This revealed that the test was always broken; it had simply never
actually been checked.
Done-with: Andreas Buhr <andreas.buhr@qt.io>
Change-Id: I85ac7ba30738fa3b41bf8440a059ee3fabb4726b
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Added some tests that trigger an assert without this check.
(Drive-by: renamed one QTime test to match its QDate(Time)? counterparts.)
Change-Id: I3d6767605fdcca13a9b4d43a32904f584eb57cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
QDateTime's addDays(), addMonths() and addYears() neglected to check
for validity before doing their job, with the result that they could
produce "valid" (but wildly inappropriate) results if used on an
invalid date-time. Added tests for this case (and the boundary).
Change-Id: I7b0d638501cb5d875a678cde213547a83ed7529e
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's range of possible values is wider than anyone generally
needs, but let's not do confusing things when someone does overflow
it.
Change-Id: Ifbaf7a0f02cd3afe7d3d13c829bf0887eba29f7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Previously, a QDate representing more than about 0.3 gigayears before
or after the epoch would overflow the millisecond count and produce a
"valid" date-time that didn't represent the date and time passed to
its constructor. Changed to detect such overflow and produce an
invalid date-time instead, if it happens.
Corrected some tests that wrongly expected to be able to represent
extreme date-time values with every time-spec. The (milli)seconds
since epoch are from UTC's epoch, so converting to another offset,
zone or local time may give a value outside the actual range. Added
some tests for the actual exact bounds.
Task-number: QTBUG-68855
Change-Id: I866a4974aeb54bba92dbe7eab0a440baf02124f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Even before adding support for fractional hours, a fraction of a
minute might potentially have represented a whole number of seconds by
a fractional part that, due to rounding, was less than the whole
number of seconds by less than half a millisecond. Previously, the
parsing would have clipped the fractional part at 999 milliseconds, in
the preceding second, instead of correctly rounding it up to the whole
second.
For QTime::fromString(), which can't represent 24:00, and for
TextDate, which doesn't allow 24:00 as a synomym for the next day's
0:0, applying such rounding to 23:59:59.999999 would produce an
invalid result from a string that does represent a valid time, so use
the nearest representable time, as previously.
Added some tests and amended others.
[ChangeLog][QtCore][QDateTime] QDateTime and QTime, in fromString()
with format ISODate or TextDate, now allow a fractional part of the
hour, minute or seconds to round up to the next second (hence
potentially into the next minute, etc.) when this is the closest
representable value to the exact fractional part given. When rounding
up would turn a valid result into an invalid one, however, the old
behavior of clipping to 999 milliseconds is retained.
Change-Id: I8104848d246cdb4545a12819fb4b6755da2b1372
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Previously we used 0:0 on the next day, which might fall in a
fall-back's gap.
[ChangeLog][QtCore][QDateTime] When fromString() reads 24:00 in ISO
format, it now uses the start of the next day, rather than 0:0 on the
next day. This only makes a difference if the next day's first hour is
skipped by a time-zone transition.
Change-Id: Ib81feca5dc09fa735321b6ab76d5d118d6db6fd2
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Previously the ISO time format would tolerate trailing cruft at the
end in various cases even though there might be an offset specifier
after the time, which should *not* be separated from it by anything
(not even the spaces we originally planned to still tolerate).
The RFC date format is forgiving about space, as is suitable for
parsing of RFC-822 headers, but the other formats should match the
handling in QDateTimeParser, which rejects any dangling cruft.
At the same time, since this required a re-write of
fromIsoTimeString() in any case, add support for the ISO format that
gives the hour a fractional part and skips minutes and
seconds. Previously we only had support for fractional minutes (with
no seconds). The hour without even a fractional part is also valid.
Reworked the documentation of Qt::DateFormat as it was wrong in
places, inconsistent in its formatting and incomplete. Adjusted some
tests to match the new behavior. A fraction separator with no
following digits should have been recognized as an error previously
and now is.
[ChangeLog][QtCore][QDateTime] The ISODate and ISODateWithMs formats
now reject trailing cruft (including spaces) at the end of a time
string. They also gain support for parsing hour-only formats,
including the hour-with-fractional-part format.
Task-number: QTBUG-86133
Change-Id: I38ad1479ae033407f7df97ffbeb7c4bcd463d04a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name toSecsSinceEpoch() gave no hint to the fact that the test
was, in fact, *also* testing round-tripping of the ISODateFormat.
Since there are other tests for string conversion, make this a simple
test of toSecsSinceEpoch().
It did the round-tripping via two methods with overly-terse names that
might just as well be local lambdas - now redundant, so removed.
Change-Id: I1e4fb1cc90224312c995596a8f3fe2bc5d9dfa15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Also drop superfluous trailing 0s from QTime's constructor and add
space after commas.
Change-Id: Ie3ae87fd497456d6447c55e5d2c808ef59c9768d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
In the past, string formatting and parsing was done in the users
locale. Now, the C locale is consistently used in QDate(Time) and
localized functions are offered in QLocale. This patch reflects
this change in the documentation.
Change-Id: I81afda9063fa232d06841d63f69e19b49f8083f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime's comparisons just compare milliseconds when both values are
local times and their statuses (hence DST-ness) match. It can do the
same for time-zones. While doing the same for UTC and fixed offsets
wins nothing, it also costs nothing, given that we're already checking
the spec.
Task-number: QTBUG-75585
Change-Id: Ib6d824569aba8def2f1319ef3a11cca6869a5b5e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add some unit tests using emojis as separator characters to check
utf handling.
Change-Id: I03c4bb5cd349e649c58e8a908c38a0185d80e722
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test was previously using int; I shall be wanting to add tests
that exercise the bounds of qint64. Clean up the layout of the
test-row additions in the process of making a trivial change to them
all. Also const the QFETCH() types so we catch any use of non-const
methods on the values fetched.
Change-Id: I4b0187de71f5f14b39b4eabe8afd12a196f73d23
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The seconds and milliseconds default to 0; so omit them when they're
zero, unless there's nearby code that contrasts nicely with them.
Change-Id: Iea049015e976f5a5209fe87a2cbfdae9de49a559
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTime() is invalid. Only the seconds and milliseconds are optional,
for valid times. Use startOfDay() for zoned times, QTime(0, 0) for
fixed-offset ones.
Change-Id: I3b65d5c3733ac83dc3a6c214859c3f56a480bb94
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Nothing used defDateTime(), nothing but it used defTime(). The only
other use of defDate() were from one test, which might as well make it
a local variable.
QDateTime's default is invalid, making invalidDateTime() redundant,
and the invalidDate() and invalidTime() it called had no other users.
Change-Id: I0e07ee58478bfe8ba680eafb52e2f73a962edd33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test data for QDateTime unit tests was constructed in system's local
time, which made unit test outcome dependent on the time zone of the
system running the tests.
This led to failing unit tests on systems with libc6 version
2.31 or newer. A QDateTime in a timezone, which has daylight saving
time, was created and then used in Hawaii's time zone,which has no
daylight saving time. Newer glibc checks this and returns errors.
This patch changes the behavior to create the test data in a
specified time zone setting.
Task-number: QTBUG-80441
Change-Id: I0330b647fa011be99141dde09001ff2d58bd3a5f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of doing string formating first and then using QTest::newRow,
we can do both at the same time using QTest::addRow
Change-Id: Ia5c90eb705a806e37b96a1fa174a6557f91bee6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
To not have to bother with encodings, a few QStrings are changed
to QByteArrays. This way, a few calls to QString::fromLatin1 and
to QString::toLocal8Bit can be removed
Change-Id: Ia0cf27fc2a86f9842ed0f3ebe47b050bb8a3f4e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QDate was changed to consistently use the C local in
serialization and parsing in git commit
5ba66c5622.
This commit reflects this change in the unit tests.
Task-number: QTBUG-80441
Change-Id: Ib21a215ef0e36c9eaa2c161b92c6877a50ae6f06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QDateTime::toString uses the C locale since 5ba66c5622
So don't expect locale specific day- and month-names.
Task-number: QTBUG-80441
Change-Id: I08f53b6b33ed9e7eaaa58df4ca6a966c4ba9ef24
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The serialization code neglected to check against null. Sinze zones
are saved either by IANA ID or in our special OffsetFromUtc format,
representing an invalid zone by a string that cannot possibly be a
valid IANA ID will do.
Fixes: QTBUG-86019
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I6882026403d00f8b254aab34c645f1cf8f9fcc2d
Reviewed-by: Taylor Braun-Jones <taylor@braun-jones.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the actual minimum value, rather than minus the maximum, and adapt
the overflow expectations so that they're correct west of Greenwich as
well as east.
Change-Id: I7a5f4510db0fdea3855b5b2bd4c4a86882030efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a limitation of mktime(), we would have declared it invalid.
Tidied up qt_mktime() slightly in the process.
Change-Id: I25469e314afee6e0394e564bc69a98883005d4ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
No client of QDateTimeParser actually uses it unless datestring was
enabled, nor is it any use without datestring. Various methods
conditioned on datestring are broken unless datetimeparser is enabled.
We can't condition public API on datetimeparser, as it's a private
feature, but client code can condition use of it on the private
feature. All string-to-date/time conversions that use a string format
(this includes all locale-specific formats) depend on feature
datetimeparser.
Change #if-ery (or add it) in all client (including test) code to test
the right feature.
Tidied up some code in the process. Killed some already-redundant
textdate #if-ery. Renamed a test whose name claimed it involved
locale, which it doesn't, in the course of #if-ing it.
This simplifies the condition for feature datetimeedit (which overtly
depended on textdate, redundantly since it depends on datestring which
depends on textdate; its dependence on datetimeparser now makes its
dependency on datestring also redundant).
It also removes the need for assorted datestring checks in
QDateTimeParser itself.
Change-Id: I5dfe3a977042134b2cfb16cbcc795070634e7adf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Recent changes in .pro files hadn't been propagated.
Re-ran pro2cmake.py and saved the results.
Change-Id: I91e4cd513329bce10ce8cbd0ddae8240af050213
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Rather than naming a "GMT" string so as to repeatedly test whether a
date-time's string representation ends in it, use a simple lambda to
do the test, so that the string is only used in one place anyway.
Makes the test code more readable.
Change-Id: I5afad9ad5d58702bea7f24e5e5688ea4d738ae0d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This (and use of Q_SLOTS for the test slots) makes it possible to
enable QT_NO_KEYWORDS and QT_NO_FOREACH in all the corelib/time/
tests.
Change-Id: I85fd358f3d1a72c9269d5260d0224640c1751f2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since ancient times, tst_QDateTime::fromString_LOCALE_ILDATE() has
claimed to be Windows-only, although there is nothing MS-specific
about it; its name also purports to implicate locale, which it
doesn't. Turn it into two data rows for the more general
fromStringDateFormat() test, with no extra #if-ery about it.
Change-Id: I239c0f80f8f7fa42d498a0f801cc8edfb1db3d8c
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The name CET is locale-dependent; but QLocale doesn't know about
localization of time zone names. Such abbreviated zone names are, in
any case, potentially ambiguous - various zones around the world have
collisions - so they can't be relied on.
QTimeZone's various backends have differing handlings of how to
abbreviate zone names (MS's provides no abbreviated names at all); and
it appears macOS actually follows the relevant localizations.
So it is hopeless to hard-code the expected zone abbreviations.
Changed the tests to consult QTimeZone for the abbreviation and
compare what it gets with the results of checks which should match
this. This is less stringent, but it is at least robustly correct,
thereby getting rid of assorted kludges and #if-ery.
Pick-to: 5.15
Task-number: QTBUG-70149
Change-Id: I0c565de3fd8b5987c8f5a3f785ebd8f6e941e055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's documented to be undefined if the number of seconds is outside
the allowed range, but it doesn't hurt for that undefined behavior to
happen to be that the result is invalid. Added a simple test.
Change-Id: I20c3f680c7948b3904f213452272133be77e4d62
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes][QDateTime] Removed all
locale-dependence from QDate, QTime and QDateTime, including the
Qt::DateFormat members that select the formats of the default and
system locales and the toString(Qt::DateFormat, QCalendar) overload,
which only used its calendar for these formats. All toString()
methods now use, and all fromString() methods only recognize, the C
locale's names for days and months. Use QLocale's methods if you need
to take locale into account.
Fixes: QTBUG-80441
Change-Id: I3a8968438741afb00f44262f79659c51e9b06c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It clearly belonged in tst_QDate::toDateTime(), for which it adds a
few more test-case and in which it inspires some further testing.
The new testing of case-insensitivity doesn't work if the format
contains stray non-format characters, so added a new data column to
take care of that.
Pick-to: 5.15
Change-Id: I73619be02091c97024a84cb963c7029e9fd0569a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They use the Qt::TextDate format, so do depend on the feature.
Rename one in the process; nothing in its test has anything to do with
de_DE locale.
Pick-to: 5.15
Change-Id: I2adae5c46e6009c13b433993ed2c3c761a500bfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a date-time was parsed from a string, the result was equal (as a
date-time) to the correct value, but had (at least in some cases) the
wrong spec, where it should have had a spec reflecting the zone
specifier parsed.
The time-spec imposed for the benefit of QDateTimeEdit is now moved
from QDateTimeParser to QDateTimeEditPrivate, which takes over
responsibility for imposing it. QDateTimeParser assumes Qt::LocalTime
in member functions (where applicable) and uses the time-spec parsed
from the string when constructing the date-time.
QDateTime::fromString() and QLocale::toDateTime() are updated to
use the full QDateTime returned by QDateTimeParser.
Fixes: QTBUG-83075
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I8b79add2c7fc13a200e1252d48dbfa70b36757bf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We should not implicitly convert a QString to a QLocale object. It can
easily create unwanted side effects.
Change-Id: I7bd9b4a4e4512c0e60176ee4d241d172f00fdc32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace with a parser which actually does the job right, fixing
various infelicities in the parsing in the process.
Make the parser strict about formatting.
Adjusted tests to match. Fixed some QTime invalidity tests to each
test only one invalidity at a time (the invalid year and day tests
also used an invalid month).
[ChangeLog][QtCore][QDateTime] The parser for the Qt::RFC2822Date
format is now stricter, requiring the text to exactly match the form
of one of the relevant formats. A valid date or time will still be
parsed, even if the other part of the content is invalid, as long as
it (and any offset, if present) has the right form. In particular, the
parser now rejects texts with trailing cruft (other than space).
Fixes: QTBUG-80038
Change-Id: Id25675afd75f82f6351f20e79f0154f3ceda35ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152