Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This test has been initially blacklisted. However it is racy by design
and cannot be fixed. Removing it.
Change-Id: I6c386a12e54d8a382f17c4fc033428f56eb03f02
Task-number: QTBUG-23837
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Remove the insignificant_test CONFIG option in favor of a BLACKLIST
file. This test has been found failing on OpenSuse in CI.
Change-Id: Ibc6af3c30277fec7e422e8bbeccd9437de2a61ce
Task-number: QTBUG-23837
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When in commit db15341d27 I added support
for testing TXT, I used the space character to make it easy to
concatenate the records. Unfortunately, that means it's easy to false-
positive the test by creating one record with a single entry containing
a space instead of two entries.
So use the NULL character instead.
Change-Id: Ia0aac2f09e9245339951ffff13c7d239ea83583d
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
This allows one to check whether the conversion is successful without
checking for the return result, as the value of 0 represents the valid
IPv4 address 0.0.0.0.
Change-Id: I637fe55583f2255c85b0d955e5886b61494e0c7c
Reviewed-by: Richard J. Moore <rich@kde.org>
In 85136496bc, Shane made QHostAddress
automatically convert any IPv6 address that was v4-mapped to IPv4 in
QHostAddress. While that is an interesting trick, it prevents us from
being specific about what we want. On some OS (like FreeBSD and OS X),
the distinction is relevant, so keep it.
Moreover, it was inconsistent: it might fail depending on how the
QHostAddress was constructed and the order of comparison.
[ChangeLog][Important Behavior Changes] QHostAddress will no longer
convert IPv6 addresses of type "v4-mapped" to IPv4. To perform this
conversion manually, construct another QHostAddress with the result of
toIPv4Address().
Change-Id: I06afbc7018539804bb3044ef1fe6a49ac7a5f240
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit updates the NS records and disables the lookup for
ptr-single.test.qt-project.org, as the new provider does not support
adding PTR records outside of the in-addr.arpa zone.
This commit reverts f9c70128bb, which was
a reversal of 24c52bd44b.
Change-Id: Ia0aac2f09e9245339951ffff13c7cab530a41515
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This reverts commit 24c52bd44b and makes
the Qt unit tests requiring DNS zones to use the temporary test zone in
macieira.org (Thiago's domain).
Change-Id: Ia0aac2f09e9245339951ffff13c6d3752c83b773
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Some of these tests are verifying things that are not supported
on Android, so we XFAIL these cases when we see the appropriate
error message.
Change-Id: I8245266f061c902515bb12251521159a8e19bfb7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The sockaddr_in struct is defined in netinet/in.h header.
Change-Id: I67a3421094c96a5e948968a26723ec8c21f85c93
Reviewed-by: BogDan Vatra <bogdan@kde.org>
tested manually with internal proxy.
Patch-by: Jonathan Lauvernier <Jonathan.Lauvernier@gmail.com>
Change-Id: Ief5b4579b3444ce70eb99637edf771d37d3971fb
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise you get:
undefined reference to `qt_qhostinfo_clear_cache()'
Change-Id: I32313f290b9e4236440ae01afe12285d4539be60
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Flip !Q_OS_IOS conditions to Q_OS_MACX where it seems appropriate,
remove a redundant condition in qtextcodec_p.h.
Change-Id: I21c8c0c490f1eb4a9337a7f2f3e907c125489438
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The TXT record is particular because each RR can contain multiple text
strings. So we need to join each RR's texts too.
To make it easy, I've made everything be QStrings.
Change-Id: Ia0506544b913585e7be860c81077cff8e0dab547
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DNS protocol changes the order of the RRs in each reply it sends,
in an effort to balance the load in servers. For most tests, to ensure
that we get always the same result, we simply sort it back.
For MX and SRV, we can't sort because we also need to test that
QDnsLookup sorted correctly according to priority. So instead allow
that test to have multiple alternatives.
Change-Id: I5c119f907b31789de5c9cf2471cc82ecd140d06f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I also modified tst_QDnsLookup the test to use ';' as a separator as
opposed to spaces because I added MX and SRV records with multiple
RRs.
Change-Id: I62c7b6ad342c1bb23c4d9ac9730e35ab422e3ea2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
ignoreProxyFor() always returned true if the no_proxy was not set,
which resulted in the first token being an empty QByteArray, causing
the endsWith() check to always evaluate to true.
Add a unit test that is enabled for those platforms that use the generic
system proxy.
Change-Id: I6081ad5e0b8e2c3fee1568835907c32bde5b7772
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
... but only if the QNetworkConfiguration manager requires one.
Change-Id: I1c69c43438f1df9080d207c8598a42201f759c5b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qt.nokia.com is also going to disapper in future, so I think it is better
to use qt-project.org.
Change-Id: Ice550fe657a33609472b8e4b8630d7649f9c9fb5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
