close stdin and let the process finish right away instead of first
waiting for a reaction (which is not supposed to come) and then
finishing.
Change-Id: Ifcf200eead5ed95217843e105f9d2dbb5398d646
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
§24.4.1 [iterator.traits] of N3337 makes it *mandatory* to define the
various types
std::iterator_traits<Iterator>::{value,pointer,...}
for any given iterator.
§24.4.1.2 makes it enough to define them within our iterator class.
Change-Id: I1305c8392d224889b09395e30ecc77b194020a15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 5b9006bbdb.
Also revert "Doc: Enable documentation for QScopedPointer's rvalue ref functions"
This reverts commit 5f8416ec65.
Adding a move contructor to QScopedPointer makes no sense, because moving
means 'escaping the scope', which breaks the fundamental point of
QScopedPointer.
Change-Id: I4ac1b108bf199af6e436fa1629aa2d3b93c27724
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Layout items with a Preferred size policy would be treated as fixed
size if they were in the same layout as an Expanding item (or one with
a stretch factor).
This occurred e.g. if a layout was configured similar to this:
1. One item with ExpandFlag/stretch but with a maximumSize set,
e.g. (100x100).
2. Another item with 'just' GrowFlag, and a maximum size bigger than
its size hint.
If the above layout was resized to e.g. (200x50) it would cause the
expanding item to correctly get the size (100x50), but the 'growing'
item would not stretch beyond its size hint.
Instead, it would distribute space around both items, behaving as if
the 'growing' item was fixed'.
The expected behavior is to continue to grow the 'growing' item after
the expanding item has reached its size limit.
Task-number: QTBUG-33104
Change-Id: Ie410653d905f7ca4d702528dafb269f30a0e4f61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Currently there is no API to extract the meta data
from static plugins. This is needed in e.g QtDeclarative
for loading static module plugins.
This patch moves the 'staticPlugins' function from
QLibraryPrivate into QPluginLoader, and makes it public.
As such, we now also export QStaticPlugin.
Since an application developer cannot do much with raw
metadata, we add a new function
QStaticPlugin::metaData() that returns the QJsonObject
for the plugin. The old metaData function is
renamed 'rawMetaData'.
Change-Id: Idb0bf9ad8ebb13340565512e1998b26e762a357e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a new method to return the time zone abbreviation for the current
time spec. For LocalTime this is the abbreviation returned by mktime.
This new method will later be used in changes to the date formatter
and QTimeZone.
Note this change does not implement WinCE support.
[ChangeLog][QtCore][QDateTime] Add method timeZoneAbbreviation() to
return effective time zone abbreviation.
Change-Id: I265a5e96c72eb7236974f80f053f1fb341e3c816
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The implicitConstruction() test case will fail to compile if QCursor is
unavailable.
Change-Id: If26743995505a48da648a2fa2a498debec91c933
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When we auto resize it is handy to be able to limit the maximum
size (just like the minimum size).
[ChangeLog][QtWidgets][QHeaderView]A maximumSize for sections
has been introduced. The maximum section size is by default
the largest possible section size which in Qt 5.2 has been
limited to 1048575 pixels.
Task-number: QTBUG-4346
Change-Id: Ida9cbcc11bd5c4498e319df2e6379c69a7033c04
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QCheckBox cycles through the 3 states, but item delegates didn't
do that.
Change-Id: Iad1e464341033ca357925fe8064f53bb584459f4
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QTEST_NOOP_MAIN was removed in Qt 5, but was still in the source of the
QProcessEnvironment auto test.
Change-Id: I0048c330c9d4e99c46192cc05ffd3b77d404fb6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Since Qt5, the QMetaObject do not contains the string name of the
builtin types, but only the QMetaType id. QMetaMethod::typeName
convert back from the id to the string. But if the type is aliased,
the string of the main type is returned.
This was the case for example for qint64 which is transformed to
"qlonglong".
This causes a regression in QMetaType::invoke when trying to invoke a
method which return an aliased type, since the string comparison would
fail.
Fix the problem by also comparing the metatype id.
Changelog: QMetaMethod::invoke: Fix return of aliased meta type
Task-number: QTBUG-33222
Change-Id: Iec7b99dcbf7b23eb818de74f413e4451ce510ac4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The new Cocoa event dispatcher made apparent some deficiencies in the
way the dialog helpers were being hidden. In particular, we would not stop
a dialog helper's modal loop when closing the dialog, resulting in the
auto-tests hanging. Also, since the QApplication event loop is runnig with
[NSApp run] in the stack, the previous workarounds are no longer needed.
Task-number: QTBUG-24321
Change-Id: Ifba713c286638d78a699c319a15683d09714f06f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Currently just a convenience method for setNameFilters(), it uses
QMimeType to create a name filter from the glob patterns and
description defined in each MIME type.
In the longer term, this API could be used to do proper mimetype-based
filtering using QMimeDatabase::mimeTypeForFile() in the builtin
QFileDialog (aka "not native"), instead of only looking at globs via the
name filters.
Change-Id: I0edccf5f30c514481b47cd100d743d1ed7a24024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
(dacf9961da)
In order to see 2 active threads, we must check activeThreadCount() before
the runnable finishes.
Change-Id: I1a48b41e0c1fd81a65d915b9bd1e741ff267ed2b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This extends the QLinkedList auto test. This is copy paste
with small edits from the QList auto test.
Change-Id: I5bce7ee304998d1c7258f11b2f31a7fb87706936
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The test was re-using a main window and menu bars for all tests,
clearing and repopulating them. Rewrite the code to be able to
use menu bars and windows on the stack separately for each test.
Change-Id: I13ab31b26b70bc8537e8d8ab164051b3197cd68e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Done with Jan Arve
Task-number: QTBUG-33104
Change-Id: I8319748536d448d1c37a26527ced53156d8c2f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Try to stabilize doubleRepaint and others, try to get them away
from taskbar areas.
Change-Id: Icae8da575999afccb314edafd7deb16446e3d1c2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
This test works with no Qt version (4 or 5) when testing with the
Squid (HTTP proxy) version deployed on the new test server image.
Task-number: QTBUG-33180
Change-Id: If244526a4baed9f3836dade007fe0f15649a8f86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl("http%3A%2F%2Fexample.com") has only a path of
"http%3A%2F%2Fexample.com". In Qt 5.0 and 5.1, the %3A would get decoded
to ':', which in turn makes the URL invalid (colon before first slash).
Found via discussion on the interest mailing list.
Change-Id: I7f4f242b330df280e635eb97cce123e742aa1b10
Reviewed-by: David Faure <david.faure@kdab.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This may happen when we have namespaces and the qualified name is used
to scope an enum.
Task-number: QTBUG-32933
Change-Id: Ic4923bbfb138387bae1e3694172661ace8342089
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moc's C++ is not 100% accurate, so better process the invalid macro with
a warning rather than an error.
Such errors occurred in the QSKIP macro with variadic arguments since
that macro is defined conditionally.
It is also causing problem in boost header (cf task QTBUG-29331)
Task-number: QTBUG-29331
Change-Id: Ice6a01b675286540d6470c8e36920b7efd39b540
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The current question is whether activeThreadCount() should be lock-free
(using atomic ints) or mutex-protected, so this tests start()
and activeThreadCount() directly.
Change-Id: Ica4a2ad023c2002e3c7d81558e6b9ee64af7f690
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In delegates we get into trouble with calling showPopup in
setEditorData (edit by double click) - and that is not reasonable.
The user has requested edit - and therefore it is natural to save
a click for the user and show the popup at once.
However that fails since we have the mouse down and as soon as we
release the mouse we will call hidePopup.
This patch ensures that the mouseReleaseEvent, that caused the
problem is only considered if we have had a mousePressEvent.
Change-Id: Ibe031fcb9ad2158f6969e41127bbb5f651b9cae6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
... supported on the new test server. Once the new server image is in
place, we can only allow for the new life time hint of 300 seconds.
Task-number: QTBUG-33040
Change-Id: Id6ad9983789cc6badf3fc2f6628bf79379988201
Reviewed-by: Richard J. Moore <rich@kde.org>
The unit tests were caching the original TZ value to restore later
after testing with different TZ values. The problem is reading TZ will
return a null value if no override TZ value is set, and if you then set
the TZ to null the system assumes UTC and not the system time zone.
Instead we need to unset TZ if it was null to start with.
Change-Id: Ib0625b1712e565f9fdfa99e2ffe1e5d74f059354
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
use the new parser flags to report all i/o errors directly.
as a notable side effect, the "WARNING" prefix is gone (even though
it is still treated like that, which is mildly insane to start with).
Change-Id: I084375d5e7a3314ae763795f7c318804a9fb84b6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows platforms to dynamically alter their keyboard
shortcuts, for example if they are user-configurable on that
platform. Current behavior remains the same.
QEvent previously used the hardcoded values in QKeySequencePrivate so
this was modified to use QKeySequence::keyBindings().
In order to keep the speed of QEvent's former binary search, we moved
this code to QPlatformTheme::keyBindings(), making it faster for all
keyBinding lookups.
As we now need to search by StandardKey instead of by shortcut the list
is reordered and a test is changed to reflect that.
Change-Id: Iefb402fbbe8768be2208ce036f3c2deed72dcc6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Currently the default for QSplitter::opaqueResize is hard coded,
which is less than ideal. Instead this should be provided as a
style hint via QStyle so as to give a more uniform look to all
applications.
Change-Id: I5711811f7b672e36aafcd292ed320308570a0390
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This tests crashes a lot lately.
Task-number: QTBUG-29684
Change-Id: I6892238dc071f050b0208dd5b4843629fa707347
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Created QTBUG-33067 for tracking the issue, after some debugging.
Change-Id: Iaf5556db2e0858e40a7cf6c9dbbe7e6fd6120bac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
Though the worst case memory usage was improved in
b800d8b94a the best case usage changed.
Since best case is the same as worst case in Qt5, we should
use as little as possible, which this patch ensures.
We reduce the memory usage from 3 to 2 ints per section - which is
half of worst case in Qt4. There seems to be no bigger cost in
performance doing that. The recalcSectionStartPos is still very fast.
This patch limits the maximum section size to (2^20) ~ 1.000.000 pixels.
This alleviates
Task-number: QTBUG-32325
Change-Id: I9b7530030a31b4e35cf1ca9e32c6b936f5ea9790
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Sections may be hidden => QStyleOptionHeader::position must reflect the
state seen on the screen. Otherwise styles will give wrong visual
results.
Task-number: QTBUG-32203
Change-Id: I7ef86496be092bf6f52ec45f757b501f38c3a431
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Invoking waitForStarted() on a QProcess before or after an unsuccessful
call to start() (e.g., with an empty command), would execute FD_SET with
an invalid file descriptor and cause the process to abort.
The bug can be reliably reproduced on OSX.
Task-number: QTBUG-32958
Change-Id: Id25b7781168489281645e21571361ca1a71d43e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In this patch we introduce tabBarClicked and tabBarDoubleClicked to get
a finer grained information on the user interaction with the tab bar.
Done-with: kevin.ottens@kdab.com
Change-Id: I7be76a556ca09186e98f2e076fe2512d6c5e6773
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Even though detailed text does not work that well, it should still
be in the manual test.
Change-Id: I051f9f0592ad9206dc42f0e9929c1be32baec832
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Follows a similar include-pattern as the qguieventdispatcher test.
Change-Id: Ie8669a5bc155abd6687e81526f2b95d0d19b009e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A QCoreApplication may run a different event dispatcher, such as the
QEventDispatcherBlackberry, and QGuiApplications will have the GUI
dispatcher provided by the QPA plugin, such as QCocoaEventDispatcher.
Neither support X11ExcludeTimers.
Change-Id: Id5ea1c7dd74a127e13fa4d2eaa9a1bd2715a9dbb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is a flaky test on Windows 8 64-bit, so marking it as
XFAIL if it is expected to fail.
Task-number: QTBUG-30943
Change-Id: Idd276f80b54fcd5cf295a7e1adebcf0020eaa8ca
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
QStandardPaths::enableTestMode has a verb in the imperative ("enable")
as the core word in the name. That indicates an action. The function
should not have had a parameter.
Instead, add a Qt-style setXXXEnabled function.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths::enableTestMode is
deprecated and is replaced by QStandardPaths::setTestModeEnabled.
Change-Id: Ib26ad72d7c635890d2cb22ae9d44cbda08a6f17c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
This is a flaky test on OS X 10.8, so marking it as XFAIL if it is
expected to fail.
Task-number: QTBUG-32690
Change-Id: I0665c7474bb62c4c0a70e4b93cc977e3dbf1e150
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This fixes 4ca4fb93f6
where the fix was right, just in the wrong place.
Change-Id: I3cde24624e3789870f1c16ccb92f78f7fc567fd5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Based on addAction-API.
Change-Id: Ie6c3d2d728b23a85cdd80428c92ee8208ae0a65c
Done-with: Kevin.Ottens@kdab.com
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It has been discovered it changes the behavior of qdbuscpp2xml
resulting in builds of some apps breaking. Even if the
behavior is more correct, such behavior change in a stable branch is
not acceptable
Change-Id: I1d79104ebf11c3f48c84f109be2926af96cddae7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mark some tests as expected failures on OS X 10.8
- tst_QSettings::ctor(native)
- tst_QSettings::ctor(ini)
- tst_QSettings::ctor(custom1)
- tst_QSettings::ctor(custom2)
- tst_QSettings::rainersSyncBugOnMac(native)
Task-number: QTBUG-32655
Change-Id: I54928d991a8ccf300b40747feaa6fda9d124781b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
