The return order of the keys is random, so let's sort both first, then
we can compare the lists. Should get rid of the test flakiness.
Change-Id: I2e89d3cc603da6a4667b3677350baa4d40d59b45
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This class allows to node definitions from a JSON representation. This
will come in handy to ship preset prototypes for use with
QShaderGraphLoader.
Change-Id: I3f3b5d7852e17d484069b4814ee6e5910997c613
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This class allows to load a shader graph from its JSON representation.
To avoid duplicating the shader snippets inside of the JSON which would
be a maintenance nightmare, we instead allow to register a set of node
prototypes by their name and only refer to said names inside the JSON.
Change-Id: I3e7b39e8b3c25f51f331a0a59dda883ac8e2bc57
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This class is meant to generate code from shader graphs
Change-Id: I1cf22352387f3f9f55e7589aa77a296689836911
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is our "byte code" representing a flattened graph. It will be used
as input for the code generation.
Change-Id: Ie02a60d07c035f3d16872e79931eb7cde168a8d1
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This allows to connect our nodes together via ports. This way user code
can assemble a shader from simpler blocks.
Change-Id: I168dcf4af6aa11ad47b68d91e5a55e96ca922678
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Nodes will allow to describe inputs, outputs or value transformations in
a shader graph.
Change-Id: I44f806d9595fd0e68fc9026cda2b4fa0a62af283
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The ports will be used to connect nodes from our shader graphs.
Change-Id: I9d4fbb1f7bd8320c4373ebb166a4fe13bd1482c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is the first building block toward a node based generator for
shader programs.
QShaderFormat will be used by the other classes to qualify in which
format the code snippets and includes used are.
Change-Id: I11aefc6bb359832a853ed1b6bec302dc3516cfc4
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
GCC didn't support it until version 5 or 6, so add configure tests for
both <random> and <sys/auxv.h>. Normally I'd say "upgrade", but this is
too low-level and important a feature.
There's a good chance that all our supported compilers have <random>
anyway. As for <sys/auxv.h>, it's present on Glibc, Bionic and MUSL, but
I don't see it in uClibc (AT_RANDOM is a Linux-specific feature).
Change-Id: Ia3e896da908f42939148fffd14c5b2af491f7a77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The serialization of date-times understood time-zones (indicated by a
't' in a format string) but the parsing didn't (so viewed the 't' as a
literal element in the format string, not matched by the actual zone
it needs to parse), although some tests expected it to.
This made round-trip testing fail.
Implemented parsing of time-zones.
Re-enabled the formerly failing tests.
[ChangeLog][QtCore][QDateTime] Added support for parsing of time-zones.
Task-number: QTBUG-22833
Change-Id: Iddba7dca14cf9399587078d4cea19f9b95a65cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The formatting of times in Norwegian has changed to use colon rather
than dot between hours, minutes and seconds:
http://cldr.unicode.org/index/downloads/cldr-30#TOC-Other
tst_QLocale gets a matching revision.
Change-Id: I35a16080def5fbadd62144a0b44be8110b9be29b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was never loading images from a valid path, and thus never
had any fullfill the base option which meant nothing was tested.
Making it work revealed that the Format option on BMP formats doesn't
predict semi-transparent files.
Change-Id: I7035a0f63ebfbce940ce7a17a6142cf177480798
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
[ChangeLog][QtCore][QProcess] Added support for standard channel
redirection using setStandard{Input|Output|Error}File to
QProcess::startDetached.
Task-number: QTBUG-2058
Task-number: QTBUG-37656
Change-Id: Iafb9bd7899f752d0305e3410ad4dcb7ef598dc79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In FileDialogPanel::options(), QFileDialog::DontUseCustomDirectoryIcons
was set when the "Don't use custom directory icons" box wasn't checked.
Change-Id: I6e9d9b41cf91f4abcc98c02bed44675908a8391d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Two more ways line numbers were making it through.
Corrected a doc-string to tell nearer to the truth.
Change-Id: I946aaeb936d47fffe50d7ec15e2524992cc9e428
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Document that the saved output is used by tst_selftests.cpp and use a
crude parse of it to get the list of subdirs that it actually tests.
Change-Id: I73023228c9e547f965b7749dd66de7ef09c3815e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It may crash on (probably a bit broken)
qtbase/src/printsupport/dialogs/qpagesetupwidget.ui
Change-Id: Ibca95a3d8aa4899adbc952aee7b46621ac888c6a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The motivation for this change is to make it simple to pass a
correctly sorted environment block to Win32 CreateProcess(). It is
also nice in other contexts that the environment variables are
sorted. The change is made for all platforms. This keeps it simple and
the only ill effect is slightly slower lookups.
Concerning the environment block passed to Win32 CreateProcess:
The environment block that is passed to CreateProcess() must be sorted
case-insensitively and without regard to locale. See
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682009(v=vs.85).aspx
The need for sorting the environment block is also mentioned in the
CreateProcess() documentation, but with less details:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425(v=vs.85).aspx
Task-number: QTBUG-61315
Change-Id: Ie1edd443301de79cf5f699d45beab01b7c0f9de3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When punctuation is ignored then the kUCCollatePunctionSignificantMask
should not be set. This was originally thought to not be working due to
a bug on the Apple platforms, but this is not the case.
[ChangeLog][Platform Specific Changes][macOS][iOS] QCollator now
respects the ignorePunctuation property on Apple based platforms
correctly.
Task-number: QTBUG-41978
Change-Id: I62044076387d6e4479f4aaef3c2f48f49dbd160e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Put all widgets in one dialog so that show/setActive occurs only once.
- Use the center of the widget geometry for positioning.
- Remove BypassWindowManagerHint which likely causes qWaitForWindowActive()
to fail.
- Move the cursor out of the way and subsequently send mouse events
to the QWindow
Task-number: QTBUG-51400
Change-Id: I2176d8dbaead72d7a6fa89aa769e4c804eea7a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
First and most importantly, let's not use more than half of the template
for the application's PID. With over 71% of all PIDs on a typical Linux
system and 90% of those on a Darwin system having 5 decimal digits,
using them all in a template that is usually 6 characters long is
wasteful. That leaves only 1 character for the random part, thereby
reducing the number of temporary files possible to only 52. So limit the
PID to half the characters of the template.
Second, let's use QRandomGenerator::bounded to create the the random
part, instead of qrand (which is often unseeded at this point).
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b52eda5e467395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This class provides a reasonably-secure random number generator that
does not need seeding. That is quite unlike qrand(), which requires a
seed and is low-quality (definitely not secure).
This class is also like std::random_device, but better. It provides an
operator() like std::random_device, but unlike that, it also provides a
way to fill a buffer with random data, not just one 32-bit quantity.
It's also stateless.
Finally, it also implements std::seed_seq-like generate(). It obeys the
standard requirement of the range (32-bit) but not that of the algorithm
(if you wanted that, you'd use std::seed_seq itself). Instead,
generate() fills with pure random data.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4e3ba9ea04da8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test fails as sendmsg() on the socket trying to deliver a packet to
the IPv6 link-local fe80 address returns with -ENETDOWN. I cannot figure
out why this happens when RHEL 6.6 is run under qemu/kvm but not under
vmware. More details are in the task, but meanwhile the result of this
test is ignored.
This affects only RHEL 6.6, it passes on RHEL 7.2.
Change-Id: I4ade5cd249dd0d1901368ab571dad324e0fd10c2
Task-number: QTQAINFRA-1042
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When an archer lets go of the bow-string, she looses an arrow; when
the hounds are straining at their leashes and the handler lets go, he
looses the dogs. It's archaic usage now; we'd normally say "lets
loose", "lets go" or "releases". In any case what was meant here was
that something got lost; a widget loses focus or a network loses its
connection.
Change-Id: Ic1fbe9e1f76185bcb7caf034d6be97ebfeb2e270
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Due to popular demand. It does have it benefits (especially when
it comes to convenience) to allow grabbing QOpenGLWidgets even
when they are not part of an actual window and are not actually
visible.
Does not involve much more than dropping the warnings and bailouts
when there is active native window (because the QOpenGLWidget/its
parents are still hidden).
In addition the device pixel ratio from metric() has to be fixed
as well.
[ChangeLog][Qt Widgets] QOpenGLWidget is now able to render and
return its content via grabFramebuffer(), QWidget::grab() or
QWidget::render() even when the widget has not been made visible.
Task-number: QTBUG-47185
Task-number: QTBUG-61280
Change-Id: Icc2b0b3ce9778a3eb6409d54744238568abb0f0d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Makes it easier to pull out data from a document when the structure is
known up front, while still supporting default values if the structure
does not match the expectation, eg:
int age = QJsonDocument::fromJson(ba)["users"][0]["age"].toInt(-1);
Change-Id: Ief0899bbb81610f6f22a56e2ac846121bffe77a0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Saves a lot of manual toArray() and toObject() calls when the
JSON structure is usually known anyways. Read only access for now.
Change-Id: I5fd787144198e0443e4da285a11ce2597b66f99f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTimeZone("UTC") should be valid, as "UTC" appears in the list of
availableTimeZoneIds(), and tst_QTimeZone::dataStreamTest() constructs
timezones like this, which are considered valid.
The internal representation of a QTimeZone("UTC") as created by
QTimeZone::QTimeZone(const QByteArray &ianaId) is a QUtcTimeZonePrivate
which isValid(), so the containing QTimeZone isValid() too.
When QTimeZone is serialized into a QDataStream, it calls
tz.d->serialize(ds) which is QUtcTimeZonePrivate::serialize. This
writes QStringLiteral("OffsetFromUtc") followed by the IANA ID and
the offset (etc.) to the datastream.
When QTimeZone is deserialized it looks for this marker string, and if
present, it passed all of the parameters to the QTimeZone constructor
(not just the name). However, that constructor does not support standard
IANA timezones (only custom ones), and when it detects that the supplied
IANA ID is actually listed in availableTimeZoneIds(), it leaves the
pointer to the QTimeZonePrivate uninitialized (NULL), which leaves
the QTimeZone invalid (isValid() returns false).
Thus, a valid timezone which was serialized and then deserialized has
become invalid. This also affects serialization of QDateTimes with
timezones.
Fixed by calling the name-only constructor first, which works (only) for
IANA standard timezones and leaves the QTimeZone invalid (isValid()
returns false) otherwise. In which case, we can call the many-argument
contructor to create a custom timezone with the same offset as the one
which was originally serialized.
[ChangeLog][QtCore][QTimeZone] Fixed sending IANA standard UTC-offset
QTimeZones through QDataStream, which previously came out invalid after
deserialization.
Task-number: QTBUG-60595
Change-Id: Id9c47e8bda701faae4d800e012afb6db545b2fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is possible that tmpdir already exists as a leftover from previous
tests. That is no reason for the test to fail.
Change-Id: I010633fb92defb064093af9872ae6fd2178f07dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
load(resources) makes embedding the test data into the executable
fail for platforms that use builtin test data. As the load call
is only used to obtain QMAKE_RCC we can avoid that call by
assuming that rcc was not renamed and assembling the path ourself.
Change-Id: I25b982d10f5617d9a213803e7e4bcc85fc66b2e7
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
As QAbstractSocket::readData does and as the documentation of QIODevice says
"this function returns -1 in those cases (that is, reading on a closed
socket..."
Change-Id: I1e64673f6a6d792a640bd6cb28b2bb5a0f18dc36
Reviewed-by: Aleix Pol
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
By avoiding unneeded nested QPainters.
Crash was:
ASSERT: "s" in file /data/sources/qt/qt5/qtbase/src/gui/painting/qpaintengine_raster.cpp, line 2239
s was nullptr because the inner QPainter had called updateState(0), which is then dereferenced by the outer QPainter.
Task-number: QTBUG-61036
Change-Id: I7aad648f805f1abac4d38dfbefa2292da8b52af4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Normaly, in C++ It's not valid to define a keyword, but it turns out that some
system header do, so we just silently accept it.
[ChangeLog][moc] moc no longer errors out if a C++ keyword is #define'ed
Task-number: QTBUG-61204
Change-Id: Ia4d3ff9c77b6ff261b6140c220cfb81bd13f1d6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were two more places that blacklisted certain interface types that
commit e579c822c5 didn't catch. This
commit adds those two.
Task-number: QTBUG-61263
Change-Id: Ia58d0480a9169f0f121aec03bf2e8900a58939cd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
