The property 'model' is ported to a bindable property.
The properties hasSelection, selection, selectedIndexes,
and currentIndex are left for later patches.
Task-number: QTBUG-85520
Change-Id: Ia424ce99fc80c3d807c634c21d161a3ad94b27d2
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Those tests don't fail anymore and show in CI as BPASS, so we
can safely, hopefully, unblock them
Task-number: QTBUG-87429
Fixes: QTBUG-68974
Fixes: QTBUG-69166
Fixes: QTBUG-87403
Fixes: QTBUG-87411
Fixes: QTBUG-69083
Fixes: QTBUG-69084
Fixes: QTBUG-87426
Pick-to: 6.1
Change-Id: I831b955116c0f465319b9c5fc726dd98804d1c00
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since these tests do not actually use the filename in the loops, add
macros to declare them unused.
Change-Id: I3362e0478ac6802b37f54f90ca377aa462570d8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously, an apparent POSIX rule would be saved and any defects in
it would only be discovered when trying to use it to generate
transitions. Instead, check that it has the right form during the
initial parsing of its data.
In the process, since checking for DST in the process is trivial,
implement a long-standing TODO to cache hasDaylightTime()'s
answer. The array it scanned was in any case being scanned during
construction, so detecting DST in init()'s scan is trivial; and its
failure to check the POSIX rule mean it failed to notice when zones
entirely specified by a POSIX rule have DST.
Adapt a test using a POSIX-only rule to verify it does know the zone
has DST; it did not, before this change.
Change-Id: I690c013d3331600f7348dae61c35d41e5599da70
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The description necessarily has fake transitions at start and end of
the year, potentially outside the year. These transitions should not
be reported by QTzTimeZonePrivate as transitions, although its data()
must find a "transition" whose data it can use (as in the permanent
standard time case, which could potentially be represented the same
way, although there's a saner way to do so, that the code already
handles) to report the zone's properties.
In the process, fix (and make more straightforward) the convoluted
decision-making code that was deciding which transitions to include in
the returned list. It was assuming invalidMSecs() would be set as the
atMSecsSinceEpoch of a transition, although this is computed in a way
that makes that value most unlikely, even when the result is invalid.
It also rather confusingly mixed < 0 tests as tests for overflow with
the one < 0 test that's about ignoring DST before 1970. Also added
comments to clarify some of what's going on there.
Expanded a recently-added test of a permanent DST zone to verify this
now works correctly.
Change-Id: Ia8d98f433fb1e479dba5479220a62196c30f0244
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are two formats for such fields: one with a J prefix on a number
in the range 1 to 365, the other with no prefix and a range from 0 to
365. The code mistakenly treated the latter as if its range were from
1 to 366. The J-form doesn't count Feb 29th, so March always starts on
day 60; the code tried to take that into account, but adjusted in the
wrong direction (and this mislead me, in a recent partial fix, into a
fence-post error).
Add a test-case based on the Africa/Casablanca POSIX rule seen on RHEL
8.2, which tripped over the off-by-one error without a J prefix. This
incidentally also tests the J case.
Change-Id: I692ca511e5c960f91a6c21073d3b2f037f5e445f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It usually fails the test with "corrupted size vs. prev_size" message
coming from malloc() or some other memory allocation routine (which
signals about memory corruption probably)
Task-number: QTBUG-93176
Change-Id: I5e34971267c52c63cda2489bef5b09bed739f532
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 6d52d86b999088ec07e58c14197bddda043ef0aa)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The major part is stability tests for QList operations,
Also added std::shared_ptr to the Custom type. shared_ptr
accesses the memory which does not directly belong to
QList, so using it inside a passed-to-qlist type is
beneficial (e.g. ASan could catch extra issues)
Basic prepend-aware cases added to QString/QBA tests
Task-number: QTBUG-93019
Change-Id: I50e742bdf10ea9de2de66539a7dbb9abc4352f82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit adb41bbe00b2b853d4dd26cd9ee77ae5ed541576)
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Test the relocation logic through the QADP::relocate() method which
basically calls q_relocate_overlap_n inside and then ensures that
the data pointers are in good state
Running these locally in fact revealed a bug in the implementation,
so these tests are definitely good to have
Task-number: QTBUG-93019
Change-Id: I353ed46a31c5c77cd0c5fcacd3dfce46e5cf3e67
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 65d0f6829cc124f6d0d4003a17bedcb74dddf33b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Use the data moves to readjust the free space in the QList,
which ultimately fixes the out-of-memory issues caused by
cases like:
forever {
list.prepend(list.back());
list.removeLast();
}
Task-number: QTBUG-91801
Task-number: QTBUG-91360
Task-number: QTBUG-93019
Change-Id: Iacff69cbf36b8b5b176bb2663df635ec972c875c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit a0253f5f0249024580050e4ec22d50cb139ef8d9)
DEFAULT_IF needs to be true so that in a static build the
built plugin is automatically linked into the test executable
using the special static plugin per-repo behavior in
qt_internal_add_executable.
The QtPostProcess routines are not executed for this test project
because we don't use qt_build_repo. This means that no
QtFooPluginCMakeConfig.cmake file is generated and thus there's no
point in using qt6_import_plugins because the pulic plugin genexes
won't know about this target anyway.
Explicitly set the CLASS_NAME so that the name expected by the
Q_IMPORT_PLUGIN macro matches the name of the plugin instance that moc
generates in QT_MOC_EXPORT_PLUGIN.
Amends 22e967c304
Task-number: QTBUG-87580
Task-number: QTBUG-90341
Pick-to: 6.1 6.0
Change-Id: I5ef361e7e2cebc46b35310c679f15c84cd61b4a5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The six properties duration, updateInterval, currentTime,
direction, loopCount and easingCurve have been ported to the
new property system and are now bindable.
Drive-by renamed a local variable to avoid shadowing.
Task-number: QTBUG-85520
Change-Id: Ibabf106f5200d2dd4329a1e1f96112eccc29d6b1
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For items that are children of other items, removeRows calls
beginRemoveRows directly and then once again inside takeChild()
The signal blocker that dates back to the monolitic import from Nokia
prevents the model from emitting extra signals
but the persistent indexes are corrupted nonetheless.
Fixes: QTBUG-90030
Pick-to: 6.1 6.0 5.15
Change-Id: I5bc4b2598bf13247683b113faeec22471f1f04a4
Reviewed-by: David Faure <david.faure@kdab.com>
When inserting rows to a branch with no columns
the tester should not complain about indexes being invalid
Pick-to: 6.1 6.0 5.15
Change-Id: I466f4e5140b10f6dcf65a71f109c2d3be7336507
Reviewed-by: David Faure <david.faure@kdab.com>
The qt_ForceTlsSecurityLevel symbol is not defined if SSL is not configured,
so don't use it in the QNetworkReply test if it's not.
Change-Id: Id3110a1997fea1648b48bfc411e90e7efe306678
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Routine update with minor changes to locale data, no new languages,
territories or scripts. Various Spanish locales change m_grouping_top
from 1 to 2, reversing a change to a test of Costa Rica's currency
formatting made in commit bb6a73260e.
Includes updates to time-zone IDs.
Fixes: QTBUG-91478
Pick-to: 6.1 6.0 5.15
Change-Id: I78ee161275b3c456c5800a7317a96947c932cf8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt defines some integral datatypes (qsizetype, qintptr, quintptr,
qptrdiff) not in terms of the corresponding language datatypes (resp.
make_signed_t<size_t>, intptr_t, uintptr_t, ptrdiff_t) but as "integer
types with the same bit size of the corresponding language type" (and of
course the corret correct signedness for the target type).
This makes the Qt datatypes not printable via printf-like formatted
output, incl. qDebug, qWarning, QString::asprintf and so on; that's
because there isn't a format modifier that would universally work
with the Qt definitions.
For instance, on a 32 bit platform, ptrdiff_t may be a typedef for long,
while qptrdiff is a typedef for _int_ instead. Both long and int would
indeed be 32 bits, but they still are different types, and this means
that the ptrdiff_t-specific 't' length modifier would be wrong for
qptrdiff:
qptrdiff p;
printf("%td", p); // WARNING: -Wformat: wanted long, got int
Similarly, not using 't' breaks on 64 bits, and so on and so forth.
There isn't a way out, short of inserting casts on every print
statement.
So, let's adopt the same solution C/C++ use for their own integer
typedefs: the PRIx macros. This allows one to always use the correct
formatting specifier without the need of a cast.
I'm not adding the macros for the qintXX datatypes, as they already
exist in the Standard Library.
[ChangeLog][QtCore][QtGlobal] A series of PRIxQTDATATYPE macros have
been added. They make it possible to print some Qt type aliases
(qsizetype, qintptr, etc.) via a formatted output facility such as
printf() or qDebug() without raising formatting warnings and without
the need of a type cast.
Change-Id: I473226a661868aed9514d793c8e6e4d391ab5055
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use QBENCHMARK_ONCE rather than QBENCHMARK to avoid skewing the results:
when the QBENCHMARK block is repeated multiple times after the setup
code above runs once, only the first setFilterRegularExpression() call
unfilters some rows, while the subsequent calls simply check that there
is nothing to do.
The added benchmark is sensitive to the inefficiency - quadratic rather
than linear time complexity - fixed by
7d92ef63d7. The following two tables
contain the benchmark results on my GNU/Linux system. The numbers denote
milliseconds per iteration.
1. Qt 5.15.2 without the performance fix:
10K 25K 50K 100K 250K 500K
no match 0 1 2 5 14 28
all 0 0 0 1 3 7
first 0 1 2 5 14 28
1000th 2 6 12 25 68 302
middle 3 34 132 518 3300 13665
1000th from end 1 4 9 19 50 103
last 0 1 2 5 14 30
each 10'000th 0 39 211 937 6326 41050
each 100'000th 0 1 2 5 4226 34780
Without the fix the benchmark times out and aborts at 1000K and 2000K
data rows.
2. Qt 5.15.2 with the performance fix:
10K 25K 50K 100K 250K 500K 1000K 2000K
no match 0 1 2 4 12 26 56 136
all 0 0 0 1 3 7 14 28
first 0 1 2 4 12 26 56 136
1000th 0 1 2 4 13 28 62 145
middle 0 1 2 4 13 27 59 142
1000th from end 0 1 2 4 13 28 60 145
last 0 1 2 4 13 27 59 141
each 10'000th 0 1 2 6 22 69 290 1413
each 100'000th 0 1 2 4 13 30 81 261
Change-Id: I419a5521dd0be7676fbb09b34b4069d4a76423b1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Even if the user (usually accidentally) sets a thread count of zero or
negative. The reporter in the bug report did
QThread::idealThreadCount() - 1 on a 1 CPU system...
Drive-by add to the documentation and the missing #include.
Pick-to: 6.1 6.0
Fixes: QTBUG-93007
Change-Id: I6cdea00671e8479b9c50fffd167807d14e030154
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Don't call pre routine function in qAddPreRoutine if
the qt_call_pre_routines is not called
Pick-to: 6.1 6.0
Task-number: QTBUG-90341
Change-Id: I0ee70561dc57b857f8b3b1cf42c9dfe0cf45bd49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Define the template calls in the header to allow for better type
handling and checking with constexpr and avoid overuse of macros.
Depending on the type provided in the QJniObject's call, the
signatures and the correct JNI function variant is used.
If a type is not supported a static_assert throws a compiler error.
Pick-to: 6.1 6.1.0
Change-Id: I8a4d3ce85e1ff76ef385633f2a68511fffd12e55
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
When cross compiling from a case sensitive file system, casing
matters, and mingw headers and import libraries consistently
use lowercase.
This was uncovered by d385158d5213ef568b7629e2aa4a818016bbffac;
prior to that, the schannel TLS plugin didn't end up built (at
least when cross compiling).
Fix other similar cases that can be found by grepping the repo.
Change-Id: Ia696e17b7aaa979d7b7f5b0801383f338a8b585b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Those overloads have been documented as obsolete, but never been deprecated.
Add the deprecation macros to trigger warnings as of Qt 6.2.
The overloads taking a single StandardButton should not be deprecated until
Qt 7, as otherwise porting from old to new API will require an unnecessary
cast to StandardButtons for calls with only a single enum value.
The unit test explicitly tests the deprecated members, so disable warnings
there.
Fixes: QTBUG-92483
Change-Id: I283ddce4681eafda2378607f999946e56bbb777e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All TLS (and non-TLS) backends that QSsl classes rely
on are now in plugins/tls (as openssl, securetransport,
schannel and certonly plugins).
For now, I have to disable some tests that were using OpenSSL
calls - this to be refactored/re-thought. These include:
qsslsocket auto-test (test-case where we work with private keys),
qsslkey auto-test (similar to qsslsocket - test-case working with
keys using OpenSSL calls).
qasn1element moved to plugins too, so its auto-test have to
be re-thought.
Since now we can have more than one working TLS-backend on a given
platform, the presence of OpenSSL also means I force this backend
as active before running tests, to make sure features implemented
only in OpenSSL-backend are tested.
OCSP auto test is disabled for now, since it heavily relies on
OpenSSL symbols (to be refactored).
[ChangeLog][QtNetwork][QSslSocket] QSslSocket by default prefers 'openssl' backend
if it is available.
[ChangeLog][QtNetwork][QSslSocket] TLS-backends are not mutually exclusive anymore,
depending on a platform, more than one TLS backend can be built. E.g., configuring
Qt with -openssl does not prevent SecureTransport or Schannel plugin from being
built.
Fixes: QTBUG-91928
Change-Id: I4c05e32f10179066bee3a518bdfdd6c4b15320c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the signal takes a value, we pass the current value of the property
to it.
As we now use eager evaluation, accessing the current value is now
possible.
Change-Id: I5e6947a6575bfa8ca5143f56620c645d4750a686
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This mirrors the functionality of QObjectCompatProperty::notify, and can
be useful to delay notifications until a class invariant has been
restored.
Change-Id: I1c16a0b1537a1b53d144c8abe48e546553edf877
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch fixes the breaking of case sensitivity handling. The removal
of QRegExp killed the wrong code paths which leads to inconsistencies
when changing the regular expression throuh methods like
setFilterWildCard or setFilterFixedString. Changing the case sensitivity
also nukes the original options that were set on the regular expression
if it was set through setFilterRegularExpression.
[ChangeLog][QtCore][QSortFilterProxyModel] Case sensitivity as well as
regular expression options handling have been fixed. The original value
is properly kept when using setFilterWildCard and setFilterFixedString.
The regular expression options are now also properly kept when changing
the case senstitivity through setFilterCaseSensitivity.
Fixes: QTBUG-92260
Pick-to: 6.1
Pick-to: 6.0
Change-Id: Ifb4732306f0c7d79ad0b18d3f5437c4523bb40e5
Reviewed-by: Igor Kushnir <igorkuo@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
contentsMargins is a Q_PROPERTY on a QLayout. Qt 6.1 introduced
QLayout::unsetContentsMargins() to reset the contents margins to the
"default" ones (that the user can't know); that's the textbook
description of a RESET function for the property.
Add some tests also for unsetContentsMargins.
[ChangeLog][QtWidgets][QLayout] The unsetContentsMargins() function now
acts as the RESET function for the contentsMargins property.
Change-Id: I463d88363c11f4a15ad3d6af71401d8698de1d41
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extended QObjectPrivate::ExtraData to store a pointer
to its parent, and reimplemented qGetBindingStorage()
function for QObjectPrivate::ExtraData.
This allows to use Q_OBJECT_COMPAT_PROPERTY macro
for a property, stored in QObjectPrivate::ExtraData
and solves all the problems with calling a custom
setter.
Task-number: QTBUG-85520
Change-Id: I40e01c29430846359ef9160fa1ae97c702be9a18
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Removed 5.15 specific QVector code, which is unlikely usable now when
we are at 6.1+ timeline (that was really only a nice-to-have during
5.15 -> 6.0 transition)
Added "remove first" benchmark to track the fast (or not so fast)
removal path
Updated mid insertion and mid emplace to actually trigger both paths
(growing at the beginning and at the end), before it was really using
just one side, which is not quite the "mid" way it feels. Also changed
mid insertion to actually use the insert algorithm. Seems like
insert(i, t) calls emplace under the hood at least from the visual
introspection
Change-Id: I01b82cfa0ae38d481ea7362947f3607d757bf5d0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add rounding one place, and skip addFile for now since
the assumption about rounding dpr up no longer applies.
Pick-to: 6.1
Change-Id: I0a84dfabb218acf42cb3816ba50ef899c8762523
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A POSIX rule's transition time is allowed an hour in the range from
-137 to 137; in particular, a negative hour is allowed, and used by
some Greenland zones using Europe's time-of-transition which, as they
are more than two hours west of Greenwich, happens before midnight.
This means the time of transition can't be represented by a QTime(),
so propagate the int that represents it to the code that consumes it;
and treat parsing failure as an error rather than "correcting" it - if
the transition time is given, it must be valid.
Changed tst_QTimeZone::isTimeZoneIdAvailable()'s verification of
validity to report the name of the zone it thought was invalid.
(A later change, validating POSIX rules, caued this to fail for
America/Nuuk without the present fix.)
Change-Id: I5c9127ac34d878554dd0aca1c1c7338c7e0e1c28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the ID isn't even valid, don't waste cycles trying to make sense of
it as identifying a time-zone.
Add test of an invalid ID that provoked an integer overflow on trying
to parse it as a POSIX zone specification.
Fixes: QTBUG-92842
Change-Id: Ib80bbb88c11c0484ce0358acabbdc25c5bd8e0b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test use aggregate initialization on some classes which however
are no longer aggregates in C++20 (the rules changed again; in C++20
having a user-*declared* constructor makes a class not an aggregate).
Just add a constructor so the code keeps compiling in both 17 and 20.
Fixes: QTBUG-92963
Pick-to: 6.0 6.1
Change-Id: I52371c5ee34c84358987b5ae8bee9ab9c49c8eab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before this change, QXmlStreamReader prefix value was always an empty
string for EndElement when the documentation state : "Returns the prefix
of a StartElement or EndElement."
The error was a missing update of the prefix value when parsing
EndElement.
I updated the tests data which were also wrong because no prefix were
reported even for </a:foo>. No new test is necessary, I think, the test
data already cover the cases of EndElement with a prefix and without one
(unchanged here).
Fixes: QTBUG-86847
Pick-to: 5.15 6.0 6.1
Change-Id: I0ad38b9741d760f1ce688a36f969ec14e20a928c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When rows are removed from a model with no columns,
the test should not report a problem if indexes are invalid
Fixes: QTBUG-92886
Pick-to: 6.1 6.0 5.15
Change-Id: I7a042dfdb2575f87208a00cbed13db3869807f84
Reviewed-by: David Faure <david.faure@kdab.com>
The testcase relied on having optional packages, and that the last
package in that list was found. Otherwise the version numbers of
the found modules were not set.
Change-Id: I76743fd029d6eed2f4b347280591e6fdaed19053
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
ScreenGadget visualizes virtual desktop screen layout,
in device independent and native pixels.
This can be used to debug the (sometimes surprising)
device independent screen geometry resulting from Qt
applying a scale factor.
Change-Id: I5b18e0fc9a54ba3e14d648794429b2eeadd25748
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Display active environment variables. Reorder the
labels with device independent values to the left
and native values to the right. Display the Qt scale
factor.
Change-Id: If95c252b06eff5abd91a25847777246effe94be2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There is only one property in QSequentialAnimationGroup,
currentAnimation.
This patch ports this property to the new property system
Task-number: QTBUG-85520
Change-Id: Id528d30f551e88a6165bbb6a3c09d44e89257de5
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Port watchMode in QDBusServiceWatcher to the new property
system. This is the easiest part.
Task-number: QTBUG-85520
Change-Id: I588212af205e77765862b8fecdbdcbf871717142
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Setting a cancel button on QProgressDialog more than once caused the layout
to be invalid. The layout was only applied when the dialog resizes or the
style changes, but not when a new cancel button is set.
The solution is to update the layout() before showing the dialog when adopting
new child widgets.
Fixes: QTBUG-19983
Pick-to: 6.0 6.1
Change-Id: Id8fb1ac56e94a9bd97d4559a2e8d4835856fd7d0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QList tests have mostly a scheme of:
void opInt() { op<int>(); }
void opMovable() { op<Movable>(); }
void opCustom() { op<Custom>(); }
As a drive by, move the leak checking into a separate struct/macro
Change-Id: I7cdda3a6c2aa324968aa26594da9f9eafbd49a0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
