they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
always use normalized path separators, except when running native
commands or printing (note however that the qmake -query output will now
be consistently normalized).
Change-Id: I6ae920c3bc656cb517d1f4e4e5518cf79e002169
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Modify configure.exe to run some configure-time tests and check if
the SSE and AVX compiler features are supported.
The tests themselves required a bit of changes to compile with
MSVC. The include in sse4_2.cpp was wrong. And for whatever reason, it
didn't like the volatile variables, which GCC, Clang and ICC have been
happy with. This should produce no effect in compilation, though: even
dead code must be syntactically correct. We're not running the output.
Change-Id: Ibe5d0904a378a7efed853c7215f88a2ddcefb1b3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Added three new methods, which are meant to be used internally to
configureapp.cpp:
- int platform(): returns an integer representing a platform
- QString platformName(): returns the platform name string to be used when
displaying the license agreement.
- QString qpaPlatformName(): returns the value to be defined as
QT_QPA_DEFAULT_PLATFORM_NAME.
Currently supported names are Windows, Windows CE, QNX and Blackberry. Default
is "Windows".
Change-Id: Ifa4d1b9c02cda956be9becdf8db195d3d494f1d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When trying to detect the target architecture, configure.exe will look for a
file called 'arch.exe'. However, in some situations such as when
cross-compiling on a Windows host to a Unix host, and depending on the
toolchain being used, the output file generated by config.tests/arch may
simply be called "arch" instead of "arch.exe", causing configure.exe to fail.
This patches configure.exe to handle both naming schemes.
Change-Id: I5798f716d732388c707564d4d45c4887ab3d3d9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of saving the ability of the compiler to produce SSE2, AVX,
Neon, etc. code in .qmake.cache (Unix) or qconfig.pri (Windows), move
everything to qmodule.pri. Accordingly, move the DEFINES += settings
to qt_module.prf instead of qt.prf.
This allows us to re-use these settings in other Qt modules (other
than qtbase), if necessary. Though currently the extra compiler
definitions are found only in src/gui/gui.pro. They can be moved
elsewhere when it becomes necessary.
As a side-effect of this change, some other flags are moved from
.qmake.cache to qmodule.pri (on Unix). The flags that are getting
moved should probably be moved anyway.
Change-Id: Ibc3ab0111e148d81870772f9357273660aa93417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Move CUPS code around to create a new CUPS printsupport plugin, this
fixes QPrinterInfo for CUPS which depends on the plugin to work.
It QT_NO_CUPS is defined then the plugin is not built and only Print
to PDF is supported under Linux.
* Move unused genericiunixprintersupport plugin to start new CUPS
printsupport plugin
* Split QPdfPrintEngine to create QCupsPrintEngine
* Remove LPR related code from QPdfPrintEngine
* Move CUPS specific code from plugin base class to derived CUPS class
* Remove forcing CUPS print engine to use PDF mode as PDF is now Native
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove all QT_NO_LPR uses
There is now no CUPS specific code left in printsupport/kernel except
QCUPSSupport which is needed for the dialogs.
Task-number: QTBUG-23060
Change-Id: Ie8fa4512a2424edc8943068e0fa9fb714cc42db9
Reviewed-by: Teemu Katajisto <teemu.katajisto@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: John Layt <jlayt@kde.org>
- Add QWindowsEGLContext usable for ANGLE and Windows CE.
- Add QWindowsEGLStaticContext containing the display
for resource cleanup.
- Add EGLSurface to QWindowsWindow.
- Add a -angle option specifying the path to the external
ANGLE installation to configure, add libraries to
the mkspecs.
Initial-patch-by: Jabot Corentin <corentinjabot@gmail.com>
Task-number: QTBUG-24207
Change-Id: I5f80b1efb6996da7c5d70aa3720f7801c9e4c6af
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
If the system's compiler has extra features on top of the base
settings enabled or if the mkspec or $CXXFLAGS variable included some,
record them.
This will allow us to choose whether or not to use our own special
compilers, based on whether the system default compiler contains it or
not.
Change-Id: I87cada9fab4cfa58846a831d0a7c7b50d8fa87fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For the Unix part, this now obeys the -v option, printing the full
command-line it used to compile, allowing testers to identify why
something went wrong.
Unfortunately, it requires a full compilation cycle, instead of just
preprocessing. Just one more among the many on Unix, but maybe a
noticeable slow-down on Windows.
Change-Id: I654b70d99887e04c96731a5b91be9ad555e4d8fe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The hash value is not correct after choosing a different license.
Also, Unix configure does not report it.
Change-Id: I988fffc923c3894e8141a91fc50747e30e20966b
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
commit d60d98450a adds the support for
unix configure. This commit adds the same for Windows configure.
Change-Id: Ibcc604154fd7d0d9c6112ae5459d9bb842daf180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds the Visual Studio 11 mkspec
and the corresponding changes to configure
and qmake makesystem.
Change-Id: I3a7e82a6f7f90aa0a94dedd493ebaa66bf100923
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QMAKE_RPATHDIR, QT_LIBINFIX and QT_NAMESPACE were previously set in
qmodule.pri on Windows, and qconfig.pri on platforms other than Windows.
Make the behavior consistent, move them to qconfig.pri.
qconfig.pri is the correct file because these variables need to be
visible for _all_ users of Qt, and not only the other Qt modules (the
ones who load qmodule.pri).
Change-Id: I4d517488a80b134a78ebde8d3196bdab3c3ab991
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add some more of the prefix options that are
already implemented to the usage information.
Change-Id: I89ee37ebc6deee8b6a5fd5a1c16d26ae3ead1f30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This doesn't compile with a typical cross-compilation setup, which
generally won't include cups headers. The commit should have been
rejected, but wasn't, due to a bug in the Qt Project CI.
Since it now causes all other modules depending on qtbase to fail their
CI, it must be reverted to minimize disruption while the commit can be
amended and/or the test toolchain updated to include cups headers.
This reverts commit 80f7a38890.
Change-Id: I315ae275b37de358a74af28ab7bd691c9849acba
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
CUPS is the only supported print system on UNIX, LPR/PS support has
already been dropped but some LPR specific code still remains.
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove LPR related code from QPdfPrintEngine
* Remove all QT_NO_LPR uses
* Remove most QT_NO_CUPS uses, use QT_NO_PRINTER where necessary
Some QT_NO_CUPS uses remain in QPdfPrintEngine, these will be removed
in a following change implementing a CUPS plugin.
Change-Id: I439b6fad9cf88c3d24aa48e49475f49ad310dbad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Support mkspecs in subdirectories for cross compilation
under windows. Mkspecs in subdirectories are separated by
slashes.
Change-Id: Id3954cc38df2922b20156589335faad989ec0537
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure.exe's Makefile is created by configure.bat. While severely
lacking, it is what gets executed when the user configures, so
developers modifying configure.exe should use that too.
Change-Id: Ib216889594d08c980bfae6d2dbbb27ee9901375a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Except for the perl sources, just in case.
This helps if you need to open the output files in, say, notepad.exe.
Change-Id: Ibf46b74af2efd6936586650e1405750bfef17952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Let configure generate the QT_QPA_DEFAULT_PLATFORM_NAME in
qconfig.h. This allows us to override the platform name
using a configure argument.
This commit adds -qpa <platform> that lets the user specify
the default platform at configure time. Note that the default
platform is not checked against the tree since plugins are
allowed to exist outside the Qt source tree.
In the absence of -qpa argument, configure checks the mkspec
for a variable named QT_QPA_DEFAULT_PLATFORM. This check is
implemented only in the unix configure because it will be primarily
used in custom mkspecs (devices, boards).
If -qpa argument is absent and the mkspec variable is absent,
the default value is determined based on the OS as below:
Unix - "xcb"
Windows - "windows"
Mac - "cocoa"
QNX - "qnx"
Done-with: Jørgen Lind
Change-Id: I0df31811a1b901a3242bfada1232e596ebda04f4
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a global integer, to be used as a seed for the hash
function itself. The seed is randomly initialized the first time a
QHash detaches from shared_null.
Right now the seed is not used at all -- another patch will modify
qHash to make use of it.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I7519e4c02b9c2794d1c14079b01330eb356e9c65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the library and almost everything got renamed to qml, we
should do so for the debugging support, too.
(CONFIG+=declarative_debug will continue to work for some time
being, but prints a deprecated warning).
Change-Id: I295155dce873e2585c1452d2bf0625ea6ce219c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This change will be needed during migration from QByteArrayData to
QArrayData.
Change-Id: I0c8d6f9ed3ef7c33af62736af55259a8f9a70c0f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Add to list of disabled build parts (see
b9a498bf51).
This fixes the tests are currently built in developer-build
despite "-nomake tests".
Change-Id: I43282112e03328dd89d8c874ca31b0483742ddb3
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The only use of QUrl in qmake, moc, uic and rcc is due to QVariant's
internals, so let's disable it. This means those binaries are now
probably a lot smaller since the parsing and IDNA code don't need to
be present.
Change-Id: Ie156b0817d119b2ba5d3dcb9712a9fea2ee7d4a1
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Needed by QtWebKit now.
Change-Id: I177d8dcf6063a14501f7ba3081b43a29a48661c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
