This patch amends a62f1d0356.
If the initial backing store resize request is called with QSize(0, 0),
we end up with QXcbBackingStoreImage holding a default contructed QImage / m_qimage.
This happens because of the logic in QXcbBackingStoreImage::create(), where
if we detect that the requested segmentSize == 0, we do not allocate
any memory, and thus don't create a valid image in m_qimage. On subsequent
call to QXcbBackingStore::resize() we would only check if QXcbBackingStoreImage
object has been created, but not if it is in a valid state. This obviously
would cause problems.
This patch re-factors the logic to handle better resize to QSize(0, 0). And
make the code cleaner by:
- merging ::create and ::resize as semantically it is always resize().
- dropping unnecessary argument passing.
Task-number: QTBUG-69581
Change-Id: Ied337beb449dea8259fcf6b7d29f0a5bd553019d
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The value of 'tos' at the check might already be on the last element,
so triggering stack expansion on the second last element is too late.
Change-Id: Ib3ab2662d4d27a71effe9e988b9e172923af2908
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For some reason, the GLib event dispatcher was lowering the priority for
timers compared to other events like for example socket events.
the IDLE priority is for "Do this later when you are not busy", and that
is wrong for generic timer events.
See also https://bugs.kde.org/show_bug.cgi?id=230184
Task-number: QTBUG-48344
Change-Id: Id337a8f0c7fad3ebd5e5fa49d7831a0001ea9010
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
IBus clients cannot access the IBus socket path in Flatpak and
need to watch the D-Bus disconnection.
Change-Id: Ida1a5ce4fe112c1c4f8855ec886e74f2cbdcc8a0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the global flags are deprecated in favor of per-library paths, but they
obviously should still work. but apparently no-one cares, because there
isn't even a bug report about it ...
amends 90eee08b3.
Change-Id: I85aee41ca11de1715d1c750ae8e663093e012fb7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When showing line and paragraph separators at an offset from the start
of the string, the end of string pointer would be incorrectly set, and
we would read past the end of the string. If any part of this memory
happened to match the line or paragraph separator, then we would
overwrite it and have a crash.
I couldn't find any reliable way to test this, since the crash depends on
the contents of the memory after the string allocated by the algorithm.
But with an overflow of 100 000 characters, I found that it crashed every
time I ran the test.
[ChangeLog][QtGui][Text] Fixed potential crash when using
QTextOption::ShowLineAndParagraphSeparators.
Task-number: QTBUG-69661
Change-Id: I17d1996b883560bacdc7ce114c8aeb2b0108faea
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Michal Lazo <xlazom00@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Until we can properly fix QPalette and QMacStyle,
we should disable dark appearance in Qt applications.
Disable by setting NSApp.appearance to Aqua, unless
dark mode support has been requested via Info.plist
or environment variable.
Read the NSRequiresAquaSystemAppearance Info.plist
key, don’t set NSApp.appearance if its value is false.
Also check the QT_MAC_REQUIRES_AQUA_SYSTEM_APPEARANCE
environment variable and apply similar logic. You then
enable dark mode support by setting:
QT_MAC_REQUIRES_AQUA_SYSTEM_APPEARANCE=0
which is slightly awkward, but matches Info.plist
behavior.
Task-number: QTBUG-68891
Change-Id: I86dc6cf3dee951d46c953396c57d2c31f2e4afcc
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This change keeps the compatibility with old gradle.
It is needed for projects that must use the old gradle version.
src/tools/androiddeployqt/main.cpp was moved from qttools into
qtbase in 5.11. So re-apply c03f5673 in qttools here.
Task-number: QTBUG-69755
Change-Id: I2399d445f8208766e4185d717bb51f1317fdcc00
Reviewed-by: Volker Krause <volker.krause@kdab.com>
(cherry picked from commit e2f4193112)
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
For single config mode (no debug_and_release) extra compilers wouldn't
get added to the vcxproj file.
Single config mode creates a temporary project, and that was incomplete.
Multi config mode, on the other hand, directly operates on the "real
data" and wasn't affected by this problem.
Task-number: QTBUG-69769
Change-Id: I9cd942e43d80adbeac9a3c8fbe1a5766bc9645a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Turns out that there are two files and while a lot of distros symlink
one to the other, some distros lack the one in /etc.
[ChangeLog][QtCore][QSysInfo] Fixed QSysInfo::productType() to properly
detect some Linux distributions that ship with a minimal /etc.
Change-Id: Ia741b559c24d46c78fb2fffd1548cab414037220
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We haven't yet run the configure checks to see if statx and renameat2
are present in glibc, so this fails when we redefine the structures and
functions.
linux/stat.h:56:8: error: redefinition of 'struct statx_timestamp'
bits/statx.h:25:8: note: previous definition of 'struct statx_timestamp'
qfilesystemengine_unix.cpp:110:12: error: 'int renameat2(int, const char*, int, const char*, unsigned int)' was declared 'extern' and later 'static' [-fpermissive]
Change-Id: Ia741b559c24d46c78fb2fffd1548a792d22e3368
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Following commit 35ce6247 in IBus, IBus input plugin now connects to
session bus and use IBus portal to create input context when running
in Flatpak environment or IBUS_USE_PORTAL is set.
[ChangeLog][plugins][ibus] Support IBus portal. Qt programs in Flatpak
environment can now trigger IBus input method.
Change-Id: I561f5f873d709b8abeae554d804daa058f9f6e16
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Takao Fujiwara <takao.fujiwara1@gmail.com>
Generated C++ source files with extensions other than .cpp would not get
compiled, because the code ignored all other C++ source extensions like
.cc and .cxx.
Fix this by respecting the value of QMAKE_EXT_CPP and QMAKE_EXT_C.
Task-number: QTBUG-69770
Change-Id: I097dfef6920e353a351c97891cdbfdc9a859815f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If there's no background, we should copy the backingstore, so that the
backingstore is not blended with the result of the previous flush.
The unified toolbar case is covered by the window having a textured
background.
Task-number: QTBUG-69773
Change-Id: I2f4eed9f44a60ebe7495ce68cf5a54d3d2424b0c
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
According to MS sample code, MSAA requests should be replied with
UI Automation providers to enable the use the UIA-to-MSAA bridge, in
order to support MSAA-only clients. Also changing the mapping of
QAccessible::Client from UIA_CustomControlTypeId to UIA_GroupControlTypeId,
as it seems more appropriate and avoids an incorrect mapping to a push button
type in the UIA-to-MSAA conversion.
Change-Id: I5149d250da2d1bd7b14b44ca46e856a81c9be045
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
qt creator's clang code model is a bit more picky than the old one, so
we need a project that approximately works.
while we're at it, inline qmake.pri, add some missing files, and
beautify the source lists.
Change-Id: I87ca1db2ee3e55ea08e4c23f7913e882ab44fd21
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The character 'g' is only a valid format when converting numbers
to strings, but not other way round.
Change-Id: Ie772886e7a45a5067c0a3e4eaa3a6ccef8e69426
Reviewed-by: Martin Smith <martin.smith@qt.io>
Since image files easily can be (or corrupt files claim to be) huge,
it is worth checking for out of memory situations.
Change-Id: I635a3ec6852288079fdec4e14cf7e776fe59e9e0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It's stale. Thanks to Olivier B. for pointing out.
Change-Id: Ie01831ddac5446fdbdeefffd15463530818cff9e
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
the cherry-pick is needed to support QtWebEngine 5.12 with Qt 5.11,
a requirement that was raised too late.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 95b0e4c956)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Remove () from links to QGuiApplication link names. The link targets
QGuiApplication, and the syntax Q(Gui)Application to suggest both
QGuiApplication and QApplication seems unnecessary, as QApplication
derives from QGuiApplication anyway.
* Move added in version line to the bottom of each entry that contains
said line for consistency.
* "was added in" > "has been added in"
Task-number: QTBUG-56077
Change-Id: Ife93acb7936ff9f0d3af2f2f456ad0db95419797
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
A typo meant the color-table was not fixed. For safety fallback colors
are also made opaque.
Change-Id: I3e609882177604910c4343c86f00221a89af9078
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The fast image blending is only used for SourceOver composition, but
several of our embedded backends make heavy use of Source composition
which doesn't have a short-cut. This patch adds a blitting short cut
that works in those cases.
Task-number: QTBUG-69724
Change-Id: Icc61a67cc27bc83863153d69cae60dd986d26f69
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The rest of the RGB64 routines were optimized, but the loading of RGB32
was not as it was originally not used much, but with ARGB32 using the
RGB64 backend, it is essential for decent performance.
Task-number: QTBUG-69724
Change-Id: I1c02411ed29d3d993427afde44dfa83689d117e0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Set the Z-order to HWND_BOTTOM in that case.
Add a doc note stating that it only works for frameless or
full screen windows.
Task-number: QTBUG-53717
Change-Id: I7abf219a88aac715c51d27d925504da9e91b56f1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The ppm format specifies that the maximum color value field must be
less than 65536. The handler did not enforce this, leading to
potentional overflow when the value was used in 16 bits context.
Task-number: QTBUG-69449
Change-Id: Iea7a7e0f8953ec1ea8571e215687d12a9d77e11c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It appears that by default our keychain auto-locks when the
system sleeps. This makes the keychain totally useless, since
its password is a random 256 bytes our user never has a chance
to know. Thanks to Mårten for the hint about SecKeychainSetSettings,
the way to properly fix it.
Task-number: QTBUG-69677
Change-Id: I2603c26b8422a1bcace3336e9b4ebe0381c952d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The width of the icon was subtracted out of the available text area
width even when the value of the `decorationPosition` was Top/Bottom.
Task-number: QTBUG-69404
Task-number: QTBUG-30116
Change-Id: I501ffc0dab0cff25e525c26adf9bdb060408927b
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Some distributions do not define MINGW_HAS_SECURE_API globally,
resulting in methods like wgetenv_s not being declared in the
headers.
This is probably to keep compatibility with Windows XP. Anyhow,
we don't support Windows XP anymore, so we can safely add the
define.
Note that this is not necessary for the mingw-builds distro,
which is the only one we test and support. Anyhow, I don't
see any risk in adding these for other distributions.
Diff was provided by Philippe Dunski in the bug report.
Task-number: QTBUG-67443
Change-Id: I3a64b11541fe95e527ed44bbf8ad94469d457d3d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use platform window directly for setting a mask to prevent bitmap
scaling if pixmap and window DPR are the same.
Amends: 42f788ffe2
Task-number: QTBUG-61948
Change-Id: I5eec85c01f20bdefff7343e83ff10cbcb2c79508
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The logic seems to be incorrect (or the naming is misleading): it
only adds 'appMenu' if it was found in the previous 'mainMenu',
failing otherwise. Consider the following example:
while (true){
QApplication app(a,b);
MainWindow w;
w.show();
app.exec();
}
It's quite a contrived but apparently allowed API use (OP claims
they have to switch languages in their app). The main window and the
app are destroyed, so is the menu bar. Then a new main window is
created, with a new menu bar. Now the current [NSApp mainMenu]
(the one set after we deleted the previous) does not have 'appMenu'
anymore (we removed it when initializing the first menu bar).
So as a result we have app menu missing and add new menus/items
to a wrong menus/at wrong index.
Change-Id: I64fce766d6c12ebf7ae12bb94af41c8c1de3d78b
Task-number: QTBUG-69496
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
They said "By default, this function is case sensitive"
but this makes no sense when you're using a regexp for searching,
the regexp is case sensitive or not by itself, QStringList does
not influence that.
Change-Id: I7446cb52a9f915c6551af6046ce89cbc8bab96ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After trying to fix (work around) system resize/move issues in various
ways from within the platform plugin, it has been concluded that it is a
bug at widget layer and should be fixed there instead: QTBUG-69716.
This patch reverts parts of 3bc0f1724a and disables system move / resize
on XCB plugin. Meaning, QSizeGrip will use its own implementation for
resizing a window.
Task-number: QTBUG-68501
Task-number: QTBUG-69628
Change-Id: Ib4744a93fb3e3c20f690a8f43713103856cb7d1a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
* The plugin IID with version number was removed in transition to new
plugin system, see efde205586.
* This change re-adds the version number, so that we deliver on the best
practices as mentioned in the documentation for the example.
Task-number: QTBUG-59487
Change-Id: I88596e71cf18be88d0b1d28d56b6d3bb72fe756b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The channel pipes are only set up if the channel's type is
Redirect. Fix the conditions accordingly.
This amends commit 7ad55ca6.
Change-Id: Ie8a800fbe2bf9f5f6709b14ba03133b80e9b4bef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Override cursors can be modified externally when for example crossing
window borders. Add helper function to enforce the cursor again to
QWindowsWindow::applyCursor() which is called for enter events.
Task-number: QTBUG-69637
Change-Id: Ibea4da9f2aac81377002b626daae64b1102f6c2b
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
