QAction::setData() always emits changed() even without actual data change.
Original code lacks a guard to check if the data changes.
According to http://doc.qt.io/qt-4.8/signalsandslots.html,
adding guard also benefits to prevent infinite looping in case
of cyclic connections.
Task-number: QTBUG-62006
Change-Id: I776369b668082f9f02e4502a36b1ae234ee7e079
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We have found that there are three important operations
when it comes to menu creation and putting it up in the
native menubar:
* Adding the action to its parent menu
* Setting the submenu as the action's menu
* Populating the actual submenu
This application tests all possible permutations for these
three operations, starting from the menubar and down two
more menu levels.
Two command-line options allow, first, to create a late
menubar that will replace the original menubar from the main
window form (--new-menubar) with, second, the option of
creating it parentless (--no-parent) before setting it as
the new main window menubar.
While mostly interesting for platforms supporting QPA menus
and menubars, this could be useful as a trivial check for
QMenu and QMenuBar in a pure QWidget environment.
As of today, the application shows at least three issues on
macOS which will be fixed in upcoming patches.
Change-Id: Id3c1e0f346c6fe27ab4656ff045b88a0a8623740
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Mouse position is converted from native pixels later, so we must
provide native pixels for "QWindowSystemInterface::handleEnterEvent".
Amends 7091be1b79
Task-number: QTBUG-63865
Change-Id: I813c171f2fc1d321af702ac30eb5f2e4232e97c4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not properly initializing all members of the extended parameter struct
will cause an "invalid handle specified" exception on use.
Task-number: QTBUG-63883
Change-Id: Ic3a58df864c9e29ccbadc04bd71c18c8ef34374c
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Both QNSMenu and QSystemTrayIconQMenu aren't referenced anywhere
else, including within qcocoasystemtrayicon.mm, since the QPA
backend was added.
Change-Id: I632c1b230226b2d08afce7f0f0019e9f7c030ba5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A QVariant can only be converted to a QByteArray if it has user type
QMetaType::QByteArray or QMetaType::QString. The way it stood, we
always tried to convert the mime data to a QByteArray, and
then put the result into a QVariant. This would fail if the mime
data contained e.g a QPixmap.
This patch will inspect what kind of data the QMimeData contains, and
convert it to a QVariant using the expected API.
Backport of 6d3c483
Task-number: QTBUG-57428
Task-number: QTBUG-63660
Change-Id: I09b4a94aef7b52773e1a79c468ead71b36dfbfc5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The path wouldn't match if the cookie's path was root ('/') and the
URLs path was empty.
Change-Id: I6dcd10f1fdf4f48f14e50f1b169cbdfda7005849
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Recent drivers no longer contain wintab32.dll, point out a version
that still has it.
Change-Id: I4125a0af3c11ab739f8006b91f58899aeed54458
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In some cases when a session isn't needed (i.e. for localhost), the
session is not opened at all. If a program (e.g. our tests) redirects
from localhost to a different system (e.g. the qt network test
servers, or the internet) it will wait for a session forever. So, we
need to check if a session is needed for the redirect-target and then
open one. It is usually opened in
QNetworkReplyHttpImplPrivate::_q_startOperation
Change-Id: Id3b78182a3fb3f63f0235ecb1fb665df8bd0c4ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 542e11ab2b)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 1af927976a)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We already cleared 'cookedHeaders', which is a QHash for 'known headers'
(enumerators as keys instead of strings), now do the same for 'rawHeaders'-
not to end up with some weird mix of headers from all possible redirect
responses and the final response.
Task-number: QTBUG-61300
Change-Id: Ifd6655c4167840bb00d29446d36ce65ba2d5491a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There's a common misconception that qDebug and friends are not
thread-safe, so let's explicitly state this.
Change-Id: I48d4ab8983017a9f2e7c9932a49ed573baa22929
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I am not sure if this is going to help, but it is required that the
bridge checks that the interfaces it accesses are valid, since that
protects from accessing them when they are in the destructor.
This should be done, whether it fixes the issue or not.
Task-number: QTBUG-45855
Change-Id: I2b96999ca4043f8b33607c864d1d178695d03192
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
A few tests would QSKIP depending on the inclusion of SSL, producing
multiple lines of noise in the output.
And one test used https in one of its configurations without checking to
see if it could, causing an UnknownProtocolError.
Change-Id: I5f54bf1005f962cc027c099b816fbe245dc43d3f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the check for totalPacks below; it prevents leave notifications
from being handled.
Task-number: QTBUG-53628
Change-Id: I2436c51308803337e6d48ef958e03123283d4a1d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
On macOS, absence of a QPA menu means that we should be using our
own internal logic since there's no entity on the QCocoaMenuDelegate
to take care of the shortcuts.
Change-Id: I35ed8f0b55445f61d0528709d4debb636a502002
Task-number: QTBUG-61039
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need it
1. to be sure, that thread is already attached to jvm
when we attach debugger to the process
2. to have a human-friendly name for main native thread
Change-Id: I1e572a0f09ec8af24a910835aaa6d302f6f2cb43
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
It must detach, otherwise it overwrites all QHostAddresses that were
sharing a given QHostAddressPrivate. This overload was introduced in
5.8 and probably as a result broke some pre-existing code, that previously
was using a conversion and the correctly working setAddress.
Conveniently, QHostAddress::clear() does: d.detach(); d->clear();,
exactly the first thing we do in other overloads of setAddress.
Task-number: QTBUG-63764
Change-Id: I63c36e877c9358d3ff26ba1f2e4adf35b771f426
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This code asks the platform theme to resolve SpellCheckUnderline to an
actual pen style (wave, solid, dash, etc.) but if there's no theme,
or if the default implementation in QPlatformTheme is used, the value is
still SpellCheckUnderline, which then casted to a PenStyle below in
qpainter.cpp:
pen.setStyle((Qt::PenStyle)(underlineStyle));
The value 7 is an invalid PenStyle, which leads to random behavior
when drawing the underline. Make it WaveUnderline if the platform theme
had no opinion on how to draw it.
Change-Id: I4f02f9b58f10582cee5aefce7a4d5cd300133140
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
They are needed for older compilers that doesn't support
the __fp16 extension. Reverts under the assumptions other
compilers will optimize it away.
This reverts commit 6dc7e468df.
Task-number: QTBUG-63693
Change-Id: If780de001d8c12df0db12caaf62505f16e01b663
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On high DPI (e.g Apple Retina) user resizes of
QDockWidgets (with custom titlebars) could fail.
There was a cursor position check in mouse
move event bailing out if the cursor pos was not within
the widget.
The problem was that we could be on the edge
(or maybe even cross it?). Furthermore there is (/was)
no similar check when setting the cursor
to be a resize cursor, so users will obviously expect
the resize to occur.
This solves a part of QTBUG-63526
[ChangeLog][QtWidgets][QDockWidget] Fixed an issue
in QDockWidgets where the widget would not resize
despite showing a resize cursor.
Task-number: QTBUG-63526
Change-Id: Ifa842a109071552506da3a82822d903dc252c8cd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Commit ba1b73175b tried
blacklisting this autotest in Windows 7 only. This however
does not work. We can't pin point blacklisting to a specific
Windows version.
Task-number: QTBUG-63122
Change-Id: I5edb5b56fd86ad194214818a838db9cfd6be2ad1
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest has been blacklisted already in RHEL 7.1
and RHEL 7.2. This one extends it to 7.3 and 7.4.
Task-number: QTBUG-52523
Change-Id: I3e2d8cd882d9f7dc58a65bde88e3aa16438b13c3
Reviewed-by: Simo Fält <simo.falt@qt.io>
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Partially revert a72513cab7.
The value is too small for Chinese fonts.
Task-number: QTBUG-63654
Change-Id: If020bfc3044258b7abfd9d463bc9b292a9cc0839
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
Documentation is missing the specialized event type names in the
non-client mouse event enum description.
Task-number: QTBUG-55018
Change-Id: Ica35994e13fc9a637a52eeca361898f8669fdbd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
If the datagram reception failed, we forgot to set the buffer back to
empty. The returned QNetworkDatagram did report isValid() == false, but
it was possible to get the .data() and check its size, getting nonsense.
Tests in the next commit.
Change-Id: I638cf58bfa7b4e5fb386fffd14ea91adf2133d47
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends c1cece8e54
For some reason, this was missed in the original change. This is now
outright prohibited in the watchOS 4 SDK and will cause a compilation
error on that platform.
Change-Id: Iaa2edf6256a54ca11dec9f1efd8a4d18ba7dc046
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
