Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This only updates data on languages already present in 5.12; once it
has merged up to dev, the scripts need to be run again to pick up a
few more languages and possibly add any more new languages present in
v34. Change some tests to match changes in en_AU's abbreviated day
and month names.
[ChangeLog][ThirdParty][CLDR] Update locale data to CLDR v34.
Task-number: QTBUG-71144
Change-Id: I68402b5e7e9d3dba669b8ba31b9a8abd86675c6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTableWidget::isItemSelected/setItemSelected() are deprecated for a
long time but not marked as such. Therefore explicitly mark them as
deprecated so they can get removed with Qt6.
Change-Id: I77fffe2786751306115c3f5da0ef98ff84e35b1a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView/TableView::sortByColumn(int) was deprecated a long time ago
but never got removed. Therefore mark it with QT_DEPRECATED_SINCE(5, 13)
so we can remove it with Qt6.
Also sync the handling of the sort order changes in QTableView with the
one from QTreeView.
Change-Id: I0371d9a9c21116edaa9125835827f1a200075d36
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QTreeView only had functions to either expand all items or until a given
depth. What was missing is to expand all subitems for an index
programmatically which is added with this patch.
[ChangeLog][QtWidgets][QTreeView] Added expandRecursively() to expand
all items below a given index
Fixes: QTBUG-10482
Change-Id: I8fc4d50b0b7e90245840c99a0188f13c0670253a
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Qt stylesheets color property did not support hsl or hsla although
CSS 2.1 does support it. Since QColor natively supports this color model
only the color parsing needed to be adjusted.
This also adds some stricter checks for a valid css color definition and
prints a warning about the issue.
[ChangeLog][QtGui][CSS] Added support for hsl/hsla colors
Fixes: QTBUG-58804
Change-Id: Ief65a36a7e0ed0d705dc1fe5a8658e8d07fe9a13
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Only QGuiApplication would emit the signal. Untangling the duplicate
code is rather non-trivial, so left alone for now.
Fixes: QTBUG-71186
Change-Id: I4021e3b9ff39718562f4fa3a03c092436b559e9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QPlainTextEdit.
[ChangeLog][QtWidgets][QPlainTextEdit] Added QRegularExpression find()
method overload.
Change-Id: Id156971d3fa0372712bfa8b72a55550942a767e0
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds the missing overload for QRegularExpression to match the
QRegExp one for QTextEdit.
[ChangeLog][QtWidgets][QTextEdit] Added QRegularExpression find() method
overload.
Change-Id: Ic7be224dcc59fc8d832daddd1999a713b7f04253
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
52f1692b84 introduced a possible fix for
this flaky test. Therefore unblacklist them to see if the change really
fixed the issue.
Task-number: QTBUG-64639
Change-Id: I759d66aac7641505487e88254d16750e87c97350
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTable/QTreeView did not follow the documentation and returned
their needed size with scrollbars within viewportSizeHint().
Then sizeHint() also took the size of the scrollbars into account
when the policy was set to ScrollBarAlwaysOn.
This lead to different results when the widget was shown/hidden and/or
the scrollbar was visible or not.
Fix it by only adding the additional size when the scrollbars are
really visible. Also use header->isHidden() instead of isVisible() in
QTreeView the same way it is done in QTableView.
[ChangeLog][QtWidgets][QAbstractScrollArea] QTableView/QTreeView are
now reporting their viewportSizeHint() correctly taking into account
its scroll bars visibility and visibilityPolicy.
Task-number: QTBUG-69120
Change-Id: If50959a9f7429275e3e33122644c978fb64972ba
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The matatype should not keep manually maintained list of stream
operators. The patch adds automatic detection for all builtin types
so load and save functions pick the right delegate automatically.
This change exposed some existing anomalies:
- char is enforced to be signed while it seems that just calling
the operator directly does not have that feature.
- [unsigned] long type is always upgraded to [unsigned] long long
- QCborSimpleType doesn't have the data stream operators while
metatype is able to stream it through casting
Change-Id: I51178d6acd97d0585a6089e30ddd6acb2a29af54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, the rects will pile up when the item is not part of a view.
Task-number: QTBUG-54275
Change-Id: I29c989e25ce0ca1ac0b87d0388a476ef1acd9cfd
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QTreeView has a special implementation of keyboardSearch() which is not
consistent to the base implementation regarding the selection behavior:
- currentSelectionStartIndex is not set which results in a wrong
mouse selection behavior afterwards
- only the current index is set but not the current selection
Sync the behavior by calling setCurrentIndex() directly in QTreeView
too.
One problem remains with this patch - the key handling is still
different between QAbstractItemView and QTreeView for repeating key
presses.
Task-number: QTBUG-18862
Change-Id: Ife79d146cf16d6ecbf9f86540777dae15aa1ffb0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
As the test was unstable, we qskip the failing parts
instead of mark the whole test insignificant.
Task-number: QTBUG-50842
Change-Id: Ib8f5b7ead07d65cc624fa72b190ecee0338c8183
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Instead iterating through all rows to get the number of hidden items,
iterate over the hidden items which are fewer items.
Also don't create a temporary vector with visible flow positions by
remembering the count of hidden items before the working index and
adjusting them appropriately which gives a significant performance
boost when working with a large data set.
[ChangeLog][QtWidgets][QListWidget] Speedup handling of hidden items
when working with large data sets
Task-number: QTBUG-68977
Change-Id: I599b6e97945c245f02229145baad8363ec2bf2f5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
tst_QMdiSubWindow::setOpaqueResizeAndMove checks if a resize of the mdi
subwindow works as expected by simulating mouse events. Those events are
sent to fast and therefore the operationMap of QMdiSubWindowPrivate is
not yet updated which let the test fail. There was already a call to
qWait(250) to wait for the 200ms timer but sometimes (esp. in virtual
environments) the timer was not triggered after this period.
Fix it by checking if resizeTimerId is set back to -1 which means that
updateDirtyRegions() was called.
Change-Id: I961ba80589d2f725a6858ba70b84fb35750a6964
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
tst_QItemView::indexAt() was disabled since Qt 5.0 (and maybe earlier)
maybe due to it's long runtime (15s on my machine).
Speed it up by checking only some special positions inside the visual
rect (borders, center) as it will likely not fail on other positions but
succeed for the ones which get tested.
Task-number: QTBUG-22470
Change-Id: I5c7135757049176f9daca4afc1b7f40c75b9ecd9
Reviewed-by: David Faure <david.faure@kdab.com>
When the first row(s) of a QTableView is hidden, PageUp could not reach
the first visible row because logicalRow(0) is taken without checking
if the row is visible.
Task-number: QTBUG-70215
Change-Id: Ic7820352b8988accb685ea7d16908d3fa8bf2847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Implemented the virtual method moveRows to allow row movement.
[ChangeLog][QtWidgets][QListWidget] Implemented moveRows in model
Task-number: QTBUG-69807
Change-Id: I212b560b8778306a0315d9d5e4710efcc7dbbe44
Reviewed-by: David Faure <david.faure@kdab.com>
A virtual method clearItemData was added to QAIM for Qt6.
This patch implements that method to all Qt concrete models for which
it makes sense.
Task-number: QTBUG-69616
Change-Id: If980fcfc36f723128bc56ec4587c5c3a338dbbcc
Reviewed-by: David Faure <david.faure@kdab.com>
This is marked to be removed in Qt6, so switch to
SE_ItemViewItemCheckIndicator internally and define the old value as
copy of the new one instead of the other way round.
Change-Id: I9e9804a7ff0e9b2ae1e24698d45b2cbd44423420
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For ControlType != QSizePolicy::DefaultType, qCountTrailingZeroBits()
is used which, MSVC 15.8.1 does not consider constexpr due to built-ins.
Exclude the check by #ifdef.
Task-number: QTBUG-69983
Change-Id: Ifc3dc3d94a804246bee1705fc8f3ac9b04ee4d32
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test had some shortcomings:
- Flakyness due to not waiting for the file dialog list
to be populated.
- It assumed that the hardcoded directory name
____aaaa... always would show first in the list. This may
not be true on Windows, where names like .designer show above.
- On failure, the test directory would leak.
This manifested in failures like:
FAIL! : tst_QFiledialog::clearLineEdit() '(fd.directory().absolutePath() != QDir::home().absolutePath())' returned FALSE. ()
To fix this, use QTemporaryDir and introduce predicates that
can be used to check whether the dialog has been populated
and the right file/directory is selected by pressing cursor down.
Use the temporary directory as not to pollute the home directory.
Change-Id: Ic504b91325993dcd6099c99e125e7ed8ff1d7672
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
Under certain circumstances, if you had a widget with a QOpenGLPaintEngine,
and drew QStaticText into this, and then later had Qt Quick access the same
cache and try to resize it, we would get a crash because the resize function
would have a pointer to the paint engine and try to access its shader manager
(which would now be null, since this is outside the begin()/end() phase of the
paint engine.
The solution is to reset the paint engine pointer to null on the cache once it
has been populated and it is no longer needed.
[ChangeLog][QtGui][Text] Fixed a possible crash when combining QStaticText,
QOpenGLWidget and Qt Quick in the same application.
Task-number: QTBUG-70096
Change-Id: I7383ad7456d1a72499cfcd2da09a5a808d4b3eff
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fails on previous 42.3 and also 15.0. Just covering "opensuse" saves
us from new commits every time we upgrade our openSUSE. We have a bug
open of it after all.
Task-number: QTBUG-51399
Change-Id: I5c0869daea41b1886faba3d0caaa0804a3705d54
Reviewed-by: Liang Qi <liang.qi@qt.io>
Frameless obscured windows do not receive WM_PAINT/expose events on
Windows. Qt::WA_Mapped needs to be set on them to ensure updating works.
Task-number: QTBUG-39220
Task-number: QTBUG-52039
Task-number: QTBUG-58575
Task-number: QTBUG-63927
Change-Id: Ic6c11f2be96378b6a6b61296f1f3e13cd49b50a6
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
I've tried to reproduce the failures in the CI a couple of times now,
but it keeps passing. Let's leave some debug output in the test so
that if/when it does fail, we might know a bit more about why it does
so.
Task-number: QTBUG-69492
Change-Id: I5b39ac692e9026ce4b25cd13d342b11e061b777b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Nathan Collins <nathan.collins@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QMessageBox window ignores QCloseEvent if it was created
with Ok button and the detailed text was set. But it can
be closed if it contains only one button.
Make it closable if there are two buttons and one of them
is the "Show Details..." button.
[ChangeLog][QtWidgets][QMessageBox] A message box with two
buttons, one of which is the "Show Details..." button,
can be closed by clicking the X button on the window's
title bar.
Task-number: QTBUG-69526
Change-Id: Iba09e38561eb3898dc2aecfd38d8519d512a71c1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The QTRY_VERIFY was needed because the window doesn't initially have a handle,
and QTest::qWaitForWindowActive(QWidget *) only checks the active state of the
widget if it does, returning false if not.
This broken logic should be fixed, but for now let's make it clear what's
actually going on by using an explicit wait for the window handle.
Change-Id: I6dd89e0894efed14f4b9a2562dfe8ca76b5ef89c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test was un-blacklisted in 4050ee6ac7
but apparently it is still not stable.
Task-number: QTBUG-69666
Change-Id: Iaf933ee27d54ebbfa52d0a8d7b1def0ca91808e7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's useful to know how many times the signal was emitted, because it
gives us insight into why the test may have failed, especially when
it's difficult to reproduce.
Task-number: QTBUG-69492
Change-Id: I94796ed880512b060e0a724c87edde8c3b91bb7c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests could change this property, and since the majority of the tests
share testWidget instead of creating local instances, we should be
thorough when cleaning up.
Change-Id: I6039fb6857f4f788f809b1d1fd491b4ef34923ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The majority of the test reuses testWidget. While this may be faster
than creating a QDateTimeEdit instance on the stack for each test,
it introduces issues when certain properties aren't unset when cleaning
up. This happens easily when new tests are introduced which rely on
certain properties, for example.
Rather than making the newly introduced step-modifier-related tests
use testWidget, this patch goes with the simpler option of hiding
testWidget, just like other tests currently do.
Eventually we should probably switch to using local instances
everywhere.
Task-number: QTBUG-69492
Change-Id: I4d5625be0b7c72db793346f43fe3a7e7c1241f13
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By making the test independent of fixed top level widget sizes, it can
also be run on platforms, that do not support this feature.
Task-number: QTBUG-68297
Change-Id: I6945d259801360a9819b9b631d0a7497d3d27a9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The min/max section size was not checked when setting the default
section size. This was an oversight when the check for min/max section
size was added to resizeSection().
[ChangeLog][QtWidgets][QHeaderView] setDefaultSectionSize() now
checks if the given value is inside min/max section size
Task-number: QTBUG-69431
Change-Id: I1b5704282927ce5a8520f52174ebf91d9840bc8a
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Visual Studio complained about the usage of a potentially uninitialized
variable which made compilation fail.
Change-Id: I0bc9d1e47d3b00b047912164c3bc4197a2058f85
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-68864
Change-Id: I799defcec3a41d86a604bfcd4c2e1081ae4e0e53
Reviewed-by: Simo Fält <simo.falt@qt.io>
Wrong test was blacklisted for this commit.
This reverts commit 85607bd70d.
Change-Id: Ica5272799afec88c05e2cd137835bcdcb587836e
Reviewed-by: Simo Fält <simo.falt@qt.io>
It might have been fixed in the three years since it was marked
insignificant, and we can't investigate the crash while it's not
tested.
Task-number: QTBUG-50747
Change-Id: I99cdeb55e207d10fe524cd5f4868f042c64eb7d3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CSS geometry constraints such as "min-height" or "min-width"
will set size constraints on the widget.
Removing the stylesheet should remove these constraints.
Task-Id: QTBUG-69418
Change-Id: I1008e4390281c90112303d72dd7d59a8acddfcd9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixing some issues that could cause intermittent or environment-dependent
failures. One kind regards the use of multiple QTest::mouseMove()
calls in sequence internally using the QCursor API, causing timing
dependent failures. Switching to the override that does not require the
QCursor API, where possible. Other test could fail depending on the size
of the screen.
Change-Id: I4a368955ddbb48f729dcdf74c20eb163329936b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This patch allows the developer to pick which keyboard modifier
increases the number of steps a QAbstractSpinBox takes when the user
interacts with it.
The modifier can be either Qt::ControlModifier (default),
Qt::ShiftModifier or Qt::NoModifier. Qt::NoModifier disables the step
modifier. Note that on macOS, Control corresponds to the Command key.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QStyle] QStyle::SH_SpinBox_StepModifier allows
the developer to pick which keyboard modifier increases the number of
steps a QAbstractSpinBox takes for the following interactions:
scrolling, up/down keyboard keys and the spin box buttons. The
Qt::ShiftModifier can now be used, or the feature can be disabled
using Qt::NoModifier. Previously, only Qt::ControlModifier could be
used as the modifier.
Change-Id: Ib5518127e86a8f67798a9a1d6e860c6e35896e6f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
... and various other cleanups.
This patch re-factors tests that relied on QCursor API (directly or indirectly via
QTest::mouseMove widget overload) to use the QTEST_QPA_MOUSE_HANDLING code path.
Misuse of QCursor API causes tests to be flaky.
Removed Qt::X11BypassWindowManagerHint as it is not really needed. Based on
the comment where this flag is used, it would be needed for all test functions
that use mouse events. That assumption is not valid. A window is expected to have
received its final position when QTest::qWaitForWindowActive() returns. There were
issues with this on Unity, but those have been fixed.
Un-QSKIP-ed QTBUG_6986_sendMouseEventToAlienWidget for Q_OS_WIN.
Un-QSKIP-ed hoverEnterLeaveEvent for all platforms.
Un-QSKIP-ed bypassGraphicsProxyWidget for Q_OS_MAC and Q_OS_WIN as the test
passes on those platforms. According to QTBUG-33067 it used to crash with 5.2.0.
Removed unnecessary mouseMove() and stray mouseRelease() in mouseDoubleClickEvent().
Removed unnecessary show()/setVisible() on items that are being added to the scene -
items are visible by default.
Among other randomly spotted issues, one worth mentioning is that when adding
items to the scene after the view is already shown, we need to ensure that the scene
is updated (e.g QSignalSpy + QGraphicsScene::changed) before interacting with it. As
an example, mousePressReleaseEvent() only passed because of random luck that the
invalid coordinates were still within the bounding rect of the button. This patch
does not attempt to cleanup all instances of this anti-pattern.
Task-number: QTBUG-52546
Task-number: QTBUG-26948
Task-number: QTBUG-33067
Change-Id: I2ccbc004c1cb4f5b31c70c8568ee591c458d8446
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Makes sure the tests are skipped on Wayland.
Task-number: QTBUG-62188
Change-Id: Ia50d6cc02fbbac0fb6b77a16eb6372c1adb422d8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Input value which is over the highest acceptable value, but consisting
of a number of digits equal to or less than the max value should be
considered intermediate.
[ChangeLog][QtGui][QIntValidator] Input value with over the highest
acceptable value, but with equal or less amount of digits than the maximum
value is now considered intermediate.
Task-number: QTBUG-59650
Change-Id: I71a77c9c266f0f3b62c71ac6cb995019385c1cf5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test and its helper were removed some time ago.
Change-Id: Id82a2a1bf829f272e9c1447e697935934c923092
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I017b501506c54c4b89773d2b949c097598bc7049
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QTableView::doItemsLayout() updated the scroll offset for the vertical
header after layouting was done. Since the scroll offset affects the
viewport of the editors, the adjustment was done too late.
Therefore we update the scroll offset right after the scrollbars are
set inside QTableView::updateGeometries()
[ChangeLog][QtWidgets][QTableView] Fixed calculating geometries
for editors
Task-number: QTBUG-48244
Task-number: QTBUG-49548
Change-Id: I3b057764cf99d42d861928a1c73277d34b440f9a
Reviewed-by: David Faure <david.faure@kdab.com>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The original code was added by b316c3ac5e
(in 2012). This patch changes two things:
1) We now rely on WM to position a window based on the set gravity. It
should not be necessary to calculate coordinates manually as was done
in windowToWmGeometry(). We don't even know the decoration size before
the window is mapped.
2) We now update gravity whenever needed instead of hardcoding based
on what Qt APIs (setGeometry vs setFramePosition) where used to set
the initial window position.
The patch from b316c3a says:
"Determine gravity from initial position. Do not change later as
it will cause the window to move uncontrollably"
Since it did not elaborate on the situation, we can only assume
that it was caused by another bug in Qt at the time or perhaps
a broken WM. From [1]:
"Applications are free to change their win_gravity setting at any
time. If an Application changes its win_gravity then the Window Manager
should adjust the reference point, so that the client window will
not move as the result."
Tested on Ubuntu/Unity, KDE/KWin, Gnome-shell/Mutter, Lubuntu/OpenBox.
Works as expected everywhere expect Unity. Unity seems to ignore
XCB_GRAVITY_STATIC and treats it as XCB_GRAVITY_NORTH_WEST, which means
that setGeometry/setFramePosition produce the same placement on this WM
(the behavior was the same also before this patch).
P.S. Also renamed xRect -> rect, which was a leftover from
ae5f2a6672
With this change we can un-blacklist QWidget save/restore geometry
auto tests.
[1] https://specifications.freedesktop.org/wm-spec/latest/ar01s09.html
Task-number: QTBUG-66708
Change-Id: I381eef5d34dddb04de16a897ce5540b9c430b216
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: I86640b22c9e7a258965805a661e1e8c3ead8d012
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: Ia7fda4c42d4aeaecd4485d18383cf46bf6af63d1
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as specified in the documentation. This was a regression from Qt4
and can cause mouse cursor flickering durig dragging on e.g. custom
widget where some areas of the widget do not accept drag-and-drop.
Task-number: QTBUG-67155
Change-Id: Iaa6f9407181931ed8e3d6a8fec13fd59d3c8625d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This was a regression from Qt4 and also is the documented behavior.
In addition this patch fixes various issues with cursor shape updating
that were discovered along the way and that are necessary for testing
the new changes.
The code in QGuiApplicationPrivate::processDrag() also needed a fixup,
particularly the resetting of QGuiApplicationPrivate::currentDragWindow.
Without this fix we would get DragMove (the one that immediately follows
the DragEnter) only for the first DragEnter event. For example when dnd
starts on mouse press then for mouse click we would get:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragLeave
but the expected is:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragMove->DragLeave
Task-number: QTBUG-34331
Change-Id: I3cc96c87d1fd5d1342c7f6c9438802ab30076e9e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When an internal DnD occoures in IconMode, the item is moved to it's new
place but the logic in filterStartDrag() has no clue about the fact that
an internal move happend. Therefore the item gets deleted. Fix it by
changing the event's drop action to Qt::CopyAction to avoid the deletion
as it is done within QListWidget DnD code.
[ChangeLog][QtWidgets][QListView] Do not delete item on internal move.
Task-number: QTBUG-67440
Change-Id: I873d3c9fa76e107e108d9af0dcf8cecd1e18a18f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When an item is explicitly hidden, then it should stay that way even if
its parent is reparented. The item itself needs to be explicitly shown
for it to be made visible.
Task-number: QTBUG-54843
Change-Id: I0c6eea9a936f82d5874e3246292bd16365440411
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68865
Change-Id: Ia245f72826be071e5617c417e3d9f50bdcc689a9
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68864
Change-Id: Ib4baa458b80eea5861e89145b85d865e9a78989c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68862
Change-Id: Ib02c28ede135c9ba4303dbf0224b32b080762a31
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It's not possible to ask for window activation on Wayland, and some Wayland
compositors—such as Weston—don't give window focus to newly created window
either.
Task-number: QTBUG-62188
Change-Id: Ibebb2a14e03127fec703d79498627fccf65b2f88
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If there is a parent (typically an itemview) then StatusTip events
should be sent to that. However in the case of there not being a parent
then the event should be sent to the QHeaderView itself.
Task-number: QTBUG-68458
Change-Id: I2a8c11c973210c7adf1bf29443f224f968a357a9
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This property allows to change the default behavior in
which list items occupy the entire width of their column.
Setting it to Qt::{AlignLeft,AlignRight,AlignHCenter} will
reduce their widths to the minimum values, thus allowing to
have intermediate free space. Then the user will be able to
begin selections by mouse from this space.
[ChangeLog][QtWidgets][QListView] Added itemAlignment property.
Task-number: QTBUG-56606
Change-Id: Iae55c251379be4e45d0c0d69175ff4388b5785b4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When pasting text, it is possible that part of the text is still pasted
but part of it is not. For example, if there is a maximum length set then
only the first part of the text is pasted and the rest is dropped. In
this case it should still emit inputRejected() as not all of the input
was accepted. This amends c901cdadc0.
Change-Id: If7906767be27e88ed9914c50bf0427833de5b8fa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
[ChangeLog][QtWidgets][QLineEdit] Added inputRejected() signal for when
a key press is not accepted by the QLineEdit. For instance, when an
invalid key is pressed for a validator set.
Task-number: QTBUG-57448
Change-Id: I39182a78b07b37c6da01905b8da4c57930e3454b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Nothing in this test references date-times.
Change-Id: I4005cda550d54abe46370963b1e91fab9829298d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A step modifier already existed when scrolling with the
Qt::ControlModifier held. This patch applies this functionality to
other methods of stepping a spin box.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QAbstractSpinBox] The Qt::ControlModifier
increases the number of steps a QAbstractSpinBox takes for the
following interactions: scrolling, up/down keyboard keys and the spin
box buttons. Previously, Qt::ControlModifier only affected scrolling.
Task-number: QTBUG-67380
Change-Id: Icc8754d5c007da0771bfaef113603a2f334dd494
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
tst_QListView::horizontalScrollingByVerticalWheelEvents failed to
compile with this qmake argument.
Change-Id: I35dd4ad4c9ee92c06c94b21dd7325aee00fc98d4
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Qt already has the widget attribute WA_StyleSheet to which indicates that
a widget was subject to a style sheet, but it doesn't indicate that the
widget was actually affected by the style sheet. For example, an application
style sheet will set the WA_StyleSheet attribute on all widgets, even if it
only targets QPushButtons. The WA_StyleSheetTarget new attribute pairs with
WA_StyleSheet to give this extra information.
[ChangeLog][QtWidgets] Added the Qt::WA_StyleSheetTarget attribute to
indicate that a widget was affected by a style sheet.
Change-Id: I7cca18ddec8fbb69f294ae2ef990672a5f4f1d83
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
On macOS the selected text was empty when run together with other tests. Change
QApplication::setActiveWindow() to QWidget::activateWindow() to get keyboard
focus as well. After that the expected temporary file name is selected.
Change-Id: I3b0c2bfca8008cb89b7e666a362beb15a851d8e0
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now itemHasNoContents() is flaky when run together with others on macOS.
The failing assertion seems to be just checking that an effect added to an item
with the QGraphicsEffect::ItemHasNoContents flag is painted, so relax it to
allow multiple repaints.
Change-Id: Iecf445ce1bce672e7cd180a148cd53f9c60e40fe
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Windows 10 windows contain an invisible area within the NC window frame
on which the mouse cursor is enabled to perform resizing. This change
captures the geometry of the invisible margins and considers it when
moving a window, so that, for instance, a move(0,0) does not generate
gap between the window and the beginning of screen.
[ChangeLog][Windows] The dimensions of invisible margins inside the
frames of Windows 10 windows will now be disregarded in the positioning
of Qt windows to avoid a misplaced look (offset by a few pixels from
the expected position).
Task-number: QTBUG-55762
Change-Id: I1f537756eb1a093f78b919de9d44992528199700
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Wait for the spinbox to show become active in the previous test. Also use
QWidget::activateWindow() instead of QApplication::setActiveWindow(). Use of the
latter seemed to result in some confusion where QWidget::isActiveWindow()
returned true but QWindow::isActive() on the underlying window returned false,
leading qWaitForWindowActive() to fail.
Also remove superfluous setting of focus. It was just set and verified.
Change-Id: I023cdc2d272e23b2537b32606b7a3bf35bf671ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
setAutoRepeat() is failing on macOS and Windows when run together with
defaultAndAutoDefault(). It succeeds when run on its own. Adding the wait allows
it to succeed when run with the other tests as well.
Amends 0cb940b1d3, which removed the wait.
The comment is the same as before. I couldn't see a better way to replace the
wait (QApplication::topLevelWidgets() already returns only the testWidget and
testWidget->isActiveWindow() returns true).
Another theory I had was something waiting for the KeyRelease so I changed
QApplication::sendEvent() uses to QTest::keyClick(). It did not help but that
still seems preferable.
Change-Id: If87d1e6e018751f3068ea4c913ae6731aba41ff0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTableModel::setItemData() did not treat Qt::EditRole and
Qt::DisplayRole as the same. This lead to inconsistencies between
setItemData() and QTableWidgetItem::setData()
[ChangeLog][QtWidgets][QTableWidget] Fix handling of Qt::EditRole and
Qt::DisplayRole in setItemData().
Change-Id: I456f4c8e654de701dcd579236162b8aaa8ba1e53
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
