QIODevice represents considreable overhead, even with just QBuffer, for
parsing simple things. Benchmarking showed it was spending 25% of the
parsing time inside one QIODevice function or another. So this commit
accomplishes two things:
1) it increases the buffer size from 9 bytes to up to 256, which should
reduce the number of calls into the QIODevice
2) if the source data is a QByteArray, then use it directly and bypass
the QIODevice, thus increasing performance considerably
Change-Id: I56b444f9d6274221a3b7fffd150c531c9d28e54b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There's no clear reason for these functions to be inline;
this prepares a tracepoint hook.
Change-Id: I3a6110a9333db4850c1d97038d5bfae8ab25d5d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adjust line positions to deal with negative leading which isn't included
in height of QTextLine.
Change-Id: Id7918968c0f9d7e65700b9e7a08fc5d761883f22
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The PDF backend was ignoring the cosmetic attribute for certain pens,
resulting in strokes rendered incorrectly.
Task-number: QTBUG-68537
Change-Id: Ib9fd5a510716056c8afe67733f51fc682bbb7354
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Link to the data ownership section of the QML documentation to elaborate
on the special rules that apply for invokable functions that return
QObjects.
Change-Id: I41ea9089468c9505807cf1fde22be759b397a6d3
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As the full range of TIME is '-838:59:59' to '838:59:59' then we cannot
use QTime as the object to store this data in. Therefore a QString is
used instead for passing the data to and from. This does not impact
existing code using QTime already as it will still convert it from
the QString to a QTime to give the same result as before.
[ChangeLog][QtSql][MySQL] The TIME data type is now treated like a
string-based type in order to respect the full range of the TIME data
type.
Task-number: QTBUG-57028
Change-Id: Ieb7105bff3043b845f76bc873d088e6bac1e4f10
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test doesn't make much sense on platforms that don't support window
activation.
Task-number: QTBUG-66849
Change-Id: I875314d026d666173ec345d0864ad41d66179783
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test is actually passing, so just enable it.
Task-number: QTBUG-66849
Change-Id: Ie1566b9e5e19f5ab6d919624aa14662a1d4483ec
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Link to a bug report so we can track the failures and figure out how to fix
it in Qt Wayland or if we should skip the tests in a proper way. I.e. with
platform capabilities or similar.
Task-number: QTBUG-66849
Change-Id: I7a16333c7d2284eb9da6efd4515891438e9976b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This dynamic property can be used to specify an explicit QNX window
type for a QNX platform window. The _q_platform_ prefix makes it
possible to place the property on QWidget objects instead. Existing
functionality ensures that any QWidget property whose name begins with
_q_platform_ is copied to the underlying QWindow object prior to
creation of the platform window.
Add _q_platform_ aliases for the dynamic qnxInitialWindowGroup and
qnxWindowId properties so that these properties can be also be
specified on QWidget objects.
Change-Id: Ia37a965dd25de333307b2bb5ae81446db271af1f
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Dan Cape <dcape@qnx.com>
No need to start with 'connectToHost' from 'connectToHostEncrytped'
- we will fail to start client encryption later anyway. This can happen
if we, for example, fail to resolve some symbols or libraries are missing.
Task-number: QTBUG-65142
Change-Id: I0614d5cdf875aaf5b992d8ab6024bcaf3f84b915
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
inLoop is only set, never read and it is private. Since the class is public, it
can't be removed yet, but add a comment so that it will be removed when
possible.
Change-Id: I5e212194cb65626fce2b4c7b68801a73dbe3f500
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Unlike QNAM, our toy http2 server sends payload as one big chunk as soon as
it fits in the receive window's size. Internally, 'frame writer' splits this
payload into many DATA frames of the appropriate size (imposed either by the
default value or the one from the client's SETTINGS frame). If some test fails,
we can end up with a server waiting for the writer to send all the DATA frames
though it is not needed anymore - there is nobody to receive them after a failure.
This patch moves such a loop into the test server instead and stops the loop early
if needed.
Change-Id: Iea2dcd718d8f83386fd16004807f6447bf999435
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently when doing comparison with std::tuple the fallback toString
method is called which returns a Q_NULLPTR thus not allowing proper
diagnostic of the values that triggered an error. This patch
adds support for std::tuple to improve the tests output readability.
[ChangeLog][QtTest][QCOMPARE] Now outputs contents of std::tuple on
failure.
Change-Id: I046a55e2ce44c3f7728d51e4745120d38aa5e007
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of sending one @-separated message, send one CBOR message. The
message structure is, using the CBOR Data Definition Language:
broadcast = [
username: tstr,
port: 0..65535
]
Change-Id: Ic38ec929fc3f4bb795dafffd150ac2614d18c6bf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This complements the previous commit, which changed the broadcast
datagram to CBOR. This commit changes the TCP protocol too. The protocol
is an infinite array of commands, each of which is a map from an integer
(the DataType enum) to either a string or null.
The entire state machine for the connection is rewritten, relying on
QCborStreamReader's ability to deal with incomplete data.
Change-Id: Ic38ec929fc3f4bb795dafffd150ac674c32fac87
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtWidgets][QLineEdit] Added inputRejected() signal for when
a key press is not accepted by the QLineEdit. For instance, when an
invalid key is pressed for a validator set.
Task-number: QTBUG-57448
Change-Id: I39182a78b07b37c6da01905b8da4c57930e3454b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
qdoc didn't handle this. This update fixes most of what was wrong,
but tuning the details of the namespace reference pages might follw.
We have namespace Qt as an exaqmple. Most of the elements in the Qt
namespace are in QtCore, but a few functions are declared in QtGui.
Before this update, qdoc used the hack of using #ifdef to remove the
declarations from qtextdocument.h in QtGui and .cpp and then added
them back into qtnamespace.h and .cpp in QtCore.
Now that hack is no longer necessary. The functions in the Qt namespace
that are declared in QtGui are documented there, but the documentation
is linked to from the namespace reference page, which remains in QtCore.
That is, only one \namespace command is used to document the Qt namespace,
and it appears in qnamespace.qdoc where it always did, but the documentation
for the Qt namespace functions declared in QtGui is now appears in
qtextdocument.cpp where it belongs.
Change-Id: Ic5888875c3b8310a3dba244475e2a6c3bc0c1808
Task-number: QTBUG-67267
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
qwaitcondition_unix.cpp:209:14: error: comparison of constant 9223372036854775807 with expression of type 'unsigned long' is always false
Task-number: QTBUG-68568
Change-Id: Icc2c231dc2c44abdb087fffd1533c70ae68060dd
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A mismatch of enums after a rename.
Change-Id: Ib28e4607f20583afcb9210fdef7f52d95c63e3dd
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Nothing in this test references date-times.
Change-Id: I4005cda550d54abe46370963b1e91fab9829298d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The prior #if-ery was needlessly confusing; and most of it was
redundant anyway.
Change-Id: I82da1b38c08b93b9dc2220dd7b15ecb7dcc002af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Similar to Qt::GlobalColor, the presets allow the user to create
brushes based on predefined gradients, quickly getting pretty pixels
on screen.
The presets are based on the linear gradients from WebGradients, a
free collection of gradients, hosted at https://webgradients.com/.
The few radial and blended gradient presets have been excluded.
Change-Id: I1ce8f2210a6045c9edb8829ab3eddcc313549127
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QWindows are still backed by NSViews, but these views render to a
CoreAnimation layer instead of directly to the top level NSWindow.
This is the direction Apple is going (and is the only available
option on iOS/tvOS), so we want to move away from the existing
code path as soon as possible.
The default can be reversed by setting QT_MAC_WANTS_LAYER=0, or the
_q_mac_wantsLayer property on QWindow.
[ChangeLog][macOS] Layer-backed mode is now the default for QWindow.
Change-Id: Ibb9cc7541b179cad215d0daee14aeb1b54be614c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Avoids an unused function warning.
Change-Id: Id221595920e9a34eb83b66fe123d664f60fcae05
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It became obsolete when we switched to LGPL3, as discussed on the
developer mailing list in April 2017.
Change-Id: I8445a0e6febba8b31a95fbc140343c2013776b48
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Check whether the mouse is inside the window and report
MouseButtonRelease or QEvent::NonClientAreaMouseButtonRelease,
respectively. The inside case is triggered by programmatically
starting a size move via QPlatformWindow::startSystemResize()
(QSizeGrip) and was overlooked in
7c3ecf85a7.
Complements 4589440891,
7c3ecf85a7.
Change-Id: I8f714dc768a163878c2b4a075470bcee2dfbd802
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
This rewrites _readString_helper() in terms of _readByteArray_helper()
(the helper version doesn't do type-checking) and rewrites
_readByteArray_helper() in terms of readStringChunk().
Change-Id: Iab119b62106d40fb8499fffd1510aa404d9f3611
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: I840426ebf35b0fec64e92386fc3e1cabd91ced25
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a QComboBox is used as the editor for a relation inside a view then
it could end up showing the contents of the EditRole. This would be the
field which is used to represent the entry as opposed to the DisplayRole
which is what the user would expect to see is.
Therefore, setEditorData() is overridden to ensure that it is showing
the right data to the user. When the model gets updated, it will take the
corresponding EditRole value as before to ensure it is updated correctly.
Task-number: QTBUG-59632
Change-Id: Ibbccc3e9477de1cdefb654051b97dd111df36382
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDesktopWidget::screenGeometry() was deprecated in 5.11 and replaced
by QScreen::geometry()
Change-Id: I23f5b6a4ed6b76cf558cd8d3ad49bc8029c16f61
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is useful as well when trying to figure out what a CBOR file
contains or how it may fail to parse.
Change-Id: Ic38ec929fc3f4bb795dafffd150ad7c0bd8e9887
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is the counterpart of the previous commit.
[ChangeLog][QtCore] Added QCborStreamReader and QCborStreamWriter,
classes for low-level reading and writing of CBOR streams.
Change-Id: Ia0aac2f09e9245339951ffff13c72e4bffdf4a56
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
