This reapplies the fix from 1ecf2212fa,
using QApplication::translateRawTouchEvent to dispatch the touch event
received by the QGraphicsProxyWidget to the relevant child widgets
under each touch point.
In addition, limit the implicit grabbing of each touch point before
sending the event to those cases where we have to: touch pads, and
if the target widget comes from a closest-widget matching. And don't
call the QTouchEvent override of QEvent::setAccepted() on QTouchEvent
instances in QGraphicsView classes, as this will override each event
point's acceptance state.
This way, we can identify which touch points have been accepted after
event delivery, any only implicitly grab those points that were.
Otherwise, touch points not accepted by a proxied widget hierarchy
will still be part of an accepted event, and be grabbed by the
viewport of the QGraphicsView. This would then lead to infinite
recursion when the QGraphicsProxyWidget passes the TouchUpdate event
on to each touch point's grabber.
Re-activate the test case, and extend it with more combinations.
Refactor touch-event recording to make it easier to test multi-touch
scenarios.
Task-number: QTBUG-45737
Fixes: QTBUG-67819
Pick-to: 6.2
Change-Id: Id5611f4feecb43b9367d9c2c71ad863b117efbcb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some backends were missing support for standalone days and months,
also the standaloneDayName() implementation was always using the
same codepath as dayName().
This patch fixes the issues.
Support for narrow format will be added in the following patch.
Task-number: QTBUG-84877
Pick-to: 6.2
Change-Id: I38ee06342cafab544e3c69097bd0e6ae68e85645
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Counting repaints is unreliable on macOS.
Pick-to: 6.2
Change-Id: Ifa1cf516a2cab94540bea005354d8311a2651d64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also when closed by destruction, which as of today doesn't call
QWidget::close and therefore also not QWindow::close.
Pick-to: 6.2
Change-Id: I426255e2274eae9262243c769df2264fbaa915b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QDialog today only hides itself during reject and accept, it doesn't
close itself properly. This is problematic, as it doesn't close the
QWindow.
However, fixing this behavior must not result in duplicate calls to
virtual function, or additional calls to virtual functions (such as
closeEvent) without explicitly flagging the change in the changelog.
Add more tests to document existing behavior so that we can identify
such changes and verify the desired side effects.
Pick-to: 6.2
Change-Id: I1f30701cd766eb3c7957751b51e8579d4542dd16
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When showing a messagebox that has already been show we don't want to
keep around the clicked button of the previous invocation.
Pick-to: 6.2
Change-Id: Ib6f6293d40ab338c550ea344094db871ccf45c46
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It was previously calling setlocale(), which makes no difference to
the Unix backend for the system locale, since that's based on
environment variables (that would normally be used to get default
values for the various setlocale() categories, but only the first time
each is asked for). So, on Unix, set the environment variable, too.
It's also necessary to instantiate a QSystemLocale instance
transiently to trigger a refresh of the system locale data.
Pick-to: 6.2
Change-Id: If92e44053f9021e96c814f4b289f4fadaa7027e0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Verify that closing a QWindow using either the close()
API or a close event works as expected, and that the window
can be re-created. Also test QWindows with child windows.
Task-number: QTBUG-46701
Change-Id: I4c12452ff58e1233536c2d6932e72cf924d8ed74
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We want to close the window, end full screen mode on macOS, and free
platform resources. This is all done by QWindow::close. QWindow::close
closes the platform window, triggering a closeEvent to QWidgetWindow,
which then calls QWidgetPrivate::close_helper.
This way, closing a window via QWidget::close, QWindow::close, or
interactively by the user are all equivalent.
The QCloseEvent generated by the widget needs to be spontaneous for
window-system generated events (i.e. the user clicked the close button),
and non-spontaneous if the window closes because of a call to
QWindow::close. To keep track of whether the event originated in an
explicit call to QWindow::close, add a boolean to the QWindowPrivate.
Add a test case that verifies that the window resources is destroyed,
and that events are delivered as they should.
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Fixes: QTBUG-46701
Pick-to: 6.2
Change-Id: Iacb6a2c8d5e880b16b0c8f0c9257ed94bed36f5b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There were several issues with the socket state checking when the pipe
reader is not running:
- the number of object handles in the WaitForMultipleObjectsEx()
call might have been zero;
- a call to the waitForDisconnected(-1) might have hung;
- we did not perform a loop iteration for the waitFor...(0) calls,
so disconnect detection was unreliable.
These issues are related to the same code, so they don't seem to be
addressable separately.
Change-Id: I3bca872bb4191e6a7d38a693d81f7981af7fe145
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This is the kind of loop that the autovectorizer is pretty good
at, but this is really just a type of memchr, so help dumber
compilers and build modes without vectorization.
Drive-up fix the style of the test code.
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a022a35fa24c17
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There's not much context to the URLs being printed, so remove the
message. And suppress the message coming from the MiniHttpServer
Change-Id: Ie2025ac717657ed0f2f0163bd0af22e12a49b30f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The insertions are sorted by when they expire. So, we test the various
orders to insert entries.
Fixes: QTBUG-95959
Change-Id: I1e8d7f4c77dce5eae3d4bfa5101f296c3eea1961
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
After the last row is moved, 0 will be returned when obtaining
row and column data. At this time, QListView::doitemslayout will
not call d->doitemslayout, so the QBspTree data structure will
not be cleaned up, leaving a stale tree structure behind. This
will trigger an assert during paintEvent handling if QListView is
set to IconMode
In QListView::ListMode the test for a valid model index doesn't
use an assert.
Call QListViewPrivate::clear explicitly if the column count is 0
so that the QBspTree and other data structures are cleared.
Add a test case that simulates this scenario by implementing a
model that returns a 0 column count for an index after the model
structure was changed through a move of rows.
Done-with: Volker Hilsheimer
Fixes: QTBUG-95463
Pick-to: 5.15 6.1 6.2
Change-Id: I36419be5459b8ced930c619f538482ea1db4ad03
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We have previously been using the standalong (nominative) month names
both when asked for that and when asked for the plain (genitive) month
name, probably because there was no LCTYPE value for the
latter. However, MS's docs for the standalone values do contain a
comment telling us how to get the genitive names.
Rename the old monthName() to standaloneMonthName() and add a
monthName() that calls GetDateFormat() suitably, as described by the
MS doc.
Pick-to: 6.2 5.15
Fixes: QTBUG-92018
Fixes: QTBUG-86279
Change-Id: I27f63198c3a15b792683f476d2019078b0860f99
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This mimics the effects of test-code delegating checks to other
functions, which can lead to repeated failures. The failing test
should only contribute one to the total of failed tsts. Drive-by:
correct an existing test's reporting of its own name.
Task-number: QTBUG-95661
Change-Id: I370fd2aee378d9fdd35826f0d11677483c60423d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We can't really compare two NaN's. Should use qIsNaN() for that.
Pick-to: 6.2
Change-Id: Ia514cabe65cfcdeafb39cab91ecdb66f8fae725c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace the “size() / devicePixelRatio()” pattern with
a call to deviceIndependentSize().
Change-Id: I9d9359e80b9e6643e7395028cd43e3261d449ae7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The new test is called tst_qurluts46. It verifies QUrl::{to,from}Ace()
functionality using the data from IdnaTestV2.txt supplied by Unicode.
The file was downloaded from
https://www.unicode.org/Public/idna/13.0.0/IdnaTestV2.txt
Task-Id: QTBUG-85371
Change-Id: I4c6a4942ef6018dafc90cb84ef73f6b2614566d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The testcase was disabled with no explanation in
2766322de3 but seems to work fine.
Change-Id: Ibc22a4ffb756604e22c1f2cf1165919c1d7f1212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit 1ecf2212fa.
The fix is not correct after all. TouchBegin goes to the correct
widget with the fix, but following TouchUpdate and TouchEnd events
now go to the viewport, as QApplication::translateRawTouchEvent always
gives precedence to the widget that Qt recorded to be the touch
grabber, which is the viewport. This results in infinite recursion,
as the proxy widget trying to send the touch events to the embedded
widget (expecting that translateRawTouchEvent will split it up) ends
up sending the events back to the viewport.
Leave the added test case as QEXPECT_FAIL, reactivate the (never run,
hence unnoticed) test that the fix broke.
Pick-to: 6.2 6.1
Task-number: QTBUG-45737
Task-number: QTBUG-67819
Change-Id: I4810affb3cd066743ae94ab7beb2f0c06b60d211
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test case was previously disabled, so tests were added to the
QGraphicsView test instead. With the QGraphicsProxyWidget test active
again, move the test cases where they belong.
Amends 1ecf2212fa,
01aeb5f7e4, and
06235d36ae
Pick-to: 6.2
Change-Id: I208b8a418653cf0640c2e7c9f716fa69538ad7e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
They were de-facto disabled in the qmake build system, and didn't make
it into the cmake build system either. The dependency to the fusion
style is not a build-time dependency since the test uses the
QStyleFactory to create the style, and if that fails, tests can be
skipped at runtime.
As a consequence of not being executed in CI for a long time, many
tests failed. Also, many tests were commented out or skipped as
broken, ambivalent, or nonsensical. Remove that dead code. The
QGraphicsWidget::initialShow test doesn't test anything that initialShow2
doesn't test, but makes incorrect assumptions, so remove it and rename
initialShow2 to initialShow.
Failing tests frequently left QWidget objects undeleted, causing all
subsequent tests to fails as well. Fix that with std::unique_ptr.
Some tests are still unstable and fail on some platforms, handle that
using QEXPECT_FAIL. The forwardTouchEvent test fails due to a bug
in Qt introduced recently. Skipping it for now.
Pick-to: 6.2
Change-Id: I405122ea9d4d150bd1d505d40b83fe39604de0f9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Now that we don't need '\0'-termination on the data, this is possible.
Moved QByteArray's tests to tst_QByteArrayApiSymmetry and added some
more test-cases.
[ChangeLog][QtCore][QByteArrayView] Added numeric parsing methods.
Change-Id: Ic0df91ecfe5dbf6f008d344dd0464d7927f32273
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove third-party code in favor of STL. Implement (for now)
strtou?ll() as inlines on strntou?ll() calling strlen() for the size
parameter. (This is not entirely safe, as a string lacking
'\0'-termination but with at least some non-matching text after the
numeric portion would formerly be parsed just fine, but would now
produce a crash. However, strtou?ll() are internal and callers should
be ensuring '\0'-termination.)
Task-number: QTBUG-74286
Change-Id: I0c8ca7d4f6110367e93b4c0164854a82c5a545e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Include counting of test types, to catch two more cases where totals
don't add up.
Task-number: QTBUG-95661
Change-Id: I9fe5424bc6652c61a065bf2889333e2ed9437c81
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Count how many we expect to pass, fail and be skipped, so we can
report that for comparison with the actual totals line: this reveals
some double-counting, marked with a FIXME.
Task-number: QTBUG-95661
Change-Id: I8b0f13ded5202ed476d8abfee70ed60f9e639bf9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 904617dfb8 and makes
clear to future readers why that wouldn't be a sensible change.
Update the test's data, eliminating a case of duplicate counting that
was caused by the reverted commit.
Task-number: QTBUG-95661
Pick-to: 5.12 5.15 6.1 6.2
Change-Id: Ice6d3ab06ca171e0d6eb0fac757f1ab774e229f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The connect() documentation makes it clear that UniqueConnection does
not work with free functions / function objects and the like; only with
actual PMFs. Rather than silently *ignoring* the flag, be vocal about its
presence by warning, and make the connection fail (as the user has
passed an illegal argument).
[ChangeLog][QtCore][QObject] QObject::connect() now will refuse to
connect a signal to a free function / function object if UniqueConnection
is passed. Note that UniqueConnection has never worked for such
connections -- the flag was simply ignored, and they were established
multiple times. Now, the flag is not ignored and results in a connection
failure (as well as a runtime warning by Qt).
Change-Id: I6509667018c74f9bd24910cde0a1b16c5f84f064
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the generating of private cpp exports for Qt modules.
Add the GENERATE_PRIVATE_CPP_EXPORTS option to qt_internal_add_module
that is the manual switch for private exports generator. Existing
modules in qtbase doesn't follow any strict convention of using
private cpp export. So there is no clue how to detect if generating of
the private exports is required or not for the module.
Use autogenerated private cpp exports in QtNetwork module.
CPP_EXPORT_HEADER_NAME argument of the qt_internal_add_module function
is replaced by the CPP_EXPORT_HEADER_BASE_NAME and has a different
meaning. The provided name is used as a base name for the private and
non-private headers that contains cpp exports. Header files suffixes
are constant: .h and _p.h for the non-private and private header files
accordingly.
Pick-to: 6.2
Task-number: QTBUG-90492
Change-Id: Icf11304e00379fb8521a865965c19b974e01e62f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add infrastructure to build cmake auto tests in the CI when targeting
iOS.
Currently the are only CI instructions for qtbase.
More work is needed to make it work for other repos.
With this change, we will build a single Widgets application targeting
the iOS simulator. We can't target the device SDK in the CI because
signing fails due to a missing signing certificate and provisioning
profile.
The Coin instructions will now set a QT_BUILD_ENVIRONMENT=ci env var
whose value will be checked in _qt_internal_test_expect_pass, to
ensure we build for the simulator SDK when using a universal Qt.
Without this, xcodebuild will try to build with the device SDK and
fail to build the project.
Pick-to: 6.2
Task-number: QTBUG-95839
Change-Id: Ib39c9527b107b2004746ccbdc9d9d1d658f88c76
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Just sending the event to the embedded widget is not enough, we
have to perform hit-testing for the different touch points, and
send the event to the child widget under the point. Fortunately,
QApplicationPrivate::translateRawTouchEvent provides the logic
that generates multiple events for groups of touch points.
Since that helper always sent events spontaneously, add an
optional parameter to allow sending of non-spontaneous events.
Add a test case that simulates touch events to different widget
configurations inside a QGraphicsProxyWidget.
Fixes: QTBUG-67819
Task-number: QTBUG-45737
Pick-to: 6.2 6.1 5.15
Change-Id: Iffd5c84c64ee2ceadc7e31863675fdf227582c81
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When a needle has length 1 (because it's a QChar/char16_t, or because
it's a string-like of length 1) then an ad-hoc search algorithm is
used. This algorithm had a off-by-one, by not allowing to match at
the last position of a haystack (in case `from` was `haystack.size()`).
That is inconsistent with the general search of substring needles
(and what QByteArray does). Fix that case and amend wrong tests.
This in turn unveiled the fact that the algorithm was unable to cope
with 0-length haystacks (whops), so fix that as well. Drive-by, add a
similar fix for QByteArray.
Amends 6cee204d56.
Pick-to: 6.2
Change-Id: I6b3effc4ecd74bcbcd33dd2e550da2df7bf05ae3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use U+FB01 LATIN SMALL LIGATURE FI instead of U+00DF LATIN SMALL
LETTER SHARP S in testcases that need non-ASCII URLs that are
normalized to ASCII. The latter is not normalized to ASCII when
using UTS #46 nontransitional processing.
Task-number: QTBUG-85371
Change-Id: I8c153feb58e556b1d31439018cc84d8e8f1de1a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
U+04CF CYRILLIC SMALL LETTER PALOCHKA was undefined in Unicode 3.5 used
by IDNA2003 but it is allowed in UTS #46.
Task-number: QTBUG-85371
Change-Id: I7f5c0f6dc57f1197fd509e98328207d6179f1624
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
IDNA 2008/UTS #46 do not use nameprep anymore and have different
validity rules.
Unexport qt_nameprep() and qt_check_std3rules() because they
are not used by any tests anymore.
Task-number: QTBUG-85323
Change-Id: I38c0dbae9a6bd108fbcfac350767aa7e757e786f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use U+1F100 DIGIT ZERO FULL STOP instead of U+1F4D9 ORANGE BOOK.
The latter is not allowed according to IDNA 2003 rules but is allowed
according to UTS #46 rules. The former is disallowed in either case.
Task-number: QTBUG-85371
Change-Id: Idc8afef68c26ae0b702a475e5a53592182998a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Relying on the fact that a given capturing group captured a null string
doesn't allow users to distinguish whether a capturing group did not
capture anything, or captured a null substring (say, from a null subject
string).
Perl allows for the distinction: the entries in the @- and @+ arrays are
set to values in case there is a capture, but they're undef otherwise.
PCRE2 gives us the information already in the results "ovector", but
it was simply not exposed to QREM users. So, expose it.
[ChangeLog][QtCore][QRegularExpressionMatch] Added the hasCaptured()
family of functions to know if a given capturing group has captured
something.
Change-Id: Ic1320933d4554e2e313c0a680be1b1b9dd95af0b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was not ported to CMake yet.
Pick-to: 6.2
Fixes: QTBUG-88601
Change-Id: Ied3b1a0e2ddfbcf003cb0d8d01d5f64cb83cf4e7
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The nested widget might be a QGraphicsView as well (documented to be
supported), and QGraphicsScene maintains it's own activation status by
counting Window(De)Activate events. We need to make sure that the
embedded widget is informed about its activation status so that deeper
nested children can receive focus.
Forward WindowActivate/Deactivate events to the nested widget, which
will pass it on to all its children. Add test case, which without this
fix fails when verifying the inner scene's isActive state, or later
when testing that focusInEvent is delivered to the embedded widget.
Fixes: QTBUG-94091
Pick-to: 5.15 6.1 6.2
Change-Id: I4e0ecef50685ed081d15c7f76b6c1a4a40ed2682
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
An oversight in the code kept the algorithm in the GB11 state, even if
the codepoint that is being processed wouldn't allow for that (for
instance a sequence of ExtPic, Ext and Any).
Refactor the code of GB11/GB12/GB13 to deal with code points that break
the sequences (falling back to "normal" handling).
Add some manual tests; interestingly enough, the failing cases are not
covered by Unicode's tests, as we now pass the entire test suite.
Amends a794c5e287.
Fixes: QTBUG-94951
Pick-to: 6.1 5.15
Change-Id: If987d5ccf7c6b13de36d049b1b3d88a3c4b6dd00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, actually use the constants as the size of some arrays,
instead of making [1024] arrays and then only using a few entries.
Change-Id: I9f36b322840393b8680788190cf8b40a828f4957
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As QPropertyAlias was public by accident in 6.0, we have to ensure that
it still works in 6.2.
This re-adds some tests for it, and reimplements the unlinking
functionality. To avoid performance regressions in hot-paths,
a new unlink_fast function is added, which behaves like the old unlink:
It ignores the special handling for QPropertyAlias, so that we can skip
the tag check. It is only used in QPropertyObserverNodeProtector and
clearDependencyObservers, where we already know the type of the
observer.
Fixes: QTBUG-95846
Pick-to: 6.2
Change-Id: Ifb405b8327c4d61c673b1a912ed6e169d27c2d8f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When assigning multiple variables to a specific section, both GCC
and Clang legitimately error out if those variables wouldn't end
up in the same section (e.g. if one of them is going to a read-only
section while the other one is going to a read-write section).
In C++, when a seemingly const variable needs dynamic initialization,
it needs to be stored in a read-write section.
Clang 13 changed internals for how some constants are materialized.
Now, when a variable is initialized with an expression containing
plain old fashioned casts, it is considered to be potentially
runtime initialized (at the point when section assignment conflicts
is evaluated). Therefore, Clang 13 errors out on fakeplugin.cpp
with errors like:
fakeplugin.cpp:36:39: error: 'message' causes a section type conflict with 'pluginSection'
QT_PLUGIN_METADATA_SECTION const char message[] = "QTMETADATA";
^
fakeplugin.cpp:32:40: note: declared here
QT_PLUGIN_METADATA_SECTION void *const pluginSection = (void*)(0xc0ffeec0ffeeL);
^
See https://bugs.llvm.org/show_bug.cgi?id=51442 for discussion
on the matter in Clang.
To simplify things, just initialize the fake pointers as regular
uintptr_t instead, avoiding the whole matter. This produces the
exact same contents in the section as before.
For what it's worth, the actual manually constructed metadata in
fakeplugin.cpp doesn't seem to have any effect on running the
QPluginLoader tests on either ELF or MachO right now.
Change-Id: Ib84a2ceb20cb8e3a1bb5132a5715538e08049616
Pick-to: 6.2 6.1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When forcing software scrolling through QScroller::scrollTo,
it will start from (0, 0). QGraphicsViewPrivate::canStartScrollingAt
should consider the locationof points, not just the flags of item.
Fixes: QTBUG-70255
Pick-to: 5.15 6.1 6.2
Change-Id: Iebdd5568baa3bdb41c705204dadb2895cfe9c0e2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add painting of sets of lines, both connected and unconnected, that go
outside the device area.
This prepares for fixes & improvements in the painting code.
Pick-to: 6.2 6.1 5.15
Change-Id: I9cffc760524e9ade42362c9a04949270ac24180f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Don't go via QString when we don't need to.
Put expected after actual, not the other way round.
Give tests and test-cases sensible names.
Prefer function-style cast over C-style.
Change-Id: I0b79534a9cc95f2e312a85394693ac674ff3d1d6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using NoFontMerging, no fallbacks should be resolved. If the
font does not support a specific character in the text, we should
display a box instead of merging it with another font.
But in practice, Qt would still apply the fallback mechanism for
one specific case: If the font itself does not support the script
of the text, we would get no match and do a search for a fallback
instead. Since NoFontMerging is set, we would then force this
as preresolved for *all* scripts in the QFont's private data
(logically, the match should only have a single response for
NoFontMerging).
The end result was that if you set the font family before updating
the text, you would get broken rendering. This can happen e.g. in
Qt Quick, where you could update the font family of a text label
while it contains characters which are not supported by the new
font. Qt would then pick a fallback instead. When you subsequently
update the text, the fallback would already be preresolved for
whatever script this is. If it does not support the updated text,
we would then see boxes, even if the requested font actually would
have supported it.
The fix is simply to do an additional pass if NoFontMerging is set
and we were not able to match with the specified script. Since
the same family might be available in different foundries, with
different writing system support, we still want to do a pass first
to see if we can match the exact script of the text.
Note that QRawFont::fromFont() exploited the bug by using
NoFontMerging for getting the fallback font for a specific
writing system. To keep this working without having to rewrite
fromFont() and risk introducing regressions, we add an argument
to make the findFont() function behave as before. It isn't
super-pretty, but since it is private API it is hopefully fine.
[ChangeLog][QtGui][Text] Fixed an issue with NoFontMerging and
changing font families dynamically, where boxes would be seen in
place of the correct text.
Pick-to: 5.15 6.1 6.2
Done-with: Andy Shaw
Fixes: QTBUG-81770
Change-Id: Ide9a36d7528a1040172c5864fa99e7a82eac4e83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There's no need of duplicating code all over the place; QString can
reuse the implementation of the indexOf/contains/count/lastIndexOf
family of functions already existing for QStringView.
For simplicity, the warning messages (that our autotests actually check)
have been made more generic, rather than introducing some other
parameter (as in, "which class is using this functionality so to emit
a more precise warning"), which would have just complicated things as
the implementation of these functions is exported and used by inline
QStringView member functions.
Change-Id: I85cd94a31c82b00d61341b3058b954749a2d6c6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An empty QString(View) is allowed to have nullptr as its data pointer
(of course, only if its size is 0). This wasn't properly
checked in QRegularExpression, which passed such nullptr to
PCRE, and that resulted in PCRE raising an error (PCRE_ERROR_NULL).
Detect this case and pass a dummy pointer to keep PCRE happy.
Fixing and testing this in turn exposed a problem with QStringView
support in QRegularExpression when used over a null QString: the
code is supposed to use the QStringView(QString) constructor and NOT
qToStringViewIgnoringNull. That's because QRE distinguishes null
and empty subjects; when using qToStringViewIgnoringNull over
a null QString, one gets a non-null QStringView (!). Again, this in
turn exposed a problem with a QRegularExpression autotest that assumed
that a null match could only mean "no match" (instead, it can happen at
position 0 of a null QString(View)).
Change-Id: Ifb3cf14dec42ce76fcdbcb07ea1d80784d52ef65
Pick-to: 6.1 6.2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When trying to fix 0-length matches at the end of a QString,
be83ff65c4 actually introduced a
regression due to how lastIndexOf interprets its `from` parameter.
The "established" (=legacy) interpretation of a negative `from` is that
it is supposed to indicate that we want the last match at offset `from +
size()`. With the default from of -1, that means we want a match
starting at most at position `size() - 1` inclusive, i.e. *at* the last
position in the string. The aforementioned commit changed that, by
allowing a match at position `size()` instead, and this behavioral
change broke code.
The problem the commit tried to fix was that empty matches *are* allowed
to happen at position size(): the last match of regexp // inside the
string "test" is indeed at position 4 (the regexp matches 5 times).
Changing the meaning of negative from to include that last position (in
general: to include position `from+size()+1` as the last valid matching
position, in case of a negative `from`) has unfortunately broken client
code. Therefore, we need to revert it. This patch does that, adapting
the tests as necessary (drive-by: a broken #undef is removed).
Reverting the patch however is not sufficient. What we are facing here
is an historical API mistake that forces the default `from` (-1) to
*skip* the truly last possible match; the mistake is that thre is simply
no way to pass a negative `from` and obtain that match. This means that
the revert will now cause code like this:
str.lastIndexOf(QRE("")); // `from` defaulted to -1
NOT to return str.size(), which is counter-intuitive and wrong. Other
APIs expose this inconsistency: for instance, using
QRegularExpressionIterator would actually yield a last match at position
str.size(). Similarly, using QString::count would return `str.size()+1`.
Note that, in general, it's still possible for clients to call
str.lastIndexOf(~~~, str.size())
to get the "truly last" match.
This patch also tries to fix this case ("have our cake and eat it").
First and foremost, a couple of bugs in QByteArray and QString code are
fixed (when dealing with 0-length needles).
Second, a lastIndexOf overload is added. One overload is the "legacy"
one, that will honor the pre-existing semantics of negative `from`. The
new overload does NOT take a `from` parameter at all, and will actually
match from the truly end (by simply calling `lastIndexOf(~~~, size())`
internally).
These overloads are offered for all the existing lastIndexOf()
overloads, not only the ones taking QRE.
This means that code simply using `lastIndexOf` without any `from`
parameter get the "correct" behavior for 0-length matches, and code that
specifies one gets the legacy behavior. Matches of length > 0 are not
affected anyways, as they can't match at position size().
[ChangeLog][Important Behavior Changes] A regression in the behavior of
the lastIndexOf() function on text-related containers and views
(QString, QStringView, QByteArray, QByteArrayView, QLatin1String) has
been fixed, and the behavior made consistent and more in line with
user expectations. When lastIndexOf() is invoked with a negative `from`
position, the last match has now to start at the last character in the
container/view (before, it was at the position *past* the last
character). This makes a difference when using lastIndexOf() with a
needle that has 0 length (for instance an empty string, a regular
expression that can match 0 characters, and so on); any other case is
unaffected. To retrieve the "truly last" match, one can pass a
positive `from` offset to lastIndexOf() (basically, pass `size()` as the
`from` parameter). To make calls such as `text.lastIndexOf(~~~);`, that
do not pass any `from` parameter, behave properly, a new lastIndexOf()
overload has been added to all the text containers/views. This overload
does not take a `from` parameter at all, and will search starting from
one character past the end of the text, therefore returning a correct
result when used with needles that may yield 0-length matches. Client
code may need to be recompiled in order to use this new overload.
Conversely, client code that needs to skip the "truly last" match now
needs to pass -1 as the `from` parameter instead of relying on the
default.
Change-Id: I5e92bdcf1a57c2c3cca97b6adccf0883d00a92e5
Fixes: QTBUG-94215
Pick-to: 6.2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All the tests were using the C locale, so were equivalent to tests of
QTime::toString(). Add a locale column and some test-cases in
preparation for a change to am/pm indicators.
Task-number: QTBUG-95790
Change-Id: I3ad917b7a6f3d3bfe31d6a5a5da596025f173e81
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ImAbsolutePosition was added in f8dbed1226,
based on requirements on Android, but without an implementation for
QLineEdit. It would seem sensible to fall back to the cursor position
in this case, as QLineEdit doesn't support multiple blocks.
Pick-to: 6.2
Change-Id: Iff1255270ceef069f03ce457df633d7b675f1a28
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QtConcurrent::RunFunctionTask class keeps a variable to store the
result of QtConcurrent::run when it becomes available, so that it can be
reported afterwards. This requires the result type to be
default-constructible. However there's no need in storing the result, it
can be reported immediately after it becomes available.
Pick-to: 6.1 6.2
Fixes: QTBUG-95214
Change-Id: I95f3dbff0ab41eaa81b104a8834b37d10a0d193a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Doing the deletion at the end of the block only works if the test
passes. Drive-by: remove spurious braces from single-line bodies of
single-line controls. The QTest macros are done properly.
Pick-to: 6.2 6.1 5.15
Change-Id: I83002547dba49ab9792f4db44d73151b1c036900
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
When the test failed, it never released the blocking slot, so the
tested thread remained blocked indefinitely. Blacklisting doesn't
rescue that: the test run gets killed by Coin's watchdog.
Use a QScopeGuard() to release the clocked slot on failure.
replacing the release that was happening only on success.
As drive-by clean-up, smarten up the code a little and remove an
unused enum.
Pick-to: 6.2 6.1 5.15
Change-Id: Ie035dafe6e4b1d82aea5de38ceb31c0f7fcf81d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Test both Abort and Continue cases. Test more with successive marked
as expected failure. Test cases with a QSKIP after the marked check.
Unify data functions where practical.
Change-Id: I2eade5e4dd0907d23e37137ce3d93cd5ca79f802
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Exhausts the entire buffer which double-conversion is left to work with.
Also has a large amount of precision, which apparently we need to store
temporarily.
Task-number: QTBUG-88484
Change-Id: I87e8c323676465f1b8695e086020df1240d0d0d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add more overflow checks from the sample code in RFC 3492.
Also check if a code point to be inserted into output is in
the allowable range for Unicode.
Rewrite all overflow checks to use {add,mul}_overflow()
functions.
Do not try to process any inputs that are too long to be
part of a valid domain name label.
This fixes a test in tst_qurlinternal.
Fixes: QTBUG-95689
Pick-to: 6.2
Change-Id: Ice0b3cd640d8a688b63a791192ef2fa2f13444be
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Take the rvalue insert() function and turn it into the emplace()
function. Reformulate rvalue-insert using emplace(). Lvalue insert()
is using a different code path, so leave that alone. This way, we
don't need to go overboard with testing.
[ChangeLog][QtCore][QVarLengthArray] Added emplace(), emplace_back().
Change-Id: I3e1400820ae0dd1fe87fd4b4c518f7f40be39f8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In order to fix QTBUG-95552 properly we have to add APIs to
QGraphicsSceneWheelEvent that informs QGraphicsProxyWidget about
whether the event is a high-precision event where Qt grabs the
wheel.
If it is, then the wheel grabber will be the QGraphicsView's viewport,
and any wheel event sent to any widget will be grabbed by it. This
results in infinite recoursion, partly fixed in change
I78400ceae8da7a4e22a988c06ed58f99f1a979f4.
The proper fix is to re-grab the wheel by the embedded widget
if it (or any of its children) accepts the ScrollBegin event (and if
not, return the grab to the QGraphicsView).
This fixes the scenarios that failed in the test case, so now scrolling
through nested widgets and scrolling in nested widgets works as the
user would expect.
Fixes: QTBUG-95552
Pick-to: 6.2
Change-Id: I3e1f31cbff999c70f8c63c034f77cd2ae567d7e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For high-precision wheel scrolling sequences, the widget that gets
the first (typically ScrollBegin) event grabs the wheel. Qt directs
all future wheel events within the same sequence (i.e. until ScrollEnd)
to that widget.
QGraphicsView passes wheel events through to the item under the mouse,
and QGraphicsProxyWidget implements wheelEvent to forward a synthesized
QWheelEvent to the embedded widget. Since QGraphicsView's viewport has
already grabbed the wheel, any forwarded event would end up back in
QGraphicsView, resulting in infinite recursion (if the assert doesn't
fail first in debug builds).
The correct fix requires that QGraphicsProxyWidget knows that this is
a high-precision wheel event, allowing it to adjust the wheel grabber
temporarily to the embedded widget. However, QGraphicsSceneWheelEvent
doesn't provide this information.
To fix the infinite recursion, mark the generated event as synthesized
by Qt (but still send it spontaneously to enable propagarion within
the proxy widget hierarchy). In QApplication's notification routine,
interpret such events then to override the wheel grabber.
Add a test case for the various scenarios. This 6.1 compatible fix
does not pass all situations. A follow up commit that introduces the
missing APIs to QGraphicsSceneWheelEvent then fixes those as well.
Task-number: QTBUG-95552
Pick-to: 6.1 6.2
Change-Id: I78400ceae8da7a4e22a988c06ed58f99f1a979f4
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Changing the screen orientation will cause the menu position to be
displayed incorrectly. When the screen is rotated, the geometry of
the application changes. We can refer to the handling of the menu
on Android or IOS. Close the popup window when the screen
orientation changes.
Fixes: QTBUG-95607
Pick-to: 6.2
Change-Id: I55e1cd6a8b89e375c6714a9163dfb1902d52f101
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Unlike simplified(), it just moves the end-points, without needing to
modify contents, so it makes sense (as for QStringView and
QLatin1String) to provide it. Moved QByteArray's trimmed() tests to
tst_QByteArrayApiSymmetry so that QBAV can now share them.
[ChangeLog][QtCore][QByteArrayView] Added trimmed().
Change-Id: Ifd7a752adb5f3d3e2ad0aa8220efa7e7d2d39baa
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QFont should be constructed with a list of font families.
Pick-to: 6.2
Change-Id: I61141b25d3f6e25f4fea141acbfa8e164d7af58f
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Return ASCII sequences that start with xn-- but fail Punycode
decoding as is when converting URLs to Unicode. This is consistent
with handling of sequences that do decode successfully but fail other
validity checks.
This fixes one test in tst_qurlinternal.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I63d7197f25102c96f5dc21d9fecec5e015c531cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test string "xn--l0902716a" encodes 2**32. Currently
the IDNA code returns an empty string when encoding this
to Unicode instead of expected original string.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I5ce7bcc744c9d5426f66b8a7d0ae76c7c92f552b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use a lambda to simplify testcases for bad IDNs.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Ia4f3a5dbc73c74968628d89bd64d7aa6692b1c46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When formatting numbers, if the fill character used to left-pad to
field widths is '0', the code delegates that padding to the
QLocaleData's ZeroPadded formatting option. Since we want the zeros
before any minus sign, and don't want to subsequently add more zeros
before it, check that this has worked as expected when calling
replaceArgEscapes(), to confirm that it doesn't need to worry about
that.
Add some tests that verify the expected behavior.
In the process, tidy up the code doing this. Rename a local variable
to match our coding style, split a long line.
Pick-to: 6.2
Change-Id: I7cc430c5bceb006cf4e226bca33da16bd2bb1937
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The Qt style sheet reference claimed that Length properties can be
specified in 'em' or 'ex' units, but that was never implemented.
Add the missing implementation. Since the sizes depend on the size of
the font of the current element, we cannot convert the units in the CSS
parser, but have to do so in the QRenderRule constructor, where we can
make a decision about which font to use if the style sheet itself doesn't
specify a font. Fall back to the widget font if possible; otherwise it
will be the application default font.
The implementation translates em into QFontMetrics.height, identical to
what is already done in the QCssParser. This is in line with the CSS
specification, but contradicts our previous documentation which stated
that 'em' means "width of M". Fix the documentation.
Fixes: QTBUG-8096
Pick-to: 6.2
Change-Id: I145e2504ae3b19101a0d0dd63653466b6c2cec1d
Done-with: Cristian Maureira-Fredes <Cristian.Maureira-Fredes@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The separation between <system-out> and <system-err> is sufficient, and
we can't expect consumers to interpret our custom comment format.
The type of the text node has been renamed to more accurately identify
its purpose.
Pick-to: 6.2
Change-Id: I63c8ff17529fc087e1b695698350a6711eb5e68d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's used to handle qCritical() messages, and corresponds to QtMsgType's
QtCriticalMsg, so change its name to reflect what it really is.
In the process, reclassify the -maxwarnings overflow message as a warning,
rather than a critical message.
Pick-to: 6.2
Change-Id: I87626117a547ae4498d5dc352b93bd6db8bfb332
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original Ant JUnit reporter only writes <system-err> and <system-out>
to the <testsuite>, but more modern reporters such as Maven Surefire
scopes output to each individual <testcase>.
This is also handled by both the Jenkins JUnit and xUnit plugins, e.g.:
https://github.com/jenkinsci/junit-plugin/commit/145eb5c98
Pick-to: 6.2
Change-Id: I20c87276004a4e0910fc18e05e6ffa0f5e5a7b7c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The -silent option to tests is only supported with the plain text
logger, so we don't need to maintain expectation files for the
others.
Pick-to: 6.2
Change-Id: I0f42bfe90d82b7ce04f550c747d4a80e99621e74
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Test errors represents unanticipated problems, e.g., an unhandled
exception, or a problem with the implementation of the test.
Pick-to: 6.2
Change-Id: I87219e7ffdea56862278f005de44526ad97545f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qt6_enable_object_libraries_finalizer_mode is not needed anymore
now that static Qt builds require CMake 3.21 and thus CMake takes
care of placing object library object files at the beginning of
the link line.
Rename qt6_enable_import_plugins_finalizer_mode to a more generic
qt6_set_finalizer_mode that can enable or disable multiple
different modes.
For now the only available mode is "static_plugins" which handles
the behavior of the old function name.
The mode can be enabled by calling
qt6_set_finalizer_mode(${target} ENABLE MODES "static_plugins")
Note that the function is re-tagged as being in Technical Preview.
Ideally we would not need it at all. But we need to provide some
workaround for the limitations of linking Qt static plugins in CMake
on Linux-y platforms that use bfd ld or ld.gold.
The workaround does not work well with dependencies wrapped in
generator expressions which is why we can't confidently advertise it
as a proper solution.
Our hope is that this can be fixed in future upstream CMake versions
and the function can be removed.
See 6fcc272ac9 for details.
Adjust the tests due to the renamed and removed functions.
Amends 19e789bace
Amends cdbb390c4a
Amends a25027eecb
Amends 6fcc272ac9
Amends a3c430f390
Pick-to: 6.2
Fixes: QTBUG-95169
Task-number: QTBUG-95601
Task-number: QTBUG-95603
Change-Id: I51b85f776ec29fc04fed1a637eba7d1f60609e69
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add two tests for decoding IDNs when they encode values outside Unicode
(> 0x110000).
"xn--5p32g" decodes to "a" (all ASCII) before QTBUG-95577 got fixed.
"xn--400595c" decodes to the same value as "xn--097c" after the above
mentioned bug got fixed. This test is currently failing.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Icab55c41e0233b34d57e38232fa90ac42f35a50a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Iterate over Unicode codepoints instead of UTF-16 characters
when converting to/from Punycode as described in the specification.
Additionally reject strings with invalid surrogate pairs when
encoding to Punycode, reject strings with any encoded surrogates
when decoding.
Remove expected failure marking from the test for this issue
in tst_qurlinternal.
Fixes: QTBUG-95577
Pick-to: 6.2
Change-Id: I3dd68f95ada6d652e2fa5c0c3118dcfa0a5f4c4d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Helped quite a lot with OpenSSL 3 not accepting some old algorithms.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-95123
Change-Id: If4894fa86eba7b002465fa661d436ae6ea751989
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QMetaType does. QVariant should do the same.
Pick-to: 6.2
Change-Id: I3419276b78b3b5ce8bd144dee92685195797d568
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Daniel Nicoletti <daniel.nicoletti@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Unlike an acceptable effect in QTableView + QTreeView
setAdjustPolicy(QAbstractScrollArea::AdjustToContents)
unfortunately didn't work for QListViews (and QListWidget).
This patch corrects QListViews AdjustToContents
behavior.
[ChangeLog][QtWidgets][QListView] A more correct implementation
of QListView::viewportSizeHint has been made. That
implies that setting the sizeAdjustPolicy to AdjustToContent
on QListView and QListWidget will now cause the view to
size after the contents and avoid scrollbars.
Pick-to: 6.2
Task-number: QTBUG-58749
Change-Id: I1675115f2348e2fcf0b2c39b451ef337e10eb872
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previous fix hit too widely so some valid horizontal and vertical
lines were affected; the root problem being that such lines have an
empty control point rect (width or height is 0). Fix by caculating in
the pen width.
Pick-to: 6.2 6.1 5.15
Change-Id: I7a436e873f6d485028f6759d0e2c6456f07eebdc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The intention is to remove TYPE as a keyword completely before 6.2.0
release, but in case if that's not possible due to the large amount
of repositories and examples, just print a deprecation warning for
now and handle both TYPE and PLUGIN_TYPE.
Task-number: QTBUG-95170
Pick-to: 6.2
Change-Id: If0c18345483b9254b0fc21120229fcc2a2fbfbf5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We don't produce <failure> elements for them, so we shouldn't include
them in the total count of failures.
In the future we might produce <skipped> elements instead, but for now
remove the incorrect increment.
Pick-to: 6.2
Change-Id: Ia89a5cdaf79f6aa2f92be53180112c40ad6da2c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Hopefully we won't need it but let's have it still at least for
consistency
Change-Id: I72289e65e5e5613174ad4d98cf8d614f9caae8e6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The data itself is not indented, as consumers may read it as verbatim
data.
Pick-to: 6.2
Change-Id: Ia934616cea273feadc3a45d7c74726d4f804f0dc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use U+102F7 as an example. The current code is not able to handle conversion
of Unicode codepoints outside BMP correctly, so mark the test as expected
failure.
Task-number: QTBUG-95577
Pick-to: 6.2
Change-Id: Ifd50cf306bce4940f84cb412de148eac952e6c09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The solution in d3ed7dac8a was needlessly
complicated, and broke a valid use case.
The issue of no identifier being available to parse after the include
has been processed can instead be solved by moving the test for the
closing brace after the include processing.
Fixes: QTBUG-94790
Pick-to: 6.2 6.1 5.15
Change-Id: Ieec4b89e1d117637f11479e8bddc4060f93da43d
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
33d7f76f0e attempted to exercise more
of the blacklisting code, but in doing so didn't account for the
fact that the features it added didn't actually work.
Adding a global blacklisting of * will result in blacklisting
all tests, regardless of any inverse conditions "!*" later on,
such as for the 'pass' test. This would have been evident by
looking at the expectation files, which still showed the test
as a BPASS.
The broken feature should be fixed, but in the meantime let's
clean up the test so it doesn't misrepresent reality.
At the same time we also remove the messages() tests, which was
copied straight out of tst_silent, but doesn't serve any purpose
for the blacklist selftest.
Pick-to: 6.2
Change-Id: I20e4693300aad5e9ff5f17ad22e3dfcb5c49fd0e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The Apache Ant and Surefire Maven specs document a <skipped> element that
can be used to signify skipped test, with a corresponding total skipped
test attribute on the <testsuite>.
The element includes an optional message attribute, documented in the
Surefire spec, and in the Ant source code, but not yet documented in
the reverse-engineered Ant spec:
https://github.com/windyroad/JUnit-Schema/pull/11
Pick-to: 6.2
Task-number: QTBUG-95424
Change-Id: Ib6417a41b9c328836f4017e6ebf7f7e9cd91288d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The errors attribute on the <testsuite> element represents the number of
<error> elements, but we do not produce any at the moment.
Pick-to: 6.2
Task-number: QTBUG-95424
Change-Id: I7196d622a9a6bbb7e79ed2c2886984d539abb1da
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The JUnit test framework did not initially have any XML reporting
facilities built in. Instead, the XML report was generated by the
Apache Ant JUnit task:
https://github.com/apache/ant/search?q=filename%3AXMLJUnitResultFormatter.java
Many users interacted with these reports via the Jenkins JUnit plugin,
which provided graphical visualization of the test results:
https://plugins.jenkins.io/junit/
Due to the lack of an official XML schema for the Apache Ant JUnit
report there was some confusion about what the actual format was.
People started documenting the de-facto format, both as produced
by Ant, and as consumed by Jenkins:
https://github.com/windyroad/JUnit-Schema/blob/master/JUnit.xsdhttps://github.com/junit-team/junit5/search?q=filename%3Ajenkins-junit.xsd
The XML produced by the Qt Test JUnit reporter was far from these
schemas, causing issues when importing results into tools such
as Jenkins, Allure2, or Test Center.
The following changes have been made to improve conformance:
- The 'timestamp' attribute on <testsuite> is is now in ISO
8601 local time, without any time zone specified
- The 'hostname' attribute on <testsuite> is now included
- The 'classname' attribute on <testcase> is now included
- The non-standard 'result' attribute on <testcase> has
been removed
- The non-standard 'result' attribute on <failure> has
been renamed to 'type'
- The <system-out> element on <testsuite> is always included,
even when empty
- The non-standard 'tag' attribute on <failure> has been
removed. Data-driven tests are now represented as individual
<testcase> elements, e.g.:
<testcase name="someTest(someData X)" ...>
<testcase name="someTest(someData Y)" ...>
<testcase name="someTest(someData Z)" ...>
The resulting XML validates against both the de-facto Apache Ant
'JUnit 4' schema and the Jenkins JUnit plugin schema.
Task-number: QTBUG-95424
Change-Id: I6fc9abedbfb319f2545b99b37d059b18c16776ff
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use the right name for the attribute (AI_Message),
rather than fixing it up in QTestJUnitStreamer.
- Don't pretend that we're adding line and file information,
only to discard it in QTestJUnitStreamer.
- Don't pretend to add benchmark information,
only to discard it in QTestJUnitStreamer.
Pick-to: 6.2
Change-Id: Ib6eadc12300157216fe9c6e8bcfebd7eb8a3ea68
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Oliver Wolff reports that this test no longer hangs on Windows; and
the other plafroms for which it was skipped are no longer supported,
so remove the #if-ery that skips this test for platfroms on which
uncompressing corrupt data used to hang.
Change-Id: I94a3fd4b83338fe6e3a97ab055fe05e2f15b6b45
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Move out and share the test data from the QString::number_double() test
and re-use it for this one.
Task-number: QTBUG-88484
Change-Id: I6502d1d360657f6077e5c46636f537ddfdde3a83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was producing a warning about the invalid test, for which
replace_regexp() had anticipated that warning; do the same in
remove_regexp(). The two tests shared a date() method, but the remove
test was a no-op on the tests with non-empty replacement text; move
the column set-up and data rows with empty replacement to remove's
data() function, from replace's, and reverse the direction of calling
each other between data() functions, so each test gets the cases that
are relevant to it and no spurious PASSes happen for no-op tests. In
the process, give moved test-cases informative names; relocate the
(entirely re-written) remove data function to beside its test; and
eliminate a pointless local variable from both tests (it used to be
needed when testing both QRegExp and QRegularExpression).
Pick-to: 6.2
Change-Id: I93dcfc444f984edf5c029f99306aff6bc95d554a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code to work around setlocale() mis-describing en_US as C ensured
that we didn't accept the C test-cases when the locale was really
en_US; but neglected to accept the en_US test-cases when the locale
really was en_US but was misdescribed as C. This lead to no tests
being run when the locale was en_US.
Tweak the logic of the test filtering to compare the wanted locale
against the system locale both when C is wanted and when it isn't.
Make the skip-messages a little more informative.
Pick-to: 6.2 6.1
Change-Id: I4e072e12819144b2941b87a5f486534047d9a579
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To retain backwards compatibility with some QNetworkReply usage,
namely connecting solely to finished-signal and allocating a buffer to
read into, but without storing the entire decompressed file in memory
until read, we may decompress the file twice.
With this patch users can now avoid this double decompression if the
amount of buffered data stays below 10 MiB. This means any file smaller
than 10 MiB will never need to be decompressed twice to know the size of
it. On top of that, if the data is handled as it arrives (e.g. in
readyRead) and the buffer is kept below 10 MiB it won't need to
decompress twice either.
This is active as long as "countDecompressed" is true, though it
currently always is in QNetworkAccessManger, with a future goal to make
it possible to control with public API. Since it requires the user to
potentially adapt their usage of QNetworkReply.
In this patch we also stop tracking the amount of unhandled uncompressed
bytes (uncompressedBytes) in favor of tracking the total amount of bytes
which has been read() by the user of QDecompressHelper (totalBytesRead),
since we can more intuitively work out the total amount of unread bytes
using this value.
Change-Id: Ie3d8d6e39a18343fcf9b610f45c7fe7e4cd4e474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We try our best to pass on the file location of a failure, including for
fatal errors, but the reporting or logging machinery should not assume
there is one.
By passing on nullptr for the file location we allow the logging backends
to decide how to handle the situation, e.g. by not emitting extra fields
for failure location.
This effectively reverts c25687fa0b,
in favor of relying on the backends to cope with null filename,
which they already did.
As qFatal uses QMessageLogger, which by default disables file/line
information in release builds, we need to explicitly enable this in
our self-tests, to get uniform test results. Similarly, we disable
file/line info from testlib itself, as reporting Qt internal file
and line information for user diagnostics is less useful. The odd
one out there is qtestdata.cpp, which still ends up in test output
due to using QTEST_ASSERT instead of qFatal for its diagnostics.
Cleaning up that, and unifying how we report testlib issues to the
user, is left for another day.
Pick-to: 6.2
Change-Id: Ib9451b8eed86fe3ade4a4dcaf0037e1a3450321c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows up on commit 98666c8afc,
which did the same for QString. If someone wants to get formatting
suitable to an unsigned value, they can cast the value to that
unsigned type and the correct overload shall pick it up.
[ChangeLog][Important Behavior Changes] QByteArray's formatting of
negative whole numbers to bases other than ten now, like QString's
(since Qt 6.0), formats the absolute value and prepends a minus sign.
Task-number: QTBUG-53706
Pick-to: 6.2
Change-Id: I91fee23d25ac0d5d5bcfcbeccbac1386627c004a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One is a bad application or library in this case, but nonetheless
we should handle this more gracefully then just crashing due to
the QRhi already having been destroyed. Mainly because in Qt 5 one
could get away with the same: releasing OpenGL objects underneath,
for example, a QSGPlainTexture with no (or wrong) GL context did
not generate any user visible fatal errors. So we should not crash
in Qt 6 either with these code bases.
In debug builds or when QT_RHI_LEAK_CHECK is set, one will get the
unreleased resources warning printed in Qt 6, which is a step
forward compared to Qt 5. So there is still some indication that
something is badly designed, even if the application survives.
Task-number: QTBUG-95394
Pick-to: 6.2
Change-Id: I944f4f425ff126e7363a82aff926b280ccf1dfc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This signal is emitted by the QIODevice itself, so we don't have to
forward it from the internal socket.
Pick-to: 6.1 6.2
Change-Id: I85745f36d7a27d92f339a9184de3b6e5d46f6f34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Remove the QString/QStringView/QLatin1String/const char* overloads
from the API, but not the ABI.
As a drive-by, replace a use of QStringView::left() by truncate(), as
suggested by a comment.
[ChangeLog][QtCore][QUuid] The from-string constructor and the
fromString() function now take QAnyStringView (was: overload set with
a subset of QString, QByteArray, const char*, QLatin1String,
QStringView each).
Change-Id: If7fa26cfbef9280480c78b669d9f5f14118995ed
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Formatting using scientific notation with extra precision wasn't tested
Change-Id: I7a89a0f3d6468515604e43e52fc366dedf3c39ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For historical reasons a few of the subtests are skipped when
running with anything but the plain text logger to stdout.
To ensure we have as broad test coverage as possible for the
expected output of the various loggers we run these tests in
stdout-mode.
Pick-to: 6.2
Change-Id: I856905d1543afe89710533657a55bd599c0305fd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The JUnit reporter was initially named xunit, but the naming was inaccurate
and the reporter was renamed in 27db9e458c.
The corresponding test has now been renamed as well, and as an added bonus
we only run it for that reporter.
Pick-to: 6.2
Change-Id: I59cb7d949514cdf46a0199a53a7a3e39f833207c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: If86ef3d8611a678798b1bcc60a1a4f5598fd2179
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch fixed two bugs in indexOf/lastIndexOf:
1. The lastIndexOf(char, qsizetype) overload was crashing with an empty
QByteArray. It was unconditionally calling lastIndexOfCharHelper()
which assumes that this QBA is not empty. An explicit check for
the empty case is added.
2. The indexOf(QByteArray, qsizetype) overload was behaving incorrectly
while searching for an empty QByteArray. In this case it
unconditionally returned its second parameter (from). However, from
can be negative, or even exceed the size of this QByteArray. This
patch handles this cases properly.
As a drive-by: this patch adjusts the QByteArray::indexOf(char, qsizetype)
and QByteArray::lastIndexOf(char, qsizetype) overloads to match with the
QByteArrayView implementation. This is done to have similar code paths
in both cases and avoid tricky bugs in future.
Ideally we had to adjust the QByteArrayView implementation, but it's
fully inline, so can't be changed without breaking BC.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Iaef2fdc5b99cce6aa342cca2d17544a1ad7ca677
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are few slots whose lambdas are empty; most will at least
capture [this]. But there are a few in Qt examples that do, e.g. []{
qApp->quit(); }. Logging is also an example. So go the extra mile and
optimize for empty functors by inheriting from them as opposed to
storing them in a member variable.
Change-Id: I3904f10db5ebe904ba889d29c08569edd804df3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QString itself can be compiled without QRegularExpression, but
the tests do not check if they are supported or not.
This patch fixes the issue by introducing the proper #ifdef guards.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I797691f78a34d4f78a86af99c78bf06e26e846d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In commit 9bad096c09 I gave
qFuzzyIsNull(qfloat16) a more forgiving threshold, consistent with
qFloatCompare(qfloat16, qfloat16)'s fractional threshold. The selftest
failed to catch two of the tests failing, so fix one of them to use
different values, and remove one.
Updated test expection for txt and deleted for other formats, as
they're skipped (in tst_selftests.cpp) for this test. Refined the
generator script to know about this test only being tested for txt.
Pick-to: 6.2
Change-Id: I109547cf92178bb9f5ff0b06e0b3bb40c881b41b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
C++20 deprecated compound volatile statements such as pre- and
post-increments, to stress that they're not atomic. So instead of
volatile i;
~~~~;
++i;
you're now supposed to write
volatile i;
~~~~;
int j = i; // volatile load
++j;
i = j; // volatile store
which matches more closely what hardware does.
Instead of fixing every use of volatile pre- or post-increment in this
fashion individually, and realising that probably a few more Qt
modules will have the same kind of code patterns in them, write
QtPrivate functions to do the job centrally.
Change-Id: I838097bd484ef2118c071726963f103c080d2ba5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before this change, next() was the only way to advance the iterator,
whether the caller was ultimately interested in just the filePath()
(good) or not (bad luck, had to call .fileInfo()).
Add a new function, nextFileInfo(), with returns fileInfo() instead.
Incidentally, the returned object has already been constructed as part
of advance()ing the iterator, so the new function is faster than
next() even if the result is ignored, because we're not calculating a
QString result the caller may not be interested in.
Use the new function around the code.
Fix a couple of cases of next(); fileInfo().filePath() (just use
next()'s return value) as a drive-by.
[ChangeLog][QtCore][QDirIterator] Added nextFileInfo(), which is like
next(), but returns fileInfo() instead of filePath().
Change-Id: I601220575961169b44139fc55b9eae6c3197afb4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The number(double) testing done in tst_qstring was a bit lacking,
so other tests (like tst_uic) had to be run to properly test changes.
Task-number: QTBUG-88484
Change-Id: I2fc6cba27788ab4fab6d625257f35868e2b684e3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We missed the chance of deprecating them in 5.15, so
they'll just add to the pain of porting to 6.0. We
should not keep them around forever, though; QMap isn't
random access and so its iterators should only have
bidirectional APIs.
Pick-to: 6.2
Fixes: QTBUG-95334
Change-Id: I3577f7d25e8ab793722d2f220fd27bc85c622b0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QHash::squeeze() was unconditionally calling reserve(0), which is
always allocating memory (even for 0 size).
This was leading to a confusing situation when calling squeeze() on
a default-constructed container with 0 capacity() actually allocated
memory. This is very misleading, as squeeze() is supposed to free
unneeded memory, not to allocate more.
This patch adds a check for non-zero capacity. As a result, nothing
is done for default-constructed container.
Note that this patch also affects the QSet::squeeze() behavior, because
QSet uses QHash as its underlying data type.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib1c3c8b7b3de6ddeefea0e70b1ec71803e8fd3b3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
When inserting items into the result store, a ResultItem is created,
which stores a pointer to the results list and their size. If the size
of the ResultItem is set to 0, it means that a single result is stored.
In case of trying to report results via an empty list, the size is 0, so
result store treats it as a single result.
Added checks before storing the results to make sure that the result
list isn't empty. Note that empty lists are allowed in some cases for
the filter mode, because ResultStoreBase::addResults() knows how to
handle those cases correctly.
Task-number: QTBUG-80957
Pick-to: 5.15 6.1 6.2
Change-Id: I399af4c3eef6adf82fea5df031fe9a9075006b1f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit c19695ab95.
Just because QSet has limited API doesn't mean we can't provide this
in an efficient way for std::unordered_set :P
Added tests.
Pick-to: 6.2
Change-Id: I4f8f0e60c810acdc666cf34f929845227ed87f3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This introduces a new attribute that allows behavior to keep
the TCP connection(s) to a HTTP1/HTTP2 host longer or shorter
than the default of 120 seconds.
Note that the server might still close the connection earlier.
Fixes: QTBUG-20726
Fixes: QTBUG-91440
Change-Id: I7da64230a78c642c12c0ddbe6b678cf17c3aafde
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In two cases, it was as easy as replacing an unnamed enum's values
with constexpr variables. In the case of QSimplex, I opted for
qToUnderlying(), as the enum made sense on its own.
Change-Id: Ifcf5be14bd2f35e50adabdbd7ecdb2e83f6bf5b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed container.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Icc1f1342738603c9bed065b2a36c72ea60b48962
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This mechanism was neither properly designed nor correctly tested
initially on Windows.
[ChangeLog][QtNetwork][Important Behavior Changes] QLocalSocket on
Windows now implements delayed closing, which is consistent with
the behavior on Unix.
Change-Id: Ic3bc427e68eea7f18201f6129df19fbc87d68101
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It's the user's privilege to do so when they want to finish reading the
QIODevice. Moreover, this is the only difference between close() and
disconnectFromServer().
[ChangeLog][QtNetwork][Important Behavior Changes] The Windows
implementation of QLocalSocket::disconnectFromServer() no longer calls
close(), which is consistent with the behavior on Unix.
Change-Id: Ie9ce20c60259a2b08f5254b719355bd7be9b17cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In the case where we have pending data to write, calling flush() here
may cause the device to close immediately, if the pipe writer already
got a result of the last operation from the thread pool. In this
scenario, the device does not enter the 'Closing' state, which leads
the following code to unexpectedly fail on Windows
socket.write(...);
socket.disconnectFromServer();
QVERIFY(socket.waitForDisconnected());
Removing the call to flush() makes the behavior consistent with the
implementation on Unix.
Change-Id: Ic31fbc999be979c1e5befa8f132d9fb367f472ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
According to the documentation, calling abort() should immediately
reset the socket to its initial state. This includes:
- closing the file descriptor;
- closing the QLocalSocket as an I/O device;
- canceling a pending outgoing connection, if it exist;
- reseting 'serverName' string.
So, adding a call to close() resets the state entirely.
Pick-to: 6.1 6.2
Change-Id: I9c604b5187c6300b437d7aa4c2d06db03edacf21
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The plan for QObject::connect() (perfect) forwarders, such as
QWidget::addAction(), was to just use a variant of the Detection Idiom
to see whether QObject::connect() with the arguments as given would
compile and SFINAE out the forwarder otherwise.
It turns out that the "functor" overload of QObject::connect(), in
particular, is severly underconstrained and accepts e.g. QKeySequence
as a function object, only erroring out via a static_assert() in the
body of the function, and thus at instantiation time and not, as
needed, at overload resolution time.
At the same time, we don't really want QObject::connect() to SFINAE
out on argument mismatches between signal and slot, because the
resulting error messages would be ... unkind to users of the API. We
would like to keep the static_assert()s for easier error reporting.
Reconciling these two contradicting requirements has so far eluded
this author, so for now, to unblock progress, we explicitly black-
and, in one case, white-list possible arguments. Because QKeySequence,
in particular, is implicitly constructible from int(!), and therefore
any enum type(!), incl. Qt::ConnectionType, we need to do way too much
coding in the addAction() constraints. Hopefully, we'll be able to fix
the issue at the root cause, in QObject, before Qt 6.3 is out, but
until then, this is an ok-ish stop-gap measure.
Add thorough overload set checks (positive ones only, for now) to
tst_qwidget and tst_qmenu.
Change-Id: Ia05233df818bc82ecc924fc44c1b349af41cbbf1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
All the getters of QFutureWatcher are consistent with the getters of the
corresponding QFuture, except for the isFinished() method, which returns
'true' only after the finished() signal is delivered. This behavior
might be unintuitive for the users. In particular, isFinished() returns
'false', even if it's called immediately after waitForFinished().
[ChangeLog][QtCore][QFutureWatcher][Important Behavior Changes] The
QFutureWatcher::isFinished() method now indicates if the related
QFuture is finished, instead of indicating if the finished() signal was
delivered. This makes it consistent with the future that is being
watched.
Fixes: QTBUG-91048
Pick-to: 6.1 6.2
Change-Id: I6ae9b882b23e06198a82c95b026491bd480b3bf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QAbstractButton::setChecked is not virtual, so QToolButton cannot
override to synchronize the default action's checked state. This resulted
in button and default action not being in sync when the checked state
of the button was changed programmatically, while changing the checked
state on the action kept the button in sync.
Connect to the button's own toggled signal instead to keep the state of
the default action in sync. Make it a unique connection to allow multiple
calls to setDefaultAction, which are used by QToolButton to keep the
button updated if properties of the default action change.
Add a test that confirms that button and action are synchronized both
ways, and that we only get single signal emissions when changing either
programmatically.
Fixes: QTBUG-95255
Pick-to: 6.2 6.1
Change-Id: I0e027faf1da763ef1878e46e85bfa70073c8bf82
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ie57b5d13fad9a846c29c87be4985c87e69bba305
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, some other tests are added to extend code coverage.
As a drive-by:
* fix int -> qsizetype in the test data
* fix int -> enum in the test data
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I159473b7f5dcbea1bdaf2966979e066296351208
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
CMake 3.21.0 + Ninja now pass absolute source file paths to the
compiler which causes __FILE__ to be absolute and qFindTestData
to ignore any QT_TESTCASE_BUILDDIR value.
This causes the test to fail, because it won't find test data in the
custom specified location.
Disable the test for now.
Amends 70464b355e
Pick-to: 6.2
Task-number: QTBUG-95268
Task-number: QTBUG-95018
Change-Id: If99035e897ac1d5f153d4e19c94e4355f88970af
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The MinGW resource compiler fails to handle compile definitions
with multiple values.
When the resource file is compiled as part of the main target rather
than a separate object library, the resource generation rule will
inherit all the compile definitions from the main target.
For the case of tst_selftests this causes errors like
gcc: error: badxml\: No such file or directory
gcc: error: benchlibcallgrind\: No such file or directory
gcc: error: benchlibcounting\: No such file or directory
gcc: error: benchlibeventcounter\: No such file or directory
gcc: error: benchliboptions\: No such file or directory
Limit the compile definition to the C++ language only, so the multiple
values are not passed to the resource compiler.
Pick-to: 6.2
Change-Id: Ie53666839272556323b50d79c090f0dc71745d11
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
While QFileSelector is documented to work on files, select accepts
arbitrary URLs. Moreover, the QML engine can end up intercepting
arbitrary (user provided) URLs, including to directories.
Prior to this change, passing "file:///" or "/" to the function would
break: We would temporarily get a "//" path, which is invalid, and thus
we would return an invalid in the end.
Prevent this by only appending a slash to the path when it doesn't have
one.
Fixes: QTBUG-85410
Pick-to: 6.2
Change-Id: I1d2807a9d225df611c3a5e871e3c1d90a6a25953
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QtConcurrent reduce functions were requiring to explicitly pass the
the result type when passing functors as reductor. This was because of
inability to deduce the result type from the functors. The result type
of the QtConcurrent reduce functions should match with the type of the
fist argument of the operator() when a functor is passed. Reused the
ArgResolver type trait (already used for QFuture and QtConcurrent::run)
to find out the result type in that case.
Task-number: QTBUG-88448
Change-Id: Ief0eeee197df8cb9c30f3403d71978f36e4fb0f2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
These signals allow monitoring where in the HTTP1/HTTP2
flow a request is currently in.
Fixes: QTBUG-71698
Fixes: QTBUG-18766
Change-Id: Icc2fe435afc9f680fa7a76c32731e25fcdfeb4b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The server's socket may not have been created yet, so use the server's signal
instead.
Switch to QCOMPARE to get better output.
Delete the extra checking for schannel, we don't support Windows 8 anymore.
Pick-to: 6.2
Change-Id: Icd310c32939cb577c9f3438789f667aa0a3a4d85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the file already existed we simply removed the old one without
adjusting the size. So use the removeFile() function which takes care of
that.
Additionally, if the current size was non-null we previously increased
the size (presumably meant to be temporarily but wasn't) and called
expire() which would either:
1. not do anything and return currentCacheSize, if it was not greater
than the max size. This would mean that the size of the file would be
counted twice.
or,
2. discard currentCacheSize, measure the size of the items, and then
remove some items if the total size surpassed the max cache size
Neither of those branches need us to (temporarily) increase
currentCacheSize. It also doesn't attain the (presumed) goal of trying
to keep below the max cache size after having added the new item.
Fixes: QTBUG-95009
Pick-to: 6.2 6.1 5.15
Change-Id: I2b5b13ff473a7aa8169cf2aecfea783c97f2d09a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
