Qt Windows Extras is a new add-on for Qt 5.2.
To make the link work, also added qtwinextras to the
doc configuration file.
Change-Id: Ib7d117908c241812c200ec701b6f2be27fe893c6
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
sync up with qt creator - for qmake itself, this is just a minor
refactoring.
Change-Id: I833253f81c3159056fab2ff888f293b36cc2ef56
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/66802ef8bf7989dc025e34bf91d93576189c483c)
(cherry picked from qtcreator/69542826fa643a0fed2fc9e717f072c2852dc017)
(cherry picked from qtcreator/196424115338fb9a535810704b7d814d318b0462)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
it's not necessary to immediately re-calculate the roots after assigning
QMAKE_PLATFORM - it's sufficient to do it on-demand, so merely
invalidate them. this avoids that we re-calculate them multiple times
without ever using them in between while processing specs with
distributed platform assignments.
Change-Id: If508594764811b96a577fc81c5ded34ab0453148
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
(cherry picked from qtcreator/28df27d924bb407791a76de8159c9ffa6efde283)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
looking up the same files in the same locations over and over again
is a rather significant waste. in particular, looking up the CONFIG
flags that don't correspond with features has a measurable impact on qt
creator's project loading time.
Task-number: QTCREATORBUG-9154
Change-Id: Ibae3d8b7797e706a6416a7d45c77734ab1281b51
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/fa27cd79e05aed4ebd16d5648480cc7d48fefd43)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
just directly use the filename we constructed it from.
Change-Id: Ia428a2cb4b192fea6bde62dfbf35361bcfc4b21e
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/571234786a3ff7e8e3a9220f12d22a9f74f7a53c)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
contrary to what one may expect, it's actually *not* supposed to remove
the meta-characters it interprets.
luckily, this function is not used much any more ...
Task-number: QTBUG-31877
Change-Id: I2b60f9b173140da78db2b07b596cc2e5f6e6d555
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We were only fixing QMAKE_C/CXXFLAGS, not the defines we then appended.
Change-Id: Iaa4a394738658c45aae83941ebe54470d6d8e250
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If both the rc_file and res_file was added to the project then in MSVC
2012 it would cause an error complaining of a duplicated resource.
Task-number: QTBUG-29826
Change-Id: Ib3401b423208cd8c90895038c9cbadd80c39b542
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The POSIX function uname() can return any non-negative value for success.
- Example: Solaris 10 returns 1 on success.
See: http://pubs.opengroup.org/onlinepubs/009695399/functions/uname.html
Change-Id: Ic3d51f94a31d8b562b28a2d09df3d31b04c77dc8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as of qttools/18a5e89623815f5355b4173a2e93609eb10289d1
Change-Id: I75cb55e0c404449a4e0d963e09185287a3f6343e
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
this avoids that an empty rebuild after a complete build re-runs qmake
everywhere again.
according to 1f83f0cf2a this is the behavior i originally intended,
but somehow it got lost when switching to the new interpreter.
Change-Id: Id5158d7e272fdee4f4a041fb7c828295a0a86684
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is for shadow builds during build time, where the respective files
are expected in the source dir.
Change-Id: I18dcfbdef99e1562a51dacac333642cae8105ebd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these files function as "anchors" for mkspecs/ and features/ directories
used by projects which load these files. ironically, these files didn't
see these feature files themselves.
Change-Id: I590855eb4a9d2c72b9abfcaa431d2f85a719c6e2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were finding features/ directly in the source & build root, and we
were finding features/ under mkspecs/ from $QMAKEPATH and other mkspecs
locations, but we omitted the "transitive hull". this was
counterintuitive.
Change-Id: I9823e6606467c98f264c81385250da92311f51ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with qtcreator.
Change-Id: I6a1578818512fa3b0773faf276a1d56881eb06d7
(cherry picked from qttools/582cbddc6ba1b74a7e4e07e0b5c23d47de6838cb)
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
sync up implementation with lupdate & creator. no actual effect on
qmake.
don't filter out ^QMAKE_.*:
- QMAKE_MKSPECS is not printed any more, so needs no filtering
- QMAKE_VERSION can be simply used now, as we are now rather close to the
real qmake
- QMAKE_SPEC and QMAKE_XSPEC need to be fetched
- this fixes the default spec resolution
Change-Id: Ifcfa8b5b9e2bbf5d995940e1bb7f55e7d67aed3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/0037bef09ca77c5ae4d20bd09294ba1d57537e09)
sync up implementation with lupdate & creator. no actual effect on
qmake.
Change-Id: I1bdeb759e895e4200f09332dadf8a6cef348182f
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qttools/94ab2efb2d155d3c1ca7b91c1daf443a149bcf1f)
