In qmake land the define is set in mkspecs/common/macx.conf which
means it should be public for all Qt consumer apps as well, not just
internal targets. Make it so.
Amends 17be43c58e
Task-number: QTBUG-83929
Change-Id: I9f9d7dfca24b54977cb8364723c3618d3fec2e73
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The large file flags in qmake land are set in the
mkspecs/features/unix/largefile.prf file, which is loaded by qmake
when a CONFIG += largefile entry is written by configure into
qmodule.pri.
This essentially makes them global flags for all private Qt targets
because qmodule.pri is a global file loaded load(qt_build_config)
Thus assign the flags onto the PlatformCommonInternal target instead
of the PlatformModuleInternal one.
One peculiarity though is that in qmake land these flags are also
applied when building examples as part of the main Qt build. This
is because qt_build_config loads qmodule.pri even for an example,
because qmake sees it as part of the overall Qt build.
The flags are not applied by qmake if the example is built in
a different standalone build dir not part of the Qt buil dir.
We don't do that in the CMake build, and thus examples will never
have those flags.
Task-number: QTBUG-83929
Change-Id: If653a669b4835aadd1de84acb477c375ab523909
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The qt_internal_apply_gc_binaries function should apply both compile
and link flags, not just link flags.
The flags should be applied publically to all consumers of Bootstrap
regardless if the gc_binaries feature is enabled.
The flags should be applied publically to Core only in case if the
feature is enabled (aka for static builds only).
Change-Id: Id42af0d9b527004d74c04eff2c9e3c2be1e76aac
Fixes: QTBUG-84461
Task-number: QTBUG-83929
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This mirrors what qt_tool.prf does.
Task-number: QTBUG-83929
Change-Id: I892a3f5f62d461456abfa414718fcc4c4c05c012
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Like in the qmake build, we now set the target description of a Qt tool
to a value, different from the description of the Qt libraries.
Fixes: QTBUG-84900
Change-Id: I93419ddd513c83fe8488e70b5a8328cadc3541c7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a qmake build this file serves the purpose of setting the right
prefixes for the build directory's qmake binary. This can be used to
build Qt repositories other than qtbase, esp. in a top-level build.
In the CMake build, we don't have qmake top-level builds, and we do not
support building Qt repositories with the build directory's qmake binary
(exception: non-prefix build).
To build a Qt module or user project with qmake, the installed qmake
must be used.
This fixes qmake for non-prefix top-level CMake builds.
Change-Id: Ibd10c36e8359225553d782d0c8117760db9f3370
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In static builds, due to our CMake design for auto-linking plugins
being incorrect we sometimes cause link failures on Linux in leaf
modules, because the link line order is incorrect.
So far such failures were fixed by explicitly modifying the order of
libraries on the link line in each failing CMake project.
This proves to be problematic because the failures appear in seemingly
random integrations that don't even touch the build system parts.
Until we fix the design, another less performant but more
general / safe way is to increase the link interface multiplicity,
which causes a cycle of libraries to be repeated more than 2 times
on the link line, thus giving the ld linker more chances to figure out
which symbols are needed for linking.
Implement this for Linux static builds to avoid random integration
failures for people that know nothing about this issue.
The link multiplicity for all qt modules is increased to 3, thus
QtGui would be repeated 3 times on the link line of each dependent
library. The value is also configurable via the
QT_LINK_CYCLE_MULTIPLICITY cache variable.
Task-number: QTBUG-83498
Change-Id: I2fd2bb2b5e7fec4e3ef5d1194668b524d20f7067
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
To be in line with the qmake build we drop the "d" suffix for MinGW
debug libraries unless the debug_and_release feature is enabled.
Task-number: QTBUG-84781
Change-Id: I1b83492bff561d3d7647dde467931ec3866ae940
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When doing a top-level build,
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX is not set in the
top-level scope. There's no point really in using the relocatable
path anyway, given this will only be displayed once when either
configuring qtbase or qt6.
Just use CMAKE_INSTALL_PREFIX directly.
Change-Id: Idb7e1953745f55048c42155868c2dd9384876c7c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It used to be called HAVE_DASH_UNDEFINED_ERROR, but that always
cause Coin to print the compile check as the first build error snippet
because it contains the word "error", and whenever you get emails from
Gerrit the first snippet is always this compile check.
Rename it to avoid confusion in emails and Coin status reports.
Change-Id: I5487623abf9df177b100d2b45635688504f0e25a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For static builds of Qt we installed the plugins into the lib
directory. However, they are expected in the plugins directory tree.
This happens, because we pass a value of an uninitialized variable to
ARCHIVE DESTINATION in the qt_install call in qt_internal_add_plugin,
and CMake defaults to "lib".
This flaw was introduced in b42feb02ce with the following intent:
"This patch also changes add_qt_plugin() to use the value provided in
INSTALL_DIRECTORY for ARCHIVE_INSTALL_DIRECTORY if no value is provided
for the latter."
The patch changed the value of arg_ARCHIVE_INSTALL_DIRECTORY but
missed to set the variable archive_install_directory, which is
actually used in the qt_install call.
We now directly set archive_install_directory and remove the unused
archive_install_directory_default variable.
Task-number: QTBUG-84781
Change-Id: Ifd0475d8452272e8765bf42fd912a45cfa3dbbd1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Because find_package usually creates targets in a local scope,
qt_generate_prl_file fails to generate a .prl file that has
references to generator expressions like
"$<TARGET_FILE:Freetype::Freetype>" which references targets
that are not found in that specific scope (e.g Freetype target is
present in qtbase scope, but not qtsvg scope).
This happens in static top-level Qt builds, and thus fails the
configuration. While we try to figure out how to fix this adequatly,
don't generate .prl files in such a configuration.
Task-number: QTBUG-84874
Change-Id: I69cf0ad1419d21e3676e1374624601f00936c405
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Users / developers usually configure a single example. The CI
can still continue to explicitly configure and build all examples.
Task-number: QTBUG-84471
Change-Id: I1c9ac857e7ad0e5602037265194f0a6742386b51
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Fixes the 'add_library cannot create imported target "dbus-1"
because another target with the same name already exists' error
when doing top-level static builds.
It's caused by the loading of Qt6DBus dependency when configuring
qttools.
Task-number: QTBUG-84874
Change-Id: Ia84ed460c4ce25de45fb41cb13edd0e63a276f11
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake_use.prf understands the _DEBUG and _RELEASE suffixes for
QMAKE_LIBS_XXX entries. The CMake configuration "Debug" is considered
for the _DEBUG entries, "Release" and "RelWithDebInfo" for _RELEASE.
The qt_lib_XXX_private.pri files are now generated in multiple steps:
1. The QT_LIBS_XXX information is generated per $<CONFIG> and written to
.cmake files.
2. A preliminary qt_lib_XXX_private.pri file is generated, containing
only configuration-independent data.
3. A custom command runs the QtGenerateLibPri.cmake script that combines
the files from step 1 and 2 into the final qt_lib_XXX_private.pri
file.
The same is done for mkspecs/qmodule.pri.
To be able to trigger custom commands from header modules, which are
interface libraries, we introduce one XXX_timestamp ALL target per
header module that creates a timestamp file. To that XXX_timestamp
target we add the pri file generation target as dependency.
Fixes: QTBUG-84348
Change-Id: I610f279e37feeb7eceb9ef20b3ddfecff8cfbf81
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module pri files of internal modules did not expose any include
paths. They must have both, the public and the private include paths.
Task-number: QTBUG-84781
Change-Id: I3cbe94d4e49c754e49d26b00012e668b0afbdc8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MinGW plugins should not have the lib prefix in the shared library
names. Do this manually for a couple of libraries, and also for the
generic qt_add_cmake_library function.
Amends 9b0e23ef8a
Change-Id: I1cfaf8fc046f86edd3e755adfa599aa0aa854ee3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed so that other repos other than qtbase (like qtopcua)
can still find_package(WrapOpenSSL) successfully.
The path needs to be converted to a CMake path, to avoid issues
on Windows with backslashes.
Change-Id: I3d7652d93110f6b8f39a58a6c28aef6c7471aea7
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT might be empty on the
first configuration, but because QtBuildInternalsExtra sets the
CMAKE_INSTALL_PREFIX, a second reconfiguration of a test would
stop setting the fake install prefix.
After some further consideration, there's no need to set the local
fake prefix conditionally, we can always do it (unless explicitly
opted out).
This makes sure that a reconfiguration of a test doesn't suddenly
install into the Qt prefix again.
Amends 37b132cd4e
Task-number: QTBUG-84346
Change-Id: Ic61aefe18418658455d8cdb9ebe6bcbcb8d67c99
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
They are not necessary, and they conflict with what qttools generates.
Fixes: QTBUG-82133
Change-Id: I4a1273d694626345b32b45c653dd31d3b78621eb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now that the whole file is not included when doing standalone tests,
the conditions are not needed anymore.
Change-Id: I49ddd2fc4a8327e09529948785f40cda5dedbb11
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Three different people have encountered the issue that calling
calling qt-cmake on a project prints 1000 inclusion lines of the same
qt toolchain file, and then CMake bails out saying can't find the
CMAKE_MAKE_PROGRAM Ninja.
This happened because people accidentally called qt-cmake to configure
qtbase (instead of just cmake), which created a toolchain file that
chainloads itself recursively.
Error out when configuring qtbase, and when using the generated
toolchain file in the case when it would try to include itself.
The solution is to remove the qtbase CMakeCache.txt file, and
configure qtbase again, so it generates a proper qt.toolchain.cmake
file.
If somebody feels enthusiastic, they can move the check into the
qt-cmake and qt-cmake-private shell scripts, and error out before the
qtbase/CMakeCache.txt is polluted with the wrong toolchain file.
That is left for people that feel more comfortable with bash and batch
scripting.
Change-Id: If518c94791fe7c30731e6e462e347f26a5213c64
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Include headers in .pri files should point to the framework Headers
dirs.
The module name in the .pri file is not versioned when it's a bundle.
Paths to system frameworks in .prl files should instead be replaced
with -framework Foo flags.
Change-Id: Ia353d033799fae40a1bc55fad6f86b2c8ef76c56
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We reported that double-conversion was found on macOS if the std
library supported sscanf_l and _snprintf_l, but that's different
from what qmake does.
This caused not to compile and link the bundled double-conversion
sources, and caused tst_qvariant to fail when doing double conversions
on macOS.
Remove the extra config tests, and make it work like in qmake, so that
the bundled code is used instead. This makes tst_qvariant pass.
Amends 729a73a9cf
Change-Id: I7ddaed5fe6916f483fb3de1962657d7fb6fb40be
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
And also fix qt-cmake-standalone-test to work for prefix builds.
The gist of it is that we have to protect tests not to be installed
into the Qt install prefix, but we also have to make sure that the
CMAKE_INSTALL_PREFIX is not changed globally (via cache value),
so that reconfiguration still works.
This took way too long to figure out.
Amends d6272d774c
Fixes: QTBUG-84346
Change-Id: I18c29574c9957fe05b86f701c8c14ec07e0f045b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Qml tests currently don't expose a CMake target, so no
dependency should be added to a non-existent target.
Make sure to add the check target only if the test was previously
added.
Fixes configurtion failure of qtdeclarative tests.
Amends 873aa682c5
Change-Id: Ic8bbfe668c00c1ce05f1e1dfe5494dafd91dd7b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch allows tools to be built for the target platform when the
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING parameter is set at configuration
time.
To avoid naming conflicts, the target tools are suffixed with "_native".
The qt_get_tool_target_name() function can be used to get the tool name
for both scenarios (cross and non-cross compilation).
Extend pro2cmake to refer to the right target name for tools.
The relevant write_XXX functions have a new target_ref parameter that
will be "${target_name}" for tools and literally the target name for
everything else.
Fixes: QTBUG-81901
Change-Id: If4efbc1fae07a4a3a044dd09c9c06be6d517825e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Given a test named "tst_qdrag", you can run "ninja tst_qdrag_check"
to build and run the test.
Change-Id: I47dccb39dd60fca9cb07ff9af9fb739b293c5aaf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This avoids issues with some special characters and spaces.
Change-Id: I6b7cedbe2c9663f62fae104488454faebab52ce0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake sets "lib" as default prefix for Windows-GNU platforms.
Change-Id: I49e3123c385610307c84c584a21f5f3827a6fafd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The function name has been changed upstream (3.18).
Change-Id: I76a26cdc8de71dffa5402a7c7423006a7a01552e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's only calls were with the PUBLIC argument, so remove the argument
both in the declaration and call sites, and just return the public
dependencies.
Fix up the names of the variables as well.
Amends b56dc55c3a
Change-Id: I830c1894376d0d3a2eb2bd4ffa38a1b3b3066292
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously we checked the LINK_LIBRARIES property of the main module
target, but we should instead use the values of
INTERFACE_LINK_LIBRARIES set on the FooPrivate module.
Because both versionless targets and private targets are interface
libraries, we need to properly differentiate between them when
following versionless targets to their main associated target.
To do that, instead of using string comparison, export an additional
private _qt_is_versionless_target property, and query that.
Also make sure to set and export the _qt_config_module_name property
on the FooPrivate targets.
Also make sure to APPEND to EXPORT_PROPERTIES rather than override
(looking at you QtFeature.cmake).
Task-number: QTBUG-75666
Change-Id: Ia3261e218840e9f5217ab49755e8c876560e294d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Needed to avoid linker warnings transformed into errors, when linking
QtWebEngine with qmake mixing.
ld: warning: linking against a dylib which is not safe for use in
application extensions:
The flag is added to libraries and plugins, unless opted out.
CMake equivalent of 944110089d
Task-number: QTBUG-83929
Task-number: QTBUG-75666
Change-Id: I3e9acca4712c9a266bf54c6e35e2fd2c0096692b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt module targets now export the "_qt_config_module_name" property,
which contains the module's name in qmake land. This can be different
from the lower case target name (e.g. Test vs testlib). This exported
property is used when retrieving the dependencies of a module outside
of qtbase.
The property's name is a bit odd and lower case, because we want to be
able to set it on INTERFACE_LIBRARY targets, for instance header
modules. This CMake pecularity is described in
https://gitlab.kitware.com/cmake/cmake/issues/19261
Fixes: QTBUG-84287
Change-Id: I4a75af3ebeabebc56a0f77d464e45ab7fd81eafa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit e875f45805.
Reason for revert: syncqt creates a master header that includes
the *Depends header. Therefore we must always create the *Depends
header. Ignore for now that *Depends headers are empty and pointless
for module headers.
Change-Id: I1dcc836788b3d46c4f1b504d2d64e9eb67b66206
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For now, we have to turn off the 3rdparty lib generation code for
qt_lib_XXX.pri files, because it's broken for NMC if the 3rdparty
libraries have different binaries per config.
The actual fix is more involved.
Task-number: QTBUG-84348
Change-Id: I863e69085b68c0dbbb3f6c415111bc255799e155
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a qt_finalize_module function that is called as a
CMakeLists.txt finalizer and call qt_generate_module_pri from there.
This is done in preparation for writing the QT.XXX.depends entries to
the module pri files, because we must do this after all dependencies
have been added.
Change-Id: Ia61db73383541651389fd647523ef535792874d4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If an OUTPUT_DIRECTORY option is provided, it should be used instead
of discarding it.
Change-Id: Ie53b56616f16589f7c05ff9378d7ba2e2ba34726
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The module pri files are supposed to add their public features to the
global QT_CONFIG variable.
Change-Id: I9a1719f897747a1d89011b1f1231c05a23539def
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid writing module_plugin_types-NOTFOUND into the module .pri files.
Change-Id: I2fed7b0d1c21e2233eebcaca419f522a07d22af4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Calling cmake --install . only installs a single configuration.
To install both debug and release artifacts, the install
invocation needs to be done for each configuration.
To keep the Coin instruction code simpler, delegate the looping
over configurations to a custom CMake script, and use it in the
Coin instructions.
Replace all cmake --install calls in the instructions with calls
to either call_host_install.yaml or call_target_install.yaml.
The path to the script depends on whether we are building
qtbase or another module. In the former case the script should
be called from the build dir, otherwise from the install dir.
The other distinction is whether the host or target env prefix
needs to be added.
Task-number: QTBUG-80900
Change-Id: Ied4bf739e2b1a2307f22fc79c1cfad746c8cbc44
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When using Ninja Multi-Config, we don't want to install a "Release"
moc.exe, and then override it with a "Debug" moc.exe.
Because it doesn't seem possible to exclude installation of targets
per configuration, put the non-main configuration tools into
configuration specific subfolders like "bin/Debug", so no overriding
happens upon installation.
Introduce a new function qt_get_install_target_default_args() which
returns install destination arguments for consumption in qt_install()
calls. The function adds the config-specific suffix to the destination
for the appropriate configs.
Each call to qt_install *adds* new rules for installation,
which means that export registration needs to happen only on the first
call.
Make sure qt_add_tool doesn't ask qt_add_executable to install
yet again, to create duplicate rules.
Apply the same install arguments logic to qt_add_executable calls.
Task-number: QTBUG-80900
Task-number: QTBUG-80901
Change-Id: I3e732d27dba5bf5f8059d2878ef1e425237d383a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Thus we will build both Release and Debug configurations in Coin
when cmake --build . is executed, mimicking qmake's make which
builds both configurations in debug_and_release.
Task-number: QTBUG-80900
Change-Id: If48aca249eb84e690d3f9d51a733b3a25df1f7ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Where NMC is the CMake Ninja Multi-Config generator.
The first use case is to allow building standalone tests with one
configuration even if Qt was build with multiple configurations.
Another use case is for regular Qt consumers that might use the
generated qt-cmake shell script which does not have the generator
specified (as opposed to qt-cmake-private).
Another detail is to use the first configuration from the initial
Qt configurations list (CMAKE_CONFIGURATION_TYPES) when building
standalone tests with a single config generator, so that it doesn't
default to Debug, but rather to the provided first configuration.
This matches qmake behavior, where on Windows with a
debug_and_release configuration, tests are still built against
release.
Task-number: QTBUG-80900
Change-Id: I0da91c1f91095332cfe9e38d17f440aad6a09d15
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Set the target property INTERFACE_MODULE_IS_HEADER_ONLY for
header-only modules, and only create *Depends header files if this
property is falsy.
Change-Id: Ic6b100787d18b3ff1f7b9d0f2b5c744018b1f295
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This value is the equivalent of qt_module.prf's MODULE_INCNAME and can
be used to specify a name for the module's include subdirectory. The
default is Qt<ModuleName>.
The include name is stored in the module's target property
MODULE_INCLUDE_NAME.
Change-Id: Ie6c8f6882ee2c3db78884ae5781593c803be3c05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And enable the same default when building Qt itself (it's implicit).
Allow opting out on a target-by-target basis, by using the public
qt_disable_utf8_sources() API call.
Change-Id: Ifc19a744d57b96b1c74a6926a0c6628c2a820464
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before, we were setting those properties only for Qt modules.
Now, Qt executables and plugins have a full VERSIONINFORMATION
resource on Windows.
Also, extend the CMake API with the possibility to pass target
information to modules, plugins and tools. This will be used in a
subsequent commit.
Change-Id: I2bb8d3637569e0eaec76f56331bc23282285d872
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed for building Qt plugins with qmake against other
CMake-built modules.
Change-Id: Ibd6ad0b08645c798be74285b24f71add947bea88
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise when applied to bundled 3rd party library C files,
the MinGW build fails when compiling src/3rdparty/md4c/md4c.c.
Change-Id: Ia522b10aa69aa15f239d20c65e31c84edbccee6d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Due to the install prefix being changed for standalone tests,
the correct $qt_prefix/bin folder was not added to the PATH
environment variable when running tests.
Make sure to always include the the original qt install prefix,
even if a different install prefix is specified when configuring
standalone tests.
Amends 39090ea15c
Change-Id: I22aab732bb2bb679074a811d28d8209e1d535df3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Gets rid of mismatch warnings when looking for various
ECM packages like XCB.
Change-Id: I0bf4db993195993df7789c032454b7883e8efd35
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Enable sse2 and fpmath for modules when appropriate, the logic
is a port of the code in mkspecs/features/qt_module.prf.
Fix qdrawhelper.cpp to always be compiled when using GCC with a
special case. pro2cmake.py failed to handle the source subtraction
correctly.
Fixes: QTBUG-83791
Task-number: QTBUG-75578
Change-Id: Ibe32a250b266d580ad21f6c55f09fd03a14ceb82
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
... and update handling of CLASS_NAME in qt_internal_add_plugin
Change-Id: Iec8e5f9f80df02c9ba21648535872988839f4b64
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Traditionally, these make targets generated HTMLs
and QCH only. This change fixes the dependency for
these targets to ensure that behavior.
Fixes: QTBUG-83877
Change-Id: Ic7c8afe5853d33fc4cc4cfd996f87e5f65df31ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
It broke configuration of qtwayland standalone tests, due to qtwayland
doing 3 separate qt_find_package(Wayland) calls with the same package
but different arguments in 3 different directory scopes.
The top scope didn't have PROVIDED_TARGETS argument. The rest of the
scopes did have the arguments with either Server or Client, but because
of the debug behavior above being enabled by default the dependencies
weren't registered in the Qt6WaylandClientDependencies.cmake file (and
the server equivalent).
The registration didn't happen due to the skipping logic, when a package
is found and the targets already exist.
This led to standalone tests failing to configure because they tried
linking against non-existent Wayland::Client and Wayland::Server
targets.
This reverts commit dd7e40b108.
Change-Id: I60e358a4891b84ecec0e127d9de8ab9747a6ab24
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Previously configuration of standalone tests might have failed
due to CMake trying to create files in the /usr/local default
prefix.
Make sure to use a fake prefix in the binary dir instead,
unless another prefix is explicitly specified.
Change-Id: Icfcb32285aa5596abf1a918396b26673880a8d27
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMake IMPORTED targets should be namespaced so that CMake knows that
the name refers to a target and not a file.
Use the existing WrapXXX naming scheme where applicable.
Fixes: QTBUG-83773
Change-Id: I5b0b722c811200c56c260c69e76940a625228769
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a SKIP_AUTOMOC argument to qt_add_3rdparty_library and use it in
BundledHarfbuzz.
Change-Id: Ie4aa61639a5ab64f286ac539989572a9ae6bc3d5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to the wrong string comparison, we were writing out the wrong
architecture for the arm64 builds to the deployment settings json file.
This leads to androiddeployqt tool not being able to locate the
stdlibc++.
Change-Id: I3d13b14c27f043445bf46aaca0e9f862f6ca84e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch allows all the sqldrivers to be built as a standalone project.
It is not possible to build each plugin separately due to the configuration
features definition being located in the sqldriver's folder CMakeLists.txt.
In other words, the project needs to be generated from the
src/plugins/sqldrivers/CMakeLists.txt file.
Fixes: QTBUG-82962
Change-Id: If41c7e3827589391830a894a9c998d2e56239562
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Without this behavior enabled by default it is currently not possible to
build QtVirtualKeyboard as a static build. We run into the error where
cmake is trying to promote the targets to be global due the XCB library
already being found by one of the modules in QtBase.
In case we wish to disable this fix, any module can simply specify
QT_FIND_PACKAGE_DISABLE_DEBUG_BEHAVIOR=ON during configuration time.
Change-Id: Id7f2ad12ddea941dda754361660c7606439cd5a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a publicly callable qt6_add_plugin() API to create
plugins. This API is meant to cover cases such as the plugandpaint
example.
This patch also renames qt_add_plugin to qt_internal_add_plugin in order
to avoid clashes with the public API. To avoid breaking the existing
projects, a compatibility wrapper function is enabled by default unless
QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY is specified.
Fixes: QTBUG-82961
Change-Id: If5b564a8406c90434f1bdad0b8df76d3e6626b5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a negated feature config value like the following:
qt_feature_config("foo" QMAKE_PUBLIC_QT_CONFIG NEGATE)
If this feature was disabled, it would turn up in both,
enabled_features and disabled_features of module .pri files.
Also, QT_CONFIG would contain foo.
Expected however is that QT_CONFIG contains no-foo, and only
disabled_features contains foo.
Fix this by prepending a "no_" prefix to the value, similar to the
"no-" prefix in the qmake build. The qt_correct_config function was
adjusted to recognize "no_foo" and translate it to the qmakeish
"no-foo" config value.
Config values that start with "no_" but do not correspond to a feature
are left untouched. You can still have values like
"no_valley_too_deep" or "no_mountain_too_high".
Change-Id: I23d8b18c84e04ea6dfa25cc6ccd8f7e86211b144
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move QT6_ADD_RESOURCE to Qt6CoreMacros in order to avoid the extra
config file step.
Change-Id: Ib445ca35c648cf344ee8795de8bdddc0f0758972
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since there's no way to register callbacks or to store functions to be
called later in CMake, the only way to isolate the quick compiler
behavior for qt_add_resources() is to wrap it in a conditional check.
As soon as someone loads Qt6QmlMacros, the variable will set and the
functionality will be available.
Change-Id: I5fbdf2966e7dfdc734512a5b2b973e0ace9da5df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Once we can require CMake 3.17 everywhere, we can remove the variable
set up from QtSeparateDebugInfo.cmake.
Change-Id: I91572583654054f5fa47ac1e41be23050a5a8c0b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a non-prefix build, the module .pri files must end up in the
mkspecs/modules subdirectory of qtbase's build directory.
Change-Id: I241f4e274d31de7c1e3c2fa8e5e26fb8747f11c5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Implemented some necessary functionality to generate correct .pri
information, so that qmake can build modules.
Task-number: QTBUG-75666
Change-Id: I63281adfef3d01385928b1d8c4be0b32ac97c4d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit also adds a qt_finalize_module function that is called for
every Qt module after all link dependencies have been added.
Change-Id: I489d188d05e368208a8a62828bb12fb395df54bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't want people accidentally installing tests into the
Qt prefix.
Change-Id: Ic99492559875f753897a83af162253cac846a8a5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The install prefix in such a case is the qtbase build dir,
and not the qt6 top-level build dir. This caused issues with
certain incorrect paths being generated, including a broken
qt-cmake-standalone-test script, as well as upon reconfiguration
determining that a non-prefix build should be installed.
The fix for a non-prefix build is to check explicitly for
the qtbase build dir. This works both for super and non-super
builds.
Task-number: QTBUG-83496
Change-Id: Ida2393176c4c81da767023ff48159afdedfb0a19
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CMAKE_INSTALL_RPATH cache var had the PATH type, which made
CMake transform the value into an absolute path, getting rid of the
$ORIGIN value.
Fix that by changing the cache var type to STRING.
Also clean up the all-caps commands, add a usage example and print
the install RPATH.
Change-Id: Ibf40cfde4283369ddfcf52609143799cc8e47d68
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is required to support QtVirtualKeyboard's third party OpenWnn
library.
Change-Id: I64b6a2b6b6b0259bea5aa249a8c901def31f916c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a find_package() in a try_compile project doesn't find a package,
and we then link against a non-existent target, the configuration
failure of the compile test also fails the configuration of the
project.
To avoid that, separate library targets from non-targets, and make sure
to only link against the targets if they exist.
pro2cmake now outputs modified compile test project code which iterates
over targets and non-target libraries, and links against them when
needed.
Change-Id: Ib0f4b5f07af13929c42d01a661df2cabdf9b926b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Coin when provisioning for Android, we download and configure
the OpenSSL package, but don't actually build it. This means that
find_package(OpenSSL) can find the headers, but not the library,
and thus the package is marked as not found.
Previously the openssl_headers feature used the result of finding
the OpenSSL package, which led to it being disabled in the above
described Android case.
Introduce 2 new find scripts FindWrapOpenSSL and
FindWrapOpenSSLHeaders. FindWrapOpenSSLHeaders wraps FindOpenSSL,
and checks if the headers were found, regardless of the OpenSSL_FOUND
value, which can be used for implementing the openssl_headers feature.
FindWrapOpenSSL uses FindWrapOpenSSLHeaders, and simply wraps the
OpenSSL target if available.
The find scripts also have to set CMAKE_FIND_ROOT_PATH for Android.
Otherwise when someone passes in an OPENSSL_ROOT_DIR, its value will
always be prepended to the Android sysroot, causing the package not
to be found.
Adjust the mapping in helper.py to use the targets created by these
find scripts. This also replaces the openssl/nolink target.
Adjust the projects and tests to use the new target names.
Adjust the compile tests for dtls and oscp to use the
WrapOpenSSLHeaders target, so that the features can be enabled even
if the library is dlopen-ed (like on Android).
Task-number: QTBUG-83371
Change-Id: I738600e5aafef47a57e1db070be40116ca8ab995
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The previous approach didn't work for prefix builds. While a target
might be excluded from building via EXCLUDE_FROM_ALL property, when
calling make install it would still try to install the target and
thus fail.
It's not possible to modify an install() command in a post-processing
step, so we switch the semantics around.
pro2cmake will now write a
qt_exclude_tool_directories_from_default_target() call before adding
subdirectories. This will set an internal variable with a list
of the given subdirectories, which is checked by qt_add_executable.
If the current source dir matches one of the given subdirectories,
the EXCLUDE_FROM_ALL property is set both for the target and the
qt_install() command.
This should fix the failing Android prefix builds of qttools.
Amends 622894f96e
Change-Id: Ia19323a2ef72a3fb9cb752ad2d4f2742269d11c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
list(JOIN) removes a layer of escaping, which force doubling up
on the backslashes. Instead use string(REPLACE) thus making the
escaping a bit saner.
Change-Id: Ie3daf0112dd09fbcbaf8798552949470952611c9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Android, check_language() reports that the languages are supported,
but enable_language fails afterwards.
On Linux it causes issues with the PCH. The PCH file might contain
a Clang pragma, even though the C++ compiler is GCC. Presumably due
to finding a Clang Objective-C compiler.
Change-Id: I1b4c54459772c089e7f6350872c87af52ad72a37
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
configurejson2cmake handles the 'static' and 'shared' features now.
There's no need to special-case it anymore.
Change-Id: I956e9f46ebe022b1da862e986ec05f41e1e804e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
configurejson2cmake handles the 'rpath' feature now. There's no need
to special-case it anymore.
Change-Id: I9aa9c9acdeb586de09d8a8d269909f8acb02e40a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add -Wno-error=format-overflow. This is similar to what is done in
qt_common.prf, however we don't turn the warning off completely.
For now at least.
Change-Id: I93c20064759dea43309c3a17de4d733ede9ca2cb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Starting with CMake 3.18, there is PCH support for darwin multi-arch
builds, like iOS simulator_and_device builds.
Also enable PCH for Objective-C++ files when the support is there.
To enable PCH for Objective-C++, we need to do enable the OBJCXX
language as well, but conditionally, because on non-darwin platforms
the language is probably not available.
Introduce the qt_enable_cmake_languages() macro which is called
automatically by qt_build_repo_begin().
Change-Id: I0e7f44be6577ac54ce940470036626409920e272
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some library entries in configure.json have a test entry.
An example is assimp in qtquick3d.
qmake tries to find the library via the sources section, and then tries
to compile the test found in config.tests/assimp/assimp.pro while
automagically passing it the include and link flags it found for assimp.
We didn't handle that in CMake, and now we kind of do.
configurejson2cmake will now create a corresponding
qt_config_compile_test call where it will pass a list of packages and
libraries to find and link against.
pro2cmake will in turn generate new code for the standalone
config.test project. This code will iterate over packages that need to
be found (like WrapAssimp) and then link against a list of passed-in
targets.
In this way the config.test/assimp/main.cpp file can successfully
use assimp code (due to propagated include headers).
qt_config_compile_test is augmented to take a new PACKAGES argument,
with an example as follows
PACKAGES PACKAGE Foo 6 COMPONENTS Bar
PACKAGE Baz REQUIRED
The arguments will be parsed and passed to the try_compile project,
to call find_package() on them.
We also need to pass the C/C++ standard values to the try_compile
project, as well as other try_compile specific flags, like the
toolchain, as given by qt_get_platform_try_compile_vars().
Change-Id: I4a3f76c75309c70c78e580b80114b33870b2cf79
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The target may not be defined which causes error:
get_target_property() called with non-existent target "qtwaylandscanner".
Change-Id: I58a9122456ccbbbb8fc9f0adce3b7ddcc985e6a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Installing headers is not supported for 3rd party libs (we don't run
syncqt, we don't install headers for 3rd party libs to
prefix/include).
Remove the unnecessary condition.
Change-Id: I46e9af7a7ca9de0138666b0d0faffc86238672ba
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When creating the include/QtShaderTools/QtShaderToolsDepends file
in QtPostProcess.cmake -> qt_internal_write_depends_file(),
we decide which include files to append based on link dependencies
starting with Qt::, which happens to match 3rd party targets like
Qt::BundledSpirv_Cross which doesn't expose headers in the
prefix/include dir.
Mark all bundled targets with the QT_MODULE_SKIP_DEPENDS_INCLUDE
property to exclude them from being added to Depends files.
This should fix static builds of qtquick3d which includes
<QtShaderTools/QtShaderToolsDepend> which tries to include a
non-existent <QtBundledSpirv_Cross/QtBundledSpirv_Cross>.
Change-Id: I9dcff1e2ab721a7c21fcff3fda0faf8d023d60ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The path where we install plugins is usually
prefix/plugins/plugin_type/plugin_name
The plugin_type should not be escaped, so it should be used verbatim
(no escaping of slashes or dashes)..
So far it seems the only weird plugin types are wayland plugins which
contain dashes, like wayland-shell-integration, and the sub-ios plugin
which has a slash (platforms/darwin).
For cmake properties we use the escaped names.
This should fix tests in wayland where the wayland plugins can't be
found.
Change-Id: I93406731b8c872a82c0f247f5b7c6bdab4875455
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qt uses the qtNomakeTools() function to mark a directory which will
not be built as part of the default target. This is especially
important when cross-compiling (to iOS for example) because the build
process might fail.
The condition for not building these "GUI tool sub-directory projects"
is the absence of the "tools" value in qmake's QT_BUILD_PARTS
variable.
Introduce a QT_NO_MAKE_TOOLS CMake variable. If the value is true,
it's equivalent to "tools" not being present in QT_BUILD_PARTS.
Introduce qt_exclude_tool_directories_from_default_target().
It's the qmake counter part to qtNomakeTools().
Teach pro2cmake to generate it where appropriate.
Change-Id: If2e5958d91847ab139af0e452608510286e73fa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Like libs, tools, examples, tests. Built by default means
they are part of the default make / ninja target.
Change-Id: I304e5724fc5dbd39626e9d589a6e1e92a4dd7882
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Such a case can happen when cross-compiling. Tools currently are not
built when cross-compiling, so if the desktop tool was not built,
accessing properties on that target would fail when trying to set up
the documentation building.
Change-Id: I2ffcbb9623df3e4daacdf4be3f48c4b2dd13851b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QT_STATIC must be defined for static builds to have the right
import/export symbol macros defined. Originally, this macro is wrapped
in a condition. That's why we extend qt_feature_definition to be able
to write a prerequisite to qconfig.h.
Change-Id: I610e60acc7f5bdc031eff6d53a76e0b229a5c8c2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The function qt_generate_module_pri_file did not take into account the
CONFIG_MODULE_NAME argument of qt_add_module.
This resulted in wrong file names and content, e.g. qt_lib_test.pri
instead of qt_lib_testlib.pri.
Fixes: QTBUG-83176
Change-Id: Id6991396cf9ea5a1d155aa15402c0d84a8a9d082
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
When cross-compiling with CMake, before this patch pkgconfig calls would
find libraries which are part of the host system and not the target
system.
The current approach used is based of the discussion present in
https://gitlab.kitware.com/cmake/cmake/-/merge_requests/4478, and should
be considered a temporary solution until the issue is properly addressed
in upstream CMake.
Change-Id: I535d4d48c2a5d34689082b80501b3b6ae30d7845
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For INSTALL_*DIR variables that have the the same value as
CMAKE_INSTALL_PREFIX, a second cmake run cleared the value. This is
because file(RELATIVE_PATH) returns the empty string if we pass the same
absolute paths.
Fix this by checking the return value of file(RELATIVE_PATH) for the
empty string and setting it to ".".
It's a limitation of qmake that empty strings are not handled as ".".
Change-Id: I8fc4d1eabcc9d5634be2f3741b0002a347dd17e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
PCH files were only used while building qtbase. Make sure the value
is exported to the BuildInternalsConfig file, so the value is re-used
when building other repositories.
Also disable PCH when building simulator_and_device iOS builds, because
CMake doesn't currently generate separate PCH files per architecture.
Change-Id: I79955ebc557b800bc3c704deac519fe80012c229
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Repos like qtshadertools need it when configuring their own
bundled libraries.
Amends 572c03eb7a
Change-Id: I540e99d5bd2938299a10220a1a5e0d97091077b3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qt_add_module checks for the existence of the following directory
include/QtFoo/6.0.0/Foo when deciding whether a private module target
should contain that path in its INTERFACE_INCLUDE_DIRECTORIES.
There are 2 cases when it's created, when running syncqt, and inside
qt_install_injections. If syncqt doesn't create it because there are no
private headers (like in qttools/src/global), qt_install_injections
created it at generation time (for injected configure headers like
qttools-config_p.h)
Unfortunately that caused the existence check mentioned above to fail,
not exporting the path in the QtToolsPrivate's include directories,
and failing the qttools build.
To fix that, create the injection files (and directories) at configure
time, using qt_configure_file instead of file(GENERATE).
Change-Id: Idd9b6ec36e986c4de95d11557170e1c70927211c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has the same kind of signature as file(GENERATE) but
creates the files at configure time rather than generation time.
CMake provides a few ways to generate files
file(WRITE) -> always overrides content
configure_file() -> only overrides if content changes, creates file
at configure time, can only take a file as input
file(GENERATE) -> only overrides if content changes, creats file
at generation time, can take a string or file
as input
Because dealing with an input file is a hassle (need to create one,
make sure it's installed, make sure it's used correctly in the
various build types like super-build, non-prefix-build, etc)
people tend to use file(GENERATE) instead, which can take a string
argument, and is thus easier to use.
Unfortunately that introduces subtle bugs because the
file is created at generation time, but there are existence
checks which are done at configuration time.
Thus qt_configure_file allows creation of files at configure time,
without having to provide an input file. Underneath it uses
configure_file(). Once CMake 3.18 is released, the implementation
can be switched to use file(CONFIGURE).
Change-Id: Ic8f8d88541ef0b25d01af143352c8c9ba390ad5f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Before this patch there were a few ways to build tests
- Configure all tests as part of the repo build
- Configure all tests as part of the repo build, but don't build
tests by default (-DQT_NO_MAKE_TESTS=ON)
- Configure all tests as a standalone project in a separate build
dir using -QT_BUILD_STANDALONE_TESTS=ON
All of the above incur some time overhead due to the necessity
of configuring all tests.
Sometimes you just want to build ONE test (or a few).
To facilitate that use case, a new shell script called
bin/qt-cmake-standalone-test(.bat) can now be used to configure
and build one or more tests.
The script takes one single argument pointing to the desired test
project path and configures a generic template project that sets up
all the necessary Qt CMake private API, afterwards calling
add_subdirectory on the passed in project.
Example
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon
or
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image
After that, simply run 'ninja && ctest' to build and run the test(s).
This is the CMake equivalent of calling qmake on a test .pro file
(or on a tests SUBDIRS .pro file)
There are 3 details worth mentioning.
Due to the add_subdirectory call, the built artifacts will not
be in the top-level build dir, but rather in a nested build_dir.
The script currently can't handle more than one argument
(the path to the project), so you can't pass additional
-DFoo=bar arguments.
If a test uses a 3rd party library (like Threads::Threads)
which was not a public dependency for any of the Qt modules,
configuration will fail saying that the target was not found.
Perhaps we should consider recording these packages when
generating the StandaloneConfig.cmake files.
Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously you could use either module-specific or
repo-specific 'docs' targets.
For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'.
Now there's a global / top-level target called
'docs', so 'ninja docs' works.
For super builds it will build the documentation of all
configured repositories.
For a single repo build, it's equivalent to calling
'ninja docs_repo_name'.
Also for consistency, add the "docs_Core" target, which was missing
before. So now a 'docs' target exsits for repo names AND targets.
New global target names are
- docs
- prepare_docs
- generate_docs
- html_docs
- qch_docs
- install_html_docs_docs
- install_qch_docs_docs
- install_docs_docs
Amends 0095ff4e06
Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Simplify the handling of simd specific sources. The previous
implementation was causing simd instructions to bleed into the main
library.
The tests were failing because the avx instruction were leaking into
Qt6Gui due to the previous problem. This in turn caused any test which
required Qt6Gui code run to crash since it is not possible to run avx
instruction in the VMs.
This patch also disables PCH for the simd sources as they result in
warnings related related to using PCH header not compiled for the
architecture in question. The latter can cause the build to fail in
conjunction with warnings as errors.
Change-Id: I1be98f2f5e967f33793d6a2e6134a24ef1709566
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
The exported INTERFACE_LINK_LIBRARIES property now looks a lot more
sane.
Change-Id: I093fcb242607023dd0b103298562b299cb803028
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The default Info.plist shipped with CMake lacks an NSPrincipalClass
entry, which is crucial for making macOS apps run in full resolution
on retina screens.
We make sure the file is only picked up on macOS, not iOS and friends,
since those platforms require another principal class. If needed we can
extract the value out as a CMake variable and use the same file for all
Apple platforms. Doing so would assume all keys are single-platform
only, so if that's not the case we need platform-specific files.
We should probably extract the package type out as a variable too,
so that the file can be used for both apps, plugins, and frameworks,
but doing so requires setting up that variable somewhere based on
the target type, which CMake doesn't allow in an easy way.
The file itself is based on the file CMake ships, combined with
keys inherited from Qt's existing plist templates for qmake, and
adjusted to match what Xcode generates by default these days.
Change-Id: I3f5109e5fff63cdbd109a99d4008948d4bd2102b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Uncovered while building qtdeclarative.
Change-Id: If1a36f2640a3a5d765e7ca74b0ba1d39ef2a18f0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's needed when building qtdeclarative.
Needs to be copy_or_install to support non-prefix builds as well.
Change-Id: Ied59f6a1f8403be3721a0ad46f5a3b2f569028ca
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka the version of C++ that needs to be supported when compiling
applications that use Qt headers (C++17 at the moment).
Change-Id: I64dec297e8329f31b1d9864f216a95782049ed06
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It is needed when cross-building Qt using CMake, where the zstd
feature might have different values between the host and target,
in which case the build system tells rcc not to use zstd when
the feature is disabled.
Amends d20c980576
Change-Id: I9dc55b59b1be5272b79aa5f1e2daf2b516a157d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The minimum required CMake version to build Qt on any platform is
3.16.0 at the moment. That's the first version that ships the
implementation-specific AutogenInfo.json files, which we parse
to implement the Qt moc --collect-json functionality.
Change-Id: I6160cd74fa228aa330f4c1e512ffb766afc5f8a3
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The only two uses (QtHarfbuzz and QtDoubleConversion) have been removed,
so now the code is not needed anymore.
Change-Id: Id9ef628fa139f1431395bcdd1705463dfafb1051
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We recomputed INSTALL_LIBDIR for every new repo that is configured,
which is incorrect due losing any custom provided libdir when
configuring qtbase.
Save that information (and all other path components) in
QtBuildInternalsConfigExtra.cmake.
Make sure not to-recompute that information when configuring a project
other than QtBase.
Allow providing absolute paths instead of relative paths for these
variables.
Note that only absolute paths pointing somewhere under
the prefix will currently work, otherwise configuraion will fail. If
we need to support such a use case, we'll have to carefully check all
code that use these path components to make sure they handle absolute
paths correctly (current assumption is relative paths everywhere).
Use the computed paths when generating the qconfig.cpp file which is
used for qmake -query.
Task-number: QTBUG-81289
Change-Id: I331aa00e47988fe0ee4e533b5f95c4df11c4d96f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Teaches configurejson2cmake about summaries / reports, so things
like enabled features, configure sections, notes, etc.
Add relevant CMake API for adding summary sections and entries,
as well as configure reports. The commands record the passed data,
and the data is later evaluated when the summary needs to be printed.
This is needed, to ensure that all features are evaluated by the
time the summary is printed.
Some report and summary entries are not generated if they mention a
feature that is explicitly exclduded by configurejson2cmake's feature
mapping dictionary. This is to prevent CMake from failing at configure
time when trying to evaluate an unknown feature. We should re-enable
these in the future.
A few custom report types are skipped by configurejson2cmake (like
values of qmake CONFIG or buildParts).
These will have to be addressed a case-by-case basis if still needed.
Change-Id: I95d74ce34734d347681905f15a781f64b5bd5edc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Same value as QMAKE_IOS_DEPLOYMENT_TARGET in
mkspecs/macx-ios-clang/qmake.conf, etc.
Change-Id: I1f6a07d73c2126d0286e8d26f7e61a690607c8ce
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
For this, we have to uninline the separate_debug_info configure test,
because supporting the conversion of this in configurejson2cmake is not
worth the hassle.
Separate debug information can be turned on for a target by calling the
function qt_enable_separate_debug_info. For Qt's shared libraries and
tools separate debug information is generated if the
'separate_debug_info' feature is manually turned on.
Change-Id: Ic2ffc15efef3794dc0aa42f3d853ef6d651a751c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Depends on a new bleeding edge feature in as-of-yet unreleased
CMake 3.18, that allows building macOS frameworks using the
Ninja Multi-Config generator targeting more than
one configuration.
It uses the new CMAKE_FRAMEWORK_MULTI_CONFIG_POSTFIX_DEBUG
property which tells CMake to create properly named debug artifacts
in the Multi-Config ninja file.
Without it, both debug and release artifacts would have the same
location (no _debug) postfix, so it would be unclear which file
ends up being compiled as last (the debug or release variant).
Change-Id: I3e10832551731a18317da8f9667d96cec3dc3028
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a Qt module has this property set, when we generate the
QtModuleDepends header file and find this module it will not be added.
This is required to be able to create a Core_qobject module, as it does
not have any headers.
Change-Id: Iaea1080919d05ace12e48693e02d8c0f4c669339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the FindWrap modules checked for hardcoded features
when deciding whether to use a bundled library or not. This proved
not to work correctly because features were not available when
the find modules were processed.
Introduce a new CMake API call that needs to be manually called
after an add_subdirectory call which declares a bundled library.
The call will check for the existence of the bundled target, and will
then set a cache variable QT_USE_BUNDLED_Bundled<TargetName>.
The same variable is written into a FindWrapFooConfigExtra.cmake file
which will be loaded by the appropriate FindWrap module. The module
can that use that variable to decided whether to link against the
bundled library or the system library.
Change-Id: I75e9a4f4e14d88d4490916a79ad12f1ce57891e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This feature is read-only. It's controlled by the multi-config feature
of CMake. It mainly exists for the qmake support.
Change-Id: I322459598fe92568eda4d42319ded444537e95d4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Most of the NMC-specific variables were renamed to be more general.
Change-Id: I8ee2874fecb9e57480ce51db9183c6cf3dd100af
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
And in order to do this we must teach qt_config_compile_test a
COMPILE_OPTIONS argument.
Change-Id: I66fa45142b544e3a2fc599af1c1a4c69b442b318
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The original toolchain file may set CMAKE_FIND_ROOT_PATH instead of
appending it, which overrides the Qt's path.
Change-Id: I69a4bf4be6a999854bb8a84cf5032c6a9b739b2e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add support to generate win32 resources files through CMake. The
functionality is implemented via qt6_generate_win32_rc_file() in
Qt6CoreMacros.cmake.
Currently qt_add_test(), qt_add_module() and add_qt_gui_executable()
call the above function when building on windows. The function itself
has been written as part of the public API so it can be called from
other locations if required.
Change-Id: Id5388b3bf9a2068b36780d8268306326f990778c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds missing linker flags for MSVC in order to match
qmake's msvc-desktop.conf.
Change-Id: Ieb1206dae4517e8d9f36175f8fcebccd30e52d01
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As reduce-relocations implies bsymbolic_functions, we also add the
-Bsymbolic-functions linker flag.
Also, handle the .dynlist files that are passed to the linker by
bsymbolic_functions.prf in the qmake build.
Change-Id: I535c33fba888596d2f8975b16864bbe9f0a7caa4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A few things are needed to accomplish that:
- the python scripts do not ignore certain system_foo features anymore
(it is a hardcoded list for now just to be safe)
- configurejson2cmake now outputs
qt_find_package(WrapSystemFoo) calls for bundled libraries
(see below)
- the harfbuzz .pro file is modified to accommodate pro2cmake
not being able to correctly parse some conditional scopes
- the freetype .pro file is modified to make sure linking of the
library succeeds without duplicate symbol errors, which qmake
doesn't encounter due to magical exclusion of cpp files that are
included in other cpp files (presumably for include moc_foo.cpp
support)
- feature evaluation for Core, Gui, Network now happens in the
qtbase/src directory, so that bundled libraries can be conditionally
built
- for each bundled library there are now two FindWrap scripts:
- FindWrapSystemFoo which finds an installed library in the system
- FindWrapFoo which either uses the system installed library or
the built bundled one depending on a condition
- projects that intend to use bundled libraries need to link against
WrapFoo::WrapFoo instead of WrapSystemFoo::WrapSystemFoo targets
(this is handled by pro2cmake).
Unfortunately manually added qt_find_package(WrapFoo) calls might
still be needed as is the case for WrapFreetype and others.
- a new cmake/QtFindWrapHelper.cmake file is added that provides
a macro to simplify creation of WrapFoo targets that link against
a bundled or system library. The implementation is fairly ugly
due to CMake macro constraints, but it was deemed better than
copy-pasting a bunch of almost identical code across all
FindWrapFoo.cmake files.
- a qtzlib header-only module is now created when using bundled
zlib, to provide public syncqt created headers for consumers
that need them. These are projects that have
'QT_PRIVATE += zlib-private' in their .pro files
(e.g. qtimageformats, qtlocation, qt3d, etc.)
This is unfortunately needed due to QtNetwork using zlib
types in its private C++ API.
The change includes support for building the following bundled
libraries:
- zlib
- libpng
- libjpeg
- Freetype
- Harfbuzz-ng
- PCRE2
The following 3rd party libraries are still using an old
implementation within the CMake build system, and should be migrated
to the new one in the near future:
- double-conversion
- Old harfbuzz
The are a few libraries that are not yet ported:
- system-sqlite
- systemxcb
- maybe others
Among other things, this change allows building qtbase on Windows
without requiring vcpkg.
Task-number: QTBUG-82167
Change-Id: I35ecea0d832f66c1943c82e618de4a51440971a5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Only existing directory paths should be added to
INTERFACE_INCLUDE_DIRECTORIES, otherwise projects fail to configure.
If after running syncqt there is no private headers directory created
(due to the module not having any _p.h files), such a path should not
be added as an interface include path.
This fixes consumers of QtZlib, where there are no private headers.
Change-Id: I3fd1a7b5eb8f816d178d6d91223baa6f377e6f9f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Introduce an internal qt_feature_evaluate_features() function
which takes a list of configure.cmake paths, and evaluates the
features declared in those files, thus setting a bunch of cache
variables.
This is required to implement the equivalent of what qtbase/src.pro
does, which includes the feature .pri files to decide whether
bundled 3rd party libraries need to be built.
Change-Id: I5552f488671c001eb3f204245b905ab981017a9f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
On Windows, when WrapRt is qt_find_pacakge()'d the first time, the
result is "not found", whereas a second time it would claim that the
package is found.
This is due to the WrapRt target being always created even if it has
no transitive dependencies, and thus a second search would check only
for the existence of the target.
Fix the module to only create the target if the relevant library
is found.
Change-Id: I5c838cbfbafb4029f96da815a0f72e4a8e6716b0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Libraries created with qt_add_3rdparty_library should be installed
when the qmake 'installed' value is set in CONFIG. Introduce a new
INSTALL option to handle that in CMake projects.
If the value is provided, the library should always be installed
regardless of whether it's a shared or static library.
Fix the libraries to be installed to BINDIR/LIBDIR instead of
the config install dir.
Also install the CMake config files into the config install dir.
Change-Id: I86f1ef47680f08669a77db77e0d986f47d5fae2d
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Useful for header only modules that are declared in the same directory
as a regular module, but which doesn't have any features and thus has
no qtfoo-config.h file.
Will be used for the qtzlib module, which is built when system_zlib
feature is disabled.
Change-Id: I60c5f73c3e2a3a481a16c5872e06d5d109a04b10
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The QT_COMPILE_OPTIONS_WARNINGS_OFF property can be set on targets
in order to disable adding the default compiler warnings flags.
This is useful when building 3rd party library code.
Change-Id: I9f58ca4543b5ea0d2051b7f94f0042d24c4e3a16
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A future change will come that sets it for iOS and friends.
Change-Id: I74b688ee62d24137e3cdf5475e1a9e858698ccf0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a couple of missing compile flags that are defined in
mkspecs/common/msvc-version.conf and mkspecs/common/msvc-desktop.conf
that were not yet ported to CMake.
Change-Id: I9ef0ef71cb0c063699fba4c067e90f6515169baf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Prior to this patch QT_NO_DEBUG would not be correctly set for
generators which support multiple configurations such as Visual Studio
and XCode.
This patch also applies the define to all executables, which was
previously missing.
Change-Id: I16a911d15217a62093c68ba2b4c2545cdb8df1e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch fixes setting the correct value for the PATH
environment value. Currently, due to Windows' ; path
separator, every list entry was treated as a separate
environment variable that need to be set instead of
properly extending the PATH list.
Change-Id: Ib2fc031397459370beec84f9cb4ec6df7db00df3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If we install tests data for non-prefix builds it can cause tests to
fail as they find the data in the wrong location. An example of this is
tst_qsslkey.
Change-Id: I55bd2ff4cb5a0857dc857cb2149ffe4436ec6f99
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If qt_add_test() is called with OUTPUT_DIRECTORY and no
WORKING_DIRECTORY is specified, default the WORKING_DIRECTORY to the
same value as OUTPUT_DIRECTORY._
Change-Id: If373fe590508ad58d4632e0598cd0d9dddb2ae16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This replicates the behavior of QMAKE_MACOSX_DEPLOYMENT_TARGET in
qmake.
Change-Id: I273cd26994f2edfc52dc7b6278252c37b65b2356
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before the patch we set the standard flags in two places:
- once when building qtbase
- and always when including QtSetup (for every repo that is built)
This change makes sure to also set the correct standards flag when
building standalone tests, because QtSetup is called to early in
that case.
Change-Id: Iad130b731e9eb9605bb91637364c33fdd49ce3cb
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Need to pass additional -Zc:__cplusplus flag when using
MSVC, so that the __cplusplus define has correct values.
Additionally make the option be propagated to consumers of Qt
via the public Platform target, which QtCore links against.
Change-Id: Ie1283c25334b93f993529beb7fb32bdb001627f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
Hardcoding 'doc' causes issues when installing qtbase but also
when trying to build the other modules documentation.
Change-Id: I5c57852add59d0dc0d067813feea0bbb0962c84b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add qt_add_3rdparty_library() function as a replacement for qmake's
qt_helper_lib feature.
All 3rdparty libraries will be available under the Qt:: alias when built
through this method so that they can properly register as dependencies
of a Qt module.
This patch also adds Qt3rdPartyLibraryConfig.cmake.in to export the
CMake configuration for static builds and shared libraries.
Change-Id: I52bf3a95ca22fccd9ab54343468847bb1b570c28
Fixes: QTBUG-81969
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unless we are building under a static library configuration there is no
reason to export the dependency on private libraries.
Change-Id: I724da38495dc55cc2783d4b19c01533fc0900d22
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Every metatypes.json files is now added as an INTERFACE source file to a
target. This enables us later to correctly collect all the
metatypes.json files from dependent targets. This information is also
correctly exported via export()/install().
To avoid the metatypes.json appearing in every target's source list,
the file path is wrapped in a generator expression which will only be
evaluated when the consuming target has the property
QT_CONSUMES_METATYPES set to true. At the moment this is limited to
targets which need to interact with qmltyperegistrar.
Change-Id: I0ffebcd069a923383f7ed11cde2c94ecf2fb13f3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a module has the NO_MODULE_HEADERS option, we should not add
the private module header paths to the BUILD_INTERFACE of private
modules.
This fixes building static non-prefix qtdeclarative builds on Linux,
where non-existent QtXcbQpa headers failed the qtdeclarative
generation step.
Change-Id: Ic9fdd8c5688d3449576eb8a5dd852c252e29bf5b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This bit is being move to QtDeclarative as it is not required to build
QtBase.
Change-Id: I7b559b8b0e33e66d92c97c93bc43b650e7150237
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch enables each module to load their own
Qt${version}ModuleBuildInternals.cmake to expose module specific
features when building Qt.
These scripts are only loaded when the package QtBuildInternals has been
loaded.
Change-Id: Ie58dd93ddd292cf106fe7ef147151a51fd5aa2b1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Always set the installation directory for Qml modules as it is required
for qt6_add_qml_module() to set the correct properties so that qml files
can be copied to the right location.
This patch also fixes the copy of qmldir. As it previously stood, the
copied file was not complete as it is possible fore the contents to
change after we exit this function.
Change-Id: I974269cf0507664b005a93bf27ab19941d99f1d6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt6_generate_meta_types_json_file() has been extended to allow the
generated moc_....cpp.json files to be manually specified. This now
enabled the metatype generation to be used without resorting to AUTOMOC.
Additionally, Core_qobject declaration order has been temporarily moved
as it otherwise does not produce the correct metatypes dependency file
for Core. This will be fixed in a follow up patch.
Change-Id: I3266ab3073db478458a0c1dbc8b9fbab16622a64
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a module project (Quick) contains QT += core-private, the
qmake semantics translated to CMake would mean the following:
target_link_libraries(Quick PUBLIC Core)
target_link_libraries(Quick PRIVATE CorePrivate)
target_link_libraries(QuickPrivate INTERFACE CorePrivate)
Whereas a QT_PRIVATE += core-private only means
target_link_libraries(Quick PRIVATE CorePrivate)
without adding any public dependencies to QuickPrivate.
To achieve that, we need a few modifications to both pro2cmake and
QtBuild.cmake
- pro2cmake doesn't automagically add public and private dependencies
to targets when encountering a private module assigned to QT.
Instead it generates the logic described above by passing correct
LIBRARIES, PUBLIC_LIBRARIES, and PRIVATE_MODULE_INTERFACE values.
- pro2cmake doesn't do any dependency magic for non-module targets
anymore, like executables, plugins, internal_modules. This means
that QT assignments are now regular public dependencies.
- qt_add_module and qt_extend_target now accept a new
PRIVATE_MODULE_INTERFACE option.
- qt_extend_target does not automagically make private modules be
public dependencies on other private modules.
- qt_extend_target correctly assigns PRIVATE_MODULE_INTERFACE values
to Private module only. For other target types, it's a no-op.
The change requires regeneration of all projects.
When we fix pro2cmake and QtBuild.cmake to properly handle
internal_modules (create only Private modules without creating
a non-Private counter part), we will need another project regeneration
to correctly assign dependencies.
Change-Id: I4c21f26b3ef3b2a4ed208b58bccb65a5b7312f81
Task-number: QTBUG-81780
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tegra has drm.h header in include/drm instead of include/libdrm
Both paths are defined in libdrm.pc, but those are not used since this
cmake file searches only for xf86drm.h.
Change-Id: If1e979c7d5aec520b18eed5b3fcbb5ac2e15cc62
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use syncqt.pl from QT_HOST_PATH if that is given, since qtbase
sources might not be available and CMAKE_INSTALL_PREFIX doesn't
check for sysroot.
Change-Id: I165b17a5a02fd4dbb2340bf69a641b8aaab8fabd
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove retained file feature as the expected behavior now is for the
compiled file to be retained by default.
Change-Id: I5a791a182825b223eb4497970fbb1c47c70135cc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If we don't add the executable used by the custom_target and/or
custom_command to list of the command's/target's dependencies
(DEPENDS) the generated file will not update should the executable
change.
Change-Id: Idce30f3dd4f756d9e8f6848c5e16f5dd6c7c8f0a
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Hardcoding "lib" caused build issues and wrong
INTERFACE_INCLUDE_DIRECTORIES paths in generated CMake configuration
files if INSTALL_INCLUDEDIR pointed to a different location.
Contributes to QTBUG-81289
Change-Id: I3276ecbb4bf5df1c0b4c496c0287b4a69586d683
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INSTALL_LIBDIR may point to a different directory than "lib".
Contributes to QTBUG-81289
Change-Id: Ia8220515e3ee3703539aa28655e6c806736615ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INSTALL_BINDIR may point to a different location than "bin". In order
to avoid errors when trying to install qtbase, "bin" is replaced with
"INSTALL_BINDIR" where necessary.
Contributes to QTBUG-81289
Change-Id: I1d4f9fb2617547c9b0e44d6690caebb2b6768e2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Linux distributions may want to install mkspecs files into a
different subdir in order to make Qt6 co-installable with
older versions.
Contributes to QTBUG-81289
Change-Id: Ie4a64370d742948d5ca4f2eaed6ea550d2676707
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Christophe Giboudeaux <christophe@krop.fr>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise CMake sets an up an empty default value itself, and then
the value in QtBuildInternalsExtra does not end up being used, and
then QtSetup ends up setting a Debug value.
Amends 34a112e383
Change-Id: If97a1d8c19ad5e7f690283997ff80dd9588cd521
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Due to generator expression it is impossible to recursively evaluate the
link dependencies of a target. This is required by QtDeclarative's
qmltyperegistrar.
To overcome this we generate a ${target}_metatypes_dep.txt file which
contain lines with the following pattern:
${PATH_TO_METATYPES.json}=${PATH_TO_METATYPES_DEP.txt}
This can be used to recursively evaluate the dependencies at run time.
Change-Id: Ia4cee0632c16ba9631e0289db906fe9d320844a3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Rather than pass the build type in the wrapper, make sure the build
type is a cache var, so it gets picked up when building other repos.
This reverts commit f72ca4cf85.
Change-Id: I5d91ab66249b6c40c5e548b0eec0e467ba0f2ebc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If the OUTPUT_NAME of a plugin is the same as the CMake target name,
don't try to create a custom target with the same name. That will
cause configuration errors due to duplicate targets.
Amends f67d8ae2d4
Change-Id: Iaea7c68e22dbc1e345ba10950c312618abba4c21
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Qt 5, qmake generates CMake Config files which expose the plugins
as imported libraries. The name of these libraries are derived from
the plugin class name. So QCocoaIntegrationPlugin, and not qcocoa.
To keep compatibility between Qt5 and Qt6 CMake target names,
the pro2cmake script should generate plugin target names based on the
plugin class names.
To avoid passing the same name in qt_add_plugin (target and CLASS_NAME),
derive the class name from the target if the class name is
not explicitly specified.
Also add a new OUTPUT_NAME parameter which is used to change the
final file name of the plugin, so that it's compatible with Qt5.
For example to generate a qcocoa.dylib file, instead of
QCocoaIntegrationPlugin.dylib file.
The same OUTPUT_NAME value will be used for generation of plugin .prl
files for qmake consumption.
Change-Id: I4d53e680d7beb62befecd359cdf6bba60a34ff0d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This allows doing debug_and_release builds with Ninja on all
platforms.
The "Ninja Multi-Config generator" is available starting with CMake
3.17.
Desired configurations can be set via CMAKE_CONFIGURATION_TYPES.
Possible values: "Release, Debug, RelWithDebInfo, MinRelSize".
For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug".
The first configuration is the 'default' configuration which is
built when calling ninja with no arguments.
To build all targets of a certain configuration use "ninja all:Release"
or "ninja all:Debug".
To build all targets in all configurations use "ninja all:all".
Note that the first configuration influences which configuration of
tools will be used when building the libraries for all configurations.
In simple terms, when configured with
-DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc
is used by AUTOMOC.
When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release"
the debug version of moc is used by AUTOMOC.
Framework builds and Ninja Multi-Config don't currently work together
due to multiple bugs in CMake, which ends up generating an invalid ninja
file with duplicate rules. There are also issues with placement of the
debug artifacts.
This will be handled in a follow up patch after CMake is fixed.
Task-number: QTBUG-76899
Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This manifested in Coin when ninja tried to build qdrawhelper_sse2.cpp
before the Core framework headers were copied, resulting in a
fatal error: 'qatomic.h' file not found.
Make sure every SIMD object library has all PRIVATE dependencies of
its parent library PRIVATE dependencies (except for other SIMD object
libraries), to make sure that the framework headers are copied by the
time the SIMD source file is compiled.
Here's an example for clarification. Gui_simd_sse2's LINK_LIBRARIES
property should have all the values of Gui's LINK_LIBRARIES property
(like Qt::Core) filtering out all SIMD object library targets (
like Gui_simd_sse2, Gui_simd_sse3, etc).
Thus we make sure the SIMD object libraries are built after Gui's
dependencies are built.
Note that using INTERFACE_LINK_LIBRARIES to avoid the filtering of SIMD
targets in the generator expression would only work in shared Qt builds.
In static Qt builds where PRIVATE dependencies become PUBLIC, CMake would
insert $<LINK_ONLY:Gui_simd_foo> entries in INTERFACE_LINK_LIBRARIES
which causes CMake to be confused and fail at generation time.
Change-Id: I246c1394b9c9830c0ebd11e6621e56b992a6a1f2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When running tests with CMake's CTest, set the environment
QT_TEST_RUNNING_IN_CTEST to 1. This can be useful to deal with tests
that do not properly work when running from CTest.
For instance, the qmake test in this patch has one test that only works
when not run from CTest.
Change-Id: I01eea9131de69c18118a9ed9f96e9296d5ea20f1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Framework builds are enabled by default on macOS.
They are controlled via the framework feature.
Task-number: QTBUG-75751
Change-Id: I00bc64672f02bbd1672508b2b5010d202984a961
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Adds custom targets which take care of generating and installing
documentation files.
Every module has a global set of targets suffixed with the module
name in order for them to be unique when we implement super builds.
The targets are the same as the list below, but replace ${target}
with the module's name. Eg.: docs_qtbase.
For every target which has an qt_add_docs() call, we now create the
following set of custom targets:
* docs_${target}
* html_docs_${target}
* qch_docs_${target}
* prepare_docs_${target}
* generate_docs_${target}
* install_docs_${target}
* install_html_docs_${target}
* install_qch_docs_${target}
Fixes: QTBUG-75859
Change-Id: Ie84cb9a2dedbe7333d9a84f4d73383442deca477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Iba5104cccdc613f7b2cf0d1454209578adaac824
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Mention location of the configure.cmake
- Specify the path to the conversion scripts
Change-Id: Ia6e13a1f4d2c29f2fbaf35acdd70ab16c7175d37
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We can't use qt_internal_export_modern_cmake_config_targets_file for
executables like tools, because it's not possible to use
INTERFACE_LINK_LIBRARIES with executables like you can with libraries.
We also can't create aliases to non-global imported targets.
Instead create new imported executable targets, fish out the imported
location, and assign it to the versionless targets.
Task-number: QTBUG-74137
Task-number: QTBUG-80477
Task-number: QTBUG-75984
Change-Id: I6a3c9c67ef4699c72a6c9a627c63158dfd6557f8
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise if you configured a commit that has tool A, and the switch
to a commit where tool A does not exist anymore, reconfiguration
will fail.
Change-Id: Ibb244b9630a6f4fecd27d51ce28eceff07ba8666
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a new bootstrap tool which will read CMake's
AutoGenInfo.json and ParseCache.txt to determine what the current
list of json files is that needs to be passed to moc --collect-json
option.
Right now this is enabled for qt_add_module() with the option
GENERATE_METATYPES. pro2cmake has also been updated to detect qmake's
CONFIG += metatypes and to generate the above option for modules.
The implementation lives in Qt6CoreMacros so it can eventually be used
in the public facing apis.
The generated meta types file is saved under the target property
QT_MODULE_META_TYPES_FILE.
Change-Id: I03709c662be81dd0912d0068c23ee2507bfe4383
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed when building Qt Creator with CMake + Qt6 non-prefix build.
Specifically qttools's QtUiPlugin does not have any private headers,
but the non-existing include path was exported, which caused an error
when configuring Qt Creator.
Change-Id: I662bc502fe3134fba083bde273b7f63fe1470277
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before we only exported features that had outputType PUBLIC or PRIVATE
on the various "QT_ENABLED_PUBLIC_FEATURES" target properties.
Now we also export features that have output type privateConfig,
publicConfig and publicQtConfig.
The new properties names are:
- QT_QMAKE_PUBLIC_CONFIG for outputType == publicConfig
- QT_QMAKE_PRIVATE_CONFIG for outputType == privateConfig
- QT_QMAKE_PUBLIC_QT_CONFIG for outputType == publicQtConfig
These need to be exported for 2 reasons:
- other modules that need to check the config values
- in preparation for generating proper qmake .prl and .pri
information for each module
Note that the config values are now considered actual features
when doing condition evaluation. So if there exists a feature "ssse3"
with outputType privateConfig, its enabled state can be checked via
QT_FEATURE_ssse3 in consuming modules (but not in the declaring
module).
These config values are also placed in the respective
QT_ENABLED_PUBLIC_FEATURES, QT_ENABLED_PRIVATE_FEATURES properties
when exporting a target, so the properties will now contain both
features and config values.
In order to make this work, feature name normalization has to happen
at CMake time, rather than done by the python script.
This means that features like "developer-build" need to retain the
dash in the qt_feature(), qt_feature_definition() and
qt_feature_config() calls, rather than generating "developer_build"
as the script did before.
The normalization is done at CMake time. Feature conditions,
CMake code, and -DFEATURE_foo=bar options passed on the command line
should still use the underscore version, but the original name is used
for the QT_QMAKE_PUBLIC_CONFIG properties.
Note that "c++11" like features are normalized to "cxx11".
Implementation wise, the configurejson2cmake script is adjusted to
parse these new output types.
Also QtBuild and QtFeature are adjusted to save the config values
in properties, and re-export them from GlobalConfig to Core.
Task-number: QTBUG-75666
Task-number: QTBUG-78178
Change-Id: Ibd4b152e372bdf2d09ed117644f2f2ac53ec5e75
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Inside qt_config_compile_test we use two different calls:
check_cxx_source_compiles when given code, and try_compile when
given a project.
The former caches its results, while the latter does not, which means
that the try_compile calls are re-executed on each reconfigure.
Do what check_cxx_source_compiles does internally, and don't rerun
the try_compile calls if the results were computed once.
Change-Id: I2691ff08b7bb46c3fa60bbf5ed6278731c9b8e21
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the qtwayland repo, both WaylandClient and WaylandCompositor
packages need access to the qtwaylandscanner tool. That means
that the add_qt_tool(qtwaylandscanner) can't use the TOOLS_TARGET
argument to associate a dependency with only one of the above
modules.
Instead add_qt_tool now allows specifying a non-existent module
name for the TOOLS_TARGET argument, which can be manually
depended on by other packages.
Actually, you could specify the non-existent module before as
well, but that didn't do everything that had to be done.
This required a bit of refactoring in how the Dependencies file
for Tools packages is created. Now the file is created in
qt_export_tools.
Two new functions were also added to allow recording additional
dependencies between packages.
Also some bug fixes were done to make it all work. Specifically
the _FOUND variable generated in the Dependencies file was incorrect.
Also there are some quotes missing when appending extra package
dependencies via the QT_EXTRA_PACKAGE_DEPENDENCIES property.
Change-Id: I167efec16dff8d036e191df3572ea72764e22bc5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Apparently we didn't have a wrap find module for it before. Add one,
and add special support to handle a Gentoo broken Config file which is
exported by an autotools build of harbuzz.
Change-Id: I83cbeb817caf2610104c16713d4eac6ab6f8c63b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Instead of hardcoding which platforms and which compilers support
certain linker features, do the proper probing via
check_cxx_source_compiles.
Change-Id: I676010970d8f3a8f2a8340c5d15dfcef76fe9191
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clang doesn't have a mkspec just a win32-clang, there is
win32-clang-g++ and win32-clang-msvc.
Change-Id: Iff521e955559dfb2308e377b41e86b3f62c42e70
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In qtwayland, there were a bunch of warnings of the following type
when configuring:
"The plug-in 'f' does not belong to any Qt module".
This happened because the plugin type had underscores, and was not
sanitized when comparing a the plugin type of plugin.
Add a function to do the sanitization, and use it everywhere.
Change-Id: I728b5f1e18fa5f8876c4a57dbd4e33148cb242d5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Rename internal APIs like extend_target to qt_extend_target.
Prefix apis with qt_ where required.
Keep old names for compatibility until all their usages are removed.
Change-Id: I9a13515a01857257a4c5be3a89253749d46a4f41
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some repos like qtimageformats don't generate a config file for
standalone tests because the repo creates no modules.
Amends de3a806def
Change-Id: Id42338804605a883f975feb5dd81eda5acc6e687
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unfortunately not all repositories are marked as warning_clean
in their .qmake.conf files. For instance qtconnectivity and
qttools are not warning clean. Therefore we need to skip
warnings_are_errors flags on all targets created in that repository.
Add support for skipping the warnings are errors flags, by setting
a QT_SKIP_WARNINGS_ARE_ERRORS property on a target, and use that
within a generator expression with all the accumulated flags.
To mimic behavior of qmake, and set the property on all targets
created by add_qt_module, add_qt_plugin, etc, one simply needs
to set the QT_REPO_NOT_WARNINGS_CLEAN variable in the
repo project CMakeLists.txt.
Change-Id: Ib5a487af6601ae1519a0988a89f8083f94f92267
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds add_qt_manual_test() which is a simple wrapper around
add_qt_executable() which does not build under ${CMAKE_BUILD_DIR}/bin
or install the targets.
This could potentially be used later to tag manual tests.
Change-Id: Ic4e0a1d133009f5a858b9394347a0996cf42683f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring qtx11extras on macOS, we ended up installing the
file, which made Coin think that at least one module was built,
and thus it tried to build tests as well.
Don't install the file if no modules were built, thus preventing
from trying to build tests in Coin.
Amends de3a806def
Change-Id: I920a0b40a6ded12140f251352da53b68eef6560d
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In gui's CMakeLists.txt we have
if (NOT ANDROID)
...
add_qt_simd_part(Gui SIMD neon SOURCES ...)
...
endif()
and later
if(UNIX AND NOT ANDROID AND NOT APPLE_UIKIT AND NOT INTEGRITY AND NOT (TEST_architecture_arch STREQUAL "arm64"))
add_qt_simd_part(Gui SIMD neon
endif()
Since add_qt_simd_part internally uses an OBJECT library to compile the
sources with different flags and then link into Gui (in this case), we
may end up with an error when add_qt_simd_part is called twice for neon,
because the constructed target (Gui_simd_neon) exists already.
We can re-use an existing target though, as the SIMD features is the
same.
Change-Id: I7a21c6e66b47e918a53fa3b1a7db9e053ecc8d87
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Every time the qtbase project was reconfigured, the list of
config tests results was appended to a cache variable which was
never reset, resulting in multiple copies of the same values
being written to QtBuildInternalsExtra.cmake.
Make sure to clean the cache variable before appending to it.
Also change the variable to be all upper-case, to be consistent
with other cache variables.
Change-Id: Ic12046730a080595e19377981a726bc330641dc1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a _nolink target is exported, instead of getting the original
namespace prefix, it gets the Qt6 prefix
(OpenSSL::OpenSSL_nolink -> Qt6::OpenSSL_nolink).
There is some special case code in Network autotests which tries
to access the former target name, which doesn't exist when building
standalone tests.
Make sure to create a Qt6:: library alias for _nolink targets during a
build (so before the library is exported), and change the Network
autotests project to use this Qt6:: namespaced library, which will
ensure it is found both in a standalone tests build and in a regular
Qt build.
Also make sure to actually call find_package to find the OpenSSL
library when building standalone tests, otherwise configuration will
fail.
Change-Id: I3da5b958e72e745a50380f8ab1644459a7c6b005
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't call qt_android_dependencies for interface libraries.
Also make sure not to set properties which don't start with
INTERFACE_ prefix.
Change-Id: I0afdffd34c9aebe0d7ac4731b57dd4d505f84570
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
It only makes sense for non-interface libraries.
Change-Id: I80ac942ed546a6ac866e827aa2026e4e6ac897b2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
The reason is that interface libraries have to have properties
prefixed with INTERFACE_ and more importantly we don't set the
property for interface libraries at the moment.
Amends d1542e8a73.
Change-Id: I86bf99995278b9086fa0e3815e10d5d54d9ea4dc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Replace condition x86 to i386 to match other platforms.
Regenerate src/gui/CMakeLists.txt
Disable SSE4 on android x86 to match qmake.
Change-Id: Ic0d330206f2d70a79d72553aa3ff0f91ff58119c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Convert benchmark executables to add_qt_benchmark().
Currently add_qt_benchmark just calls add_qt_executable() and
ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not
install.
Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks.
Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The last set would override the variable instead of appending to it,
thus QT_DISABLE_DEPRECATED_BEFORE was never set.
Change-Id: I173b91704a855fcda1f2b86172d318e3953466db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If we do not encounter the load(qt_plugin) statement in the .pro file
but we do see the entry CONFIG+=plugin, treat the target as a regular
CMake library instead of treating it as a qt_plugin by default.
Change-Id: I67ad5c865a1a5ab691a6b0d86c2db4b686aa04dd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch converts all add_executable calls when building for Android
to a module library and replaces the call to add_test() to use
the android testrunner binary.
Change-Id: I10ba5919217cdc93cc2cbbb7d13ad9d10fc5ac1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
e1fd607493 in qtbase removed the
qml1 imports enum from qlibraryinfo.cpp, qconfig.cpp, etc.
With the recent merge from dev, this was not adjusted in
qt_generate_qconfig_cpp, and thus we generated one too many strings
in qconfig.cpp, which resulted in
QLibraryInfo::location(QLibraryInfo::Qml2ImportsPath) returning
"imports" instead of "qml" subfolder, thus causing all qml modules
not being found.
Fix this by removing the extra qconfig.cpp entry, and all other
references to the location.
Change-Id: I128f667281138e2e0ef0fe1ced4af0405c532fef
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds two custom targets to generate android apks. The
targets are named ${TARGET}_prepare_apk_dir and ${TARGET}_make_apk. The
first one insures the binary is copied to the right location and the
latter invokes androiddeployqt on the apk directory.
Change-Id: I8152cef387b50ec03ee2bfd92b56910a6f22754c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use STRING type for install locations as we use them relative to the
CMAKE_INSTALL_PREFIX.
PATH type will get expanded to absolute paths by newer CMake versions,
so that breaks our logic.
Change-Id: I36be1f0378c4fb07ad8db0051d540f9d243000be
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Write out a file with some JSON data to describe a module.
This file contains information on how that module has been built.
Change-Id: I8a604692663cbb7b76b96b97124130e30b822e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Allow plugins to be built with undefined symbols when
ALLOW_UNDEFINED_SYMBOLS is specified.
Change-Id: I6bc809e3e5257302157bf8484f850d8319674a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename the builtin test data resource name to something more unique as
there are name clashes when building tests which also add a resource
named 'testdata'.
Change-Id: Icc1bbff3134e1dbc6ea4f6a87a1715b936c723cc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add support to pro2cmake to convert java code for android.
Add support to override API_LEVEL for the Android sdk jar file. If the
sdk is not found, we'll default to the one located by QT_ANDROID_JAR.
Change-Id: If0b746dc7f9148ac43e6592a4a4dd23d46bbd4cd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This maps the behavior of mkspecs/features/qt_common.prf and enables the
use of C++17 for example in Android, where the toolchain supports it
anyway.
Change-Id: I41f4bdb160a3929e2fb78f36efb1ad5f2ad391a5
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We cannot use a generator expression in an if statement, it does not
work. Instead, we could inspect the CMAKE_C/CXX_COMPILE_FEATURES list,
but unfortunately that's not reliable. For example it detects that ICPC
supports C++17 when in fact that depends on the installed libstdc++.
Therefore this patch revives our own configure tests.
Change-Id: Ic3bc5762fbe81837722523e3881ac16e84628519
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Latest CMake will try to compile the given precompiled headers
as C files, due to enabling the C language in the project + also
having c files.
Make sure to wrap the precompiled headers in a CXX language only
generator expression.
For details, see https://gitlab.kitware.com/cmake/cmake/issues/19839
Change-Id: Ib3508ad920092455c300b1a566ba6152bab032db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In the plugin test in QtBase we have a scenario where we have target
binaries that are inputs to add_qt_resource(). If we do not remove these
files from the dependency list for add_custom_command() cmake will
fail to generate the build files.
If we mark them as generated source files, we'd have to add a special
rule to generate them. Furthermore, using $<TARGET_FILE:...> does not
work due processing done by add_qt_resource.
To bypass this we check whether the property is set and instead of
adding the file to the dependency list we add the target referenced
in that property. RCC will still work as expected but will fail if the
files aren't present.
Change-Id: I16855a54f5606d6fe27ab1347ed7ff4f40392c98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OUTPUT_DIRECTORY by itself is not a valid cmake target property.
Change-Id: Ic3a2a81b8b982ad7ccf0551000a157f9a4d3ef22
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Note the following bigger things that had to be done:
Handle GSS library / feature with a new custom find module.
Implement rudimentary support for relocatability (does not currently
handle extprefix).
Change-Id: Ic6cd27dda7ebca9829f51cb42ea76fff6d1767ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If a module is marked as NO_MODULE_HEADERS, we shouldn't
try to include the non-existing include directory which is
usually generated by syncqt.
Note it seems that NO_SYNC_QT and NO_MODULE_HEADERS seems
to converge, so it might make sense to merge them in the future.
Change-Id: Iab4e2907ed68776632337b37496b015535da8784
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generated plugin CMake files should always try to call
find_dependency, especially in static builds.
pkg_check_modules sets a cache value for foo_FOUND instead of
a directory scope foo_FOUND, which means that find_dependency
will not be called in another scope, and thus fail to create
needed imported targets.
Note this makes the code be the same as in
ModuleDependencies.cmake.in.
Change-Id: I0b58b038afcb72cb27d0b433371bc9cb5e4bfec9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add condition replacements for the android ABIs.
Add a replacement for QT_ARCH to ANDROID_ABI, since QT_ARCH is only used
with the android build for now.
Change-Id: I553d7910546de32236f723ec2e9a05a18da76130
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
extend_target() does not handle the OUTPUT_DIRECTORY argument, so we
must handle it ourselves.
Change-Id: I31880a516ae185f3255b2a51f41d61ee6b1d9838
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's probably best to make it follow the usual calling convention that
the associated (consuming) target is the first parameter of the
function. So first this change accepts both formats.
Change-Id: I1f20706b23d5e819e0eb689eecedb3afb49df3b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide a SKIP_INSTALL argument to add_qt_plugin for test cases with
plugins lacking install information.
Change-Id: Iddb3843fab1790d69d64686530a46057a2ff0477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add add_cmake_library to allow us to create normal cmake targets using
all the information we have collected via the conversion script.
This function is only meant for tests. For an example,
see tests/auto/corelib/plugin/qpluginloader/lib/lib.pro.
Change-Id: I738cb8ac241b8da1a1da3ef957c24dc7a754d43f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we run into a plugin that does not have a type and is not a
qml plugin, we try to see if we can find the target installation path
and provide INSTALL_DIRECTORY AND ARCHIVE_INSTALL_DIRECTORY to the
add_qt_plugin call.
We run into this frequently with the unit tests.
This patch also changes add_qt_plugin() to use the value provided in
INSTALL_DIRECTORY for ARCHIVE_INSTALL_DIRECTORY if no value is provided
for the latter.
Change-Id: I61278904a4d2d72308079cd362bd085b4e2f540c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtPlugins.cmake.in uses file(GENERATE) and target_sources() to
propagate the generated cpp files which contain plugin initialization
code to their consuming targets.
Unfortunately due to a bug in CMake, if the file is generated in a
different scope than the consuming target, the CMake generation
step will fail saying that the source file can not be found.
See https://gitlab.kitware.com/cmake/cmake/issues/18399 for details.
In the case of qtdeclarative, find_package(Qt6) is called at the top
level scope (this is when the file gets generated),
but the targets are created in subdirectory scopes, and the GENERATED
source file property is not propagated across scropes.
Circumvent the issue by instead using file(WRITE) and configure_file()
which create the file at configure time rather than generate time.
This will pollute the current binary directory with some more files,
but at least successfully fixes the build.
Change-Id: I3ab3b12dcbf6a9d0ab9ee87173e4a1952325b37b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Some work was needed to make the plug-in types,
and which plug-ins are available for each type
in client code.
Change-Id: Ib71feca31069deca3d3f54c8613054f5f8ae410c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Update add_qml_module() to use the new INSTALL_QML_FILES argument from
qt6_add_qml_module().
This patch also updates pro2cmake.py to remove the QT_QML_SOURCE_INSTALL
property from qml files.
Change-Id: I6623b2de76bb55bd6750e48f7d45c53ca536b391
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Update to match latest changes to QtDeclarative.
Change-Id: Ie455c0418e95c288149b4b1a29b065a8876e8b7e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The framework is needed for qtconnectivity.
Change-Id: I6a502564fb5543ca94ba5ae458a544286e34564c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Sometimes when writing a qt_find_package and configuring a project,
you might get the following error from CMake:
CMake Error at QtBuild.cmake (set_property)
Attempt to promote imported target "WrapFreetype::WrapFreetype" to
global scope (by setting IMPORTED_GLOBAL) which is not built in this
directory.
This means that another find_package call, found WrapFreetype
in another directory scope other than the current one, and thus the
found target cat not be made global. Sometimes that implies that the
qt_find_package might not be needed if WrapFreeType will always be
found via a transitive depdendency.
By setting QT_DEBUG_QT_FIND_PACKAGE=1 on the command line, you can
make qt_find_package skip all of its behavior if the package was
already found and the provided targets were also found.
Unfortunately this behavior can not be made the default, because there
is no way to find out in what scope the package was found, and if it's
legal to make the targets global. At least I haven't found a way to do
that yet.
Thus the opt-in QT_DEBUG_QT_FIND_PACKAGE is a means to help with
debugging such cases.
Change-Id: I04242ed0f2fd0a75bc199386d28a1a0bd92da41a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
During a static build we need to use the find modules
in 3rdparty/extra-cmake-modules/find-modules when generating a
ModuleDependencies file, so that the generated find_dependency()
calls succeed. This means that the files have to be shipped with
Qt6 package, making them pseudo public API.
There is also a need to use these files when building QtWayland.
Instead of setting / unsetting CMAKE_MODULE_PATH only in module
and plugin Dependencies cmake files, just set them once when finding
Qt6.
This will allow QtWayland and QtX11Extras to easily find the required
third party packages, without having to hardcode the paths in multiple
repos.
Change-Id: I750d0421a269e5632afa1bb62498c2501d73cdb1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At least on Ubuntu the name of the pkg config package
is libsystemd and not systemd.
This fixes libsystemd showing up as not found in the feature
summary.
Change-Id: I099a253026ca8096b9e2f348a5f35209d44acc6c
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
If the target exists or the find_package() call succeeds
we still need to set _FOUND to 1.
Change-Id: Ib2267c30580082dcc177ab21708a3bc5dbde974f
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
qt_find_package usually does 2 find_package() calls, one in CONFIG
mode and one in MODULE mode.
If the CONFIG mode doesn't find a Config file, the package_DIR cache
variable is set to NOTFOUND, and this causes the FeatureSummary
at the end to show that the package was not found, even if it is
found by the next MODULE mode find_package call.
Make sure to unset the _DIR variable in case if the Config module
call fails.
This fixes XRender showing up as not found even when it's found via
the FindXRender.cmake file.
Change-Id: I6ce39dad9cbb11836ca71f735a3267070c75b444
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Qt CMake Build Bot
This is needed because the ported over requires() clauses from qmake
to CMake are executed before qt_repo_build(), which means that all the
custom platform variables that we set (like LINUX, APPLE_OSX) need
to be available immediately after finding BuildInternals.
Change-Id: I7345b69edf72c266508846766e64f42c99862d1d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Allow setting feature defines to ON, YES, TRUE, Y, OFF, NO, FALSE, N and
non-negative numbers like it's possible for other defines.
We'll not allow IGNORE and NOTFOUND, because they're a bit strange in
the context of features.
Change-Id: I7f6cd6dff4c68972921b499b28916c9ad789d510
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
The set command looked like this:
set \"PATH=...\"
which was setting the environment variable \"PATH.
Removing the escaped double quotes makes it actually work.
Change-Id: I2c1d5d01b4415220512b005b75b7b67c695e33ae
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There's no library to link against and the headers are in the system, so
we can create a synthetic import library after verifying the
compilation.
Change-Id: I9baa32cfe06f2f48adf066d558aa69646143efd0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
If the qml files are not listed in the qmldir file they do not need
to be written again, since it is expected that they are registered
by the c++ plugin code.
Change-Id: I624aedb182583f942bf1d1a322861c47a64b5065
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
As well as SIMD tests.
Change-Id: I43318418f90a6b9736eb89f008459c7d6adac8f9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fixes were upstreamed with commit
3b0bf71a72789eb2b79310b4f67602115e347f56 in extra-cmake-modules and this
brings the file in sync.
Change-Id: Ica3a29fd091afa669f29a3e9775e637566f1cb97
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There is an issue about versionless tool target not finding
the regular targets, and that fails the configuration phase
of qtdeclarative.
Temporarily don't export the versionless targets, to get the
qt5 build going.
Change-Id: I5c7baff7f677f4a3f1f91b9e8082ba8a80f9cddd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is useful for providing private CMake API which is not part of
QtBase. Also, fix the setup files to be included when building
standalone tests. The old ${PROJECT_NAME}Setup.cmake file inclusion will
be removed once all usages are adjusted.
Prompted-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I5bc2bca7371660c00b0301e94d025a29b68d6975
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously you had to make sure to use DISABLE_TOOLS_EXPORT
in an add_qt_module call if the tools are built after the module,
as well as to manually call qt_export_tools after all associated
tools are built.
This was needlessly complex, especially for people that are porting
a repo with tools for the first time.
The tools package creation is now automatically done at QtPostProcess
step, so there is no need to use either DISABLE_TOOLS_EXPORT or
qt_export_tools() manually.
DISABLE_TOOLS_EXPORT is now a no-op, and will be removed once all repos
are updated not to use it.
Change-Id: I965b0d3a8a0cb908afae87b047083ed7bea9f02f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate appropriate qt_config_compile_test() calls for config tests
that have CMake projects. These are protected by an if(EXISTS) check
so that configuration doesn't fail for repos where the config tests
have not been ported yet.
Adjust the qt_config_compile_test() function to use try_compile for
projects specified via new PROJECT_PATH argument.
Change-Id: I83c061e384f68688a654b782fd7a9bede282d1e3
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
To build examples as part of a non-installed Qt prefix build,
not-yet-installed Config files need to be found by find_package()
calls inside example projects.
Facilitate that by propagating the CMAKE_PREFIX_PATH and
QT_EXAMPLES_CMAKE_PREFIX_PATH paths in all relevant find_package()
calls where NO_DEFAULT_PATH is used.
Also adjust the inclusion of the QtFeature.cmake file to be relative
to the qt6 directory, rather than the current list directory.
This is needed to successfully find the file when parsing a Config
file from a non-installed build directory.
Change-Id: I36031279628f1f7741d8f4d7571484a6545227f7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Otherwise we get errors like the following in non-gui projects:
Error evaluating generator expression:
$<TARGET_FILE:Qt6::uic>
No target "Qt6::uic"
Change-Id: I8a3a6f8ec5e5c1c3d1f73369c5739a321c64bfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt6_add_resources already supported the OPTIONS multi value parameter,
but only for the non-target case. Use the same parameter for the target
case.
Change-Id: Ib5fcb976ecbac244c3b11073b3cdd0c5c6366a87
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
This clarifies the weird pause when configuring, right after
the HAVE_reduce_relocations test.
Change-Id: I0edcbbd085286c20c4eaea8d8e15a509ec93d85f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some tests are changing headers using defines inside the tests.
Let's more closely mirror what qmake does to fix this. And it will also
save quite a lot of space since most tests don't include all of
e.g. QtCore
Change-Id: I6f7e530f922418944d690bd2a1ee5f459ba755e1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Store generated qrc, cpp and qmlcachegen file from invocations of
add_qt_resource/qt6_add_resources/qt6_process_resources under .rcc
in the target's binary directory.
Change-Id: I844f97acfabe6b54db85e7a7a0c9c25694452bd3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Extend the example writing section to handle qml plugins. Detection
is based on whether the plugin config is detected an the target links
against Qml.
add_qt_qml_module() now uses the the public facing API underneath.
Change-Id: I2ccd06548e7b5b18c9dc3338b835bc115fa97809
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In an extreme case where /bin/syncqt.pl does exists,
is better to check if the QtBase_SOURCE_DIR is not empty
to avoid a mismatch script version that is being used.
Change-Id: Ia5694eadc5517998b827eccf70bdf6f3c14ebfa3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Incorrect variable name was being used to set the target in the parent
scope.
Change-Id: I73ea644ebf94c9b9a62b34b1ad493e488729ff2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the future need will need to continue to tie qdoc runs still to
targets, just like with qmake. This change prepares us for that by
ensuring that add_docs takes two parameters and that any re-generated
CMakeLists.txt from now on gets it right.
Change-Id: Id0256dc1e2f2f59f3b4e4ca98f0d10d025d189fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is similar to how we show the instructions when configuring
in qmake land.
Change-Id: Iabd28acc3d74fd0175eab812a412744dac89e6f6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By adding the path to the DLLs early on in the path. This fixes the
issue seen in CI (0xc0000135, DLL not found) and resolves local issues
where you might have forgotten to add this to path yourself potentially
grabbing libraries from elsewhere.
The ${path} seems to be a holdover that is no longer used, so it was
removed while the code was changed anyway.
Also disable WIN32_EXECUTABLE for all tests so that we can actually get
some output from them :)
Change-Id: Iec42c809c37be4f31c7f0a7af3a30c3528022dbe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Change-Id: I8113d7dd4e7967d020d59a5b4104e8366d55283c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Needed for qtcoap, otherwise AUTOMOC doesn't run moc
on qcoapnamespace.h.
Change-Id: I4ca43fcbbc5db6163f9f9f788b920eae86f5b174
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake, the header files used for private symbol versioning is done
via
private_api_headers = $$SYNCQT.PRIVATE_HEADER_FILES $$SYNCQT.QPA_HEADER_FILES
So we must do the same with CMake.
Change-Id: Iaebeb13592241b6c4d89f70d2e6ac3ebfb374207
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
BUILD_EXAMPLES and BUILD_TESTING are supposed to be defined via arguments
when executing cmake. The current text does not make that clear. Change
the wording, so that it matches other places in the document that explain
which cmake arguments to set when.
Change-Id: I058cf9d6bc7660c9f4820e2a7342bc64e99d6a72
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The if around the find logic meant that the module was never shown as
found after the first round.
Change-Id: I3dd47b37baf7c630c54adbce6872b99f9ff56ad0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Output target was named output_target_quick instead of just output_target
Change-Id: I3ee0598bb61e654e42cb82b84da46f292d87e2cb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Value was not being propagated to the parent scope when set.
This patch also changes OUTPUT_TARGET to OUTPUT_TARGETS since it is
possible that two targets can be generated.
Change-Id: If489a609ed363a319224fcd6c5a4fc878d0d8617
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
They're INTERFACE-type targets and can thus only have whitelisted
properties set. That fixes the cmake configure step for the UiPlugin
target in qttools.
This has the unfortunate side-effect that the headers will not be picked
up for our pre-compiled headers. Although it is not a big issue since we
don't have many header-only modules. An example is QtTools' UiPlugin.
Amends 2cf0ba1fba
Change-Id: If722928f64727ffaf2e9d0746668c0198fa1a647
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Some modules define their own manually-maintained lists, and we can rely
on the headers generated by each module to include in the pch as well
e.g. QtCore/QtCore.
There's also e.g. QtWidgetDepends for QtWidgets, but this only
works for modules, not for tools, examples or other applications.
For now we'll use the Qt<Module>/Qt<Module> headers for the
modules we depend on.
Building with PCH can be disabled with -DBUILD_WITH_PCH=NO, and it only
works for versions of CMake newer than 3.15.20190829.
Change-Id: Iae52bd69acfdfd58f4cd20d3cfa3c7f42775f732
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Ie34c03c409a20546ace1ddc84f8813c1772936f7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If syncqt was not executed for a module, it will not have generated
headers, so we should not propagate the include/${module} header
location in that case.
Change-Id: I6dc0628a11ababb4d237215a9f4d3fc331383848
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
As with qmake, you configure with or without -nomake tests -nomake
examples, and the choice is propagated to other repositories.
Do the same for CMake. It's still possible to opt out to build one
or the other by passing -DBUILD_TESTING=OFF -DBUILD_EXAMPLES=OFF
on the command line, which takes precedence over the value saved to
QtBuildInternalsExtra.
Change-Id: If0fbfa938d88309e7969c9bacc8d0bf86548bf5e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Fix the silly boolean logic error in commit
9c1b7802d7.
Change-Id: I9dd0d3e8be5cbe75583099686a623d81d3dd87fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is similar to qmake, where the .prf files from the source
location of qtbase/mkspecs are used in a non-prefix build.
This means that if a developer changes the source QtBuild.cmake,
and then runs make in qtdeclarative, cmake will reconfigure
qtdeclarative because the timestamp of QtBuild.cmake changed.
Before this change you first had to make && make install in the
qtbase build directory, before qtdeclarative saw the modified
QtBuild.cmake.
This change also makes the module paths be prepended to
CMAKE_MODULE_PATH instead of appended, which means they will
take precedence to any path provided via command line.
Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't create the plugin config files when doing shared builds, otherwise
for example Qt6GuiPlugins.cmake will try to include the xcb plugin cmake
config, which in turn will perform a full-fledged find_package series to
locate xcb. When an application just uses find_package(Qt6Gui), then
that is not needed.
Change-Id: I1890aaa5be8e214151c65fa981f547a73c0ca7fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
QtUiTools in qttools is a public module that has only headers, so it's
an interface library in cmake. That means INTERFACE_INCLUDE_DIRECTORIES
cannot contain paths to the source or build directory, unless they are
prefixed with BUILD_INTERFACE, which this patch adds.
Change-Id: I047700f447237dfbe5a901072eb413a159ae537d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Fix up the previous commit and use separate COMMAND parameters for
add_custom_command to ensure the expansion of the PATH. The injection
via -E env "/some/dir;%PATH%" does not work as the dollar expansion is
not applied when the ninja command uses cmd /C. This relies now on
undocumented behavior of cmake ;(
Change-Id: I5b5fc88e4c13f8fb6c6bba3131204c2eb35404d6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Our tools are typically installed into the Qt bin directory, after which
they are useable right away on Windows, since the Qt dlls are located
there, too. An exception to the rule are tools that are built within a
module and used right away. At that point they are in the top-level
bin dir of the build directory, along with "local" DLLS they might need,
but with the Qt dlls out of reach. To cover this case, we need to
prepend a PATH adjusting command when using these with
add_custom_command.
Change-Id: I7f58581f5060c8004b5d1fa1f6f17297256783de
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Do not build examples in static builds as they are not prepared
for this configuration.
Change-Id: Ia0fd0a6cdfa3733bf13eb2ca8398668f26c0bedf
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the ICC configuration we can't build the qtbase libraries with ICC
and qtdeclarative with gcc, mixing won't work well. On Windows we've
covered this compiler mixing scenario using our toolchain file, but the
ICC case makes it clear that we have to be consistent about caching the
compiler in the toolchain file across platforms.
Change-Id: Iad2005ab00655f902e5f5cea2f0563d790d8aa93
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I8cb97afaaed46ee64b5a133e797179d7ddecdeef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building QtQmlDevTools we don't generate syncqt headers, but the
non-existent include paths were still added, which means that anything
that used QtQmlDevTools would fail to configure (the standalone tests).
Make sure to only add the include paths if syncqt was executed.
Change-Id: I6d79ecf53e9a5d396e8df801584ce2c9f119f9be
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Whenever the qml compiler is used to process qml files from a
resource, and there are no resources left after all qml files have
been processed, make sure to propagate the created resource target
to add_qt_resource, so that the target is associated properly with
an export name.
Additionally the generated qml cache loader file uses private Qml
headers. Thus the object library that contains the cpp file should
have qml as a dependency (and not the target that will link to the
object library).
Change-Id: Ib385a900823df3e015492cdd06acd8a0cb9f8e9a
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Override the default binary path for qmlimportscanner so that it points
to the host build specified via QT_HOST_PATH.
Change-Id: Ib0b47e61315c87ce6225e2d8ca84043cae03357d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update Android build configuration to be compatible with the multi-arch
android build patch to qmake. We can now build and generate the apk
correctly. Executing on the device/simulator will only work once the
latest changes from 5.14 have been merged in.
We now replace target suffix with ${CMAKE_ANDROID_ARCH_ABI}.[so|a] so
we don't have to deal with handling targets which might have any of the
OUTPUT_NAME properties set.
The dependency and deploy settings generation has also been updated to
append the file contents to a string and then do a single file write
at the end.
Change-Id: Id3c5bd0428141ecaf962124a100390e3a4e41feb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qmlplugindump is not build during a Qt static build, so there's no
point in creating custom targets that would run the tool.
Change-Id: Id7d6d44da63312f298f46eab08a5637cb0c97c8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment we only support building with Emscripten, so that's the
system name to look for.
Change-Id: I08782ed0201da1593058bf1fb2ec61d6660802ed
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The first issue is that instead of arg_OUTPUT_TARGET we should use
rcc_OUTPUT_TARGET (there was also a typo in the OUTPUT word).
The second issue came with the fact that the object library targets
that were created for resources had a "Qt6::" namespace prefix in the
exported Targets files, and yet the link generator expression did not
contain the prefix. This failed when building qtsvg in a static build,
because the exported object library could not be found.
The solution is to use the TARGET_NAME generator expression which
takes care of adjusting the name of the target when exported, thus
making the linking work both when building qtbase and when building
qtsvg.
This had the fallout, that all resource object libraries need
to be associated with an export set and installed. This wasn't the case
for plugins, because plugins have an export name of the form
"FooTargets", whereas the export name for the resource object library
is "Qt6FooTargets".
Adjust the export names of plugins to be the same as for modules and
resource library objects (aka contain the "Qt6 prefix").
Change-Id: I1ca28d20c51e4447e5783cc20571a68ec77f6513
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure to document both variables are required when invoking cmake.
Otherwise, one might be omitted causing side-effects.
Change-Id: I3390df1cb5352ea6113952c99fcedef5336f2fc1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* The -no-undefined linker option only makes sense for shared
libraries. The WASM build is a static build though.
* The -gc-sections linker option is only relevant for host tools
and certainly applicable to the WASM toolchain.
Change-Id: Ib8daec66a6d80f5025887448882dd891e6176268
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is a simple mis-understanding between try_compile assuming interest
in the launching part of the thing we try to compile and our
architecture test being interested in the binary.
Change-Id: Ie972b662b6f34699f566649bb2c1e29da35b58c3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing qml root path variable in the deployment configuration file.
Not having this variable will cause androiddeployqt not use the
qml dependency scanner to package all relevant dependencies.
This patch also fixes QT_ANDROID_BUNDLED_FILES files not being
processed.
Change-Id: I5bca33cdbb57098f283b38516b777571806da9e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Assume that interface libraries can't have plugins for now, otherwise
we'll need to change the "MODULE_PLUGIN_TYPES" property name to
include INTERFACE_ as a prefix.
Change-Id: I21b64179ded5fd10216d843a21ee149e002793f3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
From all the observed cases, the parameters given to OUTPUT_DIRECTORY
tend to be CMAKE_CURRENT_BINARY_DIR, which was the default value. This
change is mainly to avoid add_qt_test failing if OUTPUT_DIRECTORY is
specified.
Change-Id: I26b931dd33ad1e991b64c14cc11b4b7a713fc858
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Prevent the quick compiler running on embedded test data for platforms
such as Android. This breaks certain assumptions about the test setup
otherwise.
Change-Id: I1026da3e16552256623de26b843ea32ed2c4260e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On android test data is embedded into to the binary via resources. This
will not work with sourceless tests such as the qml only test cases.
Change-Id: I3ecf28223b3c7c6dae4ca3f15519adc028082598
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
When using the quick compiler to compile qml files, add an explicit
dependency on Qml. This will result in linker errors otherwise.
Change-Id: Ib7af0e8ec1b48822fd0d3c3556f10d24f10e7489
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also add support for modules that have no private module counterpart.
Both are needed for Designer's QtUiPlugin in qttools.
Change-Id: Ia7e9d8837140e1de5cd59e196b4f63481ab68298
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Specifically what each of the list variables in
qt_internal_create_module_depends_file is used for.
Change-Id: Ie4f8c0d7387308518932d37e802ecaeb0572b955
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
The content of the generated header files should reference both public
and private Qt module dependencies. This is the same as what qmake
does.
Change-Id: I2e47c93291d677b86af7bb80fb788b2acf939743
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In some places of the build system we need to iterate over repo specific
Qt known modules (aka the ones that are built in the current project).
In other places we need to iterate over the whole list of known Qt
modules (those found via find_package + the ones built in the
current project).
Introduce two separate functions that provide access to either the
former or latter, and adjust all existing usages of QT_KNOWN_MODULES as
needed.
Change-Id: Ica96d0cfe690b9aaaa3f8c53bc84975bccad69c7
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
When building tests for android some resources names had the "#"
character in them which triggered a CMake error when use in conjunction
with add_custom_target()
Change-Id: If5f471eebb027683e86b0c4e38c2f34ff8891b7a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing required resource prefix to add_qt_resource() call when
embedding test data as a resource.
Change-Id: I9130f9ae863daae80221a1475b077b1d2e501f6d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch moves all of the underlying code for add_qt_resource
into a common reusable snippet for both the Qt build and user projects.
For users, the new API is available under QT5_ADD_RESOURCES. If
outfiles is a CMAKE target we will use the new API, otherwise
we will fall back to the old behavior.
This patch also adds EXTRA_CMAKE_FILES and EXTRA_CMAKE_INCLUDES to
add_qt_module so that module specific cmake files can be installed
and loaded by the module's config.cmake.
The code will be installed under CMAKE_BINARY_DIR/Qt{}CoreResource.cmake
and is injected into Qt{}Core_Config.cmake via the extra cmake includes
passed into add_qt_module.
To make sure it still works with QtBuild, we do the actual generation
of the file from QtBaseGlobalTargets and include the generated file
there as well.
Change-Id: I85fefaa11dde01a6790d23c62d6a64cd157e2617
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This condition was not being properly evaluated since the cached variable
was treated as a string. Any checks with if(QT_WILL_BUILD_TOOLS) would
just verify whether the string was empty or not.
Change-Id: Ie8b9ecc8249a1e9f5c0aa1b13d5bef686fcb04de
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building qtsvg or qtimageformats there are a bunch of
configuration warnings like:
The plug-in 'qtiff' does not belong to any Qt module.
This happens because qt_get_module_for_plugin() checks for modules
only in the QT_KNOWN_MODULES variable. find_package()'d modules
will not appear there though, but only in
QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE.
Change the function to check for Qt modules in both variables.
This fixes all the warnings regarding plugins not belonging to a
module.
Change-Id: I39e668801a93794b62888cf868b97c55f57dccdd
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I don't know why, but previously the test data was copied to
"test_build_dir/testdata" subfolder. That's incorrect, there's no
need for a testdata subfolder, the copied / installed contents
should go directly under the test build dir / install dir.
Incidentally this will make the corelib/io/qdir tests to pass.
Amends 1307736c7d .
Change-Id: I9e180d608433fe82f4a29afea7f594507e6020d3
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Teach pro2cmake to use add_qt_test_helper instead of
add_qt_executable when the qmake 'qt_test_helper' feature is used.
Don't use macOS bundles when building tests on macOS, because that
breaks path assumptions for certain tests.
Introduce a new OVERRIDE_OUTPUT_DIRECTORY option for add_qt_test_helper
that allows placing the binary into a folder other than the test parent
folder. I considered changing the default behavior not to place into the
parent folder, but that would break all existing tests, so I opted for
override approach instead. Ultimately we might want to revisit this
later.
Change-Id: I68fd1dea608333c2af0d3896050b40a6964dd87f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename the alias property used by add_qt_resource() to QT_RESOURCE_ALIAS
to match property naming conventions.
Change-Id: I97b12b0b794e158f03dabeed5ec23a3b7d56cfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Support translating the QTQUICK_COMPILER_RETAINED_RESOURCES variable.
Fix missing PROPERTIES keyword for set_source_files_properties() commands.
Apply source file properties to standalone source files as they appear
in the project as it was possible for them to inherit values that were
not meant for them.
When creating resource lists, prefix them with the resource name
to avoid collisions.
Change-Id: I69ef85ea9414c0e7c07b1ebfb76d24bd878ce70f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When pro2cmake converts qrc files that are located in a subdirectory
there is an error in the resource paths for qrc files generated
with add_qt_resource().
For instance, consider the contents of data/scenegraph.qrc:
<RCC>
<qresource prefix="/qt-project.org/scenegraph">
<file>"shaders/24bittextmask.frag"</file>
</qrsource>
<RCC>
After processing by pro2cmake and add_qt_resource() we generate
<RCC>
<qresource prefix="/qt-project.org/scenegraph">
<file alias="data/shaders/24bittextmask.frag">
${CMAKE_CURRENT_SOURCE_DIR}/data/shaders/24bittextmask.frag"
</file>
</qrsource>
<RCC>
The expected qrc path for the resource should be prefix/shaders/...,
but in CMake it becomes prefix/data/shaders/... due to the
BASE parameter.
To fix it we check whether BASE is set and whether there are no
other aliases present on the source file before setting an alias
with the original file path.
Change-Id: If0a68a5ffa787704b10b740e20f875c9029509b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Export the architecture configuration variables from QtBase. There are
other modules that require access to this information in order to
enable certain features (e.g: qml_jit in QtDeclarative).
Change-Id: If2c7f29ccb1c0b0a0db3d78ad133a2a6be12b5ad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Added substituion rule to qt_internal_module_info to replace '.' with
'_'. Fixes compile errors for targets with names such as Plugin.2.
Change-Id: I0754c771bdc456a8a8f450fba90792c98d276c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We now compile all qml files from the quick compiler in separate
directories qmlcache/${resource_name} to prevent issues where the same
qml file is present in more than one resource file.
Change-Id: I6857ff6aaaa21112896d5d39bbe11d3ffe524ec8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If the variable resource_files existed in the parent scope, the list
would now be duplicate.
Fix case where TO_CMAKE_PATH didn't properly convert //Foo into /Foo,
so wee need to handle this manually.
Change-Id: I73f1b4db82f6a80ba00da928b39091ac6c968a02
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change makes the PREFIX parameter a required parameter if the
target does not specify a default. This way the behavior is clear when
reading the code: add_qt_resource() without PREFIX means it must come
frmo the target.
Change-Id: I79024e70e7b4d32a5164b93aa08ec9ff409b2d39
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
* Add support for a QT_RESOURCE_PREFIX target property, that
add_qt_resource respects. This makes it convenient to add files
to the resource system for a project without the need to repeat
prefixes. In qmake land with multiple resources they're repeated
in the foo.prefix variables or in the prefix attribute in .qrc
files.
* Since /qt-project.org/imports is in the default QML import search path
and the hierarchy under the import search paths is "regulated",
we might as well make add_qml_module set QT_RESOURCE_PREFIX on
the target. We can compute the correct value for that. This
allows removing the redundant prefix from the add_qt_resource()
calls for the qml files.
Change-Id: Ic15130dc9e432340fc3edf93e35f2a803b4b40eb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
There was a missing dependency rule which would cause the generated cpp
file to not be updated when changes were made to a qrc file generated
through add_qt_resource().
Change-Id: I9544c2fb6cf49529913f731b8fb6fc524d65e40c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Detect this in the conversion script and map it to a source file
property. When that's the case, avoid repeating the file list but
instead store it in a variable.
Change-Id: If3119d83914bb798766e27351746b4e867bd3ab3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Minor tweaks to make sure QML test cases without source files work as
expected.
Change-Id: I30b72622692b8f36d01f7a17b9d1456b0ab223ea
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
File passed into add_qt_resource are check to see if they match valid
qml files extension. Those which match the latter are then processed
by the qt quick compiler should the qmlcachegen target be present. We
also ensure that any remaining resources are properly chainloaded.
If the qmlcachegen target can't be located a warning be will be
issued asking for the inclusion of QmlTools in the find_package
command.
Change-Id: Ieecd38670e15c21d94dc549b31c7d87f2383d9af
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
While trying to port qtgraphicaleffects, when trying to configure
the project with a non-prefix build, the configuration fails with
the following error:
CMake Error in src/effects/CMakeLists.txt:
Imported target "Qt::Qml" includes non-existent path
"../qt_cmake/qtdeclarative_built_developer/include"
This is because we incorrectly export public include directories
that point to an "/include" folder under the repo build dir, whereas
in a non-prefix build the syncqt "/include" folder is actually in the
qtbase build dir.
Fix this, by introducing a new variable called "foo_repo_include_dir"
which will point to the correct include directory regardles of prefix
or non-prefix build. This variable is set by qt_internal_module_info.
Fix all relevant places to use this new variable. Also streamline
and remove any unncessary include directories in all our functions,
thus making everything consistent and hopefully easier to understand.
Change-Id: Icbe884701275c7754daecadcdba18048b4d779d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Perform the test whether tools should be built before entering the
source directory of a project. In QtDeclarative this would result in
a configuration error since the tools are used while building everything
under src.
Change-Id: I33ce2cb317ef221836d696654f3bb4e39db47e54
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure the URI name for qml modules correctly strips out the version
number for instances such as QtQuick.Controls.2.
Change-Id: I18e706b371323eeefdd6d7564b922265fa5cad3f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The rcc generated code relies on global constructors to register the resources.
The object file of the generated code is included by default in shared libraries
and executables. However when the object file ends up in a static library, the
linker will discard the object file when nothing references any of the symbols
in that object file, when linking the static library into the executable/shared library.
The solution is to link the object file straight into the final target, by means of a
cmake object library.
Change-Id: I02ad1173e4f7e8f907022c906640dc9086233676
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to the missing argument processing on PUBLIC arguments we could
run into situations where the defines for an executable (mostly tests)
would be incorrectly processed.
If one were to pass a define into a test that also specifies public
libraries, the defines passed in by test would fall under the
PUBLIC_LIBRARIES argument in add_qt_executable.
For instance, in a test with DEFINES Foo PUBLIC_LIBRARIES Core
would cause arg_DEFINES to be "Foo=BAR;PUBLIC_LIBRARIES;Core". This
combined with the defines specified by add_qt_test would result
in the following string "Foo=BAR;PUBLIC_LIBRARIES;Core;TEST_DIR=..."
and would cause TEST_DIR to be treated as a public library in
add add_qt_executable.
For some reason I can't figure out, these two defines end up in the
linker flag section of certain test programs. There is nothing wrong
with the rest of the propagation chain into add_qt_executable. My best
guess is that it has something to do with the generators. In any case
add an explicit -D fixes the issue.
Change-Id: I340790c1c2426fa76785d1bd1b3332a904323d56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has been decided, that going forward all qml files are to be added
to a module via the resource system. This patch does the ground work
to make sure all qml modules in the qt codebase follow these new
conventions.
New properties on targets have been added so that we can't track all the
qml related information for later use.
To make sure it is still possible to install qml files we added the
qt_install_qml_files() command.
Pro2cmake has been adjusted to handle the special cases of versioned
qml modules (e.g: QtQuick.2). It will now insert a TARGET_PATH
override to avoid the default conversion from the URI parameter.
Finally, this patch temporarliy disables the quick compiler by moving
all relevant code into a dummy function. This will be removed in a
follow up patch where the quick compiler will be enable for all
qml files present in resource files.
Change-Id: I09fe4517fad26ec96122d9c7c777dbfbd214905c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds support for the qtquick compiler feature, which
will embed the compiled qml files as resources along with the
respective qml_loader.
This patch also changes the add_qml_module call to require either
EMBED_QML_FILES and/or INSTALL_QML_FILES to be specified.
Change-Id: I32d29c9b554b8286ed3b980027a56dd4abe11c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure that the .qml/.js/.mjs files are copied or installed into
their target destination.
Change-Id: Ib1649e5168c9fe3a570800af92d82293e5b295d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
When building qtdeclarative against a static iOS qtbase build,
QtNetwork is find_package'd twice, once in the top level
CMakeLists.txt file, and once by the qtuiotouchplugin which has
Network as a dependency.
This meant that the static plugins that Network exposes had
auto import cpp files generated twice, which failed the configuration
of qtdeclarative.
To fix this, don't generate the same file more than once.
To do that, protect the inclusion of the FooPlugins.cmake file, to
only be included once in every directory scope. That can be achieved
by setting a variable to TRUE when the target does not exist yet.
If the target exists in the same scope, that means that find_package()
was called a second time in the same scope, so there is no need
to include the Plugins file.
Change-Id: I9d7c3e7b7c22c2b4526cf1d717b9d15919f213f3
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When cross-compiling qtdeclarative, add_qt_tools makes sure to import
the host tool and not build it. But there are also some
extend_target and add_qt_resource calls which try to extend the host
tool.
Make sure to protect those functions not to do anything if they are
called on an imported target.
Change-Id: Ifd8bcab8e56ad389a8c145382b23bd2c1bda5e81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After re-arranging subdirs, the cmake target level dependencies can
handle building qmlcachegen before running the custom command for
generating cache files.
Change-Id: I8a35b2b5bfd2fdf4b49462ff9c27e5f3075254fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure to handle glob expressions in the entire path given, not just
the end of the path. This handles tests like qsslkey and qnetworkreply.
Also copy/install the testdata in the final test directory path under
a "testdata" subdir.
Previously INSTALL_TESTDIR was used, which was never set to anything.
Change-Id: I2408e12f586cadeb524ffa249e851a4179324b23
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
This patch adds support for qmake's qmlcache feature. It's enabled
when option EMBED_QML_FILES is not present in add_qml_module.
Change-Id: I9b35f0bda7dfaf777f55c14eaf3d763f9b550fa4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some projects in QtQuickControls force the qml files to embedded into
the binary. This change exposes an option to mimic that bevhavior.
Change-Id: I4cbf0c21c05ca03b8dd1189eb7d81e43279c7157
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extend add_qt_test for qmltest by setting the option QMLTEST
when we detect the config qmltestcase.
We also forwards the GUI option to the tests when detected.
This is a requirement for some QtQuickControls2 tests.
Finally when doing a prefix build, we add the install directory
to the QT_PLUGIN_PATH environment variable.
Change-Id: I3b2ecb494955976e98abbcf3d03925c314336122
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure that paths passed to qt_copy_or_install are prefixed with
QT_INSTALL_DIR so that they behave correctly with prefix and non-prefix
builds.
Make sure that plugin.qmltypes and qmldir are also copied to binary dir
when doing prefix builds to match qmake's behavior.
Change-Id: I6f87ed478e797c9f66dbf85264904ad29a60ad95
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
The build failed due to two different reasons.
We tried to assign properties on an aliased target, which does not
work. Make sure to set properties on the original unaliased target.
We tried to query for the value of the QT_DEFAULT_PLUGINS property
when automatically linking to plugins, but the generator expression
failed in the AND section, because querying for an unexisting value
does not return an integer, and the AND expression expects an integer.
The fix is to wrap the relevant expression in a BOOL generator
expression.
Change-Id: Ia065bc1de939cee49e5de0b2aef70e356cc5419a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Some author warnings don't make sense when dealing with QML
plugins, like the messages regarding CLASS_NAME or not
belonging to a certain module. Take care not to print those
warnings in those cases.
Change-Id: I017bd63cca650dc262337949242e813b7b6a56cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QT_WILL_INSTALL was previously always set to ON when doing a
qtdeclarative build, because
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT evaluated to false due to
always having to set CMAKE_INSTALL_PREFIX to point to the qtbase build
directory.
Instead of recomputing the value of QT_WILL_INSTALL, compute it once
while configuring qtbase, and add it to the generated
QtBuildInternalsExtra.cmake file, so it propagates to all other repos
that will be built.
Change-Id: If8bf63e7501b5758fe7aa0f799cb0746704f4811
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reduce the amount of code required to add a qml plugin to cmake
by making add_qml_module wrap the add_qt_plugin code where required.
add_qml_module will also create a dummy target so that qml files
will appear as source files in an IDE when no cpp files are present.
CXX_MODULE qmake parameter has been dropped in favor of an
explicit IMPORT_VERSION parameter, since it was only used to
determine the version when the IMPORT_VERSION was not specified.
Change-Id: I4a4b626566720d04c62d246ca521db8c4a95b10f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These changes enable the support to handle test data and install or
package them as resources when appropriate.
This change does not handle the GENERATED_TESTDATA or
TEST_HELPER_INSTALLS since there are very few occurrences of these and
we can handle those as special cases.
Finally, in add_qt_test, only append CMAKE_CURRENT_SOURCE_DIR if
the path is not absolute.
Change-Id: Ic20b9749d10e2a09916f2797606116471c64850b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add the necessary code to both the QtBuild and pro2cmake to be able
to handle qml plugins in qt declarative.
Add condition replacement for QTDIR_build to QT_BUILDING_QT so that
certain qml examples work correctly when being built in the build
directory.
Fix add_qt_resources not being updated during build after changes
were made. Files list used as dependencies were not populated.
Add missing module mappings for qtdeclarative.
Change-Id: I0f71d0a3a0e7e97ba96807950d11cffaee04d9b2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
f66c1db16c in qtbase introduced a new
macro that the moc scanner has to look for.
Set an explicit list of macros to look for in the
CMAKE_AUTOMOC_MACRO_NAMES property of every target that has AUTOMOC
enabled, otherwise CMake AUTOMOC won't run moc on files that contain
the new macro.
Change-Id: Id991a70d773cef66716621803a88e96b44a80650
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is done by adding a DEFAULT_IF argument to add_qt_plugin, which accepts
if-evaluated expressions.
e.g.
add_qt_plugin(myplugin
DEFAULT_IF ${foo} STREQUAL ${bar}
...
)
so that this mechanism can be reused later if necessary.
Change-Id: I7eba9adaaa28e55a4f0f94cf206e868b990027e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the cmake install prefix was added twice during a non-prefix
build, which evaluated to an incorrect path.
Set another absolute dir variable, and use that instead.
Change-Id: I73099510dadc8f401d5a763f21840c9671686c10
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Add QtAutoDectect cmake which has routines to handle the vcpkg detection
as well as set up some android configuration parameters. The latter will
contribute towards keeping the cmake configuration commands shorter when
targeting android.
Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Update the cmake README file with explanations on how to target the
other available Android architectures.
Change-Id: Id7653abc4a1a6fbb96797014ce2ca2e6bb49943d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Mixing compilers won't work well on Windows, so if qtbase is built using
cl.exe and Ninja and then later cmake is called on another module and
gcc is found in %PATH%, then cmake will prefer that. Let's avoid that.
Change-Id: I8294482939efa6a16e0a4df8df3aeef8243c3657
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The run_config_test_architecture() function in QtBaseConfig was not
working correctly as we were not updating the length of the line
properly.
Change-Id: I29c5b45f1fa36d16cb2ef00950feb80987f6b176
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to save them in the toolchain file, otherwise we can't compile
anything :)
Change-Id: Ic5c53524fa4aa05d0b3229c2905dff92ca437ec1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt
tool. This will ensure all the right plugins and dependencies are
packaged when generating the apk.
This change also changes the visibility for executable to default/public.
Not having this will cause the application to crash as we can't locate
main() in the executable (shared library).
Additionally pro2cmake conversion script has been updated to perform
the required conversions for the Android settings.
Finally, the 6 projects in QtBase that have Android dependencies have
been updated with the new script and the step that produces the xml
files in run at the end in QtPostProcess.cmake.
Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Similar to the shell script, this makes it easier to invoke cmake by
just extending your PATH.
Change-Id: I1f83e93c507032f6ecf4838c11d62f49f4d93ed6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Just like with qmake, separate the two "features".
Change-Id: Idf2a796c7c4aaa740c471688b2221d7041fed643
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For ICU we have multiple components, and ICU becomes a public dependency
to QtCore.
When storing the INTERFACE_QT_PACKAGE_COMPONENTS property, make sure to
store the entire list of components, not just the first component -- by
turning the semi-colon separated list into a space separated list.
When processing the components at find_dependency time, we need to
reverse that and pass COMPONENTS directly to ensure a correct parameter
expansion.
Change-Id: I24a0708520e7d5fba039395a151034aee4d4c0e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Add labels so that ctest --print-labels and ctest -L <label> gives
insight over the test plan and the ability to run easily individual
tests.
* Unfortunately we can't do the TESTARGS indirection for arguments as
coin does with testlib, so instead pass the parameters to generate
the xml unconditionally.
Change-Id: I289de9c15c516e3ac3fe04771fdbd8d7a083ff1f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to scoping this variable needs to be written into the cache.
Change-Id: I2704fe9ac138210571e0b7acada5eb5c65e265af
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The current state of qtbase is confirmed to be built with no warnings
when using up to Xcode 9.2, as per the check in
mkspecs/features/qt_common.prf. Add the same check for the CMake
build.
Change-Id: I0c2409ece048e93fba29c41a8bd053dd112949bd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When cross-compiling we take a shortcut in add_qt_tool() for moc, etc.
as the tools are already imported from the host build of Qt. However we
must still add the tools as a dependency in for example QtCore so that
when the cross-compiled QtCore is used, the host tools are implicitly
imported.
Change-Id: I83e4fd7f21e18472c0965c90c058dd2b55b6ec65
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When the host system uses 64-bits for pointers and the target 32-bits,
then locating the tools dependencies would fail due to the mismatch.
Since the tools dependencies don't create linkable targets but merely
import executables, we can skip this check like in commit
914b367c7f.
Change-Id: I1ebd0867e4cce34f42df21dc8e8d9176a83a9cac
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This gets us a step into the direction of convenience that qmake
offered:
* QtBase is configured with a long command line (especially when
cross-compiling)
* Afterwards application developers (or other module builds) can
just use qmake && make
By generating a toolchain file we can capture vcpkg and toolchain
chain-loading and a shell script can take care of providing the prefix
path.
Change-Id: Ided81f5432cab862306f2bea86cfe8e56adf71b0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
add_library(MODULE) creates libraries with .so extension on macOS,
but Qt plugins should have the .dylib extension.
Change-Id: I603e7abfb9d5b78c0c8ea526f9fe995bf36c3a50
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
All the other PlatformModuleInternal, PlatformPluginInternal,
PlatformToolInternal target will depend on the common one.
Also add the QT_NO_DEBUG definition when the build type is not Debug.
This fixes the lookup of the Qt platform plugin on macOS, which
uses a "_debug" prefix in the plugin name depending on if the
QT_NO_DEBUG definition is present or not.
This is the same as it is done in mkspecs/features/qt.prf.
Change-Id: I82cf461d44b8a3b3c5dc2b2d9f25baa246fc1e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We want our libraries to end up in the same bin directory, not inside the
Debug\ or Release\ sub-directories. Their distinct names avoid a clash.
For our tools such as moc, uic, etc. we need to place the release build into
the bin directory explicitly, as by default multi-config generators place
binaries into the Debug\ or Release\ sub-directory.
This is also needed as cmake's automoc itself expects moc to be in the
bin directory.
One effect of this is that with a multi-config build, it is always necessary
to perform a release build first, otherwise the debug build won't find moc/uic.
Change-Id: I1361823ddf5961a5f1bb517e4bca69e621cbce9e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If VCPKG_ROOT is defined, let's use it and chainload any previously set
toolchain file. The detection of vcpkg support via the VCPKG_ROOT
environment variable is per vcpkg documentation, the automatic
chainloading is something specific to us.
Change-Id: I0498effc5b948f0b6f5e223d0454a15a0cbb503a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As per vcpkg documentation, this is a tweak that allows respecting the
vcpkg default target triplet environment variable, which simplifies the
command line slightly.
In order to make this also work for modules other than qtbase, we're
going to need to consider the creation of a toolchain file.
Change-Id: I2573f6644d671c710fd823df83e2205dbbfe19e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Remove the special case in QtGui and instead handle this in a generic
way so that QtPrintSupport is covered, too. For now we do this in the
same function where we run the regular target install() commands. It
doesn't quite fit into per-target PUBLIC_HEADER or PRIVATE_HEADER
properties as the qpa headers sit _next_ to public and private in a
separate qpa sub-directory.
Change-Id: I30aadaf9496cf0236f39a7c36a5163e4270edecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Always install - not installing doesn't make much sense.
Add information about developer-build.
Change-Id: I406d007e9b167ee83d126ffa6e78235743402c33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
Builds fail on Windows, due to splitting on ':' on absolute file paths,
when handling syncqt injections.
Revert for now to get qt6 merge in faster.
This reverts commit 7559d508d1.
Change-Id: If139a8a1eb4ae7ccc8d7b835b12e83b03176e28b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In case of a CMake superbuild, the actual install root in a non-prefix
build is the top-level build directory (not $TOP_BUILDDIR/qtbase anymore).
This is more in line how CMake lays out things by default.
Task-number: QTBUG-75582
Change-Id: I4e1744b5c877508fedc33e237eec28cb7436010b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
in qt_build_repo().
This is important for qtdeclarative for example, which builds QmlTest
functionality in ./src, and thus needs Test lib to be available.
Change-Id: I84326d79844526f2f177c19de30bab0c858773e3
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of doing it just in qtbase/src, we need to do it
for all repos before building ./src.
Change-Id: I57f226b849cd5370ffbbbea8a694697d400957a4
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
The GlobalConfigPrivate target should also be filtered out when
registering target dependencies, because there's no standalone
Qt5GlobalConfigPrivate.cmake file.
Amends fbfa067a30.
Change-Id: If89732bc2fd004b9644959f71339e22210483d7c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were a few issues:
- Third party dependency info for plugins was not generated,
because the depends and public_depends variables were not fetched.
This caused issues when trying to use the qcocoa plugin in a
consuming application, because Cups::Cups was not found.
- Privately linked libraries in extend_target were not considered when
generating dependency info for modules. This caused issues in
QtThemeSupport, becauese it could not find Qt::DBus, due to that
target only being added as a private library in a conditional scope.
- Make sure to handle privately linked internal modules like
PlatformModuleInternal to map to the Qt5 package, because there is no
standalone package for it.
Also remove a TODO comment that says that qt_register_target_dependencies
should maybe be called in extend_target. That's already the case.
Change-Id: Ie99c52e800cd89e6f82008f1e38f4da5cd602929
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
In Qt 5, the Qt5Core target was extended by Qt5CoreConfigExtras.cmake to
have a generator expression as interface linkage that would
conditionally link WinMain.
This patch implements the same through regular interface linkage right
in corelib. Since the linkage happens through a generator expression,
our dependency generator does not see this as a dependency. Therefore we
add this as an unconditional package dependency for corelib, on Windows.
In theory this could be done also in winmain's CMakeLists.txt, as
targets can be extended outside of their directory. However this adds a
directory id (WinMain:@<023423>) to the linkage, which mysteriously is
not removed on the exported core target.
Change-Id: If2abb9ba790f51274f582c9ec28c13d968b84302
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Commit abe12f600b moved the
_LARGEFILE64_SOURCE define to a central place and commit
449eee2d10 made it conditional to UNIX
(not WIN32). Somehow these two were left over though.
Change-Id: I23b08e84db804e9d5a4dde706af501c0918b460e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's already installed right where QtSetup.cmake is installed.
Change-Id: Ie88363ae3878cda8f92aa44160333886f64565d8
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the android deployment settings json for android apk
targets. QtPlatformAndroid is now also deployed as a public
build dependency of QtCore. Some minor refactoring has been
performed to the naming of variables and functions to
better match the public facing apis.
Extra settings for the file can be configured using the
following target properties:
set_target_properties(Core
PROPERTIES QT_ANDROID_DEPLOYMENT_DEPENDENCIES "foo;bar"
QT_ANDROID_EXTRA_LIBS "foo;bar"
QT_ANDROID_EXTRA_PLUGINS "foo;bar"
QT_ANDROID_PACKAGE_SOURCE_DIR "/foo/bar/"
)
The file is generated using the function
qt_android_generate_depoyment_settings().
We need to install the android template files and jar
files during the android build as the androiddeployqt tool
wont work if parts of it are split between the host
install and the android install.
Added QT_BUILD_QT variable to check whether we are building
Qt from source.
Finally, we also force the stdlib to shared via cmake
configuration with -DANDROID_STL="c++_shared"
Change-Id: I063c47e11749d56ba4c6f02101dbcc09e1b9fe87
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake land warnings_are_errors is only enabled for specific
MSVC versions, ending with MSVC2015. Presumably the warnings have not
yet been fixed for newer MSVC versions, so we stick with the same
status quo for now.
Change-Id: Idc3741d39c888f77ed324a5eb8c654416591785f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In qmake land, the largefile.prf feature is automatically loaded due
to 'largefile' being added to CONFIG via the equivalent feature.
The prf file is in the 'unix' subfolder though, which means that qmake
doesn't load it on Windows.
We need to do the same, otherwise we get build errors due to the
define being checked in ZLIB headers, and selecting an invalid code
branch on Windows.
Change-Id: Ibe9202a639754927262bb8aaa28289934f2e23ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed for QmlDevTools in qtdeclarative.
Change-Id: I41adec15f292c91192e171b45d1e5d48764c37c4
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed for qtdeclarative, to automatically start building
the tools if needed.
Change-Id: I3cbe129e8bb6fa8572a8e34fd3653b51727cb244
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move flags/options that we use for modules from add_module to the new
platform module target.
Change-Id: I89e414690336dcd37253432fe5116226d1c8dd82
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
extend_target.
In extend_target(Foo) we go over all the ModulePrivate dependencies
to assign them to FooPrivate. To do that we use the QT_KNOWN_MODULES
variable.
The problem is that the variable gets reset when we build a new
repository, so when we build qtdeclarative, QT_KNOWN_MODULES has no
entries for Core, Gui, etc, but only Qml, Quick, etc.
And yet QmlPrivate has to depend on CorePrivate.
Change the module Config.cmake files to append their target name
to a global variable called QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE.
The global variable gets populated every time find_package(QtFoo)
is called.
Use the union of QT_KNOWN_MODULES and
QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE when considering FooPrivate
libraries.
Change-Id: Ibd9449744478cea58eb5d9737cc8887b4df92420
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Added qt_examples_begin() and qt_examples_end() macros to setup the
example list so it can be re-used in other projects.
When cross-compiling, we also need to set
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package()
to work correctly.
Removed support for building the whole qtbase/examples folder as a
standalone project. Building examples is only supported when building
the whole of qtbase (qtbase + examples together) or each individual
example is built separately against an installed Qt version.
Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move the include of the platform from QtPlatformSupport to QtSetup. This
no longer causes compile tests to fail since they expect explicit
include paths instead of using CMAKE_MODULE_PATH.
Change-Id: I9d3bed7845104d84422afb5a976ec14b111d259d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't try to report an installable public module .pri file for internal
modules.
Change-Id: Ide6a50420e0b5448b141c842df4c891baca4a9d9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Link to them from add_qt_module/plugin/tool
This way we set the warnings_are_errors flags just once
and also non-qtbase modules get them
Change-Id: I2b65a81694aaebdd7c886249f217c11f79492bad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
... in superbuilds. PROJECT_SOURCE_DIR points to the wrong directory in
that case.
Change-Id: Ic0cba254734c4693b418dd8a0d8e77063914a9de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate a pri file for public and private interfaces, but map CONFIG +=
internal_module to a cmake option and skip the former if set.
Task-number: QTBUG-75666
Change-Id: I3f4baf1277094f4c22149a9e8769734baf9a235f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Enable building androiddeployqt when performing host builds only.
Added QtPlatformAndroid.cmake to locate Java and the setup the
android SDK platform when building on android.
Install the androiddeployqt support files when performing a host
build.
Added ANDROID_SDK_ROOT configuration variable for specifying the
android sdk directory.
Generating the deployment-settings.json will be done in another
change.
Change-Id: I1bf15315af4ed904d2fb1d22b0e8e834df32d6ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Mimic the behavior in the qmake build system, and by default build
tests for developer-build, and not build it for a normal build.
To do this, we define BUILD_TESTING with the right default before
including CTest, which does otherwise define the option itself.
Change-Id: Ifa1b1156477919abc1e916ccd9e1e0a74e969ee6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
for modules, plugins and tools only (i.e. no tests nor examples)
this mimics the qmake behavior
default value is developer_build
Comes with some fixes in qmake since it seems in the qmake built it was
not having Werror, now does because we built it with add_qt_tool
Change-Id: I6f3237f25a6fedefa958644929e90f13837a12df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This mirrors what happens for qmake. qt_plugin.prf does not
define these, but qt_module.prf does.
Change-Id: I742d3c766f6f4bd129fa6ccf85b5a67c6758e819
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This was added to the qmake build system in 220028d37c
Change-Id: Ieee8b4d47b8f9716c14c85cf3038f1074ee8c46a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
targets. This created issues when trying to build standalone examples.
Change-Id: Iaaea2b537793ae25fbf3143cc205574446aa4ad1
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
The WrapPCRE2 package handles the PCRE2 packages that have targets,
and reuse them.
Change-Id: I24b0b51f507703cd8287f845f7e425f62dd2c3d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise when compiling qxcb-glx-integration we would get a warning like
<command-line>: warning: ISO C++11 requires whitespace after the macro name
because -DQT_BUILD_QXCB-GLX-INTEGRATION_LIB is not a valid define name
Change-Id: Ie8cef93a47b14d75eaad77893f7182e1514dd616
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We introduced WrapOpenGL to link against either desktop GL or GLESv2
depending on the GL feature in QtGui. This works "fine", with two
caveats:
(1) find_package(WrapOpenGL) must be called after
find_package(Qt5Gui) in order for the feature check in
FindWrapOpenGL.cmake to work. That's error prone.
(2) More and more places are popping up, in particular examples,
where GL linkage is required due to inline functions in Qt that
forward to GL functions - such as on Android.
This in particular explains the qmake behavior of making the GL
linkage (desktop _or_ GLES) a public dependency of QtGui, so only
Gui linkage is required.
Those two aspects combined are the nail in the coffin of FindWrapOpenGL
and it would seem much easier to simply make the Desktop GL vs. GLES
decision once in Gui's CMakeLists.txt and let Qt5GuiDependencies.cmake
propagate this well. This allows us to get rid of plenty of special
cases as well.
Change-Id: I3a7e8af49537ce5f215f24470e075a4ae9aeb944
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some features check for module / target existence. Adapt conversion
script to handle that.
Reland after fixing it.
Change-Id: If4fb942c2e0d16e76a0b9b767bf478527851b0f7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In particular, Qt targets extended with other qt targets
(eg. Qt::VulkanSupport or Qt::LinuxAccessibilitySupport)
after the first add_qt_module were not taken into account when generating
Depends files.
Note that this patch updates the minimum required version
to CMake 3.15
Change-Id: I747deedd4d59e385876bc1a834ef9bdb6078911b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It breaks some conditions, and then the build fails not finding
some private header files in qpa, etc.
This reverts commit 35dc8f496d.
Change-Id: I1b51eac06fe9186181d3f0a7c78f22da7be534e2
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some features check for module existence. Adapt conversion script
and QtBuild feature condition parser to handle that.
Change-Id: I063e49a6fe9f8e9cf3aec985fd78ed4430398586
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
so they are actually set for all the targets
and that the code is a bit simpler
Change-Id: I2cd253d0a3cec3f482b868f81e852edfa158d3f1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This fixes the build when building qtsvg, qtimageformats, etc.
Amends 0900298d46
Change-Id: Ie732ef6faa99e2ebe7e8da6ee2aa5fc0cf59d3f3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
when largefile feature is enabled, in qmake world
this came from largefile.prf
Change-Id: I064da31328ad46157354c7012c7b8397c558cd1d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Until we have some convenience in place, it is strictly necessary to set
the NDK API level, otherwise the libraries from vcpkg are statically
built against a newer libc headers than what we finally link against.
This also means that we can remove the manual libc linkage again.
Change-Id: If1f2eec4df5ed800ac6b060561edff89236891e9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
CMake will complain if you try to use a plugin in target_link_libraries,
and it won't produce import libraries on windows, or use .so.number
on Linux.
Change-Id: I6f0cf8267b3c0e6e5c888703596afe59b3a39141
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The plugin dll files were missing from install_dir/plugins/
Change-Id: I68655faf949e4b8fcab153c6c9b8ee14d3ad8ecc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
We can't use the gold linker with the android NDK, which is the default
option. Using the gold linker results in linker crashes. QMake builds
also disables the gold linker.
Change-Id: I73de93150b160b4411715007bc7e40238b96d400
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When qt_parse_version_string tries to parse the compiler version into
separate fields, it tries to accommodate for different number of digits
separate by dots by checking the length of the list as it is mutated.
Unfortunately the length variable is not a live variable, so after
removing an entry from the list we must change the length variable
manually.
Change-Id: Ieaeb091581484e8c723fbb467697f73036e64ec9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Dlls were missing from the install_dir/bin directory.
Change-Id: I0b5ef685b779c91969bbfa877f226be2060f6e56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In order for test lib to locate the file requested via QFINDTESTDATA, it
needs the build directory of the test (for example
$builddir/tests/auto/foo/bar) and __FILE__ expanding to a path to the
source relative to this build directory.
With ninja, __FILE__ is a path that is always relative to the top-level
build directory, not the per-test case one. Therefore the path
resolution in testlib fails.
To accommodate this, add_qt_test() now always sets QT_TESTCASE_BUILDDIR
as well as the newly introduced QT_TESTCASE_SOURCEDIR, which, as an
absolute path, removes the need to use __FILE__.
Change-Id: I16c2b0001e38162e6da9fdb1a61f4f8ce634fe46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Hunter has recently added aliased target names that conform with upstream
CMake find module target names.
Extended the WrapFreetype to work with Hunter's freetype (lowercase) package
name.
Change-Id: I0e25f342c6930658f07f05d2e6a58cf94d2d168d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For the android platform library add dependencies on liblog and libc
for every Qt target.
The libraries are shipped by default in the Android NDK so they will
always be present.
Change-Id: Ic4a13be32118710b11effabfb16e27bd2d10809f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit introduces infrastructure work to allow static builds of Qt
to handle importing of plug-ins.
Change-Id: Ife0ca3ca7276ea8ec96fe0eb6adf934fad7620ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Need
qt_find_package(X11_XCB)
in src/gui/configure.cmake since we're using it in the file
qt_feature("xcb_xlib" PRIVATE
LABEL "XCB Xlib"
CONDITION QT_FEATURE_xlib AND X11_XCB_FOUND
)
Need
qt_find_package(XRender PROVIDED_TARGETS PkgConfig::xrender)
in src/plugins/platforms/xcb/CMakeLists.tx since we're using it in the
file
extend_target(XcbQpa CONDITION QT_FEATURE_xcb_native_painting AND QT_FEATURE_xrender
PUBLIC_LIBRARIES
PkgConfig::xrender
)
Use capital XRender in pkgconfig to be more consistent on how XRender is
called everywhere else
Change-Id: I403ead2cc123b08f741c5142f20db88987657ba8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's needed when building QtQml on Windows, otherwise
compilation fails.
Add it as a private define for every module being built,
as it is done in qt_module.prf.
Change-Id: I1e322d1da15adea8b3f037a722b3260a552dfb62
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
qtdeclarative has a few conditions that check the gcc version
via variables like QT_GCC_MAJOR_VERSION.
To handle that, parse the CMake compiler version using
qt_parse_version_string() into separate variables like
QT_COMPILER_VERSION_MAJOR, QT_COMPILER_VERSION_MINOR and
QT_COMPILER_VERSION_PATCH. We can then map the conditions
appropriately.
Also, handle isEqual(foo, bar), which is equivalent equals(foo,bar).
Change-Id: I74575c733b44f1f42451e00038b3f113fd353915
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This var needs the cmake namespace as prefix.
Follow-up commit of c5e2838b64
Change-Id: I595306301313b1ff911134776480d28b3194bcf8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
