Use one QStringLiteral instead of repeating a QLatin1String(), that
was passed to a function that has to convert it to unicode; do the
conversion at compile-time.
Reducing i % 256 is fatuous when i ranges from 1 to 100.
A QFile will close() itself on destruction, no need to do it explicitly.
Especially when *not* close()ing the *other* QFile that was left open.
Change-Id: Idb39312d9c9beaf082b7cead574bc6bb9bb3a775
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Unix, we wouldn't even *try* to truncate if the file was open for
appending. The combination may be an eccentric choice but - at least
when it's combined with reading - I can imagine use-cases for it; and
we should (at least try to) deliver what we're asked for, even if we
can't think why anyone would want it. So actually enable truncation
when asked to.
Amended some tests to check this works and corrected the QIODevice
documentation of mode flags (which misdescribed the special case that
implies Truncate). Removed special-case code, to apply truncate when
writing but not reading, since it's been made redundant by the
pre-processing of mode done in QFSFileEngine::processOpenModeFlags().
[ChangeLog][QtCore][QFile] When opening a file, if Truncate is asked
for, or implied by other flags, it shall be attempted, regardless of
what other options are selected. We previously did this on Windows;
now we do so also on Unix (even when appending).
Task-number: QTBUG-13470
Change-Id: I1e08d02cfbae102725fccbbc3aab5c7bf8830687
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For keys, QSettings escapes all characters outside of [-a-zA-Z0-9_.]
by using percent encoding, and changes '/' to '\'. That is,
settings.setValue("qt.*", true)
will be written to an .ini file as
qt.%2A=true
This means that QSettings can not be used to write general-purpose
qtlogging.ini files. Fix this by applying the reverse transformation
method from QSettings when reading in the .ini file.
[ChangeLog][Logging] Qt will now accept qtlogging.ini files
written by QSettings.
Task-number: QTBUG-69548
Change-Id: I55b7a8b433291268dc6855901f72b1c04f8ee6d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I'm not sure why QSFPM purposefully emits dataChanged for a source
dataChanged that triggers a layoutChanged (i.e. due to sorting, multiple
rows are moving around). (This predates the git import in Qt 4.5.)
Surely whoever is listening will not gain much from the "small" dataChanged
after the "big" layoutChanged... anyhow, this documents the current behavior,
at least.
It also proves that the bug I saw long ago (changing a filtered-out
value used to emit dataChanged(invalid, invalid), IIRC) is no longer present.
Change-Id: I8975c549db88226b2b3393de9f8dca4f4109df15
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
More Qt-style and more natural, also, shorter names.
Change-Id: I97bd68a8614126d518a3853027661435dc4e080d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Keep the original class name around for a little longer so we can
generate the correct scoped enum in the moc output.
Task-number: QTBUG-47652
Change-Id: Ib5934316fa786cc475335b03c86b8ec2dc239055
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When we have the named keys and not just integer values, we can output
something unambiously that closer match how the enums should be used.
Output of enums without proper metadata is left unchanged
Before:
QSurfaceFormat::ColorSpace(DefaultColorSpace)
QPainter::CompositionMode(3)
After:
QSurfaceFormat::DefaultColorSpace
QPainter::CompositionMode(3)
Change-Id: I537e879ba8b5c555b2aae9ba831facc88d430443
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The copy-assign operator tests against other.d being NULL but the
copy-constructor didn't. This can only matter if the value being
copied has been moved from, so we could probably replace with an
assertion in practice, but we should at least be consistent.
Amended test to check this case too; and verified new test crashes
without this fix.
Change-Id: I46872a677775944bbdf6a9112e719873e574ae60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch renames rather awkward 'remote' into more conventional
'peer' (similar to what we have in QAbstractSocket).
Change-Id: Ifc45e538b8adf9cc076bd7aee693277829fd94dc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All test cases use QPluginLoader which will not work for static builds of
Qt.
Change-Id: I7dcddcd5213681bd3ae4cd85e49ee0bb5748f687
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Visual Studio complained about the usage of a potentially uninitialized
variable which made compilation fail.
Change-Id: I0bc9d1e47d3b00b047912164c3bc4197a2058f85
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The code I introduced in 4ee7425794 only
dealt with systems that reasonably used a 64-bit off_t parameter. Turns
out that we don't turn on largefile support on 32-bit Android, which
meant that the fix caused a regression.
[ChangeLog][QtCore][QFile] Fixed a regression that caused QFile::map()
to succeed or produce incorrect results when trying to map a file at an
offset beyond 4 GB on 32-bit Android systems and on some special Linux
configurations.
Task-number: QTBUG-69148
Change-Id: I2c133120577fa12a32d444488bac3e341966f8d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The helper application is only needed for Unix platforms, so there is no
need to build it for other configurations.
Change-Id: I4ebb896c66d3ded016f72fdbe631ec2f1276db22
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Turned it into a data-driven test, with the old start-of-time as one
row, in order to add a regression test for an alleged MS API bug in
Windows XP.
Task-number: QTBUG-12006
Change-Id: I632ecc854f50f4183a990c8a27826ede9bd20e55
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCommandLineParser::addOption returns false in case of an error.
Tests should check it.
Change-Id: I3507e1c236a15a7c0a77c0c80f8dba65b664a535
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This function can be used to create std::array without the need
to explicitly provide the size of array. It also has a specialization
that allow to generate sorted array at compile time. Sorted array can
be beneficial for example in binary search.
Change-Id: Ifc7e06e451812fce2ab94293959db5e9cc038793
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
To avoid (even more) duplicated code, "qt_test_helper" ensures the
policy of putting a test's helper application next to the test's
own executable.
The helper executable is suffixed with "_helper" to avoid name
clashes with its folder.
Change-Id: Ic50cb1daa257e7ffc75440c10a3b90fd39424683
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add a framework for reading and decoding stored graphical texture file
formats. Includes decoders for the PKM and KTX formats.
This is basically the same texture file reading that was added to
qtdeclarative for 5.11, but has been refactored to be independent of
the scenegraph and opengl.
Task-number: QTBUG-67026
Change-Id: I87d8117550d8a2112f4f58c03e9ac6b3249cbc5a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
ObjectBoundingMode has inconsistent behavior and is deprecated in
favor of ObjectMode.
Change-Id: I748f6283f3db5869bb9a67c08bf5f16abc6f95b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69599
Change-Id: I575e6f52a539e03ab37ca62e580889854ddb9781
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-68864
Change-Id: I799defcec3a41d86a604bfcd4c2e1081ae4e0e53
Reviewed-by: Simo Fält <simo.falt@qt.io>
Wrong test was blacklisted for this commit.
This reverts commit 85607bd70d.
Change-Id: Ica5272799afec88c05e2cd137835bcdcb587836e
Reviewed-by: Simo Fält <simo.falt@qt.io>
Using QFileSystemEntry::isAbsolute() broke handling of resource paths.
Extended QDir::absoluteFilePath() tests to cover absolute resource path
and some UNC variants also resolved in the same fix.
Amend existing filePath tests to use drives where needed.
Task-number: QTBUG-68337
Change-Id: I4f02cf67828ad93e562857118f8442037f18bab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A RAII style class which calls a function at end of scope.
Example usage:
auto cleanup = qScopeGuard([] { <my cleanup code> ; });
[ChangeLog][QtCore] Introduced QScopeGuard.
Task-number: QTBUG-62894
Change-Id: Ife67f5c76255a1fafbae03367263da0bac9a0070
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The "boot2qt" platform needs to be blacklisted,
not "ubuntu-18.04".
This reverts commit 0d49ac0ffc.
Change-Id: I768a66c56f5fc7e0771473152579ed1c01bbbdb9
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Eight bytes into the Binary JSON header there's a 32-bit little-endian
size, which qJsonFromRawLibraryMetaData uses to determine the size of
the stored metadata. That value is passed as a size to QByteArray, which
means certain values could cause crashes due to being too big or via
sign-extension in 64-bit.
[ChangeLog][QtCore][QPluginLoader] Fixed an issue that could cause a
crash when certain damaged or corrupt plugin files were scanned.
Change-Id: I117816bf0f5e469b8d34fffd153dc5425cec39a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It might have been fixed in the three years since it was marked
insignificant, and we can't investigate the crash while it's not
tested.
Task-number: QTBUG-50747
Change-Id: I99cdeb55e207d10fe524cd5f4868f042c64eb7d3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Kept the intended word (rather than "number system" or "numeral
system" as might seem more natural) since CLDR's
common/supplemental/numberingSystems.xml uses numbering in its name
and in the XML tag-names in its contents. Thanks to Kari Oikarinen
for noticing, in review.
Change-Id: I85077611f9de8c4e812e1b5324fa2e99868b7b95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should improve reporting and ensure we know about each failing
case, not just the first, when one fails.
Change-Id: Ic00272201f69a2fd8508df23b1d746ea605aa539
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Cleaned up some related #if-ery in the process.
Change-Id: I70f3152f2096ec34f36782fa1c3329f51c9b34f0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CSS geometry constraints such as "min-height" or "min-width"
will set size constraints on the widget.
Removing the stylesheet should remove these constraints.
Task-Id: QTBUG-69418
Change-Id: I1008e4390281c90112303d72dd7d59a8acddfcd9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Routine update in preparation for 5.12
* omitting Chakma because QLocale can't represent the zero digit,
* de_DE no longer uses vorm./nachm. but AM/PM
[ChangeLog][Third-party code] Updated CLDR to version 33.1
Task-number: QTBUG-67654
Change-Id: If20c47bb030abc3700b4f5a592152e617e2767c2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Rewrote some of them away, in the process, using string arithmetic.
Change-Id: Ie1a29abefab001889a22a8bc66c7eee608496786
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
This is preparation (the WS-only parts) for splitting up some
over-long lines, in the course of which I also fix some indentation.
Change-Id: I800490e328b5e16d40685dff04c09cd145d5eacf
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
When using actual memory allocation, limit to 64 MB, not the full file
size. On most systems, the memory map technique will work, so this won't
even be tried. In any case, we don't need the fix for the OOM situation
that was applied in commit e211ab76d7.
As for the memory mapping technique, this commit limits the allocation
to reasonable values given the virtual memory addressing space. Half a
gigabyte is probably acceptable on 32-bit systems, where there should be
a contiguous space for the OS to allocate the file in. This commit also
fixes an overflow when converting from qint64 of the file size to ulong
(32-bit on 32-bit platforms and on Windows).
For 64-bit systems, we currently limit to 1 TB.
Change-Id: I117816bf0f5e469b8d34fffd153dc1705a8eedc4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There was no public API for doing case-insensitive comparisons
of QStringView.
Task-number: QTBUG-69389
Change-Id: I1b021eefec35e135b97fb87704c8dc137232d83d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixing some issues that could cause intermittent or environment-dependent
failures. One kind regards the use of multiple QTest::mouseMove()
calls in sequence internally using the QCursor API, causing timing
dependent failures. Switching to the override that does not require the
QCursor API, where possible. Other test could fail depending on the size
of the screen.
Change-Id: I4a368955ddbb48f729dcdf74c20eb163329936b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The logic seems to be simple - if client code on error signal
tries to close TLS socket and this socket has buffered data,
it calls 'flush' and 'transmit' or even 'startHandshake' as
a result, which in turn will set and emit error again. To auto-
test this, we initiate a handshake with pre-shared key hint
on a server side and both client/server sockets incorrectly
configured (missing PSK signals). We also do early write
into the client socket to make sure it has some data
buffered by the moment we call 'close'.
Task-number: QTBUG-68089
Task-number: QTBUG-56476
Change-Id: I6ba6435bd572ad85d9209c4c81774a397081b34f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch allows the developer to pick which keyboard modifier
increases the number of steps a QAbstractSpinBox takes when the user
interacts with it.
The modifier can be either Qt::ControlModifier (default),
Qt::ShiftModifier or Qt::NoModifier. Qt::NoModifier disables the step
modifier. Note that on macOS, Control corresponds to the Command key.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QStyle] QStyle::SH_SpinBox_StepModifier allows
the developer to pick which keyboard modifier increases the number of
steps a QAbstractSpinBox takes for the following interactions:
scrolling, up/down keyboard keys and the spin box buttons. The
Qt::ShiftModifier can now be used, or the feature can be disabled
using Qt::NoModifier. Previously, only Qt::ControlModifier could be
used as the modifier.
Change-Id: Ib5518127e86a8f67798a9a1d6e860c6e35896e6f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Do not return false for loading an empty .qm file - that is, a valid
file without any translations. We're already shipping empty .qm
files for English translations of Qt since a while, mainly as a
stop for the QTranslator::load(const QLocale &, ...) logic.
Note that QCoreApplication::installTranslator() will still return
false for an empty translation file - which is ok, because it
arguably does not make much sense to install it.
[ChangeLog][QtCore][QTranslator] It is now possible to load qm files
without any translations. This is particularly useful for the
language the untranslated strings are written in; logic to
load translations can now handle the source language like all
other languages.
Task-number: QTBUG-31031
Change-Id: Ibcb84aa755538cb2fa21b14f8635295a58440bbb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This flag was introduced to serve as a replacement for a dedicated "interactive" boolean
argument in method calls guarded by Polkit.
Change-Id: Ida91c9872e70f8ca6672563d0ca6642f38c498ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To resolve the challenge of connecting Docker containers from the host
without extra user-efforts, Avahi is used to publish the Docker-based
test servers (Docker containers) on a local network. It is a free
Zeroconf implementation, and it provides multicast DNS (mDNS) service
discovery. By default, mDNS only resolves hostname ending with the
".local" domain. In this change, the domain name of test servers is
changed to "test-net.qt.local". As stated in the standard, the DNS query
for a local domain will be sent to the mDNS multicast address. It avoids
the need for root access to modify system files.
Task-number: QTQAINFRA-1686
Change-Id: I255fba0720ee6d0e84c9cb5ca9289d4466578922
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
When a screen is positioned to be above another, then the toolbutton
menu could be shown on the wrong screen if it was deemed to not fit
below the button the same screen. This ensures that it shows it on the
right screen when there is sufficient space to do so.
Change-Id: Ia626b28f74c1931904ff5b30cca17e63914d3c79
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Handle hard zero independently in each coordinate, otherwise hard zero
is never equal to anything but itself.
Task-number: QTBUG-69368
Change-Id: I8b1131472bb92efc706a04e0b067e2211a5ccb0c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QByteArray] QByteArray::toInt(),
QByteArray::toDouble() and the other number conversion functions
now ignore leading and trailing whitespaces, as their QString
counterparts already did. For consistency reasons, the same
behavior was added to qEnvironmentVariableIntValue() also.
Task-number: QTBUG-66187
Change-Id: I8b5e478ea8577b811d969286ea9e269f539c1ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and various other cleanups.
This patch re-factors tests that relied on QCursor API (directly or indirectly via
QTest::mouseMove widget overload) to use the QTEST_QPA_MOUSE_HANDLING code path.
Misuse of QCursor API causes tests to be flaky.
Removed Qt::X11BypassWindowManagerHint as it is not really needed. Based on
the comment where this flag is used, it would be needed for all test functions
that use mouse events. That assumption is not valid. A window is expected to have
received its final position when QTest::qWaitForWindowActive() returns. There were
issues with this on Unity, but those have been fixed.
Un-QSKIP-ed QTBUG_6986_sendMouseEventToAlienWidget for Q_OS_WIN.
Un-QSKIP-ed hoverEnterLeaveEvent for all platforms.
Un-QSKIP-ed bypassGraphicsProxyWidget for Q_OS_MAC and Q_OS_WIN as the test
passes on those platforms. According to QTBUG-33067 it used to crash with 5.2.0.
Removed unnecessary mouseMove() and stray mouseRelease() in mouseDoubleClickEvent().
Removed unnecessary show()/setVisible() on items that are being added to the scene -
items are visible by default.
Among other randomly spotted issues, one worth mentioning is that when adding
items to the scene after the view is already shown, we need to ensure that the scene
is updated (e.g QSignalSpy + QGraphicsScene::changed) before interacting with it. As
an example, mousePressReleaseEvent() only passed because of random luck that the
invalid coordinates were still within the bounding rect of the button. This patch
does not attempt to cleanup all instances of this anti-pattern.
Task-number: QTBUG-52546
Task-number: QTBUG-26948
Task-number: QTBUG-33067
Change-Id: I2ccbc004c1cb4f5b31c70c8568ee591c458d8446
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Similar to commit cd64a96b31 we also need
to normalize the strings before comparison in order to be compliant with
the ECMAScript test suite.
This patch also adds the remaining test cases from
built-ins/String/prototype/localeCompare/15.5.4.9_CE.
Since the same tests are also failing with strcoll/qt_compare_strings,
this simplifies the code to always normalize except when using ICU
(which gets it right by default).
Change-Id: I16b32da7fc70dc7e6725c49f66fe9941d0bf3a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This makes QCborValue more future compatible, as code written today for
tags that QCborValue does not recognize will continue to work if
QCborValue gains support for it in the future.
This change also obviates the need for reinterpretAsTag(), which I had
not written unit tests for as I knew this change was coming.
Change-Id: I052407b777ec43f78378fffd15302bdc34f66755
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing network test server has some limitations. Most notably, it
is not accessible by every Qt developer. Also, some services don't allow
simultaneous access, which causes flaky test results.
Instead of centralizing all the services to one physical machine, the
idea is to build up several dedicated servers inside separate Docker
containers.
1. Create testserver.pri and integrate it into the make check command of
Qt Test.
2. Define QT_TEST_SERVER flag for changing test parameters at compile
time.
Task-number: QTQAINFRA-1686
Change-Id: I0422ddb97eb8c11b4818771454851d19671253b1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
According to RFC 6347 a DTLS server also must retransmit buffered message(s)
if timeouts happen during the handshake phase (so it's not a client only as
I initially understood it).
Conveniently so an auto-test is already in place and needs just a tiny
adjustment - handshakeWithRetransmission covers both sides.
Change-Id: If914ec3052e28ef5bf12a40e5eede45bbc53e8e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Variable was declared outside #if-ery but only used inside,
leading to warnings when the define wasn't set.
Change-Id: Iad6a236bdf76b8ca0a58a84509d19f7e1a3e2df2
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
Change-Id: I9b07208413b9e101569a22505ad41f07ade4062b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
This matches an earlier fix for tst_QDateTime.
Change-Id: Idaf34a9d60d84202fd41d15455209457cc281f60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The compiler was generating some vectorized code for qresource.cpp but
it wasn't very efficient. So improve upon it and make use in other
places where we read UTF-16BE strings.
[ChangeLog][QtCore] Added an overload of q{To,From}{Big,Little}Endian
that operates on a memory region.
Change-Id: I6a540578e810472bb455fffd1531fa2f1d724dfc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Questions:
1) should QCborMap::extract return value_type (a pair) instead of just
the value?
2) should the both return the iterator to the next element too, like
erase()?
Change-Id: I052407b777ec43f78378fffd15302a9c14468db3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change only adds them to the registry and reserves the IDs. The
next commit will handle conversions.
Change-Id: I56b444f9d6274221a3b7fffd150d2d49f40940c2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Similar to the changes made for tst_QLibrary:
0ac09c40f2
but even less intrusive.
Change-Id: I4bc0ba385e639f07f9b39cf8ba9542c27be8a3ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Writing out one test result per line in the test data files is
excessive and only bloats the log, given that this algorithm
is rarely changed.
Task-number: QTQAINFRA-2037
Change-Id: Ib9e568c7ded73d45e4b64671e97d5581a74f8f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes ambiguous template instantiation for types that derive from both
a QObject and Q_GADGET. For such types we treat them only as QObjects
as they extend the functionality of the gadget.
Task-number: QTBUG-68803
Change-Id: Ic42766034e14e5df43c4e6f7811e2c0be1dc7e74
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
To make the minimum amount of changes:
- Extract the library files into the expected hierarchy.
- Introduce a variable with the path to the directory.
- Make the static function a member function so it can use the variable
Change-Id: Ibf3106c3606d198a8deb8cb2a5cbde57207221c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes sure the tests are skipped on Wayland.
Task-number: QTBUG-62188
Change-Id: Ia50d6cc02fbbac0fb6b77a16eb6372c1adb422d8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Input value which is over the highest acceptable value, but consisting
of a number of digits equal to or less than the max value should be
considered intermediate.
[ChangeLog][QtGui][QIntValidator] Input value with over the highest
acceptable value, but with equal or less amount of digits than the maximum
value is now considered intermediate.
Task-number: QTBUG-59650
Change-Id: I71a77c9c266f0f3b62c71ac6cb995019385c1cf5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
If a display is placed above a primary screen which has the top left set
to be 0x0, then menus that are defaulting to go up can still be
displayed on that screen when the menubar is placed on the bottom of it.
This ensures that this is the case and also adds a manual test to aid
verification of it in the future.
Change-Id: Ib657ccdc1aabfe1586c72585c087ac80a6c632c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The existence of the helper application confuses Coin which will
result in an error.
Change-Id: I3edf3f27acbe133b180d41a8ae950991e9a5b5da
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test and its helper were removed some time ago.
Change-Id: Id82a2a1bf829f272e9c1447e697935934c923092
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I017b501506c54c4b89773d2b949c097598bc7049
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I53d5238ff36706eb9c6f8eb04b954ec595ca30de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I55078563304959c41e0dd9bb7bb91a6fc51e005a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "app" subfolder was already excluded in the .pro-file but Android
supports QProcess, so lets include it in the build. Unfortunately it
currently has trouble and crashes (the child process or both processes).
So we skip those tests.
Task-number: QTBUG-68596
Change-Id: I2e6d0869c408bf08b22c02145db8ce522c64c617
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Same issue as has been seen a few other places: path to executable being
wrong, and then a crash when the paths are fixed.
Change-Id: I77a596c6e52d2a02a69a6b9dfe91f878b3ffe07c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTableView::doItemsLayout() updated the scroll offset for the vertical
header after layouting was done. Since the scroll offset affects the
viewport of the editors, the adjustment was done too late.
Therefore we update the scroll offset right after the scrollbars are
set inside QTableView::updateGeometries()
[ChangeLog][QtWidgets][QTableView] Fixed calculating geometries
for editors
Task-number: QTBUG-48244
Task-number: QTBUG-49548
Change-Id: I3b057764cf99d42d861928a1c73277d34b440f9a
Reviewed-by: David Faure <david.faure@kdab.com>
It was observed on OpenSUSE VM in CI - apparently, even after succesfull
read from UDP socket error was not UnknownSocketError. While it's under
investigation, the DTLS auto-test should limit itself by DTLS things and
barely test IO success (socket-wise) when needed.
Change-Id: I0773a02c591432b0d6c894f4131f70e41dc7ed72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It all started from the compiler's warnings about 'this' captured but
not used in lambdas. While fixing this it was noticed that 'client' socket
has a lifetime longer than the test case itself (the socket has a parent,
which is tst_QSslSocket object). The 'server' socket was simply leaked.
So there is no guarantee that some of them (or both) later, after the
test failed in one of QVERIFY, for example, does not emit 'encrypted'
upon receiving more data; this will result: in reading/writing from/to
invalid memory location (captured local 'encryptedCount') and/or probably
exiting event loop when it's not expected to do so.
Change-Id: I51de0493d989a5ba36de2cef58d35526c0e26cda
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QTest::addRow expects a format specifier; this usage makes GCC complain
with -Wformat-security. Use the "old" newRow call instead.
Change-Id: Ieed8e4f64ff5e3d0d4e87325629d20ed6839ff9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Using SSE 4.1 because of the need for PMINUB.
Change-Id: Ib48364abee9f464c96c6fffd152ebd3f8ea7fe94
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
With ICU and on macOS it appears that the comparison is done on a
canonical form, while CompareString(Ex) does not do that, as the added
test verifies. Explicit normalization fixes that.
As a bonus, this also unifies the code path between regular Windows
and UWP by unconditionally using CompareStringEx (which requires
Vista or later).
This issue surfaced while running the ECMASCript 6 Conformance Test
Suite in QtQml.
This re-uses the existing test for localeAwareCompare, which was
disabled on Windows, macOS and Linux with ICU (the common case).
Change-Id: I52440fce60b54745ead1eff005ec51e98e2a79ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I034752b4e5d22b98f6def95fb53c2b1947dded03
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When testing zones "America/Mazatlan" and "Mexico/BajaSur" the test
crashes from an assert. Skip testing the zones for now.
Task-number: QTBUG-69132
Change-Id: I595089647792e9a2c094d63cb837584b8cdc9cb9
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The previous approach of having the signalbug helper in a subdirectory did
not work for shadow builds, as QFINDTESTDATA would not find that dir. By
putting both test and helper into the same directory, the helper will be
found in the test's current working directory.
The second problem was that not putting executables into debug/release
subdirectories might have lead to the WinRT AppxManifest being overwritten
by the wrong configuration. When Qt is configured with -release for
example, it was possible that the debug manifest (Manifest files are
always created next to the target) is written last and thus contains
debug VCLibs as a dependency.
Change-Id: Ia39315432860405642542449296c16dd2ae9fa9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Skip a few tests that Android's time-zone information doesn't suffice
to get right.
Task-number: QTBUG-68835
Change-Id: Ibf8d213c96b29d74fc478a0ede686ae52b5200fb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original code was added by b316c3ac5e
(in 2012). This patch changes two things:
1) We now rely on WM to position a window based on the set gravity. It
should not be necessary to calculate coordinates manually as was done
in windowToWmGeometry(). We don't even know the decoration size before
the window is mapped.
2) We now update gravity whenever needed instead of hardcoding based
on what Qt APIs (setGeometry vs setFramePosition) where used to set
the initial window position.
The patch from b316c3a says:
"Determine gravity from initial position. Do not change later as
it will cause the window to move uncontrollably"
Since it did not elaborate on the situation, we can only assume
that it was caused by another bug in Qt at the time or perhaps
a broken WM. From [1]:
"Applications are free to change their win_gravity setting at any
time. If an Application changes its win_gravity then the Window Manager
should adjust the reference point, so that the client window will
not move as the result."
Tested on Ubuntu/Unity, KDE/KWin, Gnome-shell/Mutter, Lubuntu/OpenBox.
Works as expected everywhere expect Unity. Unity seems to ignore
XCB_GRAVITY_STATIC and treats it as XCB_GRAVITY_NORTH_WEST, which means
that setGeometry/setFramePosition produce the same placement on this WM
(the behavior was the same also before this patch).
P.S. Also renamed xRect -> rect, which was a leftover from
ae5f2a6672
With this change we can un-blacklist QWidget save/restore geometry
auto tests.
[1] https://specifications.freedesktop.org/wm-spec/latest/ar01s09.html
Task-number: QTBUG-66708
Change-Id: I381eef5d34dddb04de16a897ce5540b9c430b216
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Where possible. Sometimes the replacement is QTRY_COMPARE instead.
Also don't use QTestEventLoop directly when it can also be replaced with
QSignalSpy use.
Remove the TimerHelper class, since its uses can be done with QSignalSpy (and a
lambda when remainingTime is checked). Although checking static single-shot
timers still needs a target object, so use a stripped down version in those
tests.
remainingTimeDuringActivation() was not actually testing the repeating case, but
single-shot case twice, so fix that. In the repeating case the remaining time is
exactly 20 ms on my machine, but QEMU emulation seems to be slow enough for time
to advance before the lambda is executed, so relax the conditions.
Task-number: QTBUG-63992
Change-Id: Iae92ff7862a13d36e695eec63b54403ec872f2b4
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: I86640b22c9e7a258965805a661e1e8c3ead8d012
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: Ia7fda4c42d4aeaecd4485d18383cf46bf6af63d1
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as specified in the documentation. This was a regression from Qt4
and can cause mouse cursor flickering durig dragging on e.g. custom
widget where some areas of the widget do not accept drag-and-drop.
Task-number: QTBUG-67155
Change-Id: Iaa6f9407181931ed8e3d6a8fec13fd59d3c8625d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This was a regression from Qt4 and also is the documented behavior.
In addition this patch fixes various issues with cursor shape updating
that were discovered along the way and that are necessary for testing
the new changes.
The code in QGuiApplicationPrivate::processDrag() also needed a fixup,
particularly the resetting of QGuiApplicationPrivate::currentDragWindow.
Without this fix we would get DragMove (the one that immediately follows
the DragEnter) only for the first DragEnter event. For example when dnd
starts on mouse press then for mouse click we would get:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragLeave
but the expected is:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragMove->DragLeave
Task-number: QTBUG-34331
Change-Id: I3cc96c87d1fd5d1342c7f6c9438802ab30076e9e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
A follow-up of 9d078c8f147ea875e862360b0d7480201fbbcff7 in qtqa repo.
Change-Id: Ib7c1f5cf325e9ad0066aae139b0dc72bc0184b32
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Need to do the same for startsWith() and endsWith(). indexOf() is a lot
harder.
[ChangeLog][QtCore][QByteArray] Added compare(), which takes
Qt::CaseSensitivity as one of the parameters. This function is more
efficient than using toLower() or toUpper() and then comparing.
Change-Id: Ib48364abee9f464c96c6fffd152e69bde4194df7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When an internal DnD occoures in IconMode, the item is moved to it's new
place but the logic in filterStartDrag() has no clue about the fact that
an internal move happend. Therefore the item gets deleted. Fix it by
changing the event's drop action to Qt::CopyAction to avoid the deletion
as it is done within QListWidget DnD code.
[ChangeLog][QtWidgets][QListView] Do not delete item on internal move.
Task-number: QTBUG-67440
Change-Id: I873d3c9fa76e107e108d9af0dcf8cecd1e18a18f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
After the move to PCRE2, optimizing patterns has been a thorn in the
side due to the fact that PCRE2's JIT compiler modifies the pattern
object itself (instead of returning a new set of data, like PCRE1
did). To make this fit with the existing behavior, a read/write
lock was introduced, with the read part locking when matching and
the write when compiling (or JIT-compiling) the pattern.
This locking strategy however introduced a performance issue,
as we needed:
* to acquire a write lock to compile/optimize the pattern (incl. the
common case where the pattern was already compiled, so bailing out
immediately);
* to acquire a read lock during the actual match, to prevent
some other thread from optimizing the pattern under our nose.
This was due to the "lazy" optimization policy of QRegularExpression
-- optimize a pattern after a certain number of usages. The
excessive amount of locking effectively limited scalability.
Simplify the code, and drop that policy altogether: since JIT
compiling in PCRE2 is faster and pretty much "always recommended",
just always do it for any pattern (unless it gets disabled via
env variables) when compiling it.
This allows to go back to a plain QMutex, and now the actual
matching doesn't require acquiring any locks any longer. Of course,
there is still a mutex acquired just before matching for checking
whether the pattern needs recompiling in the first place; this can
probably be further optimized via double-checked locking (using
atomics), but not doing it right now.
This shift makes a couple of pattern options controlling
optimization useless, and allows to centralize the 3
QRegularExpression tests (which were actually the very same test,
just setting slightly different optimizations strategies).
While at it, install a stress-test for threading, with the idea
of running it under TSAN or helgrind to catch bugs in
QRegularExpression's locking.
[ChangeLog][Important Behavior Changes][QRegularExpression] Regular
expressions are now automatically optimized (including JIT
compiling) on their first usage. The pattern options
OptimizeOnFirstUsageOption and DontAutomaticallyOptimizeOption no
longer have any effect, and will get removed in a future version of
Qt. QRegularExpression::optimize() can be still used to compile and
optimize the regular expression in advance (before any match), if
needed.
Task-number: QTBUG-66781
Change-Id: Ia0e97208ae78255fe811b78029ed01c204e47bd2
Reviewed-by: David Faure <david.faure@kdab.com>
Before the fix is applied this test fails because QFINDTESTDATA will
return "/usr/" instead of the folder with the same name in the current
directory.
The 'usr' folder can't be located 'next to' the application since this
does not trigger the issue (QFINDTESTDATA looks for the folder next
to the executable early on). So we put it in a subdirectory and change
the current working directory to its parent directory.
Change-Id: I627679dcb6f2f6954264e23bfc1a71de3bff7203
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The ObjectBoundingMode coordinate mode of QGradient allows specifying
the gradient coordinates relative to the object being painted. But if
the gradient brush also has a transformation, that transformation is
applied in the logical, not object, coordinate space. That behavior is
counterintuitive. However, changing it now would break existing
code. Instead, we introduce a new coordinate mode enum with the
expected behavior, and document the old one as deprecated.
This prepares to fix the bugs below in qtsvg, by making
it possible to specify the same behavior in Qt as SVG has.
[ChangeLog][QtGui][QGradient] Add ObjectMode coordinate mode
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 18 to account for changes in the serialization of QGradient.
Task-number: QTBUG-59978
Task-number: QTBUG-67995
Change-Id: I8820a2555359812f3e1a46e37d6ac2cc29a2091d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
winrt still has some issues with some character sets. These
tests are skipped/blacklisted for now and will be investigated.
Task-number: QTBUG-68297
Change-Id: I898e3383a4673b6dc87815a75e705f3302a4cbba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A change between 5.11 and dev has modified the position of testqrc
inside the resource list. Adapt accordingly.
Change-Id: I697103f4b8c9e93bb613e814c47a4e68e9a997ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In order to get winrt CI checked, the network tests are being skipped
for now. As soon as winrt has landed in CI, these will be fixed and
re-enabled.
Task-number: QTBUG-68297
Change-Id: I692d72f9e0c97840bd7396551b4e707eec845ebb
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test is somewhat similar to tst_QSslSocket but is smaller (in scope, will
grow in future), it has no QTcpSocket/QAbstractSocket-specific things and
has more DTLS-specific code. At the moment it does not use our network
test server, all work is done in the same process with two QUdpSockets
and two QDtls objects. We test (both on client/server ends):
- parameters validation (for all functions that do this) and
the correctness of error codes/handshake states
- handshake procedure (with/out certificates and with pre-shared keys)
- timeouts and re-transmissions during (D)TLS handshake
- peer verification (and related verification errors)
- aborted/resumed handshake
- encrypted I/O
- DTLS shutdown
For now, this test is OpenSSL-only.
Task-number: QTBUG-67597
Change-Id: I27006bfe3d6c02b89596889e8482a782c630402a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... by adding a prefix to the resource.
On android there is a resource ("qpdf") which gets included in the root
in all applications, included from "src/gui/painting/painting.pri".
So we move the test data to a sub-folder.
Task-number: QTBUG-68596
Change-Id: I67f2ed79a32c68d9a76cafba8ef23fe0da7c0fe8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"terminate" and "terminated" both fail on Android since
QThread::terminate not supported on Android. So we should skip them.
Task-number: QTBUG-68596
Change-Id: Id0d1dde2cfa02bb2978e5dd16087bf8f3bf112b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_QDateTime::springForward(), we test correct handling of times
in the gap; these are formally invalid and a mktime() implementation
may reasonably reject them causing our date-time code to produce an
invalid result. So handle that case gracefully in the tests, only
insisting on consistency between the two ways of preparing the date.
In one test, package the repeated code I was going to adapt into a
macro to save repeitition.
Task-number: QTBUG-68832
Task-number: QTBUG-68839
Change-Id: Ib8a16ff007f4e75ab2ccff05b1ccf00a45e50dc8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android doesn't use the proper zone-abbreviation, so just check it
starts with the right date-time. Revised the way the #if-ery for that
is handled, to avoid repetition of the (now more complex) condition in
the two tests affected.
Task-number: QTBUG-68833
Change-Id: Iceb5469f46c69ba5cdbaf7ca050ad70f2bb74f44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
