Compile on Windows, add command line options to activate the
various tests.
Task-number: QTBUG-38858
Change-Id: I38c6a9a6711831b2bd8b6ea051dd19615cc911a1
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
It was always constructing a QUrl from the string causing the warning
"Non-native QFileDialog supports only local files" with the
new QUrl-based implementations of getOpenFileUrl(), etc.
Change-Id: Idd9bb432a48865df137f8f39f53014dda150ffe9
Reviewed-by: David Faure <david.faure@kdab.com>
So far, we had to listen to the QObject::destroyed signal from the QScreen
class to figure out whether a screen was removed. Often, this is already
too late, given that most of the QWindows have been moved by then and we
don't get to react before the windows are being set to the primary screen.
This patch introduces a new signal that will notify about a screen removal
before the screen is started to be destroyed, so that the application gets
to decide what to do with the screens before Qt decides to move things around.
[ChangeLog][QtGui][QGuiApplication] Added QGuiApplication::screenRemoved
signal to inform that a screen has been removed, before Qt reacts to it.
Change-Id: I99304179f4d345cae581a87baac6cff7b8773dea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
When navigating with the directional keys or tab/backtab, there are
certain situations where the cell that is edited is incorrect.
For example, consider the table below.
'^' represents the starting cell and the direction of navigation.
'c' represents the index that is arrived at as the currentIndex prior to this patch as
reported by view.selectionModel()->currentIndex().
'x' is the cell that should be edited:
+---+---+---+---+
| | | e | |
+---+---+---+---+
| | x | |
+---+ +---+
| | c | |
+---+---+---+---+
| | | ^ | |
+---+---+---+---+
Before this patch, the cell that will actually be edited is c, rather
than x, so after editing the cell and pressing enter, the previous
contents of the cell will still be shown.
With this patch, currentIndex() will be changed after every call to
cursorMove(). Navigation into and out of cells is not affected because
the visualCursor member in the QTableViewPrivate tracks the keyboard
navigation entry point. If after the up navigation into the span, the
user presses up, the cell entered is 'e', not the cell above 'x'.
Task-number: QTBUG-29239
[ChangeLog][QtWidgets][QTableView][QTableWidget] currentIndex() now
reflects the top left cell when in a span.
Change-Id: I3dc3db46ebba340102860fc4ad98fcaf91484983
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On Windows, it is possible to pass native Windows paper source
ids >= DMBIN_USER to QPrinter::setPaperSource() and they are
listed by supportedPaperSources().
Task-number: QTBUG-38897
Task-number: QTBUG-38888
Change-Id: I8f1264e80ce5bdddd3873602200b24eabee00502
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add also a manual test application. For GLX there is an autotest since
that is likely to be run on one of the CIs. For EGL and especially
eglfs this is likely not the case so a manual test is better.
Task-number: QTBUG-37552
Change-Id: Ib09db5d909befb68d16f69abd401a56abe55f28a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Now menu items and key shortcuts for Cut, Copy, Paste and Select All
work in the standard ways in dialogs such as the file dialog, provided
that the corresponding QActions have been created and added to the menu.
This depends on new roles to identify each menu item which is so
broadly applicable that it should work even when a native widget has
focus; but the role will be auto-detected, just as we were already
doing for application menu items such as Quit, About and Preferences.
When the QFileDialog is opened, it will call
redirectKnownMenuItemsToFirstResponder() which will make only those
"special" menu items have the standard actions and nil targets. When
the dialog is dismissed, those NSMenuItems must be reverted by calling
resetKnownMenuItemsToQt(), because to invoke a QAction, the NSMenuItem's
action should be itemFired and the target should be the
QCocoaMenuDelegate.
Task-number: QTBUG-17291
Change-Id: I501375ca6fa13fac75d4b4fdcede993ec2329cc7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add all the available QPrinter options to the QPrintDialog manual test
to allow for testing presets.
Change-Id: Ia6394094fc9920da0d6c645793d51650404899d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Convert the manual print dialogs test to use a ui file as subsequent
changes will add a lot more widgets.
Change-Id: I06ac54b67532f0eea1e91a2d9aca4f587d2fa332
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add a new QPA class to abstract Print Devices. Each platform instance
will encapsulate all required details about a print device instead of
the code being distributed throughout the print engine and print
plugin.
Change-Id: I7f6a537ad55a6e7f599d83f461b1e2ee62b15094
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
At least if the platform plugin's QPlatformOpenGLContext implementation
supports it.
This completes the QOpenGLFunction changes necessary for dynamic loading
of the OpenGL implementation. Everything else is up to the platform plugin.
Change-Id: I710e6fbee3005360ecf02bc6ef976e1beb513819
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
This fixes the issue that the blitter required sometimes the
texture wrapping to be repeat
Change-Id: I86150d008422facf9040873b0983b0e44be9ad24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Origin for Target rect was deemed a confusing concept. The current
implementation would translate the target rect to the coordinate system
specified. However, the order and "direction" of the vertices would
always be the same. So drawing a texture in for one target rect defined in
one coordinate system would paint the texture the same way as it would
when a texture was drawn for a target rect drawn in the "opposite"
coordinate system. The point with this was that if you wanted to "flip"
the texture you would specify that with the source coordinate system.
However, this approach breaks on different levels, such as QRect has functions
which expects a top left coordinate system (ie. top() and bottom()).
In the end Qt uses a top left coordinate system, hence QWindow specifies
a top left coordinate system, and hence the api becomes easier if it is
not possible to define the coordinate system of the target viewport.
Change-Id: I7dd59b3718380876e87a4bff88381d7a1c7d58c1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Integrate with QOpenGLTextureBlitter, QOpenGLWidget and friends.
Change-Id: Ic2867b713a21a3d2820d546174fc9164b3dd220c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Enable child widgets (without a native window) that render to an FBO
and are composed with the raster backingstore by the platform plugin.
A preliminary version of QOpenGLWidget is included as private API.
Change-Id: I8f984a4d7db285069ce3d6564707942c823d890d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Useful for bug reports and test logs.
[ChangeLog][QtCore] QLibraryInfo provides information on how
Qt was built.
Change-Id: I867197fd7d2e10bcdf01a8eb47c9c1e03647e2c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... which is needed to negotiate the SPDY protocol.
[ChangeLog][QtNetwork][QSslConfiguration] Added support for the Next
Protocol Negotiation (NPN) TLS extension.
Task-number: QTBUG-33208
Change-Id: I3c945f9b7e2d2ffb0814bfdd3e87de1dae6c20ef
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
private api, but useful for 2d gui code that suddenly finds itself
needing to get a set of textures onto some fbo
I didn't want to include ARB_copy_image since it looks like its from
texture/renderbuffer -> texture/renderbuffer while this class implies
texture -> write fbo. We could wrap ARB_copy_image in QOpenGLTexture or
some other class or we can add it later.
I have not added any QOpenGLTexture functions since this class opperates
on the GLuint identifier. We can add overloads later.
Change-Id: I3e565b33466c1c183a249a33c3e82c6786debd55
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Showing, moving and resizing
Contrarily to what an NSWindow does to its NSViews, child NSWindows need
to be explicitly shown and hidden, and clipped if the parent NSWindow
changes geometry. Also, hiding an NSWindow will not hide its child
windows. This needed to be managed manually, adding 2 additional states
to QCocoaWindow to reflect whether a child window has been clipped out by
any ancestor geometry change, or hidden by any ancestor being hid. Also,
ordering out an NSWindow will remove it fromm its parent's child windows
array, making necessary to maintain a parallel list of child windows in
QCocoaWindow.
Stack order
Although child NSWindows can be ordered relatively to each other, they
need to be added again to be moved lower in the window stack. This also
means the windows above it need to be added on top.
Key (focus) status
One of the remaining issues, is to make sure the top level window keeps
the "key status" while still forwarding key events to the child window.
Keeping same event propagation
This use case is best illustrated with undocking QDockWidgets (if these
are child NSWindows). The main issue is to make sure the QDockArea will
get the mouse events right after undocking a dock widget. We used a similar
workaround as the "key status" problem, and manually forward the mouse
events to the dock area's QWindow.
Manual test, by Morten Johan Sørvig, included.
Task-number: QTBUG-33082
Task-number: QTBUG-22815
Change-Id: I50e34936fb82bff013e99f4bcb3bd0db0704c6ae
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
... to have a real world test case for uploading via SSL,
QHttpMultiPart (+ resetting) etc.
Change-Id: I004dd6f2507776b2fb8ebe1f02625b40abff6261
Reviewed-by: Richard J. Moore <rich@kde.org>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Press and hold is an interaction available on many platforms,
particularly when touch is involved. In Qt Quick this is exposed to the
user via MouseArea::onPressAndHold. This value should not be hard-coded,
but rather use a platform-specified default. This commit adds the
low-level hooks necessary for that to happen.
Task-number: QTBUG-24793
Change-Id: I621a8ac9de66b881e34336228056bffbb6306a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
It is probably better not to have a default boolean in
QHeaderView::setResizeContentsPrecision
Task-number: QTBUG-34665
Change-Id: I0bb2c35abc1d5713bb3ee65df3af86c04f175a38
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Allowing for creating a printer in various modes
and toying with the paper settings.
Task-number: QTBUG-34276
Change-Id: Ieb35dc55c509f84d7d81817c7903e02a41ba8b44
Reviewed-by: John Layt <jlayt@kde.org>
Sometimes it is nice to be able to replace a widget in a layout.
Change-Id: I23a6a65e417e94d53bc48639503db1a142bc3f10
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Currently just a convenience method for setNameFilters(), it uses
QMimeType to create a name filter from the glob patterns and
description defined in each MIME type.
In the longer term, this API could be used to do proper mimetype-based
filtering using QMimeDatabase::mimeTypeForFile() in the builtin
QFileDialog (aka "not native"), instead of only looking at globs via the
name filters.
Change-Id: I0edccf5f30c514481b47cd100d743d1ed7a24024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
In delegates we get into trouble with calling showPopup in
setEditorData (edit by double click) - and that is not reasonable.
The user has requested edit - and therefore it is natural to save
a click for the user and show the popup at once.
However that fails since we have the mouse down and as soon as we
release the mouse we will call hidePopup.
This patch ensures that the mouseReleaseEvent, that caused the
problem is only considered if we have had a mousePressEvent.
Change-Id: Ibe031fcb9ad2158f6969e41127bbb5f651b9cae6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Even though detailed text does not work that well, it should still
be in the manual test.
Change-Id: I051f9f0592ad9206dc42f0e9929c1be32baec832
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This patch allows to set which logical index the tree is in.
Before the tree always displayed data from the logical index 0,
but it is actually more likely that the user wants to have data
from visual index 0 (which can be done by special value -1).
There is nothing special about logical index 0, and not being
able to change the tree-data is just annoying.
Change-Id: Ib070ce93343a0d2fbac3ad5a42cb4359401ac87c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For some time, we've assumed that the URL specification had a mistake in
that it didn't allow the "#" character to appear decoded in the
fragment. We've gotten away with it so far.
However, turns out that the CoreFoundation NSURL class doesn't like it.
So we have to be stricter.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %23 found in the fragment to "#" in the output of
toString(QUrl::FullyEncoded) or toEncoded()
Task-number: QTBUG-31945
Change-Id: If5e0fb37bae84710986c9ca89bd69ec98437cd63
Reviewed-by: David Faure (KDE) <faure@kde.org>
This add checks on iterators on insert and erase.
Change-Id: I41d96e038d74668cc1df10b6d42cde4b82f8a696
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a check on erase that the iterator is from the set.
Change-Id: I9f4e127d53a5b1f5f8c70652604f1f5574c73688
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This checks if the iterator argument in erase is valid in debug mode.
Change-Id: I8768f4263d1464ff78986a1a30702e210e561dc1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a check of the iterator values in erase and insert.
Change-Id: I78403dcbd24fd7c6beb86d3c827a8e233963e770
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a check of the iterator values in erase and insert.
Change-Id: I28e660153dbfc5f0054a5b25cba2c5725c678a81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a debug-tests in erase, insert (with hint)
and insertMulti (with hint) that ensures the iterator-argument
is valid (and e.g not from another map)
Change-Id: I7920131bc9712543183cabf13c7603bd0e12880d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was doing tricks with URLs that it shouldn't be doing... including
running QDir::toNativeSeparators on a URL.
Task-number: QTBUG-32311
Change-Id: I5b6f640919956998c00dcf507f931045f21a9e53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Sometimes it is nice that hiding a widget does not affect the
layout. This patch makes that possible by allowing hidden
widgets to take up space.
Change-Id: Ifbc1cdee0e112950acc025919b98199ea9558db7
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This patch does 2 things mainly:
- Adds a QPlatformTheme font type for fixed fonts. It's important
because some OS provide specific monospaced fonts and we want to let
our applications to use the preferred fonts by default.
- Adds a new method and enum to QFontDatabase that expose the font
types that applications might need, so that they can make the
applications use the specific fonts that the system recommends. This
data was already available within Qt through the QPlatformTheme, but
it was not possible to use this data by Qt users. This new method
exposes such data.
Change-Id: Ic194c1e4bc07a70640672afd82ba756b87606985
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
In earlier patches we allowed the user to control the
tooltip duration. However the user still couldn't control
the wake delay and sleep delay.
This patch changes that and is the final patch in solving:
Task-number: QTBUG-1016
Change-Id: I5e2c719737634ad7f371ad03691744612472ae70
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
... to let the user know whether he is on e.g. Wifi, 2G, 3G or 4G.
In most cases, this is what the user wants to know anyhow, while
e.g. BearerEVDO or BearerCDMA2000 go into too much detail.
Task-number: QTBUG-31828
Change-Id: I244a4473feb40e106cbc08e09afdee07d4ecc8d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
This adds a property that specifies how long a tooltip is displayed.
This partly solves:
Task-number: QTBUG-1016
Change-Id: Ieea218bbcb869f6b48e72913d967e74fa792f2e2
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
I.e. let the user know whether he is on 2G / 3G / 4G.
Since usually apps are rather interested whether they are on Wifi or
cellular, change of cellular type (i.e. transition from 3G to 4G etc.)
will not trigger emission of the
"QNetworkConfigurationManager::configurationChanged" signal. The
cellular type check will only be performed if the user queries it by
calling the respective member methods (bearerType() and
bearerTypeName()).
Reading the cellular type takes around 1-2 milliseconds.
In addition, add new fields "BearerEVDO" and "BearerLTE" to the public
API for QNetworkConfiguration.
Change-Id: I4c4ec52926f862b84487c91a88b1e20e590dd793
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
It is nice to be able to control how long time a tooltip is shown.
This is the first part of solving:
Task-number: QTBUG-1016
Change-Id: I8e313df8a2acdc5ccc91d9c8ce956c30c76daf4b
Reviewed-by: David Faure (KDE) <faure@kde.org>
List decorators may be clipped if you set a large font size and/or
small indent for a QTextList. This fix is to prevent clipping by
moving list decorators and items to left (or to right in case of
right to left layouts) so that the list decorator is always painted
inside the layout.
This commit fixes painting related issue, so auto test is not needed.
The manual test program can be used for verification purposes.
Task-number: QTBUG-5111
Change-Id: I7fdd92399445d33fe9eaf525a05fe5cd860b57c6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Currently Qt looks at 1000 rows when scaling a column.
That can be slow in some situations and too inaccurate in others.
With this patch we leave it up to the user to decide how precise
e.g resizeToContents should be.
Change-Id: I6ef60f9a3bb40fc331ce1a1544fdc77488d20ca3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QFontComboBox had convenient filtering options but somehow not
QFontDialog, so provide the same type of flags and a similar behavior.
Change-Id: Ia8efabc60ae795673c772ff8ed63fd49244a5bb9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Folders can have a custom icon, set by the user. Some system
folders also have one, for example c:\windows\fonts.
This option allows you to disable this behavior, you'll get the
folder directory icon.
As a side-effect, you'll get a very big performance improvement
on removable/network media: 2 seconds vs 60 seconds on a SDCard
with 10000 folders.
Change-Id: Id55ea628186e0a6523585ec7a4ff622d6f5da505
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
With QUrl variants of the static methods, it is possible to get to use
VFS facilities of the platform if available.
Since we can't predict if the application will use the VFS available in
the platform or its own mechanisms, an extra parameter is provided to
restrict the protocols allowed to the user. This extra parameter
defaults to no restriction, which is the most convenient if the platform
file dialog and the application use a matching VFS. It's likely to be
the most common use.
Change-Id: I4c9effde9d194d226cd8b7a140eb9036187ba87b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This patch adds SizeAdjustPolicy to QAbstractScrollArea.
If it is set to AdjustToContents it will make use of the new
protected viewportSizeHint() (BC since it was reserved in Qt5).
This function returns a suggested size based on contents.
Change-Id: I5d8aa517e88b8b21c5712e62b4d574c3aad99d3b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This adds Q_DECL_OVERRIDE to the virtual functions in the test.
Change-Id: If1b7646c9a6f50c6efe2d03d253bd8e0b4c09716
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
- Organize the test images into different sizes.
- Add a button and icon drawing test.
- Don't show all tests by default.
Change-Id: I95eff846b8c5159085f53b413dea7212c1ea5071
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Make top-level windows generate enter/leave events
for sub-windows. Keep track of the current "under mouse"
window in mouseMoved and send EnterLeave events when
it changes.
mouseEntered/mouseExited handles enters and leaves
from the top-level window.
Add tests/manual/cocoa/nativewidgets.
Task-number: QTBUG-27550
Task-number: QTBUG-29751
Change-Id: If4b9f9e0f39d9fb05fdab45a100ffdcf107965ad
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Replace <QtWidgets> includes by class includes, remove tests
that do not compile.
Change-Id: I52837e8c567dc8ac365c7d43c37beb9a368f6f72
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Print out available information from QLibraryInfo, QStandardPaths,
QSysInfo, QPlatformIntegration, QStyleHints, QPlatformTheme
and QScreen.
Change-Id: Ia0bdc6174a1748c539acee18ba16a27a48d58ee5
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Adapt to API-changes, exclude network/SSL-tests for Windows.
Change-Id: I80d5ef1bd81e149a2f04fa7644376a8a88b1f7b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Since we currently implement only half of the XEMBED protocol (we lack
the container part), we use a simple XEMBED container built with Gtk+
and PyObject. Using an interpreted language as Python helps us avoiding
a build dependency on Gtk+.
Change-Id: Ibc6282371c6f767e481c8a8ba2b5ca9cdd0d8b82
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This cleans a bit up in the manual test by
a) Removing a weird reference alloration (and replace . with ->)
b) rename for variable from v (which was also the view name) to n.
c) remove a big item in the scene rect that is irrelevant to the test
Change-Id: I49cb319bcc2f4bceef0c96ca86b571b0240a9a92
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The rubberBandRect function is nice to have, but this patch
makes it easier to track the rubber band by emiting a signal
on change.
That makes it easier (and less clumsy/hacky) to show information
related to the rubber band.
Change-Id: If65eb85d743a1804be3fdb823a821423411e9745
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In many situations it is handy to know the rubberband rect.
There are many situations where we want to show something
related to the rubberband.
Regardless how that is done the rubberband area is needed.
(Not having this is a flaw that can force people to do make
a customized rubberband just to get this information)
Change-Id: Ia854db4c0022b6a97b150af2b4bb78fd5e974991
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Make it possible to test the saving/restoring of directories
which is done by default.
Task-number: QTBUG-28855
Change-Id: Id16010b6aea9cd78b9bebdbe1b148eb7f5141f8b
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Modal dialogs can now tested by just showing or running exec().
Remove connection of accept() from applySettings().
Change-Id: I5e3c0e6405ce5682f39d10a9c06b9d61be10ed3f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
make sure we keep track of when we can load root certs and when we
cannot (we cannot when the developer set the certs explicitly). This is
implemented the same way for QSslSocket already, and needs to be
duplicated because we have 2 methods for setting CA certificates: one in
QSslSocket and one in QSslConfiguration.
In addition, adapt the auto test which checks whether setting a default
QSslConfiguration works: There is no way to set on demand loading
through the API, so it should be enabled by default.
Task-number: QTBUG-29103
Change-Id: I5146128aaa385dfcc0ad1e0ef81a92d9350ec5f2
Reviewed-by: Richard J. Moore <rich@kde.org>
Keep the non-modal file dialog around and delete only on request,
such that one can simulate repeated invocations of show() on
the same dialog for testing native dialogs.
Change-Id: I80d0f1dfafbc02a31be192098121654a01025174
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
This patch allows single selection to be cleared with the normal
control modifier. This affects e.g QTreeView and QListView.
Task-number: QTBUG-8836
Change-Id: I7fd50b987acc3552b36657409568192763257536
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add a command line program allowing to test rename, copy, etc.
Task-number: QTBUG-28246
Change-Id: Ie9667f03b65a874475700ec9ecd91ca2ed32ed97
Reviewed-by: David Faure (KDE) <faure@kde.org>
move QT+=widgets (and printsupport) statements before the install
statements, and de-duplicate some cases.
also move some TARGET assignments to a more conventional place.
Change-Id: I6140d8611680f66c24490e5894e4eb90cae95635
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In SHA 51914375b6 the rubberband
selection was fixed, so it followed the scene-point on mousemove.
However wheelEvent could move the view - but avoid update of the
rubberband (that would not be updated until next mouse-move).
This patch fixes that (and generally improves rubberband behavior)
since QGraphicsViewPrivate::mouseMoveEventHandler is called by
replayLastMouseEvent, which is called from various places,
where we need to update the rubberband (e.g scrollContentsBy).
Change-Id: I1b78c27edaaecea797a2319086d7a11d437d2bd3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
There are two ways to register a type: using Q_DECLARE_METATYPE(T) and
using qRegisterMetaType<T>("T"). Doing one thing in one translation
unit and another thing in another TU constitutes an ODR violation,
because the value of QMetaTypeId<T>::Defined will differ in the two
TUs.
By adding the information whether a type was declared with
Q_DECLARE_METATYPE to the typeFlags(), such a use will trigger
the existing binary-incompatibility failure that checks for
equality of the incoming type flags with the stored ones (if any).
I had to encode the type as a defaulted function argument in order
to avoid the linker merging instantiations of the function templates
and therefore rendering the detection moot.
Change-Id: I82017caf300458b411cc8ac2f6653536fac64117
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Manual tests are not supposed to be run by "make check"
Change-Id: I0539b94f5286e89ddad2edf487d4b0d82fc2f374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Bring Qt 5 on par with Qt 4, prepare for more comprehensive
support later on.
Introduce device independent pixels (dips), device pixels,
and devicePixelRatio. Add high-dpi support to QPainter,
QGLWidget, the cocoa platform plugin, mac and fusion styles.
Dips are similar to CSS pixels, Apple points and
Android density-independent pixels. Device pixels
are pixels in the backing store/physical pixels on screen.
devicePixelRatio is the ratio between them, which is
1.0 on standard displays and 2.0 on "retina" displays.
New API:
QImage::devicePixelRatio() and setDevicePixelRatio()
QPixmap::devicePixelRatio() and setDevicePixelRatio()
QWindow::devicePixelRatio()
QScreen::devicePixelRatio()
QGuiApplicaiton::devicePixelRatio()
Change-Id: If98c3ca9bfdf0e1bdbcf7574cd5b912c9ff63856
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It's again possible for QWindows and widget windows to go into
fullscreen mode on the Mac.
Change-Id: I7b304a135838394ef0392f89be4f225f2949fad3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
We should consider the scene-position when we are expanding
moving a rubberband. If the user does some auto-scroll
(Qt should support that itself, but that is another matter)
then the rubberband should not keep the (old) local position
to calculate the rubberband extension, but instead use the
scene-position that was actually clicked.
Change-Id: I04a2df6a1edae8b3587e1ac2104c7fe4ccfb7762
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If we are reacting on the sectionResized signal and we call
setDefaultSectionSize we should ensure that we are not moving
the mouse-cursor.
This is an improvement of f8f6acb05c
Change-Id: I1adee7821bc8fcc9633f692bfd515f2c458b12c8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patch fixes the manual move of sections when auto scroll is on.
It is done in QAbstractItemView::doAutoScroll by letting the
qheaderView use its parents scrollbars if they are childs of a
QTableView or QTreeView.
Task-number: QTBUG-993
Task-number: QTBUG-1103
Change-Id: I70d999d9a07c3566e42d01cc5ebb47a69a83d9d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
