Commit Graph

35305 Commits

Author SHA1 Message Date
Frederik Gladhorn
a72b6fe676 Blacklist tst_QtConcurrentMap::qFutureAssignmentLeak
This test was blacklisted in 5.10 on opensuse, but it fails a lot on
ubuntu as well. While we are discussing a real fix for this, temporarily get this out of
the way.

Task-number: QTBUG-63152
Change-Id: I4f1d3b261013052636ee13eda30f94b647a43a38
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2018-02-09 18:45:28 +00:00
Sami Nurmenniemi
c19d532393 Fix tst_QTcpServer::maxPendingConnections flakiness
Task-number: QTBUG-63152
Change-Id: I5ccd07f31d47048d81e85f69e1327f4f7c760257
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
2018-02-09 18:45:25 +00:00
Sami Nurmenniemi
9ac09dcc68 Blacklist flaky cases
Task-number: QTBUG-66216
Change-Id: Iae973c1224c940752e2c3162d8c64539966ff7ac
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
2018-02-09 18:45:23 +00:00
Sami Nurmenniemi
44402f5075 Skip tst_QDBusAbstractAdaptor peer tests
The peer Tests for QDBusAbstractAdaptor are so flaky that it's
very difficult to get any commits through to qtbase.

Task-number: QTBUG-66216
Change-Id: I8da80f71aa832e683f72129cb2d4785425d39c00
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
2018-02-09 18:45:15 +00:00
Andy Shaw
c48f4bde00 Set the ellipseDiameters back to the original size in QGraphicsView
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.

Also add a manual test for visually checking the ellipse diameters on
various devices.

Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
2018-02-08 21:25:01 +00:00
Andy Shaw
83b0abf928 Use the right attribute when checking if shortcuts are shown
Change-Id: I784965dda64551e6093af817881aa6472d2cc226
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
2018-02-08 21:24:50 +00:00
Friedemann Kleint
b624cdac21 tst_QSharedPointer: Fix termination of external processes on Windows
Timeouts with subsequent failures to delete the temporary
directories have been observed in COIN.

Previously, QProcess:terminate() was used to end the processes,
which does not have any effect on console processes on Windows.
Add a helper function which resorts to kill() on failure
to terminate().

Change-Id: I05539d1703280d34b392f2e8ff8565b9a04d703c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-08 19:56:03 +00:00
Andy Shaw
6c6ace9d23 psql: Improve performance of record()
In order to save having to always run a query to get the tablename for
a known oid then we cache the result on the driver side. The oid stays
the same while the table exists, so only on dropping it would it change.
Recreating the table causes it to get a new oid, so there is no risk of
the old one being associated with the wrong table when this happens, if
the driver is still open at that point.

The benchmark added shows the improvement from the previous code, before
the results for PostgreSQL was:

RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
     259 msecs per iteration (total: 259, iterations: 1)

whereas now it is:

RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
     0.000014 msecs per iteration (total: 59, iterations: 4194304)

Task-number: QTBUG-65226
Change-Id: Ic290cff719102743da84e2044cd23e540f20c96c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
2018-02-08 18:24:48 +00:00
Tor Arne Vestbø
fe5ba70e55 Prevent duplicated log output when using alternate logging sinks
3d02e75c07 was too quick, and didn't account for the fact that the
old code had early returns for each alternate logging sink, so when
removing the qt_logging_to_console() check, we would end up writing
debug output twice.

This is due to e.g. Qt Creator running the application without a
console, so qt_logging_to_console() returns false, so we end up
in e.g. the win_message_handler(), calling OutputDebugString,
but then we unconditionally print to stderr, which Creator
also reads, so we end up with duplicated log messages.

Change-Id: I91573828576608643477ae27d36d7e819f92985d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-08 16:59:17 +00:00
Tor Arne Vestbø
7ec9813490 Fix inverted logic in slog2 log handler for when to disable logging
If we are logging to the console, we should _not_ log to slog2, like
the other log backends.

Change-Id: I6d16704c0f0923f54b3dc030d374af9805c2af06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-08 16:59:16 +00:00
Oswald Buddenhagen
f1d227bceb Bump version
Change-Id: I668f25fddaf597db4b3b5537379acd3a2f4c4f8f
2018-02-08 17:07:19 +01:00
Adam Treat
36171af399 Make use of our egl convenience code for QNX QPA
This fixes various problems that occur because the current egl context
assumes OpenGL ES 2.0 and does not support newer versions of ES.

Task-number: QTBUG-64306
Change-Id: I81466ba5cf028b47ca5a2ebcdc702167aff655a2
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
2018-02-08 01:28:41 +00:00
Johan Klokkhammer Helsing
96bf3b7a74 eglfs_kms_vsp2: Try to recover when failing in the middle of a blend
Blending can fail if one of the input buffers is destroyed in the middle of the
streaming operation. In that case, turn streaming off so blending can be
attempted again after disabling the input.

Change-Id: Id5c82b22a2ed0858ab20902395830efa0e64177d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
2018-02-07 20:29:34 +00:00
Antti Kokko
41bcb31ab9 Add changes file for Qt 5.10.1
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I9f3c5a830d210e1224ffbc69979733ec7cf629c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-07 16:13:26 +00:00
Richard Moe Gustavsen
75c22d4598 QCocoaWindow: be more careful when flushing events
Flushing the QPA event queue is problematic since we can then end up
delivering several events to Qt (or the app) at the same time on the
call stack. This again can easily leave objects in an inconsistent
state if they receive callbacks from subsequent events while being
occupied processing the first.

This is also what happens in the listed report. A QMenu shows
a sub menu when the mouse enters a menu item. The show leads to
QPA flushing events, which in some cases also includes flushing
another pending move event. The move event is delivered to the
same QMenu, which will clear a private variable (currentAction).
When the show returns, the state of QMenu has unexpectedly
changed, which causes a crash to happen since currentAction is
null.

This patch will fix the root cause of the problem by
stopping QCocoaWindow from flushing user input events when
the call location does a flush to deliver geometry events.

Task-number: QTBUG-66093
Change-Id: Id277550b0a080ad98c81e8c30dc7098dc73723d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2018-02-07 16:12:53 +00:00
Liang Qi
3061730c2a Merge remote-tracking branch 'origin/5.9' into 5.10
Conflicts:
	src/plugins/platforms/cocoa/qcocoamenu.mm

Change-Id: I11c5f8466c5b51e13e5ef6a8fc6e3f2dd79122a7
2018-02-07 14:45:46 +01:00
Andy Shaw
3d35501591 Update bundled sqlite to 3.22.0
[ChangeLog][Third-Party Code] Sqlite was updated to version 3.22.0

Change-Id: I341c1cabfdd43fac45406c00c33c193ef4bcf402
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
2018-02-07 12:23:18 +00:00
Tor Arne Vestbø
ce8e72d040 Android: Defer initialization of logging rules until qApp construction
On Android, we load the application library, and its dependencies (Qt),
on Android's main thread (thread 0), and then spin up a secondary
thread (thread 1), that we call main() on.

If any QObject is constructed during loading of the application library
or any of Qt's libraries, via static initializers or constructor
functions, we will set QCoreApplicationPrivate::theMainThread to
thread 0, which will confuse Qt later on when it's being run on
thread 1, and will result in a warning during QCoreApplication
construction:

 QApplication was not created in the main() thread

This situation can easily lead to a crash as well.

Unfortunately logging via qDebug/qCDebug and friends will trigger
this too, as they internally use QObject.

Fixing the root cause of this is under investigation, but for now
we will partially revert fa2a653b3b for Android. The effect
is that any qCDebug with a "qt.*" category before qApp construction
will turn into a no-op, like it was before fa2a653b3b.

This patch does not cover the case of a regular qDebug, or a qCDebug
with a non-Qt category. Those will still produce the same symptom,
as before fa2a653b3b.

Task-number: QTBUG-65863
Change-Id: I95675731d233244530d0a2a1c82a9578d5599775
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 538b1b5076)
2018-02-07 11:19:44 +00:00
Tor Arne Vestbø
efd5d7a837 CoreText: Make sure to keep reference to data when cloning raw font engine
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.

Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
2018-02-07 10:41:12 +00:00
J-P Nurmi
fef6b31b99 GTK: fix menu positioning on high-DPI
The target position is passed in physical native pixels, so call
QPlatformWindow::mapToGlobal() instead of QWindow::mapToGlobal().
The latter operates on logical pixels.

Task-number: QTBUG-55251
Change-Id: I789128a0a345d4113fced82ed1b215fe14044634
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
2018-02-07 05:59:52 +00:00
Oliver Wolff
0307bfea31 ANGLE: Remove workaround for files having the same name (Debug.h/.cpp)
With object_parallel_to_source the workaround of making copies of the
files and using these is no longer needed.

Debug2.h and .cpp were added to the repository by mistake and should not
have been there in the first place.

Task-number: QTBUG-66059
Change-Id: Ib9dbd15be1dee1cb5190762fe06bad56dd40dd47
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2018-02-06 06:17:39 +00:00
Allan Sandfeld Jensen
c0948d508e Add drawTexture benchmark
Change-Id: I086106adb49eca511d52c6b6b5cff5d72309f77c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
2018-02-06 01:28:26 +00:00
Allan Sandfeld Jensen
fd80b8aaeb Unalias some core drawhelper loops
Some compilers will assume src and buffer are different and only
vectorize the unaliased case and take a slow path when they are equal.
In our case they are as often equal, so we need to manually unalias the
variables to make sure both cases are fully optimized.

Change-Id: I6ec86171dd179844facdf45376253c55980d9e36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-06 01:28:16 +00:00
J-P Nurmi
1cc15c4b6d QComboBoxPrivate::showNativePopup(): Scale target rectangle
The QPlatform* classes operate in native pixels.

Task-number: QTBUG-55251
Change-Id: I80490fa802fbc77a1e02c176528cc047630f9a7d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
2018-02-05 21:35:21 +00:00
J-P Nurmi
1ffc6ba402 macOS: fix menu positioning on high-DPI
The target position is passed in physical native pixels, so call
QPlatformScreen::availableGeometry() and QPlatformWindow::mapToGlobal()
instead of QScreen::availableSize() and QWindow::mapToGlobal(). The
latter two operate on logical pixels.

Task-number: QTBUG-55251
Change-Id: I281f47baee727bc0f4738fd6d6cdf12c9f462b0f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2018-02-05 21:35:15 +00:00
Gabriel de Dietrich
2cb1db6437 Document several WA_Mac attributes as obsolete
All of these had already no effect.

Cleaned up a bit of code around old Qt 4 #ifdefs and
documentation mentioning Carbon.

Change-Id: Id2858c56a5785f82c47e20e1e760743fb4d08189
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-02-05 19:45:24 +00:00
Gabriel de Dietrich
4a55eb0e3a QMacStyle: Remove call to HIThemeDrawSeparator
It looked inverted for some reason. A single line looks
better than before.

Change-Id: Icb214b44ddcc6e9e57fe12e7b4c3f512a5f66452
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-02-05 19:45:15 +00:00
Gabriel de Dietrich
14c4fe8037 QMacStyle: CE_DockWidgetTitle is now HITheme-free
Change-Id: Id2e23d37e9b87f89fc40e0d774c628eec91a986e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-02-05 19:45:08 +00:00
Gabriel de Dietrich
3de8e74d77 QDockWidget: Use theme font for title
While the QPA theme provides support for dock widgets
title font we never use it.

This is a very similar solution to what we do in
QMdiSubWindow, setting the platform theme font at
few specific points.

This patch also fixes the dock window title font on
macOS, as queried in QCoreTextFontDatabase.

Change-Id: Ie264e4e83e0d3d1e8f78bd378359f3063cc1d525
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-02-05 19:45:03 +00:00
Gabriel de Dietrich
347cfa00a2 QMdiSubWindow: Hide "system" menu icons on macOS
Not only they should not appear (icons in menus is a special
thing on macOS), they don't match the look on the window frame
buttons. So, it's better to hide them completely.

Change-Id: I8814ed3e128480abff4f53fdd40a0bb13f1796ef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-02-05 19:44:57 +00:00
Gabriel de Dietrich
8633e1a7b4 QMacStyle: QMdiSubWindow is now HITheme-free
There are a couple issues. Because the actual class for
the buttons returned by +[NSWindow standardWindowButton:
forStyleMask:] is private, we can't fully configure them
as we could with HITheme. Therefore, we don't get the
mouse hovered state and the zoom button will show the
fullscreen arrow instead of the '+' icon.

Hopefully, QMdiArea will go the way of the dodo soon
enough. It is not a thing on macOS and it has been
replaced by tabbed windows UI on most desktop apps.

Change-Id: Ia581f72611ad0224f42657afbc4d9f94bf5e5a3a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
2018-02-05 19:44:50 +00:00
Gabriel de Dietrich
80515c811a Introducing SH_SpinBox_ButtonsInsideFrame
This is currently only used in QMacStyle since,
on macOS, the spin-box buttons are always beside
the line-edit. Hence, there is no need to tamper
with the line-edit frame.

Change-Id: I8ccfbab547fccae89a8ddeaeb7005cb17d5951e6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
2018-02-05 19:44:35 +00:00
Gabriel de Dietrich
3d29a0dd74 QMacStyle: CC_SpinBox is now HITheme-free
Bonus changes in this edition:

    * The focus frame shows only around the spin-box's
      line-edit, as it should. This requires getting
      access to the spin-box's line-edit, which we do
      by setting a property on the former. Notice that
      the stepper doesn't get focus. On this point,
      macOS is inconsistent (partly because there's no
      such thing as an NSSpinBox, and partly because
      spin-box buttons are a separate control), so we
      copy the same focus behavior as NSDatePicker.

    * We clean some QFocusFrame related dead code in
      QMacStyle::event().

Change-Id: I204ca2093d9db343c78f0420811dda35c463bbcd
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
2018-02-05 19:43:49 +00:00
Tor Arne Vestbø
3d02e75c07 Unconditionally log to stderr, regardless of qt_logging_to_console()
Regression after 114f795221, which incorrectly assumed that checking
qt_logging_to_console() was a safe behavior change to include.

Unfortunately that broke debug output in Qt Creator, as Creator doesn't
seem to run applications with a controlling TTY unless it itself was
started with one, and doesn't set QT_LOGGING_TO_CONSOLE to force log
console output either.

Task-number: QTBUG-66153
Change-Id: I775cb06953122a3f20c16bfe21e19de2d1aa5b52
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2018-02-05 19:30:09 +00:00
Thiago Macieira
64a3bba7b8 QVariant: convert QDateTime and QTime to string with milliseconds
This way, it's lossless.

This commit is a cherry-pick of ab1e507574,
which was reverted.

[ChangeLog][QtCore][QVariant] Conversions of QDateTime to strings now
contain the millisecond components.

Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
2018-02-05 18:48:59 +00:00
J-P Nurmi
57f4521c99 Fix QXcbWindow::mapFrom/ToGlobal()
Call the base class implementations to avoid returning an unmapped
values for non-embedded windows.

Task-number: QTBUG-55251
Change-Id: Ib05fd530498dd4d72d3d4ef37caf4e2f0ebcd2e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
2018-02-05 18:21:21 +00:00
J-P Nurmi
756ebcd93a QGtk3Menu::showPopup(): fix off by one error in the y-coordinate
QRect::bottom() != QRect::y() + QRect::height()

Change-Id: I83ae19ab588fb9651354999679f5d3c9e294a97e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
2018-02-05 18:21:13 +00:00
Christian Ehrlicher
076087717e Documentation: Update CommonTableModel/StringListModel snippets
Update CommonTableModel/StringListModel snippets:
  - 0 -> nullptr
  - use 'override'
  - replace "" with QString()
  - use QStringLiteral instead QString
  - pass role to dataChanged() signal

Change-Id: I5949d1bd6fee3186f12191f1f6235ae18908096e
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
2018-02-05 17:06:43 +00:00
Tor Arne Vestbø
28cf5ae000 macOS: Share view update code between layered and non-layered mode
Change-Id: I8eaf0607c1ede18ed20180fd43cc93744c99962d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-02-05 16:27:59 +00:00
Tor Arne Vestbø
35f6f530bf iOS: Simplify logging of QUIView/QIOSWindow
Automatically printing the relationship between the view, platform
window, and window, makes it easier to track each object across
events.

Change-Id: I9fbfaa5c304849ed99dba3b5cd8e7449105d0307
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2018-02-05 16:27:57 +00:00
José Millán Soto
a0717c60b3 Handle coordinates related to component window
AtSpiAdaptor::componentInterface was not checking the coordinate type in
GetAccessibleAtPoint.

Now, if the coordinate type is ATSPI_COORD_TYPE_WINDOW the coordinates of the
window will be added to the specified coordinates.

Change-Id: Iba571109a8da300f4141d616a94ef4ac87918f98
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2018-02-05 16:13:01 +00:00
Sergio Martins
cf1b732e21 Introduce QT6_VIRTUAL and QT6_NOT_VIRTUAL macros
To avoid QT_VERSION_CHECK ifdefs

Change-Id: I364903964c72f4df19b8b7c10c19b82d24f63600
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
2018-02-05 15:54:34 +00:00
José Millán Soto
2e0849e79c Use placeholder text for accessible description of QLineEdit
If the accessible description of a QLineEdit is requested and none has been
set, the placeholder text will be provided if one is available.

Change-Id: I4c0dad1d06fd3d8a6e00c963402d380c59bd7f05
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2018-02-05 15:41:29 +00:00
Albert Astals Cid
10b9ff0a4d Remove QCupsPrintEnginePrivate::setupDefaultPrinter
it was declared but never used

Change-Id: Iededb2943759cd2d66de95bcc1758dbcc4283ee3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2018-02-05 13:53:33 +00:00
Albert Astals Cid
fadaf7053d Remove QPlatformPrinterSupport::createDefaultPrintDevice
no one uses it

Change-Id: I03d0350a44a19545d57b47d1b21d85f1a2059f4d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2018-02-05 13:53:24 +00:00
Tor Arne Vestbø
f4765ff5f6 Modernize logging in CoreFoundation and iOS event dispatchers
Instead of manually handling logging enablement, we use Qt's categorized
logging system.

Change-Id: I8d942601f76876030084c9fb130b7215ff6cc404
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-05 13:31:06 +00:00
Tor Arne Vestbø
b1fe198d87 Simplify how we set thread name for UNIX threads
Passing on the thread ID is confusing, as it's not really what the
function does. The QNX code path can resolve the thread ID by itself.

Change-Id: I5f0d54621058576cdcf3707d36a11762fe2383c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-05 13:30:53 +00:00
Johan Klokkhammer Helsing
3058e21af0 eglfs_kms_vsp2: Add support for setting layer alpha
Exposed through QEglFSFunctions::vsp2SetLayerAlpha.

Change-Id: I2a600971d5a2aa56d4bf7cde03df3323f17249cd
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
2018-02-05 13:12:01 +00:00
Andre Hartmann
6197df32ec QString: Add whitespace handling note to number conversion functions
Copied from QLocale::toFloat and companions.

Change-Id: Ic3a13a87cfc1ce34de9dd7d7e7b303ef103c384a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-02-05 08:55:13 +00:00
Andre Hartmann
9a74cbf473 QString: Wrap extra-long comment line
Change-Id: I77c95e99fd23eb914d7e86ee003d7f487c57f0f0
Reviewed-by: Martin Smith <martin.smith@qt.io>
2018-02-05 08:55:07 +00:00