and simplifies setting from group,
while fixing an inconsistency in propagation.
Change-Id: I22b243210260a8878144fa4b60204df46f847f37
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I still have doubts that QEventPoint can't be made small enough that
copying would be cheaper than reference-counting and all the indirections
in now-noninline accessors, but this gives us the usual freedom to
change the data members later on.
Change-Id: I792f7fc85ac3a9538589da9d7618b647edf0e70c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before, we used not so accurate QTest::qWait(50)
to measure the accuracy of more precise timer's interval.
In addition, the checked range for remainingTime (50, 200)
was probably wrong, since by definition it couldn't be more than 150,
as we started the timer with interval of 200 and waited at least 50.
In this fix we have additional "tester" timer to measure remainingTime
of "tested" timer. The "tester" is a singleShot timer with interval of
50, and is started together with "tested" timer. Whenever the "tested"
timer timeouts, it restarts the "tester" timer - this is done desired
number of times (2 by default, like in the original test).
The test itself lies now inside tester's lambda. We fix the tested
range (at least 1, no more than 150). The minimum value could in
theory be greater, but it's enough to test that it's not overdue.
Finally, we wait for expected number of test runs. We give it twice
as much time as is in theory needed.
Task-number: QTBUG-83419
Task-number: QTBUG-58519
Change-Id: I43836d787d804f22bb66515ebb215d040189c4f3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
It flaky fails for both normal and reverse cases.
Pick-to: 5.15
Task-number: QTBUG-41341
Change-Id: If6ecd6dc58f131bb67d46a5d508f59b6bb0fd962
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
[ChangeLog][Source-Incompatible Changes] QProcess::setupChildProcess()
was removed. To execute code in a child process, use
QProcess::setChildProcessModifier()
[ChangeLog][QtCore][QProcess] Added setChildProcessModifier() function
with which one can provide code to be run in the Unix child process
between fork() and execve(). With this function, it is no longer
necessary to derive from QProcess in order to execute actions in the
child process.
Another reason is that we can tell whether the std::function carries a
valid target much more easily than we can tell whether QProcess was
overridden.
The setupChildProcess() virtual function does not need to be marked
final, since no overrider could ever return an inaccessible private
class. This also makes sure the error presented to the user is about the
return type, not about attempting to override a final.
Clang:
error: virtual function 'f' has a different return type ('void') than the function it overrides (which has return type 'QProcess::Use_setChildProcessModifier_Instead')
GCC:
error: conflicting return type specified for 'virtual void MyProcess::setupChildProcess()'
note: overridden function is 'virtual QProcess::Use_setChildProcessModifier_Instead QProcess::setupChildProcess()'
ICC:
error: return type is neither identical to nor covariant with return type "QProcess::Use_setChildProcessModifier_Instead" of overridden virtual function "QProcess::setupChildProcess"
MSVC is not relevant since it doesn't compile to Unix.
Change-Id: Ia8b65350cd5d49debca9fffd15f801161363aea7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QDateTime::toString uses the C locale since 5ba66c5622
So don't expect locale specific day- and month-names.
Task-number: QTBUG-80441
Change-Id: I08f53b6b33ed9e7eaaa58df4ca6a966c4ba9ef24
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The fix ensures that it can find the column for the array correctly
when reading/writing and also handles the integer typed arrays correctly
too.
Pick-to: 5.15
Fixes: QTBUG-83409
Change-Id: I92d982bdf0927e6ebc6dce84fec9ad6c44c26c25
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make QTBF ready for Qt6 by using qsizetype in the API and use
QStringView where it makes sense.
Change the exported API of qunicodetools to use QStringView as
well and use char16_t internally.
Change-Id: I853537bcabf40546a8e60fdf2ee7d751bc371761
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QStyleOptionGraphicsItem::matrix and levelOfDetail are deprecated and
not used anywhere anymore.
Change-Id: Id4b0fa8ac3ac53d771e858ecda5524a5e690342d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Calibrated to match F16C and ARM-FP16 hardware conversions.
Change-Id: I3bdd4d3db3046fee4aeb24e4ce8b9bc9a06e0397
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just starting 20 threads to test this won't cut it if
the machine you're testing on has an ideal thread count
of 16 or larger.
Change-Id: Icba8f00aa836fec6da41c71b318e9e17bdd47c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is a source incompatible change for widget implementors.
Leaving the old enterEvent as a virtual overload is problematic due to
shadowing. Best to make a clean cut, widget reimplementors will get a compile
time warning if they mark their override as such, or if they try to call the
parent class implementation.
Addresses ### Qt 6 comment.
[ChangeLog][QtWidgets][QWidget] The virtual enterEvent handler now receives
a QEnterEvent, which contains information about mouse position and button
states, rather than a plain QEvent.
Change-Id: I233f594fd79c0c090983b3db8532913d00132fde
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Adjusting the QPrinter test case - some use cases no longer exist, or are
already tested in QPageSize and QPageLayout tests.
Adjust examples and manual tests.
Change-Id: I01cbc65f3d8031aea2dac86dd942126ba708b111
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Since waiting for a spy employs polling, it may happen
that while waiting for a startedSpy we had received already
a signal for finishedSpy. This explains current flakiness.
The fix is to connect to lambdas instead and update
the hit count accordingly. Inside lambdas we also
ensure the correct order for started / finised signals.
After waitForFinished() unblocks we ensure that possible
pending asynchronous signals (started / finished) are processed
and check the final state.
Task-number: QTBUG-83076
Change-Id: I16963ef9c011cb613d7b409d3e3032303a942336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Addresses ### Qt 6 comment, and documentation pointing out that the parameter
value is ignored. It wasn't ignored in the code, but that's the kind of change
we can make now.
With this change, QUnifiedTimer::updateAnimationTimers is only called with -1
as the currentTick input parameter, also from Qt Declarative. Make it default,
so that leaf modules can be fixed. Once that it done, the parameter can be
removed completely.
Change-Id: I80c57ff92f3b615b932dd73d711cf6397347efd8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
In 3558704ed5, we added code to
support old .ui files which used the old integer scale for font
weights by checking for a special attribute which would help
separate new and old files.
Since then, it has become apparent that the weight element in
.ui is not actually used for anything, since it is only emitted
when the bold flag is set and always has to match QFont::Bold
in these cases.
So instead of converting, we simply ignore it now, and respect
the bold flag instead.
This also reverts the changes to ui4.* in uic, since the
scale attribute is no longer needed.
Task-number: QTBUG-42248
Change-Id: I1898868b58004099590f4eaf01f24c57bd34d779
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qmake parser of pro2cmake handles completely commented lines to make
assignments like this work:
SUBDIRS = \
foo \
# bar \
bar
However, assignments like
SUBDIRS = \
foo \
#bar \
bar
were cut off at the commented line.
Fix this by allowing leading whitespace for "fully commented lines".
Change-Id: Ib5de850a02fd9b9ebb7c056c2f64f9d684334b08
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Traditionally when calling reserve it's because you expect to append
up to X amount of bytes. We should keep that behavior the same.
With another patch still in the works current behavior caused an issue
with QStringBuilder in QNAM, as mirrored in the testcase attached.
Change-Id: I9792a8f158fc9235e3de48ac8b06ac2c10e7f3dc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Views / delegates absolutely *adore* hammering data(). A simple
QListView showing a couple of dozens entries can call data()
a hundred of times on the first show.
Back of the hand calculation,
* 2 times per visible item (sizeHint() + paint()),
* times 9 roles used by the default delegate,
* times 20 visible items
= 360 as a bare minimum, assuming the view doesn't redraw twice
accidentally. Move the mouse over the view, and that'll cause
a full update with certain styles: 360 calls to data() per update.
This has an overhead visible in profilers. The model's data()
has to re-fetch the index from its data structure and extract
the requested field every time.
Also, QVariant is used for the data interexchange,
meaning anything that won't fit in one is also a memory allocation.
This problem will likely be gone in Qt6Variant as that
will store sizeof(void*) * 3, meaning QImage/QPixmap and similar
polymorphic classes will fit in a QVariant now...
So I'm trying to to remove part of that overhead by allowing
views to request all the data they need in one go. For now,
one index a a time.
A view might also store the data returned. The idea is that
the same role on different indexes will _very likely_
return variants of the same type. So a model could move-assign
the data into the variant, avoiding the memory allocation
/deallocation for the variant's private.
This patch:
1) Introduces QModelRoleData as a holder for role+data.
2) Introduces QModelRoleDataSpan as a span over QModelRoleData.
The idea of a span type is twofold. First and foremost, we are
in no position to choose which kind of container a view should
use to store the QModelRoleData objects for a multiData() call;
a span abstracts any contiguous sequence, leaving the view free
to do whatever it wants (statically allocate, use a vector, etc.).
It also solves the problem of efficient passing the roles and
gathering the returned variants from multiData().
3) Add multiData(), which populates a span of roles for a given
model index. The main advantage here is that a model can fetch
all the needed information for a given index just once, then
iterate on the span and provide data for each requested role.
Cf. this with data(), where every call has to re-fetch
the information for the index.
A couple of models have been ported to multiData(), as well as
QStyledItemDelegate.
[ChangeLog][QtCore][QModelRoleData] New class.
[ChangeLog][QtCore][QModelRoleDataSpan] New class.
[ChangeLog][QtCore][QAbstractItemModel] Added the multiData()
function.
Change-Id: Icce0d108ad4e156c9fb05c83ce6df5f58f99f118
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When the view was already sorted by the column and order given to
sortByColumn(), a resort was not triggered which is a regression since
d0f909f8db.
Therefore don't rely on sortIndicatorChanged() in this case and trigger
an explicit sort as it's done when no user-triggered sorting is enabled
Fixes: QTBUG-86268
Change-Id: I3ec30ab81f304d5a19cef6d67b8a81c21b4a112d
Pick-to: 5.15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
So far QPropertyAlias was limited to working with QProperty<T>.
Change the implementation, so it can be constructed from any
property or even a QBindable<T>.
Change-Id: I175cffe94a9ef332367d39faa976eb065b0e6ffe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a new BINDABLE declaration to the Q_PROPERTY() macro that tells moc
where to find the QBindable for the property.
Add a QUntypedBindable base class to QBindable<T> that gives access to
generic functionality and checks argument compatibility at runtime.
QBindable<T> will still do static checking at compile time.
Add QMetaProperty::isBindable() and QMetaProperty::bindable()
to be able to dynamically access the binding functionality.
Change-Id: Ic7b08ae2cde83fd43e627d813a886e1de01fa3dc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a compatibility property class that makes porting to the new
property system as simple as possible.
Binding evaluation for those compat properties is eager, as we
do not control possible side effects of the code in the existing
setters.
Change-Id: Ic56347abb49e40631ec73e88c6d40d4bdb05ca29
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a QObjectComputedProperty. This class doesn't store the data
itself, instead relies on a getter method to compute it's value.
As the property is read-only, one can not bind to it, but it can
be used in other property bindings.
Change-Id: I0f6bffdd9f80f1d0829826f93a47257f2b3127af
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add Q_OBJECT_BINDABLE_PROPERTY() macro that can be used to define
a bindable property inside QObject.
The macro and the class behind it creates storage for a property
that is bindable inside a QObject or QObjectPrivate. The property
only uses as much space as the data contained, ie. it has no
storage overhead, as long as no bindings are being used.
Bindings are being stored and looked up in the QBindingStorage
associated with the owning object.
Change-Id: I1dadd7bddbad6fbf10cfa791d6461574b9db82dd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QBindingStorage is a class that can store a set of binding objects
for the properties of a QObject. This will get used to reduce the
memory overhead of the property system when adding bindable properties
to QObject based classes.
The binding storage has a pointer to the TLS entry containing the
currently evaluating binding. Like that we avoid repeated TLS
lookups and reduce the overhead of the property system to one
pointer lookup and one compare for the case that properties
aren't being used.
Each QObject now owns one binding storage object, that can be used to
store binding data for properties that members of the QObject.
Change-Id: I27427c03c2ba281f072e074be96147bdbcaac246
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a private QBindableInterface and a public QBindable<T>
class, that will be the API interface for accessing bindings
for properties in QObject.
The QBindable class gives access to all aspects of
the property related to bindings. This includes setting
and retrieving bindings, installing observers and creating
a direct binding on this property.
Change-Id: Iaead54d2bd6947bd2cda5052142b2a47dd8bf7c4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
These look rather weird, an explicit property.setBinding() call
is simply better in this case, and also more aligned with the API
we can offer in QObject.
Change-Id: Ifb00fd47a75e6b3bc94e34bf49e4f13249565bfe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And all related functionality. This is being replaced by
Q_BINDABLE_PROPERTY and Q_OBJECT_BINDABLE_PROPERTY in the
next few commits. The new infrastructure coming will play
nicer along with the existing property system.
Commented out some autotests, that will get reimplemented
with the updated infrastructure.
Change-Id: I50c30bd4d5c6c6b6471f8eb93870e27d86f5a009
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Rename QPropertyBase to QPropertyBindingData, as it contains the
data related to bindings. The new name fits better, as the data
can now also live somewhere else than the data strored in the
property.
Change-Id: I489efb86ad2e0bad2740c9d1aa74506fe103d343
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
