for one, the syncqt invocation is qt module magic and thus simply does
not belong into the generic default_pre file.
second, this way the forwarding header generation is now linked to the
rest of the build magic for a particular module, which is way less
confusing for the unsuspecting developer.
Change-Id: Idc8e420d3faf173d7fff4a41e6e1c59af15c3023
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
all other build artifacts go into qtbase's build directory anyway. this
asymmetry was confusing and causes cmake users some grief.
Change-Id: I4d7f7b2318f6c5300eb00360664785cb2c8217b7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, this dead code can be removed.
Change-Id: I5e9c7dd3fb271346d1b5f0e2930874da3e4d2d57
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
now that all modules have migrated, dispose of the clutter.
Change-Id: Ib8937c1452536f645b76c0097b927df1108afc1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way qmake is made aware of the forwarding pris which are generated
for this module even when a top-level .qmake.cache prevents the module's
root from being found automatically.
the path is also added to the cache, so that subsequent partial
qmake-ing of the tree will still find the module.
this also makes the -cache-module-fwd parameter of syncqt useless, so
remove it.
Change-Id: I2afbc52a465c0b3260e9bcaf032c43a82ae8061f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed by webkit's creative directory layout.
Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.
this variable is used by webkit, which has a somewhat creative directory
layout.
Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qtbase install dir being a build dir is a necessary and sufficient
condition for detecting a developer build.
Change-Id: I3d98c789ac6fbe570980459edabb9a941bf1e5d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.
Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Normally you want to pass -installdir $$[QT_INSTALL_DOCS] to qdoc by
default. However, if you want to force the generation of URL links to
the documentation, the option cannot be specified.
By setting the QMAKE_DOCS_INSTALLDIR variable in default_pre.prf a
project may override it at will, as for example Qt Creator would do.
Change-Id: Ib31f03acf4e8050cf2dd3aa33f3a10ed027f1df7
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
syncqt may generate that file also as a result of configure tests. so
just check for the file's existence instead of trying to reproduce under
which circumstances it should appear.
Change-Id: Ia24f96b05fc70e104f7be19d08cea614ffb505be
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
otherwise we are breaking the "less hacky" configurations. whoops.
Change-Id: Ibb037753fbaf30beae3d30173be77d48b978b60b
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
moving the detection of .qmake.cache to the qmake startup had the side
effect that a suddenly popping up cache would not be picked up by
nested projects any more.
this is not supposed to work in the first place, but the syncqt hack for
building against non-installed modules relies on it. until we have
cleaned that up properly, we need a way to notify qmake about the
appearance of the cache file.
Change-Id: I450646b936e3bb2ef2ed3aba05df58e521ccdc61
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This feature is only available to advanced qmake clients who have their
own defaults_pre.prf, where QMAKE_SYNCQT_OUTDIR is set before loading
Qt's own default_pre.
This is useful to be able to put the sync.profile file in a different
level in the source tree than where you want the output in the build
tree.
An alternate/complimenting solution would be to allow the output path
to be overriden from within the sync.profile file.
Change-Id: I3cdef82dbe492877507e269e18571456beeb2b7d
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
An extra script is added (qtmodule-configtests) which is currently
invoked from syncqt (with some derived parameters passed to it).
The module can optionally have an entry in the module's sync.profile
file in the form of a perl map of "test name" => parameters. Tests
can print an advisory message if they fail (e.g. "Install this
SDK/dev package"), or abort the syncqt process (e.g. mandatory
prereq missing). Also, if the test has a "requires(foo)" line
that results in it being skipped, this is also supported.
Change-Id: Ic3c820a488a0992c944994d4d7dc283da36742d6
Reviewed-on: http://codereview.qt.nokia.com/928
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
In debug_and_release builds, we have three passes, the glue
pass, and a pass for each build type. We only need to run
syncqt when we are in a glue pass, which is when
'build_pass' is not set. In non-debug_and_release builds,
build_pass is never set, so this condition works for all
build types, with multiple configurations or not.
Change-Id: I191da0df3ad422bb5fb8994391c2b2d2e23efc32
Reviewed-on: http://codereview.qt.nokia.com/1717
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When the build directory is the install directory, separate modules
should use qtbase as the path for libs, module pris etc.
This fixes the logic in default_pre.prf so that syncqt is called
correctly in these cases.
Change-Id: Ib3798bfd145d3a3e43b9a222af46270245e6c2e6
Reviewed-on: http://codereview.qt.nokia.com/464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Eckhart Koppen <eckhart.koppen@nokia.com>
It can be hidden with -silent, however.
Change-Id: I6dbd3c743779b8d2070e41f007df26b530987429
Reviewed-on: http://codereview.qt.nokia.com/235
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
We use syncqt to generate .qmake.cache also for submodules, which
contains the location of forwarding module profiles for that module.
This enables us to build without having to put module profiles into
mkspecs/modules until install time.
Also added support for -developer-build to syncqt.
What it does is to point build directories for binaries and
libraries to a common location in QtBase. This is more
convenient when doing development, since you don't need to set your
path to every module's bin/ directory, but it cannot be used with
release builds, since they need to build independently of QtBase,
in their own directory.
Change-Id: I959c62c11c644f2147a98da894a72452d9c44327
Task: QTBUG-19585
Task: QTBUG-19583
Reviewed-on: http://codereview.qt.nokia.com/232
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
If the user has set QTDIR to something other than the location of the
qtbase build directory, syncqt will fail.
This change prevents the build from continuing. Ideally, the system
should ignore the user-set QTDIR value or give an appropriate error.
Reviewed-by: Rohan McGovern
This will normally only happen for top-level pro files,
and syncqt is smart enough to not touch already existing
files. And in edition, syncqt uses the original file's
timestamp on the fwding files.
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12