Since the first item in a treeview might be hidden, start from the
first visible item in the view when starting or wrapping round
during a keyboard search.
Task-number: QTBUG-63869
Change-Id: I202bea567c6d4484c3ffaf8a5f9af8ea2e13708d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This test became a real pain recently. A close look at the test shows
several problems (strangely enough, the failure can never be
reproduced on real machines, only on VM - Ubuntu and RHEL 6.6).
There are several asserts that are firing from time to time here and
there. They show that the logic in test is broken/incorrect. QNAM can
open several connections to a host, our test then incorrectly resets
its 'client' data-member and bad things can later happen after
'bytesWrittenSlot' executed (and deleted a socket). For example,
I can reproduce this scenario in every second run:
1. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s1)
2. incoming connection -> client = socket(descriptor), connect to
client's readyRead (s2)
QNAM sends a request on s1. We reply on s2 (which is already wrong)
and call client->deleteLater(), which resets client to nullptr.
If QNAM sends something else on s1, we hit assert(!client.isNull()).
To avoid this, whenever 'sender' in any slot is different from the
'client', we use the actual 'sender' to reply. Another problem is this
weird and rather cryptic waitForFinish which is not needed in this
particular test since we wait for reply error, not 'finished'.
As it happened before - it's not clear if these two problems
were the cause of guaranteed fails on CI - an integration failed
~10 times in a row in the same test (not happening anymore though).
Task-number: QTBUG-64569
Change-Id: Id9aa091290350c61fadf1c3c001e7c2e1b5ac8f4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Both ARM and x86 can convert fp16 much faster in bulk than one at a
time. This also enables hardware accelerated conversion on x86, when
F16C isn't unconditionally available at compile time.
This code is implemented in C to ensure that there's no leakage of
inline symbols from the .obj file that was compiled by Visual Studio
with AVX support. Unfortunately, simd.prf uses $(CXX) instead of $(CC)
for all its sources, which means the file gets interpreted as C++ by
g++, clang++ and icpc. Those compilers at least don't leak any symbols.
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I9d26d99e83392861fb09564e0e8e8d76cd8483b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tested with Clang, GCC 4.5 & up, ICC 17 and MSVC 2017. No current
version of MSVC supports C11 and GCC implemented the features slightly
later in C than in C++.
Change-Id: I57a1bd6e0c194530b732fffd14f45c5074c9a052
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When calling QTreeView::hideColumn() the row heights are not
recalculated. This can lead to rows which are unnecessarily high due to
hidden columns may contain large (e.g. multiline) content. The same
applies to showColumn() - there the row might be to small.
Hiding columns directly via QTreeView::header()->hideSection() is not
covered by this patch since QHeaderView has no way to inform about
newly shown/hidden sections.
Task-number: QTBUG-8376
Change-Id: I20b1198e56e403ab8cf649af76e5e2280821dd68
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
This test makes sure that we do not introduce a regression where the
threads exited the inner loop over the queue before the queue was
empty. This was triggered by calling tryTake at least maxThreadCount
times, which left the same number of null pointers in the queue
and caused the inner loop to exit too soon for all the threads.
Change-Id: I3a9d800149b88d09510ddc424667670b60f06a33
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Backport from 5.10 to 5.9 (LTS).
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 9c765522d1)
Change-Id: I58c53bdf43e0f19b4506f3696d793f657eb4dc6f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As it stood, we would set 'pressed' to false regardless of which button that
was released. This would end up wrong if pressing the left button, and
at the same time, did a click with the right button. This would clear the
flag prematurely, and cause a release signal not to be emitted when later
releasing the left button.
tst_QAbstractButton: adding autotest
Adding tests to simulate the bug report's cases:
1) left press button
2) click right/middle key
3) move mouse out of button's boundary
4) test if the released() signal triggered properly
Taks-number: QTBUG-53244
Change-Id: Ifc0d5f52a917ac9cd2df5e86c0475abcda47e425
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When looking for the primary index, it is possible that the
constraint_name in the all_ind_columns table does not match that of the
index_name. Whereas the index_name will match in this case, so the query
should set the where clause on the index_name in both tables.
Task-number: QTBUG-64427
Change-Id: I1bf1fb580e620b9f75f2fde1ecf408842e377365
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Looking at the failures in grafana it appears this test is also failing
on Windows 64. The same fix applies then, and we use Q_OS_WIN now.
Change-Id: Iafcfd6d1e747f3c816878cad072fbfae3aee19ca
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replaces the Qt Accessibility Windows back end, formerly based on legacy
MSAA, with a new implementation based on UI Automation. Fixes issues with
accessibility tools like screen readers and magnifiers, and with the
automatic showing and hiding of the virtual keyboard in touchscreen-based
Windows computers.
[ChangeLog][Windows] The Windows Accessibility back end, formerly based on
Microsoft Active Accessibility, was replaced with a new implementation
based on Microsoft UI Automation.
Task-number: QTPM-487
Task-number: QTBUG-53024
Task-number: QTBUG-43190
Task-number: QTBUG-61926
Task-number: QTBUG-38499
Task-number: QTBUG-38337
Task-number: QTBUG-38501
Task-number: QTBUG-38502
Task-number: QTBUG-38504
Task-number: QTBUG-38505
Task-number: QTBUG-38507
Change-Id: I20b4f8f5e938fef791c6e9c577fcd919140999bd
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
When parsing a date-time's zone, a stray Z denotes UTC (a.k.a. Zulu
time), despite not being a valid name for the zone. Clients parsing
such date strings had to treat the Z as a literal, rather than a
zone-ID, but then they got back a LocalTime instead of the UTC the
string actually described. So teach QTimeZoneParser to handle this
special case and adapt an existing test (that used a time ending in Z,
but had to treat it as a local time) to check this works.
[ChangeLog][QtCore][QDateTime] When parsing a time-zone, "Z" is now
recognized as an alias for UTC.
Change-Id: Ib6aa2d8ea2dc6b2da526b39aec74dbc007f90fd8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A source of constant confusion is the QFontMetrics::width() function,
which does not return the bounding width of the text, but the advance
width. We deprecate this and add horizontalAdvance() instead, to avoid the
confusion in the future.
Note that there was an internal width() overload which was only there
for the purpose of supporting the Qt::TextBypassShaping flag. This
flag has already been replaced by public API, so no such
overload is added. Instead, we deprecate the TextBypassShaping flag
as well, which makes sense, since a replacement has been made.
Also note that there was a consistency problem with QFontMetrics and
QFontMetricsF, which are supposed to be interchangeable. The
QFontMetrics::width() functions for strings took an optional int length
argument, while the floating point version did not. This error is
corrected in the advance() functions.
[ChangeLog][QtGui][Text] Added QFontMetrics::horizontalAdvance() and
QFontMetricsF::horizontalAdvance() to replace the confusingly named
width() function. The latter has now been deprecated.
Change-Id: I0dfda43aa65c8235be32c62fade82cae05b29c79
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows us to make sure that the PID we read is from the same boot
as we are right now running. The collision could happen on embedded
systems where the boot sequence is fixed, so all the same processes
would have the exact same PIDs after reboot as they did before.
[ChangeLog][QtCore][QLockFile] QLockFile can now properly conclude that
a lock file from a previous boot of the same device is stale and can be
removed. This is implemented only for Linux and Apple operating systems.
Task-number: QTBUG-63425
Change-Id: I0b48fc8e90304e0dacc3fffd14e8e3a197211788
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This allow retrieving the value of the known PMTU for the current
socket. This works on Linux (IPv6 and IPv4) and FreeBSD (IPv6 only) --
the other OSes don't have the necessary API.
Note: do we need add IP_MTU_DISCOVER?
Change-Id: I6e9274c1e7444ad48c81fffd14dcaf97a18ce335
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We document that -1 is not a valid value. The Windows structure's type
is unsigned, so the value is actually ULONG_MAX.
Change-Id: Ic632b4163d784b83951cfffd14f668645c4da3a9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The issue was introduced by eaee1209f0, so
it affected only 5.9.2.
[ChangeLog][QtCore][QSemaphore] Fixed a regression that would make
tryAcquire() not to wait forever if the timeout was a negative
value. Note: new code is advised to only use -1 to indicate "forever",
as some other functions taking timeout periods do not accept other
values.
Task-number: QTBUG-64413
Change-Id: I57a1bd6e0c194530b732fffd14f58fce60d5dfc9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
on Ubuntu_16_04 and openSUSE_42_3.
Task-number: QTBUG-64446
Change-Id: If8fff2823f041428852822470a2f00157795558b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This brings us to almost parity with the C++11 Random Engine API
requirements (see chapter 26.5.1.4 [rand.req.eng]). We don't implement
the templated Sseq requirements because it would require moving the
implementation details to the public API. And we don't implement the
<iostreams> code because we don't want to.
Change-Id: Icaa86fc7b54d4b368c0efffd14f05ff813ebd759
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we don't document how many bytes one needs (it's 2496), it's
difficult for the caller to provide just enough data in the seed
sequence. Moreover, since std::mt19937 doesn't make it easy to provide
the ideal size either, we can't actually write code that operates
optimally given a quint32 range either -- we only provide it via
std::seed_seq, which is inefficient.
However, we can do it internally by passing QRandomGenerator to the
std::mersenne_twister_engine constructor, as it's designed to work.
Change-Id: Icaa86fc7b54d4b368c0efffd14f0613c10998321
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Now only QRandomGenerator::system() will access the system-wide RNG,
which we document to be cryptographically-safe and possibly backed by a
true HWRNG. Everything else just wraps a Mersenne Twister.
Change-Id: I0a103569c81b4711a649fffd14ec8cd3469425df
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we're adding a deterministic generator that inherently does not
use syscalls, and people should really use that one by default, there is
no point in optimizing the secure generator wrt syscalls. Besides,
keeping the random data in memory for longer than needed is likely
inadviseable.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed0871117fe930
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
To obtain "proper" directory behavior, we have to check against the
extracted "resources" directory instead of its qrc counterpart.
Change-Id: I4996ba74419945f78d356ad953a5b826ff663687
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
To obtain the file's handle, we need to obtain it from the extracted
test data instead of qrc.
Change-Id: I89c5c3f3a7da7e36205a439581a6d83efffdc07c
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Resource files are extracted to m_dataDir in tst_QFile::initTestCase.
Instead of trying to access the file from the resource on systems that
use qrc for bundling the test data, we have to use the files that were
extracted at the beginning of the test.
Change-Id: I35453fbdeb27e317d1342ff1cb7bbea9cebea14d
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
On some platforms (like UWP) files that are copied during
qfile auto tests are not writable by default. The cleanup will fail for
these files if the permissions are not set accordingly.
Change-Id: Id925dcadfc6b505c87f1f55d5ea05e286b60a5a5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This patch works around Windows X86 on QEMU antics.
It appears on this platform the test behaves in some unpredictable manner:
- WSAConnect with 255.255.255.255 does not always immediately fail with
some error, so socket engine waits for a connection timeout (30 s.),
but the test itself
- only waits for 5 seconds and then tests that a request has finished with
error, which is not true (we are still connecting).
To make it work - whenever we have bearermanager feature enabled, set
a connection timeout to something reasonable, not 30 s.
Since we try to connect to each address twice, make timeout 1.5 s
(so it's 3 s. in total and still is < 5 s.).
Task-number: QTBUG-64264
Change-Id: I1d40c140667fca8402ec9344e66d313b6df54256
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtNetwork][QNetworkInterface] Added dnsEligibility() to
QNetworkAddressEntry to indicate whether the address is eligible or not
for publication in DNS or similar mechanisms.
Change-Id: Id3ae5f853d964358ac1ab19b525334a426e0e052
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtNetwork][QNetworkInterface] Added preferredLifetime() and
validityLifetime() to QNetworkAddressEntry that report the remaining
lifetime of the address in the network interface.
Change-Id: I292b84e2193979446e43344b0727642812cba630
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Blacklist ioHttpRedirectPostPut for Windows
- Amend 84396a3f93:
Keys need to be on subsequent lines
Task-number: QTBUG-62583
Change-Id: I6360ec7bd87de65a3294a0d22148f13579fcd292
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Similar to the problem found in QTcpSocket auto-test recently.
While the failure on CI looks differently (apparently, server process
starts but does not print anything), fixing the dependency does not
hurt and at least fixes the 'make check' scenario.
Change-Id: I8f29f3e492d22410533407a527f5fc8f664e7f5c
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This test was failing recently on Windows 7, mingw, x86. It's not
failing now and attempts to reproduce the failure on CI's VM were
unsuccessful. Anyway, just reading the code is enough to spot
race-conditions: two threads are accessing two shared boolean
variables without any protection.
It's unclear if these races were the reason why the test was failing,
but we fix them for good anyway. Also, a failure to start a thread
or to start listening on a TCP socket is not treated as XML-related
failure anymore and QSKIPped instead.
Change-Id: I5115ce6c33cafc91485f8cf6e7e268d954976556
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test contains Oracle specific queries and will fail for other DBMS.
Currently it doesn't fail, because it is skipped for drivers that doesn't
support BatchOperations and only QOCI supports batch operations.
Change-Id: I8f1e7c7244726fa11c841023dec186553747a6b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The milli-seconds since epoch value for an invalid transition is,
of course, invalidMSecs(), not invalidSeconds().
Added a comment while I was at it, explaining why we expect a
transition before the epoch, if such transitions are supported.
Change-Id: I0f376f9d69c0e6e79a309dc011943baa41175135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
We can use the D-Bus / systemd machine-id file (which is a UUID without
the dashes) on systems with D-Bus. On Windows, there's a value in the
registry that is filled when Windows is installed, like on Linux. For
BSD systems, the kernel has a UUID we can use too, so extract that.
Task-number: QTBUG-63425
Change-Id: I27eaacb532114dd188c4ffff13d32f2e3c1d74bb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While removing insignificant flag in commit
38a0909d4e and blacklisting
autotests that still failed, qtbase builds didn't
verify VS2017. That broke qt5 builds which do build VS2017.
Task-number: QTBUG-64264
Change-Id: I5fdfa5dac6192f449a05146a9a422e428a710c84
Reviewed-by: Liang Qi <liang.qi@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test is flaky on Unity due to regression introduced by QTBUG-39362.
Skip the test functions until QTBUG-39362 is resolved.
These test functions do not fail on Gnome and KDE, so the functionality
tested by check_cursorKeys* will be covered by other linux distributions
in CI.
Change-Id: Ifd1a7779a9728142424f4956dd6466c822ccde91
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Looks like I never even tested this. There were two problems:
1) when we asked for the recvmsg and sendmsg functions, we used the
wrong variable (socketDescriptor was still -1)
2) we extracted the destination addresses, but never set them in the
QIpPacketHeader object
The added tests confirm that this works on Windows, Linux, Darwin,
FreeBSD. There also seems to be a problem, obtaining the destination
address on an IPv4 socket with a dual-stack sender (I can reproduce that
on FreeBSD, macOS and Windows, plus an old version of Linux).
Task-number: QTBUG-63605
Change-Id: I638cf58bfa7b4e5fb386fffd14ea732bddbc0c42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Both of the new toolchains (armv7 + arm64) have some problems with d-bus
tests. Skip them until the toolchain has been fixed.
Task-number: QTBUG-60263
Change-Id: Ic300f419635fb6b49b3ea7f48fa76c19088c88bd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
If a window is blocked by a WindowModal dialog, it should not be
possible to trigger window shortcuts on that window if it receives
a WindowActivate event.
This currently happens if the blocked window gets clicked, because the
window becomes the active_window and then QApplication sends it a
WindowActivate event (this doesn't happen with application modal dialogs).
The correctWidgetContext() function calls QApplicationPrivate::tryModalHelper()
only if the shortcut context is ApplicationShortcut. This patch makes it
call even if the shortcut context is WindowShortcut.
Change-Id: Iff87d85bcae603a6a24128e0cedfa9d33b6485fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Currently, when two colors are equal except for their alpha values,
QCOMPARE produces the following failure message:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #ff0000
Expected (colorB): #ff0000
By using the HexArgb format instead of the default HexRgb, we can
see the full hex string, with alpha values included:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #88ff0000
Expected (colorB): #ffff0000
Task-number: QTBUG-55574
Change-Id: Id82c60a1b473ac6025a6f6ac560fce95a910d782
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test fails often and seems to be flaky.
Task-number: QTBUG-62583
Change-Id: Id3af283c89e392634a7af6e11bd05775a4295798
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This test starts two processes - server and client - and requires
an external executable ('stressTest'). In .pro file we have SUBDIRS
containing both 'test' (test itself) and 'stressTest' (client/server app),
but there is no explicit dependency and as result we run the test before
we build 'stressTest' thus failing to start those processes. This patch makes
'test' dependent on 'stressTest'.
Task-number: QTBUG-36629
Change-Id: I286b08bcff86b9afc4bbee87a75e887527eaf5f2
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Discussed during Qt Contributor Summit 2017. We concluded that we don't
want to make these functions public, as they do not follow Qt coding
style API. Specifically,
qStartsWith(a, b)
is not easily understood which argument is the needle and which argument
is the haystack (same problem memcpy() has). Compare that to
a.startsWith(b)
which can clearly be read in English as a subject-verb-object sentence.
This commit removes the unit tests that called compare().
Discussed-on: http://lists.qt-project.org/pipermail/development/2017-October/031060.html
Change-Id: Icaa86fc7b54d4b368c0efffd14ee6205eb9043fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now,this does really nothing. This commit is just to allow us to
transition the other modules (besides qtbase) to use the syntax that
will become the API.
I've marked three places to use the system CSPRNG:
1) the QHash seed
2) QUuid
3) QAuthenticator
I didn't think the HTTP multipart boundary needed to be
cryptographically safe, so I changed that one to the global generator.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ecf1938bd8ff61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add some helpers to convert the coordinates and change the code to use the
QWindow-based mouse test API. Remove mouse presses on the second and third menu
from task256322_highlight() since moving the mouse is sufficient to switch
menus.
Remove blacklisting/skipping of macOS and offscreen.
Task-number: QTBUG-63988
Change-Id: If3e94170d11df369aec199d13d54d39382a78723
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Neither the exit crash of QTBUG-21102 nor the Windows failure of
QTBUG-24226 appear to be reproduceable.
Add verbose error reporting to getErrors() and blacklist
getErrors:ftp-host which has been found to fail with timeouts
on Linux and ioHttpRedirectMultipartPost.
Task-number: QTBUG-21102
Task-number: QTBUG-24226
Task-number: QTBUG-62860
Change-Id: I6b29f6184e83de8ffebf6ff0d80606512dca6419
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It fails for me on Windows 10. Therefore, this is wrong.
FAIL! : tst_QHostInfo::initTestCase() 'networkSession->waitForOpened(30000)' returned FALSE. ()
S:\qt\qt5-msvc2017-x64\qtbase\tests\auto\network\kernel\qhostinfo\tst_qhostinfo.cpp(194) : failure location
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed5691472a4760
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Open failures due to sharing violations have been observed in Coin.
Change-Id: If7fbe01a454b3c343c0b87f73db50c28eae901c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Guard the FILE * obtained by fopen() by a RAI class ensuring
the file is closed on destruction.
Change-Id: I9297f91ca2120238f3a44bad92bca5f920e01aa8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
... the same way other tests do in this file.
Change-Id: Ifcaee084bd20c55d6b9f7ddcf35daebce2a02e07
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There were a couple of corner cases where doing setPort() would result
in QUrl thinking that an authority was not present. Since the full URL
parsing implies that a host is always present if the authority is
present, then we also imply that setting the port number makes the host
be present too.
Change-Id: I69f37f9304f24709a823fffd14e67c12da18d69f
Reviewed-by: David Faure <david.faure@kdab.com>
1. Recently we have updated our receive window size to a larger value.
Unfortunately, this also results in auto-test pumping through
more data, which probably takes more time on CI.
At the moment we do not have any public API on QNAM's level to
customize HTTP/2 parameters (aka 5.10/FF and so on). So we use the fact
that QNAM is QObject and we can set a property on it. This property
is our Http2::ProtocolParameters object that allows us to configure:
- HPACK parameters (in 5.10 - noop)
- session receive window size
- different SETTINGS as described by RFC 7540, 6.5.2.
2. Undocumented environment variable to set ENABLE_PUSH is not needed
anymore.
3. In 5.11 Http2::ProtocolParameter will become a public API
and we'll introduce a new setter in QNAM.
Change-Id: If08fd5e09e7c0b61cf9700b426b60b5837b6b2e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Ensure windows are cleaned up. Add scaling where native coordinates
are used.
Task-number: QTQAINFRA-1440
Change-Id: Ie080ff780c687418f4dc5d71fd49112486b217e6
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Currently on Windows, the Next button's shortcut doesn't work, because
QWizard overrides it with an empty key sequence.
The key sequence should be changed only if isVistaThemeEnabled() returns
true.
Task-number: QTBUG-46894
Change-Id: I54f26388b167973cc8065a867d9e771c1e6a2a72
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
c4cf90b1f7 made POST requests be
redirected properly, but this wasn't enough and should have included
every method/verb.
Change-Id: I37b12dc9fdffcbf2aadbd2360d4fc2584c024939
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QAction::setData() always emits changed() even without actual data change.
Original code lacks a guard to check if the data changes.
According to http://doc.qt.io/qt-4.8/signalsandslots.html,
adding guard also benefits to prevent infinite looping in case
of cyclic connections.
Task-number: QTBUG-62006
Change-Id: I776369b668082f9f02e4502a36b1ae234ee7e079
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We have found that there are three important operations
when it comes to menu creation and putting it up in the
native menubar:
* Adding the action to its parent menu
* Setting the submenu as the action's menu
* Populating the actual submenu
This application tests all possible permutations for these
three operations, starting from the menubar and down two
more menu levels.
Two command-line options allow, first, to create a late
menubar that will replace the original menubar from the main
window form (--new-menubar) with, second, the option of
creating it parentless (--no-parent) before setting it as
the new main window menubar.
While mostly interesting for platforms supporting QPA menus
and menubars, this could be useful as a trivial check for
QMenu and QMenuBar in a pure QWidget environment.
As of today, the application shows at least three issues on
macOS which will be fixed in upcoming patches.
Change-Id: Id3c1e0f346c6fe27ab4656ff045b88a0a8623740
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The previous version was good, just not optimal. Because the input was
an unsigned 64-bit number, compilers needed to generate extra code to
deal with HW instructions that only convert 64-bit signed input. And
that was useless because a double uniformly distributed from 0 to 1 can
only have 53 bits of randomness.
The previous implementation did exactly what the Microsoft libstdc++ and
libc++ implementations do. In my opinion, those implementations have an
imperfect distribution, which is corrected in this commit. In those, all
random input bigger than 0x20000000000000 has a different frequency
compared to input below that mark. For example, both 0x20000000000000
and 0x20000000000001 produce the same result (4.8828125e-4).
What's more, for the libc++ and MSVC implementations, input between
0xfffffffffffff001 and 0xffffffffffffffff results in 1.0 (probability 1
in 2⁵³), even though the Standard is very clear that the result should
be strictly less than 1. GCC 7's libstdc++ doesn't have this issue,
whereas the versions before would enter an infinite loop.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14eced3c375dd2ec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The path wouldn't match if the cookie's path was root ('/') and the
URLs path was empty.
Change-Id: I6dcd10f1fdf4f48f14e50f1b169cbdfda7005849
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We need to ensure that simultaneous touch and tablet input is possible.
Change-Id: I0c0d06e382b6b89e11ed06c1e4ad0db63b3b7c82
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Before this patch a very accurate drop position below
or above an index was needed. Therefore it was not that
easy to do.
This patch increases the above/below area to be about
18% of the item (still leaving the most space for the item).
An average user will likely be 2-3x faster with dropping
below or above (while not losing much when dropping on items).
[ChangeLog][QtWidgets][ItemViews] Made it easier to
drop above and below items.
Change-Id: I47f0f80c76878c17ebf3f93d0a0cc82755971c2a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Proximit events are sent to the QGuiApplication, catch them via
event filter.
Change-Id: I7f896e7d9f5c90347b9e3c708feb69abd1c5fc95
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
[ChangeLog][QtNetwork][QHostAddress] Added isGlobal(), isLinkLocal(),
isSiteLocal(), isUniqueLocalUnicast(), and isBroadcast() classification
functions to complement isLoopback() and isMulticast().
Change-Id: I3868166e5efc45538544fffd14d8fca6e9042c04
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
All POST requests that were redirected would previously turn into GET
requests. This does not follow the standard for HTTP codes 307 and 308.
Task-number: QTBUG-63142
Change-Id: Ibd25a9566066e589670a9bc34e5dc5111f8139d5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In some cases when a session isn't needed (i.e. for localhost), the
session is not opened at all. If a program (e.g. our tests) redirects
from localhost to a different system (e.g. the qt network test
servers, or the internet) it will wait for a session forever. So, we
need to check if a session is needed for the redirect-target and then
open one. It is usually opened in
QNetworkReplyHttpImplPrivate::_q_startOperation
Change-Id: Id3b78182a3fb3f63f0235ecb1fb665df8bd0c4ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 542e11ab2b)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 1af927976a)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We already cleared 'cookedHeaders', which is a QHash for 'known headers'
(enumerators as keys instead of strings), now do the same for 'rawHeaders'-
not to end up with some weird mix of headers from all possible redirect
responses and the final response.
Task-number: QTBUG-61300
Change-Id: Ifd6655c4167840bb00d29446d36ce65ba2d5491a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few tests would QSKIP depending on the inclusion of SSL, producing
multiple lines of noise in the output.
And one test used https in one of its configurations without checking to
see if it could, causing an UnknownProtocolError.
Change-Id: I5f54bf1005f962cc027c099b816fbe245dc43d3f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QStandardItemModel::setItemData replaces the content of an item data
with the new values rather than updating/inserting which is
the behavior for QAbstractItemModel. This patch aims to unify the
behavior.
[ChangeLog][QtWidgets][QStandardItemModel] Fixed setItemData()
incorrectly deleting unmodified data. That behavior is not
following QAbstractItemModel's documented behavior which is
no modification of data not provided in parameter.
Task-number: QTBUG-45114
Task-number: QTBUG-10872
Change-Id: I2be40cee372b68d9f71c976548ecda6dc3011241
Reviewed-by: David Faure <david.faure@kdab.com>
On macOS, absence of a QPA menu means that we should be using our
own internal logic since there's no entity on the QCocoaMenuDelegate
to take care of the shortcuts.
Change-Id: I35ed8f0b55445f61d0528709d4debb636a502002
Task-number: QTBUG-61039
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We were using the default ones, provided by RFC7540. It appears they are way
too restrictive and conservative: when downloading something relatively big,
a stream keeps spending the whole session/its own 'recv' windows and thus
we have to constantly send WINDOW_UPDATE frames. This significantly slows
down our HTTP/2 implementation, making it orders of magnitude slower than
HTTP/1.1. To fix this:
- We send SETTINGS_INITIAL_WINDOW_SIZE in the first SETTINGS frame
to inform our peer that per-stream WINDOW is bigger than 64Kb
- We increase the session's receive window size.
Task-number: QTBUG-63722
Change-Id: I31312fcfd5f0fc0aee6aaa5d3562cc7d1b931adc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Error out if it's missing or broken (Mersenne Twister not present).
This ensures that we never have a low-quality random generator in Qt.
Change-Id: I0a103569c81b4711a649fffd14ec80649df7087e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... so that it comments the actual code, not what this code was before.
Change-Id: Ib191b9d7bd3ae3cda39a15f0f711cb1dd3c5c2b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On some systems (e.g. Debian/buster) a standard Qt package may install
a qtlogging.ini file, e.g. in /etc/xdg/QtProject/, which suppresses
QDEBUG output. A ~/.config/QtProject/qtlogging.ini could interfere
similarly. This can break the selftest, when run with expected_*
files generated without such interference. Likewise, if those
expected_* files are generated on a system such similar, they won't
work on CI. Given that this caused confusion and delay with
integrating the latest set of updates to the expected_* files, it
seemed best to save others from similar bafflement.
So set a standard value for QT_LOGGING_RULES in both the selftest and
the generator script, so we get consistency.
Change-Id: I649e2f1f6ead21edf8af051aaee286e369fed064
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
In selftests.qrc, imposed alphabetic order (on stem of name, then on
suffix, effectively treating . as sorting before any letter) while
removing old tests and adding new tests and data. Updated all non-csv
files and added many missing files. (Not clear on csv support status;
the script seems to have dropped it after 5.6, but the test still uses
it.)
Left expected_crashes* alone (no new files added, no update to old) as
I don't get results resembling those anticipated.
Omitted printdatatagswithglobaltags, printdatatags due to dangling
hspace on output lines, which upset sanity-bot. A change to the test
cpp is needed to make it viable to skip that dangling hspace.
Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The TIMESTAMP type has been available in Oracle since Oracle 9i
which was released in June 2001 and contains more data than the
DATE type so it can be reliably used for the related data types.
This adds support for preserving milliseconds and the time zone
information if this is passed or in the database.
[ChangeLog][QtSql][OCI] Added support for the TIMESTAMP data type.
Task-number: QTBUG-23
Change-Id: Icf7a012dda75fb342ce6c6aa34eaa2a52755ff2d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit ba1b73175b tried
blacklisting this autotest in Windows 7 only. This however
does not work. We can't pin point blacklisting to a specific
Windows version.
Task-number: QTBUG-63122
Change-Id: I5edb5b56fd86ad194214818a838db9cfd6be2ad1
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest has been blacklisted already in RHEL 7.1
and RHEL 7.2. This one extends it to 7.3 and 7.4.
Task-number: QTBUG-52523
Change-Id: I3e2d8cd882d9f7dc58a65bde88e3aa16438b13c3
Reviewed-by: Simo Fält <simo.falt@qt.io>
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We're not going to crash to avoid core dumps getting recorded by
systemd, filling up filesystems or showing dialog boxes. We just need to
exit without running destructors. Now, exit() isn't supposed to run
function-scope destructors, so just in case we use _exit().
Change-Id: I0b48fc8e90304e0dacc3fffd14e909ff248ce1a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This makes qtestlib behave more like real Qt applications with an
event loop, where exiting the application does indeed flush deleteLaters.
And since every test method is supposed to be independent from other
test methods, we should even cleanup between tests.
For "app less" tests, no flushing happens.
Real life use cases:
* A unittest for some code (e.g. KIO job) which uses a socket, runs an
event loop until the socket communication is done, and ends. However
slotDisconnected() does, as recommended, socket->deleteLater(). So the
test finishes before the socket has a chance to actually get deleted,
and memory leak tools flag a memory leak, which doesn't actually happen
outside the unittest.
* Deleting a QWebEngineView with deleteLater is even worse than a memleak,
it leads to an assert (from a global object destructor) in QtWebEngine
if the view deletion hasn't actually been processed.
Change-Id: I18fc822fd26988a0fa4e75313c1947fcaa7d9e56
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits aba336c2b4 (in Qt 5.2) and
aba336c2b4 (in 5.6) both tried to deal
with this problem, with different levels of success. This is the third
attempt (and hopefully the charm).
Instead of modifying the path that the user provides, go straight ahead
and declare it invalid. This is supported by RFC 3986, which declares
this expansion impossible:
relative-part = "//" authority path-abempty
/ path-absolute
/ path-noscheme
/ path-empty
path-abempty = *( "/" segment )
path-absolute = "/" [ segment-nz *( "/" segment ) ]
path-noscheme = segment-nz-nc *( "/" segment )
The "path-abempty" and "path-noscheme" cases are the two issues we
already handle. This commit adds the third one: path-absolute, which
requires that the first segment of the path be of non-zero length.
That is, it is now possible again to have http://example.com//path
constructed piece-wise, without it producing http://example.com/path.
Additionally, it catches the case of http://example.com//path parsed
from full URL then followed by setAuthority("").
Change-Id: I69f37f9304f24709a823fffd14e67a5e7212ddcd
Reviewed-by: David Faure <david.faure@kdab.com>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test tst_QXmlSimpleReader::inputFromSocket() is failing with
"QTestLib: This test case check ("(((server->listening)))") failed
because the requested timeout (5000 ms) was too short, 11700 ms would
have been sufficient this time".
Increased the timeout, since it's better to wait than to fail.
Task-number: QTBUG-63539
Change-Id: I804549648ea834e41d3c87871f5bab90f209385c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can't qWaitForWindowExposed on native menu bars. Other test
functions in this file are already disabling the native manu bar.
Task-number: QTBUG-24326
Change-Id: Iecf907ca84589159417d0d942c911485a41af164
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A "compound widget" is a widget that has a focus proxy set to an inner
child. This is normal for complex black-box components where focus handling
is delegated to the children. Since the compound can have several
children, a local tab order might exist between them.
The current implementation of setTabOrder had no idea about
compound widgets. As such, when connecting two compounds in the
tab chain, it would just break up their inner tab order and
cause tabbing to ignore children other than the proxy.
The new implementation recognizes compound widgets, and add some
extra code to figure out the correct tab targets. This way, the
local tab order between the children will be preserved.
This implementation was inspired by the patches of Marek Wieckowski posted
in the linked bug report, and later modified by Nikita Krupenko.
[ChangeLog][Widgets] QWidget::setTabOrder() will now preserve the local
tab order inside a widget if it has a focus proxy set to an inner child.
Task-number: QTBUG-10907
Change-Id: I0673d39d70ec8c6bf64af30bf978d67c651b2f3c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The original test was using QSslSocket::waitForEncrypted function, which
is apparently a bad idea on Windows: connecting to 'www.qt.io' we have
to verify certs and there is no guarantee a given Windows VM has the required
CA certificate ready in its cert store. In such cases we start a background
thread (aka CA fetcher's thread) and it calls a (potentially blocking for
a significant amount of time) function (CryptoAPI). When finished, this
thread reports the results via queued connection, which does not work
if we are sitting in a tiny-loop inside waitForEncrypted. Re-factor
the test to use signals/slots and a normally running event loop.
Also, the last test makes a wrong assumption about Windows - fixed.
Task-number: QTBUG-63481
Change-Id: I4abe9cda2a6c52d841ac858cccb6bf068e550cb8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWindowContainer assumed that a widget could never change from
native to non-native. This is not a fact when the window container
is reparented to toplevel and back. In this case, usesNativeWidgets
would be stuck at true, and parentWasChanged() would go down the
native widget path, triggering an assert.
The solution is to always recalculate the usesNativeWidgets bool.
Task-number: QTBUG-63168
Change-Id: I88178259878ace9eb5de2ee45ff5e69b170da71c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Swapping from RHEL 7.2 to 7.4 produces new autotest failures.
Task-number: QTBUG-63433
Change-Id: I3e59aa73b5874cfec06e166f521e06b0c7829743
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This avoids looping prior to the main 16-byte loop, by performing one
load that may include bytes prior to the start of the string. This is
guaranteed not to fault, since str points to a valid character, but it
may cause Valgrind to print warnings.
Change-Id: I6e9274c1e7444ad48c81fffd14dcae854bba24b2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By the time we call setKeyboardMode(true), the menu may
already have taken focus. This change sets keyboardFocusWidget
before opening the popup, and makes sure that keyboardFocusWidget
is not set to the popup. (We cannot remove the assignment from
setKeyboardMode(), since it's called from several places.)
[ChangeLog][QtWidgets] Fixed widget losing focus after showing
menu second time.
Task-number: QTBUG-56860
Change-Id: Ic01726bf694e6f365dd7b601ad555156e0fdf6c5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
"generate" is better than "get", and we already have "generate(it, it)"
which uses std::generate(). This changes:
- get32() → generate()
- get64() → generate64() and QRandomGenerator64::generate()
- getReal() → generateDouble()
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d7bd69abcdb3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Due to the complex event forwarding logic between QCompleter,
QComboBox, QLineEdit and QWidgetLineControl, in some cases the
same single user return key press could result in duplicated
activated() signals being emitted by QComboBox. The first one
would be emitted because QLineEdit emitted editingFinished()
as a result of QCompleter::eventFilter() having forwarded the
return key press event to QComboBox. The second one, would
happen right after, as QCompleter::eventFilter() would process
the same event on behalf of its popup.
(We recall that QCompleter is installed as its own popup event
filter. That's also the case for the completer's widget, although
the purpose there is limited to focus-out events).
The current fix consists on skipping the emit as a result of
QLineEdit::editingFinished() if the completer's popup is still
active. For this to be accurate, it helps to test whether the
completer's popup is visible, so we will not be hiding it in
QWidgetLineControl::processKeyEvent() anymore. Indeed, we know
that if the popup is visible, that means that processKeyEvent()
was called after being forwarded by the completer's popup event
filter. Furthermore, the popup will be hidden by its event filter
shortly after it returns from said event forwarding call.
Based on a patch by Alexey Chernov <4ernov@gmail.com>.
Task-number: QTBUG-51858
Task-number: QTBUG-51889
Change-Id: I013f6c3000ae37b5b0ec20eaf5cf7746c9c903e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Commit 12c5264d9a fixed the calculation of
SHA-3 in QCryptographicHash: we were previously calculating Keccak.
Unfortunately, turns out that replacing the algorithm wasn't the best
idea: there are people who need to compare with the result obtained from
a previous version of Qt and stored somewhere. This commit restores the
enum values 7 through 10 to mean Keccak and moves SHA-3 to 12 through
15. The "Sha3_nnn" enums will switch between the two according to the
QT_SHA3_KECCAK_COMPAT macro.
[ChangeLog][Important Behavior Changes] This version of Qt restores
compatibility with pre-5.9.0 calculation of QCryptographicHash
algorithms that were labelled "Sha3_nnn": that is, applications compiled
with old versions of Qt will continue using the Keccak algorithm.
Applications recompiled with this version will use SHA-3, unless
QT_SHA3_KECCAK_COMPAT is #define'd prior to #include
<QCryptographicHash>.
[ChangeLog][Binary Compatibility Note] This version of Qt changes the
values assigned to enumerations QCryptographicHash::Sha3_nnn.
Applications compiled with this version and using those enumerations
will not work with Qt 5.9.0 and 5.9.1, unless QT_SHA3_KECCAK_COMPAT is
defined.
Task-number: QTBUG-62025
Discussed-at: http://lists.qt-project.org/pipermail/development/2017-September/030818.html
Change-Id: I6e1fe42ae4b742a7b811fffd14e418fc04f096c3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The comment was back-to-front on the meaning it needed to address; and
the #if-ery used a deprecated define, now changed to match what
sanity-bot asked for.
Change-Id: I0a971ab2e405e5908066da86964d67c8b852f114
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63262
Change-Id: I216985e81d1c1cb3528fd8a005be48cad2a31ab7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63260
Change-Id: I3e83bcb0dbbe4fbf9d5c16f764fbeeca2b52d10c
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
When focus is put back onto an itemview and the current item is editable
then the WA_InputMethodEnabled attribute should be set. Likewise this
should be set/unset when the current index changes too, depending on
whether the index is editable or not.
Change-Id: Iaea075e669efd21bdaa89a49c500c449272d098b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iffb81a37a517e58d48757d82f93f20e8c5100033
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In preparation to move the code into QTestLib proper.
* Move to PMF-based connect() statements
* Remove a bunch of commented out code
* Streamline the logging of debugging / warnings, use categorized logging
Change-Id: Iec0872b63959decce49487762472c9a82bcc9fa1
Reviewed-by: David Faure <david.faure@kdab.com>
For self-consistency with QSharedPointer and minor consistency
with std::unique_ptr (although QScopedPointer isn't movable, so we
can't claim STL compatibility with it).
[ChangeLog][QtCore][QScopedPointer] Added get().
Change-Id: Ib58f936afa0e0d5bce57a61d1467b69956f37ceb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In data(), index belongs to the proxy, not to the source. It needs
to be mapped back to it first.
Change-Id: Ie5dcbf13166dadf62f3d85b594d3227383132521
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We don't need to bother the network test server with a TCP SYN packet.
All we need is for the local operating system to figure out the IP
address it would use to send a packet to the test server. We can do that
with QUdpSocket.
Also, the network test server hasn't been called "fluke.troll.no" for
almost a decade.
Change-Id: I209fcd5dbc2b4e5381cffffd14df65ccc7133247
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Performance is more important in this case than the theoretical benefit
of constexpr. This commit implements the SSE2 search for 16-bit null and
it might be possible to implement the equivalent for AArch64
(investigation required). It also adds a fallback to wcslen() for
systems where wchar_t is short (non-x86 Windows or 32-bit x86 build with
-no-sse2).
We can re-add the constexpr loop once the C++ language has a way of
overloading constexpr and non-constexpr. GCC has a non-standard way to
do that with __builtin_constant_p, which is also implemented in this
commit, but note that the inline function is still not constexpr.
Change-Id: I6e9274c1e7444ad48c81fffd14dcaacafda5ebdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some valid UTF-16 characters cannot be expressed in XML 1.0 and a
QString may contain invalid unicode. In both cases we should not write
the respective data to the output stream, as that generates invalid XML,
which then cannot be read back by QXmlStreamReader. In addition we
should report an error if we encounter them.
The change filters the incorrect strings from the output and introduces
an "encodingError" flag which is reported from hasError().
[ChangeLog][Important Behavior Changes] Characters invalid in XML, such
as 0x0 or 0xfffe, as well as strings containing unmatched UTF-16
surrogates are now suppressed from the output of QXmlStreamWriter and
cause the error flag to be set.
Task-number: QTBUG-63150
Change-Id: Ia29bab768fed9681dd68e8934da2a7e3fcdfc3cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When scrolling to the bottom of the view, if there are expanded items
then it should call canFetchMore/fetchMore up the chain until it
finds one with more items that can possibly be retrieved.
This brings it in line with the QAbstractItemView implementation
which would call canFetchMore on the root index, therefore we
go up the chain to the root to see if anything before that can be fetched.
[ChangeLog][QtWidgets][QTreeView] QTreeView now calls canFetchMore and
fetchMore when the bottom of the QTreeView is scrolled to.
Task-number: QTBUG-48725
Change-Id: I2b2145684bb34c8c317bfce4a0ef14f243a64719
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QMacAutoReleasePool is backed by an NSAutoreleasePool, which documents that
"you should always drain an autorelease pool in the same context (invocation
of a method or function, or body of a loop) that it was created".
This means allocating QMacAutoReleasePool on the heap is not a supported
use-case, but unfortunately we can't detect it on construction time.
Instead we detect whether or not the associated NSAutoreleasePool has been
drained, and prevent a double-drain of the pool.
Change-Id: Ifd7380a06152e9e742d2e199476ed3adab326d9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Teach our MiniHttpServer to better handle POST and PUT requests:
read the POST/PUT data too (not headers only), before replying
and flushing. The original comment says MiniHttpServer does
not support POST/PUT requests, it's not true anymore - we can
handle them (perhaps the simplest/shortest ones).
Task-number: QTBUG-62844
Change-Id: I80260f8ede1bb1b0b9d6042ecd59558bb7e9a998
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They aren't used in the API, so let's stop wasting library size.
Change-Id: I6e9274c1e7444ad48c81fffd14db247ecf825a57
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
