using the Makefile target separator to determine the host system is of
course not a terribly good idea. the correct variable to query would be
DIR_SEPARATOR, which always reflects the host. however, a direct os
query is less obscure in this case.
Task-number: QTBUG-54346
Change-Id: I6bc1372a7c9a84a241a97f9f767f046b026411c3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
don't add framework directories (including the respective marker!).
this is consistent with the unix configure code.
Change-Id: I2e187057bc3fe2b35128cd5dc2af57b9f3685d83
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This fixes a long-standing issue for Qt packages, where the
paths detected at configure time do not necessarily match the
paths on the user's machine. Hence they have been stripped
manually from qconfig.pri so far, preventing moc from resolving
some includes.
The same logic in configure is left alone for the time being,
since the paths there are also used to filter paths returned
by pg_config and mysql_config. I expect that this will
eventually be removed too in a bigger refactoring going on
right now in dev.
Asking the compiler for implicit paths only works for non-msvc
builds - that is, gcc, clang and icc fortunately have a
compatible way to retrieve the paths. MSVC works
solely on environment variables, which will be taken into
account by a separate patch.
[ChangeLog][qmake] The implicit compiler directories that
moc needs for resolving include files are now determined
when qmake runs. So far QMAKE_DEFAULT_INCDIR was determined
at configure time, which might be wrong for relocated
installations.
Task-number: QTBUG-52687
Change-Id: If0706e8c56a5aca2b6e777e79e90342c498726f3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This test was the old way of checking whether to enable
c++11 functionality. That is now anyway required, so there
is no need for this test anymore.
Change-Id: I083e85a4698cac6bd9b573525c7b977f63e14113
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][Important Behavior Changes] qmake now enables C++11 support
by default if the compiler is known to support it (unless the compiler
defaults to C++14 or a later edition). To disable this, add to your .pro
file: CONFIG -= c++11. Note that Qt 5.7 will require C++11 support, so
it is a good idea to ensure your code works with that compiler
setting. (Note: it is not possible to disable C++11 support with
Microsoft Visual Studio)
Change-Id: Ib056b47dde3341ef9a52ffff13ef13ee2cf888eb
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Check for a valid license not only in configure, but also in qmake.
To limit the runtime overhead we cache the day of the last run in
a .stash file. This allows us to run licheck only for the top-level
qmake call, and only once per day.
This requires an updated licheck executable that supports the new
check mode.
[ChangeLog][Tools][qmake] For commercial builds, qmake now checks for
a valid Qt license. This requires setting up a Qt Account (or
.qt-license file) on the development machine.
Change-Id: I2c2a05a4602cc661560568b76ddf520cb8134769
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since all gui applications already need some QPA plugin added,
we might as well add the default plugin and generate the code
to import the plugins automatically.
User can opt out from the automation by removing relevant
items from CONFIG variable: link_qpa_plugin or import_plugins.
Task-number: QTBUG-28131
Change-Id: Ic171c363464c099143374d3e39bcc28f6edf73d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the feature was backported to qt 4.8, and people apparently started to
rely on it. it doesn't add too much overhead when not used, so enable it
by default again.
Change-Id: I15890027603ede733347f2c05b36ad1389c649cf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is qt module specific magic that has no business in the generic
default_pre.prf.
a side effect is that every qt module now needs to have a .qmake.conf
(unless it sets MODULE_QMAKE_OUTDIR, like webkit does).
Change-Id: Id9e5f6eee2d8ec0c711e7217d9e1893fc9c88132
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
for one, the syncqt invocation is qt module magic and thus simply does
not belong into the generic default_pre file.
second, this way the forwarding header generation is now linked to the
rest of the build magic for a particular module, which is way less
confusing for the unsuspecting developer.
Change-Id: Idc8e420d3faf173d7fff4a41e6e1c59af15c3023
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
all other build artifacts go into qtbase's build directory anyway. this
asymmetry was confusing and causes cmake users some grief.
Change-Id: I4d7f7b2318f6c5300eb00360664785cb2c8217b7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that all modules have migrated, this dead code can be removed.
Change-Id: I5e9c7dd3fb271346d1b5f0e2930874da3e4d2d57
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
now that all modules have migrated, dispose of the clutter.
Change-Id: Ib8937c1452536f645b76c0097b927df1108afc1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way qmake is made aware of the forwarding pris which are generated
for this module even when a top-level .qmake.cache prevents the module's
root from being found automatically.
the path is also added to the cache, so that subsequent partial
qmake-ing of the tree will still find the module.
this also makes the -cache-module-fwd parameter of syncqt useless, so
remove it.
Change-Id: I2afbc52a465c0b3260e9bcaf032c43a82ae8061f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed by webkit's creative directory layout.
Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.
this variable is used by webkit, which has a somewhat creative directory
layout.
Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qtbase install dir being a build dir is a necessary and sufficient
condition for detecting a developer build.
Change-Id: I3d98c789ac6fbe570980459edabb9a941bf1e5d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.
Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Normally you want to pass -installdir $$[QT_INSTALL_DOCS] to qdoc by
default. However, if you want to force the generation of URL links to
the documentation, the option cannot be specified.
By setting the QMAKE_DOCS_INSTALLDIR variable in default_pre.prf a
project may override it at will, as for example Qt Creator would do.
Change-Id: Ib31f03acf4e8050cf2dd3aa33f3a10ed027f1df7
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
syncqt may generate that file also as a result of configure tests. so
just check for the file's existence instead of trying to reproduce under
which circumstances it should appear.
Change-Id: Ia24f96b05fc70e104f7be19d08cea614ffb505be
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
otherwise we are breaking the "less hacky" configurations. whoops.
Change-Id: Ibb037753fbaf30beae3d30173be77d48b978b60b
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
moving the detection of .qmake.cache to the qmake startup had the side
effect that a suddenly popping up cache would not be picked up by
nested projects any more.
this is not supposed to work in the first place, but the syncqt hack for
building against non-installed modules relies on it. until we have
cleaned that up properly, we need a way to notify qmake about the
appearance of the cache file.
Change-Id: I450646b936e3bb2ef2ed3aba05df58e521ccdc61
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This feature is only available to advanced qmake clients who have their
own defaults_pre.prf, where QMAKE_SYNCQT_OUTDIR is set before loading
Qt's own default_pre.
This is useful to be able to put the sync.profile file in a different
level in the source tree than where you want the output in the build
tree.
An alternate/complimenting solution would be to allow the output path
to be overriden from within the sync.profile file.
Change-Id: I3cdef82dbe492877507e269e18571456beeb2b7d
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
An extra script is added (qtmodule-configtests) which is currently
invoked from syncqt (with some derived parameters passed to it).
The module can optionally have an entry in the module's sync.profile
file in the form of a perl map of "test name" => parameters. Tests
can print an advisory message if they fail (e.g. "Install this
SDK/dev package"), or abort the syncqt process (e.g. mandatory
prereq missing). Also, if the test has a "requires(foo)" line
that results in it being skipped, this is also supported.
Change-Id: Ic3c820a488a0992c944994d4d7dc283da36742d6
Reviewed-on: http://codereview.qt.nokia.com/928
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
In debug_and_release builds, we have three passes, the glue
pass, and a pass for each build type. We only need to run
syncqt when we are in a glue pass, which is when
'build_pass' is not set. In non-debug_and_release builds,
build_pass is never set, so this condition works for all
build types, with multiple configurations or not.
Change-Id: I191da0df3ad422bb5fb8994391c2b2d2e23efc32
Reviewed-on: http://codereview.qt.nokia.com/1717
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When the build directory is the install directory, separate modules
should use qtbase as the path for libs, module pris etc.
This fixes the logic in default_pre.prf so that syncqt is called
correctly in these cases.
Change-Id: Ib3798bfd145d3a3e43b9a222af46270245e6c2e6
Reviewed-on: http://codereview.qt.nokia.com/464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Eckhart Koppen <eckhart.koppen@nokia.com>
It can be hidden with -silent, however.
Change-Id: I6dbd3c743779b8d2070e41f007df26b530987429
Reviewed-on: http://codereview.qt.nokia.com/235
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
We use syncqt to generate .qmake.cache also for submodules, which
contains the location of forwarding module profiles for that module.
This enables us to build without having to put module profiles into
mkspecs/modules until install time.
Also added support for -developer-build to syncqt.
What it does is to point build directories for binaries and
libraries to a common location in QtBase. This is more
convenient when doing development, since you don't need to set your
path to every module's bin/ directory, but it cannot be used with
release builds, since they need to build independently of QtBase,
in their own directory.
Change-Id: I959c62c11c644f2147a98da894a72452d9c44327
Task: QTBUG-19585
Task: QTBUG-19583
Reviewed-on: http://codereview.qt.nokia.com/232
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
If the user has set QTDIR to something other than the location of the
qtbase build directory, syncqt will fail.
This change prevents the build from continuing. Ideally, the system
should ignore the user-set QTDIR value or give an appropriate error.
Reviewed-by: Rohan McGovern
This will normally only happen for top-level pro files,
and syncqt is smart enough to not touch already existing
files. And in edition, syncqt uses the original file's
timestamp on the fwding files.
