UnknownRole draws attention from the screen reader
and makes it focus on the unknown item. GroupRole
is ignored and passes focus to child items.
Change-Id: If7b4cd9ec02b1890929a709b84d897f452c39587
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Setting this flag causes scroll event lag, so we want
to keep it off for all widgets that do not need touch
events. QPanGestureRecognizer is installed on all
QAbstractScrollAreas. Prevent it from setting the
flag.
Change-Id: Idd4fcc545ff26377607b56f75db75c2865a5fc82
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Simply say that the behaviour is undefined if you don't do what you must
do. I don't want to introduce a check: it can't be done reliably anyway.
Task-number: QTBUG-30806
Change-Id: Iba1bbbdfe62ffcb133f9c52215efdcc0ee7bd9bd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Some screen readers will pass in child id's that are negative
as response to notifications.
We should always check for negative id's on incoming calls.
Task-number: QTBUG-30792
Change-Id: Idaba3d1931d35ed068cfd9f20e70aa26da427616
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
There may be multiple libraries specified in the mkspec, such as
EGL and Mali, as used in devices/linux-sh4-stmicro-ST7108-g++, so
create an imported target for each one. Also populate the
Qt5Gui_EGL_LIBS variable with all created imported targets. Similar
variables are created for the used OPENGL implementation.
In the case of using the packaged ANGLE library, we already know the
exact locations of the binaries.
This makes it possible for third parties to use the same GL
implementation as used by the Qt build itself. As these are used only
privately by QtGui, they are also added to the DEPENDENT_LIBRARIES
of that target so that they are found for rpath-link usage.
On some platforms (eg Raspberry Pi), multiple include directories must
be set to include egl.h, as the headers it includes for vcos are a
bit scattered.
Task-number: QTBUG-29132
Change-Id: I1126da3d37cd51c88d3670347c8b6405b285efb5
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Keep the content aligned to the bottom when the view has been scrolled
to the bottom and the content is relayouted (for example due to
sorting).
Task-number: QTBUG-30653
Change-Id: I9513e295e276d25ff2068036cd80dbf91314fe84
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fixes regression against Qt 4. This tries to recreate the logic
from 5c46d9a4c85abbcc0b5db2bbbafded3efd784cd9 in Qt 4, where we
on Gnome would override the default hint style specified in
FontConfig with Xft.hintstyle settings. This is the configuration
used for changing the hint style in the Gnome Tweak Tool.
Task-number: QTBUG-29582
Change-Id: I6b9fe2c8ff55ff080d034e5a53fc8cbb49f7651f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
uic doesn't get compiled when -no-widgets is used, so disabling
its test.
Change-Id: I8c81ec468e40841548dacb356fd87ecf85d7b6ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts commit 88272d6c04,
which accidentally re-introduced a crash.
Change-Id: Ie60bcf55f940b24f982eed4f20c6af3320b040a7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When registering m_touchDevice with QWindowSystemInterface, it
will also transfer ownership to it. It will eventually be
deleted in clenupDevicesList on qtouchdevice.cpp.
This patch will also stop the app from crashing when telling it
to quit.
Change-Id: I97070efdf16b4db7d076935fbec62e60f094a7df
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Make sure ImageSSE2.cpp is compiled with the right flags (-msse2)
Change-Id: I410bbd1fd78112d01ebd486908cd22d827e2e472
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Now that the relevant function is available we can do the conversion
inside QMacPasteboardMimeTiff when obtaining an image from the clipboard
Change-Id: Ie41b0fffedf4dd3f8ef49431482bd075a69722b1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The signal needs to be emitted directly as the event is not passed to
the QLineEdit if the QSpinBox gets the Key_Return. Since this signal
may be relied upon then we ensure it is emitted directly.
Change-Id: I17cdec62c9f995bacfd7d3cc66d6324f26c84c67
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Normalize paths that begin with <drive_letter>:/ as well.
Task-number: QTBUG-30638
Change-Id: Icdc7ee9782a358771d06ae2500d32e59e6bbe866
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For most bootstrapped tools, the QT_EVAL code will not
have any effect, because most of the tools don't instantiate
a QCoreApplication. However, qdoc is bootstrapped for cross
compilation, and will instantiate QCoreApplication which
calls the QT_EVAL code. Since the QT_EVAL code requires QObject,
and QObject requires moc, it does not make sense to compile the
eval code into the bootstrap library. Instead, we simply disable
it to make sure the build succeeds.
Change-Id: I472803572b070df041014d337c23d3f3dc0749e4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Invoke slot "beep" on QPlatformNativeInterface. Implement for
Windows and X11.
Task-number: QTBUG-30416
Change-Id: I2be651165b899e5147818a012001d354827bb090
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Add QWindow::alert() and QPlatformWindow::setAlertState().
Add logic to clear alertion state when the window becomes
active. The platform plugins then only need to implement a setter
and a cheap getter and need not handle activation.
Prototypically implement X11 and Windows.
Task-number: QTBUG-30416
Change-Id: Ia70c4722d812462a21f4034b7d52735c9f2bc49c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
That would set the full screen window in a weird state, where is was
full screen (but unable to exit that mode) and showing the title bar
at the same time.
Change-Id: I3ac913876f3b326504dd5af18c34181d002509d0
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
the warnings should have been acted upon before 5.0.
Change-Id: I20a4673d7ec80e0252aa39289c6718fe80799de7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the plugandpaint example statically links to one of the plugins, so
there is a build-time dependency.
Change-Id: I9c77b5641028e6b958ceeea56c606bda59f396b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
somehow this was missed when the source installs were automated.
Change-Id: Ic842fd9ac221cb3748b5a6369eacf8a55f8d8d4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the // operator is a tad too new.
Task-number: QTBUG-30637
Change-Id: I3672d41a4a17937ffea251f0937b09045d6c386d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-21150
Change-Id: I14c214e9f96892f0da4369e7253e363b7313c252
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Xcode builds projects for armv7s if a compatible device is set as
target device. If trying to include <QtCore/QtCore> into such
projects, the build fails complaining about "the usage of sizeof missing
QMutexData definition in qgenericatomic.h"
The reason is that qprocessdetection.h fails to pick up that we're
building for ARM, and includes qatomic_gcc.h instead of qatomic_armv7.h.
So we need to check for __ARM_ARCH_7S__ as well. In addition,
iPhoneOS6.1.sdk/usr/include/arm/arch.h will define _ARM_ARCH_7 if
any of the more specic ARM defines are defined, so I add this check
as well to more easy support new version of ARM7.
Change-Id: Ic51a4d7ac99f7f6ba1065f870b3ef82d1250b56c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If building angle ourselves, that's just the basic Qt include dir,
and if using an external gl, look for it in the places specified
in the mkspec.
As the qopengl.h header includes the gl header, this is a 'public
include dependency' of QtGui, so it is added to the relevant
variable and the INTERFACE_INCLUDE_DIRECTORIES of Qt5::Gui.
Change-Id: I8c2c1782e0a2600032771175444b087da28433fc
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In qtbase commit 7ac58d1ff0 (Make cmake
packages installed to /usr non-relocatable., 2013-02-11), we made
cmake config files non-relocatable if they were installed to
the /usr prefix. That was assumed to mean that this was a distro
or platform package, and was a workaround for the usr-move problem
on Fedora and ArchLinux.
However, cmake bug http://public.kitware.com/Bug/view.php?id=14041
showed that forcing absolute paths in this situation is not desirable
in cross compiling scenarios. CMake commit 6c613b433c45efb0bb013a6bd668cbb8ac740259
(Handle usr-move without forcing absolute paths (#14041), 2013-04-03)
addressed the problem in CMake, and this commit is an equivalent.
Change-Id: I065a6230bc618aa980fae6ca511ae10df4cd62c2
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As it stood, we always relied on the root view controller
being a QIOSViewController if isQtApplication() returned
true. For mixed application, this might not always be true
as native code can choose to replace the root view controller
at times, or even rip it out, and place it as a child of
another (e.g UISplitViewController).
This change will give an extra protection against that.
Change-Id: I0cb85796a8b82f9037c32f9e85e04e1dc7aad8e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
A number for groups, including 'all-examples' was defined multiple
times by some examples. This change fixes the incorrect
definitions.
Change-Id: I2fb5da11e8762698942a076e0f0576033ce3cabc
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This change adds words from the module name (QHP 'project' name defined
in .qdocconf files) as tags for the module's examples. This makes
searching for examples easier in Qt Creator: For example, typing
'multimedia' will list all examples in Qt Multimedia and Qt Multimedia
Widgets modules.
Other minor changes:
- Exclude 'qt' as a tag (not needed)
- Exclude one-character strings as tags
Task-number: QTBUG-28720
Change-Id: I53751b7a87ff39ee7b648f865c9090c52444de76
Reviewed-by: Martin Smith <martin.smith@digia.com>
Unless we enable those buffers for the FBO that backs the
backingstore, setting a clip region on an associated QPainter
will not work.
One apparent bug from this was the menubar. Without this patch
it appeared to never be drawn. The reason was that we ended up
drawing the menubar background over the whole menubar instead
of inside the clip region.
Change-Id: I25660cec6ce9e43fe4cd693127dca6afeb8dcf65
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In 1b08e0307d, I removed the null check
by accident. It's possible for the Darwin API to return a null
property list.
Task-number: QTBUG-30760
Change-Id: Iaf0125767fe4b47c19810b70483a5219e94e4305
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Followup to 7b9d4531 - the second part refactors
to call setDevicePixelRatio but the call itself
was left out.
Change-Id: I3e36452603fe1d7d53fa1a74d87169efea1c2e78
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
We are passing a QSslConfigurationPrivate that is allocated on the stack
(in QSslSocketBackendPrivate::initSslContext()) to
QSslConfiguration::QSslConfiguration(QSslConfigurationPrivate *dd).
When the SSL context is destroyed, this object is not there any more.
So now we create a deep copy of the configuration like we do in
QSslSocket::sslConfiguration().
Task-number: QTBUG-30648
Change-Id: Iaefaa9c00fd6bfb707eba5ac59e9508bf951f8a5
Reviewed-by: Richard J. Moore <rich@kde.org>
Shown for example by Qt Designer.
Change-Id: Ia866a93a781a027aa3703f44314954888d75d436
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We now use an absolute path, to prevent picking up the wrong plutil binary.
In addition we pipe the possible stderr output of plutil and xpath to the
null device, so that the final QMAKE_MAC_PLATFORM_NAME will be empty in
case of any errors, and caught by the isEmpty() check below.
Change-Id: I8ad24bf63162a76410c2ae223dd2fc48e7886bbf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Those with a null object pointer and those with a
null rect.
Change-Id: I40e0c435ee768fc8c58098fec131eb65e89d76f2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Change-Id: I7d308a869fdc729bd46ace336b71c7e30556d65d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Apply the logic from commit d7ae34fdfd
(List the Release library before the Debug library in cmake files.,
2013-02-21) to the Qt5::WinMain library too.
Task-number: QTBUG-29186
Change-Id: Ie465fef1cc0fc842d86c5bc69ab84ec65ec652d9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
