Data in item models is most often organized in rows, where each column
contains an attribute of the item represented by the row. Often when
sibling is used, it is to request another piece of data from the same
row. Having a specialized version makes this easier and less awkward
to do, simplifying
auto sibling = index.sibling(index.row(), columnOfInterest);
to
auto sibling = index.siblingAtColumn(columnOfInterest);
For symmetry reasons, siblingAtRow(rowOfInterest) was also added.
Change-Id: Ib203b2cdb16154cbb2680d16fb5c6a7538f33d07
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
The template clause was missing in the \fn command for
a member function of a template class.
Change-Id: Ie1a8f8372d3183f05f02e518b363a7bac735abbb
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The class qualifier was missing in the \fn command for
the move copy constructor.
Change-Id: Ia3633efde155ed19ac8460d760a5248e52097ea1
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
A few \fn commands were missing the template clause now
required by clang-qdoc. This update adds the template
clauses. It also changes an instance of Q_QDOC to
Q_CLANG_QDOC.
Change-Id: I2850d43d98debb80e01c36a524e0c00651a89298
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Some options only make sense if the printer has installed some extensions, e.g.
we should not shown "Staple" options if the Stapler addon is not installed,
so with this change we use ppdInstallableConflict to know whether an option
should be shown to the user or not.
Change-Id: I5733e1ac8b667c26b292aeafc90a10c155b751a4
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Previously it was a bit awkward to use, you had to do
QStringList cupsOptions = QCUPSSupport::cupsOptionsList(printer);
QCUPSSupport::setCupsOption(cupsOptions, option, value);
QCUPSSupport::setCupsOptions(printer, cupsOptions);
now you simply have to do
QCUPSSupport::setCupsOption(printer, option, value);
Change-Id: Id31583f1ec72644791d82776debbae5583a2be54
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
According to CUPS maintainer it is recommended to not show them[1].
GTK and Libreoffice behave like that.
[1] https://lists.cups.org/pipermail/cups/2015-September/027124.html
Change-Id: I82614003490554d41e38a125d44e3a599c2e7342
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Previous behavior:
* Open, change setting, cancel, open again, setting was as originally (i.e. unchanged)
* Open, change setting, accept, open, change setting, cancel, open again, the setting would be as before pressing cancel
* Open, change setting, accept, open, press cancel without changing anything, print, the initially changed setting is not applied
New behavior:
* Pressing cancel just cancels the changes since you opened the dialog, everything you accepted previously stays correctly selected
Change-Id: I483647504682f26d3d21c5229cc6530bf14fe519
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
First steps towards a public API for having multiple output sinks is
to allow this internally.
We give all the different log sinks the same signature, with a bool
return value to signify if stderr has been handled.
The logic of not logging to the alternative sinks when the function
qt_logging_to_console() returns true has been moved into each sink,
so that they in the future may choose to log even when also logging
to the console, allowing multi-sink output. They must then make sure
to return true if the native logging sink has also logged to stderr.
The logic of each sink has been kept the same when it comes to the
formatting of the message. Some of these sinks should ideally use
the raw message instead of the formatted one, as they are structured
logging sinks.
Change-Id: I441d3bc1db3e16180704e00d13a40564b6f06a6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Structured sinks such as systemd should capture each piece of information
individually, not bake it into the message via the message pattern.
Change-Id: I164c043683f123764a5445dc9faad049e25fd738
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Apparently this (undocumented) TESTDATA feature creates resource files,
but lets you use wildcards as well, which is very handy.
The reason I didn't know/realize this when adapting the tests to use a
".qrc"-file* was because some of the test-cases were using relative
paths instead of the 'testDataDir' variable.
This commit fixes the remaining uses of relative paths, removes a
usage of QDir::setCurrent, and adapts QSslSocket to use TESTDATA.
* in now-reverted commit e1600c1a73
Change-Id: Iee6d88f1e0810eeaadac90e7d44bc6db84bfeabf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The workaround was needed in older versions of MinGW-w64 headers that
did disable some common functions for -std=c++1z. Anyhow, this is not
reproducable anymore with any recent MinGW-w64.
Change-Id: I8e34a2e055f8e2356696dd4fe131a757c1527574
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Removed unneeded \fn commands from two qdoc comments and
moved one of the comments to the file where its function
definition is located.
Change-Id: I4c4371f0541d2995398b0d32e1df409433061226
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
We seem to induce QCoreTextFontEngine to draw text the
wrong way in non-native QMenu popups. Here, we just
delegate menu items' text rendering to AppKit.
This is only a workaround pending a proper fix or better
understanding of the aforementioned issue.
Change-Id: I71088ebe2a534bebca2ad396b1ea6754be093f55
Task-number: QTBUG-65653
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-46857
Change-Id: Ie323798df09cdbebc67eb617a7e0ec4c66cb2357
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Remove usage of outdated header.LGPL21 and replace those with proper
one (header.LGPL in src, header.GPL-EXCEPT in tests)
Change-Id: Ia4d1c0d84b77f09787fe7c30670747a1fe2aff29
Reviewed-by: Liang Qi <liang.qi@qt.io>
This removes the need to install an event filter on qApp just for this.
A similar thing was done with setPalette to reduce the number of event filters
in e.g. SystemPalette and Quick Controls.
[ChangeLog][QtGui][QGuiApplication] Added fontChanged signal
Change-Id: Ifa843aa42b91ac63ab17c3b064ac0e764aac77d3
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Use the constructor taking a string and convert number unless
it is -1.
Change-Id: I18d1ba2c8e0d3f4af01b7955863967f75051746b
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
To avoid the silent exits and potentially dangerous output values, the
caller must supply the correct parameters on input.
Change-Id: Ia9c56940adbf4ad34605a002dfc5c86b32c4658c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Original documentation commit included unresolved link target names.
This fix replaces them with the actual OpenGL function names.
Change-Id: I36a24eb237ef35d7207f3bae0771dc96476d7b19
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Move the modeltest autotest in the right place, and fix the
other autotests that were using it to use the version now in QtTestLib.
Change-Id: Ic6838945f616d580f357c872ce0956c341be3b16
Reviewed-by: David Faure <david.faure@kdab.com>
The referenced static meta object for the superclass might be in a
different DLL. In this case, the whole QMetaObject can't be initialized
all via preinitialized data in the data section of the binary, but must
run code at runtime to fill in the value of the dllimported pointer.
In these cases, both GCC and MSVC initialize as much as possible statically,
while only filling in the dllimported values (QMetaObject::d::superdata)
at runtime. Clang, on the other side, initializes the whole struct
at runtime if some part of it needs runtime initialization, leaving
the struct completely uninitialized before constructors are run.
In C++, there are no guarantees for in what order constructors in
different translation units are executed. This in particular means
that there are no guarantees as to whether qRegisterWidgetsVariant()
in qwidgetsvariants.cpp runs before or after the runtime initialization
of QWidget::staticMetaObject.
With GCC and MSVC, this doesn't seem to have mattered since only the
superdata pointer of the staticMetaObject was uninitialized - everything
else was initialized, and the superdata pointer doesn't seem to be
accessed during qRegisterWidgetsVariant.
With clang, the whole staticMetaObject is uninitialized, unless the
staticMetaObject has been initialized before (and the initialization
order is undefined).
By setting a manual priority (which is a GCC extension that also
clang supports) for the staticMetaObjects, we can be sure that
these are initialized before the actual explicit constructor
invocations (without any explicit initialization priority) that
can access the staticMetaObjects.
Change-Id: I64a82f12d690528567509791bae088b6304e189b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QHeaderView::visualIndexAt() did not calculate the correct position in
right-to-left mode. This lead e.g. to missing vertical grid lines in
QTableView/Widget when scrolling horizontally.
Change-Id: Ia50e5cfd7830a6ad8abd17ff79d9fbb33dc4097c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove some c-style casts from int to uint which were needed in Qt3 (or
earlier?) but nowadays the values are all int.
Change-Id: Iecd739c450873adf952a17f635d7fb6825537907
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
As the HANA ODBC driver does not provide scrollable
results per default, the connection has to be established
with a specific option.
Change-Id: I14751a94f61d6fffd6d56c39076c24ec4d1f88ef
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joachim Puhr <jpuhr@gmx.de>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
AKA the model tester, living in QtTestLib now.
Underwent some significant refactoring from the original modeltester:
in particular, it will stop testing illegal indices.
[ChangeLog][QtTestLib] Added QAbstractItemModelTester, a class
to help testing item models.
Change-Id: I0e5efed7217330be11465ce3abb3590f3f2601a4
Reviewed-by: David Faure <david.faure@kdab.com>
Change the condition to strong equal, as 'bytes' was checked against
wrong value on the start of the function.
Change-Id: I4ec4768b9fff3292af233417c4a5862d72d4eeac
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
There were several problems that i've fixed in a single commit since they are very interwinded
* The dialog used QPageSize::Custom for two things, the custom sizes coming from
the printer and the "user can write whatever size they want" size. Now only
the printer custom sizes use QPageSize::Custom and we use m_realCustomPageSizeIndex
for the "user can write whatever size they want" one.
* The dialog stored the QPageSize id as the combo userData, that doesn't work
when the printer has multiple custom sizes since they all share QPageSize::Custom
so now it stores the QPageSize itself
Task-number: QTBUG-58733
Change-Id: Ie640a07bb5e24b753db83c091c836e8af4ff126c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We need to update the printer output format and the current print device
when changing the printer so that if the user opens the properties dialog
for that printer it reflects correctly the selected printer.
Change-Id: Ib6767a74b74b8eebe43ff17006b6105c483a08b6
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
No need to call PQgetvalue() before PQgetisnull().
Change-Id: Ie83ee577b082dbe9d9ca2e86212a281abebdde6e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The code used to fall back to anonymous login independently for username
and password; however, it should only use a fall-back password if the
username is missing or (case-insensitive) "anonymous". When a
non-anonymous username is given without password, we should simply skip
he PASS message to FTP.
If the FTP server requests a password, in the latter case, QFtp will
signal authenticationRequired; in all cases, if the server rejects the
given credentials, QFtp signals authenticationFailed. Either way, the
client code can then query the user for credentials as usual.
Task-number: QTBUG-25033
Change-Id: I2a4a3b2725819ab19c8a7e4baa431af539edcd8d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
setData()'s default implementation for QListWidget, QTableWidget, and
QTreeWidget treats Qt::EditRole and Qt::DisplayRole as referring to the
same data. Used the same sentence from QStandardItem::setData for
consistency.
Task-number: QTBUG-11549
Change-Id: I41d06bdaaa8e7d4a86e24147b3d8222ad7823a6c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
qt5_add_binary_resources() macro did not recompile for CMake generated
input before this patch.
Adding the input files to the DEPENDS option corrects this issue:
Task-number: QTBUG-60714
Change-Id: I0f46918c6f1079fed7ee1b21305b18ff38f863f8
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: I981e4bfdf679bf755665748e9d3b389a94561e55
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
When applying fallback fonts to characters that are joined by
ZWJ or ZWNJ, we also have to set the same font for the control
characters, otherwise we will split the text and the necessary
shaping will not take place. This was reported for emojis, but
will probably also happen for Indic scripts where joiners are
used predominately.
[ChangeLog][QtGui][Text] Fixed ZWJ and ZWNJ control characters
when fallback fonts are in use.
Task-number: QTBUG-65519
Change-Id: Ia37233f3319b95af68ae6053c29997eac65448e0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After we stopped sanitizing the fallback font list (with change
6ca48a847a), we now need to make
sure it is ordered so that the fonts that support the writing
system in question are always tested first, otherwise we can end up
loading a lot of fonts that will never be used.
Task-number: QTBUG-65605
Change-Id: Id2a65bbff3e64e6d6e6b4f72500778ee3e811e84
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Introduce a special hash modeled on the one used for QFileSystemWatcher
on Windows.
Task-number: QTBUG-31103
Task-number: QTBUG-64147
Change-Id: I69ebabe841716e4957ae3fb04fa5c43d233a3552
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
