Extend the fix 53d5811b0c
to work for the file generation mode as well.
Pick-to: 5.15
Fixes: PYSIDE-1273
Change-Id: I5a91e2de87b44658f276cea87cbd730452b1bd78
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Move QT6_ADD_RESOURCE to Qt6CoreMacros in order to avoid the extra
config file step.
Change-Id: Ib445ca35c648cf344ee8795de8bdddc0f0758972
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since there's no way to register callbacks or to store functions to be
called later in CMake, the only way to isolate the quick compiler
behavior for qt_add_resources() is to wrap it in a conditional check.
As soon as someone loads Qt6QmlMacros, the variable will set and the
functionality will be available.
Change-Id: I5fbdf2966e7dfdc734512a5b2b973e0ace9da5df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is basically a duplicate of the commit which fixed building with
musl, but on linux-g++, 813f468a14.
Change-Id: I399005ac6947ba3f2b4ed5087472cd9d54a0850d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Otherwise we may perform a use-after-free.
Change-Id: I58080dfc8bb6ef9a86f2118407a05db8ae1ecfbd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the move-only versions of result reporting and getting operations,
if the type of QFuture is not copyable.
Task-number: QTBUG-81941
Change-Id: Ic9fa978380e2c24e190e68d974051a650b0e5571
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This maps to the CMake variable QT_USE_CCACHE.
Change-Id: I3258027301284d907f6ecde6c65d2c0dde8f0a11
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable CMAKE_INTERPROCEDURAL_OPTIMIZATION.
Change-Id: Id0ce48f176b95c27e74ab80276e89503b1660f79
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Once we can require CMake 3.17 everywhere, we can remove the variable
set up from QtSeparateDebugInfo.cmake.
Change-Id: I91572583654054f5fa47ac1e41be23050a5a8c0b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Cleaning up those that are trivial to remove because they have direct
replacements.
Change-Id: Ie9fecd8c4822ed1a8f378b210cc4c4d9a10f7e36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Not used anywhere in qtbase or other modules, so trivial to remove.
Change-Id: I98575e77f181e617675e536ff0dd67ac93a2f0f5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Cleaning up those that are trivial to remove because they have direct
replacements.
The QLabel changes to the pixmap/picture getters provide the following
migration path:
QPixmap *ppix = l->pixmap(); // up to 5.15, warns in 5.15
QPixmap pval = l->pixmap(Qt::ReturnByValue); // new in 5.15, works in 6
QPixmap pixmap = l->pixmap(); // from Qt 6 on
The overload with argument can be deprecated after the first LTS or
so.
Change-Id: I8494ceeea55b2aeda0bd340640ad95cb7c91f7d6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
In a non-prefix build, the module .pri files must end up in the
mkspecs/modules subdirectory of qtbase's build directory.
Change-Id: I241f4e274d31de7c1e3c2fa8e5e26fb8747f11c5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Implemented some necessary functionality to generate correct .pri
information, so that qmake can build modules.
Task-number: QTBUG-75666
Change-Id: I63281adfef3d01385928b1d8c4be0b32ac97c4d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit also adds a qt_finalize_module function that is called for
every Qt module after all link dependencies have been added.
Change-Id: I489d188d05e368208a8a62828bb12fb395df54bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature was removed in commit 60588e1a.
Change-Id: I061410dfab13a2210474014892d1bc828a5b21cf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In 73f3f501f3, the classes were
moved out of Qt Gui, and a mechanism to attach them to the
QOpenGLContext was implemented using a QMap and a connection
on destroyed to delete it.
This solution was not thread-safe, so the suggestion was to either
add a mutex or to make an opaque pointer for the storage in the
(thread-affine) QOpenGLContextPrivate.
I decided to go with the latter. A solution using hash lookups
and mutexes seems to complex when the only benefit is to avoid
forward declarations from Qt Gui to Qt OpenGL in private API.
Especially since this dependency already exists with
the "textureFunctions", which serve the same purpose,
although the destructor is being passed in as an explicit
function pointer there, probably because the ambition was
to use a forward declaration rather than a superclass.
Fixes: QTBUG-82742
Change-Id: I5c6b82c5b33d9cb73ad1ec05d3fc3e87a9eae4cf
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We don't want people accidentally installing tests into the
Qt prefix.
Change-Id: Ic99492559875f753897a83af162253cac846a8a5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The install prefix in such a case is the qtbase build dir,
and not the qt6 top-level build dir. This caused issues with
certain incorrect paths being generated, including a broken
qt-cmake-standalone-test script, as well as upon reconfiguration
determining that a non-prefix build should be installed.
The fix for a non-prefix build is to check explicitly for
the qtbase build dir. This works both for super and non-super
builds.
Task-number: QTBUG-83496
Change-Id: Ida2393176c4c81da767023ff48159afdedfb0a19
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also fixed a few unrelated typos in docs.
Task-number: QTBUG-83236
Change-Id: I776cda8f0ef4de6c4a93e94092dc19e94d1884c8
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
This is a follow-up to commit ed2b110b6a
to fix indexing errors. Added the test that should have accompanied
that commit, which found some bugs, and refined the Indian number
formatting test (on which it's based).
Make variable i in the loops that insert grouping characters in a
number be consistently a *character* offset - which, when each digit
is a surrogate pair, isn't the same as an index into the
QString. Apply the needed scaling when indexing with it, not when
setting it or decrementing it. Don't assume the separator has the same
width as a digit.
Differences in index no longer give the number of digits between two
points in a string, so actively track how many digits we've seen in a
group when converting a numeric string to the C locale. Partially
cleaned up the code for that in the process (more shall follow when I
sort out digit grouping properly, without special-casing India).
Change-Id: I13d0f24efa26e599dfefb5733e062088fa56d375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QT_OPENGL_ES* macros are leftovers from an earlier,
ad hoc configuration system, which has since been
replaced by QT_CONFIG. To clean things up in Qt 6,
we use the new way instead.
Task-number: QTBUG-83467
Change-Id: I578dc7695bff9d5ee303b22e44f60fee22fe0c28
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The original was too close to QOPENGLVERSIONFUNCTIONS_H for comfort
so to avoid future confusion or errors, just use the convention
of matching the file name.
Change-Id: I57fcc4da239ddec329f75ac29b254b5909c39bf0
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
And remove a test failure when compiling with asan enabled.
Change-Id: I2b8e676665572adcbbac6a910983d5b209bf6d23
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Instead of requiring the implementation to do the compare dance, let's
do this in the library. This reduces the amount of duplicated code
slightly and makes it easier to generate binding code from qml files.
Change-Id: Ia3b16cf9769e74d076b669efe4119ab84af3cdf0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Passing the QExplicitlySharedDataPointer by reference may lead compilers
to wanting to have visibility to the destructor of the contained type
(QPropertyBindingPrivate), which is not public. Fortunately
QExplicitlySharedDataPointer is safe to use with raw pointers and those
can be safely forward declared.
Change-Id: I131ab6363eaee10b6dce196fb2c769e09a5c9557
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There is no need in 'acquire' operation for the next reasons:
- wakeUps is simply used as an atomic boolean that does not require
ordering with other loads or stores;
- any of testAndSet...() always gets a latest version of wakeUps.
Change-Id: Ica38fc62bc181166995946dee9d6887c71d87cec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If there is no text codec support, assume local8bit is utf8, not latin1.
This is in line with what 99% of all modern systems do.
Change-Id: I35ebcd43ef3572a25f549a8375857dcabcfec4ca
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix the QString constructor used for restricted casts
from char *.
Change-Id: Id7e71f6d0bcd4627bb44b2bd6d6790be2b6ed976
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Cleaning up those that are trivial to remove because they have direct
replacements.
Change-Id: Ie8ac02c3d6273110f1f11e17fdeae496bc66321f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
And a few cleanups of out-dated comments and dead code.
Change-Id: I59c6b9129a21b8953626cb63c3ebbf9b6c49a657
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The context—which lives in QtGui—now knows nothing about versioned functions.
This changes the public API for getting version functions for a context.
[ChangeLog][QtGui][OpenGL] QOpenGLContext::versionFunctions() has been removed.
QOpenGLVersionFunctionsFactory::get() from the QtOpenGL module should be used
instead.
Previously one would call
context->versionFunctions<QOpenGLFunctions_4_0_Core>();
Which now becomes
QOpenGLVersionFunctionsFactory::get<QOpenGLFunctions_4_0_Core>(context);
The rest of the API should be identical.
Since glgen no longer compiles, and the links to its input (gl.spec and gl.tm)
are dead, I've edited the previously generated files manually. If glgen is
fixed, it should be quite easy to make it generate the new way.
Task-number: QTBUG-74409
Change-Id: I800527e0af16a79005b276eeb74417770193c62f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fix some warnings that are flagged as errors on clang10.
Change-Id: I906634c8b2bd94db42d74a7f3d10efb086e373cc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The windows and macOS implementations where still using QRegExp
in one place.
Change-Id: Iaf6c6ead10f7f061ff0edce889abe18751b9d308
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Expand $$MODULE_BASE_DIR to ${QT_BUILD_DIR}.
Add library mappings for Hunspell.
Add test mappings for QtVirtualKeyboard regarding 3rdparty Hunspell and
T9Write.
Change-Id: Ief007456d0471cbcf9a03d819291edec5f63680f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use P0608's trick to detect convertibility without narrowing;
and now that we can depend on C++17, use its features.
First, this moves the burden of detecting a narrowing conversion on
the compiler, rather than us maintaining a complicated series
of checks. Of course, this exposes
* bugs in compilers (e.g. GCC < 9 thinks that float->bool is not
narrowing;
* behavior still not (widely) implemented (pointer to bool
conversions are narrowing, P1957);
* interesting compiler choices, e.g. GCC 9 thinks that unscoped
enumerations are non-narrowing convertible to a datatype big
enum to contain all the _enumerators_, even if the underlying
type of the enum (and/or its sizeof()) is wider than the target
datatype.
Second, it allows to detect conversions that have a narrowing
conversion as an intermediate step. Given a type like
struct Bad { operator double() const; };
then an object of type Bad is implictly convertible to a type
like int via a narrowing conversion. Therefore, a connection
is possible between a signal carrying a Bad and a slot accepting
an int. We can now detect and block this.
Tests regarding scoped enumerations have been dropped,
for the simple reason that a scoped enumeration is not
implictly convertible to an integral type, so we don't have
that detection (it would constantly fail). Scoped enumerations
do not take part in narrowing conversions anyhow, cf. [dcl.init.list].
[ChangeLog][QtCore][QObject] The detection of narrowing conversions
when calling QObject::connect() when
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT now takes also
into account user-defined implicit conversions that undergo
through a narrowing conversion.
Change-Id: Ie09d59203fe6283378b36dfbc54de1d58098ef51
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Mention that . matches newlines in QRegExp, but not by
default in QRegularExpression.
Change-Id: I9663fe30c7b7e068d673aa8d51884f6828e0ee59
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
