When verifying nonzero results (i.e. that something expected *did* happen),
using these macros allows bailing out of the timer much earlier than the
potential 5 seconds.
My running this on Linux goes from ~147 seconds to ~91 seconds.
Change-Id: Ie1e41252eb4eb295b5c8e795ded02f00eb7f9387
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.
Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_VERIFY() to fail after a reasonable timeout rather than putting
the test into an infinite loop.
Change-Id: Ie0917556e15999a94cc0587f3f4c11c0d743a228
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Register the meta-type in initTestCase(), which is run once, rather than
in init(), which is run before every test function is run.
Change-Id: Ic62a2469da6a2a85254ffc7c4d893395202c50d8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The threadCount() test function is unstable and had been disabled by
making it not be a slot. It is better to disable it with QSKIP so that
the test output shows that the test function exists and is in need of
repair.
Change-Id: Iccdc8da31e0d15d922f7e9606835d1ff1a3a4966
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Avoid using bug tracker identifiers in test function names. These
identifiers lose their meaning when the bug tracker is replaced.
Change-Id: Ia867f7c2ec2ab9ed546588843d532ac615a34031
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored test data was marked as failing, but appears to pass, and
the available history does not explain why it was commented out.
Change-Id: I7e9e3ba72fc8fef42c91ee882efa98d25b3d8317
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTestLib-based autotests cannot perform verification steps in the test
class constructor. This needs to be done in initTestCase() instead.
Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.
It is a quite handy overload in many cases.
Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After 8fd64d22ac (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.
This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.
Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.
Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The test was skipped, but still tried to compile code that uses
exceptions. The throwing class it uses was conditionally compiled
out earlier in the file, causing an error for undefined class.
Task-number: QTBUG-23028
Change-Id: Ia2e05a8a0abbf0e913f6c41e85bfee8b85cbc8a5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
For some strange reason "Object::method ..." was printed, without
the leading Q.
Change-Id: I10b99e8aa8730e4020d15b3e04a01004bade76c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On Windows, the signalbug.exe could not be launched since it is
not next to tst_qobject.exe, which is in one of the
'release', 'debug' subfolders.
Introduce a subdirectory structure similar to that of
the QProcess test and use QFINDTESTDATA to locate it.
Change-Id: Ie8f2ede8cb76f22a908cb77517a74076be11fbb7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When starting new animations with existing animations running, ensure
we force an update to the timer first, so that the new animations can't
mistakenly start with a very large delta.
This fixes tst_qdeclarativeanimations::alwaysRunToEndRestartBug failure
on slow machines.
Change-Id: Ida4e5dcf0ff792e6bfe0d244b6e969d04d0b20fa
Reviewed-by: Martin Jones <martin.jones@nokia.com>
Updated three instances were not using QFINDTESTDATA.
Change-Id: Ibd0f6734791fc5d98ebeb65ac3bd80aa1c076414
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If both a stop and start happen within an event loop, ensure they are
processed in order.
Based on a patch from Charles Yin.
Task-number: QTBUG-22865
Change-Id: I6131bd43a6ba5ad4fa37c863a9f4598bf2ac0e01
Reviewed-by: Leonardo Sobral Cunha <leo.cunha@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
This also adds a unit test for length()/count()/size(), since there wasn't one
testing it explicitly.
Change-Id: Ifb7f113aa97beef5f76e5fb246eb38495344b0ad
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marco Schmidt <Marco.Schmidt@Taugamma.de>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The test generates the runtime_resource.rcc data file at build time. Add
this to .gitignore.
Change-Id: Ief4057072b28499049147b86f166523b71afe269
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Check path/fileName is empty upon failure, variable was unused
- Use /home instead of /, as / is writable by admins on Mac
Change-Id: I705471fda8b73843e98b30eb52aa0a73634ec075
Reviewed-by: David Faure <faure@kde.org>
The executable needs to be in the test directory
as it expects it sub-executables from there.
Breakage introduced by 3385fb91e1
Change-Id: Ic1f3db70851f65e2f12041c3a16cb8f0b7bdf35e
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Commit a72468e820c2922540737c053eef27d033c2e77b split the test into two
functions, but kept them combined in a single slot for QTest to invoke.
That being the case, we might as well have them as test functions of
their own right. Should work nicer with test failures, skips and such.
Change-Id: I62c1fc7777c08b3e87a5903632d73dc1e1d97e1a
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
In case a subprocess fails to start.
Change-Id: I1372c07de8f3580a8e7aadd6874da15bf273ac53
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Target names with spaces must be quoted.
Change-Id: I913ef386353fc75991c8db4e3205ab511fc1f1a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
To follow the comments in the review by João Abecasis.
Change-Id: Ie566705d3b4071b8628d269246aadcde4866f34f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
mkdtemp(10*X) replaces all 10 chars on Mac, while on linux it only
replaces the last 6. Adjusted the too-strict tests to allow for
both possibilities.
Change-Id: Ie6d57bd4947254ad7a39e75ac0e8881cebeaa428
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
When using clang, the forward-declaration test fails to link, unlike
with other compilers. The standard says that deleting a forward-declared
pointer is undefined behavior, so the link failure is a valid result of
trying to do so.
Change-Id: I527b91c15b7d51d9522d95af0630e7dacd26bb30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As discussed on qt5-feedback / development lists.
Change-Id: If1733369d12daa29054776ec2cbd78e63679768e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
After commit 79f675a1e0, the connect and
disconnect callback API effectively becomes useless. Now that these
callbacks cannot/do not, it makes little sense to keep the backdoors
added for Qt Jambi support.
Remove them for now. Should the Qt Jambi team want/need to port to Qt 5,
we can re-add them, possibly designing a better API for doing so as
well.
Change-Id: I6209a1d647d683c979d5294b632b8c12c0f9f91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.
Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.
SC-break-rubber-stamped-by: Lars Knoll
Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails if the repository is checked out with
Windows line endings. Try to work around.
Basically, ensure that common developers can conveniently
run the test.
Change-Id: I91f31b830ba7ba305deea782737d4e07a89420eb
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This is sent when the object's name changes.
tst_moc must be updated since the method count of QObject has changed.
The test assumed that there were 4 invokable methods in QObject. The
new signal is the 5th, which breaks the test's assumptions. Fix this
as well.
tst_QObject must be updated since the
QObjectPrivate::isSignalConnected() method only supports the first 64
signals. With the addition of this new signal, sig61() in the test
becomes the 65th signal, and will always appear connected now.
Task-number: QTBUG-13999 (related)
Change-Id: Ie87893c71a231fafa7ccf2f16102238a7be8327a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
By adding anonymous namespace and static linkage we are reducing
visibility of implementation of these macros.
This patch also fixes warning about a declared but unused variable which
was issued by gcc 4.6 for Q_CONSTRUCTOR_FUNCTION.
Change-Id: I2cb70ad4c93f6f77e5518420abcce6fd4cadccfa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
On Windows (only), this test depends on some Q_AUTOTEST_EXPORT symbols.
Change-Id: I3b2ef8dcd56b8860f02fc28f45823b889e794909
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QString autotest shares test data between the remove() and replace()
tests because those functions are very similar. Unfortunately, when an
integer overflow bug was found in remove() the regression test was not
shared with replace(), which prevented the same integer overflow bug
from being discovered in replace().
This commit improves the test by sharing the overflow test data between
both functions, thus demonstrating the remaining bug.
Task-number: QTBUG-22967
Change-Id: I2778249800f74799d890eefa9227ca8ddd8fbaa3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename the qUncompress test to make clear that the test only deals with
uncompressing corrupted data and add a message making it clear that this
test will produce some warning messages.
Don't skip creating the test data, as that prevents the test output
reporting exactly what is skipped.
The expected output is the same for every row (an empty QByteArray), so
don't bother storing that in the data table.
Change-Id: I59f1cc91a941bcaadacb2a613dd5eca2564961c1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWinEventNotifier is an essential class if you're using native Windows
Overlapped IO and need to convert it to Qt signals. However the header
is marked private.
Task-number: QTBUG-68
Change-Id: I22e9a84da97f969ddb82e9ba15e604a01abd80d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
For compilations without variadic template support
Change-Id: I78af4f6022ad7a0923e5c5788a34eb7d834f50f3
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Remove references to the old bug tracker. The data from the old bug
tracker is no longer accessible, so these markers are meaningless.
Change-Id: Ib9d029d52b70fd0a512b9532d65f03763eabfe57
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For queued connections, the args[0] is set to null as it make no sens to
forward the return value to the signal.
So we need to check in the operator, that the pointer is not null.
(container.data is args[0])
Change-Id: I80bde66f1ec19de0f4962c80e5b2797d2819075c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This commit also improves the related documentation a bit.
The test is copied from the test with the old syntax, but all the
connection statement are changed to use the new syntax
Change-Id: Ia5630ca4335b9f8ca6d724ae3c8750d6f0804d8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Before, the constructor was called for complex objects, but
POD were left unitinialized. Now, they are zero-initialized.
Also add test for return values
Change-Id: Iff9bf6687589d7b7395a71fb6f650ab8aa2b6bd1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This add an overload to disconnect which is symetrical to the new
syntax of connect.
It is possible to diconnect connection like this:
QObject::connect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
QObject::disconnect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
This overload only work with pointer to member function, and not static
functions or functors.
The test is copied from tst_QObject::disconnect(), just
changed the syntax of the connection and disconnection
Change-Id: Ia8f819100cb12098e32877522b97b732b1e676a8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Partial revert of 94fc875079. All dependent
modules need to be specified in the QT variable, except core and gui, which
are there by default.
Change-Id: Ie8ffed56de03a37da191772fa321ed162e44a50d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
MSVC cannot decide on an overload for pow().
Change-Id: Ied3fbc0de403774d9f85738852cf671ce42cd1c1
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Don't name test functions using task identifiers from obsolete bug
trackers.
Change-Id: Iba6ae8ad3b39e365c5510ed5c86749a167572829
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
if given char*, QCOMPARE will try to compare the strings pointed by the
char*
In this case, the char* just point to garbage, we just want to compare
the addresses.
(Was changed in commit 6fcfae99d3)
Change-Id: I9edb2b676aedf67a252aea6a41d56cd1eef7befc
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Use QVERIFY2 to include errorString() in the failure message.
Change-Id: Iecb4e7694c3d71bfb786908a6a6c26b187d60c8f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Four of the modified files only use functions from network-settings.h
on Windows, and the other three files don't use anything from that
header.
Change-Id: Ifa4b0319d14367735b859e538921fa0eeeccce1a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Commit f4b6628083 fixed it on windows.
Now test it work within QAtomicPtr
Change-Id: Ibf5c31a133d6d544a78ce626fac9085b73c97fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Bug trackers come and go, so using bug identifiers in function and test
case names will ensure that those names eventually become meaningless.
It is better to choose a meaningful name and provide explanatory
comments where appropriate.
Change-Id: I67c27782ef21b5d4eaab4854079a043c8ef6957b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Those tests are the one from Thiago's C++0X implementation
The rvalue references ones are commented out because moc do not
understand them yet
But supporting them may come later.
Change-Id: I6b0720e7f2992be9f7e34770960fa58fa456a54b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaCallEvent now can handle a pointer to QSlotObjectBase
Change-Id: I94da1e68ce9bb1fd96a9ae013a389552eb625faa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to the old connection syntax, you can now connect using function pointers.
connect(sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
You can connect also to functor or C++11 lambdas
The connections are now type safe (no more problems with namespaces
or typedefs). Implicit type conversion is also supported.
The new syntax forces us to change the meaning of signal form
protected to public, in order to be able to access the signal's
address everywhere
The way it works is by introducing new overload of QObject::connect
that take function pointer as parametter. Those new overload are template
function, that are implemented inline. The actual implementation is
in QObject::connectImpl which take a QObject::QSlotObject* as parametter
for the slot. That slot object contains a virtual function which call
the slot which has to be implemented in the header as it depends on the
template parametter. So the internals of QObjectPrivate::Connection
will store this QObjectSlot* in order to be able to make the call.
You can read a full description here:
http://developer.qt.nokia.com/wiki/New_Signal_Slot_Syntax
History of commits before it was imported on gerrit:
https://qt.gitorious.org/~ogoffart/qt/ogoffarts-qtbase/commits/qobject_connect_ptr
Thread on the mailing list:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000796.htmlhttp://lists.qt.nokia.com/pipermail/qt5-feedback/2011-September/001248.html
(The discussions on the mailing list were about trying to find a
solution that do not need making signals public, but no user friendly
solution was found)
Note: support for QueuedConnection, and the symetric QObject::disconnect is
added in another commit.
Qt::UniqueConnection is not supported yet in the new overload.
Change-Id: I67d08436b0720e7f2992be9f7e34770960fa58fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
From a bool to a handle to to connection.
Also added a new overload of disconnect that disconnect a handle
This is required because with the new syntax taking lambda or functors,
it is the only way to disconnect a connection (as it is impossible to
compare functors)
The new return value is QMetaObject::Connection, it is a wrapper around
the internal QObjectPrivate::Connection.
QObjectPrivate::Connection is now reference counted.
tst_qglobal.cpp:
This test set up an internal callback, and the callback do not set any
proper connection handle (and tbh, it would be hard for it to do so).
So the returned QMetaObject::Connection is invalid, and ok is false
(Internal callbacks are only used for jambi and should probably be removed)
Change-Id: I111626fb4f47efc4db5e2ea5bff9da15f08fea7b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows for more focussed notification of what part of the
model has changed layout.
The slots in the proxy models can be more optimized later.
Change-Id: I1bd17465b4be6f8efdc107036db897c557fcb519
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The modified test was using QVERIFY in the destructor of a local class,
but QVERIFY should only be used directly in a test function. This
commit changes the local class to record the result of the test and
verifies that result in the test function.
Change-Id: Ie68ac6aa880368c961ebfa67cd452f0fbf26db89
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In the QProcess test, QHostInfo is used as a quick and easy way to
create a background thread, and so is not (entirely) unnecessary.
Change-Id: I7204f113e7bc8a4b312d5a20f0a6ee076c56b35d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
libstdc++ provides the fenv.h found and for uclibc default toolchains
the bits/c++config.h has _GLIBCXX_HAVE_FENV_H undefined leading to
no import of the uclibc fenv.h
Change-Id: I53173b099f3d8791f527f1ccb60991de57cd19db
Filed: https://bugs.busybox.net/show_bug.cgi?id=4484
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
The removal of plugin cache in qt5 (8ed47d961d)
means that only the original loading error (from QElfParser) is reported.
In Qt4 this was previously two different strings depending on if the library
had been previously cached.
Task-number: QTBUG-22834
Change-Id: I15a4adc7d0f8f23f16bb2aa8ba8b968db770f074
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTimeLine::reset() never made it into the public API. Instead
QTimeLine::start() always starts from the beginning.
Remove the commented-out test for reset() and related remnants in other
tests. Restarting a timeline using QTimeLine::start() is already tested
by the restart() test function.
Change-Id: Ia5c767ddae0781d645a407fbea76e80672895aab
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Before QTimeLine made it into the public API, the toggle() function
became toggleDirection() and isReversed() became the more generic
direction(). This commit uncomments the old toggle() test and uses the
final function names.
Change-Id: Ie3379f32ff0c78436f33c2733232d795ca88152b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored test data was commented-out before the tests were imported
into the Qt repository in 2006, but appears to be valid and passes on
Linux.
Change-Id: I75795bf2b0b45fc2331bca6ac8d89f57cf12ed3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed data was copied from the QString test (from which it has
since been removed) and wasn't valid, as comments indicated.
Change-Id: I44f066e41d28333326ad97f652c0a6813a173f15
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed test functions were all empty and have been commented-out
since the tests were imported into the Qt repository in 2006.
Change-Id: I4ce86440aed355352a26ebefeafc95eeda1efbdd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed test data is invalid for the toString() test function --
QUrl::toString() won't eliminate relative paths from URL's, you need to
call QUrl::resolved() to do that. Add this test data to the test for
QUrl::resolved(), as the existing tests don't seem to cover the case of
a complete URL containing a relative path.
Change-Id: Idb0f4eac9cc75258a8e17f10fa95ddb75f01d470
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows more granular reporting of what has changed.
This change is binary incompatible and source compatible.
Change-Id: I7c5beaee651a24780cc94e41383f7a80210bc603
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is the first change to re-enable the autotests for the individual
qtbase modules. This means adding subdir.CONFIG=no_check_target for each
module (except corelib) in tests/auto/auto.pro instead of in
tests/tests.pro
QFileSystemWatcher, QIODeice, QSettings, QTextStream, QSocketNotifier,
QVariant, QPluginLoader, QLocale: These tests currently fail, which
will block any changes that attempt to re-enable the autotests. Ignore
the failures for now by marking them as insignificant.
QAbstractItemModel: This test currently crashes, which can
destabilize the CI system when attempting to re-enable the autotests.
Skip this test for now by disabling the check target for it.
Change-Id: Ie5147d5c5cfae5e7d0a495d5c4788ce92fe2e6d8
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The removed code has been commented-out since Qt 4.0 and relates to
QCOORD, which was part of Qt3Support and has thus been removed from Qt5.
Change-Id: I4651738d505234abe9b79ef5045c55cbf132a88e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have been commented-out and empty for more than five
years.
Change-Id: I52d6dc0366cd8eae8701b05e4c66e9911bf7e8f7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored code verifies the following statement in the documentation
of QHash::find():
"If the hash contains no item with the key, the function returns end()."
It is not clear why the code was commented-out in the first place, as
this occurred before the tests were imported into the Qt repository in
2006.
Change-Id: I745393a8e3e728fc60009da07abd038a3d56e99c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored code was inexplicably commented-out by commit d57aec33
(non-public history), which was only supposed to be changing upper-case
booleans to lower-case.
Change-Id: I1581fc89511f600c614871e1aec6bc030cddf40e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already disabled because it tested API that never
made it into an official Qt release -- see commit f7d69d75 in the Qt 4.x
history.
Change-Id: I4f7eb20f937bdabfcac92842c5804233dca26a23
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already disabled because it tested API that never
made into an official Qt release -- see commit ad1441fc in the Qt 4.x
history.
Change-Id: I7dbfb83c82bdb79e8d3f7f6c7043d76913dea589
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QVERIFY2 so that the test output shows the full error string when it
does not contain the expected sub-string.
Change-Id: I31f91bd5c47c082aacabd2333bc12137bc4d24a6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, the user had to recompile the test with an additional define
to see the plugin loader error string. By re-ordering the verification
statements, we can ensure that the error string is visible in the test
results whenever its value is not the expected value, thus eliminating
the need for conditional diagnostics.
Change-Id: Iae9ef0b7cbad551fd56f0e0439eaad034f2420e3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already commented-out when it was first added in
2007, and would not form a useful test as it was not followed by any
verification steps. QLibrary::setLoadHints() is tested elsewhere, so
this code can vanish.
Change-Id: I1c4dcaacaf31b0f38136336414cfbe3de1a406f3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed data duplicated the first row of test data in the same
function.
Change-Id: I5d55b970d072d58c170b3ed3004c1661c6d0d13c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was for Windows versions <= 2000, which are not
supported by Qt5.
Change-Id: I779ffb8427035b7eb97d8d0af403d03065bc779c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Naming a test function "_data" is potentially confusing as that string
is a suffix reserved for functions that create data tables for
data-driven tests. Presumably this function was accidentally caught in
a search and replace at some point before the tests were imported into
the Qt repository in 2006.
Change-Id: I451c0400a1580233ee90b75dd5ad489ee3d3788e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed data relied on the test's own source file having no write
permissions, but that is not a valid assumption -- in a source package
the file wouldn't have had write permissions, in Perforce it would have
depended on whether the file had been checked-out for editing and in git
the file would always have write permission.
Change-Id: I3b6100429120137095a210189961c8b97f06e50a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed data relied on the test's own source file having no write
permissions, but that is not a valid assumption -- in a source package
the file wouldn't have had write permissions, in Perforce it would have
depended on whether the file had been checked-out for editing and in git
the file would always have write permission.
Change-Id: I000596f122f2765f97a09a08074938c90e2e9f95
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed comment was introduced before the tests were imported into
the Qt repository in 2006 and seems to relate to a test failure that no
longer occurs.
Change-Id: I01f372f6a4f48110711f4f2a86e73acfb7134e24
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed comment was introduced before the tests were imported into
the Qt repository in 2006 and seems to relate to code that no longer
exists.
Change-Id: Ic21e46fe0157adf5be9dc62de098517b7b27c310
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit fixes several issues found in the readLineBoundaries() test
function.
First, the test performed some test actions but did not perform any
verification steps to check that the outcome of those actions was
acceptable.
Second, the test didn't need to write the buffered data to a file to
verify line-by-line reading.
Third, the get/unget action was unrelated to the readLineBoundaries()
test and has been moved to a separate test function. That test function
now tests that get/unget works at every position in a buffer, not just
at position 0.
Change-Id: Icad52ed598e94b6e05a194b9ab301d099bfc094c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make sure to use the Qt namespace for qGlobalPostedEventsCount.
Change-Id: I558a0b0fba1e22a2edd96f9499a2bab82046c4a4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
The removed code was commented-out before the tests were imported into
the Qt repository in June 2006. This code is no longer valid as the
warning messages it relates to are not produced by any code in qtbase.
Change-Id: Iac63b27387b51a71c567386ca61faf5fb00c3364
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The availableWithoutDebug() test was trying to force QT_NO_DEBUG to be
defined, but was actually doing the opposite. While I'm not satisfied
with the way this test works (it would be better to test with
QT_NO_DEBUG already defined when Q_FUNC_INFO is included). at least this
test now does what it says it does.
Additionally, the test has been improved by checking that Q_FUNC_INFO
returns a non-empty string, as opposed to just compiling.
Change-Id: I9175e3a7406152b6250b507a61b5062e3cfabeb8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QAtomic*::load() and ::store() instead of the deprecated
cast, assignment, and comparison operators. These will be removed
in the near future.
The tests for these particular operators have not been changed,
though, as the change to remove the operators will also remove
the respective tests.
Change-Id: I2f24d18992af0c6e0f487d707218e4e84f4bdd12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QAbstractEventDispatcher() does no longer install itself into the current
thread. Instead the new methods QThread::setEventDispatcher() and
QCoreApplication::setEventDispatcher() allow to install a custom event
dispatcher into any QThread as long as there is no default event dispatcher
created yet. That is, before the thread has been started with
QThread::start() or, in case of the main thread, before QCoreApplication has
been instantiated.
Change-Id: I7367e13d8d8aebed5a5651260bb69b8818eb1b90
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This change adds QMetaObject::IndexOfMethod as a parameter to
the qt_static_metacall function.
It lets the moc generated code return the index of a signal or slot
given its pointer to member function
This is required to support the new connection syntax
Change-Id: I39198c6699b5aa3599d3d282f7ac79b1e3684d33
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove various disabled and/or non-helpful debugging code.
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure. Diagnostics should also be informative -- simply
printing the value of a variable with no other information about what is
being printed (or why it is being printed) is not informative.
Change-Id: I21a6c2121be86001bb57e80f426507b6e619ee9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already commented out when first added in November
2007 and is nowhere near compiling. If there was anything of value
here, anyone who is able to find it is free to re-add a version that
actually works.
Change-Id: I4a7127a272254224f6a1e65fbd2a01000a4d2be9
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is passing in CI.
Task-number: QTBUG-21402
Change-Id: I356476e458cac1cd434959fdf801011a607c9233
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Instead of creating slots depending on certain defines,
these defines should be checked inside the slots.
Moc may not be aware of all defines (e.g. compiler
specific ones) and thus (not) create slots according
to the condition given.
Change-Id: I50495444b8f468ec131e6a0937e18803a8077758
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
I added unit tests _fast_cbrt() taken from qeasingcurve.cpp
Change-Id: Id3afd26efac92f594d6358dc2e11f94e8c524da2
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Use QVERIFY2 to provide better test diagnostics.
Change-Id: I128004f4ee133ceed4d8f373bbbe4a0eee431ebf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The qtipc autotest needs to live in qtscript due to dependencies
to that module. This commit is the first of two steps to move qtipc.
The second step is a commit in qtscript that adds qtipc there
(with a proper reference to the first commit, i.e. this one).
Change-Id: I233ee459be76fd1938868c05232ce732cfc913a8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
That was strange that QPolygon was know to QMetaType class but QPolygonF
not.
Change-Id: I67bb99644b8b1d0fe1aec730619d8048cb78219b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Each QVariant instance has internal storage which may be
used for well-know basic types. This patch changes the
behavior by delegating type dependent operation to QMetaType
class which knows more types than QVariant itself.
The patch significantly reduce amount of code in QVariant
implementation.
There are few side effects of this patch:
- better performance:
* for Core types when using Gui (QGuiVariant is able to
construct Core types)
* for small custom types (QVariant::Private::Data is used for all
types that has size small enough)
- comparing two QVariants can give different result for small custom
types (binary comparison instead of pointer comparison)
Change-Id: Ic17fa500d6a882110bfba896fd456c8e6c7a63a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaType::Type enum is the main source of type ids. Currently
there are many tasks that can be replaced by a smart macro that
can iterate over all types. The patch introduces series of FOR_EACH_
macros that may be used for code generation.
As the first step the macro was used for Q_DECLARE_BUILTIN_METATYPE
to make sure that no type was forgotten.
Second step was to use created macros in autotest to improve tests
coverage.
Change-Id: I34e9ad7bacf02b44b028bc1aad20b1241aacebd3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QTRY_COMPARE is now part of qtestlib, so there's no need for copies of
it.
Change-Id: Ied4e7d3b30c1cf16ddcbf8655e4d976e74c2bd8a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Currently, qInstallMsgHandler() does not return the
handle to the default message handler. This patch defines
a default message handler. This is returned by
qInstallMsgHandler() when called for the first time. A call
to qInstallMsgHandler(0) will restore the default message
handler as was the case previously.
Change-Id: I42f06654d45fb0e633f3c6d912fc8f05c23249aa
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apply the same solution to QFileInfo (no public detach(), but a
non-inline d_func instead).
Change-Id: I31c4c759f44a0649b97f7884b078b174c9c00f22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change moves utf8/ into corelib, thus
allowing corelib.pro to be deleted.
Change-Id: Ib1b4e0930ac0e116d9bbc242a6dfb63ae5785d19
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This commit moves the qmetaobjectbuilder test from test/auto/
into corelib/kernel/ since that matches the location in the Qt source.
Change-Id: I0342e8185ce775b0ef71849f365bf54c8fb56da4
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qvariant test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Ibf0dc3caf50d34084fa50cf76d199e77a42f6e16
Reviewed-by: Olivier Goffart <ogoffart@kde.org>
Only properly implemented on unix (XDG), falls back to Document location
on Mac and Windows, because not easily available with the current API
being used by either one.
Change-Id: Id269f0e3c4e3a68e19205de96c0b39980fde80ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
and isRunning() should return false.
This restore the Qt 4.7 behaviour
In Qt 4.7, the finished() was called with the thread's intenal mutex
locked. Which mean that:
- Call to isRunning or isFinished called from a slot connected to
finish within the thread would deadlock. (Hence no compatibility
to keep here)
- Call to isRunning or isFinished from a slot connected with
QueuedConnection in another thread would lock the mutex until
the destructors are finished. and then return as if the thread have
finished.
Change-Id: I963eccae8f7634aff90cc4bbab6ca886a78e35eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The removed test data was for obex URLs, which are not supported by
QUrl.
Change-Id: I166130ae936342d415165e46b7943d198de8986b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Variadic macros are not supported by C++98 standard.
Change-Id: Ib520297e43b654b46925f3ee2735a975ebbe8e35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Soon, QVariant will use more internal storage. It is important
that it still work with not movable types
Also, check with type that are movable but cannot be copyed
without their copy constructor to be called such as QSharedDataPointer
Change-Id: I6d67755476e4822468599bebfa8774ad96a15306
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The removed code was disabled before the tests were imported into the Qt
repository in 2006, so its meaning or usefulness is lost in the mists of
time.
Change-Id: I3108a1a1d86cd135886608f47dcd88bf49f2d3fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was disabled before the tests were imported into the Qt
repository in 2006, so its meaning or usefulness is lost in the mists of
time.
Change-Id: Iccdf5638106b054f02ed73790f7acda1b17b045b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QUnicodeTables::ligature() was removed from the API in 2006. The
commit that disabled the test also changed the code to call
QChar::ligature(), which has never existed.
Change-Id: I056c17c178a527b076538fb007404ff0b735ba02
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This was originaly the only test function in this test, and should have
been deleted when it was replaced by the other test functions.
Change-Id: Idc71a5462fd4d19955f9b14389b877be16c62ab5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The documentation of QIODevice::pos() states: "For sequential devices or
closed devices, where there is no concept of a "current position", 0 is
returned". The test had a disabled check for a position of -1 before
the device is opened. Make the test agree with the documentation.
Change-Id: Ide5729bfc825cdb84caf4851574a57d3ef42ccb2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: I201ba754df26ffc30997bead8b822f97913db2b6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some tests were copied in from KDE's KURL sometime prior to Qt's tests
being added to the Qt repository in June 2006. This was presumably
done with the intention of making the tests work for QUrl, but that
never happened and the copied tests have never been enabled.
This commit removes the copied material.
Change-Id: Ic35526f0018900bd60d7905646b24c62317b5e47
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code refers to WhileIteration, which does not exist.
Change-Id: I4c44bc319ac776d16ce9ba7b5c2938ce1642a3f6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was left over from an unfinished MSVC6 compatibility
API (see commit e3e28e7a in the grafted history). That compiler is
no longer supported, so this code can be retired.
Change-Id: I81bcfa771ae13579f2458eb2d3ebf41c6af8577c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
tst_LargeFile currently seems to pass in a stable way in CI
It does have an issue on 64-bit Linux (see QTBUG-21175), so
that test function is still disabled (QEXPECT_FAIL'ed) on that platform.
Change-Id: I818046f84f2db5eb2155ae1f51f69581029bfaee
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
* QDataStream format documented
* Added Unit test for QDataStream operators
* Updated Unit test
Change-Id: Idbcfcb0b927e6369e8d31b57693c7aa0d1a154e7
Reviewed-by: Olivier Goffart <ogoffart@kde.org>
Qt5 doesn't support MSVC versions before 2008, so workarounds for
earlier versions are no longer required.
Change-Id: I429feff99fe61d286637b960d92fd58962f8aefa
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If qputenv fails, the test should fail rather than skip, particularly as
the test is supposed to be testing qputenv.
Change-Id: Iabe13d360cabaeffda46fab19f1dd0d4ed8e1eee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There were only two ways the QSKIP could be called: (1) the C++ runtime
is broken, or (2) the earlier call to resize the string failed.
In both cases there should be a hard test failure. In the former case, a
broken C++ runtime calls all of the test results into question. In the
latter case, the QByteArray::resize() method has suffered a regression.
Change-Id: I5adf942d2eb4d746d2ab31e98571c5d9bdd40890
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The bug referenced in the QSKIP has been marked as resolved, so this
QSKIP should no longer be needed.
Change-Id: I41dd964827a3df8fb5ebb9674cef9db59c03d432
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
With this change, the file template is always processed in original
QString format. Trying to generate native paths before adding a missing
placeholder mask could change the meaning of templates, such as "." and
"..", which are now tested to mean "..XXXXXX" and "...XXXXXX",
respectively.
After ensuring the template includes a placeholder mask, the path is
converted to a native *absolute* file path and the mask is sought for
again. On Windows, native paths were already absolute. On Symbian, we'd
need at least a clean path, as "." and ",," are not natively understood.
There is a requirement that the placeholder mask /XXXXXX+/ makes it
through this conversion unaltered, which relaxes prior requirements on
*nix platforms. On Windows and Symbian the conversion is under Qt's
control and not user-configurable.
Reviewed-by: Shane Kearns
(cherry picked from commit 401722ef9e6fe79bd41f9d5f79668f5c4997c8e6)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Iac823881c865adf0931dc4f429c6c1ef135eeb56
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Besides generating a unique name, createFileFromTemplate now also
acquires a file handle on all platforms. The file engine's native handle
is passed by reference and modified in place.
This fixes a long standing security issue on Windows.
On Windows and Symbian platforms we directly use the "native" file path
when processing the template and generating the unique name. Since the
native encoding is known, conversions at this point are safe.
Errors other than "file exists" are propagated to Q(Temporary)File,
and result in a failure in open(). The changes also unify error handling
and should give consistent behaviour across all platforms.
Worthy of note, there's a change in behaviour on Windows and Symbian:
fileNames returned by QTemporaryFile on Windows and Symbian are always
absolute after open has been called. This has to do with how
QFileSystemEntry::nativeFilePath works on these platforms. (Test was
updated to reflect change in behaviour.)
Reviewed-by: Gareth Stockwell
Reviewed-by: Shane Kearns
(cherry picked from commit ff9b69838ec146aeb43d4af8a03043f9c5f0454d)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Ibc9affb321ea4f4b193efc1f7336c9770b43d8df
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Removed the bogusFds test, as it is only run on symbian in 4.8
Forward ported the posixSockets fix from 4.8
Task-number: QTBUG-20892
Change-Id: I8a8c67e12eae402724bbb07fe37e7ea1770aaeee
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Add a ok return value for whether found or not.
Task-number: QTBUG-21672
Reviewed-by: Olivier Goffart
Change-Id: Ic0ea7455dccf1ac91705bcc1479444eb4091ded3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Example of message of failed assert (gcc 4.6, file tst_qglobal.cpp:300):
tst_qglobal.cpp:300:92: error: invalid application of ‘sizeof’
to incomplete type ‘QStaticAssertFailure<false>’
Change-Id: Ic1798094f718eaad388d754034115aafbbb6bd5e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
By making it possible to specify the place in memory where a
type should be constructed, any meta-type can be allocated on
the stack, for example. In the QML/JS QObject binding, this
makes it possible to call slots and access properties from
JavaScript without having to perform any mallocs (e.g. due to
QVariant creation) in the C++ <--> JS value conversion, in
the best case.
In addition to QMetaType::construct() and QMetaType::destruct(),
this change introduces QMetaType::typeSize(), which returns the
size of a type in bytes. This can be used to prepare a suitable
buffer for constructing a type using construct().
Benchmarks indicate that in-place construction is 2-5x faster
than normal construction for core and GUI types on linux-g++.
Note that there is already a QMetaType::construct() function
in Qt 4, which has been renamed to QMetaType::create() in Qt 5.
In order to avoid existing usages of construct() in user code
to call the Qt 5 construct() (when they really meant to call
create()), the third argument ("copy") of construct() is made
mandatory. Hence, calls to QMetaType::construct() written for
Qt 4 will cause a compile error when compiled with Qt 5, and
the user must adapt his code.
Task-number: QTBUG-12574
Change-Id: I836f06f6ee1c1c3edbd199a03424c78c942bdd3e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no way for a .pro file to know if QProcess is in the Qt build,
so the QProcess autotest cannot be omitted from the build if QProcess is
not available. Because of this limitation, the test was using
QTEST_NOOP_MAIN when QProcess was not available, making the test appear
to pass. This commit changes QTEST_NOOP_MAIN to QSKIP, so that the user
receives a clear indication that the test isn't testing anything when
QProcess is not available.
Change-Id: I79f667b17ff98dfc47eb61fb977365abef8883fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that these tests aren't testing anything when the required
defines are not defined.
Change-Id: I8508f50c6264fafa836090c5d6ffa6ce02dda102
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
