Don't bother overwaiting in waitForDone(), if it was done at one point
after it was called we can return true. And do not stop threads recently
awakened by a startThread call as they have tasks to do.
Make allowing at least one thread regardless of reservation more
standard instead of hacked in certain places.
Pick-to: 6.2
Change-Id: I304bcdc5822f440d5e72fc33ba2aa1678c9ba0d0
Reviewed-by: David Faure <david.faure@kdab.com>
Testlib is not thread safe. Store the status into variable and check
it in the main thread instead.
Pick-to: 6.2
Change-Id: I840c8a3dceb1115a1b81ffeaa0fab96f9d2f1ff0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unix QThread implementation stores pthread_t as a system thread ID
when the thread is created, but never resets the system ID when
those threads are destroyed. Some implementations may reuse the
same thread IDs for new threads, and this may cause QThread::wait()
to erroneously complain that "Thread tried to wait on itself".
This patch sets the system thread ID to nullptr when the thread is
about to exit and be destroyed by the system.
A regression test is added to tst_qthread.
Fixes: QTBUG-96846
Pick-to: 5.15 6.2
Change-Id: I0850425dd0e09af50e59c9038e7e662a2a624beb
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Ensure that expired threads have actually finished before attempting
to restart them. Calling start() on a thread that is not yet finished
does nothing.
Add a regression test into tst_qthreadpool that attempts to trigger
reuse of expired threads and verifies that all submitted tasks
execute.
Fixes: QTBUG-72872
Pick-to: 6.2
Change-Id: I2109b628b8a4e91491115dc56aebf3eb249646b5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test is randomly failing in the CI on QEMU. Couldn't reproduce it on
the actual armv7 hardware, so most likely it's not a Qt bug.
Fixes: QTBUG-96103
Pick-to: 6.1 6.2
Change-Id: I60b7264c6ce44b3b327fdd0dbcede006717c65a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In the process, actually use the constants as the size of some arrays,
instead of making [1024] arrays and then only using a few entries.
Change-Id: I9f36b322840393b8680788190cf8b40a828f4957
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QtConcurrent::RunFunctionTask class keeps a variable to store the
result of QtConcurrent::run when it becomes available, so that it can be
reported afterwards. This requires the result type to be
default-constructible. However there's no need in storing the result, it
can be reported immediately after it becomes available.
Pick-to: 6.1 6.2
Fixes: QTBUG-95214
Change-Id: I95f3dbff0ab41eaa81b104a8834b37d10a0d193a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
When the test failed, it never released the blocking slot, so the
tested thread remained blocked indefinitely. Blacklisting doesn't
rescue that: the test run gets killed by Coin's watchdog.
Use a QScopeGuard() to release the clocked slot on failure.
replacing the release that was happening only on success.
As drive-by clean-up, smarten up the code a little and remove an
unused enum.
Pick-to: 6.2 6.1 5.15
Change-Id: Ie035dafe6e4b1d82aea5de38ceb31c0f7fcf81d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
C++20 deprecated compound volatile statements such as pre- and
post-increments, to stress that they're not atomic. So instead of
volatile i;
~~~~;
++i;
you're now supposed to write
volatile i;
~~~~;
int j = i; // volatile load
++j;
i = j; // volatile store
which matches more closely what hardware does.
Instead of fixing every use of volatile pre- or post-increment in this
fashion individually, and realising that probably a few more Qt
modules will have the same kind of code patterns in them, write
QtPrivate functions to do the job centrally.
Change-Id: I838097bd484ef2118c071726963f103c080d2ba5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When inserting items into the result store, a ResultItem is created,
which stores a pointer to the results list and their size. If the size
of the ResultItem is set to 0, it means that a single result is stored.
In case of trying to report results via an empty list, the size is 0, so
result store treats it as a single result.
Added checks before storing the results to make sure that the result
list isn't empty. Note that empty lists are allowed in some cases for
the filter mode, because ResultStoreBase::addResults() knows how to
handle those cases correctly.
Task-number: QTBUG-80957
Pick-to: 5.15 6.1 6.2
Change-Id: I399af4c3eef6adf82fea5df031fe9a9075006b1f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All the getters of QFutureWatcher are consistent with the getters of the
corresponding QFuture, except for the isFinished() method, which returns
'true' only after the finished() signal is delivered. This behavior
might be unintuitive for the users. In particular, isFinished() returns
'false', even if it's called immediately after waitForFinished().
[ChangeLog][QtCore][QFutureWatcher][Important Behavior Changes] The
QFutureWatcher::isFinished() method now indicates if the related
QFuture is finished, instead of indicating if the finished() signal was
delivered. This makes it consistent with the future that is being
watched.
Fixes: QTBUG-91048
Pick-to: 6.1 6.2
Change-Id: I6ae9b882b23e06198a82c95b026491bd480b3bf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test causes frequent failures in the CI. Couldn't reproduce on
actual arm64 hardware, so it's likely to be a QEMU bug. From the
available logs it seems that all the test cases are flaky (there's a
failure even after cleanupTestCase() is called), so disable all of them.
Fixes: QTBUG-94737
Pick-to: 6.1 6.2
Change-Id: I783ec2179ba779a2c8d93351a78e8472a4f7a907
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QMetaType now implicitly knows how to convert any QFuture<T> to
QFuture<void> without needing to manually register a converter
function.
QtWebChannel will make use of this to transparently support QFuture<T>
return types.
[ChangeLog][QtCore][QMetaType] QMetaType now supports converting any
QFuture<T> to QFuture<void>.
Task-number: QTBUG-92903
Change-Id: Ied7e71be37c346cc3d2c274ffb0d91a6821ab4d4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For generic interop with other parts of Qt, we need to be able to
extract the type-erased internal storage of QFuture<T>. In particular,
QtWebChannel needs this to transparently support QFuture<T> as a method
return type.
Task-number: QTBUG-92903
Change-Id: I763f054656b8810d58720262d364baf42c47eb37
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
... and C++20 std::counting_semaphore API compatibility.
[ChangeLog][QtCore][QSemaphore] tryAcquire() now optionally takes a
<chrono> duration as timeout, not just int milliseconds.
[ChangeLog][QtCore][QSemaphore] Added try_acquire{,_for,_until}() for
C++20 std::counting_semaphore compatibility.
Change-Id: I34b6b4bf57a54745d4b97349903d090c4995338a
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The check is over-arching. is_move_constructible is sufficient;
we don't have to support "ridiculous" types that are copiable but
have deleted move operations (such types are fundamentally broken).
This is in line with the Move* (legacy) named requirements.
Change-Id: Idc7116b39013501b9be39628a4e7afd35fe15530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The API allows users to request and check the status of various
permissions. A predefined enum class of the common permission types
on different platforms is used to allow requesting permission with
a common code. Platform specific permissions are defined only on their
relevant platform. For permissions that are not predefined, they can
be requested via a string variant of this API.
This adds the Android implementation only.
[ChangeLog][QtCore] Add new API for handling app permissions with an
initial implementation for Android.
Task-number: QTBUG-90498
Change-Id: I3bc98c6ab2dceeea3ee8edec20a332ed8f56ad4f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Even if the user (usually accidentally) sets a thread count of zero or
negative. The reporter in the bug report did
QThread::idealThreadCount() - 1 on a 1 CPU system...
Drive-by add to the documentation and the missing #include.
Pick-to: 6.1 6.0
Fixes: QTBUG-93007
Change-Id: I6cdea00671e8479b9c50fffd167807d14e030154
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The test use aggregate initialization on some classes which however
are no longer aggregates in C++20 (the rules changed again; in C++20
having a user-*declared* constructor makes a class not an aggregate).
Just add a constructor so the code keeps compiling in both 17 and 20.
Fixes: QTBUG-92963
Pick-to: 6.0 6.1
Change-Id: I52371c5ee34c84358987b5ae8bee9ab9c49c8eab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
During reportFinished we may call a continuation which might end up
triggering one of the signals.
Pick-to: 6.0 6.1
Change-Id: I19546fcca12be71cd536e4287eb5eddd9d236830
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Currently, QThreadPool's generated threads inherit the priority from the
thread they are created and that cannot be changed. This merge request
adds a property to QThreadPool so that the priority of the threads can
be different.
The default behavior does not change.
[ChangeLog][QtCore][QThreadPool] QThreadPool can now be configured to
use a different thread priority when creating new threads than the one
it inherits from the thread it was created in. This will only apply to
the threads started after the property is changed.
Fixes: QTBUG-3481
Change-Id: Ic98d4312d055a3357771abb656516ebd0715918d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When attaching a continuation with the default (QtFuture::Launch::Sync)
policy, it will be launched in the same thread where the parent has
been executing, or in the thread where the parent lives, if the
continuation is attached after the parent has already finished. Fixed
the test-case to make sure the continuations are attached while the
parent is still running, so that they can be resolved in the parent's
context.
Fixes: QTBUG-91373
Pick-to: 6.1
Change-Id: I82b3b0c47b76d121b44bd512659c08b3b474e351
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit 8f8405e046.
Reason for revert: Appears not entirely thread-safe and caused QTBUG-90705
Change-Id: I390c0b1a555a18e6a095b52010371d017071e26b
Fixes: QTBUG-90705
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Ported all properties, except activeThreadCount. Marking it dirty may
cause a re-evaluation of properties depending on it, which may reault in
a deadlock in case of trying to read activeThreadCount property which is
being marked as dirty.
Task-number: QTBUG-85520
Change-Id: Id073b0895c89a9e6b05b57ad520db994e550a1c9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Don't use raw pointers when allocating memory, it won't be deleted if
the test-cases fail.
Change-Id: I212a12c988f401f97c2c92a7fae09b2aa7d913a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Fixed the following warnings:
- empty expression statement has no effect; remove unnecessary ';'
to silence this warning
- zero as null pointer constant
- no previous extern declaration for non-static variable
- use of old-style cast
- integer conversion warnings
Change-Id: Ieb31b127ce8e3b543aaf88a8e8fc463dcc8bc4e3
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Added overloads of .then()/.onFailed()/.onCanceled() which take a
pointer of a context object, and invoke the continuations in the
object's thread.
Task-number: QTBUG-86794
Change-Id: I0f3cbb0500695673fc4087af5d4b96b416e3e1ce
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
[ChangeLog][QtCore][QFuture] Add convenience functions to create
a ready QFuture and a QFuture with an exception
Task-number: QTBUG-86713
Change-Id: Ic7f9ca590a8ea8a9696b84f35bad074780794461
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Previously QFutureInterface::setProgressValue was silently ignoring
the progress range and allowed to set any progress value.
Also no checks were performed in QFutureInterface::setProgressRange,
which allowed the user to set minimum > maximum.
Add checking of the current progress range, when settings the
progress value.
Add checks for minimum and maximum values while setting the progress
range.
The implementation of the checks is mostly based on the logic
that is used in QProgressBar.
- If maximum is smaller than minimum, minimum becomes the only legal
value.
- If the current progress value falls outside the new range, the
progress value is set to be minimum.
- If both progressMinimum() and progressMaximum() return 0, the
current progress range is considered to be unused, and any progress
value can be set.
- When setting the value using setProgressValue(), if the value falls
out of the progress range, the method has no effect.
Task-number: QTBUG-84729
Change-Id: I29cf4f94b8e98e1af30dd46fbdba39c421cf66bf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- Remove the casting operator of QFuture<T> to T. It calls
QFuture::result(), which may lead to undefined behavior if the user
has moved the results from QFuture via QFuture::takeResult() before
trying to do the conversion.
- Disable implicit conversion of QFuture<T> to QFuture<void>, by making
the constructor explicit. If the users really intend to do the
conversion, they should do it explicitly.
[ChangeLog][Source-Incompatible Changes][QFuture] Implicit conversions
of QFuture<T> to T and to QFuture<void> have been disabled. Use
QFuture::result() or QFuture::takeResult() where you need to convert
QFuture<T> to T. Use the explicit QFuture<void>(const QFuture<T> &)
constructor to convert QFuture<T> to QFuture<void>.
Change-Id: I153d4137d36365b1611ac934fb3ac2eb667fdd6c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
These operators don't do what the user might expect and may lead to
confusing results.
[ChangeLog][Source-Incompatible Changes][QFuture] The comparison
operators of QFuture have been removed. They were comparing the
underlying d-ptrs instead of comparing the results (as the users
might expect), which is not very helpful for the users point of view.
Change-Id: I80a887610eac38b60329128cca52cdb5fb515207
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As requested by a ### Qt 6 comment. This then implied a few other
functions weren't constexpr, which broke some tests.
Task-number: QTBUG-85700
Change-Id: I6522a9b2d7a74e117442121400a1d7198d323967
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These classes should not inherit from each other
anymore in Qt 6. The reason is that this makes
the 95% case of using a non-recursive mutex
much slower than it has to be.
This way, QMutex can now inline the fast path
and be pretty much as fast as QBasicMutex is
in Qt 5. They actually use the same code paths
now. The main difference is that QMutex allows
calling tryLock() with a timeout, which that
is not allowed for QBasicMutex.
[ChangeLog][QtCore][QMutex] QMutex does not support
recursive locking anymore. Use QRecursiveMutex for that
purpose. QRecursiveMutex does not inherit QMutex anymore
in Qt 6.
Change-Id: I10f9bab6269a9181a2e9f534fb72ce65bc76d989
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Proposed during API review
Change-Id: I9c43e1915c50803ab69bfe07a91c05d2224b86c4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Changed QPromise::addResult() to return bool value. True is returned
when result is added and false is returned when e.g. promise is in final
state (canceled or finished) or when addResult() is called twice with
the same index as argument (in which case new value is rejected)
Updated QFutureInterface::reportFinished() that accepts optional result
as argument to align with other result adding methods. This function
is "internal" only (as of now), so no documentation update is needed
Change-Id: I2d63069246e5e5c8cf04529c22bb296faaaae53d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
One can call addResult(value, index) twice and consequently set the
value twice by the same index. This seems rather strange and probably
should not be allowed. This commit rejects setting results when there's
already a valid result by that index. Consequently, this fixes memory
leaks caused by N-times-called addResult(..., index)
Fixes: QTBUG-86828
Change-Id: I77494f2cb73ce727ffad721cfcdcaa420899eb25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QFuture::takeResult() currently returns std::vector instead of QList,
because QList does not support move-only types. Disable this method
until QList is fixed to work with move-only types in Qt 6.1.
Also did minor doc-fixes.
Change-Id: I87feaf75d9433a3b540edd00039c3e21d6994985
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
