Follows the QWindow semantics, and is a replacement for creating
a QWidget with a QDesktopScreenWidget as the parent.
We can now remove much of the special handling of QDesktopWidget and
the Qt::Desktop window type, and get rid of QDesktopScreenWidget.
Add a manual test that allows local testing. Our CI environments
only have a single screen, and no multi-head display server setup
which is the primary case where QWidget::setScreen is interesting.
For the more common case of a virtual desktop, QWidget::setScreen
has no real impact (just as QWindow::setScreen doesn't).
Change-Id: Id0099e069d316741bacd8c795c396ccad37be297
Fixes: QTBUG-85483
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Check that we can successfully instantiate the data
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: Ib100a5242470d7fc8067058cc4d81af2fa9354b0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Check that we can successfully instantiate the debug
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: I3943e7a443751d250c33b2ca1b9cf29207cfe6c4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add metaType()/setMetaType() methods to be used instead
of the type() methods taking a QVariant::Type.
Change-Id: Ieaba35b73f8061cd83288dd6b50d58322db3c7ed
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Also take this opportunity to reshuffle the content-encodings in the
intended ordering since the ordering is used to signify priority.
Task-number: QTBUG-83269
Change-Id: I022eecf1ba03b54dbd9c98a9d63d05fb05fd2124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A few new files were added with old-school defines.
Change-Id: Ieb2c71e094e55102f3f39fb9551823f36863f5f4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Not following redirects is not a feature, but just a hastle for everyone.
The main issue with switching this default is that applications that
actually do manual redirect handling will break in various ways.
FollowRedirectsAttribute was removed as it no longer serves any
purpose beyond duplicating the default value.
[ChangeLog][Network] QNetworkAccessManager now follows redirects by
default with the NoLessSafeRedirectPolicy.
[ChangeLog][Potentially Source-Incompatible Changes]
QNetworkRequest::FollowRedirectsAttribute was removed and has been
superseded by QNetworkRequest::RedirectsPolicyAttribute
Fixes: QTBUG-85901
Change-Id: Ic5b776180a4b84ac4fc895158bb5a66a3c91a042
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After reimplementing Qt JSON support on top of CBOR, there were
unintended behavior changes when converting QVariant{, List, Map} to
QJson{Value, Array, List} due to reusing the code for converting
QVariant* types to CBOR types, and from CBOR types to corresponding JSON
types. In particular, conversions from QVariant containing QByteArray to
JSON has been affected: according to RFC 7049, when converting from
CBOR to JSON, raw byte array data must be encoded in base64url when
converting to a JSON string. As a result QVariant* types containing
QByteArray data ended up base64url-encoded when converted to JSON,
instead of converting using QString::fromUtf8() as before.
There were also differences when converting QRegularExpression.
Reverted the behavior changes by adding a flag to internal methods for
converting CBOR to JSON, to distinguish whether the conversion is done
from QVariant* or CBOR types. These methods now will fall back to the old
behavior, if the conversion is done using QJson*::fromVariant*().
Additionally fixed QJsonValue::fromVariant conversion for NaN and
infinities: they should always convert to QJsonValue::Null. This works
correctly when converting from variant to QJsonArray/QJsonObject, but has
been wrong for QJsonValue.
Added more tests to verify the expected behavior.
[ChangeLog][Important Behavior Changes] Restored pre-5.15.0 behavior
when converting from QVariant* to QJson* types. Unforeseen consequences
of changes in 5.15.0 caused QByteArray data to be base64url-encoded; the
handling of QRegularExpression was also unintentionally changed. These
conversions are now reverted to the prior behavior. Additionally fixed
QJsonValue::fromVariant conversions for NaN and infinities: they should
always convert to QJsonValue::Null.
Fixes: QTBUG-84739
Change-Id: Iaee667d00e5363906eedbb67948b7b39c9d0bc78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before the introduction of QDecompressHelper gzip was preferred over
deflate. The change seems to be accidental. Amends commit
7b76379a89.
Change-Id: I70f33d551912465d63f49ea3db1ac3575d19a92d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
We only support version 4 and 5 in Qt 6.0. 1 and 2 are already gone
(due to being based on binary JSON), now we remove 3 as well.
Task-number: QTBUG-81346
Change-Id: I3627dcc0587f1e36f11e93edf7172889e911d64e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Use the actual minimum value, rather than minus the maximum, and adapt
the overflow expectations so that they're correct west of Greenwich as
well as east.
Change-Id: I7a5f4510db0fdea3855b5b2bd4c4a86882030efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a limitation of mktime(), we would have declared it invalid.
Tidied up qt_mktime() slightly in the process.
Change-Id: I25469e314afee6e0394e564bc69a98883005d4ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We use qt_wrap_cpp instead of AUTOMOC so that we can easily find the
json files.
Getting autorcc to run only after json file has been generated was
deemed too tricky. Therefore the test is slightly modified to check for
the json files in its directory instead of the resource, if the qrc file
does not exist.
Change-Id: Id1aabb117c8bab3ff81156da1f66d64e796bf18b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Removed isCompressed(), deprecated since 5.15, and (since 5.13)
addSearchPath() and searchPath().
Change-Id: I4b6fb8077c02bbe322334e474eaf0a2a7caf0004
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QString's fromUtf16() prefers char16_t data over ushort.
Change-Id: Ib20c5afa09ceabb4e91fe434b6a057edb4739a53
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Employ RO0; inherit the constructors from the base class; and
do some code tidies as a drive by.
The inherited constructors bring in goodies like initializer_list
support.
Change-Id: Ia00a3f9b0ccbf182bf837bc65ba2305110c8dc60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Receiving an rvalue still requires to check whether the parameter
is detached, otherwise we can't steal its backing std::map.
Change-Id: Ie88dbf39fd777112ad7bb20a46d5c2d65be8eb3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and QMultiMap as std::multimap.
Just use the implementation from the STL; we can't really claim that
our code is much better than STL's, or does things any differently
(de facto they're both red-black trees).
Decouple QMultiMap from QMap, by making it NOT inherit from
QMap any longer. This completes the deprecation started in 5.15:
QMap now does not store duplicated keys any more.
Something to establish is where to put the
QExplictlySharedDataPointer replcement that is in there as an
ad-hoc solution. There's a number of patches in-flight by Marc
that try to introduce the same (or very similar) functionality.
Miscellanea changes to the Q(Multi)Map code itself:
* consistently use size_type instead of int;
* pass iterators by value;
* drop QT_STRICT_ITERATORS;
* iterators implictly convert to const_iterators, and APIs
take const_iterators;
* iterators are just bidirectional and not random access;
* added noexcept where it makes sense;
* "inline" dropped (churn);
* qMapLessThanKey dropped (undocumented, 0 hits in Qt, 1 hit in KDE);
* operator== on Q(Multi)Map requires operator== on the key type
(we're checking for equality, not equivalence!).
Very few breakages occur in qtbase.
[ChangeLog][Potentially Source-Incompatible Changes] QMap does not
support multiple equivalent keys any more. Any related functionality
has been removed from QMap, following the deprecation that happened
in Qt 5.15. Use QMultiMap for this use case.
[ChangeLog][Potentially Source-Incompatible Changes] QMap and
QMultiMap iterators random-access API have been removed. Note that
the iterators have always been just bidirectional; moving
an iterator by N positions can still be achieved using std::next
or std::advance, at the same cost as before (O(N)).
[ChangeLog][Potentially Source-Incompatible Changes] QMultiMap does
not inherit from QMap any more. Amongst other things, this means
that iterators on a QMultiMap now belong to the QMultiMap class
(and not to the QMap class); new Java iterators have been added.
Change-Id: I5a0fe9b020f92c21b37065a1defff783b5d2b7a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QFontDatabase is a singleton and all instances would share
a single, mutex-protected global data pointer. But some functions
were implemented as non-static functions. This caused a lot
of code on the form
QFontDatabase().families(...)
since there was no static access. Other functions were implemented
as static.
To consolidate, we make all functions static. This should be
source-compatible, but not binary compatible.
[ChangeLog][QtGui][Fonts] Some functions in QFontDatabase were in
principle static, but previously not implemented as such. All
member functions have now been made static, so that constructing
objects of QFontDatabase is no longer necessary to access certain
functionality.
Fixes: QTBUG-83284
Change-Id: Ifd8c15016281c71f631b53387402c942cd9c43f6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QQuickPointerEvent had them, so despite how trivial they look,
it's very convenient to keep using them in QQuickWindow rather than
duplicating these kinds of checks in various places, and for multiple
event types too.
Change-Id: I32ad8110fd2361e69de50a679ddbdb2a2db7ecee
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Changes are not too big for now. Just replaces use of the previous
calls to the zlib decompression function. And initialize
QDecompressHelper when we know the content-encoding.
Task-number: QTBUG-83269
Change-Id: I41358feaef2e7ac5f48f14e3f95ec094e0c110b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After enabling Qt::AA_UseHighDpiPixmaps, QIcon::pixmap()
now returns pixmaps larger than the requested size on
devicePixelRatio > 1 screens.
Adapt tests to account for this changed behavior.
Skip tests where it’s unclear what the the expected
behavior is, or where the test logic does not apply
to dpr > 1.
This gives a clearer indication of where we are
(39 passed, 0 failed, 9 skipped), and enables using
the qicon test to catch regressions also when running
at dpr > 1.
Remove the "lowdpi" testcase flags from the qmake and
cmake project files.
Change-Id: Ia7ce722ae356fc496a91b54e9f5d590d13b9df62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
To support streaming decompression in QNAM.
Will also be used to refactor existing decompression code in QNAM.
Task-number: QTBUG-83269
Change-Id: Iecf3e359734163f15686c949f75d41fa4794a00e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoids the conversion from UTF-8 for uses that are not dumping a string.
Mass conversion of Qt sources left for future opportunity.
Fixes: QTBUG-85811
Change-Id: I4ca4a35b687b46c39030fffd1626ae6c3294cacf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can end up in a situation where a (soon to be destroyed) observer is
owned by a binding which is about to be deleted. If in that situation
the binding is destroyed first, we end up with a dangling pointer
and ensuing memory corruption. Instead, we now first transfer the
ownership of the observer and only destroy the binding afterwards.
Fixes: QTBUG-85824
Change-Id: I721c0319281ada981ae7896bd2e02e9a0cc901b8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fixes warning by Clang:
warning: 'const volatile' type qualifiers on return type have no effect
[-Wignored-qualifiers]
const volatile unsigned long long * const volatile func_KVPKVull() {...}
^~~~~~~~~~~~~~~
Change-Id: Ia4aae6521c84f4a18d92ad5035af5b247d283140
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Made QPromise::swap public, added free standing swap() for
QFutureInterface and QPromise. Updated QPromise special member
functions. Extended tests
Task-number: QTBUG-84977
Change-Id: I5daf6876df306d082441dbcdf5ae4dee3bfc0ead
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
We already had append(const QList &) and now there's an overload
taking an rvalue reference.
Change-Id: Id2fbc6c57badebebeee7b80d15bb333270fa4e19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't know why std::shared_ptr allows this, but why not.
[ChangeLog][Important Behavior Changes] QSharedPointer objects will now
call custom deleters even when the pointer being tracked was null. This
behavior is the same as std::shared_ptr.
Fixes: QTBUG-85285
Pick-to: 5.15
Change-Id: I24006db8360041f598c5fffd161c260df0313b55
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
‘t’
Specifies that the argument is a ‘ptrdiff_t’.
This modifier was introduced in ISO C99.
We use qsizetype, which is the same width as ptrdiff_t, so it makes no
difference in va_arg().
Change-Id: Iea47e0f8fc8b40378df7fffd16255730109413a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Deprecated in 5.15 in favor of CBOR.
Fixes: QTBUG-81239
Change-Id: I711d4bd7dd1247f58e77ac9fa53304cbe5028918
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Our hardware optimized conversions of float to qfloat16 rounds to even
where our table based conversion truncated to zero.
The rounding is not in this patch exactly round to even like the
hardware implementation but much closer.
Change-Id: I4c5e72c15fef9079d3660680b2727ff7ba4e768a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
BLAKE2 does not specify requirements about specific hash sizes and
since QCryptographicHash does not support dynamic hash sizes, only the
most common hash sizes could be covered by this.
The supported hash sizes were chosen to match the ones supported by the
Linux kernel.
The new hashing algorithms for QCryptographicHash are:
* BLAKE2b (160 bit, 256 bit, 384 bit, 512 bit)
* BLAKE2s (128 bit, 160 bit, 224 bit, 256 bit)
[ChangeLog][QtCore][QCryptographicHash] Added BLAKE2b and BLAKE2s
hashing algorithms.
Fixes: QTBUG-78198
Change-Id: Id9e0180a974093982fdf1cdd6180988a2e5e9f4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only keep 3, 4, and 5 because 3 is the lowest version where binary JSON
is not used anymore.
Change-Id: Id0319e8eceb845017ed493d0ef6902b53050d5a6
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We already have the information in the QMetaTypeInterface, and provide
functions to access sizeof. Adding alignof support seems natural, and
should make it easier to handle over-aligned types.
This should also be helpful in QVariant.
Change-Id: I166be76f4b7d2d2e524a3a1e513bd2f361e887c1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some compilers implicitly captures, and will warn about the unused capture.
Change-Id: Ib5e1cc3956c7eb0dc87cee834cce8a2b3dd0d30b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The previous implementation multiplexed callback-based event
notification into a single proxy event (cf. 85403d0af), which was
in turn object-waited for (this was the case since the beginning
of public qt history). It makes more sense to multiplex into a
posted message, because that also works with foreign event loops
that do not know anything about our event objects.
Task-number: QTBUG-64443
Change-Id: I97945ac8b5d7c8582701077134c0aef4f3b5a18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Not sure why this was disabled in the first place.
Change-Id: I66329b55fd46d03fd96818c6c7004718ddea5c79
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Infinite is only when the mantissa is 0, everything else is NaN.
std::isnormal returns false on zero.
Pick-to: 5.15
Change-Id: I897fc0dc3b8a9c557bb1922ea7ca8df501e91859
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move QWindowsMime (which was a public class in Qt 4 and moved to the QPA
plugin in Qt 5) to the platform namespace and add register functions to the
native application.
Move in test code from QtWinExtras.
Task-number: QTBUG-83252
Change-Id: Iaac440e2d5cb370110919921b1eeb779600b5b65
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also, remove the deprecated function and its auto-test.
Change-Id: If04a54c4b91e0f76523960c7b1a5bcb8fe883ac6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since 5.14: intersect(), angle(). Also removed definition of M_2PI
from test, since its last use was in the tests being removed.
Change-Id: Ie3a12247e3760e8bfdd3a659cd06245c86b198c2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QUrl::fromEncodedComponent_helper() only existed to support some old
methods deprecated since 5.0, that I recently removed.
It was the only caller of qt_urlRecodeByteArray() aside from that
function's own autotest.
Both were private.
Task-number: QTBUG-85700
Change-Id: I5d09fd44e768847ce51a1ae7043150922cb5314c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
warning: comparison of integers of different signs: 'qsizetype' (aka 'long long') and 'unsigned long'
Change-Id: I03acb1f7aed782169a0a42cd8afc84b85991cd1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long')
Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add conversions from/to HBITMAP, HICON to QImage. Split the pixmap
conversion functions apart to use them.
Task-number: QTBUG-81876
Change-Id: Ic0c41a402a1f6e9bec572fc4d691357bd48e6423
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As of 951d490750, high-DPI support
for pixmaps is enabled by default, which makes this test fail
when running on a local system with a high-DPI display.
Change-Id: I3fe4674d19a57bf82aa32b01d470c714092f7e62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Avoid parsing over the buffer limit, or interpreting non-hex
as hex.
This still leaves parsing of lines longer than 300 chars
unreliable
Change-Id: I1c57a7e530c4380f6f9040b2ec729ccd7dc7a5fb
Pick-to: 5.15 5.12
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
As defined by https://llg.cubic.org/docs/junit/
Change-Id: Ic7683f3d49c529674f8467d591528d4a65d3add8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The attributes are, like the elements, maintained in reverse
order in the underlying QTestCoreList, so we need to iterate
them backwards when printing out the resulting XML to reflect
the order they were added.
This results in e.g.:
<testcase name="passingBenchmark" result="pass">
Instead of:
<testcase result="pass" name="passingBenchmark">
Change-Id: Ic2eeab8de05ffedd0c41977358d5b40ff77878b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It doesn't understand the arguments we usually pass to testlib.
Change-Id: Iea83d1d8c31a510b2bc442cbfc810eac631322e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Deprecated since 5.0. Renamed a function in a manual test that no
longer needs to say it's Qt5-specific.
Change-Id: I6f2159c702f389d378a0e4d86bd4fe633298b100
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We don't want the signal dumper to pick up signals that our own
test machinery produces, such as the ones emitted from the watchdog
thread startup and shutdown. This would otherwise produce:
tst_Signaldumper::initTestCase() Signal: QThread(7fc969e0d870) started ()
At startup, and at shutdown even more confusingly:
tst_Signaldumper::UnknownTestFunc() Signal: QThread(7fc969e0d870) finished ()
Change-Id: I9e81fa168eaa92551d38d5576973bbf95ac23364
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The logic was changed in eb52d78e90 to only produce a single
result for all the benchmark iterations, but only the plain text
output was rebaselined. This was not caught by the test since we
only run this test with the plain test logger. Regenerating the
results with the python script however runs it with all loggers,
so let's fix the baseline.
Change-Id: I9ebe8a59ac3ab36694a739f98dbfffbae9a08552
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A QWindow should only become Active when it's inside an
NSWindow that is Key. If the NSWindow is not key, we need
to wait for it to be so, and handle window activation
from QCocoaWindow::windowDidBecomeKey() instead. Otherwise
Qt will report a QWindow as Active when, in reality, it
is not.
Change-Id: Ib7e63b374f26af527a668c7f7d863c4168a4446d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The -arch_blank argument to lipo is no longer supported.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I47efcb3633f23b7a18d66211bc16d5c9dbc067c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We don't want to print the QString as represented by the debug
operator, but instead want to expand line feeds and other character
codes as normal.
Change-Id: I7261d8f94e7b4382733f06eb22f9a740a5c0488f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before 0a93db4d82 we would polish the
application palette even when it was the default palette, as we
always recreated the system palette each time a style was set.
After the change we skipped polishing the palette unless it was set
by the user, under the assumption that the style would set its
own default palette if it wanted to override the system palette.
This turned out to break the style's ability to slightly tweak the
palette via polish (versus the more full on standardPalette approach).
We now polish both the default palette and user palettes, and we do
so as part of the normal palette update logic. This ensures that
the style also gets a chance to polish the palette when the platform
theme changes.
The polish will not have an effect on the resolve mask of the palette,
as the polish is conceptually the same as a base palette, and should
not affect e.g. Qt::AA_SetPalette.
Fixes: QTBUG-85469
Fixes: QTBUG-85188
Pick-to: 5.15
Change-Id: I869e9c442b177de4f1dc49eb75220709306f4d12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt6 package was not found the tests were configured in-tree as opposed
to standalone tests.
Use the same trick we do for building examples in-tree.
Specify the path to the build tree packages, and don't create targets.
Amends 96e3ee0659
Change-Id: Ia60de416ce0afff5bd40be8c0c6e3c7898fd7ebf
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Since 5.8: setHidden(), isHidden()
Part of the QCommandLineParser test also used setHidden().
Change-Id: I05a1c63ff3beb1167ed75632c1b71d7fff17f09e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since 5.0: QUrl's image of the QUrlQuery API
Remove deprecation-suppression from tst_qurl.cpp, too.
Change-Id: Ide826283cb4e177fb34fb4080502f5a4620bd5d7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since 5.3 joining() and old Joining type
Replaced by JoiningType joiningType()
Change-Id: Iefee50aaf94cec6d67b5fc004b3e68357b2015c5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Hardcode the tests which were previously scanned from the source.
See qtbase/24e83de8d1924b8003c84f1df05b7befea2c5120.
Change-Id: I8fb05568977f86726b20948a9c2d1cfce5cba161
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
At the moment it just exposes QTBUG-84676, that is, OpenSSL
and non-OpenSSL backend act differently. Went a bit overkill
in making it data-driven, so if someone wants to add more
samples it should be easier to do so.
Change-Id: I96538c9563d12d69c217415ba85e244dda5e0cd0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a namespaceURI parameter to the following methods of QDomNode:
firstChildElement(), lastChildElement(), nextChildElement() and
previousChildElement()
Those methods can now be used to filter for elements with a specific
namespaceURI without the need to use QDomNodeList.
[ChangeLog][QtXml][QDom] Added namespaceURI parameter to browse methods
like firstChildElement() to filter for elements with certain namespaces
without the need of QDomNodeList.
Change-Id: Ic2cfe8c6d5d5f6b5fcf27165df15bce54ad0f23a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The tests/auto/cmake project can be configured separately as a
standalone project with qt-cmake, or as part of the overall qtbase
standalone tests.
To do that a bunch of things were done
- Ported all Qt5 strings to Qt6
- Replaced in all projects the use of add_definitions and
include_directories with a target based approach, except for 2 tests
where we check that the old-style approach works, otherwise the
tests would file
- Removed some (possibly unneeded) EGL / OpenGL tests
- Fixed some C++ code
- Added setup code to tests/auto/cmake/CMakeLists.txt to figure out
which modules are available and should be tested
- Fixed Qt6CTestMacros.cmake to be loaded by Qt6Core
- Removed the CMake tests to not be run in qmake builds of Qt because
they would fail anyway
- Enabled the CMake tests to be part of standalone tests
- Disabled auto-passing of the C and CXX compiler cache vars when
cross-compiling so that the tests can somewhat pass on boot2qt.
This is the issue we encountered in
e2b2cd9397
- Ultimately disabled tests for boot2qt, because the -rpath-link
flag is not generated by CMake for some reason.
- Added code to setup the environment when running an executable that
was built as part of the test, so that the proper Qt libraries are
found. This handles both the standalone tests case and separate
project case.
The remaining unported tests are test_import_plugins which requires
quite a bit of work to get some modules and plugins built that were
done as part of the qmake .pro files, test_plugins that checks
some Network plugins which I'm not sure about, and
test_add_big_resource which doesn't work with namespaced builds
and there's no good way of detecting those at the moment either.
Change-Id: Ic8809c72817d1db81af6c6014c11df6473ad8c75
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Expand the getSetCheck to include all properties, and add a test to
verify the fallback logic for the tooltip property.
Use the meta object system to set and check properties in the
tooltip-test to verify that things don't break when migrating to
the new property system.
Change-Id: I56355e8b436ede46701a124a9241ed26d2c706c5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QEasingCurve has a richer variety of curves and curveShape was already
implemented by changing the easingCurve property.
[ChangeLog][QtCore][QTimeLine] Deprecated QTimeLine's curveShape
property in favor of the easingCurve property.
Pick-to: 5.15
Change-Id: I7261c0f24d7e02bc94624f0b74d699df62de1a52
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
For types that don't have an operator==(), always trigger the binding
and the changed notification.
Task-number: QTBUG-85578
Change-Id: I41374f6d13c88106f4de83864e82172f3a248150
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Smart pointers like QSharedPointer<T> do have a value_type, but their
equality does not depend on T being comparable. Therefore, instead of
simply checking for T::value_type, test for a few other container
requirements.
This also required to add an additional check for std::optional, as that
one has an unconstrained operator== on MSVC.
Change-Id: Iefd048f7aa360f4713ecd79f80acd7dae72ee18c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously, only QNotifiedProperty was supported. As moc cannot
determine by itself whether the backing property is a QProperty or a
QNotifiedProperty, allow NOTIFY false to indicate that it is a plain
QProperty. For symmetry, NOTIFY true is also allowed and means that the
backing property is a QNotifiedProperty.
Change-Id: I66f3105c976ef084198ce8658bc07499a3cb1cd8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During review of a refactor (coming shortly), Thiago wondered what the
magic numbers were. On closer examination, I concluded that they were
wrong and wrote some tests to prove it. This commit adds those tests;
replaces the misguided old code with something that passes them; and
documents the reasons for the various parts of its decisions.
In the process, tidy up QLocaleData::doubleToString() somewhat and
rename some of its variables to conform to Qt coding style.
Change-Id: Ibee43659b1bdb0707639cdb444cfe941c31d409f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use aggregation instead. Prepare for using QPromise instead of QFutureInterface.
Task-number: QTBUG-84702
Change-Id: Ic88564dca8c83a178a281cb843032292210a6d25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Passing QDBusUnixFileDescriptors over peer-to-peer connections currently
does not work, because QDBusConnectionPrivate::setPeer() does not set
this->capabilities (unlike QDBusConnectionPrivate::setConnection()
which is executed for bus connections).
Keep track of whether the connection already has been authenticated, and
once the connection does get authenticated, update this->capabilities.
Note that sending a message directly after connecting (before any
message has been received from the peer) might still fail if the message
contains a QDBusUnixFileDescriptor.
Pick-to: 5.15
Fixes: QTBUG-85396
Change-Id: Ib83213ebcd3255fb091c6faefb3618745b8d736c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In this case the srb represents the layout only, and can still be used
to create a pipeline. For setShaderResources() one will then need to use
another, layout compatible, srb that references valid resources.
Change-Id: I3ea5b63df3be8847540ca4c0c40fbd29dbed8fb7
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Given we optimize for the case where the new value is of the
same type of the one already stored in the variant, enable move
assignment for that case.
As a drive-by, avoid a path to detach() for data() if we know
we're detached.
Change-Id: I9abbdc10637ce77ebb747b49d83e1ef914d997bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And mark some methods as inline.
Performance is critical for our new property system. Compiling
it in one unit makes it possible for the compiler to do a much
better job at inlining and generating optimized code.
Improves performance of binding evaluations by another 20%.
Change-Id: I5a2aa93c74d2b68418b0a9d2e34d8199bb71e3ad
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Avoid any QVariant or type dependent code in the cpp files.
Instead, let the binding wrapper determine if the value
has changed and return true/false accordingly.
This required also some reworking of the guard mechanism
for notified properties, where the guard function wrapper
now calls first the binding evaluation function and then
passes the result to the guard.
Change-Id: I350d07a508ccc0c5db7054a0efa4f270b6a78ec3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There's no point in returning a usually empty error when
evaluating bindings, adding overhead to the regular code
path.
Instead, the error can be set on the currently evaluating
binding if required. This streamlines the functor used to
wrap the binding and should thus expand to less code and
execute faster in the regular case.
To achieve this, expose a pointer to the currently evaluating
binding in the private API (as QtQml needs it to be able to
report errors).
The error case now requires one additional TLS lookup, but
we don't really care about performance in that case anyway.
Change-Id: Iecb450e765244930a41d813fcf8eb4013957a6a3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Remove location(). The method would always return an empty value. If you need the location,
the binding itself has it.
Remove setDescription() and require that the description gets passed
in the constructor. Never create a d pointer if type is NoError, so we
can quickly check for it inline.
Change-Id: I7eb8a94786281069d6ea2d82567c09aa50c52ef6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This way we can return a nullptr for cases where the class does not want
to provide a property at all. For example outside of bindings when
reading the default value. The moc-generated code can check for such
nullptrs and handle them.
Change-Id: I7ff478cb254012147bb7aed3feb160e3e679cb6d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The issue has been introduced when refactoring QByteArray::count
implementation (see 631127126c).
Because the last argument of QByteArrayMatcher::indexIn() method
has a defult value, it has been compiling without issues, but was being
called with incorrect size parameter. Fixed it to pass the length of the
input data correctly.
Change-Id: Ic9c2f33733131ec17276aa889f2d7ea40ec79b01
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt::UNICODE_ACCEL had no effect since at least Qt 4.0. We can drop
it in Qt 6. The whole Qt::Modifier enumeration is still widely
used, so we can't drop it yet, but we should aim at doing so in
Qt 7. Add a note.
[ChangeLog][QtCore][Qt::Modifier] The Qt::UNICODE_ACCEL enumerator
has been removed. It had no effect since Qt 4.0.
[ChangeLog][QtCore][Qt::Modifier] Usage of the enumerators in
the Qt::Modifier enumeration is discouraged. The enumeration
will likely get removed in the next major version of Qt.
Change-Id: If25f30d920878d32903b91a38044f5da042c7eab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is in preparation for regenerating them with the new qt_foo
prefixed APIs.
Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This removes the fully manual registration of comparison operators in
QMetaType and replaces it with an automatic registration through
Q_DECLARE_METATYPE().
[ChangeLog][QMetaType] The QMetaType::registerComparator() and
QMetaType::registerEqualsComparator() have been removed.
Q_DECLARE_METATYPE() now automatically registers any
operator==() and/or operator<() for a type visible where
it is used on that type, as part of declaring its meta-type.
Change-Id: I3df451b652b735c093533838bf32f3cc785439f8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Containers often define an operator==() or operator<() which is very useful
for generic code. But those operators can usually not be instantiated if
the template argument doesn't implement the operator.
This sometimes leads to the compiler trying all possible template expansions
and implicit conversions for the type, giving extremely long error
messages. The traits support can be used to safely constrain those
operators.
Being able to safely detect this will also allow us to fold the comparison
support that is currently a large cludge for user types directly into
QMetaType.
Change-Id: Ib84afb5348c3eb0be5161d6ba9d5fe237709c65f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you pass "STORED false" the name is interpreted as function to be
invoked in order to access the property. This allows storage of a
property in a lazily allocated data type.
Change-Id: I4d3a9cac6985c6419ce687868cb74b91921595a6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Created a QByteArrayView in symmetry with QStringView.
Added the basic tests symmetrical to QStringView tests.
Moved the implementations of non-modifying methods of QByteArray to
namespace QtPrivate, to be reused inline from both QByteArray and
QByteArrayView. Changed QByteArray's counterparts of those methods to
take QByteArrayView as argument instead of QByteArray. Removed
QByteArray's operator QNoImplicitBoolCast(), because it was causing
ambiguity when calling those methods with QByteArray argument (it was
there to perevnt if(!ba)/if(ba) from compiling, but currently that would
be ambiguous and won't compile anyway).
[ChangeLog][QtCore][QByteArrayView] New class.
Task-number: QTBUG-84321
Change-Id: I05f92e654cf65c95f2bb31b9c9018746ac110426
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Created tst_QByteArrayApiSymmetry test for the common APIs of
QByteArray and QByteArrayView. Moved the tests for startsWith(),
endsWith(), indexOf(), lastIndexOf(), compare(), from tst_QByteArray
to tst_QByteArrayApiSymmetry and adapted them to check different
QByteArray/QByteArrayView combinations. Added tests for first(),
last(), sliced(), chopped(), chop(), truncate(), count(), contains()
(test inputs are taken from corresponding tst_QStringApiSymmetry
tests).
Task-number: QTBUG-84321
Change-Id: I4e712b1692e3c1271d51ddcda6c9eb8bb01e11d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The reason for setting this variable was removed in commit 300bd7fff8.
Task-number: QTBUG-25078
Change-Id: Id06072c099481a258cb65b4603efe010e306b7b2
Reviewed-by: hjk <hjk@qt.io>
As we require C++17 now. The configure-time test checking for
future/async is left in for the moment being.
Change-Id: Ifde39d420673f70a2277f5a645bfaad30935a381
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There doesn't seem to be any reason users will need to query tablet
devices by their IDs, because every event comes with a complete
instance already, and we have QInputDevice::devices() to list them all.
QPointingDevicePrivate::tabletDevice() can create a new instance if a
matching one is not found (and complains about that); it's intended
for use in QtGui, as a way to find the device if it was not part of the
QWSI event. Now it sets the parent of those auto-created instances
to QCoreApplication to avoid a memory leak.
On the other hand, queryTabletDevice() is intended for use in platform plugins
that need to check whether an instance exists; but they will take care
of creating new instances themselves, and thus have more control over the
parent and the details being stored. Now that the systemId can also be given,
the search is more likely to have a unique result, on window systems
that provide device IDs.
Rename id() to systemId() to clarify that it's a system-specific unique
device ID of some sort, not the same as the uniqueId that a stylus has.
However it seems that in practice, this will often be 0; so clarify that
if it's not unique, QInputDevicePrivate::fromId() and queryTabletDevice()
may not always find the right instance.
Clarify the function usage via comments.
Change-Id: I82bb8d1c26eeaf06f07c290828aa17ec4a31646b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
After API discussions, agreement was that from(n) is a bad name
for the method. Let's go with sliced(n) instead.
Change-Id: I0338cc150148a5008c3ee72bd8fda96fb93e9c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This keeps the API symmetric with what we have in our string
classes.
Change-Id: I94c5b39b718ca2472f9ca645e7a42e4314636f67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also adjust qCalculateBlockSize() to be able to handle large
allocations.
QVector::length() is currently still limited to 2G items, that will
get changed in a later commit.
Change-Id: I3a92fbfd7f281d30844c5fafa3b9a474bc347c19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the last places where those got used and avoid
allocations when we resize to 0.
Change-Id: Ib553f4e7ce7cc24c31da15a55a86d18bdf1cc5c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a side effect, data() can now return a nullptr. This
has the potential to cause crashes in existig code. To work
around this, return an empty string from QString::data()
and QByteArray::data() for now.
For Qt 6 (and once all our internal issues are fixed), data()
will by default return a nullptr for a null QString, but we'll
offer a #define to enable backwards compatible behavior.
Change-Id: I4f66d97ff1dce3eb99a239f1eab9106fa9b1741a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the default format has letter and word spacing set then these
should be exported in the HTML's body tag. This also adds support
for the reading of letter-spacing and word-spacing set too, so that
the same html outputted can be read back in.
Fixes: QTBUG-83718
Change-Id: Ic4afca21eb05efb779dbf99c6b3c13373e851f15
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This improves the readability and avoids code duplication
in tst_Collections::forwardDeclared. Also some warnings
are fixed:
* qSort is deprecated.
* The = operator for LargeStatic needs to be implemented
explicitly when a copy constructor is given.
* QMap::insertMulti is deprecated, a MultiMap is required.
Task-number: QTBUG-82978
Change-Id: I577f851394edfaa30154bd3417ce391635cc546d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This change only happens to files touched
by the commit to add missing ; to Q_UNUSED.
Task-number: QTBUG-82978
Change-Id: I10e6993a2bb3952cf9a262708b8573550e0dbe63
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
No client of QDateTimeParser actually uses it unless datestring was
enabled, nor is it any use without datestring. Various methods
conditioned on datestring are broken unless datetimeparser is enabled.
We can't condition public API on datetimeparser, as it's a private
feature, but client code can condition use of it on the private
feature. All string-to-date/time conversions that use a string format
(this includes all locale-specific formats) depend on feature
datetimeparser.
Change #if-ery (or add it) in all client (including test) code to test
the right feature.
Tidied up some code in the process. Killed some already-redundant
textdate #if-ery. Renamed a test whose name claimed it involved
locale, which it doesn't, in the course of #if-ing it.
This simplifies the condition for feature datetimeedit (which overtly
depended on textdate, redundantly since it depends on datestring which
depends on textdate; its dependence on datetimeparser now makes its
dependency on datestring also redundant).
It also removes the need for assorted datestring checks in
QDateTimeParser itself.
Change-Id: I5dfe3a977042134b2cfb16cbcc795070634e7adf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Recent changes in .pro files hadn't been propagated.
Re-ran pro2cmake.py and saved the results.
Change-Id: I91e4cd513329bce10ce8cbd0ddae8240af050213
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The API is available by including qopenglcontext.h as usual,
but scoped in the QPlatformInterface namespace. The namespace
exposes platform specific type-safe interfaces that provide:
a) Factory functions for adopting native contexts, e.g.
QCocoaGLContext::fromNative(nsContext, shareContext);
b) Access to underlying native handles, e.g.
openGLContext->platformInterface<QCocoaGLContext>->nativeContext()
c) Platform specific functionality, e.g.
static QWGLContext::openGLModuleHandle()
openGLContext->platformInterface<QEGLContext>->doSomething();
The platform interfaces live close to the classes they extend,
removing the need for complex indirection and plumbing, and
avoids kitchen-sink modules and APIs such as the extras modules,
QPlatformFunctions, or QPlatformNativeInterface.
In the case of QOpenGLContext these platform APIs are backed
by the platform plugin, so dynamic_cast is used to ensure the
platform plugin supports the requested interface, but this is
and implementation detail. The interface APIs are agnostic
to where the implementation lives, while still being available
to the user as part of the APIs they extend/augment.
The documentation will be restored when the dust settles.
Task-number: QTBUG-80233
Change-Id: Iac612403383991c4b24064332542a6e4bcbb3293
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The tab has to be repainted even f the mouse release event happened
outside the tab bar, otherwise it will look like the tab is still
pressed.
As a drive-by, replace the repaint() call with update(); there is
no need for synchronous painting in an event handler.
Pick-to: 5.15
Fixes: QTBUG-81637
Change-Id: Ia55182be906511ac3b462f00add8a621c6c05fc3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Rather than naming a "GMT" string so as to repeatedly test whether a
date-time's string representation ends in it, use a simple lambda to
do the test, so that the string is only used in one place anyway.
Makes the test code more readable.
Change-Id: I5afad9ad5d58702bea7f24e5e5688ea4d738ae0d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Amend d934fd7f54, which was too naive in
assuming that any change to the popup stack while a popup had been
pressed into should result in mouse move events to be delivered without
buttons.
Instead, add a new flag that is set explicitly when the qt_popup_down
widget is closed, and remove buttons from the move move events only when
that flag is set.
Add the sorely missing test case as well, even if we have to accept that
not all behavior can be tested reliably. Ie. on macOS, the simulated
mouse event differs from the event we do get from the QPA plugin or the
system; on Xcb, some of the behavior depends on the window manager.
This is something we could try to clean up for Qt 6.
Change-Id: Ibf0a0a6fb7d401915057365788947e5a35aa20c3
Fixes: QTBUG-84926
Task-number: QTBUG-82538
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We had such an overloaded version in QSslSocket, it was deprecated without
providing any alternative. Now this function has some use and may be
introduced in Qt6, as QSslConfiguration::setCiphers(const QString &).
Last but not the least - a useless and strange auto-test was removed
(it was creating a list of 5 QSslCiphers each with isNull() == true).
That's becasue '!MD5' or 'ALL' (for example) is not a cipher to be found
in supportedCiphers.
Change-Id: I47eb4c0faa9b52885e883751dd992cd9cb3d26fe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Becaues the database objects were created as globals, there was a
possible use-after-free issue when deleting the objects on application
exit.
Move the initialization of the database objects into static variables
inside the test constructor.
As a drive-by, also add one missing test to the CMake projects.
Fixes: QTBUG-85357
Change-Id: I2c8f2c5daee96bb9d1d21dae37950a2da5ffdf27
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The platform plugins are implemented to grab the entire screen if
no window ID is provided. They do not grab the entire virtual
screen, just the screen the method is called on.
On macOS, the implementation ignored the window parameter, and
always grabbed the entire virtual screen. This change fixes the
cocoa implementation. The test passes in local tests (with two
displays with different dpr). Since grabbing a screen returns an
image with managed colors, we need to convert it to sRGB color
spec first, otherwise displaying a grabbed image will produce
different results. This will need to be changed once Qt supports
a fully color managed flow.
The test does not cover the case where a window spans multiple
displays, since this is generally not supported at least on macOS.
The code that exists in QCocoaScreen to handle that case is
untested, but with the exception of the optimization it is also
unchanged.
Done-with: Morten Sørvig <morten.sorvig@qt.io>
Change-Id: I8ac1233e56d559230ff9e10111abfb6227431e8c
Fixes: QTBUG-84876
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Not to pollute the global namespace with rather generic names
(especially in case QT_NAMESPACE is none); also drop the
(now)redundant 'Q' prefix in the names.
Change-Id: I57ea7e3996cced705f7ddbdbc1e0231191b31c43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's supposed to return the same as toLocalFile(), for local files,
which means passing QUrl::FullyDecoded just like QUrl::toLocalFile()
does.
But a few code paths were testing component formatting options without masking
other FormattingOptions like RemovePassword, so this had to be fixed.
Fixes: QTBUG-84594
Change-Id: I82f15148b6d93516200f9ad6258d474e7f10924a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't really know why, but using the ctest
--force-new-ctest-process flag stops the test from hanging.
Also re-enable the test.
Task-number: QTBUG-78449
Task-number: QTBUG-81365
Change-Id: I33094696dfe3f610dc257089074b1c2a9926f651
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The QMAKE_CROSS_COMPILED define isn't used since 2011.
Change-Id: I9f03791e9f7c0ef439db5e65d930c0b7cb928974
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This test calls qmake on a project that generates a .qrc file. On
Windows, where debug_and_release is on by default, the generated qrc
file ends up in a "debug" or "release" subdirectory. On other
platforms the file is generated directly in the build dir.
To guess the right location, the preprocessor defines RELEASE_BUILD
and DEBUG_BUILD were passed to tst_qmake.cpp by the test's .pro file.
While the mapping from debug_and_release was fine for the .pro file,
it was commented out in the automatically converted CMakeLists.txt.
Instead of trying to fix the condition, we're going the easier route
that's used in all other .pro files of tst_qmake: make sure that
debug_and_release doesn't get in the way. In other tests this is done
by setting
DESTDIR = ./
which doesn't work for the generated qrc file. That's why we simply do
CONFIG -= debug_and_release
to make sure that everything is generated directly in the build dir.
Change-Id: I557ac4e21d7b385004d369fae8a3f727d76d4d88
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Required by OpenXR. A VkPhysicalDevice or an adapter LUID + feature
level pair should be adoptable while leaving the rest (device, queue,
etc. setup) to QRhi as normal.
Change-Id: Iada0972671b037b4efb03e7831b7c9b8c5f2393d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The functional style interface is nice, but does feel alien in some
contexts, so better also have explicit encode and decode methods.
Change-Id: Ic07ced15f65cdb3a7f1cf044041e341d2ef87f79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Applied to headers only. Source file to be changed separately.
Omitted statemachine for now to avoid conflicts.
Omitted qmetatype.h for now - to be handled later.
Task-number: QTBUG-84469
Change-Id: I317376037a62467c313467d92955ad0b7473aa97
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Adding support for a static notifier within QProperty itself - through a
QProperty "sister" class - is more efficient in terms of memory
consumption and run-time performance.
The MemberChangeHandler permanently takes up at least three pointers,
while the notified properties only cost one pointer in the binding.
Change-Id: Ia1a8c2b66f1f3c2fe13ae0ad9f12cdb6bdcc35ef
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A guard callback is a predicate which takes the new value set by
setValue or computed as the result of a binding expression. If it
returns false, the value is discarded and the old value is kept.
Note that due to lazyness, when setting a binding, we still notify
everyone as the binding is only evaluated on demand, and the guard can
thus only run when someone actually queries the value.
Note further that a guard is allowed to modify the value that is passed
to it (e.g. to clamp it to a certain range).
Task-number: QTBUG-85032
Change-Id: I3551e4357fe5780fb75da80bf8be208ec152dc2a
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Check at compile time whether the static callback takes an argument
(which has to be of the same time as the type of the property). If so,
retrieve the old value and pass it to the callback.
Change-Id: Ib1c4c9e05b826b6be492b03f66fa72ad015963ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
[ChangeLog][QtCore][QByteArray] Remove method overloads taking
QString as argument, all of which were equivalent to passing the
toUtf8() of the string instead.
Change-Id: I9251733a9b3711153b2faddbbc907672a7cba190
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add overloads for qMin and friends where the arguments are of different
type, but one can be easily promoted to the other. Return the promoted
type. Promotions are only allowed if both types are either signed,
unsigned or floating point numbers.
This should simplify writing code in many case (as for example
qMin(myint64, 1)) and also help reduce source incompatibilities between
Qt 5 and Qt 6, where the return types for sizes of our containers changes
from int to qsizetype.
Change-Id: Ia6bcf16bef0469ea568063e7c32f532da610d1cd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes regression introduced in b4981f9d4c,
due to which it was possible to back-tab into a widget even though it or
its focusProxy had a NoFocus policy.
As a drive-by, split the complicated if-statement up a bit for improved
readability.
Change-Id: Ib0ac2604076e812e340b11534c23ae8ae958d082
Fixes: QTBUG-76924
Pick-to: 5.15 5.12
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When I wrote the QCborValue to QJsonValue conversion, I used
QJsonValue::Undefined because it allowed to keep some level of
compatibility in CBOR, despite the function documentation saying that
CBOR undefineds became JSON nulls. Which they did.
But when we converted QJson{Array,Object} to be backed by CBOR classes,
that Undefined meant the insertion into the array/object actually
deleted the entry.
[ChangeLog][JSON] Fixed a regression from 5.14 that caused values of
default-constructed QVariants in QVariantLists, QVariantMaps and
QVariantHashes to disappear when converting to JSON via
fromVariant{,List,Map,Hash}.
Fixes: QTBUG-84610
Pick-to: 5.15
Change-Id: Ic0987177fe463f352db9bd84993f116e2bdacc75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have no doubt it does, because it's compiler-synthesized, but
we might want to implement the tuple protocol for QPair in the
future and then this will act as a safety net, emulating what
users are currently already doing with QPair.
Change-Id: Ie37f0214bb1aa64210d25be8a256606f4572febe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This (and use of Q_SLOTS for the test slots) makes it possible to
enable QT_NO_KEYWORDS and QT_NO_FOREACH in all the corelib/time/
tests.
Change-Id: I85fd358f3d1a72c9269d5260d0224640c1751f2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the overload-with-template trick from P1423 to avoid ambiguities
when existing callers pass 0 or nullptr.
Add a qdoc-ignored macro to hide the fact that the overload is a
template.
[ChangeLog][QtCore][QString] Added char8_t overload of fromUtf8().
Change-Id: Iaa2d365bfa161ef36cc73fa3bad50aabf34d01db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All our tests were find() == end() or !=, which depends on the
evaluation order of the arguments to operator==(). If end() is called
first, then the detach happens before find() and all is well. But if
find() is called first, it may return end() before end() detaches.
[ChangeLog][QCborMap] Fixed a bug that could cause the iterator returned
from a failing key search with find() not to match end(). Now, every
call to find() will detach in shared QCborMaps; to avoid this, use
constFind() and constEnd().
Fixes: QTBUG-84583
Pick-to: 5.15 5.12
Change-Id: I552d244076a447ab92d7fffd161793496a8d03a8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A QVLA is copyable, so it should be movable, too.
Added a helper function a la P1144's uninitialized_relocate_n to deal
with the QTypeInfoQuery stuff. This way, the code is re-usable
everywhere it's needed. The same cannot be said for QArrayDataOps,
which only a parent can love...
[ChangeLog][QtCore][QVarLengthArray] Added missing move constructor
and move-assignment operator.
Task-number: QTBUG-39111
Change-Id: If0dc2aa78eb29062d73dcd3dc4647ba345ae39e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They were deprecated with replacements in QSslConfiguration proposed (and
some without alternative, which we'll provide if there is any demand
in such an API). Special thanks to M.N. for a nice hint on how to
amend the test without introducing a new API.
Change-Id: I7841a5b3f30469d8204b61cb65921c34275e0650
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The idea was to keep nagging us to update all the platform plugins to
do device registration. But besides being annoying, it would cause
test failures if we start adding QTest::ignoreMessage() all over,
and then some platforms start doing device registration properly.
Change-Id: Ia0fbb64cf86f33532be032ec9eebe6e4ad607f20
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This enables the order of boundValues to be consistent as with a QMap
it could have been reordered which can be a problem for positional
bindings.
[ChangeLog][QtSQL] Changed signature of QSqlQuery::boundValues() to
return a QVariantList
Fixes: QTBUG-51609
Change-Id: I1c80fa8522fa7352723420b6fc9ec466406315fb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Even it was not marked as deprecated the replacement function initFrom()
is available since Qt4 times (and init() is deprecated since then)
Change-Id: I09a4ebbf66b01fbe7aec67691dc68d2e42d1cd78
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
* Assume UTF-8 on all Unix like systems
* Export some functions to be able to compile QTextCodec once
moved to Qt5Compat.
Task-number: QTBUG-75665
Change-Id: I52ec47a848bc0ba72e9c7689668b1bcc5d736c29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was causing some bogus failures in Qt Quick autotests.
Existing APIs like QQuickWindow::mouseGrabberItem() are not really
compatible with the idea of a mouse-less system; but perhaps we can
revisit this later.
Task-number: QTBUG-85114
Change-Id: Id1c2e5894e5cf13a79998aaea28d5f42fad920cf
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We want every QInputEvent to carry a valid device pointer. It may be
some time until all QPA plugins are sending it, but it's necessary to
provide the functions for them to start doing that.
We now try to maintain the same order of arguments to all the functions.
handleTouchEvent(window, timestamp, device, the rest) was already there
(except "device" has changed type now), and is used in a lot of platform
plugins; so it seems easiest to let that set the precedent, and modify
the rest to match. We do that by adding new functions; we can deprecate
the older functions after it becomes clear that the new ones work well.
However the handleGestureEvent functions have only ever been used in
the cocoa plugin, so it's easy to change their argument order right now.
Modify tst_qwindow::tabletEvents() to test new tablet event API.
Task-number: QTBUG-46412
Change-Id: I1828b61183cf51f3a08774936156c6a91cfc9a12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Documented QPromise. Added snippets under auto tests
to ensure they are compiled and run in CI.
Task-number: QTBUG-81586
Change-Id: I20084e38f9d2f6fc8540f95ee03ec3d2827177e8
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Change the meaning of Q_PRIVATE_QPROPERTY to imply that the property is
implemented using a QNotifiedProperty. That requires passing the owner
object instance to the value and binding setters.
Similarly, detect QNotifiedProperty members like QProperty.
Change-Id: If49bbb04c8ccd4a661973888c50d2d556c25034f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
...starting with a new feature: registering different devices at
different seats and verifying their capabilities and that we can get
them back again.
Change-Id: I8e58a49080633753d02a76e5fdc4932f5c674e0a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Vulkan spec changed the behavior for VkApplicationInfo::apiVersion
in 1.1, conveniently breaking compatibility with all existing 1.0 logic.
We can no longer assume that the 1.0 behavior, which was failing instance
creation with VK_ERROR_INCOMPATIBLE_DRIVER for an unsupported version,
is always in place. So do not rely on this in the test, and add a
reminder in QVulkanInstance docs as well.
Fixes: QTBUG-85040
Change-Id: I8f5c7a7830877b72d106c444aebfaea191083ee0
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
CL = Content-Length
The uploadByteDevice was kept after a redirect which caused the
internals to assume that we had to upload the data. Even if this was
not the case we still transmitted the Content-Length header from the
first request which was now stored in two places.
Fixes: QTBUG-84162
Pick-to: 5.15
Change-Id: Ic86b1ef0766ffcc50beeed96c1c915b721d40209
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In Qt 5 we have to work with the esisting API (QSslCertificate::verify),
taking only the peer's chain and the name. We already have a private
API to have a CA's list as an additional parameter, the proper fix
in Qt6 will also introduce a public complement for this.
Pick-to: 5.15
Change-Id: Ib1f75c3056b135c6e6d42f977b5a7034fca658ee
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The recently-added slice() method has the problem that it's a noun
as well as a verb in the imperative. Like std::vector::empty, which
is both an adjective and a verb in the imperative, this may cause
confusion as to what the function does. Using the passive voice form
of slice(), sliced(), removes the confusion. While it can be read as
an adjective, too, that doesn't change the meaning compared to the
verb form.
Change-Id: If0aa01acb6cf5dd5eafa8226e3ea7f7a0c9da4f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This changes the layout of the meta object data, so
also bump the meta object revision.
Original-patch-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: I176fb16c207e8ebe59e358e69554be813406232f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Property flags should be compile time booleans, not something to
be determined at runtime.
We've been using this to dynamically disable some properties in QWidget
based classes dependent on the state of a different property, but this
should better get implemented on top of our widgets.
Change-Id: I6296e8761303ecdf24d9e842142e8596304c015d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add QStringView overloads where they were missing. This keeps things
almost 100% source compatible.
Task-number: QTBUG-84319
Change-Id: Ica8ee773b2ce655e9597097786117959e34b236e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends comment 6e1d70ae12, which
introduced SE_PushButtonBevel so that QPushButton could ignore clicks
outside of the button's bevel.
In the macOS style, make sure that the framerect we pass to
NSButton::alignmentRectForFrame is the rect we receive from QPushButton
in the style options. The frame property of the shared NSButton* object
might not be initialized.
In the style sheet style, handle SE_PushButtonBevel the same ways as
Contents and FocusRect, as it is not a separately styleable property.
Change-Id: I12eb1b046c864a02b34d276e6352e2e16d44231e
Fixes: QTBUG-84852
Fixes: QTBUG-84879
Task-number: QTBUG-81452
Pick-to: 5.15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Whoever wrote this test, was a PROPER hacker: trying to force a TLS implementation
not to properly compress some data, they generated a sequence of bytes in a very fancy manner,
something like 255 0 0 0 255 0 0 0 123 0 0 0 255 0 0 0 - yeah, it's really a random sequence
of bytes, surely, it's impossible to compress! Meh.
Pick-to: 5.15
Change-Id: Ia10ae18a40b5b8f006c45147b06fe5be6efcb129
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Amends 32b586864e, which added an override
of QStandardItemModel::roleNames(). It's good for it to have its own
QHash so that roles can be added, and because
QStandardItemModel::setItemRoleNames() remains un-deprecated; but before
that change, they were the roles that QAbstractItemModel had initialized
from QAbstractItemModelPrivate::defaultRoleNames(). In particular, we
need "display" to map to Qt::DisplayRole by default; several tests in
qtdeclarative depend on that.
Change-Id: I58b2d6aa6b6c78b1d618335ddc4ecb834af57274
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make QPair an alias for std::pair, and qMakePair just a forwarder
towards std::make_pair.
Why? Fundamentally to ditch a bunch of NIH code; gain for free
structured bindings, std::tuple and std::reference_wrapper
compatibility, and so on.
Breakages:
* Some that code manually forward declares QPair.
We don't care about it (<QContainerFwd> is the proper way).
* Some code that overloads on std::pair and QPair. Luckily
it's mostly centralized: debug, metatypes, testing macros.
Just remove the QPair overload.
* Usages of qMakePair forcing the template type parameters.
There are a handful of these in qtbase, but only one was actually
broken.
* std::pair is NOT (and will never likely be) trivially copiable.
This is agreed to be a mistake done by practically all implementations
in C++11, can can't be fixed without breaking ABI.
Some code using QPair assuming it's trivially copiable may break;
exactly one occurrence was in qtbase.
* QMetaType logic extracts the type names in two different ways,
one by looking at the source code string (e.g. extracted by moc)
and one via some ad-hoc reflection in C++. We need to make
"QPair" (as spelled in the source code) be the same as "std::pair"
(gathered via reflection, which will see through the alias)
when compared. The way it's already done e.g. for QList is
by actually replacing the moc-extracted name with the name
of the actual type used in C++; do the same here.
On libc++, std::pair is actually in an inline namespace --
i.e. std::__1::pair; the reflection will extract and store
"std::__1::pair" so we need an ad-hoc fix to QMetaType.
[ChangeLog][QtCore][QPair] QPair is now an alias to std::pair,
and does not exist as a class in Qt any more. This may break
code such as functions overloaded for both QPair and std::pair.
Usually, the overload taking a QPair can be safely discarded,
leaving only the one taking a std::pair. QPair API has not changed,
and qMakePair is still available for compatibility (although
new code is encouraged to use std::pair and std::make_pair
directly instead).
Change-Id: I7725c751bf23946cde577b1406e86a336c0a3dcf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We deprecated several setters on QSslSocket, no need to test
them then (and I'm removing them in Qt 6 anyway, so changing
the test is the phase 1).
Pick-to: 5.15
Change-Id: I5807abfb280cbacd4fcc19468793f9d1f3b2ff20
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][General] The QtOpenglExtensions module has been
discontinued. It provided only convenience functionality for certain
direct OpenGL usage. With the new RHI graphics API abstraction, that
is no longer a primary use case. Applications that still need to
access that API have a number of alternative options, including
QOpenGLExtraFunctions.
Fixes: QTBUG-84085
Change-Id: I272af61c69ebcec207b576d67d08b59623d485ec
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QString and QStringRef did bounds checking for left/right/mid, whereas
QStringView was asserting on out of bounds.
Relax the behavior for QStringView and do bounds checking on pos/n
as well. This removes a source of potentially hidden errors when porting
from QStringRef (or QString) to QStringView.
Unfortunately, one difference remains, where QByteArray::left/right()
behaves differently (and somewhat more sane) than QString and
QStringRef. We're keeping the difference here, as it has been around
for many years.
Mark left/right/mid as obsolete and to be replaced with the new
first/last/slice methods.
Change-Id: I18c203799ba78c928a4610a6038089f27696c22e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QPromise and QFuture created from it share the same internal state
(namely, QFutureInterface object). QPromise provides high-level
management of the shared resource, ensuring thread-safe behavior
on construction and destruction (also taking into account
QFuture::waitForFinished() semantics).
QFuture acts as a primary controller of QPromise via action
initiating methods such as suspend() or cancel(). QPromise is
equipped with methods to check the status, but the actual
handling of QFuture action "requests" is user-defined.
[ChangeLog][QtCore][QPromise] Added QPromise class to accompany
QFuture. It allows one to communicate computation results and
progress to the QFuture via a shared state.
Task-number: QTBUG-81586
Change-Id: Ibab9681d35fe63754bf394ad0e7923e2683e2457
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
MinGW plugins should not have the lib prefix in the shared library
names. Do this manually for a couple of libraries, and also for the
generic qt_add_cmake_library function.
Amends 9b0e23ef8a
Change-Id: I1cfaf8fc046f86edd3e755adfa599aa0aa854ee3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The default font on Windows 10 (Segoe UI) will return the
wrong minimum right bearing at some sizes, which will cause
us to skip the textWidthVsWIdth() test at some scale factors,
since we cannot trust the layout to be perfect in this case.
Based on experiment, Arial is more accurate, so in order to
avoid skipping the test, we default to this on Windows instead.
(Note: The problem has not been observed with the default fonts
on Linux or macOS, so we only do this for Windows specifically.)
Task-number: QTBUG-84415
Pick-to: 5.15
Change-Id: I8cdb5d0d9922915a6ed1574d62a561dda0e1dc5d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
These methods are scheduled as a replacement for left/right/mid()
in Qt 6 with a consistent, narrow contract that does not allow
out of bounds indices, and therefore does permit faster
implementations.
Change-Id: Iabf22e8d4f3fef3c5e69a17f103e6cddebe420b1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There are some slight differences between normal drawText()
and QGlyphRuns/QStaticText for decoration widths in certain
fonts. We decided to accept this and tried working around it
in the test by using ForceIntegerMetrics (since the difference
is < 0.5 pixel). This enum has been deprecated, so we move
the tests into Lancelot instead, since the idea here is to
test for regressions, not to compare the two painter commands.
Note that there is something off about decorations with
drawGlyphRuns() and drawStaticText() which is exposed
(not caused) by this, perhaps related to using a matrix
for positioning, since that was untested before.
This also takes the liberty of moving the emoji test string
from text.qps, since this was not in the statictext.qps yet.
Change-Id: Ib2d697095cbd11829cdd50b3c0268c85e9607c78
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The code was reading from uninitialized memory when creating a
variant. Fixing that reveals that the test semantics
are broken: when dealing with datatypes without a registered
operator==, QVariant resorts to memcmp, so the two objects
would've actually compared equal. Amend that.
Change-Id: I36bad7ee6a45154d5d534b7dd8b618cc0a900126
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously only qstr*icmp() were tested and the test data was sent via
QString and {en,de}coding. Use a local data-type to package pointers
to actual string literals for passing to these functions that take
them. Fold the various tests involving null pointers and empty
strings into the general testing, removing from "singularity" tests,
and combine the remainders of those tests into a single test of
singular cases for QByteArray::ompare. Move all these tests to
alongside the existing tests for QByteArray::compare. Use nullptr
rather than 0 as the null string.
Change-Id: Ie6d01e839c330c2f960af4bcc95e5633539337d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We don't want to have untested qtbase.
This reverts commit 3598ffcc26.
This change also skips two network tests on b2qt.
Change-Id: I5c6f5e19487775f0a1c0feafa5e085208cbf7e9a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Replace the implementation of blockingMappedReduced():
after calling non-blocking version of mappedReduced() we are getting
the future object, so we may call in sequence result(), which
will block and return the result when the all tasks are done.
The same is done with blockigMapped(), which calls blockingMappedReduced()
with a custom reduce function.
Looks like with this pattern we can reuse the non-blocking version
for implementing blocking version of mapped / filtered methods.
Task-number: QTBUG-83918
Change-Id: I7f240cfbd04834d551ff79d717b72194a26996d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The helper processes were not in the correct location.
Change-Id: I0a80a22a931625ea0c9370db38ff29c881b964cb
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The helper executable needs to be a bundle, because that's
what the test expects.
Change-Id: I7c3f72f12b7a744478b4832685d032abfc679e5b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It's disabled in qmake too, due to being almost all blacklisted
and flaky. Plus locally when i tested, i had to give accessibility
permissions manually, otherwise it failed.
Change-Id: I55ce7a81c46ac28f41c43f5c159fecc22d489966
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Deprecated the pause-related APIs of QFuture* classes and
added alternatives having "suspend" in the name instead.
With 2f15927f01 new
isSuspended()/suspended() APIs have been added to QFuture* classes for
checking if pause/suspension is still in progress or it already took
effect. To keep the naming more consistent, renamed:
- setPaused() -> setSuspended()
- pause() -> suspend()
- togglePaused() -> toggleSuspended()
- QFutureWatcher::paused() -> QFutureWatcher::suspending()
Note that QFuture*::isPaused() now corresponds to (isSuspending() ||
isSuspended()).
[ChangeLog][Deprecation Notice] Deprecated pause-related APIs of
QFuture and QFutureWatcher. Added alternatives having "suspend" in
the name instead.
Change-Id: Ibeb75017a118401d64d18b72fb95d78e28c4661c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Starting from Qt 5.11 QWindow::event is called after QDialog::closeEvent
which would cause a crash if "delete this" was called on closeEvent. The commit
that changed this was e0b5ff4ad5. Added
a check before QWindow::event call utilizing QPointer to prevent the
function call in case object is destroyed by a user in close event handler.
Change-Id: I64a4a0f3271714e55bf7e806177f0d8b39b67fa3
Fixes: QTBUG-84222
Pick-to: 5.15 5.12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QFileSystemModel is the documented replacement. It uses threads to
populate the model, which QDirModel doesn't.
Change-Id: I7818ecd8f849eb566ac176612f382e17a0471c47
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Use 'errorOccurred' instead of 'error' and 'sslHandshakeErrors'
instead of 'sslErrors'.
Fixes: QTBUG-82605
Change-Id: I19d4845b16c7b636af7b0658d4fbbba4eef9d029
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Including other headers, while defining very questionable macro
names, can and will result in trouble. Stop doing that.
While at it, move from including <QtTest> to include-what-you-use,
and clean up the code a bit.
Change-Id: Idb02ef2b612c0805baecac3ce6edd435609aca4c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously it handled Latin-1, which made it incompatible with UTF-8,
which is now our preferred 8-bit encoding. For Qt6 it is limited to
ASCII. Adjusted tests to match. QLatin1String::compare() turned out
to be relying on qstrnicmp()'s Latin-1 handling.
Removed some spurious Q_UNLIKELY()s and tidied up code a little in the
process.
[ChangeLog][QtCore][Important Behavior Changes] Encoding-dependent
features of QByteArrray are now limited to ASCII, where previously
they worked for the whole of Latin-1. This affects case-insensitive
comparison, notably including qstricmp() and qstrnicmp(), and
case-transforming functions.
Fixes: QTBUG-84323
Change-Id: I2925d9908f8654599195a2860847b17083911b41
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This class is designed as C++20-style generator / lazy sequence, and
the new return value of QString{,View}::tokenize().
It thus is more similar to a hand-coded loop around indexOf() than
QString::split(), which returns a container (the filling of which
allocates memory).
The template arguments of QStringTokenizer intricately depend on the
arguments with which it is constructed, so QStringTokenizer cannot be used
directly without C++17 CTAD. To work around this issue, add a factory
function, qTokenize().
LATER:
- ~Optimize QLatin1String needles (avoid repeated L1->UTF16 conversion)~
(out of scope for QStringTokenizer, should be solved in the respective
indexOf())
- Keep per-instantiation state:
* Boyer-Moore table
[ChangeLog][QtCore][QStringTokenizer] New class.
[ChangeLog][QtCore][qTokenize] New function.
Change-Id: I7a7a02e9175cdd3887778f29f2f91933329be759
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since the variable names in QShaderDescription are later compared to
QByteArrays we can gain some performance from not having to convert them
to QByteArrays later.
Task-Id: QTBUG-83706
Change-Id: Iaf80d0966f45cbb09e7c1000b7854bc488e57bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The static observer can live in a union with the inline observers. We
only need to take care of calling the ctors and dtors manually then.
In order for any observers to be called in the presence of a static
observer, the static observer has to be called after the other
observers.
Change-Id: I2f56fa64f3fe6fcd7f06cc403929362da7d86f65
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Windows unexpectedly passes PM_NOYIELD flag in wParam parameter to the
hook procedure, if ::PeekMessage(..., PM_REMOVE | PM_NOYIELD) is called
from the event loop. So, to ignore undocumented flag, we should
interpret wParam as a bit field.
Thanks to Robin Lobel for research.
Pick-to: 5.15
Fixes: QTBUG-84562
Change-Id: Ib16d7d747aebc9a3628e4ee67478c4d3edeb96f1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Create a QMetaTypeInterface for void. This allows us differentiate
QMetaType::Unknown from QMetaType::Void. In addition, this will enable
the usage of QMetaMethod::metaReturnType in QMetaMethod::returnType,
and will facilitate using metaReturnType in declarative, which needs to
distinguish between Unknown and Void.
Change-Id: I83296b49587f3deb7ec73e25a33f0d8c98cf8da0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This does the analog of 46f407126e for the
methods we care about (signals, slots, Q_INVOKABLEs). In addition to the
actual QMetaType, we store an array with offsets so that we later can do
a mapping from methodIndex to metatype.
The newly added QMetaMethod::{return,parameter}MetaType methods can then
be used to retrieve the metatypes.
This does however require that all involved types are complete. This is
unfortunately not a feasible requirement. Thus, we only populate the
metatype array on a best effort basis. For any incomplete type, we store
QMetaType::Unknown. Then, when accessing the metatype, we fall back to
the old string based code base if it's Unknown.
Squashes "moc: support incomplete types" and "Fix compile failures
after QMetaMethod change"
Fixes: QTBUG-82932
Change-Id: I6b7a587cc364b7cad0c158d6de54e8a204289ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
calling emplace() on a std::vector with a reference
pointing into the same vector is undefined behavior.
Fix this by using a temporary inbetween.
Change-Id: I47c28700dffa2107fb0cba302168c86b659eafb3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since QString::split() is not going away in Qt 6, we should aim
to provide API symmetry here, and ease porting existing code from
QString(Ref) to use QStringView.
This is easier than having to port everything to use tokenize() at
the same time. tokenize() will however lead to better performance
and thus should be preferred.
Change-Id: I1eb43300a90167c6e9389ab56f416f2bf7edf506
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was returning a lowercased suffix because it was extracting it from
the pattern (*.txt) rather than from the filename ("README.TXT").
This broke expectations on the application side, since this method is
documented to return a suffix from the given filename.
Ref: https://bugs.kde.org/show_bug.cgi?id=402388
Change-Id: I7dae13db31280249d3f592fa9592c4067804e22d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The idea is pretty simple -- add QRegularExpression matching over
QStringView. When matching over a QString, keep the string
alive (by taking a copy), and set the view onto that string.
Otherwise, just use the view provided by the user (who is then
responsible for ensuring the data stays valid while matching).
Do just minor refactorings to support this use case in a cleaner
fashion.
In QRegularExpressionMatch drop the QStringRef-returning methods, as
they cannot work any more -- in the general case there won't be a
QString to build a QStringRef from.
[ChangeLog][QtCore][QRegularExpression] All the APIs dealing
with QStringRef have been ported to QStringView, following
QStringRef deprecation in Qt 6.0.
Change-Id: Ic367991d9583cc108c045e4387c9b7288c8f1ffd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make the API more symmetric with regards to both QString and QStringRef.
Change-Id: Ia67c53ba708f6c33874d1a127de8e2857ad9b5b8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make the API more symmetric with regards to both QString and QStringRef.
Having this available helps making QStringView more of a drop-in
replacement for QStringRef. QStringRef is planned to get removed in Qt 6.
Change-Id: Ife036c0b55970078f42e1335442ff9ee5f4a2f0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Because setting QFutureInterface to paused state does not mean that
the computations that are already in progress will stop immediately,
it may be useful to get notified when pause actually takes effect.
Introduced the QFutureWatcher::suspended() signal, to be emitted when
there are no more computations in progress, and no more result ready
or progress reporting signals will be emitted, i.e. when pause took
effect. Added {QFuture, QFutureWatcher}::isSuspended() methods for
checking if pause took effect.
QtConcurrent will now to send QFutureCallOutEvent::Suspended event
when the state is paused and there are no more active threads.
[ChangeLog][QtCore][QFutureWatcher] Added a new QFutureWatcher::suspended()
signal, to be emitted when pause took effect, meaning that there are no
more computations in progress. Added {QFuture, QFutureWatcher}::isSuspended()
methods for checking if pause took effect.
Fixes: QTBUG-12152
Change-Id: I88f2ad24d800cd6293dec63977d45bd35f9a09f0
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Since ancient times, tst_QDateTime::fromString_LOCALE_ILDATE() has
claimed to be Windows-only, although there is nothing MS-specific
about it; its name also purports to implicate locale, which it
doesn't. Turn it into two data rows for the more general
fromStringDateFormat() test, with no extra #if-ery about it.
Change-Id: I239c0f80f8f7fa42d498a0f801cc8edfb1db3d8c
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Some fonts misreport the minimum right bearing, and in those cases
we may not be able to do a perfect text layout inside the bounds
set. This is a limitation we have chosen to accept.
To avoid random failure when testing this, we detect the case and
skip the test if we see that it may fail.
Fixes: QTBUG-84415
Pick-to: 5.15
Change-Id: I6b53ea2631c5c6e476e2902b5514829a2141796f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A common pattern in Qt Quick will be QProperty members that are
connected to a callback that needs to perform something when the value
changes, for example emitting a compatibility signal or marking scene
graph node data dirty.
To make such a pattern more efficient, a new QNotifiedProperty type is
introduced that offers the same API as QProperty<T>, with two changes:
(1) The template instantiation not only takes the property type as
parameter but also a callback pointer-to-member.
(2) Since that member itself cannot be called without an instance
and to avoid storing an instance pointer permanently, the API for
setBinding and setValue are adjusted to also take the instance
pointer. For the former it gets stored in the binding, for the
latter it is used to invoke the callback after setting the new
value.
Change-Id: I85cc1d1d1c0472164c4ae87808cfdc0d0b1475e1
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
ExtendedRgb should be treated as Rgb as it can be an automatic upgrade.
Pick-to: 5.15
Change-Id: I2942a1067ed5cacb2f60f303f467887cb44c36dd
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For historical reasons we use build and release instead of create and
destroy. This becomes confusing now that more modules in Qt start taking
QRhi into use. Migrate to the more familiar naming, so those who have
used QWindow or QOpenGLContext before will find it natural.
Change-Id: I05eb2243ce274c59b03a5f8bcbb2792a4f37120f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The name CET is locale-dependent; but QLocale doesn't know about
localization of time zone names. Such abbreviated zone names are, in
any case, potentially ambiguous - various zones around the world have
collisions - so they can't be relied on.
QTimeZone's various backends have differing handlings of how to
abbreviate zone names (MS's provides no abbreviated names at all); and
it appears macOS actually follows the relevant localizations.
So it is hopeless to hard-code the expected zone abbreviations.
Changed the tests to consult QTimeZone for the abbreviation and
compare what it gets with the results of checks which should match
this. This is less stringent, but it is at least robustly correct,
thereby getting rid of assorted kludges and #if-ery.
Pick-to: 5.15
Task-number: QTBUG-70149
Change-Id: I0c565de3fd8b5987c8f5a3f785ebd8f6e941e055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A property alias is the equivalent of the "alias" keyword in QML. It
provides the same API as QProperty, but redirects any access to the
QProperty it was initialized with. When the original property is
destroyed the binding becomes invalid and ignores any further acccess.
Task-number: QTBUG-84370
Change-Id: I0aef8d50e73a2aa9e7703d51194d4c5480573578
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add default parameter for arguments in start, startDetached, and
execute for better source compatibility with Qt 5.15. This has the risk
of then hiding incorrect calls to the previous overload taking a single
"command" strings if code is ported from pre-5.15 or ignores deprecation
warnings. This is acceptable, given that the alternative is that all
calls to these functions would require a default constructed QStringList
as the second parameter.
Change-Id: I1ba4df97ac4894d007da5083c8359015d784ddbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The bold+italic combination indicated by ***triple stars*** requires
this; but it enables combinations of italics, bold, strikeout, anchor
text (and associated link formatting), image alternate text, and inline
code formatting (monospace). A code span overrides the formatting from
surrounding spans (which might be a bug to fix in another patch, if we
compare to how md2html formats code nested in bold-italics for example),
but the format stack restores state when any char format span ends.
Task-number: QTBUG-81306
Pick-to: 5.15
Change-Id: I289556fa53de400eb50a4d159b9b344eafc517da
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously, only the first observer would get notified. Also, make sure
that the notifiers are always retained when switching between bindings
and values.
Change-Id: I9c25c0f2e288dac3a335b68e618f7ddeb44be25a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When QFutureWatcher (or QFutureInterface) is paused, it doesn't
mean that it will take effect immediately: the pending tasks may
still be in progress and keep reporting results. At the moment
QFutureWatcher will queue those events and report only with the
next resume. This behavior is wrong, QFutureWatcher should not
decide when to report events, the sender should decide when is the
right time. There's no benefit in reporting already happened events
with delay. Because of this, even the pause event itself was being
reported after resume.
Fixed the behavior by removing the logic of queueing events when
the state is set to "paused". It seems unlikely that the users of
QFutureWatcher rely on reporting events with delay.
[ChangeLog][Important Behavior Changes][QtCore] QFutureWatcher will not
immediately stop delivering progress and result ready signals when the
future is paused. At the moment of pausing there may be still computations
that are in progress and cannot be stopped. Signals for such computations
will be still delivered after pause, instead of being postponed and
reported only after next resume.
Fixes: QTBUG-12152
Change-Id: I9f0b545ac096578c52cc72d60575c018c01e3368
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
When including files, moc inserts a MOC_INCLUDE_BEGIN and
MOC_INCLUDE_END token into the token stream. Those are already handled
in the toplevel Moc::parse function, but parseEnum lacked support so
far.
Pick-to: 5.15
Fixes: QTBUG-80578
Change-Id: I35c8fd959347d94af20090b3a505dd9e6bfaff88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtCore][QSortFilterProxyModel] Add a 'autoAcceptChildRows'
property to always show children rows of accepted rows.
Change-Id: I2402469ece438179d0f19888b9775cc27cf5c749
Reviewed-by: David Faure <david.faure@kdab.com>
Tests focusProxyAndInputMethods and
multipleToplevelFocusCheck will be blacklisted
Task-number: QTBUG-84259
Change-Id: I7d5baf1e700192eed3c7c8dcfe671e247f11b8c7
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Instead of manual string splitting (EW!), use QDateTime parsing.
Moreover, X.509 certificates *must* have a valid start/end date.
In case of parsing failure, reject the certificate. An autotest
for this last case is coming in a separate patch.
Change-Id: I934bf9e6a4a92e4befdb3b0f9450f76f67bad067
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When storing a void* pointer to the texture handle, we had
to ensure that the variable would exist until the build phase,
which is error prone and caused errors in QQuickWidget because
we copied the texture ID from the FBO into a local variable
before passing it into QQuickWindow::setRenderTarget().
The reason for using a void* was that we cannot know the width
of the handles in the different backends, but we do know that
they are 64-bit at maximum, so instead of storing potentially
dangling pointers, we just make it a 64-bit integer and cast
it back and forth in the backends.
Task-number: QTBUG-78638
Change-Id: I7951e24351ddb209045ab6197d81eb1290b4da67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
resize() to a smaller size does not reallocate in Qt 5 if the container
is not shared. Match this here.
As a drive-by also fix resize calls on raw data strings to ensure
they are null terminated after the resize.
Change-Id: Ic4d8830e86ed3f247020d7ece3217cebd344ae96
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added QFuture::onCanceled() method, for attaching handlers to be called
when the QFuture gets canceled.
Change-Id: I1f01647d6173ba0c1db6641e14140108b33ac7c4
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Introduced QtFuture::connect(sender, signal) function returning a
QFuture object, which is resolved when the signal is emitted.
Task-number: QTBUG-81589
Change-Id: Idbe301eb247b468b9b34f3470c3359d6a7af2f3a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The class is documented as obsolete, and the majority of APIs is marked
as deprecated. In this first phase, remove all explicitly deprecated
APIs and trivial implementations.
The test case is complete removed; what's left when code that uses any
of those deprecated methods is removed is not testing anything
meaningful.
For some methods, there is no practical replacement using QScreen yet,
and QDesktopWidget is still used in QWidget internals. Those require
refactoring to only use QScreen before the rest can be removed.
Change-Id: I8f7c968ec566820077221d37b817843758d51d49
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rather than have a paletteChanged() signal which can be connected to for
tracking when the application palette has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated paletteChanged() signal
in favor of QEvent::ApplicationPaletteChanged.
Change-Id: I95da211e30590e357007cc14d8ee266baceba7b3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Even in Qt 5, remove() can be passed an alias to *this. In Qt 6, with
the advent of substring sharing, this will become even more
pronounced. Use the same fix as was already used in QString::insert().
Pick-to: 5.15
Change-Id: I1a0d3d99fd7dff6e727661646d2cbfdc94df2682
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As best as I can guess, this used the QString::operator=(char), which
I locally removed. Before that lands in Qt, remove this ... wtf?
Pick-to: 5.15
Change-Id: Ie083fe69500d6b5b633416f89f5dd1d7068c20b2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We now assume that source code is encoded in UTF-8 by default on
all platforms (and verify this with an auto test). Provide
a CONFIG+=no_utf8_source option for backwards compatibility.
[ChangeLog][qmake] qmake will tell the compiler that source code is
encoded in utf-8 by default. This mainly has an effect on Windows, where
MSVC still assumes source code is encoded in the current ANSI code page.
Use CONFIG+=no_utf8_source to get back the Qt 5 behavior.
Change-Id: I6dcafcaeefdea7d3907ccb723aeb7d23ccc0f04f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Centralize, rather than keeping adding constructors from any
array-like container.
A more robust implementation, likely following the converting
constructor for std::span ([span.cons]), is out of scope for C++17
and will require C++20's ranges and concepts.
[ChangeLog][QtCore][QStringView] QStringView can now be constructed
from any contiguous container, as long as they hold string-like data.
For instance, it's now possible to create a QStringView object
from a std::vector<char16_t>, a QVarLengthArray<ushort> and so on.
Change-Id: I7043eb194f617e98bd1f8af1237777a93a6c5e75
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It has been the case for both QStringLiteral and QByteArrayLiteral
since Qt 5.0, and Q_ARRAY_LITERAL since Qt 6.0.
Since it's definitely surprising, add a note in the docs, which
is "somehow" consistent with the interpretation of capacity as
the biggest possible size before we reallocate. Since it's 0,
any manipulation of the size will cause a reallocation.
(Alternatively: the capacity() is for how many elements memory was
requested from the free store. No memory was allocated, so 0...)
Task-number: QTBUG-84069
Change-Id: I5c7d21a22d1bd8b8d9b71143e33d537ca0224acd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... without moving the mouse.
This allows to update drop action and cursor.
Task-number: QTBUG-56218
Task-number: QTBUG-82934
Pick-to: 5.15
Change-Id: I8b0ac2a008a9dbcc4c2d6abce282e6f169c2f542
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add an operator QVariant() to QRegExp to keep things at source compatible
as possible.
Add a hack to QVariant::load/save() to recognize the old typeid
for QRegExp and stream them correctly as long as the streaming operators
for QRegExp are registered.
Also move the datastream test for QRegExp to tst_qregexp, and adjust it to
the qvariant changes.
Change-Id: I120b38a7541b43ec07a21b17f7f35c55f071eb75
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replacement methods do now exist in QRegExp, or
for QRegularExpression when porting to it.
Remove all autotests associated with the old methods.
Change-Id: I3ff1e0da4b53adb64d5a48a30aecd8b960f5e633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prepares for the removal of those methods from QString and
QStringList. The new methods in QRegExp are left as a porting help.
Change-Id: Ieffa33a79caf53b83029e9b070c4eb5cadca1418
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move pre/and post condition handling out of the main loop
to make that one as fast as possible.
Remove special handling of a corner case when the input length
is zero, where the utf8 decoder did something else than all
other decoders.
Change-Id: I94992767ea15405b38f7953adadaa6ff98b20b6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just so we can get this cleaned up as well and remove it from
Qt Core.
Change-Id: I2b5b821b039ce2c024ec3cb7338a1a9becdd2157
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no real dependency to QTextCodec in those files anymore.
Change-Id: Ifaf19ab554fd108fa26095db4e2bd4a3e9ea427f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Document QStringConverter, QStringDecoder and QStringEncoder.
In addition, do some touches to the API, renaming one enum value,
add a flags argument to one constructor and make some members private.
Change-Id: I8f99dc3d98fb8860cf6fa46301e34b7eb400511b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QStringConverter instead. Also change the default
encoding of QTextStream to utf8.
Change-Id: I30682e75fe0462d1a937539f773640c83a2d82e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a first step add setEncoding/encoding() methods that use the
QStringConverter::Encoding enum, and port all uses of setCodec()/
codec() over to the new API.
Internally QTextStream still uses QTextCodec, this will be ported
over to QStringConverter in a follow-up change.
Change-Id: Icd764cf47b449b57f4ebd010c2dad89e6717d6c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a replacement for Qt::codecForHtml().
Change-Id: I31f03518fd9c70507cbd210a8bcf405b6a0106b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add method that tries to determine the encoding of the data
from an initial byte order mark.
Change-Id: I348c51a3d4db9b434af53359b739a7e17acfc760
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add static methods that allow converting between a name for an
encoding and the Encoding enum.
Change-Id: I12bc503cf757ea31d3ca8d5e1f1216efddcb16d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a constructor, that allows constructing a string converter by
name. This is required in some cases and also makes it possible to
(in the future) extend the API to 3rd party encodings.
Also add a name() accessor.
Change-Id: I606d6ce9405ee967f76197b803615e27c5b001cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Always encodee INI files as utf-8 in Qt6. This is mostly backwards
compatible, as old ini files would encode all non ascii characters.
[ChangeLog][Important behavioral changes] QSettings will now always
encode INI files as utf-8 (and the iniCodec/setIniCode methods are
removed). This is a change from Qt 5 and earlier, where QSettings would
by default escape all non ascii characters. The behavior is equivalent to
what you got in Qt5 by setting a utf-8 iniCodec on the settings object.
Settings files written in Qt 5 will still be readable in Qt 6 (unless
an iniCodec different from utf-8 was used), but to read Qt6 based ini
files in Qt 5 applications, setting the iniCodec to utf-8 is required.
Change-Id: Ic7dffcca17779bd5e3dae50d42ce633170289f6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Feed the data one by one to the encoder or decoder to
verify that the handling of incremental decoding is
correct.
Change-Id: I565e4f1872e00859026334f7662b6778772e159d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IgnoreHeader was a rather badly defined enum, in addition the
utf8 and utf16 codecs where handling BOMs somewhat different
for stateless decoding.
Fix this by introducing explicit flags for writing a bom when
encoding and not skipping the initial bom when decoding.
Source compatibility for QTextCodec is done with a couple of
static constexpr variables.
Change-Id: I0b2d94f84c937cec1e0494c16ef448c00382691d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove support for setting a codec different from UTF-8
for writing XML files.
All XML readers today can handle UTF-8, and there is no
reason anymore to write a file in a different encoding.
Change-Id: If89fb2d2474a2b55644d9bed7473c11ad91033eb
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
The new QStringEncoder and QStringDecoder classes
(with a common QStringConverter base class) are
there to replace QTextCodec in Qt 6.
It currently uses a trivial wrapper around the utf
encoding functionality.
Added some autotests, mostly copied from the text codec
tests.
Change-Id: Ib6eeee55fba918b9424be244cbda9dfd5096f7eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Handle wheel grabbing via wheel_widget in a single place, and
propagate events in the same way for all (spontaneous) events.
Handle ScrollMomentum the same way as ScrollUpdate to allow
partial sequences.
Fix the incorrect ignoring of wheel events by default; like all
other input events, they are now again accepted by default and
ignored in the default event handler implementation of QWidget.
This way, implementing the handle suffices to accept the event.
Note that QWidget::wheelEvent doesn't need to be changed, as the
event is ignored there today (an oversight of the change made in
f253f4c3, perhaps).
This also fixes changing of direction of a wheel event while
the event sequence is grabbed by a widget.
Change-Id: Ia0f03c14dede80322d690ca50d085898a0497dbe
Fixes: QTBUG-67032
Task-number: QTBUG-79102
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The former messes in bad ways with the overload set (it, fatally,
attracts char16_t, e.g.). The latter was probably added in response to
ambiguities between (char) and (QChar). While it's harmless now,
remove it, since it no longer pulls its weight.
The no-ascii warning is now coming from QChar(char), so the protection
isn't lost.
[ChangeLog][QtCore][QString] The += operators taking char and
QChar::SpecialCharacter have been removed as they cause adding a
char16_t to QString to call the char overload, losing information. The
append() function was not affected.
Change-Id: I57116314bcc71c0d9476159513c0c10048239db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Will be useful when DecompressHelper gets taken into use for both.
Task-number: QTBUG-83269
Change-Id: Iaf253219bed193025c2b82d6609f4dcc4de33df8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also port its callees. These functions scream to the QStringView-ified...
Change-Id: I13c95d65941eb8d02223306d80efd1437b4bd9b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We use the Catch2 testing framework to test Qt Testlib, which also opens
up the possibility of using it for other internal testing once it's made
available through the build system.
The test now has a --rebase mode which will write out the actual results
as new expected files. Once we add the required post-processing to the
results to remove timestamps and other testrun-specific data we can
remove the standalone python script generate_expected_output.py that
today has to be kept in sync with the test itself.
No attempt has been made to clean up the comparison-functions, but
these could all benefit from moving their logic from the comparison
to the sanitization step. This will both make the expected files
more generic, and will reduce the diff once a failure occurs, since
we're not seeing all the hunks that the comparison-functions ignored.
Change-Id: I1769d42e7958d56d1ad5da958db0e8fe3a2a3c23
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Update the auto test accordingly, and at the same time remove
all uses of QTextStream (as they aren't required).
Change-Id: I71b7cf6a6b54ea59507f27d5d2d04cc5ae5885fc
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The fromUcs2() named ctor is designed to replace all the non-char
integral-type constructors of QChar which make it very hard to control
the implicit QChar conversions, which have caused a few bugs in Qt
itself. As a classical named contructor, it simply returns QChar.
The fromUcs4() named "ctor", however, needs to expand surrogate pairs,
and thus can't just return QChar. Instead, it returns a small struct
that contains one or two char16_t's, can be iterated over and be
implicitly converted to QStringView. To avoid bikeshedding the name
(FromUcs4Result, of course :), it's defined inline and thus can't be
named outside the function. This function replaces most uses of
QChar::requiresSurrogates() in QtBase.
[ChangeLog][QtCore][QChar] Added fromUcs2(), fromUcs4().
Change-Id: I803708c14001040f75cb599e33c24a3fb8d2579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This part of the patch changes all remaining occurrences of the local
versions of Orientation to Qt::Orientation.
Change-Id: Ic9ec19b8f069f614061f319abd30841e10cdd626
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
wchar_t hasn't been QStringView's storage_type for a very long time
(at least since 5.10). And in Qt 6, we require char16_t support not
only in the compiler, but also in the stdlib, so drop the guards and
the alternative code paths.
Change-Id: I99f28b575f61c16a2497840708beaa4b54a80f57
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We end up with an absurd situation:
QSslConfiguration conf;
//we set CA certs so that on demand loading is disabled:
conf.setCaCertificates({...});
QSslSocket s;
s.setSslConfiguration(conf);
Q_ASSERT(conf == s.sslConfiguration); // this assert fails.
Pick-to: 5.15
Change-Id: I272bed145434082acc6ead95fe3640d222b21131
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They don't work with std::span, since std::span has neither
const_iterator nor cbegin()/cend().
To fix, perfectly forward the return type with decltype(auto) instead
of mentioning T::const_iterator, and rely on the const-qualfication of
the help::c{r,}{begin,end}() functions' arguments to select the
correct T::{r,}{begin,end}() overload.
Change-Id: I4992d4bd521d2dc0f9ea51ae70cde8286ae543a5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The message to ignore is given in source code, hence UTF-8; it was
being ingested as local 8-bit, which lead to problems when a debug
message wasn't 7-bit clean and the system's native encoding wasn't
UTF-8. Modified QtTest's selftest to check encoding failure.
Pick-to: 5.15
Change-Id: I898744a450115b6d2ee992f1d3b36d8efaeeff7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's documented to be undefined if the number of seconds is outside
the allowed range, but it doesn't hurt for that undefined behavior to
happen to be that the result is invalid. Added a simple test.
Change-Id: I20c3f680c7948b3904f213452272133be77e4d62
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes][QDateTime] Removed all
locale-dependence from QDate, QTime and QDateTime, including the
Qt::DateFormat members that select the formats of the default and
system locales and the toString(Qt::DateFormat, QCalendar) overload,
which only used its calendar for these formats. All toString()
methods now use, and all fromString() methods only recognize, the C
locale's names for days and months. Use QLocale's methods if you need
to take locale into account.
Fixes: QTBUG-80441
Change-Id: I3a8968438741afb00f44262f79659c51e9b06c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It clearly belonged in tst_QDate::toDateTime(), for which it adds a
few more test-case and in which it inspires some further testing.
The new testing of case-insensitivity doesn't work if the format
contains stray non-format characters, so added a new data column to
take care of that.
Pick-to: 5.15
Change-Id: I73619be02091c97024a84cb963c7029e9fd0569a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They use the Qt::TextDate format, so do depend on the feature.
Rename one in the process; nothing in its test has anything to do with
de_DE locale.
Pick-to: 5.15
Change-Id: I2adae5c46e6009c13b433993ed2c3c761a500bfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The native command buffer handle was not updated, so the subsequent
finish() call attempted to record an invalid VkCommandBuffer. The
problem was not present with offscreen frames, only when finish() is
called with a swapchain-based frame active.
Task-number: QTBUG-84066
Change-Id: I9c4cb701c3dbbc28f237d6ae1cbf65aafd1fa95f
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
We checked against integer overflow, but not against overflowing the
QByteArray size limit. That caused a std::bad_alloc to be thrown, which
is bad when decoding unknown data. QCborStreamReader wasn't affected,
since it doesn't merge chunks.
Change-Id: I99ab0f318b1c43b89888fffd160c36f495fada87
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Test the case where reduce function of the form:
V function(T &result, const U &intermediate)
has T and U types different.
Task-number: QTBUG-83802
Change-Id: Ic89396caba16e7e47ae3ec1527e31b8620f1b08c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Get rid of code repetition in concurrentfilter test.
Move tests with initial value next to their original version.
Join new lambda tests into a common functions
testing all possible 16 combinations of
functor / function / member / lambda, as they
test in fact the same function. There is no need
to distinguish lambda case over other cases.
This helps in test readability and maintenance.
Add missing tests for lambdas with a combination
of initial value.
Task-number: QTBUG-83802
Change-Id: I45930c1e18a9e4e561909f46a5cbbdf0ad7ba333
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
If any of the temporary directories and files can't be created, skip the
test. Otherwise, the cleanup routine would recursively delete "/".
Change-Id: I51f908a468be8fd2ebd523ff7ce27a7c78d1b4e2
Fixes: QTBUG-83863
Pick-to: 5.15
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The system APIs expect an absolute "display name" of the file path,
so make it absolute.
The test was overly tolerant in accepting failure, as a QStorageInfo
initialized with a file path that doesn't exist is invalid, and thus
always different from the QStorageInfo of the home directory. Fix the
test to compare only valid QStorageInfo objects, and postpone the check
until the file we want to move has been created.
[ChangeLog][QtCore][QFile] moveToTrash supports relative file paths
on Windows
Change-Id: I94c8cd40c60fde469e38f76a98f867f20c6a0b15
Fixes: QTBUG-84015
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also remove dead code that isn't compiled anymore in Qt 6 builds.
Change-Id: I7a7ae35e61fb2ad9cc21180fb7224357ade1505f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The replacement is to set, and configure, a QCompleter directly via
setCompleter. With the removal of the separate properties in QComboBox,
the configuration of the completer is not maintained if the line edit
is replaced. A QCompleter is created and set implicitly when the line
edit is set, unless the line edit came with a completer. This is what
the auto test verifies as well.
Change-Id: I9a4c73db5e39a2558aad346c0904be6deb4f1cd2
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This amends 23b998fa45, and the commits
3e7463411e and
947883141d. This change restores the
pre-5.13.1 behavior of setFocusProxy to not move focus away from a
previously set focus proxy.
With the previous changes, focus would move away from a proxy when a
new proxy is set, if the old proxy had focus. While there are arguments
in favor of this behavior, it is a change of behavior that shouldn't
be introduced to 20+ years old functionality in order to fix the real
bugs addressed by the initial commits.
Instead, move focus only to the new proxy when the focus widget was
the widget that gets a focus proxy.
[ChangeLog][QtWidgets][QWidget] setFocusProxy no longer moves focus
away from a previously set focus proxy, restoring pre-Qt 5.13.1
behavior.
Change-Id: Icf2ad7cba5b860014aeef91cb274c442a2ab9d42
Fixes: QTBUG-83720
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
We already had this approach for QtWidgets, so to avoid
adding the specific cases every time, we import all the
classes from QtCore and QtGui.
Change-Id: I38dd2eec3bbdfb83f156a48f35a2f4fda44528c7
Pick-to: 5.15
Fixes: PYSIDE-1287
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This file mustn't have changed at all, aside from the copyright headers,
since we switched to Git in October 2008.
Quick check shows the data from W3C is still online:
https://dev.w3.org/cvsweb/2001/XML-Test-Suite/
I didn't check that the CVS server is actually running because none of
my machines even has the cvs command anymore...
Pick-To: 5.15
Change-Id: I4e559af2a9a1455ab770fffd15f4e740114a2433
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Turns out that crashing on purpose is more difficult than it seems. It
should be easy, given how often we do it accidentally...
Let the null pointer dereferencing be the fall back. Some compilers are
too smart for their own good and remove the fault. Instead, let's rely
on raise(SIGABRT) on Unix and on the UD2 instruction on Windows.
Pick-To: 5.15
Change-Id: Ibdc95e9af7bd456a94ecfffd1603f1c9b73b167d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Expected and actual were inverted.
Pick-To: 5.15
Change-Id: Idc3fae4d0f614c389d27fffd15e9fa6a0a8f25e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In that specific wrapping mode, it will first try a normal word wrap. If
it doesn't fit within the specified line width it will discard the
result of that and try WrapAnywhere by calling layout_helper()
recursively. The problem was that at the point it called itself again it
had already adjusted eng->maxWidth:
eng->maxWidth += line.textWidth;
This was not restored, but carried on to the recursive call to
layout_helper(), so the end result was that the maximumWidth would
accumulate text widths from parts of the same line twice.
Due to the same recursive behavior the minimumWidth also had a problem:
It always returned the width of the widest word because it took the
qMax() of the minimum widths of the two passes, (WordWrap and then
WrapAnywhere) effectively making the minimum width always be the width
of the widest word (even though it could wrap at finer granularity).
Pick-to: 5.15
Task-number: QTBUG-77337
Change-Id: Ie7e9c17b157506352c2da38cc7f4a8dfa1283966
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Should improve performance and is going to be required in
the future anyway.
Change-Id: I89d7c50441d2491da1ab0a4d564dcc91f52ade85
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Qt Designer let's you add custom slots and signals to the main
form; they should use string-based connection syntax since the
class is not known in setupUI(). Amends
da3cb1deb6.
Task-number: QTBUG-76375
Change-Id: I5a3a5630f77c812d48db1cdb7a8658a4d2718228
Reviewed-by: Liang Qi <liang.qi@qt.io>
A failure in testlib is apt to imply misleading failures elsewhere, so
catch those first. Likewise, broken tools or corelib break
everything. Put the rest of the list in alphabetic order.
Restructure auto.pro to use conditional SUBDIRS += (in the right
order) instead of setting SUBDIRS to a full list and then doing
conditional SUBDIRS -= for most entries. This more closely matches the
way the generated cmake config does things, although it still doesn't
regenerate cleanly.
Change-Id: Idc15326c3534eb4fdce55394269f2dfbc17fcd99
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As discussed in the mailing list and in the Qt Contributor Summit 2019.
Tested on Linux, macOS and FreeBSD, showing these fallbacks:
OS environment setlocale() call
FreeBSD empty "C.UTF-8"
FreeBSD LC_ALL=C "C.UTF-8"
Linux empty "C.UTF-8"
Linux LC_ALL=C "C.UTF-8"
Linux LANG=en_US "en_US.UTF-8"
Linux LANG=de_DE@euro "de_DE.UTF-8"
Linux LANG=en_GB.iso885915 "en_GB.UTF-8"
Linux LANG=hy_AM.armscii8 "hy_AM.UTF-8"
Linux LANG=ja_JP.sjis "ja_JP.UTF-8"
Linux LANG=ru_RU.koi8r "ru_RU.UTF-8"
macOS empty "UTF-8"
macOS LC_ALL=C "UTF-8"
Versions tested: FreeBSD 12.1, Linux w/ glibc 2.30, macOS 10.14.2.
See
* https://wiki.qt.io/Qt_Contributor_Summit_2019_-_QtCore
* https://lists.qt-project.org/pipermail/development/2019-October/037791.html
Change-Id: Ia2aa807ffa8a4c798425fffd15d97ddb4f35b0ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The proper solution is to use qint32 everywhere, but that is left as
a separate exercise.
Change-Id: Id0c06b102b56a1b3b48dd67c6c29c28da7d1f22d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
