In order for other Qt modules to be able to reliably use this property,
it needs to be defined under all supported scenarios. Previously, it
would only have been defined for a per-repo build and not for a top
level superbuild. The only place it was being set was in the
Qt6CoreConfigExtras.cmake file and only when QT_NO_CREATE_TARGETS was
false (so it wouldn't be defined for examples even in a per-repo build).
It was also noticed that INTERFACE_QT_MAJOR_VERSION was also being
handled in Qt6CoreConfigExtras.cmake, but this was not needed. This was
already being done as part of a call to qt_autogen_tools_initial_setup()
which occurs inside qt_internal_add_module().
Fixes: QTBUG-90617
Change-Id: I589316ffb8138bd2df8a1d49fdd6335d2e2836f1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Bug: If you do a press and hold on a line edit, the edit menu
will show to let you select a word etc. If you now do
another press and hold to bring back the magnifier glass,
the edit menu will stay open while you move the magnifier glass.
This patch will ensure that we always hide the edit menu when
we show the magnifier. There is never a case where both of
them should show at the same time. By hiding the menu from
the place where we show the magnifier means that we can
remove code from the QIOSSelectionRecognizer that used
to do this for one of the cases from before.
Pick-to: 6.0 5.15
Fixes: QTBUG-90743
Change-Id: If2a92f94422c730c2b223129d96f5bc3bf3deeee
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
With gcc 10.2, I cannot compile qtbase without this patch.
Pick-to: 6.0 5.15
Change-Id: I5be48947e2301d5befeec397291c0da597f7eb63
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
which will become parts of TLS plugins in the future.
Task-number: QTBUG-65922
Change-Id: I4ee3c59c435fc34a9f4dacd3ff0e3cfb44251e23
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove 'corewlan' feature from the network related configure.json.
The 'bearer' component was removed in the Network module. It was
the only consumer of the 'corewlan' feature. There are no
plans, yet, to use CoreWLAN framework in the future.
Pick-to: 6.0
Fixes: QTBUG-90672
Change-Id: I1afb7b04ea75f8cb09cb570d820d16f54a130cf9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Private PCRE2-specific definitions should be only used with the
built-in PCRE2 library.
Ammends 7c69eb8868
Fixes: QTBUG-90556
Change-Id: If47e0b9eaaece290676d6c2b484bb52281aa7c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QT_BUILD_QMAKE_BOOTSTRAP and QT_BUILD_QMAKE_LIBRARY definitions
are never defined in the project since migrating to CMake build.
Change-Id: I7108c92387005a2fde6ebdb2d74843e3efc6413e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Turned our local diffs into a side-branch in the upstream repo, got
material changes upstreamed (leaving only our #include changes),
rebased it to master, copied back to our version. Upstream has made no
new release since 3.1.5 in 2019 May, but there is substantial change
since then, including acceptance of our upstreaming. Our patches have
been refined in the process of upstreaming.
The list of source files is slightly changed. The double-conversion.*
files are split in two, string-to-double.* and double-to-string.*, but
the old double-conversion.h header is retained, simply pulling in its
two halves. These thus need to be present in the include directory.
Changed the patches/ directory to be in git format-patch form, for
sending or applying to the upstream repo, before copying files into
the qtbase source tree. This should make future upstreaming easier.
Task-number: QTBUG-90214
Change-Id: Id94198f58ef7bdf02af117c35cb9678b5c34ac0e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Rather than the other way around, in preparation for deprecation.
Change-Id: I001d7617425a24e960871925130c5314c393ea8c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Member variables have been reordered to reduce the memory
footprint by 8 bytes.
Change-Id: Ib03f916c065861fa317f8802695363fd152e314a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduction of QObjectCompatProperty requires every write to
the property to be examined whether it is OK or should be replaced
by a setValueBypassingBindings/markDirty combination. The existence
of operator= make this difficult as it is easy to miss places where
it is written. By not having operator=, we can help developers
make sure they had a conscious decision about each write to the
property.
Change-Id: Ia61ea4722eb0bab26ce7684b85dd03d710cd1751
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When a modal window is WindowModal then it is possible for another top
level window to be active and therefore the menus shown may be valid
for the window. So we can still allow the menu items to be validated in
the context of that window.
Fixes: QTBUG-74088
Pick-to: 6.0 5.15
Change-Id: Ifb9c3fe12654b2972e0e3c368dc093fae1ed4cc8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It is quite common for a socket notifier to be disabled in a slot
connected to its activated() signal. But the event dispatcher did not
update the position in the list of registered notifiers, which caused
the next notifier to be omitted. Of course, on the next iteration of
the event loop, the omitted notifier would fire again, but this reduced
the scalability of applications that use a large number of sockets.
To solve the problem, we update the current position in the list when
a notifier becomes unregistered.
Change-Id: I6565bf23500d9e38ce84b34784d89d227fa166e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 8f8405e046.
Reason for revert: Appears not entirely thread-safe and caused QTBUG-90705
Change-Id: I390c0b1a555a18e6a095b52010371d017071e26b
Fixes: QTBUG-90705
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
When the QDial should be painted with an offset, the dial was not draw
correct.
Fixes: QTBUG-89574
Change-Id: I646c3d42fba34e8c603a8f81f363ed827f04d5de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Currently there is no visual feedback where the section move will end
up. Therefore mark the drop section to show where the dragged section
will be inserted.
Fixes: QTBUG-673
Fixes: QTBUG-1114
Change-Id: I3e45a9a9c0604342bb0286fc7cd4c89c757c28cd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When using static OpenSSL, HAVE_openssl test will fail, because of
unresolved external symbols. These symbols are from Ws2_32.lib and
Crypt32.lib, which CMake does not link by default. In qmake build
system, we can use OPENSSL_LIBS variable to specify these system
libraries. But there is no similar variable in CMake build system.
Accordingly, we should let OpenSSL::Crypto target link these libraries.
Upstream issue:
https://gitlab.kitware.com/cmake/cmake/-/issues/19263
Pick-to: 6.0
Change-Id: I5f27790b251d0a0f71aaf2aed2b933aeb3326f1f
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There is no reason for QVariant to go through QMetaType when it can use
the QMetaTypeInterface directly. Without LTO, the QMetaType method calls
are opaque, and we therefore risk to lose optimizations.
Additionally, avoid constructing a QMetaType from a type id if we
already have the QMetaType.
Fixes: QTBUG-90673
Change-Id: I7069ff6aff70d5baecdf5cf5760014c3dda81784
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is in line with QML where
import QtQuick 2.15
Rectangle {
width: 100
height: 100
color: "red"
Rectangle {
id: inner
x: 10
y: x
width: 50
height: 50
onYChanged: { console.log("hey"); inner.x = 10}
TapHandler {
onTapped: inner.x = 20
}
}
}
results in a binding loop warning when the tap handler triggers. While
the change handler would only run once, we cannot statically determine
if we need to loop once, twice, or if there actually is a diverging
loop. Thus we unconditionally warn about the binding loop and stop
executing the binding.
As a drive-by, verify in the related test that a change handler which
overwrites its properties binding itself removes the binding.
Change-Id: I5372019c2389ab724c49cd7489ecbd3ebced1c69
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
So far, all documentation about bindable properties was in the
corresponding classes QProperty and QObjectBindableProperty.
This patch creates one documentation page for a general
introduction to bindable properties and information
concerning all of those classes.
Change-Id: Ib718dbeb385c3899fb34cc2ce03bec7a8d43a034
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There are two methods which set the interval and do things
afterwards. Setting the interval might trigger other code. This
patch uses setValueBypassingBindings and marks the interval dirty
later, just to be safe.
Change-Id: I2cae3e4a9f040007dfd246c424250034e8df10a0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QTlsBackend is a factory itself - it creates TLS/X509 objects. Having
an intermediary between Factory->Backend->TLS primitive does not look
very natural thus let's squash the first two parts. Backend is a factory
creating TLS primitives, but its static functions also provide information
about backends availablei and give access to those backends.
Fixes: QTBUG-90606
Task-number: QTBUG-65922
Change-Id: I8409d81fd11fb46e6ab4465b4937a7680a8c2447
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
fix QLineEdit Cursor Rect and InputMask area overlapping,
the cursor rect area is white. when inputMask is set,we don't
need draw cursor.
Fixes: QTBUG-89578
Pick-to: 5.15 6.0
Change-Id: Ibec7f8f1f7331a12438fd821c2002903260da10a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Add internal function to cleanup compiler flags out of the
CMAKE_xxx_FLAGS_xxx variables. Use introduced interface to clear
the '/EHsc' flag for the MSVC compiler family. This adjusts the
CMake behavior to the qmake one.
Change the 'EXCEPTIONS' option handling in helper functions. Add
ability to add enabling and disabling exception flags. Previously
it was only possible to add disabling exception flags.
Fixes: QTBUG-89952
Change-Id: I60d47660a97ae9b5a1d1f4107d352c9e97890144
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Header files of a Qt module are usually found in subdirectories.
Avoid creating object file paths like "header_foo/bar.h.o".
When building with conan, the "header_foo" subdirectory was not created
for whatever reason.
Now, we make sure we have clean object file paths, e.g.
"header_check/foo/bar.h.o", and we create the directory upfront before
invoking the compiler.
Fixes: QTBUG-90529
Change-Id: Ifa5d6b97e07fc4e249c58cda5128439d60b14f5f
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
(cherry picked from commit 54980200c79b466a276a4d3054390e4b3162e9ed)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
By marking undeclared and unused copy/move constructors as deleted.
Change-Id: Ie74b9cb015090dbb425b701a55eadb9d80ab0285
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Read/write/notify properties, 3 out of 5 defined in this class.
Task-number: QTBUG-85520
Change-Id: Ic6c74f90a2fa3c71d71cf9a5d557f1b6fc489d35
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Same reason as for the version without args. Amends
1461df2ce4.
Change-Id: Ib9f0d8f27d858ff35134001c3cd7945b17668ae4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
To minimize code duplication, move the socket notifier deletion to the
closeChannel() function, where the pipe descriptor will be closed.
Change-Id: If75ba1c955c706ae6e2b3d9f53f7a25e4aa32fa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
As part of Qt 6 restructring for the extras modules, this change exposes
the Jni APIs which are very important for Android platform. This patch
adds the APIs QJniObject, QJniEnvironment, QJniExceptionCleaner based
from private QtCore and QtAndroidExtras.
The Jni interface is cross-platform which justifies the name, but
currently, this API is used mainly for Android, and the naming comes
generic without Android keyword to avoid any future limitation on
supporting other platforms.
[ChangeLog][QtCore] Add new QJniObject, QJniEnvironment and
QJniExceptionCleaner APIs.
Task-number: QTBUG-89482
Fixes: QTBUG-89633
Change-Id: I4382dd53a225375759b9d042f6035a4a9810572b
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Change-Id: Ie9c1484c8ad3483da3d559e1703770cdf22cec5e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We missed takeBinding as a supported operation on Q(Untyped)Bindable.
To avoid adding version checks to code dealing with QBindableInterface,
we simply synthesize takeBinding as a combination of binding to retrieve
the binding and setBinding with a default-constructed
QUntypedPropertyBinding.
Change-Id: I43803a0dfe210353d0235f0373d2257f75ffe534
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Consider a zero we need to divide with illegal input.
Fixes oss-fuzz 29347
Pick-to: 5.15 6.0
Change-Id: I2aae1d765d2dd81c95d423038ef5cb878d4f8026
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
The test was flaky in recent test runs on X11. Debugging
showed that the global position of the synthesized mouse
events was not correct due to the window not being mapped
properly. Use QTest::qWaitForWindowActive() instead of
QTest::qWaitForWindowExposed() to ensure that.
Task-number: QTBUG-90016
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ie1bc4157e6d0e807d8530f70dcbd27b5e2fc813c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We were using the first abbreviation in the list, where the current
time's one is probably more apt.
We look up displayName() using ICU, when in use, but that abbreviatio
may be unknown to it. So ensure, when using abbreviation in place of
empty id, that we get the system zone for ICU, for use if we're asked
for the display name.
This is a follow up to b12d6c6a8a.
Pick-to: 6.0 5.15
Change-Id: I177db55de1ffbc763def8a0423642f2b3da74fa6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have plenty of places where we add some squares and take a square
root; this may be done more accurately and faster by hypot().
Introduce QHypotHelper to handle hypot with more than 3 parameters,
and with 3 when the C++17 version is missing (which it never should
be). Include an overload taking arbitrarily many valus and ensure that
we can use qHypot() with qfloat16. Illustrate with some example uses,
add some tests.
[ChangeLog][QtCore][QMath] Header <QMath> now provides qHypot(), an
implementation of std::hypot() taking arbitrarily many numeric values,
including support for qfloat16, while avoiding the overflow and
underflow problems that arise when naively taking the square root of a
sum of squares.
Change-Id: Ia4e3913fe83fc27d17d8e7f1a52f03ad445c1fed
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Fetched from the authoritative source, verified the content matches
that of the current master revision in the github repository.
Amend one cookie jar test to find the last group in the last chunk
correctly - each group arises from a non-empty hsah-table entry, but
the last few hash-table entries may be empty, in which case the last
group isn't just before the last index, it's earlier by the number of
empty hash table entries. In the process, amend this test and the
related test of the end of the first chunk to iterate all the entries
in the group (in the present version, as it happens, each end-group
has just one entry, but that may vary).
Task-number: QTBUG-90214
Pick-to: 6.0 5.15
Change-Id: I6da365a6ca558124f8275e392735071dc77e04bb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
