Both QTemporaryFile and QTemporaryDir are documented to use the current
directory if given a pattern. That can be anything & arbitrary, so it
doesn't give us consistency in checking. Moreover, it might be a read-
only directory.
Drive-by fix the number of 'X'.
Task-number: QTBUG-117449
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd178841c44e9636a0
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
QtTest can't handle a test that does both. This ends up recorded as a
skip in the summary.
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd1788412a438085b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Added moveToTrashDuplicateName() to see what happens if you attempt to
trash two files with the same exact full path. Both files should get
independently moved to the trash bin and not clobber each other.
Added moveToTrashXdgSafety() to test that QFileSystemEngine will
properly skip over an unsafe $root/.Trash directory, as required by the
XDG specification. I think the specification should also make security
requirements on $root/.Trash-$uid too, but that's for another change.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1786cd60e4244c7c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In non-static builds, of course.
Change-Id: Ifbf974a4d10745b099b1fffd1777ac97c0921759
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If a move-to-trash operation failed, e.g. because the file was opened by
another process (or QFile), then the moveToTrash function would still
return true.
MSDN documents the IFileOperation::PerformOperations to return whether
the operation succeeded, but evidently this is only a statement about
the execution of queued up operations, not a statement about any of the
operations' success.
If the operation succeeded is reported by an HRESULT parameter
of the IFileOperationProgressSink::PostDeleteItem implementation,
and we ignored that parameter so far.
Check it via the SUCCEEDED macro, and set a boolean sink variable based
on that, which we can inspect to return the correct value.
Augment the test case by opening those files we create ourselves, and
if that fails (which it will on Windows, but not necessarily on other
platforms), then try again after closing the file. If the first attempt
succeeded, then the source file must also be gone.
Pick-to: 6.6 6.5 6.2 5.15
Fixes: QTBUG-117383
Done-With: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icb82a0c9d3b337585dded622d6656e07dee33d84
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Makes it easier to locate later which test may be leaking stuff.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd178713f869752761
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The moveToTrash tests, on XDG platforms, would be trashing to
~/.local/share/Trash. Unlike Windows and Apple systems, the XDG trash
spec creates two files and these tests weren't deleting both of them, so
we had a slow increase of left-over files in ~/.local/share/Trash/info.
Cleaning up ~/.qttest is left as an exercise for the users. For example,
$ cat ~/.config/user-tmpfiles.d/qttest.conf
#Type Path Mode User Group Age Argument
e %h/.qttest 0700 - - 1w
Pick-to: 6.6 6.5 6.2
Change-Id: I9d43e5b91eb142d6945cfffd1786aeff91d34fde
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We know that all lines from /proc/<PID>/maps end in a newline, so we
trim exactly that one byte, then we put it all back together with
.join('\n') to check if we've read the entire file.
Linux virtual files are usually served in 4 kB increments; tst_qfile's
maps file is about 16000 bytes for me, just short of the QIODevice buffer:
[pid 414315] read(5, "55c6afe04000-55c6afe11000 r--p 0"..., 16384) = 4049
[pid 414315] read(5, "7f215fd25000-7f215fd26000 r--p 0"..., 12335) = 4038
[pid 414315] read(5, "7f2160800000-7f21608c7000 r--p 0"..., 8297) = 4072
[pid 414315] read(5, "7f216119f000-7f21611a0000 rw-p 0"..., 4225) = 3994
It is not a coincidence that the reads are at line boundaries, though
it's not a guarantee from the kernel.
We appear to have accidentally fixed the QEMU emulation bug by reading
another process' /proc/<PID>/maps (hypothesis: QMU emulates the target
system in /proc/self, hiding itself in maps, but makes no translation
for other process map files.
Change-Id: Ifbf974a4d10745b099b1fffd1777ac919b12dc90
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use std::initializer_list/std::array for data known at compile time.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH".
Drive-by change: de-duplicate some trivial code.
Task-number: QTBUG-115839
Change-Id: Ifb1a93579bd4ab8fd10f78665a28559cc61da7e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The loop was iterating over a temporary container, so it couldn't have
changed it. Store the container in a const auto variable and use
ranged-for.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH".
Task-number: QTBUG-115839
Change-Id: I402df5fa48f4287f3cc989ddae1524da43999049
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
My FreeBSD does not have /proc mounted, so this test doesn't run almost
ever. I have no idea about OpenBSD and no one has tested Qt on AIX in
over a decade.
Change-Id: Ifbf974a4d10745b099b1fffd1777a598ee91eb5d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I28b6d3815c5f43d2c33ea65764f6f3f8f129eaf3
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were basically timing the qSleep, which is pointless. We don't need
to verify that qSleep(X) spends at least X time. Because it also
doesn't. Somehow, QNX can execute 1000 ms sleeps in 996 ms.
Amends commit 30e5ff3ff2.
Pick-to: 6.6 6.5
Change-Id: I46b5dede27114be29724fffd176a66c1799075b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Pipes are unnamed FIFOs, so they're basically the same.
The difference here is that open() blocks on opening a FIFO until both
ends of the FIFO are opened. This helps us in synchronizing the two
threads and thus ensuring that that the read() system call deep inside
QFile does, indeed, block.
We see this with strace -T on Linux:
[pid 662956] openat(AT_FDCWD, "/run/user/1000/tst_qfile_fifo.2575572361", O_RDONLY|O_CLOEXEC <unfinished ...>
... aux starts up ...
[pid 662957] prctl(PR_SET_NAME, "QThread") = 0 <0.000004>
[pid 662957] openat(AT_FDCWD, "/run/user/1000/tst_qfile_fifo.2575572361", O_WRONLY|O_CLOEXEC <unfinished ...>
[pid 662956] <... openat resumed>) = 4 <0.000133>
[pid 662957] <... openat resumed>) = 6 <0.000011>
[pid 662957] clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=500000000}, <unfinished ...>
[pid 662956] read(4, <unfinished ...>
[pid 662957] <... clock_nanosleep resumed>NULL) = 0 <0.500183>
[pid 662957] write(6, "\2", 1) = 1 <0.000033>
[pid 662956] <... read resumed>"\2", 1) = 1 <0.500311>
Pick-to: 6.6
Change-Id: I63b988479db546dabffcfffd1766d7a48819b149
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We observe failures in CI on QNX because the measured timeout is ~995ms
rather than the expected 1000ms. Start the timer before the thread
starts to guarantee that at least as much time elapses as the thread
waits before writing the second byte to the pipe.
Otherwise, the thread might be sleeping already when the timer starts,
and then we can't rely on any measurements.
Pick-to: 6.6 6.5
Change-Id: I6072569a987f5e952b0953e0e394a223f891fd25
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
I got tired of being told off by the inanity 'bot for faithfully
reflecting existing #if-ery in new #if-ery. Retain only the
documentation and definition of the deprecated define.
Change-Id: I47f47b76bd239a360f27ae5afe593dfad8746538
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With the introduction of a new atomic variable the users should use the
class QNtfsPermissionCheckGuard or the helper functions
- qEnableNtfsPermissionChecks()
- qDisableNtfsPermissionChecks()
- qAreNtfsPermissionChecksEnabled()
to enable/disable permission checks instead of manually managing the
variable qt_ntfs_permission_lookup (which is a non-atomic variable and
as such prone to data races).
Also moved the variable qt_ntfs_permission_lookup to qfile.h to make it
clash with the user-side declarations the documentation suggested to
use (and it is probably also a better fit thematically anyway).
[ChangeLog][QtCore][Deprecation Notice] Deprecated the variable
qt_ntfs_permission_lookup to avoid race conditions while enabling or
disabling permission checks. It can be replaced by the RAII class
QNtfsPermissionCheckGuard or with the functions
qEnableNtfsPermissionChecks(), qDisableNtfsPermissionChecks() and
qAreNtfsPermissionChecksEnabled().
Fixes: QTBUG-105804
Change-Id: I93a563864ffb3f9945551c34004d8ca393603b25
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
qt_ntfs_permission_lookup is a global, non-atomic variable which
could cause problems in case of multiple threads. Introduce a
new atomic variable to handle permission lookups but instead of
manual incrementation/decrementation, implement a class to manage
the variable.
Since the atomic variable is not directly available to the user,
implement helper functions to increase/decrease/check the status
of the variable.
Task-number: QTBUG-105804
Change-Id: If6cbcdd653c7f50ad9853a5c309e24fdeb520788
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Removes a warning in the build.
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215c40b40333cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test was using the same tags twice each, giving no clue to the
difference between the two test-cases for each.
Change-Id: I645b01c0c4008a766e505047cb05cc22640ee129
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
On Unix, we have the fchmod(2) system call that changes the permissions
of an open file descriptor. This commit adds a test for that, by not
closing the QFile before setPermissions().
Pick-to: 6.4
Change-Id: If5d5ef6220874ae8858efffd171255b9f20ed501
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In theory, if we succeed, the permissions should be what we set, but
let's not make that assumption. And if we failed, it might be because
the file disappeared or something else, so re-stat()ing the file is a
good idea.
Pick-to: 6.4
Fixes: QTBUG-7211
Change-Id: If5d5ef6220874ae8858efffd171255506b7bbee0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unifies our approach to calling CoInitializeEx and CoUninitialize,
removing a lot of boilerplate in the process, and also fixes a few
bugs where we would incorrectly balance our calls to CoInitializeEx
and CoUninitialize.
The optimistic approach of qfilesystemengine_win.cpp of calling
CoCreateInstance without initializing the COM library explicitly
has been removed, as calling CoInitializeEx should be a noop in
the situation where it's already been loaded.
Change-Id: I9e2ec101678c2ebb9946504b5e8034e58f1bb56a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Windows VMs are provisioned with shared folders that are available as
\\${COMPUTERNAME}\testshare(writable)
so we don't need to access a remote SMB server over network anymore just
to test whether our string-parsing code handles UNC paths correctly.
Add a QTest::uncServerName() helper function to the shared filesystem.h
header and use that instead of QtNetworkSettings::winServerName. The
latter is now only used in tst_NetworkSelfTest::smbServer().
Pick-to: 6.4
Change-Id: Id0da66369ad0f4a980d612de2a31a391f1192253
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The new overload allows creation of files with non-default permissions.
This is useful when files need to be created with more restrictive
permissions than the default ones, and removes the time window when
such files are available with less restrictive permissions.
[ChangeLog][QtCore][QFile] Added QDir::open() overload that
accepts permissions argument.
Fixes: QTBUG-79750
Change-Id: Iddfced3c324e03f2c53f421c9b31c76dee82df58
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove at() and chmod() methods of MyEngine class. Those methods
are not used anywhere and look like remainder of old API to me.
Change-Id: I754a4281124cb8c9d74e79a9a2b99fb1b1f41e52
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove useless overrides of QAbstractFileEngine methods from the derived
classes. Also remove "This virtual function must be reimplemented by
all subclasses" passages from the QAbstractFileEngine's documentation.
There are pure virtual methods for such use cases. QAbstractFileEngine
already contains useful defaults for classes not supporting all the
functionality.
Change-Id: Ia25965854f3809b15d7502da3749cc2f3414bbc3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The decltype() of a const auto variable will be const T, for some
T. GCC warns that in the static_cast, said const is ignored.
Fix by not casting, but declaring a variable of fitting type. Add a
scope so the next reader doesn't have to go hunting for further uses
of 'readResult' or, now, 'expected'.
Change-Id: Iebc828a522810c6f2514fb3542d8c76c755ec7a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
