When run as root was able to move file to /etc directory but was
expecting a failure.
Change-Id: Ic2ac5506253f2a3395ed56e88a856542bf82ad6d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
There is now public API to re-allow forward declared types
as metatypes.
Change-Id: I6c956ea2dc96f66eccfcfa81fcbb833b58b58d61
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Correct a bug in the test and use unique names for data rows. The bug
was that the test assumed that QCOMPARE for float values 100001 and
100002 would fail, but it actually succeeds. QCOMPARE for floats uses
qFuzzyCompare(), which succeeds if the numbers differ by no more than
1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes,
while QCOMPARE(99998, 99999) fails.
Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of the subtests are only run with plain-text output format. For
those subtests, the other output formats were unused and gradually
becoming out-of-date.
Change-Id: I4c10f7f5bab2d2cc7d2d2ad641fbf5d4df02b798
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Our OSX 10.7 test machines send a SIGILL rather than a SIGSEGV to a
process which attempts to dereference a null pointer.
Change the "crashes" test to dereference an invalid pointer with a
value slightly greater than 0 so that we get the same crash behavior on
all (unix) platforms.
Change-Id: I700a2c7d654a9468af5e5996010a258695ed2ae5
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
We have logic to prevent animations from starting in the middle of
an animation as a result of a previously slow frame. This was
based on current time, not the animation driver time and would
cause severe jumping when custom animation drivers were being used.
Also, this logic would trigger multiple animation runs per frame,
which is very bad for performance, so this change introduces a
threshold of 50ms to compensate for that. 50ms because that is
triplebuffer limit.
Change-Id: I1c7ebac30060e849d03c14d62411c2b953854d98
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I9069b61c6247bdff323e2e5e93b70e42c3504201
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Use QApplicationPrivate::getHWNDForWidget for getting
the HWND for Widgets. The Menubar needs refactoring,
but the API for native Menubars is not in place yet,
so fix it temporarily.
Change-Id: I090cca99d19aa881c2f41b54005a65f3ae67ae68
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Adds check for Q_OS_QNX to force
QFileSystemEntry QFileSystemEngine::canonicalName() use realpath(X, 0) on QNX
as well.
Change-Id: Id0a32277e6d043753c42101c91a393ebedb48a0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bug was caused by attempting to stroke an empty subpath. If there
have been no line-to's emitted we should not try to join the start and
end of that line segment.
Task-number: QTBUG-23248
Change-Id: I38b7e955ed6683f8fc25f9551e93b4f472c022bf
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
(cherry picked from commit 593947ba70188df3d33efe031fab2fd255faa8b9)
Use the Qt Version because platforms
like Windows CE don't support getenv.
Change-Id: I95ca4d7194e09889ab228af80e679a3c34479e41
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Previously, if any fields in the supplied record could not be matched
with a column in the target table, dataChanged() was supressed for all
columns for OnManualSubmit. This is not good because it prevents other
views from noticing the fields that *do* change.
It's simplest and probably more efficient just to emit
dataChanged() once for the whole row. Fewer signals need to be
processed and in typical cases much or all of the row is likely to
be changed anyway.
Change-Id: Ib56bf9a18e51b9cb85771acefcb2bf26e295a54e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In an apparent attempt to be economical with emitting dataChanged()
and submitting SQL to the databse, setRecord() compares each field
value of the record with the old value, taking action only when
a difference is detected. Several complaints against this code are:
-The comparision does not work on float type.
-It is really up to the application and database to decide this. The
model should make few assumptions. The application has the option to
omit fields from the record that should be ignored.
-The current behavior seems to assume that the "old" values are the
current state of the database, but the database may have changed since
the model was last refreshed.
-The code compares the value from record(), which probably
corresponds to the EditRole, with the DisplayRole value from data().
Change-Id: I11477c185eb411d442144dc682893d0df12d03d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use submit() instead of calling updatRowInTable(). The effect is
exactly the same. Submit() invokes submitAll() which invokes
updateRowInTable(). The cache is purged and select() is called only
on success.
Change-Id: I3de9a3d6acf802ee6594d034a9e261e53637995d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Emit dataChanged() before a possible new select instead of after.
The select reinserts all the rows, emitting signals for that, so
there isn't any point to dataChanged() afterwards.
Change-Id: I698a0d385f97104891343d94cc27e4ecf3a7233c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Affects setData() and setRecord().
Previously dataChanged() was suppressed when editing an inserted
record, except for OnManualSubmit. The motivation was probably to
allow setData() to be used while handling primeInsert().
Suppressing dataChanged() is not a good idea since views other than
the one which made the change will not know of the change.
It is a terrible idea to call setData() or setRecord() while
handling primeInsert(), so this is now expressly forbidden.
setData() and setRecord() now do nothing and return false if called
while rows are being inserted.
Change-Id: I96738c09a6268704c5626d95b72bfb46378e3242
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
submitAll() is supposed to be for OnManualSubmit.
Change-Id: Id0335fe731669bd24e1da72ab4724f88d6f1d905
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the compiler doesn't have static_assert yet, so we ran into the path
which was not fixed by 10229ae.
use !!() pattern instead of bool() cast, as the latter throws off macx
(see 95d7abb). the other alternative - a c-style cast - would cause
autotest failures (see 92464fa), and would be ugly anyway.
Change-Id: Idbe9a3b60e17ae1f566f938d9b9be04f0c977492
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
When text has been selected in a QTextEdit and the left or right arrow
key is pressed, the cursor moves one character beyond the start or end
of the selection, when it shouldn't move past the selection. Fixed by
moving the cursor to the right place when a selection is active.
Task-number: QTBUG-22853
Change-Id: I9ea1863436db98627a6fd041ce554cf10be26493
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
(cherry picked from commit 1b031759ddfdab9703dfecac13f1ed318da3dafe)
Use the new Q_PROCESSOR_* macros to decide which headers to include in
the atomic implementation. This also removes qatomic_arm.h, which isn't
needed anymore, just select the correct qatomic_armv*.h from
qbasicatomic.h
Change-Id: I954848feafb8c420949d066ffcee1dd2b271e13b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This detects the target processor based on preprocessor #defines,
setting Q_PROCESSOR_${FAMILY} accordingly. Optional
Q_PROCESSOR_${FAMILY}_${REVISION/VARIANT} #defines are also provided,
usually dependent on how the compiler is invoked.
Currently detected families (and variants) include:
ARM (v5, v6, and v7)
X86 (i386 and x86_64, as X86_32 and X86_64 respectively)
IA-64
MIPS (I, II, III, IV, 32, 64)
Other families that currently are not detected, but Qt has (or had)
support for include:
Alpha
AVR32
Blackfin
PA-RISC
PowerPC (optional 64-bit variant)
S390 (and S390X 64-bit variant)
SH (and SH-4A)
SPARC (SPARC V9)
Detection for these is currently commented out, and can
be easily enabled later.
Change-Id: I571f245c189b9d80c7c3a5369ac595a271f37c8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are no Pipes under Windows CE,
so take out the pipereader.
Change-Id: I3e6afd403ed36e86a8694674f6c4798f1226ff74
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
A messagebox will be shown for an assertion in
debug mode. This introduces a need for user
interaction to proceed the execution of the
unit test. Setting the Report mode to debug,
will only print the assertion to stderr.
Change-Id: If8ae80ea96d6608cba77b9c6ca176f97d1680932
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
QMetaObject::invokeMethod attempts to deference the extradata for
meta objects versions 6 and greater which is causing a crash in some
of the qtquick1 tests.
Change-Id: If5b2ca83b15de2cd558976c6b681dd5457c404d1
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The comment was wrongly placed. It describes v_cast function.
Change-Id: I2390e4bf1fc19136bbbecbae4be83d5320ca244f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I0fbd713fcdf094f9d13acee855b6dd6986695e0d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
qguifunctions_wince.h does not live anymore in
QtCore, but instead in QtGui, so do not include
them in QtCore.
Change-Id: I22222ae7045ee0140924197ac583a3bf2e0f3d36
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Correct the implementation of cutText and copyText in QAccessibleTextEdit so
they use cut() and copy() methods of QTextEdit
Cherry picked from Qt 4 - 36202cf8fca822492615d418bd563a40bee4af08
Change-Id: I86a531ed7059b1a928cb8515c2743d4d8b596b36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This change is needed because msvc2010 tools have a '\' character at
the end of environment variable VCINSTALLDIR. This variable on msvc2008
does not have this '\' character at its end. Without this change
QMAKE_TARGET.arch on msvc2010 x64 evaluates to x86 instead of x86_64.
Task-number: QTBUG-22686
Change-Id: Ifba833e9361c97568b8b3de9976023e8537b208a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This makes these files easily locatable when using Qt Creator.
Change-Id: Ie0c15ebf2cc7045954713265bf524f2ecf1eea34
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
This allows the QML programmer to set 'acceptedButtons', for a
MouseArea, to accept all buttons with a single value. In
comparison with OR'ing a long list of Qt::MouseButton values,
this is shorter, easier, more clear, and less error-prone.
Task-number: QTBUG-24106
Change-Id: I0259969223c0b44b6ce8ae84aed37d20cb77999b
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
Reviewed-by: Martin Jones <martin.jones@nokia.com>
- Windows configure: make -mp affect the Qt build itself
- Change syncqt default parameters for shadow building
- Moving tiff image format support and libtiff out of qtbase
- Add concurrent to QT_CONFIG also on Windows
- QRegularExpression: configure support for PCRE
- Remove support for the MNG file format and the bundled libmng
Change-Id: I14232ed4bb6bd90bd1d77d657d426108b4a88f47
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix compilation with MinGW-w64 with the following changes:
- Include intrin.h to fix __cpuid not declared error
- Include intrin.h before *mmintrin.h headers to avoid extern linkable
mismatch
- Use quintptr instead of unsigned long to handle LLP64
- Do not declare winuser.h structs already provided with MinGW-w64
- Work around IID_IShellItem being declared but not defined with
MinGW-w64
- Remove incorrect use of SUCCEEDED macro on pointer
Change-Id: Ia21f8e3a1d225cf501e646eacd968bfc744ce0a2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Change-Id: If844785d7d3645c33e0fcb1206cc52f8ab644070
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Previously, ignored messages were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data row in a data-driven test function didn't cause all of the expected
messages to be generated, the remaining messages would be carried over
to the next data row. This would result in errors about missing
messages being associated with the last data row rather than with the
correct data row.
This commit makes testlib check for missing ignored messages after
running each data row rather than only doing so after the last data
row.
This commit also adds a regression test to demonstrate that ignored
messages can no longer be carried over from one data row to another.
Change-Id: Ibee51aa6e96866fbcbcb4acee1a8340a86a6a4ba
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, expected failures were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data-driven test function called QEXPECT_FAIL and then didn't perform
any further verification steps to trigger the expected failure, the
expected failure would be carried over to the next data row, probably
causing the first verification step in the test function to XPASS (with
a seemingly irrelevant error message) for the next data row.
This commit adds the new function QTestResult::finishedCurrentTestData()
to cleanup after each data row is executed. This function treats calls
to QEXPECT_FAIL without subsequent verification steps as a test failure.
This commit also adds a regression test to demonstrate that expected
failures can no longer be carried over from one data row to another. If
run against the previous version of testlib, the new test would report a
pass instead of an error.
Change-Id: Ida5c7f080815b0dca9531131fed582b0918334cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
linuxinput becomes evdevmouse. The experimental touch code is removed,
now the plugin's purpose is solely to generate mouse events from
absolute and relative pointer events. The plugin key is EvdevMouse.
touchscreen becomes evdevtouch. The plugin key is EvdevTouch.
In case keyboard support appears some day, it will fit nicely in the
system by the name of evdevkeyboard or similar.
Some little udev code is moved to platformsupport so it can be shared
between the plugins. This may be extended later if more sophisticated
udev support is needed. N.B. the intention is to keep this as simple
as possible. We are shipping these plug-ins as reference examples, not
as full-featured drivers.
evdev and udev support has configure time tests from now on. This
means the "drivers" (generic plugins) will get built automatically
when the support is available.
Change-Id: Iaf6260b5c2edfb9f25d070d2764466725adc6b4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QWidget::isActiveWindow() was being checked in QAccessibleWidget::state
to determine if a widget is focusable. As a result, focusable widgets
were reported to be not focusable when the window was not active.
Change-Id: I73c47181ed132a84f0251cb67d0e20912e29a1a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
