It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not necessary to call QWindowsScreen::windowAt() for every mouse
message received, but only when the mouse is captured, like it's done
in the legacy mouse handler.
Change-Id: Ib1035921291d22a32dfa3a619815a3f4ff9b3622
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Special applications like screen recorders can create special, invisible
windows which are detected by the ChildWindowFromPointEx() as used in
QWindowsContext::findPlatformWindowAt(). Fall back to WindowFromPoint()
which skips those in case nothing is found.
Fixes: QTBUG-40815
Change-Id: Idb5253c412fb4522c844edf5eadedc6e0fad3979
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
If automatic sysrootification is in effect (SysrootifyPrefix=true in
qt.conf) then the qmake property variants $$[FOO] and $$[FOO/get] must
be sysrootified. The latter was never sysrootified.
All other variants (src, dev, raw) are supposed to be without sysroot.
Flesh out a sysrootify function and readabilitify the code a bit while
we're at it.
Fixes: QTBUG-71673
Change-Id: Ifcbce8c035b9da447da9d6937edd5a4aa84573ba
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
Many operations on and with QPainterPaths do calculations on the path
coordinates, e.g. computing the distance between points, which may cause
numerical overflow for extreme coordinate values. This patch
introduces a limit on the coordinate values and extends the previous
check against nan/inf coordinates to also check against out of range
coordinates.
Fixes: QTBUG-75574
Change-Id: I3a2fa88bfc6a9f19934c43d3dbbfb41855c78107
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It's too dark as it is now. Since there is no similar UI element
in AppKit, we take the same color as the toolbar's handle has (looks
OK-eysh with 'Dark' and there is no reason to have the separator with
a color different from the bar handle, both elements essentialy are
lines of dots).
Fixes: QTBUG-72759
Change-Id: I28277f80174a1c4c0af17961aba8ed6135aa3189
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The value of NColorRoles got changed since 5.11. It introduced one more
role called "PlaceholderText" in the ColorRole enumeration.
When using QDataStream (5.12) to read QPalette objects from a file
written by 5.9 (<5.11), the processing results are inconsistent.
Fixes: QTBUG-74885
Change-Id: I14d57f9603a26e5890b4fd57c7e464c5b38eb3f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The qmake code to read output from dependency-generation was adding
QByteArray values to a QString, thereby tacitly converting from UTF-8;
this is misguided. Hopefully, the command emits its output in the same
local 8-bit encoding that QString knows to convert from.
Simplified needlessly verbose loops (that violated Qt coding style) in
the process.
Fixes: QTBUG-75904
Change-Id: I27cf81ffcb63ebc999b8e4fc57abdb9a68c4d2b3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The state of the module is done, not deprecated, so we shouldn't
recommend users to move away from it in all cases. There's also
no direct replacement for the DOM API.
Fixes: QTBUG-70629
Change-Id: Ifaff9757234bd68a411a3da1403c57bbbcb94693
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It seems like an optimization on the itemsDirty flag
caused a bug to be re-introduced. When a popup is shown
on a new screen, the itemsDirty must however be set to
ensure that new correct sizes are calculated.
Task-number: QTBUG-59794
Change-Id: Ifb5c233b1f9d4d38bd0cd7a9a71cc32ad3212f8c
Reviewed-by: Morten Kristensen <msk@nullpointer.dk>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Without this some readers will fail to display the image or position
the image at the start of a paragraph rather than inline.
Change-Id: I2b9257e3193e5e68eb20112017a0c23be1d06cb0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If an embedded image is already encodeded as an png or jpg write the
data as is instead of decoding to a QImage and re-encoding as a new
image.
Change-Id: I479ae1fddbf59900a500497dd1bdf7449c21f273
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Replace QWindow / QScreen / QPlatformScreen overloads with template
functions that take a generic context argument.
The API now no longer supports implicit conversions from
QPointer<QWindow> to QWindow *, add explicit data()
call to usage in qxcbdrag.cpp.
Change-Id: I63d7f16f6356873280df58f4e7c924bf0b0eca5b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fix the condition introduced by that determines whether
a completion is started on signal QFileSystemModel::directoryLoaded()
(introduced by 416ec00e7c859a844a5bcb24c7a31147aed974c / Qt 4).
Observe case sensitivity and the native separator and return true for
root directories.
Task-number: QTBUG-38014
Task-number: QTBUG-14292
Change-Id: Ie425c04d2df256248e84250ba777793a8106a738
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
f1033567aa improved resize of windows with custom titlebar by adding
more margin, but the check was too tight.
d2d6c6f781 tried to fix the regression, but not totally
The mode is only set *after* the mouse press. It will always
be NoWhere the first time, so that check will always discard
the mouse press, making moving the window always fail the first time.
Also, if the rect+range contains the press, then surely the mode
won't be nowhere once set.
There's still room for optimization, like bailing out early it was
the right button instead of the left button, but that's out of scope
for this bug fix, and also not worth for 5.12 branch.
To reproduce the bug, simply:
- Run examples/widgets/mainwindows/mainwindow
- Click the red button of the blue dock widget, to make it float
- Drag the title bar (not too slow).
Fixes: QTBUG-66454
Change-Id: I0eebfb932dab95267ebadccd757de11a8bfe419d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Nathan Collins <nathan.collins@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QMetaEnum fromType() also works for enums declared with Q_{ENUM,FLAG}_NS.
This hadn't been added to the message when we added Q_{ENUM,FLAG}_NS.
Fixes: QTBUG-75829
Change-Id: Ib71dae83dd8d837adf46b73cd299b8e61bdb1f64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When trying to find the screen, the function would always
try to determine the screen by checking parents, despite
QWindowPrivate::positionAutomatic being false.
Determine the screen from the initial geometry when
QWindowPrivate::positionAutomatic is false. Bail out when
positionAutomatic and resizeAutomatic are false.
Fixes: QTBUG-75940
Change-Id: I3cd1b16feab16c89d29856cf3e1bccf2c89280c7
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The test is failing in 5.13 for unknown reasons.
Task-number: QTBUG-72296
Task-number: QTBUG-72344
Change-Id: I24c1ad1b6def3096de99caeeebeee6e204cc75ca
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
getTextBeforeCursor() and getTextAfterCursor() were not properly
handling the case when the cursor is in the middle of preedit string
(just as TODO comments inside these functions were saying). This was
causing problems with Gboard when the user focuses a text editor by
tapping in the middle of a word.
Fixes: QTBUG-58063
Change-Id: I4a580a74d79965816557bfb342337975348d1c45
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
According to Android docs start == end in a call to setComposingRegion()
means finish composing. But this case was not being handled properly:
m_composingText was being assigned an empty string, but
m_composingTextStart was being assigned the value of start, which is
never -1.
There is one other possible cause of "Input method out of sync"
warnings, but it is tightly coupled with another bug, so it will be
fixed by a separate commit.
Change-Id: Ie475df84f330453ce4fc623e8b631b435d7d0042
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Send the aboutToShow() signal to QMenu before synchronising the
widgets for the menu items. This fixes a bug where if new
QWidgetActions are added to the menu from a slot triggered by the menu's
aboutToShow() signal, then such new actions do not shows up correctly on
Mac. Other platforms are not affected by the change.
Fixes: QTBUG-75826
Change-Id: Ic245d3fbc7ddde6944cca6cdb8e8951380c846ec
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I6c1d83624838362f6a3daa6c2b309fb518a25d4b
Fixes: QTBUG-75673
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
This allows closing, minimizing and maximizing the window.
Fixes: QTBUG-74999
Change-Id: I8b3ad806a1767586c8cf7e5a1848fc0e525621cd
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
If the native color dialog is in use we haven't created any of the
widgets and will crash when trying to update them.
Change-Id: I6c43cc47359110c3b9db7cacb62581446cc6f7a3
Fixes: QTBUG-75858
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Qt on macOS has traditionally not included a BOM in the UTF-16 data,
but due to iOS requiring it it was changed in 4e196159. This had the
unfortunate side effect of breaking macOS applications that were not
prepared for the BOM, even if the public.utf16-plain-text UTI can have
an optional BOM, most notably Microsoft Excel. It also resulted in the
public.utf8-plain-text having a BOM, as that's automatically generated
by macOS based on the UTF-16 content we give it. Having a BOM in UTF-8
is technically fine, but not required, and recommended against.
The fact that iOS requires a BOM is a bit dubious, and most likely a
result of applications or system frameworks decoding the data using
NSUTF16StringEncoding, which assumes big-ending byte ordering if there
is no BOM, as opposed to public.utf16-plain-text which assumes native
byte ordering. Since we can't fix iOS our best bet is to include a BOM.
For macOS though, we revert back to the old behavior of not including
a BOM, since that seems to surprise macOS frameworks and applications
the least, even if having a BOM in public.utf16-plain-text should be
fully supported.
Longer term we should look at what kind of UTIs we generate. Most apps
on macOS do not generate public.utf16-plain-text, but instead generate
public.utf16-external-plain-text, which differs from the former in that
it assumes big-endian byte-ordering when there's no BOM. On iOS apps
seem to generate public.utf8-plain-text, and do not generate any UTF-16
UTIs. Moving Qt over to these UTIs would fix the problem as well, but
is a larger change that needs more research.
Change-Id: I4769c8b7d09daef7e3012e99cacc3237f7b0fc1a
Fixes: QTBUG-61562
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The window tends to grow to span screens in multi-screen setups; force it to
be on the primary screen by showing it maximized in that case.
Change-Id: I984ba7a4cd4abd1f862c59c8dca0e2275f44c724
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax where possible
- Ensure top level widget list is empty after each test, delete left-over
menu bars and disable menu animations
Change-Id: Ieeb943ea669cd139f1835088b816802e777a9676
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Introduce origin(QWindow *), which returns the point
around which coordinates should be scaled: the screen
origin for top-level windows, and (0, 0) for child windows.
The code paths for top-level and child windows can
then be combined.
Change-Id: I6b9cdbd9e7c2d9406e9137e325c4eb5c79e3ac9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the left or right mouse buttons are pressed over the window title
bar a WM_NCLBUTTONDOWN/WM_NCRBUTTONDOWN message is received. But when the
button is released, no corresponding UP message is received, but only
a WM_NCMOUSEMOVE or WM_MOUSEMOVE. This makes the internal mouse button
state stored in QGuiApplication get out of sync with the actual state,
resulting in an incorrect button state being used in QWheelEvent.
This patch detects the button release condition and generates the missing
release event.
Change-Id: I6dd9f8580bd6ba772522574f9a08298e49c43e61
Fixes: QTBUG-75678
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When bringing an application back to foreground, args may contain NULL.
These nullptrs should not cause application crashes.
Fixes: QTBUG-75843
Change-Id: I642e3c359216e7706bcb13508399999a51a4fc2d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Document public macros in Qt5CoreMacros.cmake. This will replace
the list in the current CMake Manual.
Task-number: QTBUG-72159
Change-Id: I377412fe0c1d0a9b232162bbab88ac830d2cac80
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Use a fuzz check (cf 6309062722) and a minimum
size similar to tst_qwidget to make the test pass on large monitors with or
without active scaling.
Change-Id: I5a9e28e38e1d007057894c349c94f0e6fe12009c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Use nullptr
- Fix C-style casts
- Fix redundant bool expressions
- Fix else after return
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax
- Remove unused variables
- Streamline code in some cases
Change-Id: I1350b382b0b7d0f3198039fdc78892cfa1dd498d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Use nullptr
- Fix C-style casts
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Streamline code in some cases
Change-Id: I4c9b99126cff02136def0e03accdf1129fe6d72b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax; use lambdas where applicable
to remove helper slots
- Streamline code in some cases
- Replace helper function to convert touch points by the one in
QWindowSystemInterfacePrivate
- Use a logging category for the debug outpt, silencing some output
Change-Id: Ia46c7ad7c08f3afc8e5869ea99b66e406de97781
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It's not clear why this test fails - and only does so sometimes - but
fail it does, so we ned to skip it to let development keep going. As
it happens, the same platform over-optimizes various computations
using qfloat16; which can at least be used to test for this platform,
since it wrongly distinguishes two qfloat16 values that theory and all
other platfomrs agree should coincide.
Fixes: QTBUG-75812
Change-Id: Ie9463d7dc21bca679337b475d13417b9f42bbf9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Fusion style's SH_ItemView_ShowDecorationSelected hint is hard-coded to 1,
but in QCommonStyle::drawPrimitive (which QFusionStyle inherits) it only
asked its own QFusionStyle::styleHint() before drawing the background that
happens to be under the tree row decoration (arrow thingy or +/- symbol).
And the style doing the rendering does not know about QStyleSheetStyle so
by the time we get to QCommonStyle::drawPrimitive() it's too late to check.
Therefore QTreeView needs to avoid calling it in this case.
Fixes: QTBUG-73251
Change-Id: I2d0ed4d3b2ee805a5602122273387982caa564f8
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The code that deals with text selection in the iOS QPA
plugin, listen for changes to text selection. And depending
on whether we have a selection or not, we show or hide
the selection handles together with the edit menu.
The problem is that the edit menu will also be told to
show from other places, even if there is no selection. And
for those cases, we should avoid closing it.
This patch will check, before we close the edit menu, if we're
tracking a selection. If not, we leave the edit menu alone.
Fixes: QTBUG-75099
Change-Id: I001d818fa2ad4a215cc3fa6aa4c7faf516e1ed59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When there is no DBus session, there will be no Linux accessibility,
since it relies on the presence of DBus.
Fixes: QTBUG-50189
Fixes: QTBUG-51940
Change-Id: I7503011b39ba2a806ddc12e89d0f7bd72a628b64
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
FT_GlyphSlot_Oblique(), the Freetype function to synthesize a
slanted/italic font, only accepts glyphs with outline format. So
disable loading bitmap format glyphs when that function will be used.
Fixes: QTBUG-73586
Change-Id: I762a4bc34537e0725ead0fb063d50c997403143d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Change c2c3452ba introduced a new API in Qt to let QPA inform
whether or not shortcuts should be shown in context menus. This
was set to false by default, since by observation, this seemed to
be the most common behavior across platforms. The problem
is that it left no way for the application to override it; The
attribute Qt::AA_DontShowShortcutsInContextMenus simply doesn't work
when shortcuts are always off. And for some application, showing
shortcuts is not just a matter of look-and-feel, but also important
information to be able to use the application the way intended.
This patch reverts the behavior back to how it was in Qt-5.9, where
shortcuts where shown by default (except on macOS where we still keep
them off). It's no so much because the "always off" logic is wrong, but
because there is no (easy) way/work-around for an app developer to switch
them back on (until Qt-5.13, where a new API is introduced to fix the
situation: b1a9a77). And this lack of API can be a show-stopper for some
when upgrading from e.g 5.9 LTS to 5.12 LTS.
This downside of this patch, OTOH, is that it can cause more
change that what is normally wanted in a patch release. But out of
two evils, this is the best option. Those that wan't to hide shortcuts
can set AA_DontShowShortcutsInContextMenus to true, which now will
work.
[ChangeLog][QtWidgets][QMenu] Shortcuts are again shown by default
in context menus, except on macOS. They can be forced off by
setting AA_DontShowShortcutsInContextMenus to true.
Fixes: QTBUG-69452
Change-Id: Ibcc371395944ac5b19b1d20889940da271bf73d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Since change c808a6978b plugins.qmltypes and designer/* didn't
get copied anymore for a non-prefixed build. Fix this, and clean up surrounding
code.
Fixes: QTBUG-75682
Change-Id: Ic6de94a5b01dae08929a67cbaedde60d120a4807
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Including both qopenglextensions.h and qopenglcontext.h would cause
ambiguity for the compiler when using QOpenGLContext
Change-Id: If8e46741c86d7639f442b5ac05a4493da784eb2f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
