Similar to the changes made for tst_QLibrary:
0ac09c40f2
but even less intrusive.
Change-Id: I4bc0ba385e639f07f9b39cf8ba9542c27be8a3ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Writing out one test result per line in the test data files is
excessive and only bloats the log, given that this algorithm
is rarely changed.
Task-number: QTQAINFRA-2037
Change-Id: Ib9e568c7ded73d45e4b64671e97d5581a74f8f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes ambiguous template instantiation for types that derive from both
a QObject and Q_GADGET. For such types we treat them only as QObjects
as they extend the functionality of the gadget.
Task-number: QTBUG-68803
Change-Id: Ic42766034e14e5df43c4e6f7811e2c0be1dc7e74
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
To make the minimum amount of changes:
- Extract the library files into the expected hierarchy.
- Introduce a variable with the path to the directory.
- Make the static function a member function so it can use the variable
Change-Id: Ibf3106c3606d198a8deb8cb2a5cbde57207221c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a display is placed above a primary screen which has the top left set
to be 0x0, then menus that are defaulting to go up can still be
displayed on that screen when the menubar is placed on the bottom of it.
This ensures that this is the case and also adds a manual test to aid
verification of it in the future.
Change-Id: Ib657ccdc1aabfe1586c72585c087ac80a6c632c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Adding references where applicable, as removed by
023a818738 when removing stale example.
Add example run snippet to the example landing page.
Remove stale example qdoc file that is superceded by current example.
Task-number: QTBUG-69191
Change-Id: I62dc66edc86da5efb4c79fd124edb2fa619aeb6b
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
For performance, the triangulation of a painter path is stored for
reuse. Re-triangulation was only done if the path was to be painted at
a significantly different scale AND it contained a curve (bezier)
element. But also the triangulation of a path with only straight lines
can lose precision if rendered at a small scale, and so look bad when
used at a higher scale factor.
Fix by removing the mentioned curve element condition.
Task-number: QTBUG-68873
Change-Id: Id3492514e9382a5828377b7bafea8cfac7b850a6
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
.qdoc files should only be licensed under FDL (for documentation) or
BSD (if they only contain code).
Change-Id: I2a8a5b2c7bd3f927b8f71506c3672bc4916aca1e
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
The automatic showing/hiding of the built-in on-screen keyboard in
touchscreen-based Windows computers, like the Microsoft Surface line,
has stopped working after recent Windows updates. The OSK no longer
seems to rely on UI Automation properties to detect text widgets.
However, it can be triggered by showing an invisible caret.
Task-number: QTBUG-68808
Change-Id: Ia604d21e314965dcdc61f1ced050cc3ed771f567
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "app" subfolder was already excluded in the .pro-file but Android
supports QProcess, so lets include it in the build. Unfortunately it
currently has trouble and crashes (the child process or both processes).
So we skip those tests.
Task-number: QTBUG-68596
Change-Id: I2e6d0869c408bf08b22c02145db8ce522c64c617
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Same issue as has been seen a few other places: path to executable being
wrong, and then a crash when the paths are fixed.
Change-Id: I77a596c6e52d2a02a69a6b9dfe91f878b3ffe07c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Tell qtwaylandscanner to export the symbols when we're building a
module. This is done by specifying the include directory on the
qtwaylandscanner command line.
Task-number: QTBUG-68773
Change-Id: Ib575222261831ab01eb43e6c7caefb07e314492b
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
The documentation for match() indicates that the index has to be valid
since it determines which column to search in (in addition to "from
which row"). So call match with a valid index, if the model isn't empty.
Change-Id: I5f3754cf14d053bf04d207cefe7dcc938e0f4a5a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Instead of caching the last index of a search for a child item, cache
the index of the child in the child item. When the item model is not
changed, the index is valid. Otherwise, the index can only change when
items get inserted or removed before the child. So in that case, start
searching in the vicinity of the previously known index.
As an example: a selectAll() on the view will always hit the cached
index, so no search is performed for any item in the model/view.
Task-number: QTBUG-61368
Change-Id: I85d085299987237fae23451d9e8bbb6060464ef2
Reviewed-by: David Faure <david.faure@kdab.com>
Previously, the search for the index of a child was done by searching
forwards (minus 2) from the last search, and subsequently backwards when
it wasn't found. This would cause quite some searching in models with
lots of items, and where the child lay before the last search.
We still assume that subsequent searches for children are "nearby" the
previous search, but instead of first searching forwards and then
backwards, do the search in both directions.
Task-number: QTBUG-61368
Change-Id: Idb549c2d02840632cd658f906816ce911f3ff8bc
Reviewed-by: David Faure <david.faure@kdab.com>
The code (in macros) uses these classes, so the header should ensure
they are defined.
Change-Id: Ic68fa5559b7c0481927b47775b9cb7da12be7979
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
When testing zones "America/Mazatlan" and "Mexico/BajaSur" the test
crashes from an assert. Skip testing the zones for now.
Task-number: QTBUG-69132
Change-Id: I595089647792e9a2c094d63cb837584b8cdc9cb9
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Fix warnings about invalid function type casts (return types
conflicting with the PROC returned by wglGetProcAddress()) like:
qwindowsglcontext.cpp:1250:138: error: cast between incompatible function types from 'PROC' {aka 'long long int (*)()'} to 'GLenum (*)()' {aka 'unsigned int (*)()'} [-Werror=cast-function-type]
m_getGraphicsResetStatus = (GLenum (APIENTRY *)()) QOpenGLStaticContext::opengl32.wglGetProcAddress("glGetGraphicsResetStatusARB");
by introducing nested casts.
Task-number: QTBUG-68742
Task-number: QTQAINFRA-2095
Change-Id: I7c51836f2b9f7e2a6fa17c5108d59b23c42fb99d
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Generated headers can now be installed using inject_headers and private_headers
instead.
Change-Id: I51d98e2e05d12aa9f6ab09f8ccb12b81a0c0cd6f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Skip a few tests that Android's time-zone information doesn't suffice
to get right.
Task-number: QTBUG-68835
Change-Id: Ibf8d213c96b29d74fc478a0ede686ae52b5200fb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Where possible. Sometimes the replacement is QTRY_COMPARE instead.
Also don't use QTestEventLoop directly when it can also be replaced with
QSignalSpy use.
Remove the TimerHelper class, since its uses can be done with QSignalSpy (and a
lambda when remainingTime is checked). Although checking static single-shot
timers still needs a target object, so use a stripped down version in those
tests.
remainingTimeDuringActivation() was not actually testing the repeating case, but
single-shot case twice, so fix that. In the repeating case the remaining time is
exactly 20 ms on my machine, but QEMU emulation seems to be slow enough for time
to advance before the lambda is executed, so relax the conditions.
Task-number: QTBUG-63992
Change-Id: Iae92ff7862a13d36e695eec63b54403ec872f2b4
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Ignore synthesized mouse move events whithout the left mouse
button pressed. We receive such mouse move event on touch
before the mouse press event, it causes the menu to show
and then the subsequent mouse press event closes the menu.
Also don't propagate mouse events after closing a popup
to another popup, because they may close the latter one.
Change-Id: I50a2d9b57da63d33ffe416161a09f1696d65c88f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Fix warnings about invalid function type casts (return types
conflicting with the FARPROC returned by GetProcAddress()) like:
corelib\global\qoperatingsystemversion_win.cpp💯48: error: cast between incompatible function types from 'FARPROC' {aka 'long long int (*)()'} to 'RtlGetVersionFunction' {aka 'long int (*)(_OSVERSIONINFOW*)'} [-Werror=cast-function-type]
io\qlockfile_win.cpp:158:85: error: cast between incompatible function types from 'FARPROC' {aka 'long long int (*)()'} to 'GetModuleFileNameExFunc' {aka 'long unsigned int (*)(void*, HINSTANCE__*, wchar_t*, long unsigned int)'} [-Werror=cast-function-type]
by introducing nested casts.
Task-number: QTBUG-68742
Task-number: QTQAINFRA-2095
Change-Id: I3a5d2ea901bf5dc35963c589d61cf3dc7393377a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
these characters can appear in file names, but are meta characters in
dependency context. they have different semantics in make commands, so
this required some reshuffling in the windows generator (which just
treated dependencies and commands the same way).
we don't actually escape colons for nmake, because it has magic
treatment of drive letters anyway (and colons cannot appear elsewhere).
also, if a target's filename gets quoted, batch rules will blow up.
therefore, "funny" file names are really only supported as inputs -
which is just enough to make resource embedding work.
Task-number: QTBUG-22863
Task-number: QTBUG-68635
Change-Id: I473b0bf47d045298fd2ae481a29de603a3c1be30
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
following the same mechanism as qpa headers, one can specify a list of
regexes in the @private_headers variable in sync.profile.
Change-Id: I5de0284e639ad283561f54dba7dda8c6437b23f8
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QSpdyProtocolHandler requires the features http and ssl.
This fixes the moc warning
src/network/access/qspdyprotocolhandler_p.h:0: Note: No relevant classes found. No output generated.
for the -no-ssl build.
Change-Id: I915751e98fc67e8601a8da8c5d18b11304bc0390
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
If CONFIG option no_include_pwd is set, moc does not add the build
directory to its include path. The path to the generated
moc_predefs.h file is by default relative though, resulting in
moc warnings:
Warning: Failed to resolve include "debug/moc_predefs.h" for moc file xxx myheader.h
Fix this by always making the path to moc_predefs.h absolute.
Task-number: QTBUG-69087
Change-Id: I8ef79c8340f9ebd6b0bba15e026d65ef3c088535
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A follow-up of 9d078c8f147ea875e862360b0d7480201fbbcff7 in qtqa repo.
Change-Id: Ib7c1f5cf325e9ad0066aae139b0dc72bc0184b32
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
And disable menu actions for functionality that's not available.
Task-number: QTBUG-68168
Change-Id: I153487860e8dda8271ae04e9cd2ad8b26a4b130f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This greatly reduces how often we reset the scroll evaluators,
especially with non-focused windows in KWin which sends an enter for
every wheel events in that case.
The update of the evaluators also has race conditions with the normal
events, and thus reducing them fixes odd scrolling behavior with rapid
firing mouse wheels.
Task-number: QTBUG-42415
Task-number: QTBUG-68734
Change-Id: I1c14ca3352bf9c6e57e47ad3aaee1712fe6ba30b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
