QVariant::UserType does not correspond to an actual type named
"UserType". This logic didn't make sense.
Change-Id: I369911e514f7902fc863cb05174011d6fc15c447
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
These functions are no longer used, as the counters have been moved to
QTestLog.
Change-Id: I7cd13fc92a18920706fcc712804c304f9c333969
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The strange indentation has made maintenance of license headers
difficult on several occasions.
Change-Id: Ib29a7e5275e2c7a2c13a3f32fd2479f34d3353ca
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The intention is to add additional pause modes over time, this will
be easier if we can just test if a particular reason for pausing is
turned on. If we don't do this we'll end up having to check for each
enum value every time we check what is enabled.
Change-Id: I6b08f0e819b5593e3f6463c3dd175eff8625e155
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
The QDnsLookup class provides asynchronous APIs for performing
DNS lookups. For now, the following lookups are supported:
- A and AAAA
- CNAME as defined per RFC 1035
- MX as defined per RFC 1035
- NS as defined per RFC 1035
- PTR as defined per RFC 1035
- SRV as defined per RFC 2782
- TXT as defined per RFC 1035
Task-number: QTBUG-10481
Change-Id: I46c1741ec23615863eeca3a1231d5e3f8942495e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previous type of QVariant::Type does not allow for custom types.
While technically source incompatible I found no re-implementation
of this class in qttools or qt-creator (most likely to use it for
property editors). The virtual methods are not needed because
registerEditor is all the API that is really needed.
Task-number: QTBUG-1065
Change-Id: I2a9c578c444a80359416f2224a0ee03903bfe779
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Can be used by views to indicate whether a drop is allowed (eg
adequete permissions in a filesystem model).
Change-Id: Iefedb5399e44c8edc5f5df1403c8d5c0da618612
Reviewed-by: Peter Penz <peter.penz19@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qstring.h:648:70: error: declaration of ‘size’ shadows a member of 'this'
Change-Id: I96d2a5b1201b53b11d23bf194b89fa8967b9e25d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This would be a silent behaviour change and is not particularly needed.
Change-Id: Iee1e48408e605d671dfe0402880df3c93a14a8c7
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the bottom corners shouldn't be filled.
Change-Id: I8be1c7a712225fe101b775ea04a8c2fc29e4e9da
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jens Bache-Wiig
setSectionHidden called with (logindex, true) will
sometimes prevent a (correct) call to
resizeSection(logicalIndex, 0).
This seems a bit odd - however it does execute
d->doDelayedResizeSections().
Therefore the section is going to be hidden later.
However it is a problem that the length meanwhile is wrong.
(That is a value that is not the sum of the sections)
This is fixed by execute updates before returning the
length.
Task-number: QTBUG-14242
Change-Id: Ia1d2f6db3213792b250a6a37942b56554261cd3a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed function was just a wrapper around QTestLog::ignoreMessage()
and was only called twice (once in qtestcase.cpp and once in
qtdeclarative). Better to just call the desired function directly and
avoid the indirection.
Change-Id: Ib900f35f5d584e8f323cef9b0e7b4f8a507c199e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The type was removed long time ago. It has type id 63 which currently
is unbound, but potentially can be reused in future.
Change-Id: I099997c9bae93ce52ba8c46275d6267c25dee4ca
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
File system cached metadata can't be trusted when custom file engines
are in use, because the custom file engine may want to override the
metadata. (e.g. present an archive file as a directory)
Therefore, check if a file engine should be instantiated for each
result in QDirIterator. This is a fast check if no custom file engines
are registered.
When pushing a directory (using QDirIterator::SubDirectories) the
file engine needs to be instantiated also.
Task-number: QTBUG-23688
Task-number: ou1cimx1#965023
Change-Id: I0114c8df6258535553783a2486131c4194926649
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
(cherry picked from 3864ad09d578210b52e5f58fca2ee8a1144f5be2)
Q_STATIC_ASSERT as condition should accept anything cast-able to "bool".
Change-Id: Id76992080f9bb84d3a16b80adffc656d52eca91d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
In QMetaType "void" is a regular type, lack of c++ sizeof operator
force us to write a template specialization for the type.
Change-Id: I9a56e135223b416b8031836d29ef33ef3fb750e4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Logic has a flow causing null pointer call during destruction of an
instance of a custom type in bootstrap mode.
The patch doesn't include autotests, because we do not test bootstrap
mode.
Change-Id: Ie70c6f4226cb604f094513621d96a560e84502d7
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
In newer versions of maliit a per session abstract socket for
communication between maliit server and input contexts is used. The
address is published over the D-Bus session bus as address property in
the org.maliit.Server.Address interface of the
/org/maliit/server/address object at the org.maliit.server service.
Fallback to old socket when org.maliit.server service is not available.
Task-number: QTBUG-22982
Change-Id: I1b2cdd0c804d3d625e18b4958dd60008ea289d91
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
These types don't exist anymore, so it's pointless to check for them.
Also remove the dead types from uic's type-to-header map.
Change-Id: I7f0af5c337859f3da1c103157a802bbe5372df9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some objects expect connectNotify to be called in order the signal to be
emitted.
Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The C++11 std::atomic type is very close to our API, to the point one
has to wonder if the committe was inspired by it. It provides all of
the memory semantics that Qt requires and more, plus some
compare-and-swap operations that we don't use.
The idea of returning the actual value in the event of a failed
compare-and-swap is actually quite good, as often we'll retry with
it. We just couldn't come up with a good name (fetchAndTestAndSet?).
The C++11 atomics require that the compiler support constexpr as well,
since std::atomic itself isn't required by the standard to be
trivially-constructible (in fact, it has a constexpr constructor in
the standard). For that reason, we need constexpr so we can add a
constructor to QBasicAtomic too.
Change-Id: I12c51455ba73350a6f7501aacc2ca7681c4369dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
With this implementation, we can have Qt run on any architecture that
GCC supports without having to write specialised code. However, on
some architectures, the code that GCC generates is not optimal: it
uses locking on ARMv5 and it's always fully-ordered. For that reason,
it appears after the Qt native assembly implementations (it's a
fallback, not an override).
Since they all have fully-ordered memory semantics, we define only the
xxxRelaxed functions. The exception is __sync_lock_and_test, which has
acquire semantics, so we need to define the Release and Ordered
versions too.
On some architectures, GCC can support atomics on types different than
32-bit and pointer-sized (like x86, x86-64, ARM and even
MIPS). However, there's no standardised way of telling: GCC seems to
define __GCC_HAVE_SYNC_COMPARE_AND_SWAP_{1,2,4,8} if those operations
are present, but I couldn't find it on the ARM compiler (it was there
for i386, x86-64, IA-64 and MIPS).
Change-Id: I55ff7a7c0cfc6388b7ad8e2c0dedecffdf2a3e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It was put in source tree before.
Task-number: QTBUG-20439
Change-Id: Ib52d9c2e83ae375aad259ddc74138bbc728b3ed0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Per ### Qt5 comment and the fact that it was already virtual on
QAbstractSocket.
Change-Id: If2d2b2f9cdec1ef4c5bf625e3ce0d6f2d9a7bdfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is better to use QMetaType::type because it works well with custom
types too.
Change-Id: I30bc70d16b2aad4ba22682de1c215b917e64209b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tr() methods are unrelated to the "meta" part, so disabling them
with that macro is not the proper way. They were originally included to
make static checks for string translation simpler, but it just results
in duplicating the definition every time QT_NO_META_MACROS is used.
Change-Id: I29eb9b83a09e1fd6c66c85c9e4ff23d8dbe65f15
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setEncodedUrl() isn't necessary anymore now that setUrl can handle
encoded (and partially encoded) urls.
url() is added for symmetry with setUrl().
Change-Id: I4e671482a5635a86797421ca50882db9cd60d852
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes round-trip bugs. People expect to be able to do
QUrl u(...); QString s = u.toString(); QUrl u2(s); and have u==u2.
This was not true for paths containing a '#', for instance, which would
be parsed back as a fragment. The solution is to make toString output
partially decoded data (more readable than toEncoded, but not decoded
to the point of changing the meaning, if parsing it back later as a
QUrl), and to make the QUrl constructor work with partially decoded data.
Change-Id: I013c01e8947d538435f3c20fc4ec57cd9ccbba6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Extra ; after namespace was causing build failures with -pedantic.
Change-Id: I340252810a04815820964c625377a1dc0635783f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
$publicclassregexp specifies the prefix for Qt classes in a qt5 module. For example
in QtJsonDb all classes have "JsonDb" prefix and forward include headers were
not generated properly - e.g. "jsondb-client.h" was generated in the include
folder, but "JsonDbClient" (which matches class name) was not.
Change-Id: I6b57a799d926254e2ab3fd00fa6e38f95b8eb96c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Added a bit of documentation to the Java-like hashing function.
Change-Id: I3f44eee305d91b76f0f89cd1acf21f6430b9482b
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Change-Id: Ib5abc171fb8fb70e2f73ac92ca22dc09146d8a55
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
- Use an enumeration for the dialog type.
- Implemented on Windows and Mac
Reviewed-by: Morten Johan Sorvig <morten.sorvig@nokia.com>
Change-Id: I213748a08168efbabc2ac0106308e97ff19d19c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Check the device type pof the painter passed in.
- Introduce convenience functions for retrieving the DC for
widgets that default to the top level.
Change-Id: I18a8db02c8ffd7a249310a5ffaf3a530f0a3df40
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Do not delete screens in the destructor as this might call
back to the Windows and use QWindowsContext.
Change-Id: I5e66e480d4b6ddb8b17cc92e4bef93013e336be6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt::UnknownOrientation is now Qt::PrimaryOrientation.
Change-Id: I2846a90bd11ecd1416c29b7bd861f180ccb129a1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
