They have not been tested with Qt 5, not even once to make sure
that the mkspec passes the sanity check.
This removes for OSes:
HP-UX (running on PA-RISC -- Itanium still supported)
SGI IRIX
SCO Unix
Tru64 Unix
Unixware
And compilers:
IBM xlC (Visual Age C++)
HP aCC compiler (PA-RISC and Itanium)
PGCC, cxx and kcc on Linux
There were a couple more OSes detected in the configure script that were
lacking even the mkspec. Those have also been removed.
Of those, only hpuxi-acc and aix-xlc have been tested in the last 9
years, though only with Qt 4 and never tried with C++11 support. IRIX
was last tested over 10 years ago and PA-RISC is definitely not
supported due to its lack of atomic operations.
Support for HP-UXi and AIX is now only possible with GCC (assuming GCC
supports those). Support files for Oracle's Sun Studio compiler are left
behind, but its state is unknown.
Change-Id: I7814054a102a407d876ffffd14b69c796b97c972
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The module might add QT_RESTRICTED_CAST_FROM_ASCII to DEFINES to
be able to use string literals under the assumption they are UTF8
without warnings from QT_ASCII_CAST_WARN, but this conflicts with
QT_NO_CAST_FROM_ASCII which is added for the headersclean build
step.
Change-Id: Ic1d7b5415350477d751a6c15219d4f8feb816a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change restores usability of Qt with older versions of CMake which
do not provide a language feature used in the implementation of the new
Qt5::<ModuleName>Private targets.
Task-number: QTBUG-60229
Change-Id: I6a6a1b09be3edca200692250bb8f0d7f6a1b8f7a
Reviewed-by: Stephen Kelly <steveire@gmail.com>
While a previous commit added the logic for handling arm from a qmake
perspective, the responsible mkspec was forgotten.
Change-Id: I5f36d411f2d2c22d8b048e0931da50d911e7e1b4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Creating a precompiled header exclusively for a one- or two-file module
is wasteful. The time that it takes to build the precompiled source is
on the same order as a regular compilation, so enabling precompiled
headers for those modules just makes the build slower.
Also make it possible to override the precompiled header by just setting
PRECOMPILED_HEADER to empty.
Change-Id: I0e1a09998253489388abfffd14b5f221288c4826
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Let's not allow any new code that uses non-conforming syntaxes. With
GCC and like, we already use -std=c++11 instead of -std=gnu++11 for that
very reason.
Change-Id: I4a7dc1fe14154695b968fffd14aba9f8cea69c47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The original commit only added support for GCC and Clang, but not ICC.
Amends 73331eeb
Change-Id: Id7638cf1b538edb1008fb3aa10754c1f517a994f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Otherwise, in separate_debug_info.prf, we try to process the original
target, which is not what we actually build.
Task-number: QTBUG-59779
Change-Id: I2b2d2e7b5f87041cc51075da7c3a5b690f94f1f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This warning is added in MSVC 2015 and is printed when we use noexcept
in modules we turned exceptions off.
Task-number: QTBUG-59645
Change-Id: Id92f4a61915b49ddaee6fffd14ae3b943ccd2bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][qmake] If you use CONFIG+=qmltestcase with no SOURCES, 'make check'
will now run qmltestrunner for you.
Change-Id: Ie9dfaef75494c9b38f6c9a6239754858535d8657
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Neither the Intel compiler nor Visual C++ have a dedicated switch to
enable F16C support, like GCC and Clang do. So we used the AVX switch
for that in commit 8241d51f70, as it was
the closest, lowest denominator. That was incorrect and insufficient.
The Intel compiler silently miscompiles the intrinsics with -xAVX,
making calls to out-of-line functions like _mm_cvtps_ph, which don't
exist. So we actually have to use AVX2 support to generate correct code.
That might be a problem later, since Ivy Bridge supports F16C but not
AVX2.
Visual C++ is able to generate F16C code with just -arch:AVX.
Either way, since there's no dedicated command-line switch, there's also
no dedicated preprocessor macro. We're using __AVX2__ for both
compilers, as that's a sufficient condition to indicate a processor that
supports F16C.
Change-Id: I27b55fdf514247549455fffd14b205b8d8b86da7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The .pro file requires the QMAKE_CFLAGS_F16C to be set to something. So
set it to AVX, as the instructions require the VEX prefix anyway (ICC
has no dedicated option for just F16C).
Change-Id: I27b55fdf514247549455fffd14b171940afd35a2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The configure-time detection (cxx11default) isn't enough if the compiler
can be changed. This is especially necessary if Qt is compiled with a
compiler that defaults to >= C++11 (e.g., GCC 6) and then the user
selects a compiler another compiler (e.g., Clang) via -spec option. In
that case, we'd miss adding the -std=c++11 or -std=gnu++11 option to the
command-line, causing the compilation to fail.
As a nice side-effect, even moc without moc_predefs.h will now get the
__cplusplus setting.
Task-number: QTBUG-58321
Change-Id: I74966ed02f674a7295f8fffd14a8be35da9640e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The font database uses UIKit symbols on all UIKit platforms and thus it
must be linked to. Also, limit the missing CoreText.h workaround so
that it is not applied for versions of Xcode where the bug is fixed.
Change-Id: Ia2a94baba6b0df618604a0bc3092fbd2a48d5aea
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The compiler is mostly GCC in disguise, but the libraries are not. Since
the toolchain is not open, it's difficult to fix issues in it.
Task-number: QTBUG-59671
Task-number: QTBUG-59672
Change-Id: Id92f4a61915b49ddaee6fffd14aea2639153f073
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the target of the injected forwarding header doesn't exist at qmake
time, as it is generated by an extra compiler, so the touch() calls in
qt_module_headers.prf would fail.
the error scenario described in ce942a226 is not applicable to
gui/vulkan, as no bootstrapped modules are involved. therefore, we can
just suppress the timestamping.
Change-Id: I1c9b6fcdf3717069fdbb654e3cb5d73b199192f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
the borrowing of headers always happens from "proper" modules which are
actually built as frameworks if so requested. that means that even
though the borrowing module itself never is a framework, it needs a
framework path and include paths that point into frameworks.
amends 20c7ab44.
Change-Id: Ic582060dd179cc592e9be7792ff02cebdfabd772
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Our headers ought to be clean in all compiler versions.
Change-Id: I4a7dc1fe14154695b968fffd14aba9ff9995c618
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add the option to omit code generated by wayland-scanner, to
avoid the case where the Qt versions replace driver-specific
functionality.
Task-number: QTBUG-58299
Change-Id: I508b18b9392dbd9e2b8233399301c06410f9f5ba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
For Android, Windows and xcb. Verified on Win10 with NVIDIA, Win10
with AMD, Android with Tegra K1, Android aarch64 with Tegra X1, and
Linux aarch64 with Tegra X1 (Jetson TX1, L4T).
Introduce QPA-based Vulkan library loader, core function resolver, and
instance creation support. In addition to creating a new VkInstance,
adopting an existing one from an external engine is supported as well.
The WSI specifics are hidden in the platform plugins. Vulkan-capable
windows use the new surface type VulkanSurface and are associated with
a QVulkanInstance.
On Windows VULKAN_SDK is picked up automatically so finding vulkan.h
needs no additional manual steps once the LunarG SDK is installed.
[ChangeLog][QtGui] Added support for rendering to QWindow via the Vulkan
graphics API.
Task-number: QTBUG-55981
Change-Id: I50fa92d313fa440e0cc73939c6d7510ca317fbc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It is ignored (and is unnecessary to begin with) in that case,
and emits an annoying warning which this patch silences.
Change-Id: I6059969724b203d6e0e2eea81ad3e3e8f8d536d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes an issue which caused certain iOS projects to fail to link
when building with Xcode, and also fixes an issue where projects were
only ever built with -fembed-bitcode instead of -fembed-bitcode-marker
for debug builds with the makefile generator.
Task-number: QTBUG-58754
Change-Id: Icf0c9f0d64dbc0b38d6c48bf635c5383a78bd6d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
otherwise, the invalid "--qpa xcb" would complain about "xcb" being
unknown, rather than "--qpa" missing an argument.
actual booleans are handled by the type-specific callback, just like
-foo would be.
Task-number: QTBUG-59062
Change-Id: I96632dacfb721cfcbf223b76f6c5c38c810e8d0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Sometimes, users need to add compiler flags to QMAKE_CXXFLAGS that
aren't supposed to be passed to the predefs dump. That's especially true
for -include options, as that would change completely what's
defined. Not to mention that -include is a preprocessor option and
shouldn't be in CXXFLAGS in the first place (Automake has CPPFLAGS, but
qmake only has INCLUDEPATH and DEFINES).
[ChangeLog][qmake] Added the ability to suppress the collection of the
compiler predefined macros for moc's use. To disable the collection, use
CONFIG += no_moc_predefs.
Task-number: QTBUG-58857
Change-Id: I4139d5f93dcb4b429ae9fffd14a34d49825d9b85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
these statements are assumed to provide dependencies for the currently
detected library. this implies that their resolved content must be
passed to the linker after the to be detected static library.
Change-Id: Ifaaee2ac71bf176e8a0033765fb979fe119deaba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this went unnoticed, because the only cross-module 'use' so far is that
of egl, for which the code path provided for modular builds happens to
(mostly) work due to the specs already providing the library definition.
amends cc842ca4.
Change-Id: I58c638d896eabd26f27d5cd90e3a7f8eeece9bc0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we derive the keys from the last fragment of the parent directory, which
is potentially not globally unique.
Change-Id: I57cf13394984e6e3d902c0f1bb495bd3920bfc75
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
if a library uses another library which happens to be absent, then the
former must also fail.
amends cc842ca4.
Change-Id: I91f157a6d1ed40b66e196340a282ebe493fcf40e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the outdated ones remain for backwards compatibility; some remain
unchanged.
Task-number: QTBUG-30083
Change-Id: Ia596b854d26b00fcb4f48df0da7ad893650ac1c8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
currently mostly for debugging purposes (especially with -verbose).
Change-Id: I8af32c61df0b19861aa79bc4bbdd3f6095dbe9b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
also actually deletes qfeatures.txt, which was already claimed by
a668c6a6, but not actually done.
Task-number: QTBUG-58411
Change-Id: I686760632fee7c10b01bd2e83f2481b01bc2b774
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
a header-only library in a default location would produce no variables
at all, making it appear undefined. fix this by forcing the writeout of
the QMAKE_LIBS_* variable, and use its definedness (rather than
non-emptiness) as a signifier.
this works for both QMAKE_USE and configure tests'/libraries' 'use'
entries.
Change-Id: Id7a1e23725caba1a91ea4db448b4aeb7fe632393
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
if multiple library entries provide the same export (as openssl is going
to), it makes sense to make them recognize the same input variables, as
it would be rather counterproductive to require different configure
arguments for each.
Change-Id: Ia32842e95294296d50220297f85689bc92de2d05
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
pass the library name instead of a library source object.
improves overall legibility at a marginal runtime cost.
Change-Id: I248ee9622af2b2c37daa2dbc0cc0bca5701d7925
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The AES instructions were first introduced with the Westmere shrink
(22nm) of the Nehalem architecture. The SHA instructions are still
pending on Intel architecture, but is available on AMD family 17h (gcc
argument -march=znver1).
Both features operate on SSE registers, so that's why the MSVC command-
line argument is the SSE2 one and the configure-time tests depend on
features.sse2.
The qmake feature names end in "ni" because "aes" and "sha" are too
simple and could clash with other uses. The QT_COMPILER_SUPPORTS_ macro
doesn't have the "NI" suffix because it has to match the GCC/Clang
predefined macro.
Change-Id: I445bb15619f6401494e8fffd149dbd1f862ff51c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
icc defaults to -O2, so this was causing debug code to be built like
that, making debugging very hard. This change also hardcodes -O2 for
release builds, just in case.
Change-Id: Ibc5c715fda334a75bd2efffd14a478ce539a3a3f
Reviewed-by: Robert Pancoast <RobertPancoast77@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They are the default with icc.
Change-Id: Ibc5c715fda334a75bd2efffd14a478c20b527d7c
Reviewed-by: Robert Pancoast <RobertPancoast77@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I6262b14640118482621c95c3988c068cf72271d8
Reviewed-by: Robert Pancoast <RobertPancoast77@gmail.com>
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
Use F16C or ARM FP16 if available at compile time.
Configure check added because older clang compilers have F16C defines
and flags but not all the intrinsics.
Change-Id: I71f358b8fd003e70ab8fcf35097414591e485112
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an old error of the gstrip binutils. The bug has been corrected
and re-introduced.
The command *elfdump -d xxx* on the ELF does bring lines like those :
.SUNW_syminfo: invalid sh_info: 0
Task-number: QTBUG-58814
Change-Id: I330c4031dcf4ba64297df4b333b41cf0a003914f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The value _XOPEN_SOURCE=600 should be used for C99 as we compile at
least with C++11. By doing so the compilation reaches another error in
a third library. Simply removing the option makes the compilation
working normally.
Task-number: QTBUG-56293
Change-Id: Ie040325936591958d05cc0a2d43643fa5d0c43b5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The path match OpenIndiana distribution based on Illumos.
Task-number: QTBUG-56293
Change-Id: I44e7defa63809dc4f413b46329481b53e5e74c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use of gcc-base.conf, g++-base.conf files and creation of solaris.conf.
The content of solaris.conf should follow the content of linux.conf.
Task-number: QTBUG-56293
Change-Id: I59cf9efa82ab0a2b22ea1a58f6339280460e5f92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there should be only one, at the level of the isolating .qmake.conf.
Change-Id: I25f05864d6f5c1bb5caf2fb4138adb4bb9cc2f22
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
don't fail to set up cross_compile early enough. otherwise, we'd
populate the cache for target builds with data for the host.
amends 6b8666c7 and 5060740f.
conversely, pass on extra flags to configure tests when not cross
building.
amends d8be8110 (and 2c5eb3e6).
Task-number: QTBUG-58556
Change-Id: I531d71e06204a0b17ae6dabf017a52e0f2efd9a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
these are not referenced anywhere, and neither should they, as they are
not relevant to _using_ these modules in any way.
notably, QT.*.bins remains exported - this is because dlls reside there,
so it is necessary for setting up a launch environment.
Change-Id: I7a33c72be6e4789ea29a2fbbcac9588213900b6e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the only users of module versions in the first place are found within
qt's own prfs; even qbs' qt module importer ignores them. but arguably,
the information makes sense.
however, exporting the same barely useful information redundantly is
plain over the top, so remove the pre-split representation.
Change-Id: Iaee69c86d8b7c8b8ef4f3580b8da333aeb8ade2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in a framework build, the headers are inside the "library", so it's
obviously not very wise to suppress its installation on the basis of
it not being there.
Task-number: QTBUG-57656
Change-Id: I026a3e486a2aad6ee0b8e0d264af4385af945e42
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Harald Fernengel <harryf@gmx.com>
Building qt with msvc would fail with the -developer-build configure
option turned on under simplified chinese locale.
This is because msvc will emit warnings for source files with utf-8
characters which are not representable in CP936, and -developer-build
implies treating warnings as errors.
This patch turn on -utf-8 compiler option for msvc2015 update 2
and up only for building qt.
Task-number: QTBUG-58161
Change-Id: If38ea11eb1f39f8e08efa1cccb92e0eea50daf92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Match the logic that is used for building.
Change-Id: I9ce6db2357b9b3e19a1e932fae57d376aae406f7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Nothing uses this and there's no incremental_off.prf since the MSVC6 purge
in 99f390f9 (dec 2009).
Change-Id: I2bc52f3c7a574209b213fffd149b4bf378805969
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
There's no reason to have that. Let the compiler decide whether it wants
to align or not. Current versions seem not to want to align beyond
multiple of 2.
Change-Id: Iab7c358838e1487387a2fffd149d73e0a218d3c2
Reviewed-by: Dominik Haumann <dhaumann@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The uvfd flag is implicitly defined when -Olink is used.
This causes the compiler to generate a warning for every
file being compiled in release mode.
Change-Id: I75759151864da7cf2f6d9c812e466a52c1208444
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This fixes a regression introduced in the merge 318b5856.
Due to the removal of actual simulator_and_device in 5.8 (397f345a6),
conditions using it have become meaningless.
Task-number: QTBUG-58440
Change-Id: I9f874f9f85efa590c40602dbcd07793ff17d35f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
This ensures at compile-time that Qt libraries do not use any APIs that
are not safe for use in application extensions, and fixes warning
messages that appear when linking to Qt libraries that are not built
with this flag, when used in an application extension.
This is especially important on watchOS where *all* "applications" are
actually application extensions, and on other Apple platforms if
application extensions are developed using Qt.
Task-number: QTBUG-40101
Change-Id: I022046f2584e0222253d33052b0abc221d7c93d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The patch fixes a number of bugs in code, and removes dead logic
clarifying that MIPS DSP, like ARM NEON, has no runtime detecton.
Change-Id: If2f4eea68da5b2eaa80b8e9c8258206d8c1b7173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The compiler command line used to populate QMAKE_DEFAULT_INCDIRS must
include the sysroot in order to generate the correct paths list.
This fixes a regression introduced in afd8263 which in turn attempted to
fix an earlier regression making it impossible to override the
deployment target in user project files.
Task-number: QTBUG-58325
Change-Id: I93e6b7ef90b2744dd2f03c77da31c692cb194976
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Enables optimizing with -Og if GCC has the option available, this
should produce faster debug binaries without compromising debugability.
Is a privateConfig to limit it to the default Qt build.
Includes two fixes for false positives of maybe_uninitialized triggered
by -Og on gcc 4.9.
Change-Id: I466d7a4070295714189024369312e6cbd36cfacf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It only applied to Windows (not MSVC, like the help said) and the build
was broken with this option. So remove it, as we clearly never test
this.
[ChangeLog][Windows] The -no-rtti configure option was removed, as Qt
5.8 fails to build under that condition. To disable RTTI on user code,
add to your .pro file: CONFIG += rtti_off.
Change-Id: I2bc52f3c7a574209b213fffd149aae1b8d0cf9df
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The problem isn't the compiler, but the linker, so we ought to turn this
flag on for all ELF-based systems where we compile Qt with -Bsymbolic,
but so far only the Intel compiler has been affected. We can turn it on
as needed for other systems.
The cause of the problem is the way that ICC materializes the pointer-
to-member-function: it stores the full 2*sizeof(void*) data in an
anonymous variable, so that it can load it in one go, such as one 16-
byte SSE aligned load on 64-bit systems. That relocation in a data
variable gets turned into a fixed-position copy relocation by the
linker, which breaks the signal-identification mechanism.
GCC and Clang are likely to be affected if anyone did:
static const auto destroyed = &QObject::destroyed;
QObject::connect(obj, destroyed, [](){});
Task-number: QTBUG-52439
Change-Id: I0d69eaf61af149db9574fffd149d0cfb08459c33
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This was used solely for building freetype. It was made obsolete as of
2eaf0cf8fd which upgraded freetype to a
newer version which does not rely on that define, first included in 5.5.
Change-Id: Iaaea8d6783032d784f0a370f8404972967fa7a06
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This implies that using tools like windeployqt and macdeployqt will not
generate a working standalone application.
Change-Id: I002cf6e527e479ccbee2f18df8766648196d6232
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Without this, building a project with qmake -Wall will
always produce the following warning:
mkspecs/features/resources.prf:22: Unescaped backslashes are deprecated
Change-Id: I0aeedbf470958ab458651a263e3f804ea2d1a0f0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
don't ignore detected features for host tools when we're not actually
cross-building.
Change-Id: Id62a3c1c6b7ae422b14efb4fbea0892b05a047cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com>
This was missed in dd9ec1564, leading to errors for example when building
with separate_debug_info.
Change-Id: Ibeb8020abe32690bcc691c1ca139508775c91db2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Renaming these specs should cause less trouble than usual since
most people are likely using the rasp-pi2 spec even for RPi3.
[ChangeLog][Platform Specific Changes][Linux] The Raspberry Pi 3
device specs have been renamed from linux-rpi3-* to linux-rasp-pi3-*
in order to follow the pattern of the RPi 1 and 2 specs.
Change-Id: I7d1ed6a4665078af9a4cbbe4c38b5fac760d03f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
there isn't a point to determining the values separately if they are
actually the same things.
Change-Id: I74cd2bf39e96d559630709559602c234c38b0c47
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
note that in principle this leaves room for a race condition, as the
first project to determine the host config is not going to be the
top-level one.
in qtbase and qtdeclarative, this is naturally serialized via the common
bootstrapped libraries (bootstrap resp. qmldevtools). activeqt, qt3d,
qtscxml, and qtwayland all build only one bootstrapped tool each.
qtwebengine makes a fake host build to create files for gyp/gn; the
convert_dict tool is declared a host tool, but isn't actually built when
x-building anyway, and even if, it's serialized on the former. qttools
needs explicit serialization, though. no other host builds exist within
qt as of now.
Task-number: QTBUG-58126
Change-Id: I81a02a2d98f2bfe5d6aaa51119d5e7919549f119
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in cross-builds, toolchain.prf was loaded before CROSS_COMPILE was set
up, leading to caching of possibly nonsensical values.
this change also necessitated that msvc-version.conf is loaded only when
toolchain.prf is, which is best done by loading the former from within
the latter. that seems quite appropriate in the first place.
Change-Id: I62577e827a75e335e03df016bd1aa1932643fd6c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
move the code before the linking of qt modules - dependency resolution
would re-order them anyway (or static linking would fail).
on the way, fix up the coding style and rename some variables.
the code to de-duplicate/normalize QTPLUGIN is pulled ahead, which means
that the automatic plugin importing wouldn't make a mess of it any more.
but this is mostly legacy anyway.
Change-Id: Id135470d027f5d84b7f30531425a65efa230f278
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that makes the log file mostly self-contained.
for code re-use, the qtSystemQuote() function was factored out.
Change-Id: Ie3469518ba384131b69f5f15c577240e2674d507
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the options may need to take effect before the regular test processing
commences (which is actually going to be the case in the next commit).
the indirection via the callback only obfuscated the code anyway.
Change-Id: I5307b0be15cf4cc2c2db391ce5b5a93f81076b5c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When an executable is being linked and uses a library that has been
built with exceptions enabled, the executable will need the exceptions
flag in order to link in the exceptions handling code.
Change-Id: I3acdb571afbbcaf860fb0ef0482f704f605a9bbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Check on QMAKE_TARGET_PRODUCT/QMAKE_TARGET_DESCRIPTION before assigning
values. This enables providing other values by for example the
Qt tool applications.
Change-Id: I62270ca38b7a9110185f6163b280409dbaf395f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Initial support for INTEGRITY to build QtBase
Change-Id: I18f36b4dea9107f01e1c281e4b62880590c777a1
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Risto Avila <risto.avila@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the second dash would end up in the option name, which made it obviously
unrecognizable.
but the second dash isn't optional in the first place (as evidenced one
line up), so remove the question marks.
Task-number: QTBUG-57908
Change-Id: I6622fef7d11d7b3c485f16698349d1912037a41e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
plugins may pull in additional qt modules which may require additional
plugins in turn.
Change-Id: I22264b39c1397666b2dc9079048ed1fc64aa84d9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while we already linked the plugins for our own private deps, we failed
to do so for our transitive deps.
this also fixes linking qml plugins if qml is linked only indirectly and
privately.
the code for setting up rpath-link is slightly refactored as a side
effect, with no functional change.
the code for setting up rpath now also sees the longer list of
dependencies, but that's irrelevant, as qtcore always ends up among the
direct deps anyway iff any non-bootstrapped modules are used.
Change-Id: I90dca81a2836c6191ce5d092e16bf7660ee820bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
static plugins must be actually linked into the target whenever it is
not a static library itself.
apart from fixing qml plugin linkage, this also provides a more generic
fix for the already fixed linking of activeqt controls.
Task-number: QTBUG-28215
Task-number: QTBUG-55279
Change-Id: I9661369bf3dfc6bcf3a5ed563e6716eb3ef6e76e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... instead of the directory it resides in, to make it independent of
the user's fs layout. this makes logs more comparable, and little else.
Change-Id: I0ab3e968dad74ef86577f388c8ca1557e3c17ce4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this was introduced in 60e5a1c8 for no apparent reason.
Change-Id: Idcbc6df3df4e4846c76b3e4215d753a1c97e2eec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
now qmake is the last command called by the unix configure script.
as it happens, this was already the case in the windows script, but only
because it didn't print these messages at all, which it implicitly does
now.
another effect of this is that repositories outside qtbase will now also
get the installation note in modular builds, which makes sense.
Change-Id: I567146936b216185a8e0f61e445222215608bf13
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The macOS and iOS version bumps were already proposed, and bumping
up tvOS and watchOS by one version since all original devices that
ran tvOS 9 and watchOS 1 can run the latest versions and given
the upgrade cycles and TP status of these platforms in 5.8, there
is not much point supporting any older version.
Change-Id: Ib01035054291f5bcd18d15a4f27ad33922076851
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
we don't want to do the (possibly interactive) license check when the
command line is not valid.
Task-number: QTBUG-18459
Change-Id: I68c3b7ed4646e49865922ab5612f971930698356
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
log a message in all unsuccessful exit paths.
Task-number: QTBUG-57217
Change-Id: I8b0f2685d327da583c3e42c8149327e05b2a66cc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
beyond this point, simulator_archs is only used to determine from which
one of the lists the remaining arch came from (and device_archs is
actually never used again). the lists are assumed to be mutually
exclusive, so truncating them won't affect in which of them the first
element of their concatenation is found.
Change-Id: I4736ed7e51f6623efa6bd37892ab1fcf8c83ae8b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
there appears to be no particular reason why this ended up in sdk.prf,
and it has become an actual problem now that the sdk is resolved from
default_pre.prf already, making it impossible for projects to override
the deployment target.
Task-number: QTBUG-56965
Change-Id: I8e319d10cdfb95acc1da1f431c8b8d4f76d1168e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
uikit already implies !host_build, as host builds are executed with the
host spec. and the only darwin alternative to uikit is macos.
Change-Id: I6b47d68bad5d4427640901ff1e32dacf9a4e352b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is mostly for appearances (as evidenced by everything working
despite it being missing from some specs), as the variable is just a
fallback for moc.prf's automatic detection.
Change-Id: Ie4af24c02ec03aaa1810281d1bb6876ea38cedf8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Disables escalating the implicit fallthough warning to an error, since
Qt is not yet free of unmarked implicit fallthroughs.
With this we can clean the code in the dev branch instead of in 5.6 and
5.8, and only backport bug fixes.
Change-Id: Id30ee21b77de6defcb7d5bb1e05e86c0db098481
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it depend on the corresponding Private target of each
dependency. This way, user code can write
find_package(Qt5Gui REQUIRED)
add_executable(hello hello.cpp)
target_link_libraries(hello Qt5::GuiPrivate)
and get the private include directories for both Qt5Core and Qt5Gui.
Don't create the Private target if any of the private include
directories do not exist. This way, if user code uses one of the
targets, CMake will issue an error if the private include directories do
not exist. Unfortunately the error is somewhat cryptic (eg, 'the
"Qt5::CorePrivate" was not found'), but this is still an improvement
over an error at compile time.
This is an improvement on the situation described in QTBUG-37417 using
Modern CMake features.
Change-Id: I034f8216c3ec64d1a3309682456a713cac9bf854
Reviewed-by: Kai Pastor <dg0yt@darc.de>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Since we can tell the MSVC version from the compiler now, each of the
qmake.conf files is now the same, so let's just have "win32-msvc" and be
future-proof. Likewise for win32-clang-msvc.
qplatformdefs.h was already common.
Since we can't obtain the MSVC version from the unified mkspec name any
more, I dropped the warning level during the qmake bootstrap to reduce
the number of warnings that need to be disabled from compiler version to
version.
There is no point in keeping the old mkspecs, but configure will re-map
the -platform argument to the unified spec as necessary, to keep
existing configure command lines working.
[ChangeLog][Visual Studio] Qt now has a common mkspec for all Visual
Studio versions, called "win32-msvc". The old names which contained the
version number are now gone (but qmake scopes based on the old names
continue to work). The version of the compiler can be obtained from the
MSC_VER and MSVC_VER variables (for example, for Visual Studio 2015,
those contain the values 1900 and 14.0, respectively). Those variables
are also available with the Intel compiler (win32-icc) and with Clang
(win32-clang-msvc).
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ib57b52598e2f452985e9fffd14587c0a77a5c09c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We're asking the compiler anyway, so we can fully use this information
just as well. Note that this actually happens after the spec itself has
been processed, so it was necessary to delay the version-specific flag
handling as well.
Change-Id: Ib57b52598e2f452985e9fffd14587b581d946022
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of hardcoding the compat version in the spec, run cl.exe (which
needs to be around anyway) to figure out what version to emulate.
Change-Id: I6eae97fe9a78f8e340ecdabcdc0d48738497c6d2
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
static builds of qt have been embedding their qml files via the qt
resource system since qt 5.7, so the code which attempted to deploy them
into mac bundles (introduced in qt 5.2) is useless nowadays.
Change-Id: I830cd2b660f7cab42a46ec8e002a42d9d299b528
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the code was broken since 5.0, as it still hardcoded the version number
4 for the plugin basenames.
wince is not supported any more, so there is no point in trying to
restore the code to function.
at a later point, we'll make QTPLUGIN universal enough to cover both
static and dynamic deployment.
Change-Id: I0911ce4aff7a799dd471d6218e046f13dca6d49e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Adds linux-generic-g++ which can be used for simple cross-building to
well-behaved Linux targets.
Change-Id: I20423249cbcaaf7fc2c65e46b737e682d9222e38
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QPA headers are shipped as private symbols, so they should be marked as such.
This helps distros to check which applications/libraries need recompiling
on each Qt patch update.
Task-number: QTBUG-57060
Change-Id: Ie09d4d10e1edb5127d45a05a3dfa3f4c9dd012f2
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
in its current form, it was introduced only in 5.7, mostly as a side
effect of -external-hostbindir (which is now handled differently).
it only ever worked for the macOS and MinGW specs, as a side effect of
them supporting -sdk and -device-option (for good reasons), and was
supported only by the unix configure. it's not believed to be really
useful and complicates matters somewhat, so get rid of it again.
should it ever become actually relevant, it can be re-introduced
properly, probably along with a -host-sdk option for macOS.
Change-Id: Ib078469ea39deb821c7b6a8c67fda9e1a95fedf5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of letting the specs validate themselves on each call, let them
only define a callback for use by the verifyspec configure test. this
is somewhat faster, and allows them to be loaded before qdevice.pri is
populated.
Change-Id: I2b60d006b33bbf42c28949f10ad429520ed32f46
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
its only consumer is qt_tool.prf, which is an internal api.
Change-Id: Iae90b079c5af60efad2ded70d6ea481212e5353a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... where it actually belongs, as it should work in each repo in a
modular build.
Change-Id: I5463f0bcacb239900bed0b0f7be9cf32a3eab04e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the qmake bootstrap uses some of the options, so the configures still
read config.opt for their own purposes, but the general handling is
entirely in the new system now.
Change-Id: I2c6c657d4da01c8d520ac74795454747bb224bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This re-fixes commit d72ac3f35f, which
simply removed the #define but did so at the wrong place. Instead of
forcing the macro to be removed, let's simply not have it defined in the
first place.
Change-Id: Ie6dbad9bbbd9488887e8fffd148dd67d9a31b32e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This warning does not make sense. it seems to trigger when in code like
the following in template functions:
auto x = 1, y = 2;
3373: nonstandard use of "auto" to both deduce the type from an
initializer and to announce a trailing return type
Other reports on the Internet indicate that no one understands what
triggers this warning and have just worked around it. Additionally, the
same warning exists on other compilers with the same text, so it's
likely come from the EDG front-end. This has been reported to Intel.
Change-Id: I73fa1e59a4844c43a109fffd148d45065ab69eff
Intel-Issue-ID: 6000164202
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][Platform Specific Changes][Linux] Added support for
cross-compilation for the MIPS CI20.
Task-number: QTBUG-57411
Change-Id: I5be2f53323b1d3c2323cd51064397590c143af1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Fixes: warning: implicit conversion from 'float' to 'double' to match
other operand of binary expression [-Wdouble-promotion]
Task-number: QTBUG-57068
Change-Id: I897a341aca83873bc6abd256a82a3b9f09409833
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In VS builds the default name is the first word of the command, in this
case "cl". Use the generated file name instead.
Change-Id: I8f0039eeae045f8b9a13caea8bd3e338bbe2ed17
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
excise knowledge of QTREPOS from qt.prf - this is a private variable of
the qt build system which the public functions should not know anything
about.
instead, move this handling to a function in qt_build_config.prf (where
QTREPOS comes from in the first place), and call it from qt_app.prf and
qt_example_installs.prf (which should be the only consumers within qt).
qt.prf now also checks that the qml install dir actually exists, which
is not the case during a modular prefix build of qtdeclarative.
not really incidentally, this fixes modular static builds of
qtdeclarative.
Task-number: QTBUG-57308
Change-Id: I31465b9cd400483264fc236934c6f9f26a5fdd73
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
we can't use $(QMAKE) after all, as this breaks with the visual studio
generator. so massage $$QMAKE_QMAKE into the final form manually
instead.
supersedes 591d9588f in amending 2b6bcd5ff.
Change-Id: I8c7a6c43f9668d88c1cc968dbf5614240f16239a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
gcc-base-unix.conf must be included before clang.conf because
clang.conf doesn't set all the needed flags.
Change-Id: I71f95732d0d245096b575c91610800d91c6aa5d7
Reviewed-by: Vyacheslav Koscheev <vok1980@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is a backport of 6cc02ce6c8 from 5.7.
In a parallel build we may end up copying the qmldir file at the same
time, which doesn't work on Windows due to file locking. Apply the same
guard for the copying condition as in commit
770a0c91f3.
Task-number: QTBUG-57153
Change-Id: Ibac759b16cebaf04f5d2f785211b62071aa656a8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the variable is converted to a format suitable for makefiles only after
the project was read. to access it, one needs to use the exported
makefile variable $(QMAKE).
amends 2b6bcd5ff.
Change-Id: I5eddff4bebbbcf461b565d5033d17a8daff1e6f4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This commit re-enables support for OpenVG in Qt, but not in the
same way as in Qt 4.8. The first part is about adding a test
and using the new configure system to enable OpenVG.
There is still support code in Qt for setting up EGL to provide a
surface and context for rendering with the OpenVG API, this commit
enables a path to do so.
Normally to get access to an EGLContext from a QWindow you do so via
QOpenGLContext, but in setups without OpenGL but with EGL and OpenVG
this doesn't make sense (there would be no QOpenGLContext). So the
intended way is to use a QWindow to get an EGLSurface, then create
an EGLContext directly (without going through QPA).
Change-Id: I0f75aadbaa3cd006deb7e6fd12cfbb574870fba4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
this is complementary to configure's makeSpec library source type.
this should be sufficient to make QMAKE_USE += {egl,opengl,opengl_es2}
actually work, obsoleting the need for opengl.prf and egl.prf (and the
currently dysfunct openvg.prf).
Change-Id: I2f7595ac89afa087ea7f0f25060e8e47e6148be9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Pretty useful when working on Qt itself or just having to deploy
a proper hand-crafted latest greatest to the Yocto-built image.
[ChangeLog][Platform Specific Changes] Added support for
cross-compilation targeting Renesas R-Car H2 (Lager) systems.
Change-Id: Ie359956046b0752a6053f85b81d32550b91ce453
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
now the callbacks don't need to re-export the designated file contents,
which improves the abstraction and removes some boilerplate.
Change-Id: Ifa50313155fc96762025e2610b810ebb71daa373
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
otherwise it's sometimes quite hard to tell it apart from configure's
own messages.
Change-Id: I2f4908344367a9a3ce38e032bf76486fc4552ffd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this got broken in 2ad4d75754.
however, the new configure system operates from the top-level build dir
anyway, so there is no point in messing with the cache as a reference
point to start with - just use OUT_PWD.
Task-number: QTBUG-57120
Change-Id: I69629bf497931574bff8452939170abb1776ab60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
'use' entries in the tests and libraries sections of configure.json
files should work acrosss library boundaries, so a test in
qtwayland can refer to a library from qtbase.
Change-Id: Ide02b9985be427a27982a422ca84a29b23145bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
You can now use 'module.gui' to check whether the Qt Gui module
exists in the current build of Qt.
Task-number: QTBUG-56656
Change-Id: Ic73f162ed0578e07c70e3ec3706f285b6d09a41d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Windows cd does not change the drive. So when you are on drive C:
and type "cd D:\data" it will change the directory on drive D: but not
affect your current working directory.
To also change your drive you have to provide the parameter /d on
Windows, so "cd /d D:\data" will also change the drive.
Task-number: QTBUG-57080
Change-Id: Ib629879534523982eec693cef725f20a535a1a74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This strips leading whitespace from asset catalog filenames, which was
causing installation to fail due to incorrectly calculated paths.
Task-number: QTBUG-57090
Change-Id: I80db627262f9d58f4403e2d8ab205bef2113992b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this actually affects only non-framework Darwin builds - debug-only
framework builds are impossible, and Windows is always debug-and-release.
Change-Id: Ia79dbbefc5750168ebd8967fe4afbe173f55a0d6
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
they were already omitted from the console output; there is no need to
spam the log with them (their completion was not logged, either).
Change-Id: I32c97413d2e6ceb18ee61356855cc6a7fa2222bf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
